Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High ferroelectric polarization in c-oriented BaTiO3 epitaxial thin films on SrTiO3/Si(001)

  • Scigaj, Mateusz
  • Chao, C.H.
  • Gázquez, Jaume
  • Fina, Ignasi
  • Herranz, Gervasi
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Scigaj, M. et al., The integration of epitaxial BaTiO3 films on silicon, combining c-orientation, surface flatness, and high ferroelectric polarization is of main interest towards its use in memory devices. This combination of properties has been only achieved so far by using yttria-stabilized zirconia buffer layers. Here, the all-perovskite BaTiO3/LaNiO3/SrTiO3 heterostructure is grown monolithically on Si(001). The BaTiO3 films are epitaxial and c-oriented and present low surface roughness and high remnant ferroelectric polarization around 6 μC/cm2. This result paves the way towards the fabrication of lead-free BaTiO3 ferroelectric memories on silicon platforms., ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2014-56063-C2-1-R project, and from Generalitat de Catalunya (2014 SGR 734). Work at Oak Ridge National Laboratory was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division. C. H. Chao acknowledges the NSC-CSIC 2014 Summer Program in Spain for Taiwanese PhD students. I. Fina acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness of Spanish Government. INL gratefully acknowledges the European commission and the national French research agency (ANR) for funding, through the projects SITOGA (FP7-ICT-2013-11-619456), TIPS (H2020‐ICT‐02-2014‐1-644453), ANR HIRIS and ANR DIAMWAFEL. INL also acknowledges P. Regreny, C. Botella and J.-B. Goure for MBE technical assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Integration of functional complex oxide nanomaterials on silicon

  • Vila-Fungueiriño, José M.
  • Gázquez, Jaume
  • Mestres, Narcís
  • Carretero Genevrier, Adrian
The combination of standard wafer-scale semiconductor processing with the properties of functional oxides opens up to innovative and more efficient devices with high value applications which can be produced at large scale. This review uncovers the main strategies that are successfully used to monolithically integrate functional complex oxide thin films and nanostructures on silicon: the chemical solution deposition approach (CSD) and the advanced physical vapor deposition techniques such as oxide molecular beam epitaxy (MBE). Special emphasis will be placed on complex oxide nanostructures epitaxially grown on silicon using the combination of CSD and MBE. Several examples will be presented, with a particular stress on the control of interfaces and crystallization mechanisms on epitaxial perovskite oxide thin films, nanostructured quartz thin films, and octahedral molecular sieve nanowires. This review enlightens on the potential of complex oxide nanostructures and the combination of both chemical and physical elaboration techniques for novel oxide-based integrated devices., AC acknowledges the financial support from 1D-RENOX project (Cellule Energie INSIS-CNRS). J.M.V.-F. also acknowledges MINECO for support with a Ph.D. grant of the FPI program. We thank David Montero and L. Picas for technical support. We also thank P. Regreny, C. Botella, J.B. Goure for technical assistance on the Nanolyon technological platform. We acknowledge MICINN (MAT2008-01022 MAT2011-28874-c02-01 and MAT2012-35324), Consolider NANOSELECT (CSD2007-00041), Generalitat de Catalunya (2009 SGR 770 and Xarmae), and EU (HIPERCHEM, NMP4-CT2005-516858) projects. The HAADF-STEM microscopy work was conducted at the Center for Nanophase Materials Sciences, which is a DOE Office of Science User Facility. This research was supported by the European Research Council (ERC StG-2DTHERMS), Ministerio de Economía y Competitividad of Spain (MAT2013-44673-R) and EU funding Project “TIPS” Thermally Integrated Smart Photonics Systems Ref: 644453 call H2020-ICT-2014-1., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Epitaxial La0.7Sr0.3MnO3 thin films on silicon with excellent magnetic and electric properties by combining physical and chemical methods

  • Vila-Fungueiriño, José M.
  • Gázquez, Jaume
  • Magén, César
  • Saint-Girons, Guillaume
  • Bachelet, Romain
  • Carretero Genevrier, Adrian
Half-metallic ferromagnetic La0.7Sr0.3MnO3 (LSMO) represents an appealing candidate to be integrated on silicon substrates for technological devices such as sensors, data storage media, IR detectors, and so on. Here, we report high-quality epitaxial LSMO thin films obtained by an original combination of chemical solution deposition (CSD) and molecular beam epitaxy (MBE). A detailed study of the thermal, chemical, and physical compatibility between SrTiO3 (STO)/Si buffer layers and LSMO films, grown by MBE and CSD, respectively, enables a perfect integration of both materials. Importantly, we show a precise control of the coercive field of LSMO films by tuning the mosaicity of the STO/Si buffer layer. These results demonstrate the enormous potential of combining physical and chemical processes for the development of low-cost functional oxide-based devices compatible with the complementary metal oxide semiconductor technology., ACG acknowledges the financial support from the French Agence Nationale pour la Recherche (ANR), project Q-NOSS ANR-16-CE09-0006-01 and École Centrale de Lyon under the BQR 2016 project. The research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative–I3). This project has received funding from the EU‐H2020 research and innovation Program under grant agreement No 654360 having benefitted from the access provided by ICMAB-CSIC in Barcelona within the framework of the NFFA‐Europe Transnational Access Activity. Fruitful discussions with Pr. F. Rivadulla from USC are highly acknowledged. INL authors acknowledge the European Commission for funding the project TIPS (H2020-ICT-02-2014-1-644453). We thank P. Regreny, C. Botella, and J. B. Goure for the MBE technical assistance on the Nanolyon technological platform., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced ferroelectricity in epitaxial Hf0.5Zr0.5O2 thin films integrated with Si(001) using SrTiO3 templates

  • Lyu, Jike
  • Fina, Ignasi
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Estandía, Saúl
  • Gázquez, Jaume
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
SrTiO3 templates have been used to integrate epitaxial bilayers of ferroelectric Hf0.5Zr0.5O2 and La2/3Sr1/3MnO3 bottom electrodes on Si(001). The Hf0.5Zr0.5O2 films show enhanced properties in comparison to equivalent films on SrTiO3(001) single crystalline substrates. The films, thinner than 10 nm, have a very high remnant polarization of 34 lC/cm2. Hf0.5Zr0.5O2 capacitors at an operating voltage of 4V present a long retention time well beyond 10 years and high endurance against fatigue up to 109 cycles. The robust ferroelectric properties displayed by the epitaxial Hf0.5Zr0.5O2 films on Si(001) using SrTiO3 templates pave the way for the monolithic integration on silicon of emerging memory devices based on epitaxial HfO2., Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (No. SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU) and MAT2015-73839-JIN projects and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges Ramón y Cajal Contract No. RYC-2017-22531. J.L. is financially supported by the China Scholarship Council (CSC) with No. 201506080019. S.E. acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his Ph.D. Contract (No. SEV-2015-0496-16-3) and its cofunding by the ESF. The work of J.L. and S.E. has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. INL authors acknowledge the financial support from the European Commission through the Project TIPS (No. H2020-ICT-02-2014-1-644453) and from the French national research agency (ANR) through the projects DIAMWAFEL (No. ANR-15-CE08-0034), LILIT (No. ANR-16-CE24-0022), and MITO (No. ANR-17-CE05-0018). They are also grateful to the joint laboratory INL-RIBER and P. Regreny, C. Botella, and J. B. Goure for the MBE technical support on the Nanolyon technological platform., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thickness effect on ferroelectric properties of La-doped HfO2 epitaxial films down to 4.5 nm

  • Song, Tingfeng
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Dix, Nico
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Stabilization of the orthorhombic phase of HfO2 with La allows very high polarization and endurance. However, these properties have not been confirmed yet in films having thickness of less than 10 nm. We have grown (111)-oriented La (2 at%) doped epitaxial HfO2 films on SrTiO3(001) and Si(001) substrates, and we report on the thickness dependence of their ferroelectric properties. Films of less than 7 nm have a high remanent polarization of about 30 µC cm-2 , show slight wakeup, endurance of at least 1010 cycles and retention of more than 10 years, both latest properties measured at the same poling voltage. La-doped HfO2 films even as thin as 4.5 nm also show robust ferroelectric properties., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019- 000917-S), MAT2017-85232-R (AEI/FEDER, EU), PID2020- 112548RB-I00 (AEI/FEDER, EU), and PID2019-107727RB-I00 (AEI/FEDER, EU) projects, from CSIC through the i-LINK (LINKA20338) program, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. IF acknowledges Ramón y Cajal contract RYC-2017- 22531. TS is financially supported by China Scholarship Council (CSC), grant No. 201807000104. TS work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. RB and GSG acknowledge the financial support from the European Commission through the project TIPS (No. H2020-ICT-02-2014-1-644453), from the French national research agency (ANR) through the projects DIAMWAFEL (No. ANR-15-CE08-0034), and MITO (No. ANR-17- CE05-0018), and from CNRS through the MITI interdisciplinary programs (project NOTE). They are also grateful to the joint laboratory INL-RIBER, P. Regreny, C. Botella and J. B. Goure for the MBE technical support on the Nanolyon technological platform., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Giant tuning of electronic and thermoelectric properties by epitaxial strain in p-type Sr-doped LaCrO3 transparent thin films

  • Han, Dong
  • Moalla, Rahma
  • Fina, Ignasi
  • Giordano, Valentina M.
  • d’Esperonnat, Marc
  • Botella, Claude
  • Grenet, Geneviève
  • Debord, Régis
  • Pailhès, Stéphane
  • Saint-Girons, Guillaume
  • Bachelet, Romain
The impact of epitaxial strain on the structural, electronic, and thermoelectric properties of p-type transparent Sr-doped LaCrO3 thin films has been investigated. For this purpose, high-quality fully-strained La0.75Sr0.25CrO3 (LSCO) epitaxial thin films were grown by molecular beam epitaxy on three different (pseudo)cubic (001)-oriented perovskite-oxide substrates: LaAlO3, (LaAlO3)0.3(Sr2AlTaO6)0.7, and DyScO3. The lattice mismatch between the LSCO films and the substrates induces in-plane strain ranging from -2.06% (compressive) to +1.75% (tensile). The electric conductivity can be controlled over two orders of magnitude, σ ranging from ~0.5 S cm-1 (tensile strain) to 35 S cm-1 (compressive strain). Consistently, the Seebeck coefficient S can be finely tuned by a factor of almost two from ~127 μV K-1 (compressive strain) to 208 μV K-1 (tensile strain). Interestingly, we show that the thermoelectric power factor (PF = S2 σ) can consequently be tuned by almost two orders of magnitude. The compressive strain yields a remarkable enhancement by a factor of three for 2% compressive strain with respect to almost relaxed films. These results demonstrate that epitaxial strain is a powerful lever to control the electric properties of LSCO and enhance its thermoelectric properties, which is of high interest for various devices and key applications such as thermal energy harvesters, coolers, transparent conductors, photo-catalyzers and spintronic memories., Financial support from the European Commission through the project TIPS (H2020-ICT-02-2014-1-644453), the French national research agency (ANR) through the projects MITO (ANR-17-CE05-0018), LILIT (ANR-16-CE24-0022), DIAMWAFEL (ANR-15-CE08-0034-02), the CNRS through the MITI interdisciplinary programs (project NOTE), IDEX Lyon-St-Etienne through the project IPPON, the Spanish Ministerio de Ciencia e Innovación, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU), PID2019-107727RB-I00 (AEI/FEDER, EU), and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. The China Scholarship Council (CSC) is acknowledged for the grant of Dong Han. Ignasi Fina acknowledges Ramón y Cajal contract RYC-2017-22531. Seebeck measurements at ILM were made within the ILMTech transport platform. The authors are also grateful to Jean-Baptiste Goure, Philippe Regreny, Aziz Benamrouche, and Bernat Bozzo for their technical support and the reviewers for their valuable and constructive comments that have improved the quality of the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of La Concentration on Ferroelectricity of La-Doped HfO2 Epitaxial Thin Films

  • Song, Tingfeng
  • Tan, Huan
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Epitaxial thin films of HfO2 doped with La have been grown on SrTiO3(001) and Si(001), and the impact of the La concentration on the stabilization of the ferroelectric phase has been determined. Films with 2-5 at. % La doping present the least amount of paraelectric monoclinic and cubic phases and exhibit the highest polarization, having a remanent polarization above 20 μC/cm2. The dopant concentration results in an important effect on the coercive field, which is reduced with increasing La content. Combined high polarization, high retention, and high endurance of at least 1010 cycles is obtained in 5 at. % La-doped films., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00 (AEI/FEDER, EU), PID2019-107727RB-I00 (AEI/FEDER, EU), and MAT2017-85232-R (AEI/FEDER, EU) projects, from CSIC through the i-LINK (LINKA20338) program, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. Project was supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. I.F. acknowledges Ramón y Cajal Contract RYC-2017-22531. T.S. and H.T. are financially supported by China Scholarship Council (CSC) with No. 201807000104 and 201906050014, respectively. T.S. and H.T.’s work has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. R.B. and G.S.G. acknowledge the financial support from the European Commission through the project TIPS (No. H2020-ICT-02-2014-1-644453), from the French national research agency (ANR) through the projects DIAMWAFEL (No. ANR-15-CE08-0034), LILIT (No. ANR-16-CE24-0022), and MITO (No. ANR-17-CE05-0018), and from CNRS through the MITI interdisciplinary programs (project NOTE). They are also grateful to the joint laboratory INL-RIBER, P. Regreny, C. Botella, and J. B. Goure for the MBE technical support on the Nanolyon technological platform., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Epitaxial La0.7Sr0.3MnO3 thin films on silicon with excellent magnetic and electric properties by combining physical and chemical methods

  • Vila-Fungueirino, J.M.
  • Gazquez, J.
  • Magen, C.
  • Saint-Girons, G.
  • Bachelet, R.
  • Carretero-Genevrier, A.
Half-metallic ferromagnetic La0.7Sr0.3MnO3 (LSMO) represents an appealing candidate to be integrated on silicon substrates for technological devices such as sensors, data storage media, IR detectors, and so on. Here, we report high-quality epitaxial LSMO thin films obtained by an original combination of chemical solution deposition (CSD) and molecular beam epitaxy (MBE). A detailed study of the thermal, chemical, and physical compatibility between SrTiO3 (STO)/Si buffer layers and LSMO films, grown by MBE and CSD, respectively, enables a perfect integration of both materials. Importantly, we show a precise control of the coercive field of LSMO films by tuning the mosaicity of the STO/Si buffer layer. These results demonstrate the enormous potential of combining physical and chemical processes for the development of low-cost functional oxide-based devices compatible with the complementary metal oxide semiconductor technology. [GRAPHICS] .