Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Stoichiometry modulates the optoelectronic functionality of zinc phosphide (Zn3−xP2+x)

  • Stutz, Elias Z.
  • Ramanandan, Santhanu P.
  • Flór, Mischa
  • Paul, Rajrupa
  • Zamani, Mahdi
  • Escobar Steinvall, Simon
  • Sandoval, Diego Armando
  • Xifra, Clàudia
  • Spadaro, Maria Chiara
  • Leran, Jean-Baptiste
  • Litvinchuk, Alexander P.
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
  • Dimitrievska, Mirjana
Predictive synthesis-structure-property relationships are at the core of materials design for novel applications. In this regard, correlations between the compositional stoichiometry variations and functional properties are essential for enhancing the performance of devices based on these materials. In this work, we investigate the effect of stoichiometry variations and defects on the structural and optoelectronic properties of monocrystalline zinc phosphide (ZnP), a promising compound for photovoltaic applications. We use experimental methods, such as electron and X-ray diffraction and Raman spectroscopy, along with density functional theory calculations, to showcase the favorable creation of P interstitial defects over Zn vacancies in P-rich and Zn-poor compositional regions. Photoluminescence and absorption measurements show that these defects create additional energy levels at about 180 meV above the valence band. Furthermore, they lead to the narrowing of the bandgap, due to the creation of band tails in the region of around 10-20 meV above the valence and below the conduction band. The ability of zinc phosphide to form off-stoichiometric compounds provides a new promising opportunity for tunable functionality that benefits applications. In that regard, this study is crucial for the further development of zinc phosphide and its application in optoelectronic and photovoltaic devices, and should pave the way for defect engineering in this kind of material., The authors gratefully acknowledge support from the Swiss National Science Foundation (SNSF) through project BSCGI0_157705, the NCCR SPIN and from the Max Planck-EPFL Center for Molecular Nanoscience and Technology, as well as the Max Planck Graduate Center for Quantum Materials. M. D. acknowledges funding from H2020 through the Marie Curie Project SMARTCELL (project number 101022257). ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327. The authors acknowledge support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. M. C. S. acknowledges Juan de la Cierva. The authors are thankful to funding from Horizon Europe through the PathFinder Open project SOLARUP (project number 101046297).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Me-4PACz Functionalized MXene for Halide Perovskite Solar Cells

  • Karimipour, Masoud
  • Oliveras, Nil Monrós
  • Tian, Zhenchuan
  • Salutari, Francesco
  • Spadaro, Maria Chiara
  • Zhang, Tiankai
  • Vahedigharehchopogh, Naji
  • Arbiol, Jordi
  • Gao, Feng
  • Lira-Cantú, Mónica
Interfacial passivation employing 2D Ti3C2 MXenes has proved to be an excellent strategy to optimize band alignment and passivate defects, leading to the reduction of non-radiative recombination in Perovskite Solar Cells (PSCs). Here in, the synthesis and functionalization of Ti3C2 MXene are reported with the [4-(3,6-Dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid molecule (MXene:Me-4PACz), which is proved by XRD and HRTEM-EELS analyses. Its application at the interface between the halide perovskite (HP) and the Spiro-OMeTAD in normal configuration PSCs, results in the enhancement of indoor and outdoor stability. The MXene:Me-4PACz nanomaterial is obtained in the form of nanoneedles, which, applied in complete PSCs, resulted in a power conversion efficiency (PCE) of ≈21.5%, in comparison with the control device with ≈20.1%. The modified device showed a T88 operational stability obtained at 1000 h for ISOS-L-1 and T50 at ≈1000 h for ISOS-O-2. While, all the control devices degraded 55% after 1000 h under ISOS-L and almost 100% after 900 h under ISOS-O-2. Characterization analyses indicate that the efficiency and stability enhancement is due to the improved energy band alignment and charge extraction, to the increased perovskite surface hydrophobicity, and the significant reduction of deep and shallow trap states., The authors give thanks to the Spanish State Research Agency for the grant PerMXSol (PID2022-143344OB-I00). This work was part of the project PCI2020-112185, granted by MCIN/AEI/10.13039/501100011033 project and the “NextGenerationEU”/PRTR. To the OrgEnergy Excelence Network (CTQ2016-81911- REDT), to the Agencia de Gestió d'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2021 SGR 01617 and the Xarxa d'R+D+I Energy for Society (XRE4S). Part of this work was under Materials Science Ph.D. Degree for Z.T. of the Universitat Autonoma de Barcelona (UAB, Spain). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (grant no. European Union SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The authors thank the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under grant no. SEV-2017-0706 for the postdoctoral contract to M.K. and the PhD scholarship PRE2022-000291 granted to Z.T. F.G. would also like to thank the supporting fund from the Swedish Energy Agency (P2022-00756). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. The authors thank funding from Horizon Europe through the PathFinder Open project SOLARUP (project number 101046297). ICN2 is a founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Link between graphene features and the resulting functionality of quasi-van der Waals Zn3P2

  • Hagger, Thomas
  • Rabelo Freitas, Helena
  • Mastropasqua, Chiara
  • El Alouani, Ahmed
  • Marinoni, Stefano
  • Kawashima, Nico
  • Lemerle, Raphael
  • Wodzislawski, Kamil Artur
  • Dede, Didem
  • Botti, Silvana
  • Spadaro, Maria Chiara
  • Piazza, Valerio
  • Michon, Adrien
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
Zn3P2, made from earth-abundant elements, is a promising candidate for thin-film solar cells but faces limitations due to difficulties in achieving n-type doping and its large lattice mismatch with commercial substrates and a high thermal expansion coefficient, causing defects and cracks. Graphene substrates can address these challenges thanks to its weak van der Waals interactions with Zn3P2 allowing for mechanical transfer of the thin film and strain-free growth. This study compares five graphene substrates for quasi-van der Waals epitaxial (q-vdWe) growth of polycrystalline Zn3P2 thin films using molecular beam epitaxy. Surface features like steps and wrinkles on graphene were identified as main nucleation sites for Zn3P2, provided the graphene has minimal point defects. The highest-quality thin films, with the largest grain sizes, were grown on H-CVD graphene on the Si-face of 6H-SiC, featuring solely terraces of atomic height. All substrates showed comparable growth windows for crystalline Zn3P2, with higher growth temperatures improving crystal quality, as indicated by enhanced photoluminescence. Cryo-cathodoluminescence measurements revealed spatially localized sub-bandgap emissions, potentially linked to localized strain fields at grain boundaries of up to ±3% as identified by cross-sectional transmission electron microscopy. This work provides insights into advantages and drawbacks of utilising q-vdWe to produce Zn3P2 thin films for solar cell applications and highlights the effects of graphene substrate choice and growth parameters on Zn3P2 film quality., TH acknowledges funding from the COST grant (IZCOZ0_220221). VP gratefully acknowledges the funding from the SNF Spark grant (CRSK-2_221120). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors thank funding from Horizon Europe through the PathFinder Open project SOLARUP (project number 101046297). The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.69 Graphene growth at CRHEA was supported by the Region Sud-Provence-Alpes-Côte d'Azur through the PlaGGe project, by the ANR through the VanaSiC project (ANR-22-CE24-0022-01), and by the ANR in the framework of the PEPR Electronique through the ADICT project (ANR-22-PEEL-0011). The authors also acknowledge the use of instrumentation as well as the technical advice provided by the Interdisciplinary Center for Electron Microscopy (CIME) and the Center of MicroNanoTechnology (CMi) and the Crystal Growth Facility at EPFL., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfaces in Epitaxially Grown Zn3P2 Nanowires and Their Composition-Dependent Optoelectronic Properties for Photovoltaic Applications

  • Escobar Steinvall, Simon
  • Salutari, Francesco
  • Johansson, Jonas
  • Das, Ishika
  • Lehmann, Sebastian
  • Church, Stephen A.
  • Spadaro, Maria Chiara
  • Parkinson, Patrick
  • Arbiol, Jordi
  • Dick, Kimberly A.
Epitaxially grown nanowires have shown promise for photovoltaic applications due to their nanophotonic properties. Moreover, the mechanical properties of nanowires can reduce crystallographic defect formation at interfaces to help enable new material combinations for photovoltaics. One material that stands to benefit from the nanowire morphology is zinc phosphide (Zn3P2), which, despite promising optoelectronic properties, has experienced limited applicability due to challenges achieving heteroepitaxy, stemming from its incompatible lattice parameter and coefficient of thermal expansion. Herein, we identify the requirements for successful epitaxy of Zn3P2 nanowires using metalorganic chemical vapor deposition and the impact on interface structure and defect formation. Furthermore, using high-throughput optical spectroscopy, we were able to demonstrate shifts in the photoluminescence intensity and energy by tuning the V/II ratio during growth, highlighting the compositional tunability of the optoelectronic properties of Zn3P2 nanowires., S.E.S. acknowledges support from the Wenner-Gren Foundation, the Åforsk Foundation and the Crafoord Foundation. The authors also acknowledge support from NanoLund, the Lund Nano Lab (myfab Lund), and Horizon Europe through the Pathfinder project SOLARUP (project number: 101046297). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. Funded by the Horizon Europe call HORIZON-INFRA-2021-SERV-01 project ReMade@ARI under grant agreement number 101058414. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA), in part through project 20240310035. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM. (44) P. P. acknowledges support under the UKRI Future Leaders Fellowships scheme (MR/Y03421X/1)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long-term protection of crystalline zinc phosphide (Zn3P2) under atmospheric conditions

  • Tiede, Anja
  • Lemerle, Raphael
  • Hagger, Thomas
  • Rabelo Freitas, Helena
  • Torrens Sampedro, Marta
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
Earth-abundant zinc phosphide (Zn<inf>3</inf>P<inf>2</inf>) holds great promise as a photovoltaic absorber for thin-film applications, owing to its direct bandgap of ∼1.5 eV and its high absorption coefficient in the visible spectrum. Nonetheless, questions remain about the material’s stability in atmospheric environments, given its tendency to react with surrounding water vapor and oxygen. This work presents a comprehensive long-term study to understand how environmental exposure impacts high-quality, monocrystalline epitaxial zinc phosphide. Through a combination of various experimental techniques, such as ellipsometry, Raman spectroscopy, x-ray diffraction measurements, scanning transmission electron microscopy, energy dispersive x-ray spectroscopy, secondary ion mass spectroscopy, and x-ray photoelectron spectroscopy, we reveal that exposure to the atmosphere causes substantial oxidation of the thin film surface, penetrating several tens of nanometers into the bulk material. Finally, we show that degradation can be effectively prevented by applying a thin dielectric layer, such as Si<inf>3</inf>N<inf>4</inf>, or by simply storing the unprotected thin films under vacuum. These findings provide valuable guidelines for the proper handling of the material prior to device fabrication., A.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 945363. T.H. acknowledges funding from the COST (Grant No. IZCOZ0_220221). H.R. acknowledges funding from the OPERA COST (Grant No. CA_20116). Part of this work was funded by Horizon Europe through the PathFinder Open project SOLARUP (Project No. 101046297). The authors thank E. Alarcón-Lladó for critically reviewing the manuscript, the EPFL EPiX platform for growth facilities, EPFL CMi and CiMe for nanofabrication and characterization infrastructure, and EPFL X-Ray Diffraction and Surface Analytics Facility, specifically Mounir Driss Mensi, for the XPS measurements. The authors acknowledge the use of the InCAEM infrastructure of the Advanced Materials program by the Spanish Government, which has funding from the European Union NextGenerationEU (Grant No. PRTR-C17.I1) and Generalitat de Catalunya. ICN2 was supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No. CEX2021-001214-S) and was funded by the CERCA Program/Generalitat de Catalunya. ICN2 acknowledges funding from Generalitat de Catalunya Grant No. 2021SGR00457. Part of the present work was performed in the framework of the Universitat Autònoma de Barcelona Materials Science Ph.D. program. The authors acknowledge the use of instrumentation and the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant No. IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.31, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

DATASET for Long-term protection of crystalline zinc phosphide (Zn3P2) under atmospheric conditions

  • Tiede, Anja
  • Lemerle, Raphael
  • Hagger, Thomas
  • Rabelo Freitas, Helena
  • Torrens Sampedro, Marta
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
This dataset contains experimental measurement data and analysis files used to generate the figures of the associated publication. It includes raw and modeled spectroscopic ellipsometry data, X-ray diffraction (XRD), Raman spectroscopy, secondary-ion mass spectrometry (SIMS), X-ray photoelectron spectroscopy (XPS), and photoluminescence data. -- The data are organized by manuscript figure and supplementary figure number and are provided together with Jupyter notebooks used for data processing and visualization. Detailed information on data acquisition is provided in the associated publication, while the dataset structure and usage are described in the accompanying README file. -- Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) data are provided in a separate associated dataset archived at https://doi.org/10.34810/data2689., Dataset for the work titled: Long-term protection of crystalline zinc phosphide (Zn₃P₂) under atmospheric conditions, European Commission: EPFLglobaLeaders - A new PhD training for the next generation of sustainable science leaders; 945363. -- Swiss National Science Foundation: Challenges and opportunities of epitaxy of semiconductors on Graphene; 220221. -- European Cooperation in Science and Technology: European Network for Innovative and Advanced Epitaxy; CA20116. -- European Commission: SOLARUP - Advanced Strategies for Development of Sustainable Semiconductors for Scalable Solar Cell Applications; 101046297. -- European Commission: PRTR-C17.I1. -- European Commission: IU16-014206. -- Government of Catalonia: 2021SGR00457. -- Ministerio de Ciencia, Innovación y Universidades: Severo Ochoa Excellence prorgam; CEX2021-001214-S, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Replication Data for: Long-term protection of crystalline zinc phosphide under atmospheric conditions

  • Rabelo Freitas, Helena
  • Arbiol, Jordi
  • Torrens Sampedro, Marta
  • Spadaro, Maria Chiara
  • Fontcuberta i Morral, Anna
  • Tiede, Anja
  • Lemerle, Raphael
  • Hagger, Thomas
Earth-abundant zinc phosphide (Zn3P2) holds great promise as a photovoltaic absorber for thin-film applications, owing to its direct bandgap of approximately 1.5 eV and its high absorption coefficient in the visible spectrum. Nonetheless, questions remain about the material’s stability in atmospheric environments, given its tendency to react with surrounding water vapor and oxygen. This work presents a comprehensive long-term study to understand how environmental exposure impacts high-quality, monocrystalline epitaxial zinc phosphide. Through a combination of various experimental techniques, such as ellipsometry, Raman spectroscopy, X-ray diffraction measurements, scanning transmission electron microscopy, energy dispersive X-ray spectroscopy, secondary ion mass spectroscopy, and X-ray photoelectron spectroscopy, we reveal that exposure to atmosphere causes substantial oxidation of the thin film surface, penetrating several tens of nanometers into the bulk material. Finally, we show that degradation can be effectively prevented by applying a thin dielectric layer, such as Si3N4 ,or simply by storing the unprotected thin films under vacuum. These findings provide valuable guidelines for the proper handling of the material prior to device fabrication., European Union’s Horizon 2020 Marie Sk lodowska-Curie grant: 945363; COST grant: IZCOZ0 220221; OPERA COST grant: CA 20116; Horizon Europe PathFinder Open project SOLARUP: 101046297; European Union NextGenerationEU: PRTRC17.I1; Severo Ochoa program from Spanish MCIN / AEI: CEX2021-001214-S; Generalitat de Catalunya: 2021SGR00457; European Regional Development Fund (ERDF): IU16-014206, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Replication data for: "Link between graphene features and the resulting functionality of quasi-Van der Waals Zn3P2"

  • Rabelo Freitas, Helena
  • Arbiol, Jordi
  • Spadaro, Maria Chiara
  • Fontcuberta i Morral, Anna
  • Lemerle, Raphael
  • Hagger, Thomas
  • Dede, Didem
  • Piazza, Valerio
  • Mastropasqua, Chiara
  • Marinoni, Stefano
  • Kawashima, Nico
  • Wodzislawski, Kamil Artur
  • Botti, Silvana
  • Michon, Adrien
  • El Alouani, Ahmed
"-Zn3P2, made from earth-abundant elements, is a promising candidate for thin-film solar cells but faces limitations due, to difficulties in achieving n-type doping and its large lattice mismatch with commercial substrates and a high thermal expansion coefficient, causing defects and cracks. Graphene substrates can address these challenges thanks to its weak Van der Waals interactions with Zn3P2 allowing for mechanical transfer of the thin film and a strain-free growth. This study compares five graphene substrates for quasi-Van der Waals epitaxial (q-VdWe) growth of polycrystalline Zn3P2 thin films using molecular beam epitaxy. Surface features like steps and wrinkles on graphene were identified as main nucleation sites for Zn3P2, provided the graphene has minimal point defects. The highest-quality thin films, with the largest grain sizes, were grown on H-CVD graphene on the Si-face of 6H-SiC, featuring solely terraces of atomic height. All substrates showed comparable growth windows for crystalline Zn3P2, with higher growth temperatures improving crystal quality, as indicated by enhanced photoluminescence. Cryo-cathodoluminescence measurements revealed spatially localized sub-bandgap emissions, potentially linked to localized strain fields at grain boundaries of up to ±3% as identified by cross-sectional transmission electron microscopy. This work provides insights into advantages and drawbacks of utilising q-VdWe to produce Zn3P2 thin films for solar cell applications and highlights the roles of graphene substrate choice and growth parameters on Zn3P2 film quality.", COST grant: Grant number: IZCOZ0_220221; SNF Spark grant: Grant number: CRSK-2_221120; Grant agency: Generalitat de Catalunya: Grant number: 2021SGR00457; Grant agency: European Union NextGenerationEU: Grant number: PRTR-C17.I1 ; Grant agency: Severo Ochoa program from Spanish MCIN: Grant number: CEX2021-001214-S; Grant agency: Horizon Europe through the PathFinder Open project SOLARUP: Grant number: -101046297; Grant agency: European Regional Development Fund (ERDF): Grant number: IU16-014206; Grant agency: VanaSiC project: Grant number: ANR-22-CE24-0022-01; Grant agency: ADICT project: Grant number: ANR-22-PEEL-0011, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanopatterning optimization of zinc phosphide: hole mobility up to 560 cm2/V s with selective area epitaxy

  • Lemerle, Raphael
  • Rabelo Freitas, Helena
  • Hagger, Thomas
  • Dede, Didem
  • Webb, Leo Evan
  • Aigroz, Cynthia
  • Piazza, Valerio
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
Zinc phosphide (Zn3P2) has been identified as a promising material for low-cost photovoltaics made of earth-abundant elements. In the 90's, the low performance of the devices based on Zn3P2 was attributed to the poor quality of the crystal. Recently, selective area epitaxy (SAE) has emerged as a method to obtain high quality materials on lattice mismatched substrates, thanks to efficient strain relaxation. Here, we study the relation between the SAE mask characteristics and the resulting optoelectronic properties of Zn3P2 thin films. Photoluminescence spectroscopy and temperature-dependent Hall measurements outline the impact of those defects on the optoelectronic properties of the thin films. We correlate the effect of the SAE mask pattern on the formation of specific defects such as misfit dislocations and rotated domains. Our results suggest that the rotated domains contribute to the carrier transport by providing p-type carriers while the misfit dislocations are mainly acting as non-radiative recombination centers. Our thickness dependent measurements highlight the key role of the SiO2/Zn3P2 interface, which could induce a highly p-doped region. Overall, these findings drove the optimization of the SAE pattern leading to the highest hole mobility (560 cm2/V s) ever measured for this material., This work was supported by the Swiss State Secretariat for Education, Research and lnnovation (SERI) under contract number 22.00018 and by Horizon Europe through the Pathfinder project SOLARUP (project number: 101046297). The authors also acknowledge the Center of MicroNanoTechnology (CMI), the Interdisciplinary Center for Electron Microscopy (CIME) and the Institute of Physics (IPHYS) facilities of EPFL for their technical support. VP acknowledges funding from Swiss National Science Foundation (SNSF Spark grant CRSK-2-221120). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge the use of the InCAEM infrastructure of the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant no.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM.45, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Replication Data for: Nanopatterning Optimization of Zinc Phosphide: Hole Mobility up to 560 cm2/Vs with Selective Area Epitaxy (Version 1.1) [Dataset]

  • Rabelo Freitas, Helena
  • Jordi Arbiol
  • Spadaro, Maria Chiara
  • Fontcuberta i Morral, Anna
  • Lemerle, Raphael
  • Hagger, Thomas
  • Dede, Didem
  • Piazza, Valerio
  • Webb, Leo Evan
  • Aigroz, Cynthia
Zinc phosphide (Zn3P2) has been identified as a promising material for low-cost photovoltaics made of earth-abundant elements. In the 90’s, the low performance of the devices based on Zn3P2 was attributed to the poor quality of the crystal. Recently, selective area epitaxy (SAE) has emerged as a method to obtain high quality materials on lattice mismatched substrates, thanks to efficient strain relaxation. Here, we study the relation between the SAE mask characteristics and the resulting optoelectronic properties of Zn3P2 thin films. Photoluminescence spectroscopy and temperature dependent Hall measurements outline the impact of those defects on the optoelectronic properties of the thin films. We correlate the effect of the SAE mask pattern on the formation of specific defects such as stacking faults and rotated domains. Our results suggest that the rotated domains contribute to the carrier transport by providing p-type carriers while the stacking faults are mainly acting as non-radiative recombination centers. Our thickness dependent measurements highlight the key role of the SiO2/Zn3P2 interface, which could induce a highly p-doped region. Overall, these findings drove the optimization of the SAE pattern leading to a record hole mobility (520 cm2/Vs) ever measured for this material. (2025-10-22), Kind of Data: Experimental data; Images, Grant agency: Swiss State Secretariat for Education, Research and lnnovation (SERI), grant number: 2200018; Grant agency: Horizon Europe PathFinder Open project SOLARUP, Grant number: 101046297; Grant agency: Swiss National Science Foundation (SNSF Spark grant), Grant number: CRSK-2-221120; Grant agency: Generalitat de Catalunya, Grant number: 2021SGR00457; Grant agency: European Union NextGenerationEU, Grant number: PRTRC17.I1; Grant agency: Severo Ochoa program from Spanish MCIN / AEI, Grant number: CEX2021-001214-S; Grant agency: European Regional Development Fund (ERDF), Grant number: IU16-014206, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Stoichiometry modulates the optoelectronic functionality of zinc phosphide (Zn3-xP2+x)

  • Stutz, Elias Z.|||0000-0003-1079-8063
  • Ramanandan, Santhanu Panikar|||0000-0003-2832-8641
  • Flór, Mischa|||0000-0001-9871-4746
  • Paul, Rajrupa
  • Zamani, Mahdi|||0000-0003-0750-2938
  • Escobar Steinvall, Simon|||0000-0003-4993-2979
  • Sandoval Salaiza, Diego Armando
  • Xifra Montesinos, Clàudia
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Leran, Jean-Baptiste
  • Litvinchuk, Alexander P.
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
  • Dimitrievska, Mirjana|||0000-0002-9439-1019
Predictive synthesis-structure-property relationships are at the core of materials design for novel applications. In this regard, correlations between the compositional stoichiometry variations and functional properties are essential for enhancing the performance of devices based on these materials. In this work, we investigate the effect of stoichiometry variations and defects on the structural and optoelectronic properties of monocrystalline zinc phosphide (ZnP), a promising compound for photovoltaic applications. We use experimental methods, such as electron and X-ray diffraction and Raman spectroscopy, along with density functional theory calculations, to showcase the favorable creation of P interstitial defects over Zn vacancies in P-rich and Zn-poor compositional regions. Photoluminescence and absorption measurements show that these defects create additional energy levels at about 180 meV above the valence band. Furthermore, they lead to the narrowing of the bandgap, due to the creation of band tails in the region of around 10-20 meV above the valence and below the conduction band. The ability of zinc phosphide to form off-stoichiometric compounds provides a new promising opportunity for tunable functionality that benefits applications. In that regard, this study is crucial for the further development of zinc phosphide and its application in optoelectronic and photovoltaic devices, and should pave the way for defect engineering in this kind of material.