Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transformation of Organic Household Leftovers into a Peat Substitute

  • Hernández-Soto, Maria Consuelo
  • Hernández-Latorre, Marisa
  • Oliver-Tomás, Borja
  • Ponce, Estefanía
  • Renz, Michael|||0000-0002-1101-9562
[EN] A two-step procedure is described for the synthesis of a carbon material with a similar composition and properties as peat. The produced hydrochar is made suitable for agricultural applications by removing plant growing inhibitory substances. Wet household waste such as fruit peel, coffee grounds, inedible vegetable parts, or wet lignocellulosic material in general, are treated in presence of water at 215 degrees C and 21 bar in an autoclave, i.e., by hydrothermal carbonization. All these leftovers have a considerable water content of up to 90 weight % (wt%). Adding water extends the procedure to drier materials such as nutshells or even garden prunings and compostable polymers, i.e., the plastic bag for collection of the leftovers. Usually, the resulting carbon material, called hydrochar, produces a negative effect on plant growth when added to soil. It is supposed that this effect is caused by adsorbed phytotoxic compounds. A simple post-treatment under inert atmosphere (absence of oxygen) at 275 degrees C removes these substances. Therefore, the raw hydrochar is placed on a glass frit of a vertical tubular quartz reactor. A nitrogen gas flow is applied in down-flow direction. The tube is heated to the desired temperature by means of a heating mantle for up to one hour. The success of the thermal treatment is easily quantified by thermogravimetry (TG), carried out in air. A weight loss is determined when the temperature of 275 degrees C is reached, since volatile content is desorbed. Its amount is reduced in the final material, in comparison to the untreated hydrochar. The two-step treatment converts household leftovers, including compostable bags employed for their collection, into a carbon material that may serve as plant growth promoter and, at the same time, as a carbon sink for climate change mitigation., The Authors are grateful for the financial support received from the European Commission under the CharM and AdvCharM of the Climate-KIC Programme and from the Spanish Ministry of Science, Innovation and Universities under RTC-2017-6087-5 of the "Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad" Programme and under the Severo Ochoa program (SEV-2016-0683).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Methyl ketones from carboxylic acids as valuable target molecules in the biorefinery

  • Marie, Olivier
  • Ignatchenko, Alexey, V.
  • Renz, Michael|||0000-0002-1101-9562
[EN] For the preparation of methyl ketones, cross Ketonic Decarboxylation, i.e., the formation of a ketone from two different carboxylic acids, and the reketonization, i.e., the transformation of a carboxylic acid into a ketone employing a ketone as alkyl transfer agent, may be interesting alternatives to classical pathways involving metalorganic reagents. The fine chemical 2-undecanone was chosen as model compound and ketonic decarboxylation and reketonization evaluated by Green Chemistry matrices, namely the carbon atom efficiency and the e-factor. The efactor of the reaction of decanoic acid with acetic acid was less than five and, therewith, in the acceptable range for bulk chemicals, when valorizing acetone (e.g., as a solvent) and considering a 90% solvent recycling. The reketonization of decanoic acid with acetone provided a different main product, namely 10-nonadecanone, with a detrimental effect on atom efficiency. By means of labeling experiments it was shown that ketonic decarboxylation is significantly faster than the reketonization reaction. The transformation of acetic acid into acetone was studied by in-situ and operando IR spectroscopy. Thereby it was found that the surface was covered by acetic acid. The lack of adsorption of acetone is a clear drawback for the reketonization of carboxylic acids. To improve the reaction outcome, and therewith, its sustainability a possibility has to be found to stabilize the ketone molecules on the surface in the presence of carboxylic acids., Financial support from the Spanish Government is acknowledged (Ministry of Science, Innovation and Universities, RTC-2017-6087-5 and PGC2018-097277-B-I00). MR is grateful to the Generalitat Valenciana for a BEST-2015 fellowship and to Dilyana Mladenova, Arturo Valero Jim ' enez and Claudia Fern ' andez de la Pena for their contributions to the experimental work of the catalytic reactions.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Transformation of organic household leftovers into a peat substitute

  • Hernández-Soto, M.Consuelo
  • Hernández-Latorre, M
  • Oliver-Tomas, Borja
  • Ponce, E.
  • Renz, Michael
A two-step procedure is described for the synthesis of a carbon material with a similar composition and properties as peat. The produced hydrochar is made suitable for agricultural applications by removing plant growing inhibitory substances. Wet household waste such as fruit peel, coffee grounds, inedible vegetable parts, or wet lignocellulosic material in general, are treated in presence of water at 215 °C and 21 bar in an autoclave, i.e., by hydrothermal carbonization. All these leftovers have a considerable water content of up to 90 weight % (wt%). Adding water extends the procedure to drier materials such as nutshells or even garden prunings and compostable polymers, i.e., the plastic bag for collection of the leftovers. Usually, the resulting carbon material, called hydrochar, produces a negative effect on plant growth when added to soil. It is supposed that this effect is caused by adsorbed phytotoxic compounds. A simple post-treatment under inert atmosphere (absence of oxygen) at 275 °C removes these substances. Therefore, the raw hydrochar is placed on a glass frit of a vertical tubular quartz reactor. A nitrogen gas flow is applied in down-flow direction. The tube is heated to the desired temperature by means of a heating mantle for up to one hour. The success of the thermal treatment is easily quantified by thermogravimetry (TG), carried out in air. A weight loss is determined when the temperature of 275 °C is reached, since volatile content is desorbed. Its amount is reduced in the final material, in comparison to the untreated hydrochar. The two-step treatment converts household leftovers, including compostable bags employed for their collection, into a carbon material that may serve as plant growth promoter and, at the same time, as a carbon sink for climate change mitigation., The Authors are grateful for the financial support received from the European Commission under the CharM and AdvCharM of the Climate-KIC Programme and from the Spanish Ministry of Science, Innovation and Universities under RTC-2017-6087-5 of the “Investigación, Desarrollo e Innovacion Orientada a los Retos de la Sociedad” Programme and under the Severo Ochoa program (SEV-2016-0683).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Methyl ketones from carboxylic acids as valuable target molecules in the biorefinery

  • Marie, O.
  • Ignatchenko, A.V.
  • Renz, Michael
For the preparation of methyl ketones, cross Ketonic Decarboxylation, i.e., the formation of a ketone from two different carboxylic acids, and the reketonization, i.e., the transformation of a carboxylic acid into a ketone employing a ketone as alkyl transfer agent, may be interesting alternatives to classical pathways involving metal-organic reagents. The fine chemical 2-undecanone was chosen as model compound and ketonic decarboxylation and reketonization evaluated by Green Chemistry matrices, namely the carbon atom efficiency and the e-factor. The e-factor of the reaction of decanoic acid with acetic acid was less than five and, therewith, in the acceptable range for bulk chemicals, when valorizing acetone (e.g., as a solvent) and considering a 90% solvent recycling. The reketonization of decanoic acid with acetone provided a different main product, namely 10-nonadecanone, with a detrimental effect on atom efficiency. By means of labeling experiments it was shown that ketonic decarboxylation is significantly faster than the reketonization reaction. The transformation of acetic acid into acetone was studied by in-situ and operando IR spectroscopy. Thereby it was found that the surface was covered by acetic acid. The lack of adsorption of acetone is a clear drawback for the reketonization of carboxylic acids. To improve the reaction outcome, and therewith, its sustainability a possibility has to be found to stabilize the ketone molecules on the surface in the presence of carboxylic acids., Financial support from the Spanish Government is acknowledged (Ministry of Science, Innovation and Universities, RTC-2017-6087-5 and PGC2018-097277-B-I00). MR is grateful to the Generalitat Valenciana for a BEST-2015 fellowship and to Dilyana Mladenova, Arturo Valero Jiménez and Claudia Fernández de la Peña for their contributions to the experimental work of the catalytic reactions.