Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mesoporous Ni-Pt nanoparticles on Ni foam by electrodeposition, Dual porosity for efficient alkaline hydrogen evolution

  • Eiler, Konrad|||0000-0001-8648-6395
  • Alcaide, Francisco|||0000-0002-3373-3978
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
In order to maximise electrochemically active surface area for water splitting, mesoporous Ni-Pt nanoparticles (NPs) are electrodeposited onto open-cell Ni foam to obtain a dual (macro- and meso-) porosity. Homogeneous deposition of the NPs is achieved by the use of a cylindrical Pt-coated mesh counter electrode, establishing a uniform electric field around the Ni foam substrate during electrodeposition. The Ni/Pt ratio is tunable with the electrodeposition parameters and all NPs are single-phase face-centred cubic solid solution and nanocrystalline, with a pore size of approx. 10 nm. Ni foam decorated with the Ni-rich particles, with mean particle sizes ranging from 50 to 80 nm, shows significantly higher activity at hydrogen evolution reaction (HER) in alkaline media with respect to the bare Ni foam. The highest HER efficiency was found fora relatively low Pt content of the NPs of about 26 at% (i. e., at 74 at% Ni) with an improvement of a factor 8 over bare Ni foam after durability assessment. These improvements are attributed to the higher surface area thanks to the NP structure, the dual porosity, and the alloying with Pt.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PS-b-P4VP block copolymer micelles as a soft template to grow openly porous nickel films for alkaline hydrogen evolution

  • Fagotto Clavijo, Roberto
  • Riba Moliner, Marta
  • González Campo, Arántzazu
  • Sort, Jordi
  • Pellicer, Eva
  • Eiler, Konrad
Highly porous Ni films have been potentiostatically synthesised by micelle-assisted electrodeposition using custom-made PS-b-P4VP block copolymer micelles as a soft template. Two PS-b-P4VP block copolymers with PS/P4VP block ratios of 1:1 and 1:4 were used for the micelle-assisted electrodeposition, resulting in Ni films with large pores of diameters varying from 25 to 600 nm (1:1), and from 10 to 230 nm (1:4). As a result of the interconnected porosity, and hence the drastic increase of the surface-to-volume ratio, the electrocatalytic performance at hydrogen evolution reaction (HER) in alkaline media is significantly improved in comparison to a dense Ni film, and—more importantly—even in comparison to a highly mesoporous Ni film with monodisperse 10 nm wide pores. Most remarkably, it is discovered that the openly porous Ni electrocatalysts not only lead to a simple increase in HER current density, but also to a lower overpotential and a better long-term performance. While the bulk of the films is metallic, Ni(OH)2 is formed on the surfaces of all Ni films during HER. This effect leads to an initial decrease of the catalytic activity, but provides excellent stability in alkaline media. The presented synthesis process for pure Ni may be readily adopted to any other electroplatable metals and alloys., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101058076 and the Marie Skłodowska-Curie grant agreement No 764977. Additional funding was obtained from the Generalitat de Catalunya under project 2017-SGR-292 and the Spanish Government under PID2019–108794 GB-I00, PID2020–116844RB-C21, and associated FEDER Project. KE acknowledges the Spanish Ministerio de Universidades for a Margarita Salas fellowship, financed by the European Union – NextGenerationEU. AGC acknowledges financial support from the Spanish Ministry of Science through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE, 2020–2023)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Contribución de congreso (ConferenceOutput)

Effects of the composition and structure of mesoporous Ni-Pt films on their corrosion behaviour in acidic media used for hydrogen evolution reaction

  • Eiler, Konrad|||0000-0001-8648-6395
  • Krawiec, Halina
  • Kozina, Iryna
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tailoring magnetic and mechanical properties of mesoporous single-phase Ni-Pt films by electrodeposition

  • Eiler, Konrad|||0000-0001-8648-6395
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Homogeneous mesoporous Ni-rich Ni-Pt thin films with adjustable composition have been synthesised by one-step micelle-assisted electrodeposition. The films exhibit a face-centred cubic solid solution (single phase) and their magnetic and mechanical properties can be tuned by varying the alloy composition. In particular, the Curie temperature (TC) is shown to decrease with the Pt content and thin films with a TC close to room temperature (i.e. Ni58Pt42) and below can be produced. Hysteresis loops show a decrease of saturation magnetisation (Ms) and coercivity (Hc) with decreasing Ni content. A comparison of porous and dense films reveals significantly lower saturation magnetic field strength for porous films. Concerning mechanical properties, mainly two trends can be observed: a decrease of the Young's modulus of the nanoporous films with respect to dense films by 10% in average and a progressive increase of Young's modulus with the Ni content from 4.2 GPa to 5.7 GPa in both types of films. The tunability of properties and facility of synthesis make this alloy a promising material for microelectromechanical systems (MEMS).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electrochemically Fabricated Surface-Mesostructured CuNi Bimetallic Catalysts for Hydrogen Production in Alkaline Media

  • Bai, Jingyuan
  • Zhang, Jin
  • Eiler, Konrad|||0000-0001-8648-6395
  • Yang, Zhou
  • Fan, Longyi
  • Yang, Dalong
  • Zhang, Meilin
  • Hou, Yupu|||0000-0003-0864-3847
  • Guan, Renguo
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Ni-based bimetallic films with 20 at.% and 45 at.% Cu and mesostructured surfaces were prepared by electrodeposition from an aqueous solution containing micelles of P123 triblock copolymer serving as a structure-directing agent. The pH value of the electrolytic solution had a key effect on both the resulting Cu/Ni ratio and the surface topology. The catalytic activity of the CuNi films toward hydrogen evolution reaction was investigated by cyclic voltammetry (CV) in 1 M KOH electrolyte at room temperature. The CuNi film showed the highest activity (even higher than that of a non-mesostructured pure Ni film), which was attributed to the Ni content at the utmost surface, as demonstrated by CV studies, as well as the presence of a highly corrugated surface.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Oxygen reduction reaction and proton exchange membrane fuel cell performance of pulse electrodeposited Pt-Ni and Pt-Ni-Mo(O) nanoparticles

  • Eiler, Konrad|||0000-0001-8648-6395
  • Mølmen, Live|||0000-0002-2788-960X
  • Fast, Lars|||0000-0002-3038-4039
  • Leisner, Peter|||0000-0002-7095-1907
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Proton exchange membrane fuel cells (PEMFCs) are an important alternative to fossil fuels and a complement to batteries for the electrification of vehicles. However, their high cost obstructs commercialization, and the catalyst material, including its synthesis, constitutes one of the major cost components. In this work, Pt-Ni and Pt-Ni-Mo(O) nanoparticles (NPs) of varying composition have been synthesized in a single step by pulse electrodeposition onto a PEMFC's gas diffusion layer. The proposed synthesis route combines NP synthesis and their fixation onto the microporous carbon layer in a single step. Both Pt-Ni and Pt-Ni-Mo(O) catalysts exhibit extremely high mass activities at oxygen reduction reaction (ORR) with very low Pt loadings of around 4 μg/cm2 due to the favorable distribution of NPs in contact with the proton exchange membrane. Particle sizes of 40-50 nm and 40-80 nm were obtained for Pt-Ni and Pt-Ni-Mo(O) systems, respectively. The highest ORR mass activities were found for Pt67Ni33 and Pt66Ni32-MoOx NPs. The feasibility of a single-step electrodeposition of Pt-Ni-Mo(O) NPs was successfully demonstrated; however, the ternary NPs are of more amorphous nature in contrast to the crystalline, binary Pt-Ni particles, due to the oxidized state of Mo. Nevertheless, despite their heterogeneous nature, the ternary NPs show homogeneous behavior even on a microscopic scale.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Motion analysis and real-time trajectory prediction of magnetically steerable catalytic Janus micromotors

  • Wu, Jiaen|||0000-0001-5020-873X
  • Folio, David|||0000-0001-9430-6091
  • Zhu, Jiawei
  • Jang, Bumjin
  • Chen, Xiangzhong|||0000-0002-2294-7487
  • Feng, Junxiao
  • Gambardella, Pietro|||0000-0003-0031-9217
  • Sort, Jordi|||0000-0003-1213-3639
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
  • Ergeneman, Olgaç
  • Ferreira, Antoine
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Chemically driven micromotors display unpredictable trajectories due to the rotational Brownian motion interacting with the surrounding fluid molecules. This hampers the practical applications of these tiny robots, particularly where precise control is a requisite. To overcome the rotational Brownian motion and increase motion directionality, robots are often decorated with a magnetic composition and guided by an external magnetic field. However, despite the straightforward method, explicit analysis and modeling of their motion have been limited. Here, catalytic Janus micromotors are fabricated with distinct magnetizations and a controlled self-propelled motion with magnetic steering is shown. To analyze their dynamic behavior, a dynamic model that can successfully predict the trajectory of micromotors in uniform viscous flows in real time by incorporating a form of state-dependent-coefficient with a robust two-stage Kalman filter is theoretically developed. A good agreement is observed between the theoretically predicted dynamics and experimental observations over a wide range of model parameter variations. The developed model can be universally adopted to various designs of catalytic micro-/nanomotors with different sizes, geometries, and materials, even in diverse fuel solutions. Finally, the proposed model can be used as a platform for biosensing, detecting fuel concentration, or determining small-scale motors' propulsion mechanisms in an unknown environment.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

PS-b-P4VP block copolymer micelles as a soft template to grow openly porous nickel films for alkaline hydrogen evolution

  • Fagotto Clavijo, Roberto
  • Riba-Moliner, Marta
  • González Campo, Arántzazu|||0000-0002-1209-8119
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
  • Eiler, Konrad|||0000-0001-8648-6395
Highly porous Ni films have been potentiostatically synthesised by micelle-assisted electrodeposition using custom-made PS-b-P4VP block copolymer micelles as a soft template. Two PS-b-P4VP block copolymers with PS/P4VP block ratios of 1:1 and 1:4 were used for the micelle-assisted electrodeposition, resulting in Ni films with large pores of diameters varying from 25 to 600 nm (1:1), and from 10 to 230 nm (1:4). As a result of the interconnected porosity, and hence the drastic increase of the surface-to-volume ratio, the electrocatalytic performance at hydrogen evolution reaction (HER) in alkaline media is significantly improved in comparison to a dense Ni film, and-more importantly-even in comparison to a highly mesoporous Ni film with monodisperse 10 nm wide pores. Most remarkably, it is discovered that the openly porous Ni electrocatalysts not only lead to a simple increase in HER current density, but also to a lower overpotential and a better long-term performance. While the bulk of the films is metallic, Ni(OH)2 is formed on the surfaces of all Ni films during HER. This effect leads to an initial decrease of the catalytic activity, but provides excellent stability in alkaline media. The presented synthesis process for pure Ni may be readily adopted to any other electroplatable metals and alloys.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Recent advances in catalyst materials for proton exchange membrane fuel cells

  • Mølmen, Live|||0000-0002-2788-960X
  • Eiler, Konrad|||0000-0001-8648-6395
  • Fast, Lars|||0000-0002-3038-4039
  • Leisner, Peter|||0000-0002-7095-1907
  • Pellicer, Eva|||0000-0002-8901-0998
Research on fuel cell technology is constantly gaining importance, while global emission requirements are becoming more and more restrictive. For environmentally neutral proton exchange membrane fuel cells (PEMFCs) to become a competitive technology, sustainable infrastructures need to be established. One of the main showstoppers is the utilization of the rare and therefore costly precious metal Pt as the key element in the electrocatalysis of hydrogen and oxygen. A huge amount of research is done on immensely reducing or even replacing Pt for future PEMFC technology. In this research update, the progress on oxygen reduction reaction catalysts in acidic media over the past two years is reviewed, with special attention to their durability.