Skip to main content

DESARROLLO DE OXIDOS METALICOS DE TRANSICION CON TECNOLOGIA DE SILICIO PARA APLICACIONES DE CONMUTACION E INTERCONEXION OPTICAS EFICIENTES Y RESPETUOSAS CON EL MEDIO AMBIENTE

TEC2016-76849-C2-2-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A SiGe Slot Approach for Enhancing Strain Induced Pockels Effect in the Mid-IR Range

  • Olivares-Sánchez-Mellado, Irene
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] Strained silicon was proposed more than a decade ago promising to revolutionize the silicon photonics field by allowing efficient modulation in this platform. Despite all the efforts, still rather low chi(2) values have been measured in strained silicon devices. In addition, the way of applying strain has not barely changed since the concept was proposed, usually consisting on a silicon waveguide covered by a stressor material such as silicon nitride. In this letter, a SiGe slot approach is explored as a different route to enhance the strain induced Pockels effect in the mid-IR range. Such approach would allow effective index change values which are near to 10(-4) and improve the values expected for the most common silicon - silicon nitride structure by more than three orders of magnitude., This work was supported in part by the Ministerio de Ciencia e Innovacion under Grant TEC2016-76849 and Grant PID2019-111460GB-I00 and in part by the Generalitat Valenciana under Grant PROMETEO/2019/123.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Functional oxides in photonic integrated devices

  • Herranz, Gervasi
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore¿s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community., Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Toward Nonvolatile Switching in Silicon Photonic Devices

  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
  • Olivares-Sánchez-Mellado, Irene
  • Brimont, Antoine Christian Jacques
[EN] Nonvolatile switching is still a missing functionality in current mainstream silicon photonics complementary metal-oxide-semiconductor platforms. Fundamentally, nonvolatile switching stands for the ability to switch between two or more photonic states reversibly without needing additional energy to hold each state. Therefore, such a feature may push one step further the potential of silicon photonics by offering new ways of achieving photonic reconfigurability with ultrasmall energy consumption. Here, a detailed review of current developments that enable nonvolatile switching in silicon photonic waveguide devices is provided. Nonvolatility is successfully demonstrated either based on device engineering or by hybrid integration of silicon waveguides with materials exhibiting unique optical properties. Furthermore, several approaches with high potential for evolving toward a nonvolatile behavior with enhanced performance are also being explored. In most cases, many development steps are still necessary to ensure reliable devices. However, this research field is expected to progress in the coming years boosted by current and emerging applications benefiting from such functionality, such as new paradigms for photonic computing or advanced reconfigurable circuits for programmable photonic systems., This work was supported by Ministerio de Economia y Competitividad (MINECO) (TEC2016-76849); Ministerio de Ciencia e Innovacion (PID2019-111460GB-I00, FPU17/04224); and Generalitat Valenciana (PROMETEO/2019/123).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the influence of interface charging dynamics and stressing conditions in strained silicon devices

  • Olivares-Sánchez-Mellado, Irene
  • Ivanova-Angelova, Todora|||0000-0002-8150-4133
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The performance of strained silicon devices based on the deposition of a top silicon nitride layer with high stress have been thoroughly analyzed by means of simulations and experimental results. Results clearly indicate that the electro-optic static response is basically governed by carrier efects. A frst evidence is the appearance of a variable optical absorption with the applied voltage that should not occur in case of having a purely electro-optic Pockels efect. However, hysteresis and saturation efects are also observed. We demonstrate that such efects are mainly due to the carrier trapping dynamics at the interface between the silicon and the silicon nitride and their infuence on the silicon nitride charge. This theory is further confrmed by analyzing identical devices but with the silicon nitride cladding layer optimized to have intrinsic stresses of opposite sign and magnitude. The latter is achieved by a post annealing process which produces a defect healing and consequently a reduction of the silicon nitride charge. Raman measurements are also carried out to confrm the obtained results., Funding from projects TEC2016-76849-C2-2-R (MINECO/FEDER, UE) and NANOMET PLUS-Conselleria d'EducaciA<SUP>3</SUP>, Cultura i Esport - PROMETEOII/2014/034 is acknowledged. Irene Olivares also acknowledges the Universitat Politecnica de Valencia for funding his research staff training (FPI) grant. The authors would also like to thank Steven Van Roye from Ghent University for participating in the measurements of the annealed samples.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultra-compact electro-absorption VO2-Si modulator with TM to TE conversion

  • Sánchez Diana, Luis David
  • Cortés Juan, Frederic
  • Rosa Escutia, Álvaro
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] An ultra-compact (6 μm length) electro-absorber modulator with transverse magnetic (TM) to transverse-electric (TE) conversion is proposed. The device performance is controlled by means of the semiconductor-to-metal transition of the vanadium dioxide. For the insulating state, the device performs as a TM–TE converter with insertion losses of 0.3 dB and extinction ratio of 36 dB at a wavelength of 1.55 μm. Changing to the metallic state, the TE generated component is attenuated due to the increase of losses in the VO2 and the mode mismatch. This electro-absorber modulator shows a broadband operation with an extinction ratio higher than 10 dB and insertion losses below 0.5 dB for a range of 60 nm covering the whole C-band., This work was supported by the European Commission under project FP7-ICT-2013-11-619456 SITOGA. Financial support from TEC2016-76849-C2-2-R and NANOMET Conselleria de Educacic, Cultura i Esport -PROMETEOII/2014/034 are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Barium titanate (BaTiO3) RF characterization for application in electro-optic modulators

  • Rosa Escutia, Álvaro
  • Tulli, Domenico
  • Castera-Molada, Pau
  • Gutiérrez Campo, Ana María
  • Vilquin, Bertrand
  • Eltes, Felix
  • Abel, Stefan
  • Fompeyrine, Jean
  • Griol Barres, Amadeu
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] Barium titanate (BaTiO3 or BTO) is currently one of the most promising ferroelectric materials for enabling Pockels modulation that is compatible with silicon photonic circuits. The relative permittivity of BTO has been characterized in thin films deposited on a silicon-on-insulator (SOI) substrate. High values between 800 and 1600 have been estimated at 20 GHz. Furthermore, no substantial difference has been obtained by using BTO grown by molecular beam epitaxy and sputtering. The obtained permittivity has been used to properly design the RF electrodes for high-speed modulation in hybrid BTO/Si devices. Electrodes have been fabricated and the possibility of achieving modulation bandwidths up to 40 GHz has been demonstrated. The bandwidth is limited by the microwave propagation losses and, in this case, different losses have been measured depending on the BTO growth process., Financial support from European Commission under project FP7-ICT-2013-11-619456 SITOGA, and from TEC2016-76849-C2-2-R and NANOMET Conselleria de Educació, Cultura i Esport -PROMETEOII/2014 034 are acknowledged. Álvaro Rosa also acknowledges the Spanish Ministry of Economy and Competitiveness for funding his grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultra-low loss hybrid ITO/Si thermo-optic phase shifter with optimized power consumption

  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Hurtado Montañés, Juan|||0000-0002-4870-7641
  • Griol Barres, Amadeu
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] Typically, materials with large optical losses such as metals are used as microheaters for silicon based thermo-optic phase shifters. Consequently, the heater must be placed far from the waveguide, which could come at the expense of the phase shifter performance. Reducing the gap between the waveguide and the heater allows reducing the power consumption or increasing the switching speed. In this work, we propose an ultra-low loss microheater for thermo-optic tuning by using a CMOS-compatible transparent conducting oxide such as indium tin oxide (ITO) with the aim of drastically reducing the gap. Using finite element method simulations, ITO and Ti based heaters are compared for different cladding configurations and TE and TM polarizations. Furthermore, the proposed ITO based microheaters have also been fabricated using the optimum gap and cladding configuration. Experimental results show power consumption to achieve a pi phase shift of 10 mW and switching time of a few microseconds for a 50 mu m long ITO heater. The obtained results demonstrate the potential of using ITO as an ultra-low loss microheater for high performance silicon thermo-optic tuning and open an alternative way for enabling the large-scale integration of phase shifters required in emerging integrated photonic applications. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, Ministerio de Economía y Competitividad (TEC2016-76849); Generalitat Valenciana (PROMETEO/2019/123); Ministerio de Ciencia, Innovación y Universidades (FPU17/04224).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Non-volatile epsilon-near-zero readout memory

  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
  • Olivares-Sánchez-Mellado, Irene
  • Brimont, Antoine Christian Jacques
[EN] The lack of memory effect of silicon makes it unfeasible to store electronic data in photonics. Here we propose a nonvolatile readout photonic memory, which is electronically written/erased and optically read. The memory utilizes indium tin oxide as a floating gate and exploits its epsilon-near-zero regime and electro-optic activity. Extinction ratios greater than 10 dB in a bandwidth of 100 nm for a 5 mu m long memory are obtained. Furthermore, power consumption in the order of microwatts with retention times of about a decade have been predicted. The proposed structure opens a pathway for developing highly integrated electro-optic devices such as memory banks. (C) 2019 Optical Society of America., The authors thank Alba Vicente for her valuable comments. Ministerio de Economia y Competitividad (MINECO) (TEC2016-76849, TEC2017-92037-EXP); Ministerio de Educacion, Cultura y Deporte (MECD) (FPU17/04224); Universitat Politecnica de Valencia (UPV) (FPI-Irene Olivares).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Enhanced Pockels effect in strained silicon by means of a SiGe/Si/SiGe slot structure

  • Olivares-Sánchez-Mellado, Irene
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] A slot waveguide structure made of a SiGe/Si/SiGe heterojunction is proposed to enhance Pockels effect in strained silicon. The strain is applied via lattice mismatch between layers, while the slot configuration optimizes the overlap between the optical and electric field inside the strained silicon., Funding from projects TEC2016-76849 (MINECO/FEDER, UE) and PROMETEO/2019/123 (Generalitat Valenciana) is acknowledged. Irene Olivares acknowledges the UPV for funding her research staff training (FPI) grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultra-compact non-volatile Mach-Zehnder switch enabled by a high-mobility transparent conducting oxide

  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Ramos, Francisco|||0000-0003-1514-2792
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
  • Olivares-Sánchez-Mellado, Irene
[EN] Compact and broadband non-volatile silicon devices are mainly absorption based. Hence, access to low-loss non-volatile phase shifters is still a challenge. Here, this problem is addressed by using a high-mobility transparent conducting oxide such as cadmium oxide as a floating gate in a flash-like structure. This structure is integrated in a Mach¿Zehnder interferometer switch. Results show an active length of only 30 µm to achieve a ¿¿ phase shift. Furthermore, an extinction ratio of 20 dB and insertion loss as low as 1 dB may be attained. The device shows an optical broadband response and can be controlled with low-power pulses in the nanosecond range. These results open a new, to the best of our knowledge, way for enabling compact silicon-based phase shifters with non-volatile performance., Ministerio de Economia y Competitividad (TEC2016-76849); Generalitat Valenciana (PROMETEO/2019/123); Ministerio de Ciencia, Innovacion y Universidades (FPU17/04224).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Compact focusing grating couplers for silicon horizontal slot waveguides

  • Larrea-Luzuriaga, Roberto Alejandro
  • Gutiérrez Campo, Ana María
  • Ramirez, J. M.
  • Garrido, B.
  • Hurtado Montañés, Juan|||0000-0002-4870-7641
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
In this Letter, we present the design, simulation (2D and 3D), fabrication, and experimental characterization of compact and fully etched focusing gratings for a horizontal slot waveguide based on a silicon nitride layer sandwiched between amorphous silicon and a silicon-on-insulator. The measured coupling losses are about 4 dB with a 3 dB bandwidth of 38 nm. The fully etched configuration allows the fabrication in a single lithography step., Ministerio de Economia y Competitividad (MINECO) (TEC2012-38540-C02-02, TEC2016-76849-C2-2-R); Generalitat Valenciana (NANOMET PLUS -PROMETEOII/2014/034).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Resistive switching and charge transport mechanisms in ITO/ZnO/p-Si devices

  • Blázquez, O.
  • Frieiro, J.L.
  • López-Vidrier, J.
  • Guillaume, C.
  • Portier, X.
  • Labbé, C.
  • Hernández, S.
  • Garrido, B.
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The resistive switching properties of ITO/ZnO/p-Si devices have been studied, which present well-defined resistance states with more than five orders of magnitude difference in current. Both the high resistance state (HRS) and the low resistance state (LRS) were induced by either sweeping or pulsing the voltage, observing some differences in the HRS. Finally, the charge transport mechanisms dominating the pristine, HRS, and LRS states have been analyzed in depth, and the obtained structural parameters suggest a partial re-oxidation of the conductive nanofilaments and a reduction of the effective conductive area., This work was financially supported by the Spanish Ministry of Economy and Competitiveness (Project Nos. TEC2012-38540-C02-01 and TEC2016-76849-C2-1-R). O.B. also acknowledges the subprogram "Ayudas para Contratos Predoctorales para la Formacion de Doctores" of the Spanish Ministry of Economy and Competitiveness for economical support. X.P., C.L., and C.G. are grateful to C. Frilay for his expertise in the maintenance of the sputtering kit used for the growth of the ZnO films.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optical switching in hybrid VO2/Si waveguides thermally triggered by lateral microheaters

  • Olivares-Sánchez-Mellado, Irene
  • Sánchez Diana, Luis David
  • Larrea-Luzuriaga, Roberto Alejandro
  • Menghini, Mariela
  • Homm, Pia
  • Jang, Lee-Woon
  • van Bilzen, Bart
  • Seo, Jin Won
  • Locquet, Jean-Pierre
  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Griol Barres, Amadeu
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The performance of optical devices relying in vanadium dioxide (VO2) technology compatible with the silicon platform depends on the polarization of light and VO2 properties. In this work, optical switching in hybrid VO2/Si waveguides thermally triggered by lateral microheaters is achieved with insertion losses below 1 dB and extinction ratios above 20 dB in a broad bandwidth larger than 30 nm. The optical switching response has been optimized for TE and TM polarizations by using a homogeneous and a granular VO2 layer, respectively, with a small impact on the electrical power consumption. The stability and reversibility between switching states showing the possibility of bistable performance is also demonstrated. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement., Funding from project TEC2016-76849 (MINECO/FEDER, UE) is acknowledged. The SOI samples were fabricated at IHP (we acknowledge Lars Zimmermann) in the framework of FP7-ICT-2013-11-619456 SITOGA project. Irene Olivares and Roberto Larrea also acknowledge respectively the Universitat Politecnica de Valencia and the Ecuadorian Government for funding their grant. P.H. acknowledges support from Becas Chile-CONICYT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design method for high performance grating couplers in photonic integrated circuits

  • Larrea-Luzuriaga, Roberto Alejandro
  • Gutierrez Campo, Ana Maria
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The optimization of grating couplers is usually realized by multiple simulations using specific computational software for this task. Many grating parameters must be analyzed and designed to get the maximum coupling efficiency and the transmission spectrum centred at the wavelength of operation. However, these simulations may take a long time and consume high computational resources depending on the simulation resolution. This work is focused on finding a method to optimize the grating parameters with the lowest number of simulations. In this way, closed-form expressions are presented to get the optimal values for the period and fill-factor, which are the main parameters in the grating design. The usefulness of the proposed approach is shown for the design of silicon grating couplers operating at 1.31 ¿m and 1.55 ¿m and both TE and TM polarizations., Funding from Project TEC2016-76849 (MINECO/FEDER, UE) is acknowledged. Roberto Larrea also acknowledges the Ecuadorian Government for Funding his Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

All-Optical Hybrid VO2/Si Waveguide Absorption Switch at Telecommunication Wavelengths

  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Ivanova-Angelova, Todora|||0000-0002-8150-4133
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
  • Menghini, Mariela
  • Homm, Pía
  • Locquet, Jean-Pierre
[EN] Vanadium dioxide (VO2) is one of the most promising materials for developing hybrid photonic integrated circuits (PICs). At telecommunication wavelengths, VO2 exhibits a large change on the refractive index (¿n ~ 1 and ¿¿ ~ 2.5) between its insulating and metallic state. Such insulating-to-metal transition (IMT) can be triggered by light, which could enable all-optical hybridVO2-waveguide devices. Here, we experimentally demonstrate an all-optical absorption switch using a hybridVO2/Si waveguide fully compatible with the silicon photonics platform. All-optical characterization was carried out for TE polarization and at telecommunication wavelengths using an in-plane approach. The temporal dynamics were retrieved by means of pump-probe measurements. Our results show an extinction ratio of 0.7 dB/¿m with a maximum switchable length of 15 ¿m, a switching speed as low as 318 ns, and an energy per switch of 15.8 nJ. The inherit large optical bandwith of a non-resonant waveguide poses this device as a promising candidate for developing all-optical and broadband silicon PICs., This work was supported by Ministerio de Economia y Competitividad (MINECO) under Grant TEC2016-76849; in part by Ministerio de Ciencia e Innovacion underGrant PID2019-111460GB-I00 and Grant FPU17/04224; and in part by Generalitat Valenciana under Grant PROMETEO/2019/123.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental demonstration of a tunable transverse electric pass polarizer based on hybrid VO2/silicon technology

  • Sánchez Diana, Luis David
  • Olivares-Sánchez-Mellado, Irene
  • Menghini, Mariela
  • Homm, Pia
  • Locquet, Jean-Pierre
  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] A tunable transverse electric (TE) pass polarizer is demonstrated based on hybrid vanadium dioxide/silicon (VO2/Si) technology. The 20-mu m-long TE pass polarizer exploits the phase transition of the active VO2 material to control the rejection of the unwanted transverse magnetic (TM) polarization. The device features insertion losses below 1 dB at static conditions and insertion losses of 5.5 dB and an attenuation of TM polarization of 19 dB in the active state for a wavelength range between 1540 nm and 1570 nm. To the best of our knowledge, this is the first time that tunable polarizers compatible with Si photonics are demonstrated. (C) 2018 Optical Society of America, Ministerio de Economia y Competitividad (MINECO) (TEC2016-76849); European Commission (EC) [PHRESCO (688579), SITOGA (619456)]; Universitat Politecnica de Valencia; Comision Nacional de Investigacion Cientifica y Tecnologica (CONICYT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Non-Volatile Photonic Memory Based on a SAHAS Configuration

  • Olivares-Sánchez-Mellado, Irene
  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The non-volatile memory is a crucial functionality for a wide range of applications in photonic integrated circuits, however, it still poses a challenge in silicon photonic technology. This problem has been overcome in the microelectronic industry by using SONOS (silicon-oxide-nitride-oxide-silicon) memory cells, in which the non-volatility is enabled by a dielectric trapping layer such as silicon nitride. Analogously, in this work, a similar approach in which the nitride has been replaced by a hafnium oxide layer, named as SAHAS configuration, is proposed for enabling a programmable erasable photonic memory fully compatible with the silicon platform. The structure features an efficient performance with writing and erasing times of 100 mu s, retention times over 10 years and energy consumption in the pJ range, which improve the current SONOS or floating gate based photonic approaches that exploit the plasma dispersion effect in silicon. The proposed non-volatile photonic memory device shows an extinction ratio above 12 dB and insertion losses below 1 dB in a compact footprint. In addition, because the memory is optically read, ultrafast access times in the picosecond range are also achieved., This work was supported in part by Ministerio de Economia y Competitividad (MINECO/FEDER, UE) (TEC2016-76849), in part by Generalitat Valenciana (PROMETEO/2019/123), in part by Ministerio de Ciencia e Innovacion (MINECO/FEDER, UE) (PID2019-111460GB-I00, FPU17/04224), and in part by Universitat Politecnica de Valencia (FPI Grant).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancing Pockels effect in strained silicon waveguides

  • Olivares-Sánchez-Mellado, Irene
  • Brimont, Antoine Christian Jacques
  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The magnitude and origin of the electro-optic measurements in strained silicon devices has been lately the object of a great controversy. Furthermore, recent works underline the importance of the masking effect of free carriers in strained waveguides and the low interaction between the mode and the highly strained areas. In the present work, the use of a p-i-n junction and an asymmetric cladding is proposed to eliminate the unwanted carrier influence and improve the electro-optical modulation response. The proposed configuration enhances the effective refractive index due to the strain-induced Pockels effect in more than two orders of magnitude with respect to the usual configuration. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, Ministerio de Economía y Competitividad (MINECO/FEDER, UE) (TEC2016-76849); Universitat Politècnica de València (FPI-Irene Olivares); Ministerio de Educación, Cultura y Deporte (FPU17/04224); Generalitat Valenciana. Irene Olivares and Jorge Parra acknowledges the Universitat Politècnica de València and Generalitat Valenciana, respectively, for funding their research staff training (FPI) grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of the external resistance on the switching power consumption in VO2 nano gap junctions

  • Sánchez Diana, Luis David
  • Rosa Escutia, Álvaro
  • Gutierrez Campo, Ana Maria
  • Homm, Pia
  • Van Bilzen, Bart
  • Menghini, Mariela
  • Locquet, Jean-Pierre
  • Griol Barres, Amadeu
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The influence of an external resistance on the performance of VO2 nanogap junctions is analyzed and experimentally characterized. The current-voltage response shows the reversible metal-insulator transition typical of VO2 based devices. When reaching the metallic state, the current through the VO2 junction is abruptly increased, which may result in electrical contact damage. Therefore, an external resistance in series with the VO2 junction is usually employed to limit the maximum current through the device. Our results indicate that the external resistance plays a key role in the switching power consumption showing an optimum value, which depends on the dimensions of the VO2 junction. In such a way, power consumption reductions up to 90% have been demonstrated by selecting the optimum external resistance value., This work was supported by the European Commission under Project No. FP7-ICT-2013-11-619456 SITOGA. Financial support from TEC2016-76849-C2-2-R and NANOMET Conselleria de Educacio, Cultura i Esport-PROMETEOII/2014 034 is also acknowledged. P.H. acknowledges support from Becas Chile-CONICYT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

VO2 nanophotonics

  • Cueff, Sébastien
  • John, Jimmy
  • Zhang, Zhen
  • Sun, Jianing
  • Orobtchouk, Regis
  • Ramanathan, Shriram
  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The intriguing physics of vanadium dioxide (VO2) makes it not only a fascinating object of study for fundamental research on solid-state physics but also an attractive means to actively modify the properties of integrated devices. In particular, the exceptionally large complex refractive index variation produced by the insulator-to-metal transition of this material opens up interesting opportunities to dynamically tune optical systems. This Perspective reviews some of the exciting work done on VO2 for nanophotonics in the last decade and suggests promising directions to explore for this burgeoning field., S.C. acknowledges funding from the French National Research Agency (ANR) under the project SNAPSHOT (Grant No. ANR-16-CE24-0004). Z.Z. and S.R. acknowledge AFOSR (Grant No. FA9550-18-1-0250) for support. P.S. acknowledges Generalitat Valenciana (No. PROMETEO/2019/123), Ministerio de Economia y Competitividad (MINECO/FEDER, UE) (No. TEC2016-76849) and Ministerio de Ciencia e Innovacion (MINECO/FEDER, UE) (No. PID2019-111460GB-I00). J.P. acknowledges the Ministerio de Ciencia, Innovacion y Universidades for his grant (Grant No. FPU17/04224). We thank M. Kats for fruitful discussions and feedback on the manuscript.