Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

In situ photodeposition of ultra-small palladium particles on TiO2

  • Kozyr, Elizaveta|||0000-0001-9308-5338
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Skorynina, A.|||0000-0001-9844-0220
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Escudero, Carlos|||0000-0001-8716-9391
  • Mino, Lorenzo|||0000-0002-9882-8361
  • Bugaev, Aram|||0000-0001-8273-2560
In situ and operando investigation of photocatalysts plays a fundamental role in understanding the processes of active phase formation and the mechanisms of catalytic reactions, which is crucial for the rational design of more efficient materials. Using a custom-made operando photocatalytic cell, an in situ procedure to follow the formation steps of Pd/TiO2 photocatalyst by synchrotron-based X-ray absorption spectroscopy (XAS) is proposed. The procedure resulted in the formation of ∼1nm Pd particles with a much narrower size distribution and homogeneous spreading over TiO2 support compared with the samples generated in a conventional batch reactor. The combination of in situ XAS spectroscopy with high-angle annular dark-field scanning transmission electron microscopy demonstrated the formation of single-atom Pd(0) sites on TiO2 as the initial step of the photodeposition process. Palladium hydride particles were observed for all investigated samples upon exposure to formic acid solutions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Powering Innovation Through Subsidised Tailored SME Access to European Research Infrastructures

  • Admans, Gary
  • Boix de la Cruz, Virginia
  • Mitchell, Edward
  • Sanchez, Alejandro
  • Valls Vidal, Núria
Small and medium-sized enterprises (SMEs) are repeatedly identified in European research and innovation policy as key drivers of economic growth and technological uptake, yet they remain structurally under-represented amongst users of European research infrastructures (RIs). Over the past decade, several European Commission–funded projects have experimented with subsidised, SME-oriented access mechanisms intended to reduce financial, organisational, and cognitive barriers to RI use. Drawing on evidence from initiatives centred on X-ray light source and free electron laser and infrastructures LEAPS (1) notably the TamaTA (Tailor-made for SME Transnational Access) (2) schemes under CALIPSOplus (3) (4) and LEAPS-INNOV (5) (6) and from a broader analytical research infrastructure network ReMade-at-ARI (7) (8), this paper reflects on how these schemes were designed, what they delivered and the lessons they offer for future science and innovation policy. The evidence suggests that subsidised access can be an effective policy instrument, but only when combined with appropriate and pragmatic delivery mechanisms designed for industry. Single entry points, rapid and rolling evaluation procedures, confidentiality-ready access conditions and hands-on support emerge as critical success factors. Where these elements are present, SMEs complete access, report innovation-relevant outcomes and, in some cases, progress towards repeat use of RIs. The paper concludes with recommendations aimed at consolidating subsidised SME access as a durable European-level capability rather than a series of project-based pilots.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Multivalent intercalation in Prussian blue analogues as a novel recovery method from spent Li-ion batteries

  • Carnero-Roldán, Victoria
  • Licari, Adrián
  • López Chías, Alejandro
  • Fernández-Merino, Ángela
  • La Mantia, Fabio
  • Trócoli, Rafael
Embargado hasta 01/05/2028, Finding alternative extraction sources of principal components for the manufacturing of Li-ion batteries has become of great interest owing to the ubiquitous presence of this storage system, from mobile to electric vehicles. Battery recycling has the potential to reduce reliance on conventional raw sources; however, current technologies suffer from numerous drawbacks, including environmental issues and low selectivity. The use of an intercalation material, a Prussian Blue Analogue, for the recovery of multivalent cations (Ni2+ and Co2+) from spent Li-ion batteries is demonstrated for the first time in this work. Firstly, the capacity of the material to intercalate the cations of interest in aqueous media was proven by a combination of electrochemical, structural, and composition analysis of the electrode and electrolyte, subsequently a novel electrochemical approach to extract Ni and Co from a NMC leachate was developed, being able to produce a recovered solution with a purity of 99.99% in Ni and Co in a single step owing to the extraordinary selectivity of Nickel Hexacyanoferrate towards these cations. These performances, combined with the reversibility of the material and the well-known low cost of Prussian Blue Analogues, open a promising new alternative for battery recycling.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In situ photodeposition of ultra-small palladium particles on TiO2

  • Kozyr, Elizaveta
  • Martí-Sànchez, Sara
  • Skorynina, Alina
  • Arbiol, Jordi
  • Escudero, Carlos
  • Mino, Lorenzo
  • Bugaev, Aram
In situ and operando investigation of photocatalysts plays a fundamental role in understanding the processes of active phase formation and the mechanisms of catalytic reactions, which is crucial for the rational design of more efficient materials. Using a custom-made operando photocatalytic cell, an in situ procedure to follow the formation steps of Pd/TiO2 photocatalyst by synchrotron-based X-ray absorption spectroscopy (XAS) is proposed. The procedure resulted in the formation of ∼1 nm Pd particles with a much narrower size distribution and homogeneous spreading over TiO2 support compared with the samples generated in a conventional batch reactor. The combination of in situ XAS spectroscopy with high-angle annular dark-field scanning transmission electron microscopy demonstrated the formation of single-atom Pd(0) sites on TiO2 as the initial step of the photodeposition process. Palladium hydride particles were observed for all investigated samples upon exposure to formic acid solutions., The authors acknowledge the ReMade@ARI project funded by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187 for providing access to HAADF STEM measurements. LM acknowledges support from the Project CH4.0 under the MUR program `Dipartimenti di Eccellenza 2023–2027' (CUP: D13C22003520001). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457 and is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No. CEX2021-001214-S) and funded by the CERCA Programme/Generalitat de Catalunya. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ ion luminescence characterization of defects produced in diamond by 6 MeV carbon ion irradiation

  • Jia, Gangyuan
  • Valls-Vicent, Francesc
  • Padhi, Santanu Kumar
  • Enríquez-Pérez, Esther
  • García, Gastón
  • Zhang, Yufei
  • Olivares Villegas, José
  • Wang, Kaiyue
7 pages, 8 figures, 2 tables, The present work is focused on the in-situ characterization of defects in single-crystal diamond induced by 6 MeV carbon ion beam irradiation using ionoluminescence (IL) spectroscopy. The main purpose was to study the optical properties of several defects following the IL evolution and characterize the damage degree using Raman spectra. Three emissions were recorded by IL spectra, located at 430, 504, 575.5 nm with ion fluence in the range of 0∼7 × 1014 cm−2, and were attributed to the A-band, 3H, and NV0 centers, respectively. The 3H centers exhibited a non-monotonic behavior with respect to fluence, with a rapid initial increase followed by a gradual decay. Based on a double exponential model, the data had been well-fitted, and the value of fluence at half of the initial luminescence (F1/2) was found to be notably high (of order 1014 cm−2). A simple Birks-Black model was applied to fit the evolution of the A-band and NV0 centers, and luminescence decays were observed with F1/2 values of (7.9 ± 2.2) × 1011 and (1.2 ± 0.6) × 1012 cm−2, respectively. At the initial stage of irradiation, the intensity decay of A-band and NV0 centers is accompanied by an increase of 3H centers, suggesting that there is a conversion between the defect types., This work was supported by China Scholarship Council (CSC, File No. 202308140156), National Natural Science Foundation of China (Grant No. U21A2073, 62304175), Shanxi Province Natural Science Foundation (Grant Nos. 202203021222207, 202203021211210, 202103021224268), the Taiyuan University of Science and Technology Research Initiation Fund Project (Grant Nos. 20222065, 20222005), the European Union as part of the Horizon Europe call HORIZON-INFRA- 2021-SERV-01 (Grant No. 101058414), co-funded by UK UKRI (Grant No. 10039728), the Swiss State Secretariat for Education, Research and Innovation (SERI) (Grant No. 22.00187), the Spanish Ministry of Science and Innovation (MICINN) (Grant No. PID2022-142417OB-I00 and PID2020-112770RB-C22), and the Madrid Regional Government through the TechnoFusion (III)-CM program (Grant No. S2018/EMT- 4437). The authors acknowledge the support from The Centro de Microanalisis de Materiales (CMAM) - Universidad Autonoma de Madrid, for the beam time proposals IMP- 006/24, and its technical staff for their contribution to the operation of the accelerator., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid nanocomposites of cerium oxide nanoparticles in chitosan/alginate to enhance the salinity stress tolerance of Carrizo citrange rootstock

  • Granata, Giuseppe
  • Vitiello, Libera
  • Boninelli, Simona
  • Curcuruto, Giusy
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Geraci, Corrada
  • Las Casas, Giuseppina
  • Torrisi, Biagio
  • Ferlito, Filippo
  • Dattilo, Sandro
  • Miritello, Maria
An innovative hybrid nanocomposite based on ceria was synthesized to enhance the salinity stress tolerance of Carrizo citrange rootstock. Our approach involved loading ceria nanoparticles (CeO2) in chitosan (Chi) and alginate (Alg) biopolymeric nanocomposites, obtaining a water dispersion easily sprayable to plants leaves. The material properties were assessed by chemical and morphological analysis, revealing the success of preparation in terms of nanometric sizes and stability. The quantification of metal oxide content in the Chi/Alg-CeO2 hybrid nanocomposite suspension was achieved by Inductively Coupled Plasma Mass Spectrometry resulting in 15 mg/L of cerium. The hybrid nanocomposite degradation was also studied by accelerated aging under UV-A radiation, evidencing a depletion of polymeric counterparts. The water dispersion of Chi/Alg-CeO2 hybrid nanocomposites was tested on one year old potted seedlings to evaluate its efficacy in mitigating the plant tolerance against saline stress. Morphological and biochemical behaviour together to antioxidant activities were monitored for different saline concentrations. Increased proline levels and total polyphenols were recorded with Chi/Alg-CeO2 treatment. Data revealed that Chi/Alg-CeO2 increased provided a remarkable solution in alleviating high levels of oxidative processes, allowing higher water absorption to form the root system, thus inducing plant growth in conditions of mid-low photosynthetic capacity., The research was funded by the Italian Project PNNR “Sicilian MicronanoTech Research and Innovation Center” (SAMOTHRACE), Ecosistema dell’Innovazione, grant number ECS00000022, CUP B63C22000620005. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. M. C. S. acknowledges Horizon Europe call HORIZON-INFRA-2021-SERV-01 project ReMade@ARI under grant agreement number 101058414. All the authors thank Dr. Marco Leonardi and Dr. Veronica Parrinello for their contribution in the nanocomposites synthesis., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

ZnO Nanostars Decorated with Mass-Selected Au Clusters for Photoluminescence

  • Di Mari, Gisella Maria
  • Mineo, Giacometta
  • Hoddinott, Henry
  • Strano, Vincenzina
  • Lentini Campallegio, Claudio
  • Mundet, Bernat
  • Martí-Sànchez, Sara
  • Franzò, Giorgia
  • Arbiol, Jordi
  • Von Issendorff, Bernd
  • Held, Georg
  • Palmer, Richard
  • Bruno, Elena
  • Mirabella, Salvo
  • Spadaro, Maria Chiara
Hybrid nanostructures combining semiconductor materials and noble metal clusters of atoms (nanoparticles) are of high interest in the energy sector and catalysis, with the idea of tuning the physicochemical properties of the system toward the desired performance. The design of this type of complex system requires the appropriate selection of the material combination to optimize the desired properties. However, less attention has been devoted to the effect of cluster size. In this work, we investigate the size and density effects for mass-selected monometallic Au clusters decorating ZnO-based nanostars. The Au clusters were prepared with narrow control of their size, in terms of atoms per cluster, via cluster deposition in a vacuum and mass selection with a cluster beam source. We study the coupling of ZnO nanostars with deposited Au N (N = 55, 147, and 309) clusters. We exploit transmission electron microscopy and Rutherford backscattering spectrometry for the structural characterization and for the determination of Au cluster density, obtaining 3.43 × 1012, 4.55 × 1011, and 7.98 × 1010 clusters/cm2 for samples decorated with Au clusters containing 55, 147, and 309 atoms, respectively. Moreover, we highlight the formation of a Schottky junction by performing photoluminescence investigations. We find distinctive changes in the behavior of the visible and UV emission as a function of the cluster size and density on the ZnO-based nanostars, identifying an increase of the photoluminescence efficiency with the decrease of the cluster dimension. Our findings indicate the enormous potential that a proper selection of cluster size offers in the fabrication of nanocomposite materials with precise electronic properties., This work was financially supported by the European Union–next Generation EU, Mission 4, Component 2 via the project NanoStore, under the “PRIN PNRR 2022” call (project ID: P20227TNLX, CUP number B53D23028380001 and E53D23016050001). Funded also by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and cofunded by UK Research and Innovation (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor the granting authorities can be held responsible for them. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM. (29) ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge the use of the InCAEM infrastructure of the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya.Cluster deposition was financially supported by both the Materials and Manufacturing Academy (M2A), part funded by the European Social Fund through the Welsh Government and the Engineering and Physical Sciences Research Council (EPSRC), and by Diamond Light Source Ltd through studentship [STU0385]. This work was supported by the project “NANOscience for STRatEgic applicatioNs from Green to healTH (NANO STRENGTH)”-Linea di Intervento 1-Progetti di Ricerca Collaborativa del “PIAno di inCEntivi per la RIcerca di Ateneo 2024/2026 Università di Catania., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improving Ni(OH)2 electrocatalysis with graphene quantum dots

  • Urso, Mario
  • Battiato, Sergio
  • Gholamiarjenaki, Nabiollah
  • Rabelo Freitas, Helena
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Sanna, Michela
  • Kumar, Sanjay
  • Pumera, Martin
  • Terrasi, Antonio
  • Priolo, Francesco
  • Mirabella, Salvo
Water splitting is a critical process for sustainable energy transition, involving the electrolysis of water into its constituent elements, hydrogen and oxygen. In this study, we demonstrate the superior electrocatalytic activity of graphene quantum dots (GQDs)-decorated nickel hydroxide (Ni(OH)<inf>2</inf>) nanostructures for the oxygen evolution reaction (OER) in alkaline media. Ni(OH)<inf>2</inf> nanowalls are synthesized on graphene paper substrates by chemical bath deposition (CBD) and uniformly decorated with GQDs. Precise optimization of the GQDs amount indicates that a low number of GQDs offers limited improvement of the OER, while a high number is unfavorable due to the minor exposed surface of the electrocatalyst. Instead, an intermediate quantity of GQDs significantly enhances the OER performance metrics, leading to a low overpotential at 10 mA cm<sup>−2</sup> current density (η<inf>10</inf>) of 308 mV and a Tafel slope of 53 mV dec<sup>−1</sup>, rapid electron transfer, high turnover frequency (TOF) of 5.5 × 10<sup>−2</sup> s<sup>−1</sup> at 350 mV overpotential, large electrochemically active surface area (ESCA) of 145 cm<sup>2</sup>, good durability, and good cycling stability in 1 M KOH electrolyte (pH 14). Mott–Schottky analysis sheds light on the OER mechanism, revealing the role of GQDs in increasing the surface hole density of Ni(OH)<inf>2</inf>, thereby boosting the OER efficiency., M.U. acknowledges the financial support by the Ministry of University and Research, under the “PNRR─Missione 4 “Istruzione e Ricerca”─Componente 2 “Dalla Ricerca all’Impresa” Investimento 1.2 “Finanziamento di progetti presentati da giovani ricercatori”, project ID: SOE_0000044, CUP number: E63C22002970006. This work was supported by the project "NANOscience for STRatEgic applicatioNs from Green to healTH (NANO STRENGTH)" - Linea di Intervento 1- Progetti di Ricerca Collaborativa del “PIAno di inCEntivi per la RIcerca di Ateneo 2024/2026 Università di Catania. This research was funded by the project AIM1804097 Programma Operativo Nazionale FSE −FESR “Ricerca e Innovazione 2014–2020” and partially funded by European Union (NextGeneration EU), through the MUR-PNRR project SAMOTHRACE (ECS00000022). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. Funded by the Horizon Europe call HORIZON-INFRA-2021-SERV-01 project ReMade@ARI under grant agreement number 101058414. ICN2 is founding member of e-DREAM. [71] The work was supported by ERDF/ESF project TECHSCALE (No. CZ.02.01.01/00/22_008/0004587). This research was co-funded by the European Union under the REFRESH - Research Excellence For REgion Sustainability and High-tech Industries project number CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-temperature oxygen-assisted molecular beam epitaxy of BaWO4 on W(110): growth mechanism and structural characterization

  • Gutiérrez-Cuesta, Clara
  • Rojo-Silva, V.
  • Prieto, J. E.
  • Mandziak, Anna
  • Nita, Pawel
  • Del Campo, Adolfo
  • Kwiatek-Maroszek, Natalia
  • Cojocariu, Iulia
  • Szpytma, Marcin
  • Fevola, Giovanni
  • Mascaraque, Arantzazu
  • Marco, J.F.
  • Onur Menteş, Tevfik
  • Locatelli, Andrea
  • Quesada, Adrián
  • de la Figuera, Juan
8 pages, 6 figures, 1 table, We have studied the growth of barium tungstate, BaWO4, by high-temperature oxygen-assisted molecular beam epitaxy on W(110). Barium tungstate grows in the form of isosceles triangular-shaped islands, tens of micrometers wide and tens of nanometers in height. The growth was monitored in real time by low-energy electron microscopy and characterized in situ by low-energy electron diffraction, X-ray absorption and X-ray photoelectron spectroscopies. Further ex situ characterization was performed by optical and atomic force microscopies and Raman spectroscopy. Barium tungstate growth on W(110) was performed by dosing only barium in a molecular oxygen atmosphere due to incorporation of W atoms from the W(110) substrate. The islands correspond to the BaWO4 (011) crystallographic orientation and their sides are aligned along the [001] and [11̄1] directions of the BaWO4 crystal., This work was supported by Grants PID2021-124585NB-C31 and PID2021-124585NB-C33, grant Mag4TIC-CM funded by the TEC-2024/TEC-380 program of the Comunidad de Madrid and by the BEETHOVEN project funded by the European Commission under grant agreement 101129912. It was also funded by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by UK Research and Innovation (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Education and Culture Executive Agency (EACEA) or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor EACEA or the granting authorities can be held responsible for them. This work has received support from the European Union under the Horizon Europe programme, project NEPHEWS– Neutrons and Photons Elevating Worldwide Science (No. 101131414)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfaces in Epitaxially Grown Zn3P2 Nanowires and Their Composition-Dependent Optoelectronic Properties for Photovoltaic Applications

  • Escobar Steinvall, Simon
  • Salutari, Francesco
  • Johansson, Jonas
  • Das, Ishika
  • Lehmann, Sebastian
  • Church, Stephen A.
  • Spadaro, Maria Chiara
  • Parkinson, Patrick
  • Arbiol, Jordi
  • Dick, Kimberly A.
Epitaxially grown nanowires have shown promise for photovoltaic applications due to their nanophotonic properties. Moreover, the mechanical properties of nanowires can reduce crystallographic defect formation at interfaces to help enable new material combinations for photovoltaics. One material that stands to benefit from the nanowire morphology is zinc phosphide (Zn3P2), which, despite promising optoelectronic properties, has experienced limited applicability due to challenges achieving heteroepitaxy, stemming from its incompatible lattice parameter and coefficient of thermal expansion. Herein, we identify the requirements for successful epitaxy of Zn3P2 nanowires using metalorganic chemical vapor deposition and the impact on interface structure and defect formation. Furthermore, using high-throughput optical spectroscopy, we were able to demonstrate shifts in the photoluminescence intensity and energy by tuning the V/II ratio during growth, highlighting the compositional tunability of the optoelectronic properties of Zn3P2 nanowires., S.E.S. acknowledges support from the Wenner-Gren Foundation, the Åforsk Foundation and the Crafoord Foundation. The authors also acknowledge support from NanoLund, the Lund Nano Lab (myfab Lund), and Horizon Europe through the Pathfinder project SOLARUP (project number: 101046297). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. Funded by the Horizon Europe call HORIZON-INFRA-2021-SERV-01 project ReMade@ARI under grant agreement number 101058414. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA), in part through project 20240310035. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM. (44) P. P. acknowledges support under the UKRI Future Leaders Fellowships scheme (MR/Y03421X/1)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-pot fabrication of GA-functionalized Cu-nanoparticles by pulsed laser ablation for electrochemical biosensors development

  • Iacono, Valentina
  • Rabelo Freitas, Helena
  • Pulvirenti, Luca
  • Piper, Andrew
  • Merkoçi, Arben
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Ruffino, Francesco
  • Mirabella, Salvo
Functionalized nanoparticles (NPs) are widely used in nanobiosensor fabrication providing improved selectivity and good conductivity. Synthesis of functional nanomaterials is often costly and typically requires several functionalization steps. In this work, we used Pulsed Laser Ablation in Liquids (PLAL) to synthetize and functionalize at the same time copper (Cu) NPs with glutamic acid (GA). A Cu target immersed in a GA solution and hit by a laser led to Cu ablation, NP formation and amine groups bonding at the NPs surface. The GA-functionalized Cu NPs were immobilized onto an electrode and linked to antibodies for alpha-synuclein protein. A successful protein detection was achieved through electrochemical impedance spectroscopy (EIS) measurements at concentration in the pg/mL range. A careful optimization of NP synthesis showed an improved experimental LoD (10 pg/mL) by varying the amount of GA- Cu NPs and the PLAL environment, demonstrating this one-pot fabrication of GA-functionalised Cu-nanoparticles by PLAL as a valuable method for high sensitivity electrochemical sensing electrode., This work has been partially funded by European Union (NextGeneration EU), through the MUR-PNRR project SAMOTHRACE (Grant No. ECS00000022). The authors thank the Bio-nanotech Research and Innovation Tower (BRIT) laboratory of the University of Catania for the PHI Versa Probe XPS facility and Prof. G. G. Condorelli (University of Catania) for XPS measurements provided. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Grant RED2022-134508-T (CAT&SCALE) funded by MCIN/AEI /10.13039/501100011033. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is founding member of e-DREAM ​[59]. Partially funded also by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor the granting authorities can be held responsible for them., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long-range structural and magnetic coherence in embedded mesospin metamaterials

  • Vantaraki, Christina
  • Bikondoa, Oier
  • Grassi, Matías P.
  • Ojha, Brindaban
  • Stamatelatos, Alkaios
  • Kwiatek-Maroszek, Natalia
  • Niño, Miguel Ángel
  • Foerster, Michael
  • Saerbeck, Thomas
  • Primetzhofer, Daniel
  • Wolff, Max
  • Jaouen, Nicolas
  • Hase, Thomas P. A.
  • Kapaklis, Vassilios
23 pages main article, 9 pages supplementary information, 7 figure in main article, 7 figures in supplementary information, [Data availability] The data that support the findings of this study are available from the corresponding authors upon reasonable request. Neutron scattering data are available at: KAPAKLIS VASSILIOS, CUBITT Robert, SAERBECK Thomas, VANTARAKI Christina, & WOLFF Maximilian. (2024). Magnetic metamaterials produced by ion-implantation (ReMade - TNA) [Dataset]. Institut Laue-Langevin (ILL). DOI:10.5291/ILL-DATA.DIR-329., Engineered assemblies of interacting magnetic elements—magnetic metamaterials—provide a powerful route to tailor collective magnetic order and dynamics. By structuring matter at the mesoscale, they bridge atomic magnetism and macroscopic functionality, enabling emergent behaviour inaccessible in conventional materials. However, realizing large-area metamaterials that combine high morphological uniformity with intrinsic long-range order has remained challenging, largely due to the structural disorder inherent to lithographic fabrication. Here we demonstrate a scalable route to structurally and magnetically coherent metamaterials by embedding iron-ions to form mesospins within a non-magnetic thin film palladium host matrix. Using controlled implantation, we realize morphologically uniform arrays that spontaneously develop extended antiferromagnetic order in the as-fabricated state—without the need of external annealing or field cycling. Resonant X-ray scattering and microscopy reveal sharp magnetic Bragg peaks modulated by the mesospin form factor, evidencing long-range antiferromagnetic order coupled to structural coherence. This embedded architecture establishes a platform for exploring coherent spin–photon interactions and functional X-ray scattering in magnetic metamaterials free from lithographic topography and disorder., Open access funding provided by Uppsala University. The authors are thankful for an infrastructure grant by VR-RFI (grant number 2019-00191) supporting the accelerator operation. The authors also acknowledge support from the Swedish Research Council (projects no. 2019-03581 and 2023-06359). CV gratefully acknowledges financial support from the Colonias-Jansson Foundation, Thelin-Gertrud Foundation, Liljewalch and Sederholm Foundation. OB acknowledges support from EPSRC through the XMaS National Research Facility at the ESRF. We acknowledge Myfab Uppsala for providing facilities and experimental support. Myfab is funded by the Swedish Research Council (2020-00207) as a national research infrastructure. The PEEM-XMCD experiments were performed at CIRCE (bl24) beamline at ALBA Synchrotron with the collaboration of ALBA staff. MF and MANO acknowledge support from MICIN through grant number PID2021-122980OB-C54. Funded by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by UK Research and Innovation (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor the granting authorities can be held responsible for them., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bile salts govern protein bioaccessibility and nanostructural assembly during digestion of Nori seaweed

  • Correa, Yubexi
  • Cebrián-Lloret, Vera
  • López-Sánchez, Patricia
  • Martínez, Juan Carlos
  • López-Rubio, Amparo
  • Fevola, Giovanni
  • Alba Venero, Diego
  • Zhang, Yi
  • Greving, Imke
  • Flenner, Silja
  • Martínez Sanz, Marta
Seaweeds are increasingly recognized as sustainable and nutritious candidates to support future food systems, yet the mechanisms governing their digestibility remain poorly understood. In this work, we show that the cell walls of Nori seaweed (Porphyra umbilicalis) are highly resistant to gastric digestion, with protein release occurring primarily during the intestinal phase. Using a multiscale analytical approach, including advanced tools such as small-angle X-ray and neutron scattering and nanotomography, we tracked in vitro digestion-induced nanoscale structural reorganization. We found that porphyran-rich extracellular networks restrict enzyme accessibility during gastric digestion, whereas bile salts in the intestinal environment promote polysaccharide and protein solubilization, enhancing proteolysis. These interactions, in turn, hinder the structural ordering and correlation of bile salt nanomicelles in the digesta. These findings reveal the key role of bile salts in the digestion process, not only governing protein digestibility, but also influencing the nanostructuring of digestion products. More broadly, this work establishes a mechanistic framework to investigate how nanoscale self-assembly during digestion influences nutrient transport and physiological responses., This work was funded by the European Union (ERC, PRODIGEST, ERC-2022-COG 101086483). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council Executive Agency. Neither the European Union nor the granting authority can be held responsible for them. Synchrotron experiments were performed at the NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposals 2023077631 and 2024078506). SANS experiments were performed at ISIS Neutron and Muon Source (RB2428001; data available: https://doi.org/10.5286/ISIS.E.RB2428001), cryo-TEM characterization of digesta was done at the Life Science EM facility of the Ernst-Ruska Centre at Forschungszentrum Jülich. We acknowledge Helmholtz-Zentrum Hereon and DESY, members of the Helmholtz Association HGF, for the provision of the experimental infrastructure and the provision of beamtime at P05 at PETRA III for proposal(s) PID30299. This research was supported in part through the Maxwell computational resources operated at DESY. All of these experiments were funded by the REMADE proposal PID30299, which was funded by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by UK Research and Innovation (UKRI) under the UK government's Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union, the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor the granting authorities can be held responsible for them. Vera Cebrián was supported by a postdoctoral fellowship funded by the Ministerio de Ciencia, Innovación y Universidades from Spain (JDC2024-053925-I). The Accreditation of IATA-CSIC as Center of Excellence Severo Ochoa CEX2021- 001189-S funded by MCIN/AEI/10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Waste-to-MoS2 binder-free 2H-MoS2 microflowers for ammonium-ion supercapacitors with operando mechanistic insights

  • Ursino, F.
  • Di Mauro, A.
  • Mineo, Giacometta
  • Pulvirenti, Luca
  • Ariese, F.
  • Ramanan, C.
  • Martin-Diaconescu, Vlad
  • Simonelli, Laura
  • Alarcon, C.
  • Salutari, Francesco
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Cabot, Andreu
  • Terrasi, Antonio
  • Mirabella, Salvo
Developing sustainable energy-storage devices is an increasingly urgent challenge, yet the conversion of recycled feedstocks into high-performance, binder-free electrodes operating in environmentally friendly electrolytes remains underexplored. Here, we synthesize MoS<inf>2</inf> nanostructures from Mo-based industrial waste via hydrothermal sulfurization and systematically investigate the effects of precursor-solution pH and hydrothermal temperature on morphology, structure, and electrochemical behaviour. Microscopy and spectroscopy confirm the formation of layered 2H-MoS<inf>2</inf> and show that higher temperature promotes microflower-like architectures and suppresses oxygen-containing residues, consistent with more complete sulfurization. The materials were directly evaluated as binder-free electrodes in 1 M (NH<inf>4</inf>)<inf>2</inf>SO<inf>4</inf>, exhibiting quasi-rectangular voltammograms and surface-dominated charge storage. Increasing the hydrothermal temperature enhances the capacitance by ∼33% at 5 mV s<sup>−1</sup>. By combining microflower-like MoS<inf>2</inf> with a carbon paper substrate, the specific capacitance reaches 1200 F g<sup>−1</sup> at 5 mV s<sup>−1</sup>, with improved rate capability (300 F g<sup>−1</sup> at 10 A g<sup>−1</sup>). A CR2032 proof-of-concept device assembled with a biochar counter electrode delivers 309 F g<sup>−1</sup> at 1 A g<sup>−1</sup> and an energy/power density of 52 Wh kg<sup>−1</sup> at 550 W kg<sup>−1</sup>. Operando X-ray absorption spectroscopy and Raman measurements reveal intermediate structural/chemical changes during cycling, providing insight into the interfacial storage mechanism and degradation pathways. Overall, this work demonstrates a viable route to valorise Mo-based waste into high-performance binder-free MoS<inf>2</inf> electrodes for ammonium-ion supercapacitor devices., Raman, XAS and part of TEM measurements shown in this work were executed as part of proposal 20250330052 in ReMade@ARI project, hence funded by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by UK Research and Innovation (UKRI) under the UK government's Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor the granting authorities can be held responsible for them. XAS experiments were performed at the ALBA Synchrotron (BL-22 CLÆSS) with the collaboration of ALBA staff as part of experiment 20250330052. The electrochemical measurements were performed thanks to the Italian ministry MUR-PNRR project SAMOTHRACE (ECS00000022) by the European Union (NextGeneration EU). Materials and reagents were purchased through the project “NANOscience for STRatEgic applicatioNs from Green to healTH (NANO STRENGTH)” - Linea di Intervento 1- Progetti di Ricerca Collaborativa del “PIAno di inCEntivi per la RIcerca di Ateneo 2024/2026 Università di Catania. Part of the TEM measurements were funded by the European Union – next Generation EU, Mission 4, Component 2 via the project NanoStore, under the “PRIN PNRR 2022” call, project ID: P20227TNLX, CUP number: I53D23006650001. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge support from the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Part of TEM measurements has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is founding member of e-DREAM [83]., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed