Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of advanced (S)TEM methods for the study of nanostructured porous functional surfaces: A few working examples

  • Santos, A.J.
  • Lacroix, B.
  • Maudet, F.
  • Paumier, F.
  • Hurand,S.
  • Dupeyrat, C.
  • Huffaker, D.L.
  • Girardeau, T.
  • García, R.
  • Morales, F.M.
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
[EN] Nanostructured films offer the ability of modifying surface properties, even more, when they can generate layers with controlled porosity. The lower implicit integrity of these (multi)layers when compared to their compact counterparts, hinders the attainment of electron-transparent sections of submicron thicknesses (lamellae), which becomes one of the main reason for the scarcity of studies thorough (scanning-)transmission electron microscopy ((S)TEM). Aware of this opportunity, this report provides an overview of the possibilities offered by the application of a variety of (S)TEM techniques for the study of nanostructured and porous photonic surfaces. A few working examples are presented to illustrate the type of information that can be obtained in the case of mesoporous films prepared either by at oblique angles physical processes as well as nitride nanowire arrays prepared by epitaxy methods. It will be demonstrated that this approach enables the realization of several pioneering works, which are essential to complete the characterization of such porosity-controlled coatings. Topics as diverse as the preparation of electron-transparent specimens and the advanced characterization of their structures, morphologies, interfaces and compositions are addressed thanks to the implementation of new breakthroughs in (S)TEM, which allow to obtain high-resolution imaging, spectroscopies, or tomography, at both microscopic and nanoscopic levels. Finally, establishing (S)TEM as a reference tool for the advanced structural, chemical and morphological characterization of porous nanostructured skins, will open new horizons, providing better and new insights and thus allowing the optimization of the fabrication and design of such architectures., The authors would like to express their gratitude to Ellen Backen, applications scientist from Thermo Fisher Scientific, for the FIB samples prepared at the Scios 2 HiVac system at Nanoport (Eindhoven) . A. J. Santos would like to thank the IMEYMAT Institute and the Spanish Ministerio de Educacion y Cultura for the concessions of grants (ICARO-173873 and FPU16-04386) . The "Talent Attraction Program" of the University of Cadiz is acknowledged by supporting B. Lacroix contract code E-11-2017-0117214. University of Cadiz and IMEYMAT are also agreed by financing the mutual facilities available at the UCA R&D Central Services (SC-ICYT) , the UCA project reference "PUENTE PR2018-040", and the IMEYMAT project references "AGREGADOR 2018-1" and "LINEAS PRIORITARIAS PLP2019120-3". The authors would like to acknowledge the financial support provided by Ser Cymru National Research Network in Advanced Engineering and Materials. This work was also partly carried out in the framework of the associate laboratory PRIMEO ("Partnership for Research and Innovation in Emerging Materials for phOtonics") between Safran Electronics & De-fense and PPRIME Institute. It benefited from the partial support of the DGA (Direction Generale de l'Armement, the French Defense Procure-ment Agency) , the "Nouvelle Aquitaine" Region and the European Structural and Investment Funds (ERDF reference P-2016 BAFE-209): IMATOP project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Porosity Control for Plasma-Assisted Molecular Beam Epitaxy of GaN Nanowires

  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Santos, Antonio J.
  • Blanco, Eduardo
  • Lacroix, Bertrand
  • García, Rafael
  • Huffaker, Diana L.
  • Morales, Francisco M.
[EN] We report on the bottom-up fabrication, by plasma-assisted molecular beam epitaxy, of monocrystalline GaN solid, hollow, and c-shape nanowires deposited in a compact fashion. The shape exhibited by these nanostructures varies from solid to c-shape and hollow nanowires. They were epitaxially grown with their [0001] directions perpendicular with respect to different surfaces of Si substrates. Advanced studies of these GaN nanostructures were carried out by means of selected-area electron diffraction and scanning and high-resolution transmission electron microscopy evidencing their structure and epitaxial alignments with respect to the silicon. Through a comprehensive analysis of the growth conditions (substrate temperature and Ga and N* fluxes) we demonstrate that a local Ga-limited regime is the mechanism behind the particular shape of these nanostructures. Additionally, spectroscopic ellipsometry studies, applying a model based on Bruggeman effective medium approximations and taking into account several aspects related to the nature of these GaN nanostructures, were carried out to obtain valuable information about the evolution of the optical constants and the porosity along the layer. This work shows a way to control the porosity and shape of GaN nanowires by varying the growth conditions, which could open new horizons in the development of GaN nanostructures for future applications., The authors would like to acknowledge the financial support provided by Ser Cymru National Research Network in Advanced Engineering and Materials. V.J.G. acknowledge Dr. P. Caroff and Dr. M. Kesaria for fruitful discussions. AJ.S. would like to thank the IMEYMAT Institute and the Spanish Ministerio de Education y Cultura for the concessions of grants (ICARO-173873 and FPU16-04386). The "Talent Attraction Program" of the University of Cadiz is acknowledged by supporting B.L., contract code E-11-2017-0117214. University of Cadiz and IMEYMAT are also acknowledged for financing the mutual facilities available at the UCA R&D Central Services (SC-ICYT), the UCA project reference "PUENTE PR2018-040", and the IMEYMAT project reference "AGREGADOR 2018-1".