Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Analog control of La0.5Sr0.5FeO3-δ electrical properties through oxygen deficiency induced magnetic transition

  • Nizet, Paul
  • Chiabrera, Francesco Maria|||0000-0001-8940-2708
  • López-Pintó, Nicolau|||0000-0001-5145-6153
  • Alayo Bueno, Nerea|||0000-0002-0414-9246
  • Langner, Philipp|||0000-0003-1305-7826
  • Valencia, Sergio|||0000-0002-3912-5797
  • Fraile Rodríguez, Arantxa|||0000-0003-2722-0882
  • Baiutti, Federico|||0000-0001-9664-2486
  • Smekhova, Alevtina|||0000-0003-0946-2909
  • Morata, Alex|||0000-0002-3300-4636
  • Sort, Jordi|||0000-0003-1213-3639
  • Tarancón Rubio, Albert|||0000-0002-1933-2406
Switchability of materials properties by applying controlled stimuli such as voltage pulses is an emerging field of study with applicability in adaptive and programmable devices like neuromorphic transistors or non-emissive smart displays. One of the most exciting approaches to modulate materials performance is mobile ion/vacancy insertion for inducing changes in relevant electrical, optical, or magnetic properties, among others. Unveiling the interplay between changes in the concentration of mobile defects (like oxygen vacancies) and functional properties in relevant materials represents a step forward for underpinning the emerging oxide iontronics discipline. In this work, electrochemical oxide-ion solid-state pumping cells were fabricated for analog control of the oxygen stoichiometry in thin films of mixed ionic-electronic conductor La0.5Sr0.5FeO3-δ. We demonstrate over more than four orders of magnitude electronic conductivity control at 50 °C within the same crystallographic phase through precise and continuous voltage control of the oxygen stoichiometry. We show that behind the modification of the transport properties of the material lays a paramagnetic-to-antiferromagnetic transition. We exploit such magnetoelectric coupling to show control over the exchange interaction between La0.5Sr0.5FeO3-δ and a ferromagnetic Co layer deposited on top.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

The impact of Mn nonstoichiometry on the oxygen mass transport properties of La0.8Sr0.2MnyO3±δ thin films

  • Chiabrera, Francesco M
  • Baiutti, Federico
  • Börgers, Jacqueline M
  • Harrington, George F
  • Yedra, Lluís
  • Liedke, Maciej O
  • Kler, Joe
  • Nandi, Pranjal
  • Sirvent, Juan de Dios
  • Santiso, Jose
  • López Haro, Miguel
  • Calvino Gámez, José Juan
  • Estradé, Sonia
  • Butterling, Maik
  • Wagner, Andreas
  • Peiró, Francesca
  • De Souza, Roger A
  • Tarancón, Albert
  • kler
Oxygen mass transport in perovskite oxides is relevant for a variety of energy and information technologies. In oxide thin films, cation nonstoichiometry is often found but its impact on the oxygen transport properties is not well understood. Here, we used oxygen isotope exchange depth profile technique coupled with secondary ion mass spectrometry to study oxygen mass transport and the defect compensation mechanism of Mn-deficient La0.8Sr0.2Mn (y) O-3 +/-delta epitaxial thin films. Oxygen diffusivity and surface exchange coefficients were observed to be consistent with literature measurements and to be independent on the degree of Mn deficiency in the layers. Defect chemistry modeling, together with a collection of different experimental techniques, suggests that the Mn-deficiency is mainly compensated by the formation of La-x(Mn) antisite defects. The results highlight the importance of antisite defects in perovskite thin films for mitigating cationic nonstoichiometry effects on oxygen mass transport properties.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The impact of Mn nonstoichiometry on the oxygen mass transport properties of La0.8Sr0.2Mn y O3±δ thin films

  • Chiabrera, Francesco
  • Baiutti, Federico
  • Börgers, Jacqueline M.
  • Harrington, George F.
  • Yedra, Lluís
  • Liedke, Maciej O.
  • Kler, Joe
  • Nandi, Pranjal
  • Sirvent, J.
  • Santiso, José
Oxygen mass transport in perovskite oxides is relevant for a variety of energy and information technologies. In oxide thin films, cation nonstoichiometry is often found but its impact on the oxygen transport properties is not well understood. Here, we used oxygen isotope exchange depth profile technique coupled with secondary ion mass spectrometry to study oxygen mass transport and the defect compensation mechanism of Mn-deficient LaSrMn O epitaxial thin films. Oxygen diffusivity and surface exchange coefficients were observed to be consistent with literature measurements and to be independent on the degree of Mn deficiency in the layers. Defect chemistry modeling, together with a collection of different experimental techniques, suggests that the Mn-deficiency is mainly compensated by the formation of La Mn × antisite defects. The results highlight the importance of antisite defects in perovskite thin films for mitigating cationic nonstoichiometry effects on oxygen mass transport properties., This research was supported by the funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No. 101017709 (EPISTORE) and the 'Generalitat de Catalunya' (2017 SGR 1421, NANOEN). LY acknowledges support from the MINECO (Spain) through the IJC2018-037698-I grant. MICIIN projects PID2019-106165GB-C21 and RED2018-102609-T are also acknowledged. PN acknowledges the support from the AGAUR through the 2021 FI_B 00157 Grant. RADS acknowledges funding from German Research Foundation (DFG) from project DE 2854/12-1 and from the collaborative research center SFB917 'Nanoswitches'. J S acknowledges the financial support of the Spanish Ministry of Economy, Industry and Competitiveness (Project: PID2019-108573GB-C21).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A self-assembled multiphasic thin film as an oxygen electrode for enhanced durability in reversible solid oxide cells

  • Buzi, Fjorelo
  • Kreka, Kosova
  • Santiso, José
  • Rapenne, Laetitia
  • Sha, Zijie
  • Douglas, James O.
  • Chiabrera, Francesco
  • Morata, Alex
  • Burriel, Mónica
  • Skinner, Stephen J.
  • Bernadet, Lucile
  • Baiutti, Federico
  • Tarancón, Albert
The implementation of nanocomposite materials as electrode layers represents a potential turning point for next-generation of solid oxide cells in order to reduce the use of critical raw materials. However, the substitution of bulk electrode materials by thin films is still under debate especially due to the uncertainty about their performance and stability under operando conditions, which restricts their use in real applications. In this work, we propose a multiphase nanocomposite characterized by a highly disordered microstructure and high cationic intermixing as a result from thin-film self-assembly of a perovskite-based mixed ionic-electronic conductor (lanthanum strontium cobaltite) and a fluorite-based pure ionic conductor (samarium-doped ceria) as an oxygen electrode for reversible solid oxide cells. Electrochemical characterization shows remarkable oxygen reduction reaction (fuel cell mode) and oxygen evolution activity (electrolysis mode) in comparison with state-of-the-art bulk electrodes, combined with outstanding long-term stability at operational temperatures of 700 °C. The disordered nanostructure was implemented as a standalone oxygen electrode on commercial anode-supported cells, resulting in high electrical output in fuel cell and electrolysis mode for active layer thicknesses of only 200 nm (>95% decrease in critical raw materials with respect to conventional cathodes). The cell was operated for over 300 h in fuel cell mode displaying excellent stability. Our findings unlock the hidden potential of advanced thin-film technologies for obtaining high-performance disordered electrodes based on nanocomposite self-assembly combining long durability and minimized use of critical raw materials., This project received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 101017709 (EPISTORE), the Government of Catalonia (2021 SGR 00750), and the Marie Skłodowska-Curie grant agreement no. 840787 (Thin-CATALYzER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High performance La2NiO4+δ oxygen and Ni–Ce0.9Gd0.1O2−δ fuel electrodes for thin film reversible solid oxide cells

  • Riaz, Adeel
  • Sirvent, Juande
  • Zueco-Vincelle, Juan
  • Buzi, Fjorelo
  • Panisset, Silvère
  • Stangl, Alexander
  • Rapenne, Laetitia
  • Baiutti, Federico
  • Mermoux, Michel
  • Laguna-Bercero, M. A.
  • Tarancón, Albert
  • Burriel, Mónica
Thin film reversible solid oxide cells (TF-rSOCs) are attracting a great deal of interest as they promise to operate at much lower temperatures (400–600 °C) than state-of-the-art commercial fuel electrode-supported cells (600–800 °C). However, in all-ceramics TF-rSOCs the high polarization resistance of the electrodes limits the cell performance. To overcome this limitation, high performing oxygen and fuel electrodes were selected and their nanostructure was optimized. Thin nanoporous films of La2NiO4+δ were deposited as oxygen electrode by Pulsed Injection Metal Organic Chemical Vapor Deposition (PI-MOCVD) with different thickness. As for the fuel electrode, thin films of Ni–Ce0.9Gd0.1O2−δ (NiCGO) were deposited by Pulsed Laser Deposition (PLD) at various temperatures and pO2. The electrochemical activity of the oxygen and fuel electrodes was measured by Electrical Conductivity Relaxation (ECR) and Electrochemical Impedance Spectroscopy (EIS), respectively. The optimized electrodes were then deposited on a YSZ single crystal electrolyte and the cell was measured in fuel cell and electrolysis modes showing high performance with a power density of 70 mW cm−2 at 0.7 V and a current density of −44 mA cm−2 at 1.3 V at a low operating temperature of 600 °C. These results demonstrate the potential of using these materials as electrodes in TF-rSOCs., This project has received funding from the European Union's Horizon 2020 Research and Innovation Program under grant agreements no. 824072 (Harvestore project) and no. 101017709 (EPISTORE project) and by the Centre of Excellence of Multifunctional Architectured Materials ‘CEMAM’ no. ANR-10-LABX-44-01 as part of the ‘Investments for the Future’ Program. This research has benefited from characterization equipment of the Grenoble INP – CMTC platform. The authors also acknowledge support from the Generalitat de Catalunya (2021-SGR-00750, NANOEN). This research has also received funding from PID2022-137626OB-C31 (MCIU/AEI/FEDER, UE), NextGenerationEU (PRTR-C17.I1) and T02_23R (DGA) grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Leveraging Grain Boundary Effects for Nanostructured Electrode Layers in Symmetric Solid Oxide Fuel Cells

  • Baiutti, F.
  • Chiabrera, F.
  • Anzengruber, Marlene
  • Kreka, Kosova
  • Sirvent, J.
  • Yedra, Lluis
  • Buzi, F.
  • Liedke, Macej Oskar
  • Cavallaro, Andrea
  • Carmona Zuazo, Albert
  • Estradé, Sonia
  • Butterling, Maik
  • Hirschmann, Eric
  • Wagner, Andreas
  • Aguadero, Ainara
  • Peiró, Francisca
  • Tarancon, Albert
[Data Availability Statement] The data that support the findings of this study are openly available in [Zenodo] at [https://doi.org/10.5281/zenodo.14535944], reference number [14535944]., While grain boundary engineering is attracting great interest as a potential strategy to fabricate highly electrochemically active materials, open questions remain in relation to the fundamental mechanisms of local property enhancement as well as to the potential technological impact of such nanostructuring strategies. In this paper, the ability to turn a predominantly electronic conductor into an excellent mixed-ionic electronic conductor by grain boundary doping is demonstrated for nanocrystalline films of lanthanum chromite. A four-orders-of-magnitude increase in the oxygen diffusion coefficient at grain boundaries is observed, and related to local chemical changes. It is shown that grain boundary effects can be effectively exploited for technological purposes by fabricating a proof-of-concept symmetric solid oxide cell based on lanthanum chromite film electrodes. The cell is operated under reversible gas feeding conditions, exhibiting electrode self-healing characteristics. The results provide new insights on the fundamental aspects of fast grain boundary oxygen diffusion and validate grain boundary engineering as a technologically relevant strategy for the realization of solid oxide cells with enhanced performance., This project received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 101017709 (EPISTORE) and by the European Union under HorizonEU research and innovation program OxyBatt (101158721) – European Innovation Council. LY, SE, and FP work is supported by the Spanish projects PID2022-138543NB-C21 and TED2021-129663B-C55 funded by MCIU/AEI/10.13039/501. 10001103 and European Union NextGeneration EU/PRTR and the project 2021SGR00242 from Generalitat de Catalunya. The authors acknowledge the support received from the ICTS ELECMI (Electron Microscopy for Materials Science). LY acknowledges support from the Spanish Ministry for Science and Innovation through the Ramón y Cajal fellowship (RYC2022-037722-I). FP acknowledges the ICREA Academia 2022 grant. AA acknowledges the Spanish national project PID2021-122477OB-I00. This work was partially supported by the Initiative and Networking Fund of the Helmholtz Association (FKZ VH-VI-442 Memriox), and the Helmholtz Energy Materials Characterization Platform (03ET7015). The Surface Analysis Laboratory of the CCiTUB (Lorenzo Calvo Barrio and Laura Garcia Carreras) is acknowledged for carrying the XPS measurements., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

High performance La2NiO4+δ oxygen and Ni–Ce0.9Gd0.1O2−δ fuel electrodes for thin film reversible solid oxide cells

  • Riaz, Adeel
  • Sirvent, Juande
  • Zueco-Vincelle, Juan
  • Buzi, Fjorelo
  • Panisset, Silvère
  • Stangl, Alexander
  • Rapenne, Laetitia
  • Baiutti, Federico
  • Mermoux, Michel
  • Laguna-Bercero, Miguel Angel
  • Tarancón, Albert
  • Burriel, Mónica
Thin film reversible solid oxide cells (TF-rSOCs) are attracting a great deal of interest as they promise to operate at much lower temperatures (400–600 °C) than state-of-the-art commercial fuel electrode-supported cells (600–800 °C). However, in all-ceramics TF-rSOCs the high polarization resistance of the electrodes limits the cell performance. To overcome this limitation, high performing oxygen and fuel electrodes were selected and their nanostructure was optimized. Thin nanoporous films of La2NiO4+δ were deposited as oxygen electrode by Pulsed Injection Metal Organic Chemical Vapor Deposition (PI-MOCVD) with different thickness. As for the fuel electrode, thin films of Ni–Ce0.9Gd0.1O2−δ (NiCGO) were deposited by Pulsed Laser Deposition (PLD) at various temperatures and pO2. The electrochemical activity of the oxygen and fuel electrodes was measured by Electrical Conductivity Relaxation (ECR) and Electrochemical Impedance Spectroscopy (EIS), respectively. The optimized electrodes were then deposited on a YSZ single crystal electrolyte and the cell was measured in fuel cell and electrolysis modes showing high performance with a power density of 70 mW cm−2 at 0.7 V and a current density of −44 mA cm−2 at 1.3 V at a low operating temperature of 600 °C. These results demonstrate the potential of using these materials as electrodes in TF-rSOCs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A high-entropy manganite in an ordered nanocomposite for long-term application in solid oxide cells

  • Baiutti, Federico|||0000-0001-9664-2486
  • Chiabrera, Francesco Maria|||0000-0001-8940-2708
  • Acosta, Matias|||0000-0001-9504-883X
  • Diercks, David|||0000-0002-5138-0168
  • Parfitt, D.
  • Santiso, José|||0000-0003-4274-2101
  • Wang, X.
  • Cavallaro, Andrea|||0000-0002-6688-1643
  • Morata, Alex|||0000-0002-3300-4636
  • Wang, Haiyan|||0000-0002-7397-1209
  • Chroneos, A.
  • Driscoll, Judith|||0000-0003-4987-6620
  • Tarancón Rubio, Albert|||0000-0002-1933-2406
The implementation of nano-engineered composite oxides opens up the way towards the development of a novel class of functional materials with enhanced electrochemical properties. Here we report on the realization of vertically aligned nanocomposites of lanthanum strontium manganite and doped ceria with straight applicability as functional layers in high-temperature energy conversion devices. By a detailed analysis using complementary state-of-the-art techniques, which include atom-probe tomography combined with oxygen isotopic exchange, we assess the local structural and electrochemical functionalities and we allow direct observation of local fast oxygen diffusion pathways. The resulting ordered mesostructure, which is characterized by a coherent, dense array of vertical interfaces, shows high electrochemically activity and suppressed dopant segregation. The latter is ascribed to spontaneous cationic intermixing enabling lattice stabilization, according to density functional theory calculations. This work highlights the relevance of local disorder and long-range arrangements for functional oxides nano-engineering and introduces an advanced method for the local analysis of mass transport phenomena. Electrode functional layers for solid oxide cells require a combination of high reactivity and thermal stability. Here, the authors present a self-assembled vertically aligned nanocomposites of lanthanum strontium manganite and doped ceria as functional layers for high temperature applications.