Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving the properties of Cu2O/ZnO heterojunction for photovoltaic application by graphene oxide

  • Rosas-Laverde, Nelly Maria
  • Pruna, Alina Iuliana|||0000-0002-5250-066X
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
  • Marí, B.|||0000-0003-0001-419X
  • Cembrero Cil, Jesús
  • Salas Vicente, Fidel|||0000-0003-0834-4425
  • Orozco-Messana, Javier|||0000-0001-8611-8816
[EN] A p-Cu2O/n-ZnO heterojunction grown on fluorine-doped tin oxide (FTO) substrate is reported by a combined low-cost approach employing tape-casting of ZnO layer and subsequent electrochemical deposition of Cu2O layer. Graphene oxide (GO) nanosheets were employed as nanofiller for the ZnO matrix. Moreover, a ZnO buffer layer was inserted at the interface between the Cu2O and ZnO layers. The morphological, structural and photoelectrical characteristics of these heterojunction layers were investigated by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Raman spectroscopy and photoelectrical current-voltage measurements. The results confirmed that the morphology and structure of ZnO layer were affected by the incorporation of GO nanosheets while the presence of buffer layer influenced the growth of Cu2O layer. This work shows the addition of GO and the use of ZnO buffer layer represent a viable approach towards improving the photoelectrical properties of the Cu2O/ZnO heterojunction cell., Financial support from Escuela Politecnica Nacional, Ecuador (project number PIMI 15-09) and Secretaria de Education Superior, Ciencia, Tecnologia e Innovation (SENESCYT) and Romanian National Authority for Scientific Research and Innovation, Romania CNCS - UEFISCDI (project number PN-III-P1-1.1-TE-2016-1544) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving Electrochemical Properties of Polypyrrole Coatings by Graphene Oxide and Carbon Nanotubes

  • Rosas-Laverde, Nelly Maria
  • Pruna, Alina Iuliana|||0000-0002-5250-066X
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
[EN] Nanostructured polypyrrole coating was applied on carbon paper via simple dip-coating and electrochemical approach. Hybridization with nanocarbon materials (graphene oxide (GO) and multi-walled carbon nanotubes (MWCNTs)) and their effect as an anchoring hybrid layer for the growth of polypyrrole towards improving electrochemical properties are studied. The loading of each component and their w/w ratio were evaluated. Fourier transform infrared spectroscopy, field emission scanning electron microscopy, and Raman spectroscopy were employed to characterize the properties of the coatings. The electrochemical properties were investigated by cyclic voltammetry. The results indicated the electrodeposition of polypyrrole is enhanced by the addition of MWCNTs to the GO layer due to the formation of a hierarchical network. The electrochemical performance of the modified electrode was shown to be highly dependent on the employed w/w ratio, reaching a capacitance value of about 40 mF cm-2 for a carbon paper substrate modified with GO:MWCNT in a w/w ratio of 1:2.5 and PPy layer deposited by cyclic voltammetry for 30 cycles. The contribution to total stored charge was found to be primary from the inner capacitance component of about 95.5% contribution., This research was founded by Romanian National Authority for Scientific Research and Innovation, CNCS -UEFISCDI (project number PN-III-P1-1.1-TE-2016-1544) and Escuela Politecnica Nacional (project number PIMI 15-09) and Secretaria de Educacion Superior, Ciencia, Tecnologia e Innovacion (SENESCYT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance of graphene oxide-modified electrodeposited ZnO/Cu2O heterojunction solar cells, Rendimiento de las celdas solares de heterounión ZnO/Cu2O modificadas con óxido de grafeno

  • Rosas-Laverde, Nelly Maria
  • Pruna, Alina Iuliana|||0000-0002-5250-066X
  • Cembrero Cil, Jesús
  • Orozco-Messana, Javier|||0000-0001-8611-8816
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] We report the fabrication of ZnO/Cu2O heterojunction solar cells by means of the electrodeposition technique. The effect of electrolyte medium for the ZnO deposition, annealing treatment and interface modification with graphene oxide (GO) layer on the photoelectrical properties was analyzed. The electrochemical results indicated a markedly dependent Cu2O film electrodeposition on the GO-modified ZnO films. The modification of ZnO/Cu2O interface with GO nanosheets and annealing treatment results in improved interface properties, varying morphology and defects in ZnO lattice that further lead to enhanced performance of the proposed heterojunction solar cells. While the obtained results indicate that the properties of GO coating need to be tailored for improved performance, a synergetic effect of the GO addition and annealing treatment on the photoelectric properties of the electrodeposited heterojunction is achieved. (C) 2019 SECV. Published by Elsevier Espana, S.L.U., [ES] Se presenta la fabricación de celdas solares de heterounión de ZnO/Cu2O obtenidas mediante la técnica de electrodeposición. Se analizó el efecto del electrolito utilizado para la deposición de ZnO, el tratamiento térmico aplicado y la modificación de la interfaz con una capa de óxido de grafeno (GO) sobre las propiedades fotoeléctricas. Los resultados electroquímicos indicaron que existe una marcada dependencia de electrodeposición de capa de Cu2O sobre las películas de ZnO modificadas con GO. La modificación de la interfaz ZnO/Cu2O con nanohojas de GO y el tratamiento térmico dan como resultado mejoras en las propiedades de la interfaz, una morfología variable y defectos en la red de ZnO que conducen a un mejor rendimiento de las celdas solares de heterounión propuestas. Si bien los resultados obtenidos indican que las propiedades del recubrimiento de GO deben adaptarse para mejorar el rendimiento, se logra un efecto sinérgico del tratamiento de adición y térmico de GO aplicados sobre las propiedades fotoeléctricas de la heterounión electrodepositada., Financial support from Escuela Politécnica Nacional (project number PIMI 15-09), Secretaría de Educación Superior, Ciencia, Tecnología e Innovación (SENESCYT) of Ecuador, Romanian National Authority for Scientific Research and Innovation CNCS ¿ UEFISCDI (project number PN-III-P1-1.1-TE-2016-1544), Spanish government MINECO (projects MAT2016-75586-C4-2-P and MAT2015-71070-REDC) and from Generalitat Valenciana (project PROMETEO 2018/123 ¿ EFIMAT) is gratefully acknowledged. In addition, authors would like to thank to the Microscopy Service of UPV and Dr. David Busquets-Mataix for useful advice.