Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Profiling of Sub-Lethal in Vitro Effects of Multi-Walled Carbon Nanotubes Reveals Changes in Chemokines and Chemokine Receptors

  • Keshavan, Sandeep
  • Torres Andón, Fernando
  • Gallud, Audrey
  • Chen, Wei
  • Reinert, Knut
  • Tran, Lang
  • Fadeel, Bengt
Engineered nanomaterials are potentially very useful for a variety of applications, but studies are needed to ascertain whether these materials pose a risk to human health. Here, we studied three benchmark nanomaterials (Ag nanoparticles, TiO2 nanoparticles, and multi-walled carbon nanotubes, MWCNTs) procured from the nanomaterial repository at the Joint Research Centre of the European Commission. Having established a sub-lethal concentration of these materials using two human cell lines representative of the immune system and the lungs, respectively, we performed RNA sequencing of the macrophage-like cell line after exposure for 6, 12, and 24 h. Downstream analysis of the transcriptomics data revealed significant effects on chemokine signaling pathways. CCR2 was identified as the most significantly upregulated gene in MWCNT-exposed cells. Using multiplex assays to evaluate cytokine and chemokine secretion, we could show significant effects of MWCNTs on several chemokines, including CCL2, a ligand of CCR2. The results demonstrate the importance of evaluating sub-lethal concentrations of nanomaterials in relevant target cells
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Biodistribution of Nanoparticles in biological systems, Protein corona of NBMs

  • Moros, María
Resumen del trabajo presentado al 1st BIORIMA Training School, celebrado en Venecia (Italia) del 16 al 20 de abril de 2018., Once a nanoparticle (NP) is administered in vivo, it interacts with components of the physiological environment what results in the formation of a biomolecule corona. The NP corona is mostly composed of proteins (hence the protein corona (PC) definition) and it can dramatically change the nanomaterial size, aggregation state and interfacial properties. As a result the NP acquires a new biological identity that would dominate the in vivo behaviour. Therefore, investigation of the PC is of the upmost importance for understanding and controlling NPs performance in vivo. Moreover, long term studies encompassing the whole NP lifecycle are necessary to clarify the fears concerning NPs safety. Thoroughly, unravelling of the interactions of commonly known nanomaterials with living organisms could diminish the huge discrepancy between the produced numerous nanoscale size therapeutics and scarce clinical outcomes., BIORIMA project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 760928., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene-encapsulated magnetic nanoparticles for safe and steady delivery of ferulic acid in diabetic mice

  • Zhong, Baihua
  • Mateu Roldán, Adán
  • Fanarraga, Mónica L.
  • Han, Wei
  • Muñoz-Guerra, Débora
  • González, Jesús
  • Tao Weng, Lu
  • Ibarra, M. Ricardo
  • Marquina, Clara
  • Lun Yeung, King
Iron nanoparticles encapsulated within graphene shells (Fe@C) were examined for cellular internalization, subcellular behavior, biocompatibility, and influence on cell viability and proliferation. Studies on human lung (adenocarcinoma human alveolar basal epithelial) and skin (epidermoid carcinoma) cells indicate Fe@C is less toxic and more biocompatible than the magnetite nanoparticles coated by an amorphous carbon (Fe3O4@C). Fe3O4@C exhibited more signs of degradation than Fe@C when exposed to murine macrophages (mouse monocyte-macrophages J774). Unlike Fe3O4@C, Fe@C has a high drug loading capacity (0.18 g/g) for ferulic acid, an active pharmaceutical ingredient found in the traditional Chinese herb Angelica sinensis and releases the drug at a constant dosing rate of 8.75 mg/g/day over 30 days. Ferulic acid released by Fe@C injected subcutaneously in diabetic BALB/c mice is effective in lowering the blood glucose level., This work is supported by the Horizon 2020 BIORIMA project and the Hong Kong Research Grant Council E-HKUST601/17 and in part by the Project of Hetao Shenzhen-Hong Kong University of Science and Technology Innovation Cooperation Zone (HZQB-KCZYB-2020083). Dr. B.H. Zhong is a recipient of the HKJEBN Scholarship and his stay at INA is supported by the HKUST Overseas Research Award. The team is also grateful for the funding from the Spanish Ministerio de Economia y Competitividad (MINECO) through projects PI16/00496, PI19/00349, the Spanish Ministerio Ciencia e innovaccion (MICINN) through project DTS19/00033, co-funded by ERDF/ESF, “Investing in Your Future”. These results are part of the project PID2019-106947RB-C21 financed by MCIN/ AEI /10.13039/501100011033. The authors also thank the CSIC (through the project PIE 201960E119) and the Regional Government of Aragón (DGA) for financial support through grant E28_20R. Finally, the authors acknowledge the support of the Central Facilities of the Hong Kong University of Science and Technology including the Material Characterization and Preparation Facility (MCPF), the Environmental Central Facility (ENVF), and the Animal and Plant Care Facility (APCF) and the use of Servicio General de Apoyo a la Investigación-SAI of the University of Zaragoza, and the support from the Advanced Microscopy Laboratory (LMA) of the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Short and long-term effects of nanobiomaterials in fish cell lines. Applicability of RTgill-W1

  • Hernández-Moreno, David
  • Navas, José María
  • Fernández-Cruz, M. L.
10 Pág. Departamento de Medio Ambiente y Agronomía​ (INIA), Nanobiomaterials (NBMs) are nanostructured materials for biomedical applications that can reach aquatic organisms. The short and long-term effects of these emerging contaminants are unknown in fish. The RTgill-W1 cell line has been proposed as a model to predict the acute toxicity of chemicals to fish (OECD Test Guideline nº 249). We assessed the applicability of this cell line to study the short and long-term toxicity of 15 NBMs based onhydroxyapatites (HA), lipid (LSNP/LNP), gold, iron oxide, carbon, poly l-Lactide acid (PLLA) fibers with silver and poly (lactide-co-glycolide) acid. Two more rainbow trout cell lines (RTL-W1, from liver, and RTS-11, from spleen) were exposed, to identify possible sensitivity differences among cells. Exposures to a range of concentrations (0.78-100 μg/mL) lasted for 24 h. Additionally, the RTgill-W1 was used to perform long-term (28 d exposure) and recovery (14 d exposure/14 d recovery) assays. Cells were exposed to the 24 h-IC20 and/or to 100 μg/mL. A triple cytotoxicity assay was conducted. After 24 h, only PLLA Fibers-AgNPs showed cytotoxicity (IC50 < 100 μg/mL). However, the NBMs in general provoked concentration-dependent effects after long-term exposures, except the LSNPs. A recovery of viability was only observed for AuNPs, AuNRods, Fe3O4PEG-PLGA, MgHA-Collag_Scaffolds, Ti-HA and TiHA-Alg NPs.These results evidenced the need to test the long-term toxicity of NBMs and showed differences in cytotoxicity probably associated to different mechanisms of toxic action. The RTgill-W1 was useful to screen short and long-term toxicities of NBMs and appears as a promiseful model to assess possible toxicity of NBMs in fish., This work was funded from the European Union's Horizon 2020 Programme under Grant Agreement No 760928 (BIORIMA - BIOmaterial RIsk MAnagement). CIC biomaGUNE (Spain), Colorobbia Consulting SRL (Italy), Electrospinning company LTD (United Kingdom), Finceramica (Italy), ISTEC (Italy), Joint Research Cetre, Nanovector SRL (Italy) and UniTorino (Italy), supplied the NBMs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-dose exposure to polymer-coated iron oxide nanoparticles elicits autophagy-dependent ferroptosis in susceptible cancer cells

  • Lomphithak, Thanpisit
  • Helvacioglu, Selin
  • Armenia, Ilaria
  • Keshavan, Sandeep
  • Ovejero, Jesús G.
  • Baldi, Giovanni
  • Ravagli, Costanza
  • Grazú, Valeria
  • Fadeel, Bengt
This article belongs to the Special Issue Interaction of Nanomaterials with Biological Systems: In Vitro and In Vivo Studies., Ferroptosis, a form of iron-dependent, lipid peroxidation-driven cell death, has been extensively investigated in recent years, and several studies have suggested that the ferroptosis-inducing properties of iron-containing nanomaterials could be harnessed for cancer treatment. Here we evaluated the potential cytotoxicity of iron oxide nanoparticles, with and without cobalt functionalization (Fe2O3 and Fe2O3@Co-PEG), using an established, ferroptosis-sensitive fibrosarcoma cell line (HT1080) and a normal fibroblast cell line (BJ). In addition, we evaluated poly (ethylene glycol) (PEG)-poly(lactic-co-glycolic acid) (PLGA)-coated iron oxide nanoparticles (Fe3O4-PEG-PLGA). Our results showed that all the nanoparticles tested were essentially non-cytotoxic at concentrations up to 100 μg/mL. However, when the cells were exposed to higher concentrations (200–400 μg/mL), cell death with features of ferroptosis was observed, and this was more pronounced for the Co-functionalized nanoparticles. Furthermore, evidence was provided that the cell death triggered by the nanoparticles was autophagy-dependent. Taken together, the exposure to high concentrations of polymer-coated iron oxide nanoparticles triggers ferroptosis in susceptible human cancer cells., This work was supported by the Swedish Cancer Foundation (grant agreement no. CAN 2018/500), and the European Commission through the H2020 project BIORIMA (grant agreement no. 760928) and the H2020 project HOTZYMES (grant agreement no. 829162). V.G. acknowledges CIBER-Consorcio Centro de Investigación Biomédica en Red-(CB16/01/00263), Instituto de Salud Carlos III (Spanish Ministry of Science and Innovation), Gobierno de Aragón, and European Regional Development Fund (ERDF), for funding the multidisciplinary BIONANOSURF research group., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Environmental hazard testing of nanobiomaterials

  • Amorim, Mónica J. B.
  • Fernández-Cruz, M. L.
  • Hund-Rinke, K.
  • Scott-Fordsmand, J. J.
13 Pág., The European Medicines Agency (EMA) regards the potential risks of human medicinal products to the environment and their impacts are assessed, as well as management to limit this impact. Hazard assessment of novel materials, which differ from conventional chemicals, e.g. nanobiomaterials, poses testing challenges and represents a work-in-progress with much focus on the optimization of required methodologies. For this work-in-progress, we here highlight where changes/updates are required in relation to the main elements for international testing based on OECD guidelines, supported by knowledge from the nanotoxicity area. The outline describes two major sections, nanobiomaterials and environmental hazards, including its challenges and learned lessons, with recommendations for implementation in OECD guidelines. Finally, the way forward via a testing strategy is described.[Figure not available: see fulltext.]., This study was supported by the European Commission Project H2020-NMBP-2017 BIORIMA: BIOmaterial Risk MAnagement (GA No. 760928). Further support within H2020-NMBP-TO-IND-2018 NANORIGO: Establishing a NANOtechnology RIsk Governance Framework (GA No. 814530) and CESAM [UIDB/50017/2020 + UIDP/50017/2020], to FCT/MEC through national funds, and the co-funding by the FEDER, within the PT2020 Partnership Agreement and Compete 2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gel transformation as a general strategy for fabrication of highly porous multiscale MOF architectures

  • Liu, Zhang
  • Lopez Navas, Javier
  • Han, Wei
  • Ibarra, M. Ricardo
  • Kwan, Joseph Kai Cho
  • Yeung, King Lun
The structure and chemistry of metal–organic frameworks or MOFs dictate their properties and functionalities. However, their architecture and form are essential for facilitating the transport of molecules, the flow of electrons, the conduction of heat, the transmission of light, and the propagation of force, which are vital in many applications. This work explores the transformation of inorganic gels into MOFs as a general strategy to construct complex porous MOF architectures at nano, micro, and millimeter length scales. MOFs can be induced to form along three different pathways governed by gel dissolution, MOF nucleation, and crystallization kinetics. Slow gel dissolution, rapid nucleation, and moderate crystal growth result in a pseudomorphic transformation (pathway 1) that preserves the original network structure and pores, while a comparably faster crystallization displays significant localized structural changes but still preserves network interconnectivity (pathway 2). MOF exfoliates from the gel surface during rapid dissolution, thus inducing nucleation in the pore liquid leading to a dense assembly of percolated MOF particles (pathway 3). Thus, the prepared MOF 3D objects and architectures can be fabricated with superb mechanical strength (>98.7 MPa), excellent permeability (>3.4 × 10−10 m2), and large surface area (1100 m2 g−1) and mesopore volumes (1.1 cm3 g−1)., This work was supported by the Hong Kong Research Grants Council General Research Fund 16306322, Innovation and Technology Fund (ITS/300/18) of the Hong Kong Innovation and Technology Commission, the Shenzhen Basic Research Program (JCYJ20150630094001158), the Guangzhou Collaborative Innovation Key Program (201704030074), the European Union-Hong Kong Research and Innovation Cooperation Co-funding Mechanism (E-HKUST601/17) from the Hong Kong Research Grants Council, and the European Union's Horizon 2020 (BIORIMA). The mobility cost of Z. L., research exchange at INA, is borne by the grants from the HKUST Overseas Research Award and the Spanish Ministry of Science, Innovation and University (RTC-2017-6620-1 & PID2019-106947RB-C21). This work was supported in part by the project of Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone (HZQB-KCZYB2020083)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Insight into the molecular mechanism of organic pollutants’ adsorption on magnetic ZIF-8 synthesized via a transformational route

  • Liu, Zhang
  • Marquina, Clara
  • Han, Wei
  • Kwan, Joseph Kai Cho
  • Ibarra, M. Ricardo
  • Yeung, King Lun
This study presents the synthesis of Fe3O4@Zeolite Imidazolate Framework-8 (Fe3O4@ZIF-8), a novel magnetic core–shell adsorbent engineered for enhance adsorption of organic pollutants. The process begins with the formation of spherical magnetite aggregates (i.e., Fe3O4) via a solvothermal method, using polyacrylic acid for stabilization and capping. A ZIF-8 shell is then grown through a sol gel process followed by reaction with 2-methylimidazole, resulting in a crystalline shell approximately 60 nm thick. Characterization techniques, including energy dispersive X-ray analysis and X-ray diffraction, confirm the successful preparation of Fe3O4@ZIF-8. The adsorption capabilities were evaluated using methylene blue (MB) and diclofenac sodium (DCF) as model pollutants. Fe3O4@ZIF-8 demonstrated rapid removal efficiencies, with 98 % removal of MB (6.01 × 10-4 mg·g−1·min−1) and DCF (4.43 × 10-4 g·mg−1.min−1) within 15 and 30 min, respectively, significantly outperforming conventional activated carbon. Thermodynamic studies indicate that the adsorption processes are spontaneous; enthalpic changes drive MB adsorption, while DCF is influenced by entropic factors. Molecular modeling reveals preferential adsorption behaviors on different ZIF-8 facets, with stronger interactions for MB due to π-π stacking and hydrogen bonding. These findings underscore the potential of Fe3O4@ZIF-8 as an effective adsorbent for water purification, highlighting its substantial adsorption capacity (73.2 mg·g−1 for MB and 53.8 mg·g−1 for DCF), stability, and reusability., This work was supported by the Hong Kong Research Grants Council General Research Fund (16306322), Innovation and Technology Fund (ITS/300/18), GBA Institute of Collaborative Innovation (GICI-012), the European Union-Hong Kong Research and Innovation Cooperation Co-funding Mechanism by the Research Grants Council (E-HKUST601/17), and the European Union's Horizon 2020 (BIORIMA). The mobility cost of Z. L., research exchange at INA, is borne by the grants from the HKUST Overseas Research Award and the Spanish Ministry of Science, Innovation and University (RTC-2017-6620-1 & PID2019-106947RB-C21). This work was supported in part by the project of Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone (HZQB-KCZYB-2020083)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

High-dose exposure to polymer-coated iron oxide nanoparticles elicits autophagy-dependent ferroptosis in susceptible cancer cells

  • Lomphithak, Thanpisit
  • Helvacioglu, Selin
  • Armenia, Ilaria
  • Keshavan, Sandeep
  • Ovejero, Jesús G.
  • Baldi, Giovanni
  • Ravagli, Costanza
  • Grazú, Valeria
  • Fadeel, Bengt
Ferroptosis, a form of iron-dependent, lipid peroxidation-driven cell death, has been extensively investigated in recent years, and several studies have suggested that the ferroptosis-inducing properties of iron-containing nanomaterials could be harnessed for cancer treatment. Here we evaluated the potential cytotoxicity of iron oxide nanoparticles, with and without cobalt functionalization (Fe2O3 and Fe2O3@Co-PEG), using an established, ferroptosis-sensitive fibrosarcoma cell line (HT1080) and a normal fibroblast cell line (BJ). In addition, we evaluated poly (ethylene glycol) (PEG)-poly(lactic-co-glycolic acid) (PLGA)-coated iron oxide nanoparticles (Fe3O4-PEG-PLGA). Our results showed that all the nanoparticles tested were essentially non-cytotoxic at concentrations up to 100 μg/mL. However, when the cells were exposed to higher concentrations (200–400 μg/mL), cell death with features of ferroptosis was observed, and this was more pronounced for the Co-functionalized nanoparticles. Furthermore, evidence was provided that the cell death triggered by the nanoparticles was autophagy-dependent. Taken together, the exposure to high concentrations of polymer-coated iron oxide nanoparticles triggers ferroptosis in susceptible human cancer cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Gel transformation as a general strategy for fabrication of highly porous multiscale MOF architectures

  • Liu, Zhang
  • López Navas, Javier
  • Han, Wei
  • Ibarra, Manuel Ricardo
  • Cho Kwan, Joseph Kai
  • Yeung, King Lun
The structure and chemistry of metal–organic frameworks or MOFs dictate their properties and functionalities. However, their architecture and form are essential for facilitating the transport of molecules, the flow of electrons, the conduction of heat, the transmission of light, and the propagation of force, which are vital in many applications. This work explores the transformation of inorganic gels into MOFs as a general strategy to construct complex porous MOF architectures at nano, micro, and millimeter length scales. MOFs can be induced to form along three different pathways governed by gel dissolution, MOF nucleation, and crystallization kinetics. Slow gel dissolution, rapid nucleation, and moderate crystal growth result in a pseudomorphic transformation (pathway 1) that preserves the original network structure and pores, while a comparably faster crystallization displays significant localized structural changes but still preserves network interconnectivity (pathway 2). MOF exfoliates from the gel surface during rapid dissolution, thus inducing nucleation in the pore liquid leading to a dense assembly of percolated MOF particles (pathway 3). Thus, the prepared MOF 3D objects and architectures can be fabricated with superb mechanical strength (>98.7 MPa), excellent permeability (>3.4 × 10−10 m2), and large surface area (1100 m2 g−1) and mesopore volumes (1.1 cm3 g−1).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Insight into the molecular mechanism of organic pollutants’ adsorption on magnetic ZIF-8 synthesized via a transformational route

  • Liu, Zhang
  • Marquina, C.
  • Han, Wei
  • Kwan, Joseph K.C.
  • Ibarra, M. Ricardo
  • Yeung, King Lun
This study presents the synthesis of Fe3O4@Zeolite Imidazolate Framework-8 (Fe3O4@ZIF-8), a novel magnetic core–shell adsorbent engineered for enhance adsorption of organic pollutants. The process begins with the formation of spherical magnetite aggregates (i.e., Fe3O4) via a solvothermal method, using polyacrylic acid for stabilization and capping. A ZIF-8 shell is then grown through a sol gel process followed by reaction with 2-methylimidazole, resulting in a crystalline shell approximately 60 nm thick. Characterization techniques, including energy dispersive X-ray analysis and X-ray diffraction, confirm the successful preparation of Fe3O4@ZIF-8. The adsorption capabilities were evaluated using methylene blue (MB) and diclofenac sodium (DCF) as model pollutants. Fe3O4@ZIF-8 demonstrated rapid removal efficiencies, with 98 % removal of MB (6.01 × 10-4 mg·g−1·min−1) and DCF (4.43 × 10-4 g·mg−1.min−1) within 15 and 30 min, respectively, significantly outperforming conventional activated carbon. Thermodynamic studies indicate that the adsorption processes are spontaneous; enthalpic changes drive MB adsorption, while DCF is influenced by entropic factors. Molecular modeling reveals preferential adsorption behaviors on different ZIF-8 facets, with stronger interactions for MB due to π-π stacking and hydrogen bonding. These findings underscore the potential of Fe3O4@ZIF-8 as an effective adsorbent for water purification, highlighting its substantial adsorption capacity (73.2 mg·g−1 for MB and 53.8 mg·g−1 for DCF), stability, and reusability.