DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication
Artículo científico (JournalArticle)
Towards Oxide Electronics: a Roadmap
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore’s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community.
Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics., The authors acknowledge financial support from the Netherlands Organization for Scientific Research (NWO). We acknowledge fruitful interactions with our many collaborators in the realm of artificial quantum materials, especially the groups of J.C. Séamus Davis, Craig J. Fennie, Eun-Ah Kim, Lena F. Kourkoutis, and David A. Muller. This work was supported by the National Science Foundation (Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM)) under Cooperative Agreement No. DMR-1539918. Financial support from the Spanish Ministry of Economy and Competitiveness (SEV-2015-0496, MAT2014-56063-C2-1-R, and MAT2017-85232-R), from Generalitat de Catalunya (2014 SGR 734), and from Slovenian Research Agency (P2-0091 and J2-6759) is acknowledged. The authors acknowledge funding from the EPSRC grant EP/ P027032/1. Prof. O. Nilsen is acknowledged for valuable discussions on the current status of ALD perovskites. Author thanks fruitful discussions with Dr. J. Santiso. Financial support from the Spanish Ministry of Economy and Competitiveness through the ''Severo Ochoa" Programme for Centres of Excellence in R&D (SEV-2015-0496), and projects MAT2015-71664-R and MAT2015- 67593-P is acknowledged. This work was supported by PARADIM, a National Science Foundation Materials Innovation Platform (Grant DMR-1539918), and by the Air Force Office of Scientific Research (Award number FA 9550-16-1-0305). Funding from the DFG (German Science Foundation) within the collaborative research center SFB 917 'Nanoswitches' and the W2/ W3 program of the Helmholtz association is gratefully acknowledged. We furthermore acknowledge funding by the ToBE CoST action (MP1308). We acknowledge financial support from the ERC Consolidator grant ‘‘MINT” (contract number n° 615759) and the ANR project ‘‘FERROMON”. This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agreement 732642 (ULPEC project). This work is supported by a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Labex NanoSaclay, reference: ANR-10-LABX-0035). This work was supported in part by the EFRE fund of the European Commission, by the Free State of Saxony (Germany), and by funding of the Deutsche Forschungsgemeinschaft (DFG project: Inferox). This work was supported in parts by the Deutsche Forschungsge-meinschaft (DFG) under Grant SFB 917 ''Nanoswitches" and the COST Action MP1308 ''TO-BE (Towards Oxide-Based Electronics)". This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agree-ment 732642 (ULPEC project). We thank M. Belmoubarik and J. Uzuhashi for their technical assistance for Fig. 36. We acknowledge support from the ImPACT Program of Council for Science, Technology and Innovation, Japan. Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA. We thank the financial support from the SNSF NRP70 ‘‘Energy Turnaround” and GRAPHENE project supported by the European Commission Seventh Framework Programme under contract 604391 is gratefully acknowledged. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295; for the grant ENE2016-79282-C5-2-R and the OrgEnergy Excelence NetworkCTQ2016-81911-REDT. To the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l’Energia (Xarmae). To the CERCA Pro-gramme/Generalitat de Catalunya and to the European COST Action StableNextSol project MP1307. The authors would like to acknowledge the financial support from ACCIO-Generalitat de Catalunya and the European Union for the 3D-PHOTOXIDES ERA-NET MANUNET II and from IV Fondo de Emprendedores of Fundación Repsol for the SOLAR OXIDES project. The authors would also thank Mr. Andrés Gómez from Institut de Ciència de Materials de Barcelona (ICMAB) for the pc-AFM measure-ments and Mr. Alex Hernández from Institut de Recerca en Energia de Catalunya (IREC) for the sputtering and valuable guidance. We would like to acknowledge the financial support granted by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, and associated FEDER], I.F. acknowledges Ramon y Cajal contract RYC-2017-22531, the Generalitat de Catalunya (2014-SGR-734). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). C.P. and B.D. acknowledge a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Grant No. ANR-10-LABX-0035, Labex NanoSaclay). The authors would like to acknowledge L. Pereira and P. Bar-quinha for fruitful discussions during the manuscript preparation. We acknowledge the funding from Portuguese Foundation for Science and Technology, Reference UID/CTM/50025/2013 and FEDER funds through the COMPETE 2020 Programme under the project number POCI-01-0145-FEDER-007688. Part of this work is partially financed from European Community H2020 program under grant agreements No. 665046 (project Symbiotic) and No. 644631 (project Roll-Out). Several of the recent advances in electrochromic and ther-mochromic materials, reported above, were reached with financial support received from the European Research Council under the European Community’s Seventh Framework Program (FP2007– 2013)/ERC Grant Agreement No. 267234 (‘‘GRINDOOR”)., Peer reviewed
Project:
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 SEV-2015-0496
,
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 MAT2014-56063-C2-1-R
,
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 MAT2015-71664-R
,
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 MAT2015-67593-P
,
EC / FP7 615759
,
EC / H2020 732642
,
EC / FP7 619456
,
EC / FP7 604391
,
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 SEV-2013-0295
,
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 ENE2016-79282-C5-2-R
,
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 CTQ2016-81911-REDT
,
EC / FP7 266549
,
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 MAT2014-57960-C3-1-R
,
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 MAT2015-73839-JIN
,
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 MAT2014-51778-C2-1-R
,
EC / H2020 665046
,
EC / H2020 644631
,
EC / FP7 267234
View at: http://hdl.handle.net/10261/191996