Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Low-Loss and Compact Silicon Rib Waveguide Bends

  • Brimont, Antoine Christian Jacques
  • Hu, X.
  • Cueff, Sébastien
  • Rojo-Romeo, Pedro
  • Saint Girons, Guillaume
  • Zanzi, Andrea
  • Orobtchouk, Regis
  • Griol Barres, Amadeu
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] Waveguide bends support intrinsically leaky propagation modes due to unavoidable radiation losses. It is known that the losses of deep-etched/strip waveguide bends increase inevitably for decreasing radius. Here, we theoretically and experimentally demonstrate that this result is not directly applicable to shallow-etched/rib waveguide bends. Indeed, we show that the total losses caused by the bends reach a local minimum value for a certain range of compact radii and rib waveguide dimensions. Specifically, we predicted the minimum intrinsic losses < 0.1 dB/90 degrees turn within the range of 25-30 mu m bend radii in a 220 nm-thick and 400 nm-wide silicon rib waveguide with 70 nm etching depth. This unexpected outcome, confirmed by experimental evidence, is due to the opposite evolution of radiation (bending) losses and losses caused by the coupling to lateral slab modes (slab leakage) as a function of the bend radius, hence creating an optimum loss region. This result may have important implications for the design of compact and low-loss silicon nanophotonic devices., This work was supported in part by the European STREP Program under Grant FP7-ICT-2013-11-619456-SITOGA and Grant FP7-ICT-2012-10-318240 PhoxTroT and in part by LEOMIS under Grant TEC2012-38540. (Corresponding author: Regis Orobtchouk.)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Functional oxides in photonic integrated devices

  • Herranz, Gervasi
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore¿s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community., Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultra-compact electro-absorption VO2-Si modulator with TM to TE conversion

  • Sánchez Diana, Luis David
  • Cortés Juan, Frederic
  • Rosa Escutia, Álvaro
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] An ultra-compact (6 μm length) electro-absorber modulator with transverse magnetic (TM) to transverse-electric (TE) conversion is proposed. The device performance is controlled by means of the semiconductor-to-metal transition of the vanadium dioxide. For the insulating state, the device performs as a TM–TE converter with insertion losses of 0.3 dB and extinction ratio of 36 dB at a wavelength of 1.55 μm. Changing to the metallic state, the TE generated component is attenuated due to the increase of losses in the VO2 and the mode mismatch. This electro-absorber modulator shows a broadband operation with an extinction ratio higher than 10 dB and insertion losses below 0.5 dB for a range of 60 nm covering the whole C-band., This work was supported by the European Commission under project FP7-ICT-2013-11-619456 SITOGA. Financial support from TEC2016-76849-C2-2-R and NANOMET Conselleria de Educacic, Cultura i Esport -PROMETEOII/2014/034 are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electro-Optical Modulation Based on Pockels Effect in BaTiO3 With a Multi-Domain Structure

  • Castera, Pau
  • Gutiérrez Campo, Ana María
  • Tulli, Domenico
  • Cueff, Sébastien
  • Orobtchouk, Regis
  • Rojo Romeo, Pedro
  • Saint-Girons, Guillaume
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The influence of an in-plane multi-domain structure in BaTiO3 films grown on SrTiO3/Si buffers for highly efficient electro-optic modulation has been analyzed. The modulation performance can be significantly enhanced by rotating a certain angle, the optical waveguide, with respect to the BaTiO3 crystallographic axes. A robust electro-optical performance against variations in the domain structure as well as the lowest V-pi voltage can be achieved by using the rotation angles between 35 degrees and 55 degrees. Our calculations show that Vp voltages below 1.7 V for a modulation length of 2 mm can be obtained by means of a CMOS compatible hybrid silicon/BaTiO3 waveguide structure., This work was supported by the European Commission under Grant FP7-ICT-2013-11-619456 SITOGA. The work of P. Sanchis was supported in part by GVA under Grant PROMETEOII/2014/034 and in part by the Ministerio de Economia y Competitividad under Grant TEC2012-38540 LEOMIS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Barium titanate (BaTiO3) RF characterization for application in electro-optic modulators

  • Rosa Escutia, Álvaro
  • Tulli, Domenico
  • Castera-Molada, Pau
  • Gutiérrez Campo, Ana María
  • Vilquin, Bertrand
  • Eltes, Felix
  • Abel, Stefan
  • Fompeyrine, Jean
  • Griol Barres, Amadeu
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] Barium titanate (BaTiO3 or BTO) is currently one of the most promising ferroelectric materials for enabling Pockels modulation that is compatible with silicon photonic circuits. The relative permittivity of BTO has been characterized in thin films deposited on a silicon-on-insulator (SOI) substrate. High values between 800 and 1600 have been estimated at 20 GHz. Furthermore, no substantial difference has been obtained by using BTO grown by molecular beam epitaxy and sputtering. The obtained permittivity has been used to properly design the RF electrodes for high-speed modulation in hybrid BTO/Si devices. Electrodes have been fabricated and the possibility of achieving modulation bandwidths up to 40 GHz has been demonstrated. The bandwidth is limited by the microwave propagation losses and, in this case, different losses have been measured depending on the BTO growth process., Financial support from European Commission under project FP7-ICT-2013-11-619456 SITOGA, and from TEC2016-76849-C2-2-R and NANOMET Conselleria de Educació, Cultura i Esport -PROMETEOII/2014 034 are acknowledged. Álvaro Rosa also acknowledges the Spanish Ministry of Economy and Competitiveness for funding his grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of BaTiO3 ferroelectric orientation for electro-optic modulation on silicon

  • Castera Molada, Pau
  • Tulli, Domenico
  • Gutiérrez Campo, Ana María
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The influence of BaTiO3 ferroelectric domain orientations for high efficiency electro-optic modulation has been thoroughly analyzed. The Mach-Zehnder modulator structure is based on a CMOS compatible silicon/BaTiO3/silicon slot waveguide that supports both TE and TM polarizations whereas the Pockels effect is exploited by the application of a horizontal electric field with lateral electrodes placed on top of the BaTiO3 layer. The influence of the waveguide parameters has been optimized for each configuration and the lowest V&#960; voltage combined with low losses has been determined. A V&#960;L as low as 0.27 V·cm has been obtained for a-axis oriented BaTiO3 and TE polarization by rotating the waveguide structure to an optimum angle., This work was supported by the European Commission under project FP7-ICT-2013-11-619456 SITOGA. Financial support from TEC2012-38540 LEOMIS is also acknowledged. We also acknowledge Stefan Abel and Sebastien Cueff for their helpful comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultra-compact TE and TM pass polarizers based on vanadium dioxide on silicon

  • Sánchez Diana, Luis David
  • Lechago Buendía, Sergio
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] Vanadium dioxide (VO2) is a metal-insulator transition (MIT) oxide recently used in plasmonics, metamaterials, and reconfigurable photonics. Because of the MIT, VO2 shows great change in its refractive index allowing for ultra-compact devices with low power consumption. We theoretically demonstrate a transverse electric (TE) and a transverse magnetic (TM) pass polarizer with an ultra-compact length of only 1 &#956;m and tunable using the MIT of the VO2. During the insulating phase, both devices exhibit insertion losses below 2 dB at 1550 nm. Changing to the metallic phase, the unwanted polarization is attenuated above 15 dB while insertion losses are kept below 3 dB. Broadband operation over a range of 60 nm is also achieved., This work was supported by the European Commission under project FP7-ICT-2013-11-619456 SITOGA. Financial support from TEC2012-38540 LEOMIS is also acknowledged. L. Sanchez also acknowledges the Generalitat Valenciana for funding his grant in the context of the VALi+d program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optical switching in hybrid VO2/Si waveguides thermally triggered by lateral microheaters

  • Olivares-Sánchez-Mellado, Irene
  • Sánchez Diana, Luis David
  • Larrea-Luzuriaga, Roberto Alejandro
  • Menghini, Mariela
  • Homm, Pia
  • Jang, Lee-Woon
  • van Bilzen, Bart
  • Seo, Jin Won
  • Locquet, Jean-Pierre
  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Griol Barres, Amadeu
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The performance of optical devices relying in vanadium dioxide (VO2) technology compatible with the silicon platform depends on the polarization of light and VO2 properties. In this work, optical switching in hybrid VO2/Si waveguides thermally triggered by lateral microheaters is achieved with insertion losses below 1 dB and extinction ratios above 20 dB in a broad bandwidth larger than 30 nm. The optical switching response has been optimized for TE and TM polarizations by using a homogeneous and a granular VO2 layer, respectively, with a small impact on the electrical power consumption. The stability and reversibility between switching states showing the possibility of bistable performance is also demonstrated. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement., Funding from project TEC2016-76849 (MINECO/FEDER, UE) is acknowledged. The SOI samples were fabricated at IHP (we acknowledge Lars Zimmermann) in the framework of FP7-ICT-2013-11-619456 SITOGA project. Irene Olivares and Roberto Larrea also acknowledge respectively the Universitat Politecnica de Valencia and the Ecuadorian Government for funding their grant. P.H. acknowledges support from Becas Chile-CONICYT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental demonstration of a tunable transverse electric pass polarizer based on hybrid VO2/silicon technology

  • Sánchez Diana, Luis David
  • Olivares-Sánchez-Mellado, Irene
  • Menghini, Mariela
  • Homm, Pia
  • Locquet, Jean-Pierre
  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] A tunable transverse electric (TE) pass polarizer is demonstrated based on hybrid vanadium dioxide/silicon (VO2/Si) technology. The 20-mu m-long TE pass polarizer exploits the phase transition of the active VO2 material to control the rejection of the unwanted transverse magnetic (TM) polarization. The device features insertion losses below 1 dB at static conditions and insertion losses of 5.5 dB and an attenuation of TM polarization of 19 dB in the active state for a wavelength range between 1540 nm and 1570 nm. To the best of our knowledge, this is the first time that tunable polarizers compatible with Si photonics are demonstrated. (C) 2018 Optical Society of America, Ministerio de Economia y Competitividad (MINECO) (TEC2016-76849); European Commission (EC) [PHRESCO (688579), SITOGA (619456)]; Universitat Politecnica de Valencia; Comision Nacional de Investigacion Cientifica y Tecnologica (CONICYT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of the external resistance on the switching power consumption in VO2 nano gap junctions

  • Sánchez Diana, Luis David
  • Rosa Escutia, Álvaro
  • Gutierrez Campo, Ana Maria
  • Homm, Pia
  • Van Bilzen, Bart
  • Menghini, Mariela
  • Locquet, Jean-Pierre
  • Griol Barres, Amadeu
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The influence of an external resistance on the performance of VO2 nanogap junctions is analyzed and experimentally characterized. The current-voltage response shows the reversible metal-insulator transition typical of VO2 based devices. When reaching the metallic state, the current through the VO2 junction is abruptly increased, which may result in electrical contact damage. Therefore, an external resistance in series with the VO2 junction is usually employed to limit the maximum current through the device. Our results indicate that the external resistance plays a key role in the switching power consumption showing an optimum value, which depends on the dimensions of the VO2 junction. In such a way, power consumption reductions up to 90% have been demonstrated by selecting the optimum external resistance value., This work was supported by the European Commission under Project No. FP7-ICT-2013-11-619456 SITOGA. Financial support from TEC2016-76849-C2-2-R and NANOMET Conselleria de Educacio, Cultura i Esport-PROMETEOII/2014 034 is also acknowledged. P.H. acknowledges support from Becas Chile-CONICYT.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High ferroelectric polarization in c-oriented BaTiO3 epitaxial thin films on SrTiO3/Si(001)

  • Scigaj, Mateusz
  • Chao, C.H.
  • Gázquez, Jaume
  • Fina, Ignasi
  • Herranz, Gervasi
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Scigaj, M. et al., The integration of epitaxial BaTiO3 films on silicon, combining c-orientation, surface flatness, and high ferroelectric polarization is of main interest towards its use in memory devices. This combination of properties has been only achieved so far by using yttria-stabilized zirconia buffer layers. Here, the all-perovskite BaTiO3/LaNiO3/SrTiO3 heterostructure is grown monolithically on Si(001). The BaTiO3 films are epitaxial and c-oriented and present low surface roughness and high remnant ferroelectric polarization around 6 μC/cm2. This result paves the way towards the fabrication of lead-free BaTiO3 ferroelectric memories on silicon platforms., ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2014-56063-C2-1-R project, and from Generalitat de Catalunya (2014 SGR 734). Work at Oak Ridge National Laboratory was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division. C. H. Chao acknowledges the NSC-CSIC 2014 Summer Program in Spain for Taiwanese PhD students. I. Fina acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness of Spanish Government. INL gratefully acknowledges the European commission and the national French research agency (ANR) for funding, through the projects SITOGA (FP7-ICT-2013-11-619456), TIPS (H2020‐ICT‐02-2014‐1-644453), ANR HIRIS and ANR DIAMWAFEL. INL also acknowledges P. Regreny, C. Botella and J.-B. Goure for MBE technical assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Epitaxy of SrTiO3 on Silicon: The Knitting Machine Strategy

  • Saint-Girons, Guillaume
  • Gázquez, Jaume
  • Grenet, Geneviève
Saint-Girons, Guillaume et al., SrTiO3 (STO) crystalline layers grown on Si open unique perspectives for the monolithic integration of functional oxides in silicon-based devices, but their fabrication by molecular beam epitaxy (MBE) is challenging due to unwanted interfacial reactions. Here we show that the formation of single-crystal STO layers on Si by MBE at the moderate growth temperature imposed by these interface reactions results from the crystallization of a partially separated amorphous mixture of SrO and TiO2 activated by an excess of Sr. We identify the atomic pathway of this mechanism and show that it leads to an antiphase domain morphology. On the basis of these results, we suggest and test alternative STO growth strategies to avoid antiphase boundary formation and significantly improve the STO structural quality. The understanding provided by these results offers promising prospects to crystallize perovskite oxides on semiconductors at moderate temperature and circumvent the issue of parasitic interface reactions., This work was partly supported by the European projects SITOGA (STREP FP7, grant number 619456) and TIPS (ICT H2020, grant number 107347) as well as by the French ANR programs HIRIS and DIAMWAFEL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards Oxide Electronics: a Roadmap

  • Coll, Mariona
  • Fontcuberta, Josep
  • Althammer, M.
  • Bibes, Manuel
  • Boschker, H.
  • Calleja Lázaro, Alberto
  • Cheng, G.
  • Cuoco, M.
  • Dittmann, Regina
  • Dkhil, B.
  • El Baggari, I.
  • Fanciulli, M.
  • Fina, Ignasi
  • Fortunato, E.
  • Frontera, Carlos
  • Fujita, S.
  • García, V.
  • Goennenwein, S.T.B.
  • Granqvist, C.-G.
  • Grollier, J.
  • Gross, R.
  • Hagfeldt, A.
  • Herranz, Gervasi
  • Hono, K.
  • Houwman, E.
  • Huijben, M.
  • Kalaboukhov, A.
  • Keeble, D.J.
  • Koster, G.
  • Kourkoutis, L.F.
  • Levy, J.
  • Lira-Cantú, Mónica
  • MacManus-Driscoll, J.L.
  • Mannhart, Jochen
  • Martins, R.
  • Menzel, S.
  • Mikolajick, T.
  • Napari, M.
  • Nguyen, M.D.
  • Niklasson, G.
  • Paillard, C.
  • Panigrahi, S.
  • Rijnders, G.
  • Sánchez Barrera, Florencio
  • Sanchis, P.
  • Sanna, S.
  • Schlom, Darrell G.
  • Schroeder, U.
  • Shen, K.M.
  • Siemon, A.
  • Spreitzer, M.
  • Sukegawa, H.
  • Tamayo, R. R.
  • Brink, J. van den
  • Pryds, N.
  • Miletto Granozio, F.
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore’s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics., The authors acknowledge financial support from the Netherlands Organization for Scientific Research (NWO). We acknowledge fruitful interactions with our many collaborators in the realm of artificial quantum materials, especially the groups of J.C. Séamus Davis, Craig J. Fennie, Eun-Ah Kim, Lena F. Kourkoutis, and David A. Muller. This work was supported by the National Science Foundation (Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM)) under Cooperative Agreement No. DMR-1539918. Financial support from the Spanish Ministry of Economy and Competitiveness (SEV-2015-0496, MAT2014-56063-C2-1-R, and MAT2017-85232-R), from Generalitat de Catalunya (2014 SGR 734), and from Slovenian Research Agency (P2-0091 and J2-6759) is acknowledged. The authors acknowledge funding from the EPSRC grant EP/ P027032/1. Prof. O. Nilsen is acknowledged for valuable discussions on the current status of ALD perovskites. Author thanks fruitful discussions with Dr. J. Santiso. Financial support from the Spanish Ministry of Economy and Competitiveness through the ''Severo Ochoa" Programme for Centres of Excellence in R&D (SEV-2015-0496), and projects MAT2015-71664-R and MAT2015- 67593-P is acknowledged. This work was supported by PARADIM, a National Science Foundation Materials Innovation Platform (Grant DMR-1539918), and by the Air Force Office of Scientific Research (Award number FA 9550-16-1-0305). Funding from the DFG (German Science Foundation) within the collaborative research center SFB 917 'Nanoswitches' and the W2/ W3 program of the Helmholtz association is gratefully acknowledged. We furthermore acknowledge funding by the ToBE CoST action (MP1308). We acknowledge financial support from the ERC Consolidator grant ‘‘MINT” (contract number n° 615759) and the ANR project ‘‘FERROMON”. This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agreement 732642 (ULPEC project). This work is supported by a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Labex NanoSaclay, reference: ANR-10-LABX-0035). This work was supported in part by the EFRE fund of the European Commission, by the Free State of Saxony (Germany), and by funding of the Deutsche Forschungsgemeinschaft (DFG project: Inferox). This work was supported in parts by the Deutsche Forschungsge-meinschaft (DFG) under Grant SFB 917 ''Nanoswitches" and the COST Action MP1308 ''TO-BE (Towards Oxide-Based Electronics)". This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agree-ment 732642 (ULPEC project). We thank M. Belmoubarik and J. Uzuhashi for their technical assistance for Fig. 36. We acknowledge support from the ImPACT Program of Council for Science, Technology and Innovation, Japan. Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA. We thank the financial support from the SNSF NRP70 ‘‘Energy Turnaround” and GRAPHENE project supported by the European Commission Seventh Framework Programme under contract 604391 is gratefully acknowledged. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295; for the grant ENE2016-79282-C5-2-R and the OrgEnergy Excelence NetworkCTQ2016-81911-REDT. To the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l’Energia (Xarmae). To the CERCA Pro-gramme/Generalitat de Catalunya and to the European COST Action StableNextSol project MP1307. The authors would like to acknowledge the financial support from ACCIO-Generalitat de Catalunya and the European Union for the 3D-PHOTOXIDES ERA-NET MANUNET II and from IV Fondo de Emprendedores of Fundación Repsol for the SOLAR OXIDES project. The authors would also thank Mr. Andrés Gómez from Institut de Ciència de Materials de Barcelona (ICMAB) for the pc-AFM measure-ments and Mr. Alex Hernández from Institut de Recerca en Energia de Catalunya (IREC) for the sputtering and valuable guidance. We would like to acknowledge the financial support granted by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, and associated FEDER], I.F. acknowledges Ramon y Cajal contract RYC-2017-22531, the Generalitat de Catalunya (2014-SGR-734). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). C.P. and B.D. acknowledge a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Grant No. ANR-10-LABX-0035, Labex NanoSaclay). The authors would like to acknowledge L. Pereira and P. Bar-quinha for fruitful discussions during the manuscript preparation. We acknowledge the funding from Portuguese Foundation for Science and Technology, Reference UID/CTM/50025/2013 and FEDER funds through the COMPETE 2020 Programme under the project number POCI-01-0145-FEDER-007688. Part of this work is partially financed from European Community H2020 program under grant agreements No. 665046 (project Symbiotic) and No. 644631 (project Roll-Out). Several of the recent advances in electrochromic and ther-mochromic materials, reported above, were reached with financial support received from the European Research Council under the European Community’s Seventh Framework Program (FP2007– 2013)/ERC Grant Agreement No. 267234 (‘‘GRINDOOR”)., Peer reviewed