Skip to main content

IDENTIFICACION DE ALTERACIONES EN LA ARQUITECTURA SUBCELULAR DE TEJIDOS PERIFERICOS EN LA ENFERMEDAD DE HUNTINGTON

SAF2017-84565-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PolishEM: image enhancement in FIB-SEM

  • Fernández, José Jesús
  • Torres, Teobaldo E.
  • Martin-Solana, Eva
  • Goya, Gerardo F.
  • Fernández-Fernández, María Rosario
[Summary]: We have developed a software tool to improve the image quality in focused ion beam–scanning electron microscopy (FIB–SEM) stacks: PolishEM. Based on a Gaussian blur model, it automatically estimates and compensates for the blur affecting each individual image. It also includes correction for artifacts commonly arising in FIB–SEM (e.g. curtaining). PolishEM has been optimized for an efficient processing of huge FIB–SEM stacks on standard computers., [Availability and implementation]: PolishEM has been developed in C. GPL source code and binaries for Linux, OSX and Windows are available at PolishEM has been developed in C. GPL source code and binaries for Linux, OSX and Windowsareavailable at http://www.cnb.csic.es/%7ejjfernandez/polishem., This work was supported by the AEI/FEDER, UE [Grant SAF2017-84565-R] and Fundación R. Areces., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Consideration of sample motion in cryo-tomography based on alignment residual interpolation

  • Fernández, José Jesús
  • Li, Sam
  • Agard, David A.
Recently, it has been shown that the resolution in cryo-tomography could be improved by considering the sample motion in tilt-series alignment and reconstruction, where a set of quadratic polynomials were used to model this motion. One requirement of this polynomial method is the optimization of a large number of parameters, which may limit its practical applicability. In this work, we propose an alternative method for modeling the sample motion. Starting from the standard fiducial-based tilt-series alignment, the method uses the alignment residual as local estimates of the sample motion at the 3D fiducial positions. Then, a scattered data interpolation technique characterized by its smoothness and a closed-form solution is applied to model the sample motion. The motion model is then integrated in the tomographic reconstruction. The new method improves the tomogram quality similar to the polynomial one, with the important advantage that the determination of the motion model is greatly simplified, thereby overcoming one of the major limitations of the polynomial model. Therefore, the new method is expected to make the beam-induced motion correction methodology more accessible to the cryoET community., Work partially funded by the National Institutes of Health (NIH P01 GM105537), by the Spanish AEI/FEDER, UE (SAF2017-84565-R) and by Fundacion Ramon Areces.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electron cryo-tomography provides insight into procentriole architecture and assembly mechanism

  • Li, Sam
  • Fernández, José Jesús
  • Marshall, Wallace F.
  • Agard, David A.
© Li et al., Centriole is an essential structure with multiple functions in cellular processes. Centriole biogenesis and homeostasis is tightly regulated. Using electron cryo-tomography (cryoET) we present the structure of procentrioles from Chlamydomonas reinhardtii. We identified a set of non-tubulin components attached to the triplet microtubule (MT), many are at the junctions of tubules likely to reinforce the triplet. We describe structure of the A-C linker that bridges neighboring triplets. The structure infers that POC1 is likely an integral component of A-C linker. Its conserved WD40 β-propeller domain provides attachment sites for other A-C linker components. The twist of A-C linker results in an iris diaphragm-like motion of the triplets in the longitudinal direction of procentriole. Finally, we identified two assembly intermediates at the growing ends of procentriole allowing us to propose a model for the procentriole assembly. Our results provide a comprehensive structural framework for understanding the molecular mechanisms underpinning procentriole biogenesis and assembly., This work is supported in part by NIH grants GM031627 (DAA), GM118099 (DAA), PO1 GM105537 (DAA), GM113602 (WFM) and by HHMI (DAA) and by the Spanish AEI/FEDER (SAF2017-84565-R) (J-JF) and by Fundacion Ramon Areces (J-JF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

TomoAlign: A novel approach to correcting sample motion and 3D CTF in CryoET

  • Fernández, José Jesús
  • Li, Sam
TomoAlign is a software package that integrates tools to mitigate two important resolution limiting factors in cryoET, namely the beam-induced sample motion and the contrast transfer function (CTF) of the microscope. The package is especially focused on cryoET of thick specimens where fiducial markers are required for accurate tilt-series alignment and sample motion estimation. TomoAlign models the beam-induced sample motion undergone during the tilt-series acquisition. The motion models are used to produce motion-corrected subtilt-series centered on the particles of interest. In addition, the defocus of each particle at each tilt image is determined and can be corrected, resulting in motion-corrected and CTF-corrected subtilt-series from which the subtomograms can be computed. Alternatively, the CTF information can be passed on so that CTF correction can be carried out entirely within external packages like Relion. TomoAlign serves as a versatile tool that can streamline the cryoET workflow from initial alignment of tilt-series to final subtomogram averaging during in situ structure determination., Work partially funded by the National Institutes of Health (R35GM118099 to D.A.A. and R01GM127571 to M.W.), and the Spanish AEI/FEDER, UE (SAF2017-84565-R to J.J.F.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Architecture of torovirus replicative organelles

  • Ávila-Pérez, Ginés
  • Rejas, M. Teresa
  • Chichón, Francisco Javier
  • Guerra, Milagros
  • Fernández, José Jesús
  • Rodríguez, Dolores
Plus-stranded RNA viruses replicate in the cytosol of infected cells, in membrane-bound replication complexes. We previously identified double membrane vesicles (DMVs) in the cytoplasm of cells infected with Berne virus (BEV), the prototype member of the Torovirus genus (Nidovirales Order). Our previous analysis by transmission electron microscopy suggested that the DMVs form a reticulovesicular network (RVN) analogous those described for the related severe acute respiratory syndrome coronavirus (SARS-CoV-1). Here, we used serial sectioning and electron tomography to characterize the architecture of torovirus replication organelles, and to learn about their biogenesis and dynamics during the infection. The formation of a RVN in BEV infected cells was confirmed, where the outer membranes of the DMVs are interconnected with each other and with the ER. Paired or zippered ER membranes connected with the DMVs were also observed, and likely represent early structures that evolve to give rise to DMVs. Also, paired membranes forming small spherule-like invaginations were observed at late time post-infection. Although resembling in size, the tomographic analysis show that these structures are clearly different from the true spherules described previously for coronaviruses. Hence, BEV shows important similarities, but also some differences, in the architecture of the replication organelles with other nidoviruses., This work was supported by grants AGL2017-87464-C2-1-P to DR and SAF2017-84565-R to JJF funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by the European Union. GAP was supported by a FPU fellowship from the Spanish Ministry of Education, Culture and Sport. We acknowledge access to the cryoEM CNB-CSIC facility in the context of the CRIOMECORR project (ESFRI-2019-01-CSIC-16)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electron cryo-tomography structure of axonemal doublet microtubule from Tetrahymena thermophila

  • Li, Sam
  • Fernández, José Jesús
  • Fabritius, Amy S.
  • Agard, David A.
  • Winey, Mark
Doublet microtubules (DMTs) provide a scaffold for axoneme assembly in motile cilia. Aside from α/β tubulins, the DMT comprises a large number of non-tubulin proteins in the luminal wall of DMTs, collectively named the microtubule inner proteins (MIPs). We used cryoET to study axoneme DMT isolated from Tetrahymena. We present the structures of DMT at nanometer and sub-nanometer resolution. The structures confirm that MIP RIB72A/B binds to the luminal wall of DMT by multiple DM10 domains. We found FAP115, an MIP-containing multiple EF-hand domains, located at the interface of four-tubulin dimers in the lumen of A-tubule. It contacts both lateral and longitudinal tubulin interfaces and playing a critical role in DMT stability. We observed substantial structure heterogeneity in DMT in an FAP115 knockout strain, showing extensive structural defects beyond the FAP115-binding site. The defects propagate along the axoneme. Finally, by comparing DMT structures from Tetrahymena and Chlamydomonas, we have identified a number of conserved MIPs as well as MIPs that are unique to each organism. This conservation and diversity of the DMT structures might be linked to their specific functions. Our work provides structural insights essential for understanding the roles of MIPs during motile cilium assembly and function, as well as their relationships to human ciliopathies., This work is supported in part by National Institutes of Health (NIH) grants R01GM127571 (M Winey), R35GM118099 (DA Agard), and by the Spanish AEI/FEDER (SAF2017-84565-R) (J-J Fernandez)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical flow driven interpolation for isotropic FIB-SEM reconstructions

  • González-Ruiz, Vicente
  • García-Ortiz, Juan Pablo
  • Fernández-Fernández, María Rosario
  • Fernández, José Jesús
[Background and Objective]: Focused Ion Beam - Scanning Electron Microscopy (FIB-SEM) allows three-dimensional ultrastructural analysis of cells and tissues at the nanoscale. The technique iteratively removes a section of the sample with a FIB and takes an SEM image from the exposed surface. The section thickness is usually higher than the image pixel size to reduce acquisition time, thus resulting in anisotropic resolution. In this work, we explore novel interpolation methods along the sectioning direction to produce isotropic resolution and facilitate proper interpretation of the FIB-SEM 3D volumes., [Methods]: Classical interpolation methods are usually applied in this context under the assumption that the changes through successive images are relatively smooth. However, the actual 3D arrangement of the structures in the sample may cause significant changes in the biological features between consecutive images of the FIB-SEM stacks. We have developed a novel interpolation strategy that accounts for this variation by using the Optical Flow (OF) to estimate it. As an intermediate stage, OF-compensated images are produced by aligning the spatial regions of the biological structures. Interpolated images are then generated from these OF-compensated images. The final isotropic stack is assembled by interleaving the interpolated images with the original images of the anisotropic stack., [Results]: OF-driven and classical interpolation methods were compared using an objective assessment based on Pearson Correlation Coefficient (PCC) and a qualitative evaluation based on visual results, using public datasets and representative anisotropy conditions. The objective assessment demonstrated that the OF-driven interpolation always yields higher PCC values, with interpolated images closer to the ground truth. The qualitative evaluation corroborated those results and confirmed that classical interpolation may blur areas with substantial changes between consecutive images whereas OF-driven interpolation provides sharpness., [Conclusions]: We have developed an OF-driven interpolation approach to generating FIB-SEM stacks with isotropic resolution from experimental anisotropic data. It adapts to the rapid variation of the biological structures observed through the images of the FIB-SEM stack. Our approach outperforms classical interpolation and manages to produce sharp interpolated views in cases where there are significant changes between consecutive experimental images., This work has been partially supported by the Spanish Ministry of Science and Innovation/AEI (grants SAF2017-84565-R, RTI2018-095993-B-I00, PID2021-123278OB-I00, PID2021-123424OB-I00, TED2021-132020B-I00), by the Spanish National Research Council (CSIC, grant 2020AEP029), by the European initiative Corbel (project id 2301), by the Junta de Andalucía (grants UAL18-TIC-A020020-B and P18-RT-1193) and by FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

HPC enables efficient 3D membrane segmentation in electron tomography

  • Moreno, J. J.
  • Garzón, E. M.
  • Fernández, José Jesús
  • Martínez-Sánchez, Antonio
Electron Tomography (ET) is a powerful three-dimensional (3D) imaging technique used in structural biology and biomedicine to allow the visualization of the interior of cells at close-to-molecular resolution. Interpretation of the 3D volumes in ET is usually challenging due to the complexity of the cellular environment, noise conditions and other factors. Automated segmentation methods focused on membranes of the cells and organelles greatly facilitate visualization and interpretation of the 3D volumes. However, they are typically computationally expensive and spend significant processing time on standard computers. In this work, we introduce efficient implementations of one of the methods most commonly used in the ET field for membrane segmentation. They were developed by using High Performance Computing (HPC) techniques to make the most of modern CPU-based and GPU-based computing platforms. A thorough evaluation of the performance on state-of-the-art machines was carried out. The HPC implementations succeed in achieving remarkable speedups, which are around 100× on GPUs, and making it possible to process large 3D volumes in the order of seconds or a few minutes., This work has been supported by the projects and contracts: RTI2018-095993-B-I00, SAF2017-84565-R, PID2021-123278OB, PID2021-123424OB, TED2021-132020B (funded by MCIN/AEI/10.13039/501100011033/FEDER “A way to make Europe”); UAL18-TIC-A020020-B and P18-RT-1193 (both funded by Junta de Andalucía and FEDER); PAPI-21-GR-2011-0048 (funded by the University of Oviedo) and FUO-200-21 (funded by Thermo Fisher Scientific); and a FPU fellowship (FPU16/05946 funded by MCIN/AEI/10.13039/501100011033/ “El FSE invierte en tu futuro”) awarded to J.J. Moreno., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure-preserving Gaussian denoising of FIB-SEM volumes

  • González-Ruiz, Vicente
  • Fernández-Fernández, María Rosario
  • Fernández, José Jesús
FIB-SEM (Focused Ion Beam-Scanning Electron Microscopy) is an imaging technique that allows 3D ultrastructural analysis of cells and tissues at the nanoscale. The acquired FIB-SEM data are highly noisy, which makes denoising an essential step prior to volume interpretation. Gaussian filtering is a standard method in the field because it is fast and straightforward. However, it tends to blur the biological features due to its linear nature that ignores the rapid changes of the structures throughout the volume. To address this issue, we have developed a new approach to structure-preserving noise reduction for FIB-SEM. It has abilities to locally adapt the filtering to the biological structures while taking advantage of the simplicity of Gaussian filtering. It uses the Optical Flow (OF) to estimate the variations of the structural features across the volume, so that they are compensated before the subsequent filtering with a Gaussian function. As demonstrated qualitatively and objectively with datasets from different samples and acquired under different conditions, our denoising approach outperforms the standard Gaussian filtering and is competitive with state-of-the-art methods in terms of noise reduction and preservation of the sharpness of the structures., This work has been partially supported by the Spanish Ministry of Science and Innovation/AEI (grants SAF2017-84565-R, RTI2018-095993-B-I00, PID2021-123278OB-I00, TED2021-132020B-I00), by the Spanish National Research Council (CSIC, grant 2020AEP029), by the Junta de Andalucía, Spain (grants UAL18-TIC-A020020-B and P18-RT-1193) and by FEDER, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

TomoEED: fast edge-enhancing denoising of tomographic volumes

  • Moreno, J. J.
  • Martínez-Sánchez, Antonio
  • Martínez, J. A.
  • Garzón, E. M.
  • Fernández, José Jesús
TomoEED is an optimized software tool for fast feature-preserving noise filtering of large 3D tomographic volumes on CPUs and GPUs. The tool is based on the anisotropic nonlinear diffusion method. It has been developed with special emphasis in the reduction of the computational demands by using different strategies, from the algorithmic to the high performance computing perspectives. TomoEED manages to filter large volumes in a matter of minutes in standard computers., Grants TIN2015-66680 and SAF2017-84565-R (AEI/FEDER, UE) and Fundación Ramón Areces., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Progressive alterations in polysomal architecture and activation of ribosome stalling relief factors in a mouse model of Huntington's disease

  • Martin-Solana, Eva
  • Diaz-Lopez, Irene
  • Mohamedi, Yamina
  • Ventoso, Ivan
  • Fernández, José Jesús
  • Fernández-Fernández, María Rosario
Given their highly polarized morphology and functional singularity, neurons require precise spatial and temporal control of protein synthesis. Alterations in protein translation have been implicated in the development and progression of a wide range of neurological and neurodegenerative disorders, including Huntington's disease (HD). In this study we examined the architecture of polysomes in their native brain context in striatal tissue from the zQ175 knock-in mouse model of HD. We performed 3D electron tomography of high-pressure frozen and freeze-substituted striatal tissue from HD models and corresponding controls at different ages. Electron tomography results revealed progressive remodelling towards a more compacted polysomal architecture in the mouse model, an effect that coincided with the emergence and progression of HD related symptoms. The aberrant polysomal architecture is compatible with ribosome stalling phenomena. In fact, we also detected in the zQ175 model an increase in the striatal expression of the stalling relief factor EIF5A2 and an increase in the accumulation of eIF5A1, eIF5A2 and hypusinated eIF5A1, the active form of eIF5A1. Polysomal sedimentation gradients showed differences in the relative accumulation of 40S ribosomal subunits and in polysomal distribution in striatal samples of the zQ175 model. These findings indicate that changes in the architecture of the protein synthesis machinery may underlie translational alterations associated with HD, opening new avenues for understanding the progression of the disease., This work was mainly supported by a grant from Fundación Ramón Areces (CIVP18A3892). The Spanish AEI (SAF2017-84565-R, TED2021-132020B-I00, PID2022-139071NB-I00) and the Huntington's disease Society of America (HDSA) (Human Biology project 2022 awarded to MRFF) provided additional funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Disruption of the mitochondrial network in a mouse model of Huntington's disease visualized by in-tissue multiscale 3D electron microscopy

  • Martin-Solana, Eva
  • Casado, Laura
  • Torres, Teobaldo E.
  • Goya, Gerardo F.
  • Fernández-Fernández, María Rosario
  • Fernández, José Jesús
Trabajo presentado a: Instruct Biennial Structural Biology Conference Cascais, Lisbon, Portugal 23 – 24th May 2024., Huntington’s disease (HD) is an inherited neurodegenerative disorder caused by an expanded CAG repeat in the coding sequence of huntingtin protein. Initially, it predominantly affects medium-sized spiny neurons (MSSNs) of the corpus striatum. No effective treatment is still available, thus urging the identification of potential therapeutic targets. While evidence of mitochondrial structural alterations in HD exists, previous studies mainly employed 2D approaches and were performed outside the strictly native brain context. In this study, we adopted a novel multiscale approach to conduct a comprehensive 3D in situ structural analysis of mitochondrial disturbances in a mouse model of HD. We investigated MSSNs within brain tissue under optimal structural conditions utilizing state-of-the-art 3D imaging technologies, specifically FIB/SEM for the complete imaging of neuronal somas and Electron Tomography for detailed morphological examination, and image processing-based quantitative analysis. Our findings suggest a disruption of the mitochondrial network towards fragmentation in HD. The network of interlaced, slim and long mitochondria observed in healthy conditions transforms into isolated, swollen and short entities, with internal cristae disorganization, cavities and abnormally large matrix granules., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., This work was supported through grant A-4206 from Cure Huntington's Disease Initiative (CHDI) Foundation, grant CIVP18A3892 from Fundación Ramón Areces, MSCA-RISE project #101007629 and through grants SAF2017-84565-R, PID2019-106947RBC21, TED2021-132020B-I00, PDC2021-121409-I00 and PID2022-139071NB-I00, funded by MCIN/AEI/10.13039/501100011033, by the European Union through “ERDF A way of making Europe” and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cryo-tomography tilt-series alignment with consideration of the beam-induced sample motion

  • Fernández, José Jesús
  • Li, Sam
  • Bharat, Tanmay A.M.
  • Agard, David A.
Recent evidence suggests that the beam-induced motion of the sample during tilt-series acquisition is a major resolution-limiting factor in electron cryo-tomography (cryoET). It causes suboptimal tilt-series alignment and thus deterioration of the reconstruction quality. Here we present a novel approach to tilt-series alignment and tomographic reconstruction that considers the beam-induced sample motion through the tilt-series. It extends the standard fiducial-based alignment approach in cryoET by introducing quadratic polynomials to model the sample motion. The model can be used during reconstruction to yield a motion-compensated tomogram. We evaluated our method on various datasets with different sample sizes. The results demonstrate that our method could be a useful tool to improve the quality of tomograms and the resolution in cryoET., This work has been partially funded by the National Institutes of Health (NIH P01 GM105537), by the Spanish AEI/FEDER, UE (SAF2017-84565-R) and by Fundacion Ramon Areces., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Disruption of the mitochondrial network in a mouse model of Huntington's disease visualized by in-tissue multiscale 3D electron microscopy

  • Martin-Solana, Eva
  • Casado-Zueras, Laura
  • Torres, Teobaldo E.
  • Goya, Gerardo F.
  • Fernandez-Fernandez, Maria-Rosario
  • Fernandez, Jose-Jesus
Huntington’s disease (HD) is an inherited neurodegenerative disorder caused by an expanded CAG repeat in the coding sequence of huntingtin protein. Initially, it predominantly affects medium-sized spiny neurons (MSSNs) of the corpus striatum. No effective treatment is still available, thus urging the identification of potential therapeutic targets. While evidence of mitochondrial structural alterations in HD exists, previous studies mainly employed 2D approaches and were performed outside the strictly native brain context. In this study, we adopted a novel multiscale approach to conduct a comprehensive 3D in situ structural analysis of mitochondrial disturbances in a mouse model of HD. We investigated MSSNs within brain tissue under optimal structural conditions utilizing state-of-the-art 3D imaging technologies, specifically FIB/SEM for the complete imaging of neuronal somas and Electron Tomography for detailed morphological examination, and image processing-based quantitative analysis. Our findings suggest a disruption of the mitochondrial network towards fragmentation in HD. The network of interlaced, slim and long mitochondria observed in healthy conditions transforms into isolated, swollen and short entities, with internal cristae disorganization, cavities and abnormally large matrix granules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

PolishEM: image enhancement in FIB-SEM

  • Fernandez, J.J.
  • Torres, T.E.
  • Martin-Solana, E.
  • Goya, G.F.
  • Fernandez-Fernandez, M.R.
We have developed a software tool to improve the image quality in focused ion beam-scanning electron microscopy (FIB-SEM) stacks: PolishEM. Based on a Gaussian blur model, it automatically estimates and compensates for the blur affecting each individual image. It also includes correction for artifacts commonly arising in FIB-SEM (e.g. curtaining). PolishEM has been optimized for an efficient processing of huge FIB-SEM stacks on standard computers.