Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 42
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strain-Controlled Responsiveness of Slave Half-Doped Manganite La0.5Sr0.5MnO3 Layers Inserted in BaTiO3 Ferroelectric Tunnel Junctions

  • Radaelli, Greta
  • Gutiérrez Yatacue, Diego F.
  • Mengdi, Qian
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Baldrati, Lorenzo
  • Heidler, Jakoba
  • Piamonteze, Cinthia
  • Bertacco, Riccardo
  • Fontcuberta, Josep
Insertion of layers displaying field-induced metal-to-insulator (M/I) transition in ferroelectric tunnel junctions (FTJs) has received attention as a potentially useful way to enlarge junction tunnel electroresistance (TER). Half-doped manganites being at the verge of metal-insulator character are thus good candidates to be slave layers in FTJs. However, the phase diagram of these oxides is extremely sensitive to strain and thus can be radically different when integrated in epitaxial FTJs. Here we report a systematic study of large-area (A = 4 to 100 m2) Pt/La0.5Sr0.5MnO3/BaTiO3/La0.7Sr0.3MnO3 (Pt/HD/BTO/LSMO) FTJs, having different thicknesses of the ferroelectric (2-3nm) and HD layers (1-2nm), grown on substrates imposing either tensile (SrTiO3) or compressive (LaAlO3) strains. Room-temperature electric characterization of the FTJs shows polarization-controlled ON/ OFF states. Clear evidences of field-induced M/I transition (difference between junction resistance in OFF and ON state is increased of more than one order of magnitude) are observed in junctions prepared on SrTiO3 but the HD layer is generally metallic on LaAlO3. Moreover, the M/I transition is only confined in an interfacial layer of the slave film thus entailing an overall reduction of TER. The orderly results reported here give some hints towards selection of HD materials and substrates for optimal FTJ responsiveness., This work has been partially supported by grants from the Spanish Government (MAT2014-56063-C2-1R, MAT2015-73839-JIN and SEV-2015-0496), by the Catalan Government (2014 SGR 734) and by Fondazione Cariplo via the project MAGISTER (grant n. 2013-0726). IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dielectric characterization of multiferroic magnetoelectric double-perovskite Y(Ni0.5Mn0.5)O3 thin films

  • Coy, L.E.
  • Fina, Ignasi
  • Ventura Altozano, Jofre
  • Yate, L.
  • Langenberg, Eric
  • Polo, Mª. del Carmen
  • Ferrater Martorell, César
  • Varela, M.
We report on the functional properties of the Y(Ni0.5Mn0.5)O3 epitaxial thin films, growth by pulsed laser deposition, observing the clear features of their ferroelectric and ferromagnetic nature at cryogenic temperature. The characterization of temperature-dependent complex impedance spectroscopy has shown a dielectric anomaly around the ferromagnetic Curie temperature (100 K) indicative of coupling between magnetic and electric orders., The financial support by the Ministerio de Ciencia e Innovacion of the Spanish Government (Grant No. BES-2009-028641 and Project Nos. MAT2011-29269-C03-03, NANOSELECT, MAT2014-56063-C2-2-R, CSD2007-00041, MAT2015-73839-JIN, and IMAGINE CSD2009-00013) and Generalitat de Catalunya (2014 SGR 734) is acknowledged. E.C. would like to thank the National Science Centre of Poland under the PRELUDIUM (UMO-2015/17/N/ST5/ 01988) for financial support. I.F. acknowledges the financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), and also the Juan de la Cierva–Incorporacion postdoctoral fellowship (IJCI- 2014-19102) from the Spanish Ministry of Economy and Competitiveness of Spanish Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electric-Field-Adjustable Time-Dependent Magnetoelectric Response in Martensitic FeRh Alloy

  • Fina, Ignasi
  • Quintana, Alberto
  • Padilla-Pantoja, Jessica
  • Martí, Xavier
  • Macià, Ferran
  • Sánchez Barrera, Florencio
  • Foerster, Michael
  • Aballe, Lucía
  • Fontcuberta, Josep
  • Sort, Jordi
Steady or dynamic magnetoelectric response, selectable and adjustable by only varying the amplitude of the applied electric field, is found in a multiferroic FeRh/PMN-PT device. In-operando time-dependent structural, ferroelectric, and magnetoelectric characterizations provide evidence that, as in magnetic shape memory martensitic alloys, the observed distinctive magnetoelectric responses are related to the time-dependent relative abundance of antiferromagnetic−ferromagnetic phases in FeRh, unbalanced by voltagecontrolled strain. This flexible magnetoelectric response can be exploited not only for energy-efficient memory operations but also in other applications, where multilevel and/or transient responses are required., Financial support by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015- 73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, MAT2015-64110-C2-2-P, and associated FEDER], the Generalitat de Catalunya (2014-SGR-734, 2014-SGR-1015) and the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement nº 648454) is acknowledged. We also acknowledge support from the EU ERC Advanced Grant No. 268066, from the Ministry of Education of the Czech Republic Grant No. LM2011026, from the Grant Agency of the Czech Republic Grant no. 14-37427. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. Jose Santiso and Jose Manuel Caicedo Roque from Institut Català de Nanociència i Nanotecnologia are acknowledged for valuable collaboration on time-dependent X-ray characterization. We also acknowledge Max Stengel and Umesh Bhaskar for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Isothermal anisotropic magnetoresistance in antiferromagnetic metallic IrMn

  • Galceran, Regina
  • Fina, Ignasi
  • Cisneros Fernández, José
  • Bozzo, Bernat
  • Frontera, Carlos
  • López Mir, Laura
  • Balcells, Lluis
  • Martínez Perea, Benjamín
Galceran, Regina et al., Antiferromagnetic spintronics is an emerging field; antiferromagnets can improve the functionalities of ferromagnets with higher response times, and having the information shielded against external magnetic field. Moreover, a large list of aniferromagnetic semiconductors and metals with Néel temperatures above room temperature exists. In the present manuscript, we persevere in the quest for the limits of how large can anisotropic magnetoresistance be in antiferromagnetic materials with very large spin-orbit coupling. We selected IrMn as a prime example of first-class moment (Mn) and spin-orbit (Ir) combination. Isothermal magnetotransport measurements in an antiferromagnetic-metal(IrMn)/ferromagnetic-insulator thin film bilayer have been performed. The metal/insulator structure with magnetic coupling between both layers allows the measurement of the modulation of the transport properties exclusively in the antiferromagnetic layer. Anisotropic magnetoresistance as large as 0.15% has been found, which is much larger than that for a bare IrMn layer. Interestingly, it has been observed that anisotropic magnetoresistance is strongly influenced by the field cooling conditions, signaling the dependence of the found response on the formation of domains at the magnetic ordering temperature., We acknowledge financial support from the Spanish MINECO (MAT-2015-71664-R, MAT2015-73839-JIN) and FEDER program. We also acknowledge support from the ERC Advanced grant no. 268066, from the Ministry of Education of the Czech Republic Grant No. LM2015087, from the Grant Agency of the Czech Republic Grant no. 14–37427. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). R.G. thanks the Spanish MINECO for the financial support through the FPI program and funding from Marie-Curie-ITN 607904-SPINOGRAPH. I.F. acknowledges the Beatriu de Pinós postdoctoral scholarship (2011 BP-A_2 00014) from AGAUR-Generalitat de Catalunya. B.-G.P. acknowledges support from NRF of Korea funded by the Ministry of Science, ICT & Future Planning (NRF-2014R1A2A1A11051344 and 2015M3D1A1070465). We finally thank Helmholtz-Zentrum Berlin for the allocation of synchrotron radiation beamtime, and Dr. Daniel M. Többens for his kind assistance during data collection., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hidden Magnetic States Emergent Under Electric Field, In A Room Temperature Composite Magnetoelectric Multiferroic

  • Clarkson, J. D.
  • Fina, Ignasi
  • Frontera, Carlos
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
  • Ramesh, Ramamoorthy
Clarkson, J. D. et al., The ability to control a magnetic phase with an electric field is of great current interest for a variety of low power electronics in which the magnetic state is used either for information storage or logic operations. Over the past several years, there has been a considerable amount of research on pathways to control the direction of magnetization with an electric field. More recently, an alternative pathway involving the change of the magnetic state (ferromagnet to antiferromagnet) has been proposed. In this paper, we demonstrate electric field control of the Anomalous Hall Transport in a metamagnetic FeRh thin film, accompanying an antiferromagnet (AFM) to ferromagnet (FM) phase transition. This approach provides us with a pathway to “hide” or “reveal” a given ferromagnetic region at zero magnetic field. By converting the AFM phase into the FM phase, the stray field, and hence sensitivity to external fields, is decreased or eliminated. Using detailed structural analyses of FeRh films of varying crystalline quality and chemical order, we relate the direct nanoscale origins of this memory effect to site disorder as well as variations of the net magnetic anisotropy of FM nuclei. Our work opens pathways toward a new generation of antiferromagnetic – ferromagnetic interactions for spintronics., Te work at Berkeley was supported in part by FAME, one of six centers of STARnet, a Semiconductor Research Corporation program sponsored by MARCO and DARPA was supported by the SRC-FAME program. Financial support by the Spanish Government (Project MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2017- 85232-R and associated FEDER) and Generalitat de Catalunya (2014 SGR 734) is acknowledged. ICMAB-CSIC authors acknowledge fnancial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness of Spanish Government. XMCD-PEEM experiments were performed at CIRCE beamline at ALBA Synchrotron with the acknowledged collaboration of ALBA staf. Partial fnancial support from the 2014-Consolidator Grant "SPIN-PORICS" (Grant Agreement nº 648454) from the European Research Council is acknowledged. XM acknowledges support from the Grant Agency of the Czech Republic Grant no. 14-37427. Work at ORNL was sponsored by the Laboratory Directed Research and Development (LDRD) Programs of ORNL managed by UT-Battelle, LLC. Work at CSUN was supported by NSF under Grant No. 1205734, NSF Partnerships for Research and Education in Materials (PREM), and by NSF under Grant No. 1160504 NSF Nanosystems Engineering Research Center for Translational Applications of Nanoscale Multiferroic Systems (TANMS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring Lattice Strain and Ferroelectric Polarization of Epitaxial BaTiO3 Thin Films on Si(001)

  • Lyu, Jike
  • Fina, Ignasi
  • Solanas, Raul
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Ferroelectric BaTiO3 films with large polarization have been integrated with Si(001) by pulsed laser deposition. High quality c-oriented epitaxial films are obtained in a substrate temperature range of about 300 °C wide. The deposition temperature critically affects the growth kinetics and thermodynamics balance, resulting on a high impact in the strain of the BaTiO3 polar axis, which can exceed 2% in films thicker than 100 nm. The ferroelectric polarization scales with the strain and therefore deposition temperature can be used as an efficient tool to tailor ferroelectric polarization. The developed strategy overcomes the main limitations of the conventional strain engineering methodologies based on substrate selection: it can be applied to films on specific substrates including Si(001) and perovskites, and it is not restricted to ultrathin films., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R, MAT2014-56063- C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2014 SGR 734) is acknowledged. IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. JL is financially supported by China Scholarship Council (CSC) with No. 201506080019. JL work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Control of Polar Orientation and Lattice Strain in Epitaxial BaTiO3 Films on Silicon

  • Lyu, Jike
  • Estandía, Saúl
  • Gázquez, Jaume
  • Chisholm, Matthew F.
  • Fina, Ignasi
  • Dix, Nico
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Conventional strain engineering of epitaxial ferroelectric oxide thin films is based on the selection of substrates with suitable lattice parameter. Here we show that the variation of oxygen pressure during pulsed laser deposition is a flexible strain engineering method for epitaxial ferroelectric BaTiO3 films either on perovskite substrates or on Si(001) wafers. This unconventional growth strategy permits continuous tuning of strain up to high levels (ε>0.8%) in films of thickness exceeding of a hundred of nanometers, as well as selecting the polar axis orientation to be either parallel or perpendicular to the substrate surface plane., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER,UE), MAT2014-56063-C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2014 SGR 734) is acknowledged. JL is financially supported by China Scholarship Council (CSC) with No. 201506080019. JL work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. J.G. acknowledges the RyC contract (RC-2012–11709). Electron microscopy observations at ORNL were supported by the U.S. Department of Energy (DOE), Basic Energy Sciences (BES), Materials Sciences and Engineering Division. Authors acknowledge the ICTS-CNME for offering access to their instruments and expertise. S.E. acknowledges the Spanish Ministry of Economy and Competitiveness for his PhD contract (SEV-2015-0496-16-3)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Selectable texture in epitaxial ferroelectric BaTiO3 films integrated with silicon

  • Lyu, Jike
  • Fina, Ignasi
  • Solanas, Raul
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Ferroelectric BaTiO3 films have been epitaxially grown by pulsed laser deposition on buffered Si substrates. We show that BaTiO3 films texture is selectable by appropriate choice of Si wafer orientation and buffer layers. BaTiO3 films having (00l), (l0l) or (l0l)/(l00) texture present very flat surface, low current leakage, and sizeable ferroelectric polarization. The films, integrated on silicon platforms, offer opportunities to exploit anisotropic optic and dielectric properties of ferroelectric BaTiO3., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER,UE), MAT2014-56063-C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. JL is financially supported by China Scholarship Council (CSC) with No. 201506080019. JL work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Control of the Polarization of Ferroelectric Capacitors by the Concurrent Action of Light and Adsorbates

  • Fanmao, Liu
  • Fina, Ignasi
  • Sauthier, Guillaume
  • Sánchez Barrera, Florencio
  • Rappe, Andrew M.
  • Fontcuberta, Josep
Ferroelectric perovskites hold promise of enhanced photovoltaic efficiency and photocatalytic activity. Consequently, the photoresponse of oxide ferroelectric thin films is an active field of research. In electrode/ferroelectric/ electrode devices, internal charge in the ferroelectric, free charge in the electrodes, and buried adsorbates at interfaces combine to screen the ferroelectric polarization and to stabilize the polar state. Under illumination, photoinduced carriers and photodissociated adsorbates may disrupt the screening equilibrium, modifying the switchable polarization and altering its expected benefits. Here, we explore the photoresponse of BaTiO3 thin films in a capacitor geometry, focusing on the effects of visible illumination on the remanent polarization. By combining ferroelectric and X-ray photoelectron spectroscopy, we discover that photoreaction of charge-screening H2O-derived adsorbates at the buried metal−ferroelectric Pt/BaTiO3 interface plays an unexpected pivotal role, enabling a substantial modulation (up to 75%) of the switchable remanent polarization by light. These findings illustrate that the synergy between photochemistry and photovoltaic activity at the surface of a ferroelectric material can be exploited to tune photoferroelectric activity, This work is supported by the Spanish government (MAT2014-56063-C2-1-R, MAT2017-85232-R (AEI/FEDER,UE), and MAT2015-73839-JIN and associated FEDER) and by the Catalan government (2017 SGR 1377). ICMABCSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). I.F. acknowledges Juan de la Cierva Incorporació n postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. F.L. is financially supported by China Scholarship Council (CSC) with no. 201306020016. A.M.R. acknowledges support from the Office of Naval Research under grant N00014-17-1- 2574. The ICN2 is funded by the CERCA programme/ Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reversible and magnetically unassisted voltage-driven switching of magnetization in FeRh/PMN-PT

  • Fina, Ignasi
  • Quintana, Alberto
  • Martí, Xavier
  • Sánchez Barrera, Florencio
  • Foerster, Michael
  • Aballe, Lucía
  • Sort, Jordi
  • Fontcuberta, Josep
Reversible control of magnetization by electric fields without assistance from a subsidiary magnetic field or electric current could help reduce the power consumption in spintronic devices. When increasing temperature above room temperature, FeRh displays an uncommon antiferromagnetic to ferromagnetic phase transition linked to a unit cell volume expansion. Thus, using the strain exerted by an adjacent piezoelectric layer, the relative amount of antiferromagnetic and ferromagnetic regions can be tuned by an electric field applied to the piezoelectric material. Indeed, large variations in the saturation magnetization have been observed when straining FeRh films grown on suitable piezoelectric substrates. In view of its applications, the variations in the remanent magnetization rather than those of the saturation magnetization are the most relevant. Here, we show that in the absence of any bias external magnetic field, permanent and reversible magnetization changes as high as 34% can be induced by an electric field, which remain after this has been zeroed. Bulk and local magnetoelectric characterization reveals that the fundamental reason for the large magnetoelectric response observed at remanence is the expansion (rather than the nucleation) of ferromagnetic nanoregions., Financial support by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R, MAT2015-64110-C2-2-R and MAT2017-86357-C3-1-R, and associated FEDER], the Generalitat de Catalunya (2017-SGR-1377, 2017-SGR-292), and the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement nº 648454) is acknowledged. We also acknowledge support from EU ERC Advanced Grant No. 268066, from the Ministry of Education of the Czech Republic Grant No. LM2011026, from the Grant Agency of the Czech Republic Grant no. 14-37427. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV- 2015-0496). I.F. acknowledges Ramon y Cajal contract RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Epitaxial Integration on Si(001) of Ferroelectric Hf0.5Zr0.5O2 Capacitors with High Retention and Endurance

  • Lyu, Jike
  • Fina, Ignasi
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Epitaxial ferroelectric Hf0.5Zr0.5O2 films have been successfully integrated in a capacitor heterostructure on Si(001). The orthorhombic Hf0.5Zr0.5O2 phase, [111] out-of-plane oriented, is stabilized in the films. The films present high remnant polarization Pr close to 20 μC/cm2, rivaling with equivalent epitaxial films on single crystalline oxide substrates. Retention time is longer than 10 years for a writing field of around 5 MV/cm, and the capacitors show endurance up to 109 cycles for a writing voltage of around 4 MV/cm. It is found that the formation of the orthorhombic ferroelectric phase depends critically on the bottom electrode, being achieved on La0.67Sr0.33MnO3 but not on LaNiO3. The demonstration of excellent ferroelectric properties in epitaxial films of Hf0.5Zr0.5O2 on Si(001) is relevant toward fabrication of devices that require homogeneity in the nanometer scale, as well as for better understanding of the intrinsic properties of this promising ferroelectric oxide., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU), MAT2014-56063-C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges RyC contract RYC-2017-22531. J.L. is financially supported by China Scholarship Council (CSC) with No. 201506080019. J.L. work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Growth Window of Ferroelectric Epitaxial Hf0.5Zr0.5O2 Thin Films

  • Lyu, Jike
  • Fina, Ignasi
  • Solanas, Raul
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
The metastable orthorhombic phase of hafnia is generally obtained in polycrystalline films, whereas in epitaxial films, its formation has been much less investigated. We have grown Hf0.5Zr0.5O2 films by pulsed laser deposition, and the growth window (temperature and oxygen pressure during deposition and film thickness) for epitaxial stabilization of the ferroelectric phase is mapped. The remnant ferroelectric polarization, up to ∼24 μC/cm2, depends on the amount of orthorhombic phase and interplanar spacing and increases with temperature and pressure for a fixed film thickness. The leakage current decreases with an increase in thickness or temperature, or when decreasing oxygen pressure. The coercive electric field (EC) depends on thickness (t) according to the EC – t–2/3 scaling, which is observed for the first time in ferroelectric hafnia, and the scaling extends to thicknesses down to around 5 nm. The proven ability to tailor the functional properties of high-quality epitaxial ferroelectric Hf0.5Zr0.5O2 films paves the way toward understanding their ferroelectric properties and prototyping devices., Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU), MAT2014-56063-C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges Ramón y Cajal Contract RYC-2017-22531. J.L. is financially supported by the China Scholarship Council (CSC, 201506080019). The work of J.L. has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Asymmetric Resistive Switching Dynamics in BaTiO3 Tunnel Junctions

  • Mengdi, Qian
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
The resistive switching associated with polarization reversal is studied in detail in ferroelectric BaTiO3 tunnel junctions, with focus on the dynamics of the ferroelectric domain switching. It is observed that the transition between the high‐resistance state (HRS) and the low‐resistance state (LRS) is largely asymmetric being smooth from LRS to HRS, but proceeds via avalanches in the HRS‐to‐LRS transitions. It is shown that this distinct behavior is related to the presence of an imprint field in the junction and has important consequences on the junction's performance., Financial support from the Spanish Government, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and the MAT2017‐85232‐R, MAT2014‐56063‐C2‐1‐R, and MAT2015‐73839‐JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) was acknowledged. M.Q. was financially supported by China Scholarship Council (CSC) with Grant No. 201406890019. M.Q. work was done as a part of her Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. I.F. acknowledges Ramon y Cajal contract RYC‐2017‐22531. The authors thank Dr. Neus Domingo for the use of PFM equipment., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synergetic Electronic and Ionic Contributions to Electroresistance in Ferroelectric Capacitors

  • Mengdi, Qian
  • Fina, Ignasi
  • Cervo Sulzbach, Milena
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
Advanced use of ferroelectric capacitors in data storage and computing relies on the control of their electrical resistance (electroresistance, ER) by the change of the electrostatic potential profile across the capacitor occurring upon electric field–driven polarization switching. Here it is reported the observation that BaTiO3‐based capacitors, sandwiched between Pt and La2/3Sr1/3MnO3 electrodes, display a large ER, whose magnitude (near 104% at room temperature) and sign (ER > 0, ER < 0) are determined by the writing pulse duration and temperature. Temperature‐dependent measurements have been instrumental to obtain evidence of the presence of a thermally activated process coexisting with the electronic changes produced by ferroelectric polarization switching, both contributing to ER. Detailed analysis allows concluding that the thermally activated process can be attributed to field‐assisted ionic motion. It is argued that the relative balance between purely electronic and ionic diffusion processes modulate the height of the interfacial Schottky barriers and, consequently, are responsible for the observed variations of magnitude and sign of ER., Financial support from the Spanish Government, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and the MAT2017‐85232‐R, and MAT2015‐73839‐JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. M.Q. was financially supported by China Scholarship Council (CSC) with No. 201406890019. M.Q.'s work has been done as a part of her Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. I.F. acknowledges RyC contract RYC‐2017‐22531. The project that gave rise to these results received the support of a fellowship from “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/IN17/11620051., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Complementary Resistive Switching Using Metal–Ferroelectric–Metal Tunnel Junctions

  • Mengdi, Qian
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
Complementary resistive switching (CRS) devices are receiving attention because they can potentially solve the current‐sneak and current‐leakage problems of memory arrays based on resistive switching (RS) elements. It is shown here that a simple anti‐serial connection of two ferroelectric tunnel junctions, based on BaTiO3, with symmetric top metallic electrodes and a common, floating bottom nanometric film electrode, constitute a CRS memory element. It allows nonvolatile storage of binary states (“1” = “HRS+LRS” and “0” = “LRS+HRS”), where HRS (LRS) indicate the high (low) resistance state of each ferroelectric tunnel junction. Remarkably, these states have an identical and large resistance in the remanent state, characteristic of CRS. Here, protocols for writing information are reported and it is shown that non‐destructive or destructive reading schemes can be chosen by selecting the appropriate reading voltage amplitude. Moreover, this dual‐tunnel device has a significantly lower power consumption than a single ferroelectric tunnel junction to perform writing/reading functions, as is experimentally demonstrated. These findings illustrate that the recent impressive development of ferroelectric tunnel junctions can be further exploited to contribute to solving critical bottlenecks in data storage and logic functions implemented using RS elements., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and the MAT2017‐85232‐R (AEI/FEDER, EU), MAT2014‐56063‐C2‐1‐R, and MAT2015‐73839‐JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges Ramon y Cajal contract RYC‐2017‐22531. M.Q. was financially supported by China Scholarship Council (CSC) with No. 201406890019. M.Q.'s work was done as a part of the Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High Carrier Mobility, Electrical Conductivity, and Optical Transmittance in Epitaxial SrVO3 Thin Films

  • Mirjolet, Mathieu
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
The urgent need for more performant transparent conducting electrodes is stimulating intensive research on oxide thin films based on early transition metals (e.g., V, Nb, Mo, etc.), where it is expected that the partially occupied (i.e., nd1, nd2…) conduction band will give rise to metallic conductivity. Growing thin films of these oxides typically requires an extremely low oxygen pressure. However, in growth methods involving hyperthermal kinetics (such as pulsed laser deposition), this may have severe detrimental effects on the electrical and optical properties of the film. Here, it is shown that the use of a nonreactive gas during a pulsed laser deposition process allows epitaxial SrVO3 films to be obtained with low room temperature resistivity (ρ ≈ 31 μΩ cm), large carrier mobility (μ ≈ 8.3 cm2 V−1 s−1), and large residual resistivity ratio (RRR ≈ 11.5), while improving optical transparency in the visible range. It is argued that the success of this growth strategy relies on the modulation of energetics of plasma species and a concomitant reduction of defects in the films. These findings may find applications in other oxide‐based thin film technologies (i.e., ferroelectric tunnel memories, etc.) where growth‐induced point effects may compromise functionality., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and the MAT2017‐85232‐R (AEI/FEDER, EU), MAT2014‐56063‐C2‐1‐R, and MAT2015‐73839‐JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. M.M. was financially supported by the Spanish Ministry of Science, Innovation and Universities and this work has been done as a part of his Ph.D. program in Physics at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards Oxide Electronics: a Roadmap

  • Coll, Mariona
  • Fontcuberta, Josep
  • Althammer, M.
  • Bibes, Manuel
  • Boschker, H.
  • Calleja Lázaro, Alberto
  • Cheng, G.
  • Cuoco, M.
  • Dittmann, Regina
  • Dkhil, B.
  • El Baggari, I.
  • Fanciulli, M.
  • Fina, Ignasi
  • Fortunato, E.
  • Frontera, Carlos
  • Fujita, S.
  • García, V.
  • Goennenwein, S.T.B.
  • Granqvist, C.-G.
  • Grollier, J.
  • Gross, R.
  • Hagfeldt, A.
  • Herranz, Gervasi
  • Hono, K.
  • Houwman, E.
  • Huijben, M.
  • Kalaboukhov, A.
  • Keeble, D.J.
  • Koster, G.
  • Kourkoutis, L.F.
  • Levy, J.
  • Lira-Cantú, Mónica
  • MacManus-Driscoll, J.L.
  • Mannhart, Jochen
  • Martins, R.
  • Menzel, S.
  • Mikolajick, T.
  • Napari, M.
  • Nguyen, M.D.
  • Niklasson, G.
  • Paillard, C.
  • Panigrahi, S.
  • Rijnders, G.
  • Sánchez Barrera, Florencio
  • Sanchis, P.
  • Sanna, S.
  • Schlom, Darrell G.
  • Schroeder, U.
  • Shen, K.M.
  • Siemon, A.
  • Spreitzer, M.
  • Sukegawa, H.
  • Tamayo, R. R.
  • Brink, J. van den
  • Pryds, N.
  • Miletto Granozio, F.
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore’s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics., The authors acknowledge financial support from the Netherlands Organization for Scientific Research (NWO). We acknowledge fruitful interactions with our many collaborators in the realm of artificial quantum materials, especially the groups of J.C. Séamus Davis, Craig J. Fennie, Eun-Ah Kim, Lena F. Kourkoutis, and David A. Muller. This work was supported by the National Science Foundation (Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM)) under Cooperative Agreement No. DMR-1539918. Financial support from the Spanish Ministry of Economy and Competitiveness (SEV-2015-0496, MAT2014-56063-C2-1-R, and MAT2017-85232-R), from Generalitat de Catalunya (2014 SGR 734), and from Slovenian Research Agency (P2-0091 and J2-6759) is acknowledged. The authors acknowledge funding from the EPSRC grant EP/ P027032/1. Prof. O. Nilsen is acknowledged for valuable discussions on the current status of ALD perovskites. Author thanks fruitful discussions with Dr. J. Santiso. Financial support from the Spanish Ministry of Economy and Competitiveness through the ''Severo Ochoa" Programme for Centres of Excellence in R&D (SEV-2015-0496), and projects MAT2015-71664-R and MAT2015- 67593-P is acknowledged. This work was supported by PARADIM, a National Science Foundation Materials Innovation Platform (Grant DMR-1539918), and by the Air Force Office of Scientific Research (Award number FA 9550-16-1-0305). Funding from the DFG (German Science Foundation) within the collaborative research center SFB 917 'Nanoswitches' and the W2/ W3 program of the Helmholtz association is gratefully acknowledged. We furthermore acknowledge funding by the ToBE CoST action (MP1308). We acknowledge financial support from the ERC Consolidator grant ‘‘MINT” (contract number n° 615759) and the ANR project ‘‘FERROMON”. This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agreement 732642 (ULPEC project). This work is supported by a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Labex NanoSaclay, reference: ANR-10-LABX-0035). This work was supported in part by the EFRE fund of the European Commission, by the Free State of Saxony (Germany), and by funding of the Deutsche Forschungsgemeinschaft (DFG project: Inferox). This work was supported in parts by the Deutsche Forschungsge-meinschaft (DFG) under Grant SFB 917 ''Nanoswitches" and the COST Action MP1308 ''TO-BE (Towards Oxide-Based Electronics)". This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agree-ment 732642 (ULPEC project). We thank M. Belmoubarik and J. Uzuhashi for their technical assistance for Fig. 36. We acknowledge support from the ImPACT Program of Council for Science, Technology and Innovation, Japan. Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA. We thank the financial support from the SNSF NRP70 ‘‘Energy Turnaround” and GRAPHENE project supported by the European Commission Seventh Framework Programme under contract 604391 is gratefully acknowledged. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295; for the grant ENE2016-79282-C5-2-R and the OrgEnergy Excelence NetworkCTQ2016-81911-REDT. To the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l’Energia (Xarmae). To the CERCA Pro-gramme/Generalitat de Catalunya and to the European COST Action StableNextSol project MP1307. The authors would like to acknowledge the financial support from ACCIO-Generalitat de Catalunya and the European Union for the 3D-PHOTOXIDES ERA-NET MANUNET II and from IV Fondo de Emprendedores of Fundación Repsol for the SOLAR OXIDES project. The authors would also thank Mr. Andrés Gómez from Institut de Ciència de Materials de Barcelona (ICMAB) for the pc-AFM measure-ments and Mr. Alex Hernández from Institut de Recerca en Energia de Catalunya (IREC) for the sputtering and valuable guidance. We would like to acknowledge the financial support granted by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, and associated FEDER], I.F. acknowledges Ramon y Cajal contract RYC-2017-22531, the Generalitat de Catalunya (2014-SGR-734). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). C.P. and B.D. acknowledge a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Grant No. ANR-10-LABX-0035, Labex NanoSaclay). The authors would like to acknowledge L. Pereira and P. Bar-quinha for fruitful discussions during the manuscript preparation. We acknowledge the funding from Portuguese Foundation for Science and Technology, Reference UID/CTM/50025/2013 and FEDER funds through the COMPETE 2020 Programme under the project number POCI-01-0145-FEDER-007688. Part of this work is partially financed from European Community H2020 program under grant agreements No. 665046 (project Symbiotic) and No. 644631 (project Roll-Out). Several of the recent advances in electrochromic and ther-mochromic materials, reported above, were reached with financial support received from the European Research Council under the European Community’s Seventh Framework Program (FP2007– 2013)/ERC Grant Agreement No. 267234 (‘‘GRINDOOR”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strain and voltage control of magnetic and electric properties of FeRh films

  • Fina, Ignasi
  • Fontcuberta, Josep
FeRh based alloys may display an uncommon transition from a ferromagnetic to an antiferromagnetic state upon cooling. The transition takes place roughly above room temperature and it can be sensitively modulated by composition and external parameters, including pressure and strain. Consequently, thin films of FeRh have received attention for applications in spintronics, antiferromagnetic spintronics and sensing. Interestingly, the extreme sensitivity of its properties to strain has created expectations for energy friendly voltage-control of the magnetic state of FeRh, with a number of potential applications at the horizon. Here, after summarizing the current understanding of strain effects on the magnetic properties of FeRh thin films, we review achievements on exploiting piezoelectric substrates for in-operando tuning of their magneto-electric properties. We end with a brief summary and an outlook for future initiatives., Financial support from the Spanish Ministry of Economy, Competiveness and Universities, through the 'Severo Ochoa' Programme for Centres of Excellence in R&D (SEV-2015-0496), the MAT2015-73839-JIN (MINECO/FEDER, UE) and the MAT2017-85232-R (AEI/FEDER, EU) and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. IF acknowledges Ramón y Cajal contract RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct reversible magnetoelectric coupling in ferroelectric/ferromagnetic structure controlled by series resistance engineering

  • González Casal, Sergio
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
Achieving large magnetoelectric coupling is of interest for memory and communication applications. In multiferroic hybrid structures (combining ferroelectric and magnetic materials) in the presence of a magnetoelectric coupling, the ferroelectric properties can be modulated by a magnetic field. This is called the direct magnetoelectric effect. Measuring the ferroelectric properties in multiferroic materials most commonly requires using metallic electrodes that sandwich the ferroelectric material. In the present work, we use the series resistance introduced by the metallic electrode (La2/3Sr1/3MnO3) to manipulate one relevant ferroelectric parameter, i.e., the coercive voltage, of an adjacent ferroelectric layer (BaTiO3) by a magnetic field. We will show that the variations are fully reversible and more apparent at high frequencies; thus, of particular interest for applications, where high commutation rates are required., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU), MAT2015-73839-JIN (AEI/FEDER, EU) projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges RyC contract RYC-2017-22531. SG work has been done as a part of his Master of Nanoscience and Nanotechnology thesis program of Universitat de Barcelona in Applied Physics Department at Universitat de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unraveling Ferroelectric Polarization and Ionic Contributions to Electroresistance in Epitaxial Hf0.5Zr0.5O2 Tunnel Junctions

  • Cervo Sulzbach, Milena
  • Estandía, Saúl
  • Long, Xiao
  • Lyu, Jike
  • Dix, Nico
  • Gázquez, Jaume
  • Chisholm, Matthew F.
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
Tunnel devices based on ferroelectric Hf0.5Zr0.5O2 (HZO) barriers hold great promises for emerging data storage and computing technologies. The resistance state of the device can be changed through use of a suitable writing voltage. However, the microscopic mechanisms leading to the resistance change are an intricate interplay between ferroelectric polarization controlled barrier properties and defect‐related transport mechanisms. The fundamental role of the microstructure of HZO films determining the balance between those contributions is demonstrated. The HZO film presents coherent or incoherent grain boundaries, associated to the coexistance of monoclinic and orthorhombic phases, which are dictated by the mismatch with the substrates for epitaxial growth. These grain boundaries are the toggle that allows to obtain either large (up to ≈450%) and fully reversible genuine polarization controlled electroresistance when only the orthorhombic phase is present or an irreversible and extremely large (≈103–105%) electroresistance when both phases coexist., Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and the MAT2017‐85232‐R (AEI/FEDER, EU), and MAT2015‐73839‐JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. M.C.S. acknowledges fellowship from “la Caixa Foundation” (ID 100010434; the fellowship code is LCF/BQ/IN17/11620051). I.F. and J.G. acknowledge Ramón y Cajal contracts RYC‐2017‐22531 and RYC‐2012‐11709, respectively. S.E. acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his Ph.D. contract (SEV‐2015‐0496‐16‐3) and its cofunding by the ESF. J.L. and X.L. are financially supported by China Scholarship Council (CSC) with Nos. 201506080019 and 201806100207, respectively. M.C. aknowledges financial support from U.S. Dept. of Energy. M.C.S. work has been done as a part of her Ph.D. in physics at Universitat Autònoma de Barcelona. S.E. and J.L. work has been done as a part of their Ph.D. in materials science at Universitat Autònoma de Barcelona. The authors acknowledge the ICTS‐CNME for offering access to their instruments and expertise. The electron microscopy performed at ORNL was supported by the Materials Sciences and Engineering Division of Basic Energy Sciences of the Office of Science of the U.S. Department of Energy., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Disclosing odd symmetry, strain driven magnetic response of Co on Pt/PMN-PT (0 1 1)

  • Foerster, Michael
  • Fina, Ignasi
  • Finizio, Simone
  • Casals, Blai
  • Mandziak, Anna
  • Fauth, François
  • Aballe, Lucía
An odd-symmetry magnetic response of multiferroic composites comprising ultrathin Co layers on Pt electrodes on [Pb(Mg0.33Nb0.67)O3](1−x)[PbTiO3] x (PMN-PT) (0 1 1) piezoelectric substrates is observed upon electrical poling of the PMN-PT substrates: the magnetic easy axis of the Co rotates by 90° in-plane between oppositely poled ferroelectric states, mimicking the signature of a surface polarization charge driven effect, which however can be excluded from the presence of the thick Pt interlayer. The origin for this unexpected behavior is as an odd symmetry piezoelectric response of the PMN-PT substrate, as indicated by x-ray diffraction with applied poling, in combination with conventional magnetoelastic coupling. Ferroelectric characterization reveals corresponding features, possibly related to an unswitchable polarization component., This work was supported by the Spanish Ministerio de Economía y Competitividad through projects MAT2015-64110-C2-1-P, MAT2015-64110-C2-2-P, MAT2017-85232-R (AEI/FEDER, EU), MAT2015-73839-JIN(AEI/FEDER, EU), through the "Severo Ochoa" Programme for Centres of Excellence in R&D (SEV-2015-0496); by the ALBA Synchrotron Light Facility through projects IH2015PEEM and IH2017PEEM; and by the Generalitat de Catalunya through project 2017 SGR 1377. IF acknowledges Ramon y Cajal contract RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering Ferroelectric Hf0.5Zr0.5O2 Thin Films by Epitaxial Stress

  • Estandía, Saúl
  • Dix, Nico
  • Gázquez, Jaume
  • Fina, Ignasi
  • Lyu, Jike
  • Chisholm, Matthew F.
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
The critical impact of epitaxial stress on the stabilization of the ferroelectric orthorhombic phase of hafnia is proved. Epitaxial bilayers of Hf0.5Zr0.5O2 (HZO) and La0.67Sr0.33MnO3 (LSMO) electrodes were grown on a set of single crystalline oxide (001)-oriented (cubic or pseudocubic setting) substrates with a lattice parameter in the 3.71–4.21 Å range. The lattice strain of the LSMO electrode, determined by the lattice mismatch with the substrate, is critical in the stabilization of the orthorhombic phase of HZO. On tensilely strained LSMO electrodes, most of the HZO film is orthorhombic, whereas the monoclinic phase is favored when LSMO is relaxed or compressively strained. Therefore, the HZO films on TbScO3 and GdScO3 substrates present substantially enhanced ferroelectric polarization in comparison to films on other substrates, including the commonly used SrTiO3. The capability of having epitaxial doped HfO2 films with controlled phase and polarization is of major interest for a better understanding of the ferroelectric properties and paves the way for fabrication of ferroelectric devices based on nanometric HfO2 films., Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015- 0496), and the MAT2017-85232-R (AEI/FEDER, EU) and MAT2015-73839-JIN projects as well as the Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. and J.G. acknowledge Ramon y Cajal contracts RYC-2017-22531 and ́ RYC-2012-11709, respectively. S.E. acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his PhD contract (SEV-2015-0496-16-3) and its cofunding by the ESF. J.L. is financially supported by the China Scholarship Council (CSC) with No. 201506080019. S.E. and J.L.’s work has been done as a part of their Ph.D. program in Materials Science at the Universitat Autonoma de Barcelona. The ̀ electron microscopy performed at ORNL was supported by the Materials Sciences and Engineering Division of Basic Energy Sciences of the Office of Science of the U.S. Department of Energy., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced ferroelectricity in epitaxial Hf0.5Zr0.5O2 thin films integrated with Si(001) using SrTiO3 templates

  • Lyu, Jike
  • Fina, Ignasi
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Estandía, Saúl
  • Gázquez, Jaume
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
SrTiO3 templates have been used to integrate epitaxial bilayers of ferroelectric Hf0.5Zr0.5O2 and La2/3Sr1/3MnO3 bottom electrodes on Si(001). The Hf0.5Zr0.5O2 films show enhanced properties in comparison to equivalent films on SrTiO3(001) single crystalline substrates. The films, thinner than 10 nm, have a very high remnant polarization of 34 lC/cm2. Hf0.5Zr0.5O2 capacitors at an operating voltage of 4V present a long retention time well beyond 10 years and high endurance against fatigue up to 109 cycles. The robust ferroelectric properties displayed by the epitaxial Hf0.5Zr0.5O2 films on Si(001) using SrTiO3 templates pave the way for the monolithic integration on silicon of emerging memory devices based on epitaxial HfO2., Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (No. SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU) and MAT2015-73839-JIN projects and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges Ramón y Cajal Contract No. RYC-2017-22531. J.L. is financially supported by the China Scholarship Council (CSC) with No. 201506080019. S.E. acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his Ph.D. Contract (No. SEV-2015-0496-16-3) and its cofunding by the ESF. The work of J.L. and S.E. has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. INL authors acknowledge the financial support from the European Commission through the Project TIPS (No. H2020-ICT-02-2014-1-644453) and from the French national research agency (ANR) through the projects DIAMWAFEL (No. ANR-15-CE08-0034), LILIT (No. ANR-16-CE24-0022), and MITO (No. ANR-17-CE05-0018). They are also grateful to the joint laboratory INL-RIBER and P. Regreny, C. Botella, and J. B. Goure for the MBE technical support on the Nanolyon technological platform., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Disentangling Highly Asymmetric Magnetoelectric Effects in Engineered Multiferroic Heterostructures

  • Menéndez, Enric
  • Sireus, Veronica
  • Quintana, Alberto
  • Fina, Ignasi
  • Casals, Blai
  • Cichelero, Rafael
  • Kataja, Mikko
  • Stengel, Massimiliano
  • Herranz, Gervasi
  • Catalán, Gustau
  • Baró, María Dolors
  • Suriñach, Santiago
  • Sort, Jordi
One of the main strategies to control magnetism by voltage is the use of magnetostrictive-piezoelectric hybrid materials, such as ferromagnetic-ferroelectric heterostructures. When such heterostructures are subjected to an electric field, piezostrain-mediated effects, electronic charging, and voltage-driven oxygen migration (magnetoionics) may simultaneously occur, making the interpretation of the magnetoelectric effects not straightforward and often leading to misconceptions. Typically, the strain-mediated magnetoelectric response is symmetric with respect to the sign of the applied voltage because the induced strain (and variations in the magnetization) depends on the square of the ferroelectric polarization. Conversely, asymmetric responses can be obtained from electronic charging and voltage-driven oxygen migration. By engineering a ferromagnetic-ferroelectric hybrid consisting of a magnetically soft 50-nm thick Fe 75 Al 25 (at. %) thin film on top of a 〈110〉-oriented Pb ( Mg 1 / 3 Nb 2 / 3 ) O 3 - 32 Pb Ti O 3 ferroelectric crystal, a highly asymmetric magnetoelectric response is obtained and the aforementioned magnetoelectric effects can be disentangled. Specifically, the large thickness of the Fe 75 Al 25 layer allows dismissing any possible charge accumulation effect, whereas no evidence of magnetoionics is observed experimentally, as expected from the high resistance to oxidation of Fe 75 Al 25 , leaving strain as the only mechanism to modulate the asymmetric magnetoelectric response. The origin of this asymmetric strain-induced magnetoelectric effect arises from the asymmetry of the polarization reversal in the particular crystallographic orientation of the ferroelectric substrate. These results are important to optimize the performance of artificial multiferroic heterostructures., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Band gap tuning of solution-processed ferroelectric perovskite BiFe1-xCoxO3 thin films

  • Machado, Pamela
  • Scigaj, Mateusz
  • Gázquez, Jaume
  • Rueda, Estel
  • Sánchez-Díaz, A.
  • Fina, Ignasi
  • Gibert Roca, Martí
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Campoy Quiles, Mariano
  • Coll, Mariona
Ferroelectric perovskite oxides are emerging as a promising photoactive layer for photovoltaic applications because of their very high stability and their alternative ferroelectricity-related mechanism for solar energy conversion that could lead to extraordinarily high efficiencies. One of the biggest challenges so far is to reduce their band gap toward the visible region while simultaneously retaining ferroelectricity. To address these two issues, herein an elemental composition engineering of BiFeO3 is performed by substituting Fe by Co cations, as a means to tune the characteristics of the transition metal–oxygen bond. We demonstrate by solution processing the formation of epitaxial, pure phase, and stable BiFe1–xCoxO3 thin films for x ≤ 0.3 and film thickness up to 100 nm. Importantly, the band gap can be tuned from 2.7 to 2.3 eV upon cobalt substitution while simultaneously enhancing ferroelectricity. As a proof of concept, nonoptimized vertical devices have been fabricated and, reassuringly, the electrical photoresponse in the visible region of the Co-substituted phase is improved with respect to the unsubstituted oxide, This research was supported by the Spanish MINECO (“Severo Ochoa” Programme for Centres of Excellence in R&D SEV-2015-0496 and FIP-NANOSOLE-2016, MAT2017-83169-R, MAT2014-51778-C2-1-R, MAT2015-70850-P, MAT2017-85232-R (AEI/FEDER, EU)), the Generalitat de Catalunya (2017-SGR-1519, 2017 SGR-1377), the European Research Council-ERC (FOREMAT under grant agreement no. 648901), and “L’Oreal UNESCO For Women in Science”. M.C., J.G., and I.F. acknowledge RyC contracts (2013-12448, 2012-11709, and RYC-2017-22531). I.F. is grateful to MINECO for MAT2015-73839-JIN project. The HRTEM microscopy work was conducted at the Center for Nanophase Materials Sciences at Oak Ridge National Laboratory, which is a DOE Office of Science User Facility.We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Domain-Matching Epitaxy of Ferroelectric Hf0.5Zr0.5O2(111) on La2/3Sr1/3MnO3(001)

  • Estandía, Saúl
  • Dix, Nico
  • Chisholm, Matthew F.
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Epitaxial ferroelectric HfO2 films are the most suitable to investigate intrinsic properties of the material and for prototyping emerging devices. Ferroelectric Hf0.5Zr0.5O2(111) films were epitaxially stabilized on La2/3Sr1/3MnO3(001) electrodes. This epitaxy, considering the symmetry dissimilarity and the huge lattice mismatch, is not compatible with conventional mechanisms of epitaxy. To gain insight into the epitaxy mechanism, scanning transmission electron microscopy characterization of the interface was performed, revealing arrays of dislocations with short periodicities. These observed periodicities agree with those expected for domain matching epitaxy, indicating that this unconventional mechanism could be the prevailing factor in the stabilization of ferroelectric Hf0.5Zr0.5O2 with (111) orientation in the epitaxial Hf0.5Zr0.5O2(111)/La2/3Sr1/3MnO3(001) heterostructure., Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2015-73839-JIN (MINECO/FEDER, EU) and MAT2017-85232-R (AEI/FEDER, EU) projects, and from Generalitat de Catalunya (2017 SGR 1377), is acknowledged. I.F. acknowledges Ramón y Cajal Contract No. RYC-2017-22531. S.E. acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his Ph.D. contract (SEV-2015-0496-16-3) and its cofunding by the ESF. S.E.’s work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. The electron microscopy performed at ORNL was supported by the Materials Sciences and Engineering Division of Basic Energy Sciences of the Office of Science of the U.S. Department of Energy. We also thank J. Gázquez for his assistance with the STEM characterization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High polarization, endurance and retention in sub-5 nm Hf0.5Zr0.5O2 films

  • Lyu, Jike
  • Song, Tingfeng
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Ferroelectric HfO2 is a promising material for new memory devices, but significant improvement of important properties is necessary to reach applications. However, precedent literature shows that a dilemma between polarization, endurance and retention exists. Since all these properties should be simultaneously high, overcoming this issue is of the highest relevance. Here, we demonstrate that high crystalline quality sub-5 nm Hf0.5Zr0.5O2 capacitors, integrated epitaxially with Si(001), present combined high polarization (2Pr of 27 µC/cm2 in the pristine state), endurance (2Pr > 6 µC/cm2 after 1011 cycles) and retention (2Pr > 12 µC/cm2 extrapolated at 10 years) using same poling conditions (2.5 V). This achievement is demonstrated in films thinner than 5 nm, thus opening bright possibilities in ferroelectric tunnel junctions and other devices., Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU), and MAT2015- 73839-JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. IF acknowledges Ramón y Cajal contract RYC-2017-22531. JL and TS are financially supported by China Scholarship Council (CSC) with No. 201506080019 and 201807000104, respectively. JL and TS work has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fatigue and retention in the growth window of ferroelectric Hf0.5Zr0.5O2 thin films

  • Lyu, Jike
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
The growth window of epitaxial Hf0.5Zr0.5O2 is established taking into account the main ferroelectric properties that films have to present simultaneously: high remanent polarization, low fatigue, and long retention. Defects in the film and imprint field depend on deposition temperature and oxygen pressure, with an impact on fatigue and retention, respectively. Fatigue increases with substrate temperature and pressure, and retention is short if low temperature is used. The growth window of epitaxial stabilization of ferroelectric Hf0.5Zr0.5O2 is narrower when all major ferroelectric properties (remanence, endurance, and retention) are considered, but deposition temperature and pressure ranges are still sufficiently wide., Financial support from the Spanish Ministerio de Ciencia e Innovacion, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU), PID2019-107727RB-I00 (AEI/FEDER, EU), and MAT2015-73839-JIN projects and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges Ramon y Cajal Contract No. RYC-2017-22531. J.L. was financially supported by the China Scholarship Council (CSC) with No. 201506080019., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael
  • Menéndez, Enric
  • Coy, Emerson
  • Quintana, Alberto
  • Gómez Olivella, Carles
  • Esqué de los Ojos, Daniel
  • Vallcorba, Oriol
  • Frontera, Carlos
  • Aballe, Lucía
  • Nogués, Josep
  • Sort, Jordi
  • Fina, Ignasi
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (DT* B 20 8C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of predefined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices., Dr Patxi Lopez-Barbera is acknowledged for his assistance with the MOKE experiments. Vicente Garcia-Juez from Real Casa de la Moneda – Fabrica Nacional de Moneda y Timbre is acknowledged for his scientific advice. Dr Florencio Sa´nchez is acknowledged for the growth of the samples. Dr Bernat Bozzo is acknowledged for the electric transport characterization. ALBA synchrotron is acknowledged for the provision of beamtime at the MSPD (proposal number 2017092412) and CIRCE (proposal numbers 2017092462 and 2018022818) beamlines. Financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D (SEV-2015-0496 and SEV-2017-0706) and the MAT2017-85232-R, RTI2018-095303-B-C53. MAT2014-56063-C2-1-R, MAT2017-86357-C3-1-R (and associated FEDER) and MAT2015-73839-JIN projects, the Generalitat de Catalunya (2014 SGR 734 and 2017 SGR 292), AGAUR (2018 LLAV 00032 and 2019 LLAV 00050) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 665919 is acknowledged. This work was supported by the European Research Council under the SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454 and the MAGICSWITCH 2019-Proof of Concept Grant, Agreement No. 875018. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. I. F. acknowledges his RyC contract RYC-2017-22531. E. C. acknowledges the partial financial support from the National Science Centre of Poland (NCN) by the PRELUDIUM project UMO-2015/17/N/ST5/01988 and the SONATA Project No. UMO-2016/23/D/ST3/02121., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Flexible Antiferromagnetic FeRh Tapes as Memory Elements

  • Fina, Ignasi
  • Dix, Nico
  • Menéndez, Enric
  • Crespi, Anna
  • Foerster, Michael
  • Aballe, Lucía
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
The antiferromagnetic to ferromagnetic transition occurring above room temperature in FeRh is attracting interest for applications in spintronics, with perspectives for robust and untraceable data storage. Here, we show that FeRh films can be grown on a flexible metallic substrate (tape shaped), coated with a textured rock-salt MgO layer, suitable for large-scale applications. The FeRh tape displays a sharp antiferromagnetic to ferromagnetic transition at about 90 °C. Its magnetic properties are preserved by bending (radii of 300 mm), and their anisotropic magnetoresistance (up to 0.05%) is used to illustrate data writing/reading capability., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the RTI2018-095303-B-C53, MAT2017-85232-R, and MAT2015-73839-JIN projects, the Generalitat de Catalunya (2017 SGR 1377) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no 665919 is acknowledged. I.F. acknowledges RyC contract RYC-2017-22531. M. Vilardell is acknowledged for advice in XRD characterization. Patxi López-Barberá is acknowledged for assistance in MOKE experiments. J. Oró for technical assistance in SEM characterization. We thank J. Nogués for the use of the MOKE equipment. V. García-Juez from Real Casa de la Moneda—Fábrica Nacional de Moneda y Timbre is acknowledged for scientific advice. Theva Dünnschichttechnik GmbH is acknowledged for providing the flexible substrates., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Blocking of Conducting Channels Widens Window for Ferroelectric Resistive Switching in Interface‐Engineered Hf0.5Zr0.5O2 Tunnel Devices

  • Sulzbach, Milena Cervo
  • Estandía, Saúl
  • Gázquez, Jaume
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
Films of Hf0.5Z0.5O2 (HZO) contain a network of grain boundaries. In (111) HZO epitaxial films on (001) SrTiO3, for instance, twinned orthorhombic (o‐HZO) ferroelectric crystallites coexist with grain boundaries between o‐HZO and a residual paraelectric monoclinic (m‐HZO) phase. These grain boundaries contribute to the resistive switching response in addition to the genuine ferroelectric polarization switching and have detrimental effects on device performance. Here, it is shown that, by using suitable nanometric capping layer deposited on HZO film, a radical improvement of the operation window of the tunnel device can be achieved. Crystalline SrTiO3 and amorphous AlOx are explored as capping layers. It is observed that these layers conformally coat the HZO surface and allow to increase the yield and homogeneity of ferroelectric junctions while strengthening endurance. Data show that the capping layers block ionic‐like transport channels across grain boundaries. It is suggested that they act as oxygen suppliers to the oxygen‐getters grain boundaries in HZO. In this scenario it could be envisaged that these and other oxides could also be explored and tested for fully compatible CMOS technologies., Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and the MAT2017‐85232‐R (AEI/FEDER, EU), and MAT2015‐73839‐JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. M.C.S. acknowledges fellowship from “la Caixa Foundation” (ID 100010434; LCF/BQ/IN17/11620051). I.F. and J.G. acknowledge Ramón y Cajal contracts RYC‐2017‐22531 and RYC‐2012‐11709, respectively. S.E. acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his Ph.D. contract (SEV‐2015‐0496‐16‐3). M.C. work has been done as a part of her Ph.D. program in Physics at Universitat Autònoma de Barcelona. S.E. work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. Authors acknowledge the SEM‐FIB microscopy service of the Universidad de Málaga and the ICTS‐CNME for offering access to their instruments and expertise. Huan Tan is aknowledged for performing the AFM characterization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal evolution of ferroelectric behavior in epitaxial Hf0.5Zr0.5O2

  • Adkins, J. W.
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Bakaul, Saidur R.
  • Abiade, J. T.
Herein, we report a cryogenic-temperature study on the evolution of the ferroelectric properties of epitaxial Hf0.5Zr0.5O2 thin films on silicon. Wake-up, endurance, and fatigue of these films are found to be intricately correlated, strongly hysteretic, and dependent on available thermal energy. Field-dependent measurements reveal a decrease in polarization with temperature, which has been determined not to be an intrinsic change of the material property, rather a demonstration of the increase in the coercive bias of the material. Our findings suggest that a deficiency in thermal energy suppresses the mobility of defects presumed to be oxygen vacancies during wake-up and trapped injected charge during fatigue, which is responsible for polarization evolution during cycling. This permits accelerated wake-up and fatigue effects at high temperatures where thermal energy is abundant but delays these effects at cryogenic temperatures., The work at Argonne (J. W. Adkins and S. R. Bakaul were responsible for electronic transport experiments, data analysis, and contribution to manuscript writing) was supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division. The use of the Center for Nanoscale Materials was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. J. T. Abiade acknowledges financial support from the U. S. National Science Foundation under Grant No. NSFDMR-1508220. Financial support from the Spanish Ministerio de Ciencia e Innovacion, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (No. SEV-2015-0496) and the Nos. MAT2017-85232-R (AEI/FEDER, EU), and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (No. 2017 SGR 1377) is acknowledged. J. W. Adkins acknowledges the University of Illinois at Chicago’s Pipeline to an Inclusive Faculty (PIF) Program. I. Fina acknowledges Ramon y Cajal Contract No. RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Discovery of highly polarizable semiconductors BaZrS3 and Ba3Zr2S7

  • Filippone, Stephen
  • Zhao, Boyang
  • Shanyuan Niu,
  • Koocher, Nathan Z.
  • Silevitch, Daniel
  • Fina, Ignasi
  • Rondinelli, James M.
  • Ravichandran, Jayakanth
  • Jaramillo, Richard
There are few known semiconductors exhibiting both strong optical response and large dielectric polarizability. Inorganic materials with large dielectric polarizability tend to be wide-band gap complex oxides. Semiconductors with a strong photoresponse to visible and infrared light tend to be weakly polarizable. Interesting exceptions to these trends are halide perovskites and phase-change chalcogenides. Here we introduce complex chalcogenides in the Ba-Zr-S system in perovskite and Ruddlesden-Popper structures as a family of highly polarizable semiconductors. We report the results of impedance spectroscopy on single crystals that establish BaZr S 3 and Ba 3 Zr 2 S 7 as semiconductors with a low-frequency relative dielectric constant ɛ 0 in the range 50–100 and band gap in the range 1.3–1.8 eV. Our electronic structure calculations indicate that the enhanced dielectric response in perovskite BaZr S 3 versus Ruddlesden-Popper Ba 3 Zr 2 S 7 is primarily due to enhanced IR mode-effective charges and variations in phonon frequencies along 〈001〉; differences in the Born effective charges and the lattice stiffness are of secondary importance. This combination of covalent bonding in crystal structures more common to complex oxides, but comprising sulfur, results in a sizable Fröhlich coupling constant, which suggests that charge carriers are large polarons., We acknowledge support from the National Science Foundation (NSF) under Grant No. 1751736, “CAREER: Fundamentals of Complex Chalcogenide Electronic Materials,” from the MIT Skoltech Program, and from “la Caixa” Foundation MISTI Global Seed Funds. Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant No. SEV-2015-0496) and Projects No. MAT2015-73839-JIN (MINECO/FEDER, EU) and No. PID2019-107727RB-I00, and from Generalitat de Catalunya (Grant No. 2017 SGR 1377) is acknowledged. I.F. acknowledges Ramón y Cajal Contract No. RYC-2017- 22531. S.F. acknowledges support from the NSF Graduate Research Fellowship under Grant No. 1122374. The work at Caltech was supported by National Science Foundation Grant No. DMR-1606858. J.R., B.Z., and S.N. acknowledge support from Army Research Office under Award No. W911NF-19- 1-0137 and Air Force Office of Scientific Research under Award No. FA9550-16-1-0335. N.Z.K. and J.M.R. acknowledge support from the U.S. Department of Energy under Grant No. DE-SC0012375 and the DOD-HPCMP for computational resources. N.Z.K. thanks Dr. Michael Waters and Dr. Xuezeng Lu for helpful discussions. S.F. and R.J. acknowledge David Bono and Brian Neltner for helpful discussions and technical assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Non-volatile optical switch of resistance in photoferroelectric tunnel junctions

  • Long, Xiao
  • Tan, Huan
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
In the quest for energy efficient and fast memory elements, optically controlled ferroelectric memories are promising candidates. Here, we show that, by taking advantage of the imprint electric field existing in the nanometric BaTiO3 films and their photovoltaic response at visible light, the polarization of suitably written domains can be reversed under illumination. We exploit this effect to trigger and measure the associate change of resistance in tunnel devices. We show that engineering the device structure by inserting an auxiliary dielectric layer, the electroresistance increases by a factor near 2 × 103%, and a robust electric and optic cycling of the device can be obtained mimicking the operation of a memory device under dual control of light and electric fields., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Program for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S) and the MAT2017-85232-R (AEI/FEDER, EU), MAT2015-73839-JIN (MINECO/FEDER, EU), PID2019-107727RB-I00 (MINECO/FEDER, EU) projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges RyC Contract RYC-2017-22531 and Beca Leonardo from Fundación BBVA. X.L and H.T are financially supported by China Scholarship Council (CSC), respectively with nos. 201806100207 and 201906050014. The work of X.L. and H.T. have been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. We are extremely thankful to R. Solanas for his skillful operation of the PLD system. R. Silvestre-Anglada is acknowledged for assistance in I(V) characteristics fittings., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Stabilization of the Ferroelectric Phase in Epitaxial Hf1–xZrxO2 Enabling Coexistence of Ferroelectric and Enhanced Piezoelectric Properties

  • Song, Tingfeng
  • Tan, Huan
  • Dix, Nico
  • Moalla, Rahma
  • Lyu, Jike
  • Saint-Girons, Guillaume
  • Bachelet, Romain
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
Systematic studies on polycrystalline Hf1–xZrxO2 films with varying Zr contents show that HfO2 films are paraelectric (monoclinic). If the Zr content is increased, films become ferroelectric (orthorhombic) and then antiferroelectric (tetragonal). HfO2 shows very good insulating properties and it is used in metal-oxide-semiconductor field-effect devices, while ZrO2 shows good piezoelectric properties, but it is antiferroelectric. In between, Hf0.5Zr0.5O2 shows good ferroelectric properties at the expense of poorer insulating and piezoelectric properties than HfO2 and ZrO2, respectively. Here, we explore the ferroelectric, insulating, and piezoelectric properties of a series of epitaxial films of Hf1–xZrxO2 with different compositions. We show that epitaxial growth permits the stabilization of the ferroelectric phase in a whole range of Zr content (from x = 0 to x = 1). In epitaxial ZrO2 films, ferroelectricity coexists with better piezoelectric and insulating properties than Hf0.5Zr0.5O2, and in HfO2 epitaxial films, ferroelectricity coexists with better insulating properties than Hf0.5Zr0.5O2. For the case of ZrO2 films, large electroresistance is also observed. In both cases, the ferroelectric endurance is poorer than that for Hf0.5Zr0.5O2., Financial support from the Spanish Ministerio de Ciencia e Innovación, through the “Severo Ochoa” FUNFUTURE (CEX2019-000917-S) and the MAT2017-85232-R (AEI/ FEDER, EU), PID2019-107727RB-I00 (AEI/FEDER, EU), PID2020-112548RB-I00, and MAT2015-73839-JIN projects, from Generalitat de Catalunya (2017 SGR 1377), and from the French National Research Agency (ANR) through the projects MITO (ANR-17-CE05-0018-01), LILIT (NR-16-CE24- 0022), and DIAMWAFEL (ANR-15-CE08-0034-02) is acknowledged. I.F. acknowledges Ramón y Cajal contract RYC-2017-22531. The project was supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. T.S. and H.T. are financially supported by China Scholarship Council (CSC) with nos. 201807000104 and 201906050014, respectively. Work of T.S. and H.T. has been done as a part of their Ph.D. program in Materials Science at Universitat Autonoma de Barcelona., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electric-field adjustable time-dependent magnetoelectric response in martensitic FeRh alloy

  • Fina, Ignasi|||0000-0003-4182-6194
  • Quintana, Alberto|||0000-0002-9813-735X
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Martí Rovirosa, Xavier
  • Macià, Ferran|||0000-0001-5972-4810
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Sort, Jordi|||0000-0003-1213-3639
Steady or dynamic magnetoelectric response, selectable and adjustable by only varying the amplitude of the applied electric field, is found in a multiferroic FeRh/PMN-PT device. In-operando time-dependent structural, ferroelectric, and magnetoelectric characterizations provide evidence that, as in magnetic shape memory martensitic alloys, the observed distinctive magnetoelectric responses are related to the time-dependent relative abundance of antiferromagnetic-ferromagnetic phases in FeRh, unbalanced by voltage-controlled strain. This flexible magnetoelectric response can be exploited not only for energy-efficient memory operations but also in other applications, where multilevel and/or transient responses are required.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hidden magnetic states emergent under electric field, in a room temperature composite magnetoelectric multiferroic

  • Clarkson, J. D.
  • Fina, Ignasi|||0000-0003-4182-6194
  • Liu, Z. Q.
  • Lee, Y.
  • Kim, J.
  • Frontera, Carlos|||0000-0002-0091-4756
  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Wisotzki, S.
  • Sáncherz, F.
  • Sort, Jordi|||0000-0003-1213-3639
  • Hsu, S. L.
  • Ko, C.
  • Aballe, Lucía|||0000-0003-1810-8768
  • Foerster, Michael|||0000-0002-4147-6668
  • Wu, J.
  • Christen, H. M.
  • Heron, J. T.
  • Schlom, Darrell G.|||0000-0003-2493-6113
  • Salahuddin, S.
  • Kioussis, N.
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Martí, X.
  • Ramesh, Ramamoorthy
The ability to control a magnetic phase with an electric field is of great current interest for a variety of low power electronics in which the magnetic state is used either for information storage or logic operations. Over the past several years, there has been a considerable amount of research on pathways to control the direction of magnetization with an electric field. More recently, an alternative pathway involving the change of the magnetic state (ferromagnet to antiferromagnet) has been proposed. In this paper, we demonstrate electric field control of the Anomalous Hall Transport in a metamagnetic FeRh thin film, accompanying an antiferromagnet (AFM) to ferromagnet (FM) phase transition. This approach provides us with a pathway to "hide" or "reveal" a given ferromagnetic region at zero magnetic field. By converting the AFM phase into the FM phase, the stray field, and hence sensitivity to external fields, is decreased or eliminated. Using detailed structural analyses of FeRh films of varying crystalline quality and chemical order, we relate the direct nanoscale origins of this memory effect to site disorder as well as variations of the net magnetic anisotropy of FM nuclei. Our work opens pathways toward a new generation of antiferromagnetic - ferromagnetic interactions for spintronics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Disentangling Highly Asymmetric Magnetoelectric Effects in Engineered Multiferroic Heterostructures

  • Menéndez, Enric|||0000-0003-3809-2863
  • Sireus, Verònica
  • Quintana, Alberto|||0000-0002-9813-735X
  • Fina, Ignasi|||0000-0003-4182-6194
  • Casals, Blai|||0000-0002-2941-1861
  • Cichelero, Rafael
  • Kataja, Mikko
  • Stengel, Massimiliano|||0000-0003-4175-3888
  • Herranz Casabona, Gervasi|||0000-0003-4633-4367
  • Catalan, Gustau|||0000-0003-0214-4828
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Sort, Jordi|||0000-0003-1213-3639
One of the main strategies to control magnetism by voltage is the use of magnetostrictive-piezoelectric hybrid materials, such as ferromagnetic-ferroelectric heterostructures. When such heterostructures are subjected to an electric field, piezostrain-mediated effects, electronic charging, and voltage-driven oxygen migration (magnetoionics) may simultaneously occur, making the interpretation of the magnetoelectric effects not straightforward and often leading to misconceptions. Typically, the strain-mediated magnetoelectric response is symmetric with respect to the sign of the applied voltage because the induced strain (and variations in the magnetization) depends on the square of the ferroelectric polarization. Conversely, asymmetric responses can be obtained from electronic charging and voltage-driven oxygen migration. By engineering a ferromagnetic-ferroelectric hybrid consisting of a magnetically soft 50-nm thick Fe75Al25 (at. %) thin film on top of a (110)-oriented Pb(Mg1/3Nb2/3)O3-32PbTiO3 ferroelectric crystal, a highly asymmetric magnetoelectric response is obtained and the aforementioned magnetoelectric effects can be disentangled. Specifically, the large thickness of the Fe75Al25 layer allows dismissing any possible charge accumulation effect, whereas no evidence of magnetoionics is observed experimentally, as expected from the high resistance to oxidation of Fe75Al25, leaving strain as the only mechanism to modulate the asymmetric magnetoelectric response. The origin of this asymmetric strain-induced magnetoelectric effect arises from the asymmetry of the polarization reversal in the particular crystallographic orientation of the ferroelectric substrate. These results are important to optimize the performance of artificial multiferroic heterostructures.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael|||0000-0002-4147-6668
  • Menéndez, Enric|||0000-0003-3809-2863
  • Coy, Emerson|||0000-0002-4149-9720
  • Quintana, Alberto|||0000-0002-9813-735X
  • Gómez-Olivella, Carles|||0000-0002-1656-2951
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Frontera, Carlos|||0000-0002-0091-4756
  • Aballe, Lucía|||0000-0003-1810-8768
  • Nogués, Josep|||0000-0003-4616-1371
  • Sort, Jordi|||0000-0003-1213-3639
  • Fina, Ignasi|||0000-0003-4182-6194
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (ΔT* ∼ 20 °C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of pre-defined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Reversible and magnetically unassisted voltage-driven switching of magnetization in FeRh/PMN-PT

  • Fina, Ignasi|||0000-0003-4182-6194
  • Quintana, Alberto|||0000-0002-9813-735X
  • Martí, Xavier
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Sort, Jordi|||0000-0003-1213-3639
  • Fontcuberta, Josep|||0000-0002-7955-2320
Reversible control of magnetization by electric fields without assistance from a subsidiary magnetic field or electric current could help reduce the power consumption in spintronic devices. When increasing temperature above room temperature, FeRh displays an uncommon antiferromagnetic to ferromagnetic phase transition linked to a unit cell volume expansion. Thus, using the strain exerted by an adjacent piezoelectric layer, the relative amount of antiferromagnetic and ferromagnetic regions can be tuned by an electric field applied to the piezoelectric material. Indeed, large variations in the saturation magnetization have been observed when straining FeRh films grown on suitable piezoelectric substrates. In view of its applications, the variations in the remanent magnetization rather than those of the saturation magnetization are the most relevant. Here, we show that in the absence of any bias external magnetic field, permanent and reversible magnetization changes as high as 34% can be induced by an electric field, which remain after this has been zeroed. Bulk and local magnetoelectric characterization reveals that the fundamental reason for the large magnetoelectric response observed at remanence is the expansion (rather than the nucleation) of ferromagnetic nanoregions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Control of the polarization of ferroelectric capacitors by the concurrent action of light and adsorbates

  • Liu, Fanmao|||0000-0001-7590-8062
  • Fina, Ignasi|||0000-0003-4182-6194
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Rappe, Andrew M.|||0000-0003-4620-6496
  • Fontcuberta, Josep|||0000-0002-7955-2320
Ferroelectric perovskites hold promise of enhanced photovoltaic efficiency and photocatalytic activity. Consequently, the photoresponse of oxide ferroelectric thin films is an active field of research. In electrode/ferroelectric/electrode devices, internal charge in the ferroelectric, free charge in the electrodes, and buried adsorbates at interfaces combine to screen the ferroelectric polarization and to stabilize the polar state. Under illumination, photoinduced carriers and photodissociated adsorbates may disrupt the screening equilibrium, modifying the switchable polarization and altering its expected benefits. Here, we explore the photoresponse of BaTiO thin films in a capacitor geometry, focusing on the effects of visible illumination on the remanent polarization. By combining ferroelectric and X-ray photoelectron spectroscopy, we discover that photoreaction of charge-screening HO-derived adsorbates at the buried metal-ferroelectric Pt/BaTiO interface plays an unexpected pivotal role, enabling a substantial modulation (up to 75%) of the switchable remanent polarization by light. These findings illustrate that the synergy between photochemistry and photovoltaic activity at the surface of a ferroelectric material can be exploited to tune photoferroelectric activity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Isothermal anisotropic magnetoresistance in antiferromagnetic metallic IrMn

  • Galceran, Regina|||0000-0002-2080-2575
  • Fina, Ignasi|||0000-0003-4182-6194
  • Cisneros-Fernández, Jose|||0000-0002-5497-7103
  • Bozzo, Bernat
  • Frontera, Carlos|||0000-0002-0091-4756
  • López-Mir, Laura|||0000-0002-5279-8849
  • Deniz, Hakan
  • Park, K.-W.
  • Park, B.-G.
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Martí, X.
  • Jungwirth, Tomas|||0000-0002-9910-1674
  • Martínez, Benjamín|||0000-0001-9879-7748
Antiferromagnetic spintronics is an emerging field; antiferromagnets can improve the functionalities of ferromagnets with higher response times, and having the information shielded against external magnetic field. Moreover, a large list of aniferromagnetic semiconductors and metals with Néel temperatures above room temperature exists. In the present manuscript, we persevere in the quest for the limits of how large can anisotropic magnetoresistance be in antiferromagnetic materials with very large spin-orbit coupling. We selected IrMn as a prime example of first-class moment (Mn) and spin-orbit (Ir) combination. Isothermal magnetotransport measurements in an antiferromagnetic-metal(IrMn)/ferromagnetic-insulator thin film bilayer have been performed. The metal/insulator structure with magnetic coupling between both layers allows the measurement of the modulation of the transport properties exclusively in the antiferromagnetic layer. Anisotropic magnetoresistance as large as 0.15% has been found, which is much larger than that for a bare IrMn layer. Interestingly, it has been observed that anisotropic magnetoresistance is strongly influenced by the field cooling conditions, signaling the dependence of the found response on the formation of domains at the magnetic ordering temperature.