Skip to main content

NANOSISTEMAS LIPOSOMALES MAGNETICOS DE RESPUESTA COMBINADA A RADIOFRECUENCIA Y ULTRASONIDO PARA LIBERACION DE FARMACOS

PID2019-106947RB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dependence of the composition, morphology and magnetic properties with the water and air exposure during the Fe1-yO/Fe3O4 core–shell nanoparticles synthesis

  • Lohr, Javier
  • Vásquez Mansilla, Marcelo
  • Gerbaldo, M. V.
  • Moreno, M. Sergio
  • Tobia, Dina
  • Goya, Gerardo F.
  • Winkler, Elin L.
  • Zysler, Roberto Daniel
  • Lima Jr., Enio
The thermal decomposition of organometallic precursors in the presence of surfactants and a long-chain alcohol is a valuable method to synthesize magnetic nanoparticles (MNPs) because it provides good control of the final morphology and crystallinity of the magnetic material. These parameters, and consequently the magnetic properties, depend on several details of the experimental procedure of chemical synthesis. We have studied the role of the pre-decomposition step, heating the system to 373–393 K in inert gas flux, on the final composition and morphology of the system. By adding this intermediate step, we were able to produce MNPs with a Fe1-yO/Fe3O4 core–shell structure and sizes of 20–25 nm. When the same synthesis protocol was used skipping the pre-decomposition stage, monophasic MNPs of 11 nm with ferrite structure were obtained. These differences in the composition have a major effect on the resulting magnetic properties of MNPs, and are related to some by-reactions in the synthesis solution during the preparation procedure., The authors acknowledge the financial support of the Argentinian Agencia Nacional de Promoción de Ciencia y Tecnológica (ANPCyT) through the project nos. PICT-2016–0288 and PICT-2018–02565. The authors also thank the Universidad Nacional de Cuyo (UNCuyo) by the financial support through the project nos. 06/C527 and 06/C528. The authors also acknowledge the support of the EU commission under the grant H2020-MSCA-RISE-2016, SPICOLOST project no. 734187. GFG thanks the Spanish Ministerio de Ciencia, Innovación y Universidades by the partial financial support through project PID2019-106947RB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Energy evolution, stabilization, and mechanotransducer properties of Fe3O4 vortex nanorings and nanodisks

  • Niraula, Gopal
  • Toneto, Denilson
  • Joshy, Elma
  • Coaquira, Jose A. H.
  • Ayesh, Ahmad I.
  • Garcia, Flavio
  • Muraca, Diego
  • Denardin, Juliano C.
  • Goya, Gerardo F.
  • Sharma, Surender K.
Recent reports on spin structures produced in nanomaterials due to confinement of spins imposed by geometrical restrictions are at the center of rising scientific interest. Topological curling magnetic structures (vortices) exhibit unique properties, regarding the energy profile, good colloidal stability in suspensions, manipulation under a low-frequency magnetic field, and torque exertion. The last property provides the potential to mechanically eradicate cancer cells via magnetomechanical actuation using remote ac magnetic fields. Here, we study, theoretically and by micromagnetic simulations, the magnetic energy evolutions for vortex nanosystems, i.e., Fe3O4 nanodisks (NDs) and nanorings (NRs). The obtained results for magnetic energy, magnetic susceptibility, and magnetization reversal confirm that the vortex-domain structure in NRs exhibits better stability and avoids agglomeration in solution, owing to the presence of a central hole, whereas the presence of a vortex core in NDs induces magnetic remanence. Although NDs are found to exert slightly higher torques than NRs, this weakness can be compensated for by a small increase (i.e., approximately equals 20%) in the amplitude of the applied field. Our results provide evidence of the magnetic stability of the curling ground states in NRs and open the possibility of applying these systems to magnetomechanical actuation on single cells for therapeutics in biomedicine, such as cancer-cell destruction by low-frequency torque transduction., G.N. is grateful to the Brazilian funding agency CAPES and PPGF-UFMA for providing a doctorate fellowship. S.K.S. is grateful to PPGF-UFMA for support in this project. J.A.H.C. thanks CNPq and FAPDF for financial support. J.C.D. thanks ANID/Fondecyt Grant No. 1200782 for financial support. G.F.G. acknowledges partial financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (Project No. PID2019-106947RB-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Next generation of nanozymes: A perspective of the challenges to match biological performance

  • Goya, Gerardo F.
  • Mayoral, Álvaro
  • Winkler, Elin L.
  • Zysler, Roberto Daniel
  • Bagnato, C.
  • Raineri, Mariana
  • Fuentes-García, J. A.
  • Lima Jr., Enio
Nanomaterials with enzyme-like activity have been the spotlight of scientific and technological efforts to substitute natural enzymes, not only in biological research but also for industrial manufacturing, medicine, and environment healing. Notable advancements in this field along the last years relied on to the rational design of single-atom active sites, knowledge of the underlying atomic structure, and realistic ab initio theoretical models of the electronic configuration at the active site. Thus, it is plausible that a next generation of nanozymes still to come will show even improved catalytic efficiency and substrate specificity. However, the dynamic nature of the protein cage surrounding most active sites in biological enzymes adds a flexible functionality that possess a challenge for nanozyme's mimicking of their natural counterparts. We offer a perspective about where the main strategies to improve nanozymes are headed and identify some of the big challenges faced along the road to better performance. We also outline some of the most exciting bio-inspired ideas that could potentially change this field., The authors acknowledge financial support from the EU-Commission (Project Nos. H2020-MSCA-RISE-2020 101007629-NESTOR and 823717-ESTEEM3), the Spanish Ministerio de Ciencia, Innovación y Universidades (Project Nos. RTC-2017-6620-1 and PID2019-106947RB-C21), the Aragon Regional Government (DGA, Project Nos. E28_20R and E13_20R), and Argentinian governmental agency ANPCyT (Project Nos. PICT-2016-0288 and PICT-2015-0883)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of anisotropy, frequency, and interactions in magnetic hyperthermia applications: Noninteracting nanoparticles and linear chain arrangements

  • Valdés, Daniela Paola
  • Lima Jr., Enio
  • Zysler, Roberto Daniel
  • Goya, Gerardo F.
  • De Biasi, Emilio
Efforts by numerous research groups have provided a deeper insight into the physical mechanisms behind the power absorption of single-domain magnetic nanoparticles in magnetic-fluid-hyperthermia applications and theoretical models now account for the main experimental observations. However, the role of all parameters relevant to the magnetic relaxation remains a matter of debate. Here, we employ a nonlinear model for the magnetic relaxation of single-domain magnetic nanoparticles with uniaxial effective anisotropy and evaluate the influence of particle-intrinsic parameters as well as experimental conditions on the power absorption of both noninteracting and interacting systems (linear arrangements). These effects are assessed through the enclosed hysteresis area of the magnetization loops as a function of relative anisotropy hK (the anisotropy field with respect to the amplitude of the ac field), i.e., the “area curve” of the system. These curves can be divided into four regions with distinct magnetic responses and boundaries that depend on the particle size, frequency of the applied field and interactions. Interactions change the effective anisotropy of the system and shift the area curve towards lower hK values. For the low relative anisotropy range, dipolar interactions increase the area of the hysteresis loops [thus, the specific power absorption (SPA)], while they are detrimental or produce nonsignificant effects for the range of high relative anisotropy. Our study resolves seemingly contradictory results of interaction effects in linear arrangements recently reported in the literature. Simulations of randomly oriented particles and chains were contrasted with the oriented cases. An analytical approach and the thermal interpretation of its validity range are discussed, both aimed at the design of nanoparticles and the choice of the experimental conditions for optimal heating. We find that systems with low-thermal-fluctuation influence are better candidates for the application due to their high SPA values., This work is part of a research project supported by Agencia Nacional de Promoción Científica y Tecnológica (Argentina) under Grants No. PICT-2012-2995 and No. PICT-2015-0883, CONICET. D.P.V., E.L., R.D.Z., and E.D.B. thank Universidad Nacional de Cuyo for supporting us with Project SIIP No. 06/C564. G.F.G. thanks partial financial support from the Spanish Ministerio de Ciencia, Innovacioón y Universidades through Project No. PID2019-106947RB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sonochemical route for mesoporous silica-coated magnetic nanoparticles towards pH-triggered drug delivery system

  • Fuentes-García, J. A.
  • Alavarse, Alex Carvalho
  • Castro, Carlos Eduardo de
  • Giacomelli, Fernando Carlos
  • Ibarra, M. Ricardo
  • Bonvent, Jean Jacques
  • Goya, Gerardo F.
This work reports a pH-triggered release system based on core@shell mesoporous magnetic nanoparticles (MNP@mSiO2) obtained using a simple and rapid ultrasound-assisted method. Performed characterization reveals magnetic cores of Fe2.9Mn0.1O4 (38 ± 6 nm) and specific loss power values adequate for hyperthermia (463 W/g), surrounded by a mesoporous silica shell (10 ± 2 nm) with large surface area (269 m2 g-1) functionalized with hydroxyl groups (-OH). MNP@mSiO2 were loaded with DOX and amino-silane grops, providing pH-triggered DOX release at acidic environments, driving by dipolar intermolecular interactions. The experimental DOX release kinetics at pH 5.5, 6.6 and 7.4 were determined and adjusted to Gompertz dissolution model (Nash–Sutcliffe efficiency coefficient (NSE>0.9)), where the only strongly pH-dependent variable is the percentage of DOX released. The pH-triggered response observed in the system was ~20% of the DOX loaded into the MNP@mSiO2 is released at pH 6.6 or 7.4, whereas up to 80 wt% is released at pH 5.5. Time to 50% of release and dissociation rate of the system remaining constant, suggesting no-pH influence on these parameters. The biological assays highlight negligible hemolytic effect and cytocompatibility of the hybrid material, pointing out the potential use of MNP@mSiO2 as a magnetic driven drug delivery system with pH-triggered drug release kinetics at acidic environments. These results probe the feasibility of sonochemical methods in the elaboration of biocompatible and controlled properties nanomaterials for drug release applications, with the advantage of accurately responses predictions by mathematical model and using minimal processing steps or laboratory equipment., This work was partially supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (project PID2019-106947RB-C21), FAPESP, Brazil (Grant 2014/50983-3) and CAPES, Brazil (Grant 88881.189090/2018-01). FCG acknowledges the financial support provided by FAPESP (Grant 2019/06634-8)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of the distribution of anisotropy constants on the magnetic properties of iron oxide nanoparticles

  • Clarke, D. M.
  • Marquina, Clara
  • Lloyd, David C.
  • Vallejo-Fernández, G.
The distribution of shape anisotropy constants in two colloids of iron oxide nanoparticles has been measured from the distribution of particle elongations within each system. The results are in good agreement with the values calculated from a temperature decay of remanence measurement. For a fluid with a saturation magnetisation of 420 emu/cc and an average particle elongation of ∼ 1.3, the distribution of energy barriers is controlled by both the distribution of particle sizes and particle elongations. For a fluid with a saturation magnetisation of 320 emu/cc and a wide distribution of particle sizes, the energy barrier to reversal can be assumed to be controlled by the distribution of particle volumes. These results highlight the need to take into account the distribution of anisotropy constants when making predictions of the heating properties of assemblies of magnetic nanoparticles for hyperthermia applications., The authors acknowledge fruitful discussions with Prof. Kevin O’Grady (emeritus) from the Department of Physics at the University of York and Liquids Research Ltd. Generous financial support from Liquids Research Ltd. is also greatly appreciated. The authors acknowledge TEM support from Prof. A. Hirohata from the Electronic Engineering department at the University of York. Funding is also acknowledged from EPSRC via their Impact Acceleration Account (EP/R51181X/1). The authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI at Universidad de Zaragoza. These results/publication are part of the project PID2019-106947RB- C21 financed by MCIN/ AEI /10.13039/501100011033. CM also acknowledges financial support from the Regional Government of Aragón (DGA) for financial support through grant E28_20R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene-encapsulated magnetic nanoparticles for safe and steady delivery of ferulic acid in diabetic mice

  • Zhong, Baihua
  • Mateu Roldán, Adán
  • Fanarraga, Mónica L.
  • Han, Wei
  • Muñoz-Guerra, Débora
  • González, Jesús
  • Tao Weng, Lu
  • Ibarra, M. Ricardo
  • Marquina, Clara
  • Lun Yeung, King
Iron nanoparticles encapsulated within graphene shells (Fe@C) were examined for cellular internalization, subcellular behavior, biocompatibility, and influence on cell viability and proliferation. Studies on human lung (adenocarcinoma human alveolar basal epithelial) and skin (epidermoid carcinoma) cells indicate Fe@C is less toxic and more biocompatible than the magnetite nanoparticles coated by an amorphous carbon (Fe3O4@C). Fe3O4@C exhibited more signs of degradation than Fe@C when exposed to murine macrophages (mouse monocyte-macrophages J774). Unlike Fe3O4@C, Fe@C has a high drug loading capacity (0.18 g/g) for ferulic acid, an active pharmaceutical ingredient found in the traditional Chinese herb Angelica sinensis and releases the drug at a constant dosing rate of 8.75 mg/g/day over 30 days. Ferulic acid released by Fe@C injected subcutaneously in diabetic BALB/c mice is effective in lowering the blood glucose level., This work is supported by the Horizon 2020 BIORIMA project and the Hong Kong Research Grant Council E-HKUST601/17 and in part by the Project of Hetao Shenzhen-Hong Kong University of Science and Technology Innovation Cooperation Zone (HZQB-KCZYB-2020083). Dr. B.H. Zhong is a recipient of the HKJEBN Scholarship and his stay at INA is supported by the HKUST Overseas Research Award. The team is also grateful for the funding from the Spanish Ministerio de Economia y Competitividad (MINECO) through projects PI16/00496, PI19/00349, the Spanish Ministerio Ciencia e innovaccion (MICINN) through project DTS19/00033, co-funded by ERDF/ESF, “Investing in Your Future”. These results are part of the project PID2019-106947RB-C21 financed by MCIN/ AEI /10.13039/501100011033. The authors also thank the CSIC (through the project PIE 201960E119) and the Regional Government of Aragón (DGA) for financial support through grant E28_20R. Finally, the authors acknowledge the support of the Central Facilities of the Hong Kong University of Science and Technology including the Material Characterization and Preparation Facility (MCPF), the Environmental Central Facility (ENVF), and the Animal and Plant Care Facility (APCF) and the use of Servicio General de Apoyo a la Investigación-SAI of the University of Zaragoza, and the support from the Advanced Microscopy Laboratory (LMA) of the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Onion-like Fe3O4/MgO/CoFe2O4 magnetic nanoparticles: new ways to control magnetic coupling between soft and hard magnetic phases

  • Nuñez, Jorge M.
  • Hettler, Simon
  • Lima Jr., Enio
  • Goya, Gerardo F.
  • Arenal, Raúl
  • Zysler, Roberto Daniel
  • Aguirre, Myriam H.
  • Winkler, Elin L.
The control of magnetization inversion dynamics is one of the main challenges driving the design of new nanostructured magnetic materials for magnetoelectronic applications. Nanoparticles with an onion-like architecture offer a unique opportunity to expand the possibilities of combining different phases at the nanoscale and also modulating the coupling between magnetic phases by introducing spacers into the same structure. Here, we report the fabrication, by a three-step high temperature decomposition method, of Fe3O4/MgO/CoFe2O4 onion-like nanoparticles and their detailed structural analysis, elemental compositional maps and magnetic response. The core/shell/shell nanoparticles present epitaxial growth and cubic shape with an overall size of (29 ± 6) nm. These nanoparticles consist of a cubic iron oxide core of 22 ± 4nm in size covered by two shells, the inner of magnesium oxide and the outer of cobalt ferrite of thicknesses ∼1 and ∼2.5 nm, respectively. The magnetization measurements show a single reversion magnetization curve and the enhancement of the coercivity field, from HC ∼ 608 Oe for the Fe3O4/MgO to HC ∼ 5890 Oe for the Fe3O4/MgO/CoFe2O4 nanoparticles at T = 5 K, ascribed to the coupling between both ferrimagnetic phases with a coupling constant of Jc = 2 erg cm−2. The system also exhibits an exchange bias effect, where the exchange bias field increases up to HEB ∼ 2850 Oe at 5 K accompanied by the broadening of the magnetization loop of HC ∼ 6650 Oe. This exchange bias effect originates from the freezing of the surface spins below the freezing temperature TF = 32 K that pinned the magnetic moment of the cobalt ferrite shell., The authors acknowledge financial support from Argentinian governmental agency ANPCyT through Grant No. PICT-2019-02059, PICT-2018-02565 and UNCuyo for support through Grants No. 06/C604 and 06/C605. The authors gratefully acknowledge the EU Commission for financial support through MSCA-RISE projects #734187 (SPICOLOST) and #101007629 (NESTOR). SH was supported by the German Research Foundation (DFG project He 7675/1-1). G. F. G. thanks Spanish State Agency AEI for financial support through project PID2019-106947RB-C21. R. A. gratefully acknowledges the support from the Spanish MICINN (PID2019-104739GB-100/AEI/10.13039/501100011033), Government of Aragon (projects DGA E13-20R) and from the European Union H2020 program “ESTEEM3” (Grant number 823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic nanofibers for remotely triggered catalytic activity applied to the degradation of organic pollutants

  • Fuentes-García, J. A.
  • Sanz-Sagué, Beatriz
  • Mallada, Reyes
  • Ibarra, M. Ricardo
  • Goya, Gerardo F.
This work reports on the fabrication and characterization of a novel type of electrospun magnetic nanofibers (MNFs), and their application as a magnetically-activable catalysts for degradation of organic pollutants. The magnetic stimulation capability for the catalytic action is provided by iron-manganese oxide (MnxFe2-xO4) magnetic nanoparticles (MNPs) embedded into electrospun polyacrylonitrile (PAN), which provides stability and chemical resistance. The MNPs (average size d = 40 ± 7 nm) were first obtained by a green and fast sonochemical route, and subsequently embedded into electrospun PAN nanofibers. The final MNFs showed an average diameter of 760 ± 150 nm, providing a superhydrophobic surface with contact angle (θc = 165°), as well as a considerable amount ( 50 % wt.) of embedded MNPs (Mn0.5Fe2.5O4), thermally stable up to temperatures of 330 °C. The catalytic Fe2+/3+/Mn2+/3+/4+ active centers on the MNPs of MNF’s surface could be remotely activated by alternating magnetic fields (AMF) to degrade the methyl blue (MB). Remarkable stability of the MNFs during heating under extreme pH conditions (3 < pH < 10) was observed along several catalytic cycles. The degradation kinetics in presence of hydrogen peroxide showed followed the Langmuir–Hinshelwood model with an average efficiency > 80 %, after several cycles of reusing the same sample without any regeneration process. The capacity of these materials as a catalytic material with magnetic remote activation makes them appealing for those catalytic applications under conditions of darkness or restrained access, where photocatalytic reaction cannot be achieved., The authors acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades, through Projects PDC2021‐121409‐I00 (MICRODIAL) and PID2019-106947RB-C21 (SONOSOME), and the EU Commission for financial support through MSCA-RISE project #101007629 (NESTOR). Access to the facilities of the Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Electrospun magnetic nanofibers for triggered inductive heating and organic pollutants degradation: a characterization dataset

  • Fuentes-García, J. A.
  • Sanz-Sagué, Beatriz
  • Mallada, Reyes
  • Ibarra, M. Ricardo
  • Goya, Gerardo F.
The data presented shows some properties from electrospun nanofibers as a part of the research article “Magnetic nanofibers for remotely triggered catalytic activity applied to the degradation of organic pollutants” (J.A. Fuentes-García et al., 2022 in press). Morphology, composition, thermal behaviour, and magnetic properties data from the obtained magnetic nanofibers were collected using different state-of-art techniques such as: scanning electron microscopy, X-Ray photon spectroscopy, atenuated total reflectance infared spectroscopy, thermogravymetic analysis, diferential scanning calorimetry and superconducting quantum interference device magnetometry. Also, laboratory made setups were used for the contact angle determination and the magnetically triggered inductive heating responses data collection. The collected dataset was described and analysed, showing the related calculations and curves description with useful parameters for the application of magnetic membranes as inductive heating elements and organic pollutants degradation agents., The compositional characterization of the MNFs was performed in a CSEM-FEG Inspect™ F50 Scanning Electron Microscope using EDS mode. All samples were coated with a ≈20 nm thickness carbon layer before observation. Obtained EDS spectra and its analysis allowed to estimate the sample stoichiometry (at %) of the Fe3-xMnxO4 samples using simple equation. Normal modes of vibration from functional groups in the samples were analyzed using Attenuated Total Reflectance Fourier Transform Infrared spectroscopy (ATR FT-IR), the spectra from 4000 to 600 cm-1 were obtained using Bruker VERTEX 70v FT-IR Spectrometer. Thermal analysis of PANFs and MNFs was performed using 1.5 mg of each sample for thermogravimetric analysis (TGA) in a Mettler Toledo TGA SDTA851 analyzer from 50 to 800 ºC interval, heating rate of 10 ºC min-1, N2 purge of 60 mL min-1 in ceramic pan. Also, 1.5 mg of each sample was employed for Differential Scanning Calorimetry (DSC) in a DSC822e Module (Mettler Toledo) from 50 to 500 ºC (1ºC/minute) under N2 atmosphere. The UV-vis spectra of solid membranes composed by PANFs and MNFs (thickness 30 µm) were performed in a JASCO V-670 UV-vis/NIR spectrophotometer (JASCO, Tokyo, Japan) using the solid-state diffuse reflectance technique in a 60 mm UV-vis/NIR with an integrating sphere from 200 nm to 800 nm, scanning step of 10 nm s−1. The optical band-gap energy (Eg) was determined from the reflectance spectra and using the Tauc´s plots F2 vs. hv, where F is the Kubelka-Munk function of the reflectance, h is the Plank constant and ν the frequency. Magnetization curves as a function of temperature and applied field were obtained using a SQUID magnetometer (MPMS XL, Quantum Design) in the -10 k Oe ≤ H ≤ 10 k Oe range at 10 K and 300 K. Conditioned gelatin capsules were filled with ≈1 mg of as-prepared MNFs for these measurements., Ministerio de Ciencia, Innovación y Universidades: PDC2021‐121409‐I00 (MICRODIAL) Ministerio de Ciencia, Innovación y Universidades: PID2019-106947RB-C21 (SONOSOME), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gel transformation as a general strategy for fabrication of highly porous multiscale MOF architectures

  • Liu, Zhang
  • Lopez Navas, Javier
  • Han, Wei
  • Ibarra, M. Ricardo
  • Kwan, Joseph Kai Cho
  • Yeung, King Lun
The structure and chemistry of metal–organic frameworks or MOFs dictate their properties and functionalities. However, their architecture and form are essential for facilitating the transport of molecules, the flow of electrons, the conduction of heat, the transmission of light, and the propagation of force, which are vital in many applications. This work explores the transformation of inorganic gels into MOFs as a general strategy to construct complex porous MOF architectures at nano, micro, and millimeter length scales. MOFs can be induced to form along three different pathways governed by gel dissolution, MOF nucleation, and crystallization kinetics. Slow gel dissolution, rapid nucleation, and moderate crystal growth result in a pseudomorphic transformation (pathway 1) that preserves the original network structure and pores, while a comparably faster crystallization displays significant localized structural changes but still preserves network interconnectivity (pathway 2). MOF exfoliates from the gel surface during rapid dissolution, thus inducing nucleation in the pore liquid leading to a dense assembly of percolated MOF particles (pathway 3). Thus, the prepared MOF 3D objects and architectures can be fabricated with superb mechanical strength (>98.7 MPa), excellent permeability (>3.4 × 10−10 m2), and large surface area (1100 m2 g−1) and mesopore volumes (1.1 cm3 g−1)., This work was supported by the Hong Kong Research Grants Council General Research Fund 16306322, Innovation and Technology Fund (ITS/300/18) of the Hong Kong Innovation and Technology Commission, the Shenzhen Basic Research Program (JCYJ20150630094001158), the Guangzhou Collaborative Innovation Key Program (201704030074), the European Union-Hong Kong Research and Innovation Cooperation Co-funding Mechanism (E-HKUST601/17) from the Hong Kong Research Grants Council, and the European Union's Horizon 2020 (BIORIMA). The mobility cost of Z. L., research exchange at INA, is borne by the grants from the HKUST Overseas Research Award and the Spanish Ministry of Science, Innovation and University (RTC-2017-6620-1 & PID2019-106947RB-C21). This work was supported in part by the project of Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone (HZQB-KCZYB2020083)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Observation of magnetic vortex configuration in non-stoichiometric Fe3O4 nanospheres

  • Niraula, Gopal
  • Toneto, Denilson
  • Goya, Gerardo F.
  • Zoppellaro, Giorgio
  • Coaquira, Jose A. H.
  • Muraca, Diego
  • Denardin, Juliano C.
  • Almeida, Trevor P.
  • Knobel, Marcelo
  • Sharma, Surender K.
Theoretical and micromagnetic simulation studies of magnetic nanospheres with vortex configurations suggest that such nanostructured materials have technological advantages over conventional nanosystems for applications based on high-power-rate absorption and subsequent emission. However, full experimental evidence of magnetic vortex configurations in spheres of submicrometer size is still lacking. Here, we report the microwave irradiation fabrication of Fe3O4 nanospheres and establish their magnetic vortex configuration based on experimental results, theoretical analysis, and micromagnetic simulations. Detailed magnetic and electrical measurements, together with Mössbauer spectroscopy data, provide evidence of a loss of stoichiometry in vortex nanospheres owing to the presence of a surface oxide layer, defects, and a higher concentration of cation vacancies. The results indicate that the magnetic vortex spin configuration can be established in bulk spherical magnetite materials. This study provides crucial information that can aid the synthesis of magnetic nanospheres with magnetically tailored properties; consequently, they may be promising candidates for future technological applications based on three-dimensional magnetic vortex structures., GN is thankful to the Brazilian funding agency CAPES for providing a doctorate fellowship. SKS is very thankful to UGC-DAE Consortium for Scientific Research, India for providing financial support (CSR-IC-ISUM-54/CRS-337/2020-21/795). JAHC thanks CNPq (443652/2018-0) and FAPDF (00193-00000151/2019-20) for the financial support. GZ acknowledges the support from The Czech Science Foundation (22-26416S). GFG acknowledges partial financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (project PID2019-106947RB-C21). J. C. D. thanks CEDENNA (AFB220001) and Fondecyt 1200782 for financial support. MK and DM fully acknowledge the support from Fundação de Amparo à Pesquisa do Estado de São Paulo #21/04058-0, #17/10581-1 and CNPq, Brazilian agencies., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Disruption of the mitochondrial network in a mouse model of Huntington's disease visualized by in-tissue multiscale 3D electron microscopy

  • Martin-Solana, Eva
  • Casado, Laura
  • Torres, Teobaldo E.
  • Goya, Gerardo F.
  • Fernández-Fernández, María Rosario
  • Fernández, José Jesús
Trabajo presentado a: Instruct Biennial Structural Biology Conference Cascais, Lisbon, Portugal 23 – 24th May 2024., Huntington’s disease (HD) is an inherited neurodegenerative disorder caused by an expanded CAG repeat in the coding sequence of huntingtin protein. Initially, it predominantly affects medium-sized spiny neurons (MSSNs) of the corpus striatum. No effective treatment is still available, thus urging the identification of potential therapeutic targets. While evidence of mitochondrial structural alterations in HD exists, previous studies mainly employed 2D approaches and were performed outside the strictly native brain context. In this study, we adopted a novel multiscale approach to conduct a comprehensive 3D in situ structural analysis of mitochondrial disturbances in a mouse model of HD. We investigated MSSNs within brain tissue under optimal structural conditions utilizing state-of-the-art 3D imaging technologies, specifically FIB/SEM for the complete imaging of neuronal somas and Electron Tomography for detailed morphological examination, and image processing-based quantitative analysis. Our findings suggest a disruption of the mitochondrial network towards fragmentation in HD. The network of interlaced, slim and long mitochondria observed in healthy conditions transforms into isolated, swollen and short entities, with internal cristae disorganization, cavities and abnormally large matrix granules., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., This work was supported through grant A-4206 from Cure Huntington's Disease Initiative (CHDI) Foundation, grant CIVP18A3892 from Fundación Ramón Areces, MSCA-RISE project #101007629 and through grants SAF2017-84565-R, PID2019-106947RBC21, TED2021-132020B-I00, PDC2021-121409-I00 and PID2022-139071NB-I00, funded by MCIN/AEI/10.13039/501100011033, by the European Union through “ERDF A way of making Europe” and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Insight into the molecular mechanism of organic pollutants’ adsorption on magnetic ZIF-8 synthesized via a transformational route

  • Liu, Zhang
  • Marquina, Clara
  • Han, Wei
  • Kwan, Joseph Kai Cho
  • Ibarra, M. Ricardo
  • Yeung, King Lun
This study presents the synthesis of Fe3O4@Zeolite Imidazolate Framework-8 (Fe3O4@ZIF-8), a novel magnetic core–shell adsorbent engineered for enhance adsorption of organic pollutants. The process begins with the formation of spherical magnetite aggregates (i.e., Fe3O4) via a solvothermal method, using polyacrylic acid for stabilization and capping. A ZIF-8 shell is then grown through a sol gel process followed by reaction with 2-methylimidazole, resulting in a crystalline shell approximately 60 nm thick. Characterization techniques, including energy dispersive X-ray analysis and X-ray diffraction, confirm the successful preparation of Fe3O4@ZIF-8. The adsorption capabilities were evaluated using methylene blue (MB) and diclofenac sodium (DCF) as model pollutants. Fe3O4@ZIF-8 demonstrated rapid removal efficiencies, with 98 % removal of MB (6.01 × 10-4 mg·g−1·min−1) and DCF (4.43 × 10-4 g·mg−1.min−1) within 15 and 30 min, respectively, significantly outperforming conventional activated carbon. Thermodynamic studies indicate that the adsorption processes are spontaneous; enthalpic changes drive MB adsorption, while DCF is influenced by entropic factors. Molecular modeling reveals preferential adsorption behaviors on different ZIF-8 facets, with stronger interactions for MB due to π-π stacking and hydrogen bonding. These findings underscore the potential of Fe3O4@ZIF-8 as an effective adsorbent for water purification, highlighting its substantial adsorption capacity (73.2 mg·g−1 for MB and 53.8 mg·g−1 for DCF), stability, and reusability., This work was supported by the Hong Kong Research Grants Council General Research Fund (16306322), Innovation and Technology Fund (ITS/300/18), GBA Institute of Collaborative Innovation (GICI-012), the European Union-Hong Kong Research and Innovation Cooperation Co-funding Mechanism by the Research Grants Council (E-HKUST601/17), and the European Union's Horizon 2020 (BIORIMA). The mobility cost of Z. L., research exchange at INA, is borne by the grants from the HKUST Overseas Research Award and the Spanish Ministry of Science, Innovation and University (RTC-2017-6620-1 & PID2019-106947RB-C21). This work was supported in part by the project of Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone (HZQB-KCZYB-2020083)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vanadium incorporation in ferrite nanoparticles serves as an electron buffer and anisotropy tuner in catalytic and hyperthermia applications

  • Torres, Teobaldo E.
  • Valdés, Daniela Paola
  • Hettler, Simon
  • Nuñez, Jorge M.
  • Rodrigo, I.
  • Orue, Iñaki
  • García, J. Á.
  • Plazaola, F.
  • Zysler, Roberto Daniel
  • Lima Jr., Enio
  • Aguirre, Myriam H.
  • Goya, Gerardo F.
  • Arenal, Raúl
Cancer research has gradually shifted its focus from individual therapies to a combination of them for enhanced treatment effectiveness. In particular, the increased interest in the field of catalytic medicine through nanozymes proposes promising combinations with photothermal therapy, photodynamic therapy, and magnetic fluid hyperthermia (MFH). Nanozyme activity centers around the hydroxyl radical ˙OH, the most toxic of the reactive oxygen species (ROS). With a synergistic approach in mind, we studied VxFe3−xO4 magnetic nanoparticles (MNPs) as agents for ROS production and heating. These MNPs were exhaustively characterised both morphologically and magnetically. A compositional analysis through electron microscopy and spectroscopy unveils a core–shell structure with a V-rich shell. A study of the power absorption of these MNPs fixed into a gel matrix, emulating cytosol viscosity, provides values of up to 1000 W g−1 for samples with 0.5 wt% MNPs, an AC magnetic field amplitude of 65 mT and a frequency of 350 kHz, typical in the MFH application. A concentration of the ˙OH-adduct of up to 2300 nM has been measured through electron spin resonance analysis as a result of peroxidase-like activity. Through the comparison with similarly-sized ferrite MNPs, we determined that V incorporation lowers the magnetic anisotropy and serves as an electron buffer, explaining the enhanced MFH and ROS-production results., T. E. T. acknowledges funding from the European Union's Horizon Europe Research and Innovation program under the Marie Sklodowska-Curie grant agreement no. 101068591. D. P. V. and J. M. N. thank CONICET-Argentina for their doctoral fellowships. The authors acknowledge funding from projects H2020-MSCA-RISE-2021 ULTIMATE-I project no. 101007825 and H2020-MSCA-RISE-2020 101007629-NESTOR and Basque Government grant no. IT-1005-16. G. F. G. acknowledges the Spanish MICIU PID2019-106947RB-C21/AEI/10.13039/501100011033. R. A. acknowledges the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033), the U. Zaragoza (14446-UZ2023-CIE-02) and the DGA project E13-23R.TEM and XPS studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA), U. Zaragoza, Spain., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient adsorption of phosphate on magnetic Fe3O4@MOF@LDH superstructures: Kinetics, thermodynamics, and mechanisms

  • Liu, Zhang
  • Han, Wei
  • Marquina, Clara
  • Kwan, Joseph Kai Cho
  • Ibarra, M. Ricardo
  • Yeung, King Lun
Phosphorus contamination in water systems poses a significant environmental threat, necessitating the need for effective phosphate removal methods. A novel magnetic composite, magnetic Fe3O4@MIL-100(Fe)@Mg-Al layered double hydroxide (LDH), synthesized through a solid-state transformation of MIL-100(Fe) from Fe3O4 followed by in-situ growth of Mg-Al LDH. This innovative hierarchical core/shell/shell structure leverages the magnetic properties of Fe3O4 for easy separation, utilizes MIL-100(Fe) to grow and orient the LDH, and exploits the large ion exchange capacity of Mg-Al LDH nanosheets for efficient phosphate capture. Our experiments demonstrated rapid phosphate removal exceeding 95 % within 10 min, achieving a final concentration of 25.5 μg/L from an initial concentration of 1 mg/L. The adsorption kinetics conformed to a pseudo-second order model, and isothermal data fit the Langmuir model. Thermodynamic analysis indicated spontaneous and exothermic adsorption, with an activation energy of 15.76 kJ mol−1. Enthalpy and entropy findings suggest a decrease in randomness during the adsorption process. Density Functional Theory (DFT) calculations revealed that phosphate ions interact strongly with Al sites in the LDH and Fe-O nodes in MIL-100(Fe). Phosphate recovery and sorbent regeneration are accomplished through a simple alkaline wash, which concentrates the recovered phosphate by 4.8 times. This study highlights the potential of Fe3O4@MIL-100(Fe)@Mg-Al LDH as a sustainable and efficient adsorbent for phosphate pollution mitigation, offering significant contributions to environmental protection and resource conservation., This work was supported by the Hong Kong Research Grants Council General Research Fund 16306322, Innovation and Technology Fund (ITS/300/18) of the Hong Kong Innovation and Technology Commission, GBA Institute of Collaborative Innovation (GICI-012), the Shenzhen Basic Research Program (JCYJ20150630094001158), the Guangzhou Collaborative Innovation Key Program (201704030074), the European Union-Hong Kong Research and Innovation Cooperation Co-funding Mechanism (E-HKUST601/17) from the Hong Kong Research Grants Council, and the Spanish Ministry of Science, Innovation and University (RTC-2017-6620-1 & PID2019-106947RB-C21). This work was supported in part by the project of Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone (HZQB-KCZYB-2020083). The authors also thank the HKUST ENVF-INA/LMA Joint Laboratory on Environment, the Environmental Central Facility, and the Materials Characterization and Preparation Facility (CWB) for material analysis and characterization., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Next generation of nanozymes: a perspective of the challenges to match biological performance

  • Goya, G. F.
  • Mayoral, A.
  • Winkler, E.
  • Zysler, R. D.
  • Bagnato, C.
  • Raineri, M.
  • Fuentes-García, J. A.
  • Lima, E.
Nanomaterials with enzyme-like activity have been the spotlight of scientific and technological efforts to substitute natural enzymes, not only in biological research but also for industrial manufacturing, medicine, and environment healing. Notable advancements in this field along the last years relied on to the rational design of single-atom active sites, knowledge of the underlying atomic structure, and realistic abinitio theoretical models of the electronic configuration at the active site. Thus, it is plausible that a next generation of nanozymes still to come will show even improved catalytic efficiency and substrate specificity. However, the dynamic nature of the protein cage surrounding most active sites in biological enzymes adds a flexible functionality that possess a challenge for nanozyme’s mimicking of their natural counterparts. We offer a perspective about where the main strategies to improve nanozymes are headed and identify some of the big challenges faced along the road to better performance. We also outline some of the most exciting bio-inspired ideas that could potentially change this field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of the distribution of anisotropy constants on the magnetic properties of iron oxide nanoparticles

  • Clarke, D.M.
  • Marquina, C.
  • Lloyd, D.C.
  • Vallejo-Fernandez, G.
The distribution of shape anisotropy constants in two colloids of iron oxide nanoparticles has been measured from the distribution of particle elongations within each system. The results are in good agreement with the values calculated from a temperature decay of remanence measurement. For a fluid with a saturation magnetisation of 420 emu/cc and an average particle elongation of ∼ 1.3, the distribution of energy barriers is controlled by both the distribution of particle sizes and particle elongations. For a fluid with a saturation magnetisation of 320 emu/cc and a wide distribution of particle sizes, the energy barrier to reversal can be assumed to be controlled by the distribution of particle volumes. These results highlight the need to take into account the distribution of anisotropy constants when making predictions of the heating properties of assemblies of magnetic nanoparticles for hyperthermia applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Role of anisotropy, frequency, and interactions in magnetic hyperthermia applications: noninteracting nanoparticles and linear chain arrangements

  • Valdés D.P.
  • Lima
  • E.
  • Jr.
  • Zysler R.D.
  • Goya G.F.
  • De Biasi E.
Efforts by numerous research groups have provided a deeper insight into the physical mechanisms behind the power absorption of single-domain magnetic nanoparticles in magnetic-fluid-hyperthermia applications and theoretical models now account for the main experimental observations. However, the role of all parameters relevant to the magnetic relaxation remains a matter of debate. Here, we employ a nonlinear model for the magnetic relaxation of single-domain magnetic nanoparticles with uniaxial effective anisotropy and evaluate the influence of particle-intrinsic parameters as well as experimental conditions on the power absorption of both noninteracting and interacting systems (linear arrangements). These effects are assessed through the enclosed hysteresis area of the magnetization loops as a function of relative anisotropy hK (the anisotropy field with respect to the amplitude of the ac field), i.e., the "area curve"of the system. These curves can be divided into four regions with distinct magnetic responses and boundaries that depend on the particle size, frequency of the applied field and interactions. Interactions change the effective anisotropy of the system and shift the area curve towards lower hK values. For the low relative anisotropy range, dipolar interactions increase the area of the hysteresis loops [thus, the specific power absorption (SPA)], while they are detrimental or produce nonsignificant effects for the range of high relative anisotropy. Our study resolves seemingly contradictory results of interaction effects in linear arrangements recently reported in the literature. Simulations of randomly oriented particles and chains were contrasted with the oriented cases. An analytical approach and the thermal interpretation of its validity range are discussed, both aimed at the design of nanoparticles and the choice of the experimental conditions for optimal heating. We find that systems with low-thermal-fluctuation influence are better candidates for the application due to their high SPA values. © 2021 American Physical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sonochemical route for mesoporous silica-coated magnetic nanoparticles towards pH-triggered drug delivery system

  • Fuentes-García J.A.
  • Alavarse A.C.
  • de Castro C.E.
  • Giacomelli F.C.
  • Ibarra M.R.
  • Bonvent J.-J.
  • Goya G.F.
This work reports a pH-triggered release system based on core@shell mesoporous magnetic nanoparticles (MNP@mSiO2) obtained using a simple and rapid ultrasound-assisted method. Performed characterization reveals magnetic cores of Fe2.9Mn0.1O4 (38 ± 6 nm) and specific loss power values adequate for hyperthermia (463 W/g), surrounded by a mesoporous silica shell (10 ± 2 nm) with large surface area (269 m2 g-1) functionalized with hydroxyl groups (-OH). MNP@mSiO2 were loaded with DOX and amino-silane grops, providing pH-triggered DOX release at acidic environments, driving by dipolar intermolecular interactions. The experimental DOX release kinetics at pH 5.5, 6.6 and 7.4 were determined and adjusted to Gompertz dissolution model (Nash–Sutcliffe efficiency coefficient (NSE>0.9)), where the only strongly pH-dependent variable is the percentage of DOX released. The pH-triggered response observed in the system was ~20% of the DOX loaded into the MNP@mSiO2 is released at pH 6.6 or 7.4, whereas up to 80 wt% is released at pH 5.5. Time to 50% of release and dissociation rate of the system remaining constant, suggesting no-pH influence on these parameters. The biological assays highlight negligible hemolytic effect and cytocompatibility of the hybrid material, pointing out the potential use of MNP@mSiO2 as a magnetic driven drug delivery system with pH-triggered drug release kinetics at acidic environments. These results probe the feasibility of sonochemical methods in the elaboration of biocompatible and controlled properties nanomaterials for drug release applications, with the advantage of accurately responses predictions by mathematical model and using minimal processing steps or laboratory equipment. © 2021 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Publisher’s Note: “Next generation of nanozymes: A perspective of the challenges to match biological performance” [J. Appl. Phys. 130, 190903 (2021)]

  • Goya, G. F.
  • Mayoral, A.
  • Winkler, E.
  • Zysler, R. D.
  • Bagnato, C.
  • Raineri, M.
  • Fuentes García, J. A.
  • Lima, E.
Nanomaterials with enzyme-like activity have been the spotlight of scientific and technological efforts to substitute natural enzymes, not only in biological research but also for industrial manufacturing, medicine, and environment healing. Notable advancements in this field along the last years relied on to the rational design of single-atom active sites, knowledge of the underlying atomic structure, and realistic ab initio theoretical models of the electronic configuration at the active site. Thus, it is plausible that a next generation of nanozymes still to come will show even improved catalytic efficiency and substrate specificity. However, the dynamic nature of the protein cage surrounding most active sites in biological enzymes adds a flexible functionality that possess a challenge for nanozyme's mimicking of their natural counterparts. We offer a perspective about where the main strategies to improve nanozymes are headed and identify some of the big challenges faced along the road to better performance. We also outline some of the most exciting bio-inspired ideas that could potentially change this field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Graphene-encapsulated magnetic nanoparticles for safe and steady delivery of ferulic acid in diabetic mice

  • Zhong, Baihua
  • Mateu-Roldán, Adán
  • Fanarraga, Mónica L.
  • Han, Wei
  • Muñoz-Guerra, Débora
  • González, Jesús
  • Tao Weng, Lu
  • Ibarra, M. Ricardo
  • Marquina, Clara
  • Lun Yeung, King
Iron nanoparticles encapsulated within graphene shells (Fe@C) were examined for cellular internalization, subcellular behavior, biocompatibility, and influence on cell viability and proliferation. Studies on human lung (adenocarcinoma human alveolar basal epithelial) and skin (epidermoid carcinoma) cells indicate Fe@C is less toxic and more biocompatible than the magnetite nanoparticles coated by an amorphous carbon (Fe3O4@C). Fe3O4@C exhibited more signs of degradation than Fe@C when exposed to murine macrophages (mouse monocyte-macrophages J774). Unlike Fe3O4@C, Fe@C has a high drug loading capacity (0.18 g/g) for ferulic acid, an active pharmaceutical ingredient found in the traditional Chinese herb Angelica sinensis and releases the drug at a constant dosing rate of 8.75 mg/g/day over 30 days. Ferulic acid released by Fe@C injected subcutaneously in diabetic BALB/c mice is effective in lowering the blood glucose level.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Magnetic nanofibers for remotely triggered catalytic activity applied to the degradation of organic pollutants

  • Fuentes-García, J.A.
  • Sanz, B.
  • Mallada, R.
  • Ibarra, M.R.
  • Goya, G.F.
This work reports on the fabrication and characterization of a novel type of electrospun magnetic nanofibers (MNFs), and their application as a magnetically-activable catalysts for degradation of organic pollutants. The magnetic stimulation capability for the catalytic action is provided by iron-manganese oxide (MnxFe2-xO4) magnetic nanoparticles (MNPs) embedded into electrospun polyacrylonitrile (PAN), which provides stability and chemical resistance. The MNPs (average size d = 40 ± 7 nm) were first obtained by a green and fast sonochemical route, and subsequently embedded into electrospun PAN nanofibers. The final MNFs showed an average diameter of 760 ± 150 nm, providing a superhydrophobic surface with contact angle (θc = 165°), as well as a considerable amount ( 50 % wt.) of embedded MNPs (Mn0.5Fe2.5O4), thermally stable up to temperatures of 330 °C. The catalytic Fe2+/3+/Mn2+/3+/4+ active centers on the MNPs of MNF’s surface could be remotely activated by alternating magnetic fields (AMF) to degrade the methyl blue (MB). Remarkable stability of the MNFs during heating under extreme pH conditions (3 < pH < 10) was observed along several catalytic cycles. The degradation kinetics in presence of hydrogen peroxide showed followed the Langmuir–Hinshelwood model with an average efficiency > 80 %, after several cycles of reusing the same sample without any regeneration process. The capacity of these materials as a catalytic material with magnetic remote activation makes them appealing for those catalytic applications under conditions of darkness or restrained access, where photocatalytic reaction cannot be achieved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Gel transformation as a general strategy for fabrication of highly porous multiscale MOF architectures

  • Liu, Zhang
  • López Navas, Javier
  • Han, Wei
  • Ibarra, Manuel Ricardo
  • Cho Kwan, Joseph Kai
  • Yeung, King Lun
The structure and chemistry of metal–organic frameworks or MOFs dictate their properties and functionalities. However, their architecture and form are essential for facilitating the transport of molecules, the flow of electrons, the conduction of heat, the transmission of light, and the propagation of force, which are vital in many applications. This work explores the transformation of inorganic gels into MOFs as a general strategy to construct complex porous MOF architectures at nano, micro, and millimeter length scales. MOFs can be induced to form along three different pathways governed by gel dissolution, MOF nucleation, and crystallization kinetics. Slow gel dissolution, rapid nucleation, and moderate crystal growth result in a pseudomorphic transformation (pathway 1) that preserves the original network structure and pores, while a comparably faster crystallization displays significant localized structural changes but still preserves network interconnectivity (pathway 2). MOF exfoliates from the gel surface during rapid dissolution, thus inducing nucleation in the pore liquid leading to a dense assembly of percolated MOF particles (pathway 3). Thus, the prepared MOF 3D objects and architectures can be fabricated with superb mechanical strength (>98.7 MPa), excellent permeability (>3.4 × 10−10 m2), and large surface area (1100 m2 g−1) and mesopore volumes (1.1 cm3 g−1).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Observation of magnetic vortex configuration in non-stoichiometric Fe3O4 nanospheres

  • Niraula, Gopal
  • Toneto, Denilson
  • Goya, Gerardo F.
  • Zoppellaro, Giorgio
  • Coaquira, Jose A. H.
  • Muraca, Diego
  • Denardin, Juliano C.
  • Almeida, Trevor P.
  • Knobel, Marcelo
  • Ayesh, Ahmad I.
  • Sharma, Surender K.
Theoretical and micromagnetic simulation studies of magnetic nanospheres with vortex configurations suggest that such nanostructured materials have technological advantages over conventional nanosystems for applications based on high-power-rate absorption and subsequent emission. However, full experimental evidence of magnetic vortex configurations in spheres of submicrometer size is still lacking. Here, we report the microwave irradiation fabrication of Fe3O4 nanospheres and establish their magnetic vortex configuration based on experimental results, theoretical analysis, and micromagnetic simulations. Detailed magnetic and electrical measurements, together with Mössbauer spectroscopy data, provide evidence of a loss of stoichiometry in vortex nanospheres owing to the presence of a surface oxide layer, defects, and a higher concentration of cation vacancies. The results indicate that the magnetic vortex spin configuration can be established in bulk spherical magnetite materials. This study provides crucial information that can aid the synthesis of magnetic nanospheres with magnetically tailored properties; consequently, they may be promising candidates for future technological applications based on three-dimensional magnetic vortex structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Disruption of the mitochondrial network in a mouse model of Huntington's disease visualized by in-tissue multiscale 3D electron microscopy

  • Martin-Solana, Eva
  • Casado-Zueras, Laura
  • Torres, Teobaldo E.
  • Goya, Gerardo F.
  • Fernandez-Fernandez, Maria-Rosario
  • Fernandez, Jose-Jesus
Huntington’s disease (HD) is an inherited neurodegenerative disorder caused by an expanded CAG repeat in the coding sequence of huntingtin protein. Initially, it predominantly affects medium-sized spiny neurons (MSSNs) of the corpus striatum. No effective treatment is still available, thus urging the identification of potential therapeutic targets. While evidence of mitochondrial structural alterations in HD exists, previous studies mainly employed 2D approaches and were performed outside the strictly native brain context. In this study, we adopted a novel multiscale approach to conduct a comprehensive 3D in situ structural analysis of mitochondrial disturbances in a mouse model of HD. We investigated MSSNs within brain tissue under optimal structural conditions utilizing state-of-the-art 3D imaging technologies, specifically FIB/SEM for the complete imaging of neuronal somas and Electron Tomography for detailed morphological examination, and image processing-based quantitative analysis. Our findings suggest a disruption of the mitochondrial network towards fragmentation in HD. The network of interlaced, slim and long mitochondria observed in healthy conditions transforms into isolated, swollen and short entities, with internal cristae disorganization, cavities and abnormally large matrix granules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Insight into the molecular mechanism of organic pollutants’ adsorption on magnetic ZIF-8 synthesized via a transformational route

  • Liu, Zhang
  • Marquina, C.
  • Han, Wei
  • Kwan, Joseph K.C.
  • Ibarra, M. Ricardo
  • Yeung, King Lun
This study presents the synthesis of Fe3O4@Zeolite Imidazolate Framework-8 (Fe3O4@ZIF-8), a novel magnetic core–shell adsorbent engineered for enhance adsorption of organic pollutants. The process begins with the formation of spherical magnetite aggregates (i.e., Fe3O4) via a solvothermal method, using polyacrylic acid for stabilization and capping. A ZIF-8 shell is then grown through a sol gel process followed by reaction with 2-methylimidazole, resulting in a crystalline shell approximately 60 nm thick. Characterization techniques, including energy dispersive X-ray analysis and X-ray diffraction, confirm the successful preparation of Fe3O4@ZIF-8. The adsorption capabilities were evaluated using methylene blue (MB) and diclofenac sodium (DCF) as model pollutants. Fe3O4@ZIF-8 demonstrated rapid removal efficiencies, with 98 % removal of MB (6.01 × 10-4 mg·g−1·min−1) and DCF (4.43 × 10-4 g·mg−1.min−1) within 15 and 30 min, respectively, significantly outperforming conventional activated carbon. Thermodynamic studies indicate that the adsorption processes are spontaneous; enthalpic changes drive MB adsorption, while DCF is influenced by entropic factors. Molecular modeling reveals preferential adsorption behaviors on different ZIF-8 facets, with stronger interactions for MB due to π-π stacking and hydrogen bonding. These findings underscore the potential of Fe3O4@ZIF-8 as an effective adsorbent for water purification, highlighting its substantial adsorption capacity (73.2 mg·g−1 for MB and 53.8 mg·g−1 for DCF), stability, and reusability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Vanadium incorporation in ferrite nanoparticles serves as an electron buffer and anisotropy tuner in catalytic and hyperthermia applications

  • Torres, T. E.
  • Valdés, D. P.
  • Hettler, S.
  • Nuñez, J. M.
  • Rodrigo, I.
  • Orue, I.
  • García, J. Á.
  • Plazaola, F.
  • Zysler, R. D.
  • Lima, E.
  • Aguirre, M. H.
  • Goya, G. F.
  • Arenal, R.
Cancer research has gradually shifted its focus from individual therapies to a combination of them for enhanced treatment effectiveness. In particular, the increased interest in the field of catalytic medicine through nanozymes proposes promising combinations with photothermal therapy, photodynamic therapy, and magnetic fluid hyperthermia (MFH). Nanozyme activity centers around the hydroxyl radical ˙OH, the most toxic of the reactive oxygen species (ROS). With a synergistic approach in mind, we studied VxFe3−xO4 magnetic nanoparticles (MNPs) as agents for ROS production and heating. These MNPs were exhaustively characterised both morphologically and magnetically. A compositional analysis through electron microscopy and spectroscopy unveils a core–shell structure with a V-rich shell. A study of the power absorption of these MNPs fixed into a gel matrix, emulating cytosol viscosity, provides values of up to 1000 W g−1 for samples with 0.5 wt% MNPs, an AC magnetic field amplitude of 65 mT and a frequency of 350 kHz, typical in the MFH application. A concentration of the ˙OH-adduct of up to 2300 nM has been measured through electron spin resonance analysis as a result of peroxidase-like activity. Through the comparison with similarly-sized ferrite MNPs, we determined that V incorporation lowers the magnetic anisotropy and serves as an electron buffer, explaining the enhanced MFH and ROS-production results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Efficient adsorption of phosphate on magnetic Fe3O4@MOF@LDH superstructures: Kinetics, thermodynamics, and mechanisms

  • Liu, Zhang
  • Han, Wei
  • Marquina, C.
  • Kwan, Joseph K.C.
  • Ibarra, Manuel Ricardo
  • Yeung, King Lun
Phosphorus contamination in water systems poses a significant environmental threat, necessitating the need for effective phosphate removal methods. A novel magnetic composite, magnetic Fe3O4@MIL-100(Fe)@Mg-Al layered double hydroxide (LDH), synthesized through a solid-state transformation of MIL-100(Fe) from Fe3O4 followed by in-situ growth of Mg-Al LDH. This innovative hierarchical core/shell/shell structure leverages the magnetic properties of Fe3O4 for easy separation, utilizes MIL-100(Fe) to grow and orient the LDH, and exploits the large ion exchange capacity of Mg-Al LDH nanosheets for efficient phosphate capture. Our experiments demonstrated rapid phosphate removal exceeding 95 % within 10 min, achieving a final concentration of 25.5 μg/L from an initial concentration of 1 mg/L. The adsorption kinetics conformed to a pseudo-second order model, and isothermal data fit the Langmuir model. Thermodynamic analysis indicated spontaneous and exothermic adsorption, with an activation energy of 15.76 kJ mol−1. Enthalpy and entropy findings suggest a decrease in randomness during the adsorption process. Density Functional Theory (DFT) calculations revealed that phosphate ions interact strongly with Al sites in the LDH and Fe-O nodes in MIL-100(Fe). Phosphate recovery and sorbent regeneration are accomplished through a simple alkaline wash, which concentrates the recovered phosphate by 4.8 times. This study highlights the potential of Fe3O4@MIL-100(Fe)@Mg-Al LDH as a sustainable and efficient adsorbent for phosphate pollution mitigation, offering significant contributions to environmental protection and resource conservation