Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Modification of polymeric hollow fibers by microfluidics for gas separation

  • Zornoza, Beatriz
  • Malankowska, Magdalena
  • Paseta, Lorena
  • Echaide‐Górriz, Carlos
  • Téllez, Carlos
  • Coronas, Joaquín
Resumen del póster presentado a la Conferencia EuroMembrane, celebrada en Copenhague (Dinamarca) del 28 de noviembre al 2 de diciembre de 2021. Main topic: Gas separation., The majority of the current energy is produced from burning fossil fuels, being it electricity, fuel or gas. Without a doubt these processes result in the emission of carbon dioxide to the atmosphere. CO2 holds a major share in causing dramatic climate changes and its impact can now be seen on the world panorama. Gas streams focused on the separation of CO2 from CH4 is one of the possible remediation technologies, especially important for the gas industry. Membranes can provide an eco-friendly and low energy consumption alternative to traditional separation techniques. Various membranes with different structures have been studied for this purpose and thin film composite (TFC) membranes being especially attractive due to their high performance thanks to their small thicknesses (ca. 50 nm) and possibility of modification with porous nanoparticles (e.g. metal-organic frameworks (MOF)). In general, the structure of these membranes, usually prepared by interfacial polymerization, enables that the chemistry and porosity of both layers are changed separately. In this work, we focused on synthesizing a continues MOF layer on the lumen side of the hollow fibre instead of MOF being dispersed in the polymeric matrix. Gas separation with MOF based thin-film nanocomposite membranes represent a unique opportunity to produce a technology breakthrough able to address the environmental tasks just mentioned. Until now the fabrication of these membranes has been mainly demonstrated with a single hollow fiber (HF) [1,2]. Thus, another goal of this work is the implementation of the microfluidic synthesis methodology at larger scale and to increase the number of HF membranes that can be modified simultaneously of up to 10. Briefly, the synthesis procedure involves using three syringe pumps and pumping of first: metal salt, second: ligand, and third: methanol to the inner side of the polysulfone hollow fiber. The fabricated containing a thin selective MOF layer mini-modules are tested in a gas separation set-up provided of gas chromatograph for the estimation of the membrane performance., This project has received funding from the European Union´s Horizon 2020 research and innovation program under grant agreement No 862330 (INNOMEM project). Also, financial support from the research project PID2019-104009RBI00/AEI/10.13039/501100011033 from the AEI is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Preparation of thin selective MOF layer on hollow fibers by microfluidic technology for molecular separations

  • Zornoza, Beatriz
  • Malankowska, Magdalena
  • Paseta, Lorena
  • Echaide‐Górriz, Carlos
  • Téllez, Carlos
  • Coronas, Joaquín
Trabajo presentado a la 20th International Zeolite Conference, celebrada en Valencia (España) del 3 al 8 de julio de 2022., This project has received funding from the European Union´s Horizon 2020 research and innovation program under grant agreement No 862330 (INNOMEM project). Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microfluidic preparation of thin film composite hollow fiber membrane modules for water nanofiltration: Up-scaling, reproducibility and MOF based layers

  • Esteras-Saz, Javier
  • Paseta, Lorena
  • Echaide‐Górriz, Carlos
  • Malankowska, Magdalena
  • Luque-Alled, José Miguel
  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
[Background] The commercialization of thin film composite (TFC) hollow fiber (HF) membranes remains challenging owing to issues associated with membrane manufacturing., [Methods] TFC membranes were synthesized by microfluidic interfacial polymerization of polyamide (PA) on polysulfone hollow fiber (HF) membrane modules. A total of 33 HF membrane modules were prepared with different number of HFs (from 1 to 25) and different lengths (from 10 to 50 cm). They were evaluated in a nanofiltration operation in terms of water permeance and rose Bengal (RB) and MgSO4 rejections., [Significant findings] Among the 33 modules, 73% showed RB rejections higher than 95%, while 36% of the modules reached rejections above 99%. During the membrane synthesis, different parameters, such as PA monomer concentration, residence time and reaction time, were studied. As a result, the amount of monomer was reduced by ca. 80%. The versatility of microfluidics allowed incorporating hydrophilic metal-organic framework (MOF) ZIF-93 to produce HF modules with PA/MOF bilayered membranes (a continuous layer of MOF between the support and the PA film) which led to an important enhancement of the water permeance from 1.3 (bare PA membrane) to 5.3 L·m−2·h−1·bar−1 (PA/ZIF-93 HF membrane), maintaining RB rejection above 95%., This work has been performed in the frame of the INNOMEM project that has received funding from the European Union's Horizon 2020 Research and Innovation Program under Grant Agreement N° 862330. In addition, financial support from the Research Project PID2019-104009RB-I00/AEI/10.13039/501100011033, the Aragón Government (T68-23R), and the ESF are gratefully acknowledged. J. M. Luque-Alled acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the Margarita Salas and Juan de la Cierva programmes., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Microfluidic preparation of thin film composite hollow fiber membrane modules for water nanofiltration: Up-scaling, reproducibility and MOF based layers

  • Esteras-Saz, Javier
  • Paseta, Lorena
  • Echaide-Górriz, Carlos
  • Malankowska, Magdalena
  • Luque-Alled, José M.
  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
Background The commercialization of thin film composite (TFC) hollow fiber (HF) membranes remains challenging owing to issues associated with membrane manufacturing. Methods TFC membranes were synthesized by microfluidic interfacial polymerization of polyamide (PA) on polysulfone hollow fiber (HF) membrane modules. A total of 33 HF membrane modules were prepared with different number of HFs (from 1 to 25) and different lengths (from 10 to 50 cm). They were evaluated in a nanofiltration operation in terms of water permeance and rose Bengal (RB) and MgSO4 rejections. Significant findings Among the 33 modules, 73% showed RB rejections higher than 95%, while 36% of the modules reached rejections above 99%. During the membrane synthesis, different parameters, such as PA monomer concentration, residence time and reaction time, were studied. As a result, the amount of monomer was reduced by ca. 80%. The versatility of microfluidics allowed incorporating hydrophilic metal-organic framework (MOF) ZIF-93 to produce HF modules with PA/MOF bilayered membranes (a continuous layer of MOF between the support and the PA film) which led to an important enhancement of the water permeance from 1.3 (bare PA membrane) to 5.3 L·m−2·h−1·bar−1 (PA/ZIF-93 HF membrane), maintaining RB rejection above 95%.