Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Numerical modelling of hip fracture patterns in human femur

  • Larrainzar Garijo, Ricardo
Background and objective: Hip fracture morphology is an important factor determining the ulterior surgical repair and treatment, because of the dependence of the treatment on fracture morphology. Although numerical modelling can be a valuable tool for fracture prediction, the simulation of femur fracture is not simple due to the complexity of bone architecture and the numerical techniques required for simulation of crack propagation. Numerical models assuming homogeneous fracture mechanical properties commonly fail in the prediction of fracture patterns. This paper focuses on the prediction of femur fracture based on the development of a finite element model able to simulate the generation of long crack paths. Methods: The finite element model developed in this work demonstrates the capability of predicting fracture patterns under stance loading configuration, allowing the distinction between the main fracture paths: intracapsular and extracapsular fractures. It is worth noting the prediction of different fracture patterns for the same loading conditions, as observed during experimental tests. Results and conclusions: The internal distribution of bone mineral density and femur geometry strongly influences the femur fracture morphology and fracture load. Experimental fracture paths have been analysed by means of micro-computed tomography allowing the comparison of predicted and experimental crack surfaces, confirming the good accuracy of the numerical model.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Comparación de los umbrales de fractura biomecánica de los tejidos de la cabeza humana mediante un modelo de elementos finitos

  • Lozano-Mínguez, Estívaliz|||0000-0003-4576-826X
  • Rupérez Moreno, María José|||0000-0001-8457-7963
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Palomar-Toledano, Marta
[ES] Anualmente se producen un gran número de muertes y discapacidades permanentes a consecuencia de traumatismos craneoencefálicos. Al no poderse realizar ensayos in vivo para conocer los mecanismos de desarrollo de estas lesiones, las simulaciones numéricas son una herramienta clave en el estudio de éstas. La precisión de los modelos numéricos depende en gran medida de la correcta definición de las ecuaciones constitutivas y de los modelos de daño. Sin embargo, en la literatura se encuentra gran dispersión en los modelos empleados, así como en los valores de las propiedades biomecánicas. Por tanto, el objetivo principal de esta investigación era realizar una revisión y comparación de los modelos y las propiedades empleadas en la literatura, mediante un nuevo modelo de elementos finitos (EF) calibrado con ensayos experimentales de cadáveres, para discernir aquellos que proporcionan una respuesta más cercana a los resultados empíricos. Los valores umbral del cráneo y del cuero cabelludo que conducen a la fractura han sido estudiados y seleccionados. Se ha observado que el hueso compacto es crítico en la fractura del cráneo pero que no es el único parámetro que influye en ésta., Los autores agradecen el apoyo financiero recibido del Ministerio de Economía y Competitividad y los Fondos FEDER a través del proyecto RTC-2015-3887-8. También se reconoce el apoyo de la Generalitat Valenciana a través del programa PROMETEO 2016/007
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Relevant factors in the design of composite ballistic helmets

  • Palomar-Toledano, Marta
  • Rodriguez-Millán, Marcos
  • Miguélez, María Henar
  • Lozano-Mínguez, Estívaliz|||0000-0003-4576-826X
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] In this paper, the design methodology of composite ballistic helmets has been enhanced considering biomechanical requirements by means of finite element analysis. Modern combat helmets lead to a new type of non-penetrating injury, the Behind Helmet Blunt Trauma (BHBT), generated by the deformation of the inner face of the helmet, the so-called backface deformation (BFD). Current standard testing methodologies use BFD as the main measure in ballistic testing. Nonetheless, this work discusses the relationship between this mechanical parameter and the head trauma (BHBT) by studying different head injury criteria. A numerical model consisting of a helmet and a human head is developed and validated with experimental data from literature. The consequences of non-penetrating high-speed ballistic impacts upon the human head protected by an aramid combat helmet are analysed, concluding that the existing testing methodologies fail to predict many types of head injuries. The influence of other parameters like bullet velocity or head dimensions is analysed. Usually, a single-sized helmet shell is manufactured and the different sizes are adjusted by varying the foam pad thickness. However, one of the conclusions of this work is that pad thickness is critical to avoid BHBT and must be considered in the design process., The authors thank the financial support received from the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Regional Development Fund (ERDF-FEDER) through the project RTC-2015-3887-8, and from the Conselleria d'Educació, Investigació, Cultura i Esport of the Generalitat Valenciana through the program PROMETEO 2016/007.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical modelling of femur fracture and experimental validation using bone simulant

  • Marco, Miguel
  • Larraínzar, Ricardo
  • Caeiro, José Ramón
  • Miguélez, María Henar
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Bone fracture pattern prediction is still a challenge and an active field of research. The main goal of this article is to present a combined methodology (experimental and numerical) for femur fracture onset analysis. Experimental work includes the characterization of the mechanical properties and fracture testing on a bone simulant. The numerical work focuses on the development of a model whose material properties are provided by the characterization tests. The fracture location and the early stages of the crack propagation are modelled using the extended finite element method and the model is validated by fracture tests developed in the experimental work. It is shown that the accuracy of the numerical results strongly depends on a proper bone behaviour characterization., The authors gratefully acknowledge the funding support received from the Spanish Ministry of Economy and Competitiveness and the FEDER operation program for funding the Projects DPI2013-46641-R, RTC-2015-3887-8 and the Generalitat Valenciana through the Project Prometeo/2016/007.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelling of femur fracture using finite element procedures

  • Marco, Miguel
  • Larraínzar, Ricardo
  • Caeiro, José Ramón
  • Miguélez, María Henar
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] During the last decades human femur fracture has been mainly analysed using an experimental approach focused on cadaveric or synthetic bones. Nowadays, advances in computational technologies allow using numerical methods, such as the finite element method for femur fracture analysis. However, fracture morphology has been scarcely studied using numerical methods despite the interest of this study due to the different clinical treatment required for each fracture type. In this work, different fracture modelling techniques have been analysed with the objective of predicting a realistic fracture path, which in the literature is often limited to the initial steps of fracture. The main goal of this article is to compare different numerical approaches and to provide a robust methodology for femur fracture simulation. Experimental work was carried out on a synthetic femur in order to validate the numerical models. Through this validation we verified that some numerical methods present convergence problems, and they are not useful to model long crack paths. The best results are obtained by simulating the crack growth by a local material property degradation applied through successive analyses. This technique has been applied to a real human femur, obtaining accurate results in fracture morphology prediction., The authors are indebted to the Universidad Complutense de Madrid and Hospital Universitario Infanta Leonor for the support in the scanning and the testing human femur. The authors gratefully acknowledge the funding support received from the Spanish Ministry of Economy and Competitiveness and the FEDER operation program for funding the projects DPI2017-89197-C2-2-R, RTC-2015-3887-8 and the Generalitat Valenciana through the project Prometeo 2016/007.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A heterogeneous orientation criterion for crack modelling in cortical bone using a phantom-node approach

  • Marco, Miguel
  • Miguélez, María Henar
  • Belda Ricardo|||0000-0003-3913-5773
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Cortical bone can be considered as a heterogeneous composite at microscopic scale, composed of osteons that act as reinforcement fibres embedded in interstitial matrix. Cement lines constitute the interface between osteons and matrix, and they often behave as the weakest links along which microcracks tend to propagate. However, current simulations of crack growth using XFEM combined with usual orientation criteria as implemented in commercial codes do not capture this behaviour: they predict crack paths that do not follow the cement lines surrounding osteons. The reason is that the orientation criterion used in the implementation of XFEM does not take into account the heterogeneity of the material, leading to simulations that differ from experimental results. In this work, a crack orientation criterion for heterogeneous materials based on interface damage prediction in composites is proposed and a phantom node approach has been implemented to model crack propagation. The method has been validated by means of linear elastic fracture mechanics (LEFM) problems obtaining accurate results. The procedure is applied to different problems including several osteons with simplified geometry and an experimental test reported in the literature leading to satisfactory predictions of crack paths., The authors gratefully acknowledge the funding support received from the Spanish Ministry of Economy and Competitiveness and the FEDER operation program in the framework of the projects DPI2013-46641-R, DPI2017-89197-C2 and RTC-2015-3887-8 and also from the Generalitat Valenciana through the Programme PROMETEO 2016/007.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of mechanical properties of human head tissues for trauma modelling

  • Lozano-Mínguez, Estívaliz|||0000-0003-4576-826X
  • Rupérez Moreno, María José|||0000-0001-8457-7963
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
  • Palomar-Toledano, Marta
  • Infante, Diego
[EN] Many discrepancies are found in the literature regarding the damage and constitutive models for head tissues as well as the values of the constants involved in the constitutive equations. Their proper definition is required for consistent numerical model performance when predicting human head behaviour, and hence skull fracture and brain damage. The objective of this research is to perform a critical review of constitutive models and damage indicators describing human head tissue response under impact loading. A 3D finite element human head model has been generated by using computed tomography images, which has been validated through the comparison to experimental data in the literature. The threshold values of the skull and the scalp that lead to fracture have been analysed. We conclude that (1) compact bone properties are critical in skull fracture, (2) the elastic constants of the cerebrospinal fluid affect the intracranial pressure distribution, and (3) the consideration of brain tissue as a nearly incompressible solid with a high (but not complete) water content offers pressure responses consistent with the experimental data., Generalitat Valenciana, Grant/Award Number: PROMETEO 2016/007; Ministerio de Economia y Compatitividad and Fondo Europeo de Desarrollo Regional, Grant/Award Number: RTC-2015-3887-8
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical modelling of hip fracture patterns in human femur

  • Marco, Miguel
  • Caeiro-Rey, Jose Ramon
  • Miguélez, María Henar
  • Larrainzar-Garijo, Ricardo
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Background and Objective: Hip fracture morphology is an important factor determining the ulterior surgical repair and treatment, because of the dependence of the treatment on fracture morphology. Although numerical modelling can be a valuable tool for fracture prediction, the simulation of femur fracture is not simple due to the complexity of bone architecture and the numerical techniques required for simulation of crack propagation. Numerical models assuming homogeneous fracture mechanical properties commonly fail in the prediction of fracture patterns. This paper focuses on the prediction of femur fracture based on the development of a finite element model able to simulate the generation of long crack paths. Methods: The finite element model developed in this work demonstrates the capability of predicting fracture patterns under stance loading configuration, allowing the distinction between the main fracture paths: intracapsular and extracapsular fractures. It is worth noting the prediction of different fracture patterns for the same loading conditions, as observed during experimental tests. Results and conclusions: The internal distribution of bone mineral density and femur geometry strongly influences the femur fracture morphology and fracture load. Experimental fracture paths have been analysed by means of micro-computed tomography allowing the comparison of predicted and experimental crack surfaces, confirming the good accuracy of the numerical model., The authors are indebted to University Complutense of Madrid and to the radiological team of the Hospital Universitario Infanta Leonor for supporting the experimental work on human bones included in this paper. The micro-CTs were performed in the Micro-Computed Tomography laboratory at CENIEH facilities with the collaboration of CENIEH staff. The authors gratefully acknowledge the funding support received from the Spanish Ministry of Economy and Competitiveness and the FEDER operation program for funding the projects DPI2013-46641-R, DPI2017-89197-C2-1-R, DPI2017-89197-C2-2-R, RTC-2015-3887-8 and the Generalitat Valenciana through theproject Prometeo/2016/007. The authors also acknowledge the funding support received from the Fundacion Espanola de Investigacion Osea y del Metabolismo Mineral through the 2018 research fellowship program.
Docta Complutense
Publication Artículo científico (JournalArticle)

Numerical Modelling of Femur Fracture and Experimental Validation Using Bone Simulant

  • Marco, Miguel
  • Giner, Eugenio
  • Larrainzar Garijo, Ricardo
  • Caeiro, José Ramón
  • Miguélez, María Henar
Bone fracture pattern prediction is still a challenge and an active field of research. The main goal of this article is to present a combined methodology (experimental and numerical) for femur fracture onset analysis. Experimental work includes the characterization of the mechanical properties and fracture testing on a bone simulant. The numerical work focuses on the development of a model whose material properties are provided by the characterization tests. The fracture location and the early stages of the crack propagation are modelled using the extended finite element method and the model is validated by fracture tests developed in the experimental work. It is shown that the accuracy of the numerical results strongly depends on a proper bone behaviour characterization.