Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Highly-efficient growth of cobalt nanostructures using focused ion beam induced deposition under cryogenic conditions: Application to electrical contacts on graphene, magnetism and hard masking

  • Salvador-Porroche A.
  • Sangiao S.
  • Magén C.
  • Barrado M.
  • Philipp P.
  • Belotcerkovtceva D.
  • Kamalakar M.V.
  • Cea P.
  • Teresa J.M. de
Emergent technologies are required in the field of nanoelectronics for improved contacts and interconnects at nano and micro-scale. In this work, we report a highly-efficient nanolithography process for the growth of cobalt nanostructures requiring an ultra-low charge dose (15 µC cm-2, unprecedented in single-step charge-based nanopatterning). This resist-free process consists in the condensation of a ~28 nm-thick Co2(CO)8 layer on a substrate held at -100 °C, its irradiation with a Ga+ focused ion beam, and substrate heating up to room temperature. The resulting cobalt-based deposits exhibit sub-100 nm lateral resolution, display metallic behaviour (room-temperature resistivity of 200 µO cm), present ferromagnetic properties (magnetization at room temperature of 400 emu cm-3) and can be grown in large areas. To put these results in perspective, similar properties can be achieved by room-temperature focused ion beam induced deposition and the same precursor only if a 2 × 103 times higher charge dose is used. We demonstrate the application of such an ultra-fast growth process to directly create electrical contacts onto graphene ribbons, opening the route for a broad application of this technology to any 2D material. In addition, the application of these cryo-deposits for hard masking is demonstrated, confirming its structural functionality. This journal is © The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Direct-write of tungsten-carbide nanoSQUIDs based on focused ion beam induced deposition

  • Sigloch, Fabian
  • Sangiao, Soraya
  • Orús, Pablo
  • de Teresa, José M.
NanoSQUIDs are quantum sensors that excel in detecting a small change in magnetic flux with high sensitivity and high spatial resolution. Here, we employ resist-free direct-write Ga+ Focused Ion Beam Induced Deposition (FIBID) techniques to grow W–C nanoSQUIDs, and we investigate their electrical response to changes in the magnetic flux. Remarkably, FIBID allows the fast (3 min) growth of 700 nm × 300 nm nanoSQUIDs based on narrow nanobridges (50 nm wide) that act as Josephson junctions. Albeit the SQUIDs exhibit a comparatively low modulation depth and obtain a high inductance, the observed transfer coefficient (output voltage to magnetic flux change) is comparable to other SQUIDs (up to 1300 μV/Φ0), which correlates with the high resistivity of W–C in the normal state. We discuss here the potential of this approach to reduce the active area of the nanoSQUIDs to gain spatial resolution as well as their integration on cantilevers for scanning-SQUID applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanoscale direct-write fabrication of superconducting devices for application in quantum technologies

  • De Teresa, José María
In this Perspective article, we evaluate the current state of research on the use of focused electron and ion beams to directly fabricate nanoscale superconducting devices with application in quantum technologies. First, the article introduces the main superconducting devices and their fabrication by means of standard lithography techniques such as optical lithography and electron beam lithography. Then, focused ion beam patterning of superconductors through milling or irradiation is shown, as well as the growth of superconducting devices by means of focused electron and ion beam induced deposition. We suggest that the key benefits of these resist-free direct-growth techniques for quantum technologies include the ability to make electrical nanocontacts and circuit edit, fabrication of high-resolution superconducting resonators, creation of Josephson junctions and superconducting quantum interference device (SQUIDs) for on-tip sensors, patterning of high-Tc SQUIDs and other superconducting circuits, and the exploration of fluxtronics and topological superconductivity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Roadmap for focused ion beam technologies

  • Höflich, Katja
  • Hobler, Gerhard
  • Allen, Frances I.
  • Wirtz, Tom
  • Rius, Gemma
  • McElwee-White, Lisa
  • Krasheninnikov, Arkady V.
  • Schmidt, Matthias
  • Utke, Ivo
  • Klingner, Nico
  • Osenberg, Markus
  • Córdoba, Rosa
  • Djurabekova, Flyura
  • Manke, Ingo
  • Moll, Philip
  • Manoccio, Mariachiara
  • De Teresa, José María
  • Bischoff, Lothar
  • Michler, Johann
  • De Castro, Olivier
  • Delobbe, Anne
  • Dunne, Peter
  • Dobrovolskiy, Oleksandr V.
  • Frese, Natalie
  • Gölzhäuser, Armin
  • Mazarov, Paul
  • Koelle, Dieter
  • Möller, Wolfhard
  • Pérez-Murano, Francesc
  • Philipp, Patrick
  • Vollnhals, Florian
  • Hlawacek, Gregor
The focused ion beam (FIB) is a powerful tool for fabrication, modification, and characterization of materials down to the nanoscale. Starting with the gallium FIB, which was originally intended for photomask repair in the semiconductor industry, there are now many different types of FIB that are commercially available. These instruments use a range of ion species and are applied broadly in materials science, physics, chemistry, biology, medicine, and even archaeology. The goal of this roadmap is to provide an overview of FIB instrumentation, theory, techniques, and applications. By viewing FIB developments through the lens of various research communities, we aim to identify future pathways for ion source and instrumentation development, as well as emerging applications and opportunities for improved understanding of the complex interplay of ion–solid interactions. We intend to provide a guide for all scientists in the field that identifies common research interest and will support future fruitful interactions connecting tool development, experiment, and theory. While a comprehensive overview of the field is sought, it is not possible to cover all research related to FIB technologies in detail. We give examples of specific projects within the broader context, referencing original works and previous review articles throughout.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

FIB-fabrication of superconducting devices based on Bi2Se3 junctions

  • Gracia-Abad, Rubén
  • Sangiao, Soraya
  • Balakrishnan, Geetha
  • De Teresa, José María
Recent advances in quantum technologies are highly influencing the current technological scenario. Hybrid devices combining superconductors and topological insulators represent an excellent opportunity to study the topological superconducting phase, which offers interesting features that might have significant implications in the development of quantum sensing and quantum computing. Furthermore, focused ion beam techniques, whose versatility enables to create sophisticated devices with high degree of customization, can enhance the creation of complex devices. Here, we develop a novel approach for creating single-crystal devices that is applied to the fabrication of superconducting devices based on topological insulator Bi2Se3 in a geometry characteristic of a superconducting quantum interference device. Characterization of these devices reveals that superconductivity is induced in our crystal and the supercurrent is modulated by applying an external magnetic field. These results open the way to tailoring the response of hybrid devices that combine superconductors and topological insulators by focused ion beam techniques.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fabrication of palladium-enriched metallic structures by direct focused He<sup>+</sup> and Ne<sup>+</sup> beam nanowriting from organometallic thin films: a comparison with Ga<sup>+</sup> and e<sup>-</sup> beams

  • Herrer, Lucía
  • Salvador-Porroche, Alba
  • Hlawacek, Gregor
  • Cea, Pilar
  • De Teresa, José María
A direct nanowriting procedure using helium- and neon-focused ion beams and spin-coated organometallic thin films is introduced and applied to the fabrication of Pd-enriched metallic structures in a single lithography step. This process presents significant advantages over multi-step resist-based lithography and focused beam-induced deposition using gaseous precursors, such as its simplicity and speed, respectively. The optimized process leads to Pd-rich structures with low electrical resistivity values of 141 and 152 μΩ cm under Ne+ or He+ fluences of 1000 and 5000 μC cm−2, respectively. These resistivity values correlate well with compositional and microstructural studies, indicating a high Pd metallic content in a dense structure with a few-nm grain size. The obtained results are compared to similar structures fabricated by direct electron and gallium beam nanowriting, demonstrating the full potential of nanopatterned Pd-based organometallic thin films under the most common focused charged beams. The practical applications of combining spin-coated organometallic thin films with focused beam nanowriting in micro- and nano-lithography modern procedures are also discussed in this contribution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electrical gating based on ion and electron beam irradiation of PdAc films: Application to superconducting nanowires

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Cea, Pilar
  • De Teresa, José María
Focused ion beam (FIB) is a nanopatterning technique commonly used for material removal, but in combination with a precursor material it gives rise to additive nanomanufacturing, of great interest in nanotechnology and semiconductor applications. The precursor material can be delivered onto the substrate either in the gas form, through a gas-injection system, or in thin-film form, through spin coating. Recently, it has been found that the electrical resistance of spin-coated PdAc organometallic films submitted to FIB irradiation can be metallic at an optimized ion dose, without the need of any post-processing purification step. On the other hand, if such PdAc films are submitted to low-dose focused electron beam irradiation (FEB), they become an insulating material. Here, we combine the use of FIB and FEB irradiation to produce (additively) micro- and nano-structured materials that act as gates in electronic devices. Three different gate configurations have been explored and applied to suppress superconductivity in metallic nanowires through electric-field effects, including lateral and top gating. This new fabrication technique for investigation of electrical gating effects at the micro- and nano-scales stands out by its precision and resolution (due to the use of focused charged beams), by the absence of sacrificial resist layers, and by the process speed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Metastability in Individual Magnetic Vortices at Low Temperatures

  • García-Pons, David
  • Pérez-Bailón, Jorge
  • Méndiz, Arturo
  • Júlvez, Violeta
  • Hack, Martin
  • Wurster, Katja
  • Kleiner, Reinhold
  • Koelle, Dieter
  • Martínez-Pérez, Maria Jose
Magnetic vortices are relevant in fields like biomedicine, data storage, and quantum technologies. For quantum applications, it is crucial to have nanoparticles free from metastable configurations and with narrow switching field distributions, especially at very low temperatures, where vortex nucleation and annihilation have rarely been studied. This work shows that these properties are strongly influenced by the shape of the nanoparticle, with an even greater impact at low temperatures. To investigate this, high‐transition‐temperature nanoscopic Superconducting Quantum Interference Devices are used to detect the magnetization of individual permalloy nanodiscs that host a magnetic vortex. Both the sensors and the nanodiscs are fabricated using focused ion beam milling, and each nanodisc is carefully attached to the sensor using a micromanipulator inside a dual‐beam microscope. The measurements allow to explore the complex energy landscape that governs vortex nucleation and annihilation at the nanoscale, particularly at low temperatures. This study quantifies how likely it is for the system to get trapped in metastable states and shows that this can be minimized by carefully controlling the nanoparticle's shape during fabrication. This study's data thus illustrate how ion beam nanofabrication enables precise control over nanoparticle morphology, with significant implications for their performance.