Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

How can the filler-polymer interaction in mixed matrix membranes Be enhanced?

  • Hasan, Md. Rafiul
  • Coronas, Joaquín
Mixed matrix membranes (MMMs) constitute a type of molecular separation membranes in which a nanomaterial type filler is dispersed in a given polymer to enhance its selective permeation ability. The key issue in MMMs is the establishing of a proper filler-polymer interaction to avoid non-selective transport paths while increasing permeability but also to improve other membrane properties such as aging and plasticization. Along the pass years several strategies have been applied to enhance the physicochemical interaction between the fillers (e. g. silicas, zeolites, porous coordination polymers, carbonaceous materials, etc.) and the membrane polymers: increase of external surface area, priming, use of intrinsically more compatible fillers, in situ synthesis of filler, in situ polymerization, polymer side-chain modification and post-synthetic modification of filler., This work acknowledges grants PID2022-138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), TED2021-130621B-C4 (funded by MCIN/AEI/10.13039/501100011033/ and by and the European Union-NextGeneration EU) and CEX2023-001286-S (funded by MICIU/AEI/10.13039/501100011033). Financial support from “the Government of Aragón (T68-23R)” is also thanked., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thin film nanocomposite membranes based on renewable polymer Pebax® and zeolitic imidazolate frameworks for CO2/CH4 separation

  • Refaat, Dalia
  • Yahia, Mohamed
  • Coronas, Joaquín
This study investigates the impact of integrating Pebax® Rnew® 30R51, a sustainable elastomer-type copolymer material, with zeolitic imidazolate frameworks (ZIFs) to develop advanced membranes for CO2/CH4 gas separation. The fabrication process of ZIF/Pebax® Rnew® 30R51 thin films was optimized to achieve uniform and defect-free thin film composite (TFC) membranes. Crucial membrane properties, including permeability, selectivity and separation efficiency, were analyzed with variations in ZIF type, loading levels, film thickness and operating conditions. Additionally, the resulting TFC and ZIF/Pebax® Rnew® 30R51 thin film nanocomposite (TFN) membranes were subjected to characterization via FTIR, XRD, TGA and SEM to evaluate their physicochemical properties. Nanoparticles of ZIF-8, NH2-ZIF-8 and ZIF-94 were individually added (at 5–15 wt% loadings) to the Pebax® Rnew® 30R51 matrix to develop the CO2 separation efficiency. The pristine TFC membrane showed a 66 GPU CO2 permeance and a 37.5 CO2/CH4 separation selectivity, primarily due to improved CO2 mass transport. Upon inclusion of ZIFs, the CO2 permeance with 5 wt% loadings of ZIF-8, NH2-ZIF-8 and ZIF-94 increased to 148, 99 and 125 GPU, respectively, despite this, the CO2/CH4 separation selectivity maintained at 29.4, 37.0 and 27.0, respectively., This work acknowledges grants PID2022–138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), TED2021–130621B-C4 (funded by MCIN/AEI/10.13039/501100011033/ and by and the European Union-NextGeneration EU) and CEX2023–001286-S (funded by MICIU/AEI /10.13039/501100011033). M. Yahia was supported through “the María Zambrano program” funded by both “the European Union's Next-Generation-EU” and “the Spanish Ministerio de Universidades”. Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. Technical guidance and instrumentation provided by “the Universidad de Zaragoza” through “the national facility ELECMI ICTS Laboratorio de Microscopías Avanzadas” and “the Servicio General de Apoyo a la Investigación-SAI” are thanked., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancing CO2/CH4 separation performance in PIM-1 based MXene nanosheets mixed matrix membranes

  • Yahia, Mohamed
  • Refaat, Dalia
  • Coronas, Joaquín
  • Téllez, Carlos
This study presents an approach by integrating MXene nanosheets (Ti2C3Tx) into polymer of intrinsic microporosity (PIM-1) matrix to develop mixed matrix membranes (MMMs) for biogas upgrading. Different concentrations (1–5 wt%) of MXene were incorporated into PIM-1, and the resulting materials were characterized to 1H NMR, FTIR, XRD, TGA, nitrogen adsorption, SEM and EDS to assess their physicochemical properties. The research focused on evaluating the gas separation performance, particularly CO2/CH4 separation, as well as the aging behavior of the MMMs. The incorporating of MXene nanosheets significantly enhanced the CO2 permeability and selectivity of PIM-1 by enhancing gas solubility and diffusivity. The most promising results were observed at 5 wt% filler loading, achieving a 13.5 CO2/CH4 separation selectivity at 7652 Barrer of CO2 permeability. In all membranes with aging time (60 days), there was a decrease in CO2 permeability and a slight increase in CO2/CH4 selectivity, observing that the introduction of MXene slightly mitigates the physical aging process in the PIM-1 polymer. Additionally, the permeability tests revealed higher CO2 permeability and (CO2/CH4) selectivity values for mixed gases compared to single gases. Overall, the study highlights the potential of MXene/PIM-1 MMMs as effective materials for CO2/CH4 separation, outperforming pristine PIM-1., This recent investigation is acknowledging the grants: 1. PID2019-104009RB-I00 (funded by MICIU/AEI/10.13039/501100011033/), 2. PID2022-138582OB-I00 (funded by MICIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), 3. TED2021-130621B-C4 (funded by MICIU/AEI/10.13039/501100011033/ and The “European Union Next-Generation-EU/PRTR”), 4. CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. M. Yahia's is supported through “the María Zambrano program” funded by both “the European Union's Next-Generation-EU” and “the Spanish Ministerio de Universidades”. Financial assistance from “the Government of Aragón (T68_23R)” is also recognized. Furthermore, technical guidance and instrumentation provided by “the Universidad de Zaragoza/UNIZAR” through “the national facility ELECMI ICTS”, “the Servicio General de Apoyo a la Investigación-SAI”, and “Laboratorio de Microscopías Avanzadas”, are appreciated., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Amphiphilic zeolitic imidazolate framework for improved CO2 separation in PIM-1 mixed matrix membranes

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Mayoral, Álvaro
  • Martínez-Visus, Iñigo
  • Foster, Andrew B.
  • Budd, Peter M.
  • Coronas, Joaquín
This study aims to enhance the compatibility between filler and polymer in mixed matrix membranes (MMMs), addressing an important challenge in membrane development. ZIF-94, known for its affinity to CO2, was partially modified with 2-undecylimidazolate (umIm) through the solvent-assisted ligand exchange (SALE) method to improve its compatibility with the prototypical polymer of intrinsic microporosity PIM-1. The modified ZIF-94 (ZIF-94-umIm) can be considered as an amphiphilic MOF with both hydrophilic and hydrophobic moieties, while maintaining a considerably high CO2 adsorption capacity (2.34 mmol g-1 at 90 kPa and 0 °C). Gas separation experiments were performed using mixed gas compositions of 15/85 CO2/N2 at 3 bar and 35 °C. The resulting MMM with a 5 wt.% loading exhibited an enhanced CO2 separation performance, with ca. 70% and 10% increases in CO2 permeability (8900 Barrer) and CO2/N2 selectivity (20.2), respectively, compared to pristine PIM-1 membranes. In addition, thin film nanocomposite membranes were prepared showing a 23.5 CO2/N2 selectivity at 2350 GPU of CO2. This modification strategy shows a great potential for improving the CO2 capture technologies, highlighting the potential of tailoring MOF fillers for advanced membrane materials in gas separation applications., This work acknowledges grants PID2022-138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), TED2021-130621B-C4 (funded by MCIN/AEI/10.13039/501100011033/ and the European Union-NextGeneration EU), and CEX2023-001286-S (funded by MICIU/AEI /10.13039/501100011033). Financial support from the Aragón government (GA), T68-23R, and M. P.-M. PhD grant, is also gratefully acknowledged. J. M. Luque-Alled acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the Margarita Salas and Juan de la Cierva-Formación programmes. A. Mayoral acknowledges the Spanish MCN (RYC2018-024561-I and CNS2023-144346) and GA (E13_23R). A.B. Foster acknowledges EPSRC Programme Grant EP/V047078/1 “SynHiSel”., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Amphiphilic Zeolitic Imidazolate Framework for Improved CO2 Separation in PIM-1 Mixed Matrix Membranes

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Mayoral, Álvaro
  • Martínez-Visus, Íñigo
  • Foster, Andrew B.
  • Budd, Peter M.
  • Coronas, Joaquín
This study aims to enhance the compatibility between filler and polymer in mixed matrix membranes (MMMs), addressing an important challenge in membrane development. ZIF‐94, known for its affinity to CO2, was partially modified with 2‐undecylimidazolate (umIm) through the solvent‐assisted ligand exchange (SALE) method to improve its compatibility with the prototypical polymer of intrinsic microporosity PIM‐1. The modified ZIF‐94 (ZIF‐94‐umIm) can be considered as an amphiphilic MOF with both hydrophilic and hydrophobic moieties, while maintaining a considerably high CO2 adsorption capacity (2.34 mmol g−1 at 90 kPa and 0 °C). Gas separation experiments were performed using mixed gas compositions of 15/85 CO2/N2 at 3 bar and 35 °C. The resulting MMM with a 5 wt.% loading exhibited an enhanced CO2 separation performance, with ca. 70% and 10% increases in CO2 permeability (8900 Barrer) and CO2/N2 selectivity (20.2), respectively, compared to pristine PIM‐1 membranes. In addition, thin film nanocomposite membranes were prepared showing a 23.5 CO2/N2 selectivity at 2350 GPU of CO2. This modification strategy shows a great potential for improving the CO2 capture technologies, highlighting the potential of tailoring MOF fillers for advanced membrane materials in gas separation applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Innovative starch-PVA membranes incorporating amino-functionalized Zeolitic Imidazolate frameworks for CO2/CH4 separation

  • Refaat, Dalia
  • Amenakpor, Jacking
  • Coronas, Joaquín
  • Zornoza, Beatriz
The growing need for efficient CO2 separation in natural gas purification and carbon capture has driven the advancement of high-performance membrane technologies. This study incorporates the zeolitic imidazolate framework ZIF-8-NH2 into blends of polysaccharide starch and polyvinyl alcohol (PVA) to fabricate eco-friendly membranes. These materials, prepared as dense mixed matrix membranes (MMMs) and thin-film nanocomposite (TFN) membranes, offer a sustainable solution for CO2/CH4 separation. The integration of ZIF-8-NH2 nanoparticles, recognized for their high crystallinity and surface area and selective adsorption capacity into the starch–PVA matrix (33/67 blend ratio), significantly enhances CO2 permeability, increasing from 124 to 188 Barrer at 10 wt% loading, while preserving high CO2/CH4 selectivity (14.1 for the pristine blend and 16.5 for the MMM). For TFNs, a 9/91 starch-PVA matrix with 15 wt% ZIF-8-NH2 incorporated into the selective layer resulted in the best conditions. This architecture provided robust mechanical stability and high separation performance, yielding a CO2 permeance of up to 208 GPU and a CO2/CH4 selectivity of 26.9 at 3 bar feed pressure, nearly doubling the selectivity compared to the dense biopolymer blend. This work highlights the potential of renewable, starch-based materials in membrane-based gas separation, contributing to sustainable solutions for natural gas purification and carbon capture.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mixed matrix membranes of PIM-1 incorporating MOF-808 functionalized with amino acids for enhanced CO2/CH4 separation

  • Refaat, Dalia
  • Yahia, Mohamed
  • Martínez-Hernández, Harol David
  • Jiménez-Ruiz, Monica
  • Galván, Vanessa
  • Petrenko, Viktor
  • Fernández de Luis, Roberto
  • Coronas, Joaquín
This study investigates the enhancement of CO2/CH4 separation performance in mixed matrix membranes (MMMs) by incorporating amino acid-functionalized MOF-808 (MOF-808@AA; AA = Lys, Arg and Cys) into a polymer of intrinsic microporosity (PIM-1) matrix. MMMs containing 10 wt% MOF-808@AA were fabricated via solution casting. The structural and physicochemical properties of PIM-1, MOF-808@AA, and the resulting MMMs were characterized using 1H-NMR, FTIR, TGA, SEM, XRD, SAXS, N2/77 K and CO2/15 °C isotherms, and high-pressure CO2 adsorption. Collectively, the characterization results confirm the successful incorporation of MOF-808@AA into the PIM-1 membranes, with no detectable alteration of the nanostructure of the PIM-1 matrix. Gas separation measurements revealed a notable increase in both CO2 permeability and CO2/CH4 selectivity upon incorporation of MOF-808@AA fillers. Among the tested membranes, the PIM-1/MOF-808@Lys MMM functionalized with lysine exhibited the best performance, achieving a CO2 permeability of 14 354 ± 201 Barrer and a CO2/CH4 selectivity of 26.4 ± 1.8. Aging effects were also studied, showing a reduction in CO2 permeability accompanied by a slight increase in selectivity over time. In addition, the single and mixed gas experiments at elevated pressures (up to 6 bar) showed that CO2 permeability under mixed gas conditions was slightly higher than in single gas experiments, supporting the potential of these MMMs for application in realistic CO2/CH4 separation processes under practical operating conditions. Inelastic neutron scattering (INS) and density functional theory (DFT) calculations confirmed that CO2 molecules preferentially interact with the amino groups introduced by AA functionalization. DFT simulations further revealed that while CO2 and CH4 access similar adsorption sites, the interaction energy of CO2 with amino groups is approximately three times higher than that of CH4. These findings demonstrate that MOF-808@AA fillers can significantly enhance the CO2-philicity of PIM-1-based MMMs, offering a promising approach for efficient CO2/CH4 separation compared to pristine PIM-1 or unmodified PIM-1/MOF-808 composites.