Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Non-invasive textural assessment of puffed corn cakes using air-coupled ultrasound

  • Sanchez-Jimenez, Virginia|||0000-0002-2075-0664
  • Giacomozzi, Anabella Soledad|||0000-0002-6528-3000
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Fariñas, Lola
  • Ginel, Alba
  • Gomez Alvarez-Arenas, Tomás Enrique
  • Garcia-Perez, Jose V.
[EN] This study aimed to evaluate the feasibility of using air-coupled ultrasound for the textural characterization of puffed corn cakes (PCC). For this purpose, air-coupled ultrasound measurements (0.15-0.4 MHz) were taken and instrumental texture, microstructural (Cryo-FESEM), moisture content and water activity analyses were performed on two different sets of PCC: 1) Seven commercial batches and 2) Four commercial batches stored at different relative humidities (10-40 %) in order to provoke slight changes in moisture content. The variation in the transmission coefficient modulus with the frequency (Delta CTf, dB/MHz) was the ultrasonic parameter chosen due to fact that the jagged surface of the PCC hindered an accurate estimation of the ultrasound velocity. Thus, Delta CTf was able to explain the PCC viscoelastic behaviour and correlated significantly (p < 0.05) with the PCC apparent hardness (R-2 = 0.89) for every batch analyzed. Delta CTf also permitted the computation of the increase in attenuation due to microstructural changes brought about by moisture adsorption., The authors acknowledge the financial support through the projects ULTRADIGITAL (AGROALNEXT/2022/045), which is part of the AGROALNEXT programme, supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana and the Projects RTC-2017-6314-2,3 funded by Ministerio de Ciencia, Innovacion y Universidades ¿ and Agencia Estatal de Investigacion¿ in Spain. The authors deeply acknowledge the support in this investigation from Cerealto Group.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of avocado textural changes during ripening by using contactless air-coupled ultrasound

  • Fernandez-Caballero-Fariñas, Maria Dolores
  • Díaz, Ricardo
  • Sanchez-Torres, E.A.|||0000-0003-4121-2459
  • Sanchez-Jimenez, Virginia|||0000-0002-2075-0664
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
[EN] In the present study, the use of the air-coupled ultrasonic technique has been analysed as a new tool for the contactless assessment of the avocado post-harvest textural modifications during ripening. Thus, ultrasonic parameters, such as maximum wave amplitude and ultrasound velocity, and textural ones, such as hardness, elastic modulus and relaxation capacity, were measured on avocado slices. During ripening, avocado reduced its elastic modulus (from 2.29 +/- 0.75 to 0.16 +/- 0.08 MPa), became softer and became more viscoelastic, which was well described from zero and first-order kinetic models. These changes increased ultrasound attenuation, decreasing the maximum amplitude of the ultrasonic signal (from 336.6 to 55.4 V/m), while the ultrasonic velocity remained constant, between 320.1 +/- 6.9 and 316.4 +/- 82.6 m/s. Thereby, the maximum ultrasonic amplitude, which adequately correlated with textural parameters (r(avg) = 0.85), could be used to assess the post-harvest ripening on avocado slices., The authors acknowledge the financial support from the Ministerio de Economia y Competitividad (MINECO) and Agencia Estatal de InvestigaciOn in Spain (Project RTC-2017-6314-2) and the Generalitat Valenciana. M.D. Farifias is grateful to the European Social Fund (ESF 2014-2020) and Generalitat Valenciana for her post-doctoral fellowship (APOSTD/2018/203). The author E.A. Sanchez-Torres acknowledges the support of the undergraduate student Sara Serrano Garcia on the experimental work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Use of air-coupled ultrasound for the non-invasive characterization of the textural properties of pork burger patties

  • Fernandez-Caballero-Fariñas, Maria Dolores
  • Contreras-Ruiz, Marina|||0000-0002-5107-5702
  • Sanchez-Jimenez, Virginia|||0000-0002-2075-0664
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
[EN] This study tests the feasibility of air-coupled ultrasound for the characterization of the textural properties of pork burger patties. The samples were prepared by mixing lard at different percentages (0, 20, 40, 60 and 80%) with a commercial burger meat mixture. Through-transmission airborne ultrasound measurements (250 kHz) were carried out at 5 and 20 degrees C. Ultrasonic velocity at 5 degrees C increased exponentially with fat content (r = 0.99), varying from 1587 to 1668 m/s, whereas it remained fairly constant at 20 degrees C (1644 to 1624 m/s). Ultrasonic attenuation decreased with fat content following an exponential pattern (r = 0.83 at 5 degrees C; r = 0.93 at 20 degrees C) and ranged from 62.6 to 44.8 Np/m at 5 degrees C, and from 76.7 to 42.2 Np/m at 20 degrees C. Noticeable correlations were found between hardness and ultrasonic velocity (r = 0.89 at 5 degrees C), and between Total Relaxation Capacity and ultrasonic attenuation (r = 0.89 at 5 degrees C; r = 0.99 at 20 degrees C). Additionally, airborne ultrasound allowed an accurate (mean relative difference 2.3%) prediction of burger thickness., This work was supported by the Agencia Estatal de Investigacion in Spain (Project RTC-2017-6314-2 & RTA 2017-00024-C04-03). M.D. Farinas is grateful for her post-doctoral "Juan de la Cierva" fellowship (FJCI-2017-34,759) through the program funded by the Spanish Ministry of Science, Innovation and Universities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of Textural Properties of Puffed Corn Cakes during Storage at Different Relative Humidity

  • Sanchez-Jimenez, Virginia|||0000-0002-2075-0664
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Gomez Alvarez-Arenas, Tomás E.
  • Rincón, Marta
[EN] Moisture adsorption is considered a critical factor during production and shelf-life of puffed corn cakes (PCC). This study aims to develop and validate an instrumental method and a mathematical model for the characterization of the textural modifications caused by the moisture adsorption in PCC. For that purpose, PCC were stored at different relative humidities to achieve a wide range of water activities (from 0.1 to 0.8 at 22 +/- 1 degrees C). A flexion-compression test was successfully validated in order to characterize the average textural properties of a PCC batch. A mathematical model considering consecutive elastic and plastic zones satisfactorily fitted (average VAR 99.65% and MRE 3.29%) the average stress-strain profiles of PCC and reported useful textural parameters, such as the deformability modulus (E), critical strain (epsilon(c)), and n curvature parameter. The structural modifications caused by moisture adsorption led to the reduction in E and n and the increase in epsilon(c). Even minor changes on the PCC moisture content involve remarkable modifications of the textural properties, which has to be considered for industry and retail distribution., This research was funded by "Ministerio de Ciencia, Innovacion y Universidades" and "Agencia Estatal de Investigacion" in Spain (RTC-2017-6314-2).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fast and non-destructive ultrasonic test for face masks

  • Gómez Álvarez-Arenas, Tomás
  • Fariñas, María Dolores
  • Ginel, Alba
As a consequence of the large demand of face masks due to the COVID19 pandemic, cheap, fast and non-destructive tests that can verify in-line the variability of the filtration capacities, prove the potential disinfection and/or evaluate the performance of new filtering materials are needed. Using two different approaches based on air-coupled ultrasounds (0.15–1.6 MHz) with equivalent results, this work shows that each face mask presents a distinctive ultrasonic signature that enables the classification and the evaluation of their performance. Moreover, it is shown that the ultrasonic propagation through the face masks and the main filter layers takes place through the pore space and that low frequency response of the attenuation and the velocity is highly dispersive and is dominated by the interaction between the air in the pores and the fibers in the filters. Hence, the parameters that describe ultrasonic velocity, attenuation and dispersion can be related with their filtration efficiency and breathability. These techniques are fully contactless, non-invasive and fast., This work was supported by: Spanish Agency of Science Technology and Research grant RTC-2017-6314-2 (TGAA, AG). Spanish Ministry of Science grant FJCI-2017-34759 (MDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessment of Textural Properties of Puffed Corn Cakes during Storage at Different Relative Humidity

  • Sánchez-Jiménez, Virginia
  • Gómez Álvarez-Arenas, Tomás
  • Rincón, Marta
  • Benedito, José
  • García-Pérez, José V.
15 páginas, 8 figuras, 1 tabla, Moisture adsorption is considered a critical factor during production and shelf-life of puffed corn cakes (PCC). This study aims to develop and validate an instrumental method and a mathematical model for the characterization of the textural modifications caused by the moisture adsorption in PCC. For that purpose, PCC were stored at different relative humidities to achieve a wide range of water activities (from 0.1 to 0.8 at 22 ± 1 °C). A flexion–compression test was successfully validated in order to characterize the average textural properties of a PCC batch. A mathematical model considering consecutive elastic and plastic zones satisfactorily fitted (average VAR 99.65% and MRE 3.29%) the average stress–strain profiles of PCC and reported useful textural parameters, such as the deformability modulus (E), critical strain (ε), and n curvature parameter. The structural modifications caused by moisture adsorption led to the reduction in E and n and the increase in ε. Even minor changes on the PCC moisture content involve remarkable modifications of the textural properties, which has to be considered for industry and retail distribution., The authors acknowledge the financial support from the “Ministerio de Ciencia, Innovación y Universidades” and “Agencia Estatal de Investigación” in Spain (RTC-2017-6314-2).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessment of avocado textural changes during ripening by using contactless air-coupled ultrasound

  • Fariñas, María Dolores
  • Sánchez-Torres, Eduardo A.
  • Sánchez-Jiménez, Virginia
  • Díaz, Ricardo
  • Benedito, José
  • García-Pérez, José V.
In the present study, the use of the air-coupled ultrasonic technique has been analysed as a new tool for the contactless assessment of the avocado post-harvest textural modifications during ripening. Thus, ultrasonic parameters, such as maximum wave amplitude and ultrasound velocity, and textural ones, such as hardness, elastic modulus and relaxation capacity, were measured on avocado slices. During ripening, avocado reduced its elastic modulus (from 2.29 ± 0.75 to 0.16 ± 0.08 MPa), became softer and became more viscoelastic, which was well described from zero and first-order kinetic models. These changes increased ultrasound attenuation, decreasing the maximum amplitude of the ultrasonic signal (from 336.6 to 55.4 V/m), while the ultrasonic velocity remained constant, between 320.1 ± 6.9 and 316.4 ± 82.6 m/s. Thereby, the maximum ultrasonic amplitude, which adequately correlated with textural parameters (ravg = 0.85), could be used to assess the post-harvest ripening on avocado slices., The authors acknowledge the financial support from the Ministerio de Economía y Competitividad (MINECO) and Agencia Estatal de Investigación in Spain (Project RTC-2017-6314-2) and the Generalitat Valenciana. M.D. Fariñas is grateful to the European Social Fund (ESF 2014–2020) and Generalitat Valenciana for her post-doctoral fellowship (APOSTD/2018/203)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Use of air-coupled ultrasound for the non-invasive characterization of the textural properties of pork burger patties

  • Fariñas, María Dolores
  • Contreras, Marina
  • Sánchez-Jiménez, Virginia
  • Benedito, José
  • García-Pérez, José V.
This study tests the feasibility of air-coupled ultrasound for the characterization of the textural properties of pork burger patties. The samples were prepared by mixing lard at different percentages (0, 20, 40, 60 and 80%) with a commercial burger meat mixture. Through-transmission airborne ultrasound measurements (250 kHz) were carried out at 5 and 20 °C. Ultrasonic velocity at 5 °C increased exponentially with fat content (r = 0.99), varying from 1587 to 1668 m/s, whereas it remained fairly constant at 20 °C (1644 to 1624 m/s). Ultrasonic attenuation decreased with fat content following an exponential pattern (r = −0.83 at 5 °C; r = −0.93 at 20 °C) and ranged from 62.6 to 44.8 Np/m at 5 °C, and from 76.7 to 42.2 Np/m at 20 °C. Noticeable correlations were found between hardness and ultrasonic velocity (r = 0.89 at 5 °C), and between Total Relaxation Capacity and ultrasonic attenuation (r = 0.89 at 5 °C; r = 0.99 at 20 °C). Additionally, airborne ultrasound allowed an accurate (mean relative difference 2.3%) prediction of burger thickness., This work was supported by the Agencia Estatal de Investigación in Spain (Project RTC-2017-6314-2 & RTA 2017-00024-C04-03). M.D. Fariñas is grateful for her post-doctoral “Juan de la Cierva” fellowship (FJCI-2017-34,759) through the program funded by the Spanish Ministry of Science, Innovation and Universities., Peer reviewed