Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

UAV payload with collision mitigation for contact inspection

  • González De Santos, Luis Miguel
  • Martínez Sánchez, Joaquín
  • González Jorge, Higinio
  • Navarro Medina, Fermín
  • Arias Sánchez, Pedro
This document presents a payload designed to perform semi-autonomous collision-mitigation inspection tasks on UAVs. This system features no external aid positioning the UAV such as the motion capture systems or the Global Navigation Satellite System (GNSS), which makes these inspections possible in the GNSS-denied areas. The payload is composed of two distance measuring units that calculate the range and angle between the UAV and the structure. The payload controller uses this information to calculate the pitch and yaw signal to control approach and contact. A hybrid automaton has been implemented, which represents the corresponding UAV states during the approach and the contact with different control strategies for each one. For this study, an ultrasonic contact sensor was used as an inspection sensor, but the system can work with any other contact sensor. This sensor measures the thickness of the metal sheets when is in contact with it. Various tests have been performed on the system with accurate results, demonstrating that the system can maintain stable contact with a vertical structure., Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158-C4-2-R, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Scan planning optimization for outdoor archaeological sites

  • Díaz Vilariño, Lucía
  • Frías Nores, Ernesto
  • Previtali, Mattia
  • Scaioni, Marco
  • Balado Frías, Jesús
The protection and management of archaeological sites require from a deep documentation and analysis, and although hand measuring and documentation is the cheapest way for collecting data, laser scanner has been gradually integrated for the geometrical data capture since point clouds have a high quality in terms of accuracy, precision and resolution. Although acquisition with laser scanner is considered a quick process, scan planning is of high relevance when considering outdoor archaeological sites because of their large size and complexity. In this paper, an automatic methodology to optimize the number and position of scans in order to obtain a point cloud of high quality in terms of data completeness is proposed. The aim of the methodology is to minimize the number of scans, minimizing at the same time the estimated surveying time and the amount of repetitive acquired data. Scan candidates are generated by using a grid-based and a triangulation-based distribution, and results show a faster analysis when triangulation is implemented. The methodology is tested into two real case studies from Italy and Spain, showing the applicability of scan planning in archaeological sites, Xunta de Galicia | Ref. ED481B 2016/079-0, Xunta de Galicia | Ref. ED431C 2016-038, Universidade de Vigo | Ref. 00VI 131H 641.02, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158-C4-2-R, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7, European Cooperation in Science and Technology (COST) | Ref. CA15201
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Automatic building accessibility diagnosis from point clouds

  • Balado Frías, Jesús
  • Díaz Vilariño, Lucía
  • Arias Sánchez, Pedro
  • Soilán Rodríguez, Mario
Building accessibility diagnosis is of high interest especially in case of people with reduced mobility. This paper proposes a methodology for automated detection of inaccessible steps in building façade entrances from MLS (mobile laser scanner) data. Our approach uses the MLS trajectory to automatically subdivide urban point clouds into regular stretches. From each stretch, the lower zone of façade is isolated and selected as region of interest. Points belonging to vertical elements are projected onto a 2D image and steps are detected and classified as inaccessible areas according to the comparison of geometrical features such as height jump, proximity to ground and width, with regulation. The methodology has been tested in four real datasets, which constitute > 400 m of different urban scenarios. Results exhibit a robust performance under urban scenes with a high variability of façade geometry due to the presence of different entrance types to shops and dwellings. Results have been quantitatively evaluated and they show global F1 value around 93%. Moreover, the methodology is very fast since 100 m are processed in < 2 min., Xunta de Galicia | Ref. ED481B 2016/079-0, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158- C4-2-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

New discretization method applied to NBV problem: semioctree

  • González De Santos, Luis Miguel
  • Martínez Sánchez, Joaquín
  • González Jorge, Higinio
  • Díaz Vilariño, Lucía
  • Riveiro Rodríguez, Belén
This paper presents a discretization methodology applied to the NBV (Next Best View) problem, which consists of determining the heuristical best position of the next scan. This new methodology is a hybrid process between a homogenous voxelization and an octree structure that preserves the advantages of both methods. An octree structure is not directly applicable to the NBV problem: As the point cloud grows with every successive scanning, the limits and position of the discretization, octree structure must coincide, in order to transfer the information from one scan to the next. This problem is solved by applying a first coarse voxelization, followed by the division of each voxel in an octree structure. In addition, a previous methodology for solving the NBV problem has been adapted to make use of this novel approach. Results show that the new method is three times faster than the homogenous voxelization for a maximum resolution of 0.2m. For this target resolution of 0.2m, the number of voxels/octants in the discretization is reduced approximately by a 400%, from 35.360 to 8.937 for the study case presented., Xunta de Galicia | Ref. ED481B 2016/079-0, Ministerio de Economia, Industria y Competitividad | Ref. TIN2016- 77158-C4-2-R, Ministerio de Interior | Ref. SPIP2017-02122, Xunta de Galicia | Ref. ED431C 2016-038, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Autonomous point cloud acquisition of unknown indoor scenes

  • González De Santos, Luis Miguel
  • Díaz Vilariño, Lucía
  • Balado Frías, Jesús
  • Martínez Sánchez, Joaquín
  • González Jorge, Higinio
  • Sánchez Rodríguez, Ana
This paper presents a methodology for the automatic selection of heuristic scanning positions in unknown indoor environments. The surveying is carried out by a robotic system following a stop-and-go procedure. Starting with a random scan position in the room, the point cloud is discretized in voxels and they are submitted to a two-step classification and are labelled as occupied, occluded, empty, window, door, or exterior based on a visibility analysis. The main objective of the methodology is to obtain a complete point cloud of the indoor space and accordingly, the next best position is the scan position minimizing occluded voxels. Because the method locates doors and windows, the room can be delimited and the scan can continue for adjacent rooms. This approach has been tested in a real case study, in which three scans were developed., Xunta de Galicia | Ref. ED481B 2016/079-0, Ministerio de Economia, Industria y Competitividad | Ref. RTC-2016-5257-7, Ministerio de Economia, Industria y Competitividad | Ref. TIN2016-77158-C4-2-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Point clouds to direct indoor pedestrian pathfinding

  • Balado Frías, Jesús
  • Díaz Vilariño, Lucía
  • Arias Sánchez, Pedro
  • Frías Nores, Ernesto
Increase in building complexity can cause difficulties orienting people, especially people with reduced mobility. This work presents a methodology to enable the direct use of indoor point clouds as navigable models for pathfinding. Input point cloud is classified in horizontal and vertical elements according to inclination of each point respect to n neighbour points. Points belonging to the main floor are detected by histogram application. Other floors at different heights and stairs are detected by analysing the proximity to the detected main floor. Then, point cloud regions classified as floor are rasterized to delimit navigable surface and occlusions are corrected by applying morphological operations assuming planarity and taking into account the existence of obstacles. Finally, point cloud of navigable floor is downsampled and structured in a grid. Remaining points are nodes to create navigable indoor graph. The methodology has been tested in two real case studies provided by the ISPRS benchmark on indoor modelling. A pathfinding algorithm is applied to generate routes and to verify the usability of generated graphs. Generated models and routes are coherent with selected motor skills because routes avoid obstacles and can cross areas of non-acquired data. The proposed methodology allows to use point clouds directly as navigation graphs, without an intermediate phase of generating parametric model of surfaces, Universidade de Vigo | Ref. 00VI 131H 641.02, Xunta de Galicia | Ref. ED481B 2016/079-0, Xunta de Galicia | Ref. ED431C 2016-038, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158-C4-2-R, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Analysis of sun glare on roundabouts with aerial laser scanning data

  • Gonzalez Collazo, Silvia María
  • Balado Frías, Jesús
  • González, E.
  • Soilán Rodríguez, Mario
Road geometry and sun glares play an important role concerning road safety. In this research, the direct sunlight in a roundabout sited in Ávila (Spain) is analysed using Aerial Laser Scanning (ALS) point clouds. First, the roundabout is divided in 8 sections, obtaining the driver bearing vectors of the roundabout. Entrances and exits driver bearing vectors of the roundabout are also considered. Then, sun rays are generated for a specific location of the roundabout and in a specific day and time. The incidence of the sun rays with the driver’s vision angle is analysed based on human vision model. Finally, intersections of sun rays with obstacles are calculated utilizing ALS point clouds. ALS data is processed (removing outliers, reducing point density, and computing a Delaunay Triangulation) in order to obtain accurate intersection results with obstacles and optimise the computational time. The method was tested in a roundabout, considering different driver bearings, the slope of the road and the elevation of the terrain. The results show that sun glares are detected at any day and time of the year, therefore areas with risk of direct sun glare within the roundabout are identified. The sun ray’s incidence in the vision angle of the driver is higher during winter solstice, and intersections with obstacles occur mainly during sunrise and sunset. In roundabout vector 7, during winter solstice there is direct sun glare for 7 hours 30 minutes, at the equinoxes for 6 hours 15 minutes and during summer solstice there is no direct sun glare., Xunta de Galicia | Ref. ED481B-2019-061, Xunta de Galicia | Ref. ED431C 2020/01, Ministerio de Ciencia e Innovación | Ref. PID2019-105221RB-C43, Ministerio de Ciencia e Innovación | Ref. TIN2016-77158 -C4-2-R, Ministerio de Ciencia e Innovación | Ref. FJC2018-035550-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Accessible routes integrating data from multiple sources

  • Luaces, Miguel R.
  • Fisteus, Jesús A.
  • Sánchez Fernández, Luis
  • Munoz Organero, Mario
  • Balado Frías, Jesús
  • Díaz Vilariño, Lucía
  • Lorenzo Cimadevila, Henrique Remixio
Providing citizens with the ability to move around in an accessible way is a requirement for all cities today. However, modeling city infrastructures so that accessible routes can be computed is a challenge because it involves collecting information from multiple, large-scale and heterogeneous data sources. In this paper, we propose and validate the architecture of an information system that creates an accessibility data model for cities by ingesting data from different types of sources and provides an application that can be used by people with different abilities to compute accessible routes. The article describes the processes that allow building a network of pedestrian infrastructures from the OpenStreetMap information (i.e., sidewalks and pedestrian crossings), improving the network with information extracted obtained from mobile-sensed LiDAR data (i.e., ramps, steps, and pedestrian crossings), detecting obstacles using volunteered information collected from the hardware sensors of the mobile devices of the citizens (i.e., ramps and steps), and detecting accessibility problems with software sensors in social networks (i.e., Twitter). The information system is validated through its application in a case study in the city of Vigo (Spain)., Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158-C4-1-R, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158- C4-2-R, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158-C4-3-R, Agencia Estatal de Investigación | Ref. PID2019-105221RB-C41, Agencia Estatal de Investigación | Ref. PID2019-105221RB-C43, Agencia Estatal de Investigación | Ref. PID2019-105221RB-C44, Xunta de Galicia | Ref. ED431C 2017/58, Xunta de Galicia | Ref. IN852A 2018/14, Xunta de Galicia | Ref. ED431G 2019/01, Xunta de Galicia | Ref. ED481B-2019-061, Xunta de Galicia | Ref. ED481D 2019/020
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Scan planning and route optimization for control of execution of as-designed BIM

  • Díaz Vilariño, Lucía
  • Frías Nores, Ernesto
  • Balado Frías, Jesús
  • González Jorge, Higinio
Abstract. Scan-to-BIM systems have been recently proposed for the dimensional and quality assessment of as-built construction components with planned works. The procedure is generally based on the geometric alignment and comparison of as-built laser scans with as-designed BIM models. A major concern in Scan-to-BIM procedures is point cloud quality in terms of data completeness and consequently, the scanning process should be designed in order to obtain a full coverage of the scene while avoiding major occlusions. This work proposes a method to optimize the number and scan positions for Scan-to-BIM procedures following stop & go scanning. The method is based on a visibility analysis using a ray-tracing algorithm. In addition, the optimal route between scan positions is formulated as a travelling salesman problem and solved using a suboptimal ant colony optimization algorithm. The distribution of candidate positions follows a grid-based structure, although other distributions based on triangulation or tessellation can be implemented to reduce the number of candidate positions and processing time., Xunta de Galicia | Ref. ED481B 2016/079-0, Xunta de Galicia | Ref. ED431C 2016- 038, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158- C4-2-R, Ministerio de Economia, Industria y Competitividad | Ref. RTC-2016-5257-7
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

From BIM to scan planning and optimization for construction control

  • Frías Nores, Ernesto
  • Díaz Vilariño, Lucía
  • Balado Frías, Jesús
  • Lorenzo Cimadevila, Henrique Remixio
Scan planning of buildings under construction is a key issue for an efficient assessment of work progress. This work presents an automatic method aimed to determinate the optimal scan positions and the optimal route based on the use of Building Information Models (BIM) and considering data completeness as stopping criteria. The method is considered for a Terrestrial Laser Scanner mounted on a mobile robot following a stop & go procedure. The method starts by extracting floor plans from the BIM model according to the planned construction status, and including geometry and semantics of the building elements considered for construction control. The navigable space is defined from a binary map considering a security distance to building elements. After a grid-based and a triangulation-based distribution are implemented for generating scan position candidates, a visibility analysis is carried out to determine the optimal number and position of scans. The optimal route to visit all scan positions is addressed by using a probabilistic ant colony optimization algorithm. The method has been tested in simulated and real buildings under very dissimilar conditions and structural construction elements. The two approaches for generating scan position candidates are evaluated and results show the triangulation-based distribution as the more efficient approach in terms of processing and acquisition time, especially for large-scale buildings., Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7, Xunta de Galicia | Ref. ED481B 216/079-0
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Detection of direct sun glare on drivers from point clouds

  • Gonzalez Collazo, Silvia María
  • Del Rio Barral, Pablo
  • Balado Frías, Jesús
  • González Rodríguez, Maria Elena
Sunlight conditions can reduce drivers’ visibility, which is a safety concern on road networks. This research introduces a method to study sun glare incidence in road environments. Sun glare areas during daylight hours are automatically detected from mobile laser scanning (MLS) and aerial laser scanning (ALS) point clouds. The method comprises the following steps. First, the Sun’s position (solar altitude and azimuth) referring to a location is calculated. Second, the incidence of sun glare with the user’s angle of vision is analyzed based on human vision. Third, sun ray intersections with near obstacles (vegetation, building, etc.) are calculated utilizing MLS point clouds. Finally, intersections with distant obstacles (mountains) are calculated utilizing ALS point clouds. MLS and ALS data are processed in order to combine both data types, remove outliers, and optimize computational time for intersection searches (point density reduction and Delaunay triangulation). The method was tested on two real case studies, covering roads with different bearings, slopes, and surroundings. The combination of MLS and ALS data, together with the solar geometry, identify areas of risk for the visibility of drivers. Consequently, the proposed method can be utilized to reduce sun glare, implementing warnings in navigation systems., Xunta de Galicia | Ref. ED481B-2019-061, Xunta de Galicia | Ref. ED431C 2020/01, Agencia Estatal de Investigación | Ref. PID2019-105221RB-C43, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158- C4-2-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Automatic measurement of water height in the As Conchas (Spain) reservoir using sentinel 2 and aerial LiDAR data

  • González Jorge, Higinio
  • González De Santos, Luis Miguel
  • Martínez Sánchez, Joaquín
  • Sánchez Rodríguez, Ana
  • Lorenzo Cimadevila, Henrique Remixio
A methodology for the measurement of height in water reservoirs is developed. It is based on Sentinel 2 imagery and aerial LiDAR data. The methodology is automatized using Matlab software and focused on image processing techniques (equalization, binarization, and edge detection) combined with LiDAR data processing (near neighbour search and height averaging). It is applied in a region of interest selected by the user characterized by a water–land interface. Results are validated in the As Conchas water reservoir (Spain) using an in situ sensing system provided by the Hydrographic Miño-Sil Confederation. The duration of the experiment was one year. The Sentinel 2 bands B2, B3, B4, and B8 were tested during this study. The best results for water height evaluation were obtained for band B8 (842 nm) with an error of 0.20 m and a standard deviation of 0.17 m. The time resolution of the technique depends on the Sentinel 2 revisit time. The time resolution and height accuracy could be improved using complementary satellite systems, Xunta de Galicia | Ref. ED431C2016‐038, Ministerio de Interior | Ref. SPIP2017-02122, Ministerio de Economía, Industria y Competitividad | Ref. EUIN2017-87598, Ministerio de Economía, Industria y Competitividad | Ref. TIN2016-77158-C4-2-R, Ministerio de Economía, Industria y Competitividad | Ref. RTC-2016-5257-7
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Accessible Routes Integrating Data from Multiple Sources

  • Rodríguez Luaces, Miguel
  • Arias Fisteus, Jesús
  • Sánchez-Fernández, Luis
  • Muñoz-Organero, Mario
  • Balado, Jesús
  • Díaz-Vilariño, Lucía
  • Lorenzo, Henrique
[Abstract] Providing citizens with the ability to move around in an accessible way is a requirement for all cities today. However, modeling city infrastructures so that accessible routes can be computed is a challenge because it involves collecting information from multiple, large-scale and heterogeneous data sources. In this paper, we propose and validate the architecture of an information system that creates an accessibility data model for cities by ingesting data from different types of sources and provides an application that can be used by people with different abilities to compute accessible routes. The article describes the processes that allow building a network of pedestrian infrastructures from the OpenStreetMap information (i.e., sidewalks and pedestrian crossings), improving the network with information extracted obtained from mobile-sensed LiDAR data (i.e., ramps, steps, and pedestrian crossings), detecting obstacles using volunteered information collected from the hardware sensors of the mobile devices of the citizens (i.e., ramps and steps), and detecting accessibility problems with software sensors in social networks (i.e., Twitter). The information system is validated through its application in a case study in the city of Vigo (Spain)., This work was supported in part by the project Friendly barrierLess AdapTable City (FLATCity) (Ministerio de Ciencia, innovación y Universidades/ERDF, EU) funded by the Spanish Agencia Estatal de Investigación (AEI, doi 10.13039/501100011033), and in part by the European Regional Development Fund (ERDF), under Grants TIN2016-77158-C4-1-R, TIN2016-77158-C4-2-R and TIN2016-77158-C4-3-R. This work was also supported in part by the project Massive Geospatial Data Storage and Processing for Intelligent and Sustainable Urban Transportation (MaGIST), funded by the Spanish Agencia Estatal de Investigación (AEI, doi 10.13039/501100011033) under grants PID2019-105221RB-C41, PID2019-105221RB-C43 and PID2019-105221RB-C44. The research of Miguel R. Luaces was also partially founded by: Xunta de Galicia/FEDER-UE GRC: ED431C 2017/58 and Xunta de Galicia/FEDER-UE, ConectaPeme, GEMA: IN852A 2018/14. Miguel R. Luaces also wishes to acknowledge the support received from the Centro de Investigación de Galicia “CITIC”, funded by Xunta de Galicia and the European Union (European Regional Development Fund- Galicia 2014-2020 Program), by grant ED431G 2019/01. Jesús Balado and Lucía Díaz-Vilariño would like to thank to the Xunta de Galicia given through human resources grants ED481B-2019-061 and ED481D 2019/020, respectively, Xunta de Galicia; ED431C 2017/58, Xunta de Galicia; IN852A 2018/14, Xunta de Galicia; ED481B-2019-061, Xunta de Galicia; ED481D2019/020, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Extending general compact querieable representations to GIS applications

  • Brisaboa, Nieves R.
  • Cerdeira-Pena, Ana
  • Bernardo, Guillermo de
  • Navarro, Gonzalo
  • Pedreira, Óscar
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/. This version of the article “Brisaboa, N.R., Cerdeira-Pena, A., de Bernardo, G., Navarro, G., Pedreira, Ó., 2020. Extending general compact querieable representations to GIS applications. Information Sciences 506, 196–216” has been accepted for publication in Information Sciences. The Version of Record is available online at https://doi.org/10.1016/j.ins.2019.08.007, [Abstract]: The raster model is commonly used for the representation of images in many domains, and is especially useful in Geographic Information Systems (GIS) to store information about continuous variables of the space (elevation, temperature, etc.). Current representations of raster data are usually designed for external memory or, when stored in main memory, lack efficient query capabilities. In this paper we propose compact representations to efficiently store and query raster datasets in main memory. We present different representations for binary raster data, general raster data and time-evolving raster data. We experimentally compare our proposals with traditional storage mechanisms such as linear quadtrees or compressed GeoTIFF files. Results show that our structures are up to 10 times smaller than classical linear quadtrees, and even comparable in space to non-querieable representations of raster data, while efficiently answering a number of typical queries., Partially funded by: IMFD; Xunta de Galicia/FEDER-UE grants CSI:ED431G/01 and GRC:ED431C 2017/58; Xunta de Galicia/FEDER-UE, ConectaPeme grant GEMA: IN852A 2018/14; Xunta de Galicia/GAIN grant Innovapeme: IN848D-2017-2350417; by MINECO-AEI/FEDER-UE grants Flatcity: TIN2016-77158-C4-3-R, Datos 4.0: TIN2016-78011-C4-1-R and ETOME-RDFD3: TIN2015-69951-R; MICINN-AEI/FEDER-UE grants Steps: RTC-2017-5908-7 and BIZDEVOPS: RTI2018- 098309-B-C32; and EU H2020 MSCA RISE BIRDS: 690941. An early partial version of this article appeared in Proc SPIRE’13. Some parts of this work also appeared in G. de Bernardo’s PhD thesis., Xunta de Galicia; ED431G/01, Xunta de Galicia; ED431C 2017/58, Xunta de Galicia; IN852A-2018/14, Xunta de Galicia; IN848D-2017-2350417