Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Shrinkage prediction of recycled aggregate structural concrete with alternative binders through partial correction coefficients

  • Revilla Cuesta, Víctor
  • Evangelista, Luís
  • Brito, Jorge de
  • Skaf Revenga, Marta
  • Manso Villalaín, Juan Manuel
Estimating the shrinkage of structural concrete is essential to calculate, at the design stage, the stresses that a structure may experience due to this phenomenon. Nevertheless, changes in composition, as well as the use of wastes as raw materials, alter the shrinkage behaviour of concrete and render invalid shrinkage-prediction models from the standards. This paper shows a procedure to estimate the shrinkage of recycled aggregate concrete made with alternative binders. This procedure is based on modifying the shrinkage estimated through the Eurocode 2 or ACI 209.2R models by multiplying it by a partial correction coefficient for every change in concrete composition. The application of this procedure to high-performance and self-compacting concretes made with various contents of recycled aggregate of different maturity, reactive magnesium oxide and ground granulated blast furnace slag showed that it is suitable for estimating long-term shrinkage with maximum deviations of ±10%. However, to obtain an adequate accuracy, it is necessary to bear in mind some tips, such as the need to consider the prediction interactions between the factors, the usefulness of the natural logarithm of the concrete age to improve the estimation accuracy or the convenience of introducing a concrete-age-dependent coefficient to reach accurate shrinkage estimations at early ages. Finally, the partial correction coefficients are found to be of a simpler nature for the ACI 209.2R model, so this model is recommended for predicting the shrinkage of recycled aggregate concrete., This work was supported by the Spanish Ministry of Universities, MICINN, AEI, EU and ERDF [grant numbers PID2020-113837RB-I00; 10.13039/501100011033; FPU17/03374; EST19/00263]. Moreover, the authors acknowledge the support of the Junta de Castilla y León [grant number UIC231]; the University of Burgos [grant number Y135. GI]; and the Foundation for Science and Technology, CERIS Research Centre and Instituto Superior Técnico.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Quantification and characterization of the microstructural damage of recycled aggregate self-compacting concrete under cyclic temperature changes

  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
  • Chica Páez, José Antonio
  • Ortega López, Vanesa
  • Manso Villalaín, Juan Manuel
Recycled Aggregate (RA) usually increases porosity and weakens Interfacial Transition Zones (ITZs) of concrete, which favors the appearance of internal thermal damage. Four Self-Compacting Concrete (SCC) mixes with coarse and fine RA were subjected to positive and negative cyclic temperature variations to characterize their thermal damage and quantify its effects. Two damage mechanisms were found. On the one hand, micro-cracks appeared in the ITZs. On the other hand, micro-cracks arose from the micro-pores and propagated through the cementitious matrix. Both damage mechanisms were promoted by the use of coarse and fine RA, respectively. The damage was most notable at sub-zero temperatures and when adding coarse RA. Furthermore, it primarily affected compressive strength, although ultrasonic pulse velocity and hardened density also decreased, which served as non-destructive indicators to indirectly quantify the level of thermal internal damage of SCC., This work was funded by MICINN, AEI, EU, ERDF and NextGenerationEU/PRTR [PID2020-113837RB-I00; 10.13039/501100011033; TED2021-129715B-I00; FPU17/03374]; JCyL and ERDF [UIC-231]; and the University of Burgos [SUCONS, Y135.GI].
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Hammer rebound index as an overall-mechanical-quality indicator of self-compacting concrete containing recycled concrete aggregate

  • Revilla Cuesta, Víctor
  • Ortega López, Vanesa
  • Faleschini, Flora
  • Espinosa González, Ana Belén
  • Serrano López, Roberto
The hammer rebound index has traditionally been solely and exclusively used to estimate the compressive strength of vibrated concrete. Its use has recently been extended to the prediction of the compressive strength of Self-Compacting Concrete (SCC) and concrete produced with Recycled Concrete Aggregate (RCA). The conventional use of the hammer-rebound test is further developed in this paper, by demonstrating how it can be used to estimate the overall mechanical behavior of SCC containing RCA. To do so, nine SCC mixes with different contents and fractions (coarse, fine, and powder) of RCA are analyzed. Following a simple-linear-regression validation and property standardization procedure, the hammer rebound index is then expressed as a linear combination of four mechanical properties, adjusted through a multiple regression. The hammer rebound index is therefore expressed as a weighting of both the mean value of compressive behavior (arithmetic mean of compressive strength and modulus of elasticity) amounting to a weight of 72.8%, and the mean value of bendingtensile behavior (arithmetic mean of splitting tensile strength and flexural strength) amounting to a weight of 27.2%. The hammer rebound index can therefore be construed as an overall-mechanical-quality performance indicator of the SCC containing RCA, which can also yield predictions of every mechanical property. In this way, the application of the hammer rebound index could likewise be of use in rehabilitation, pathology, and healthmonitoring works where a full characterization of the mechanical performance of SCC with RCA is required, facilitating the use of SCC with RCA in real structures., The authors wish to express their gratitude to the following government ministries, agencies, and universities for funding this research: the Spanish Ministry of Universities, MICIN, AEI, EU, ERDF and NextGenerationEU/ PRTR [PID2020-113837RB-I00; 10.13039/501100011033; TED2021- 129715B-I00; FPU17/03374; PRX21/00007]; the Junta de Castilla y León (Regional Government) and ERDF [UIC-231, BU119P17]; the University of Burgos [SUCONS, Y135.GI]; and, finally, the University of Padova.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Multi-parametric flowability classification of self-compacting concrete containing sustainable raw materials: An approach to real applications

  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
  • Ortega López, Vanesa
  • Manso Villalaín, Juan Manuel
Adding sustainable raw materials to Self-Compacting Concrete (SCC) modifies its flowability behavior. Furthermore, the use of these raw materials may at the same time even improve one fresh property while worsening another. An accurate flowability description of SCC containing sustainable raw materials therefore requires a multi-parametric classification that simultaneously covers all fresh properties (slump flow, viscosity, and blocking ratio) for an accurate description of its potential applications. Existing classifications consider each fresh property independently. In this paper, a multi-parametric flowability classification of SCC containing sustainable raw materials is proposed. The effects of multiple sustainable raw materials on SCC flowability are compiled in a dataset serving as a knowledge base with information on 663 SCC mixes containing sustainable aggregates and binders. The statistical analysis of the dataset led to the definition of three types of flowability zones. Firstly, the overall-flowability zones, in which SCC flowability is described in absolute terms: the better the in-fresh properties, the better the overall-flowability zone. Secondly, the flowability-balance zones reflect the balance between free flow (slump flow and slump-flow viscosity) and flow around obstacles (V-funnel emptying time and L-box blocking ratio). Finally, SCC is classified within flowability-predominance zones, which define the main characteristic of SCC flowability, rate of flow (viscosity) or uniformity of flow (spreading). The variability of the effect of each sustainable raw material on the flowability of SCC makes this classification useful, in so far as it offers a complete picture of the fresh behavior of SCC in which all fresh properties are simultaneously considered. Furthermore, based on the description in the proposed classification of overall flowability and the balance between free flow and flow around obstacles, the application fields are defined for which the use of each SCC mix with sustainable raw materials is recommended., This research work was supported by the Spanish Ministry of Universities, MICINN, AEI, EU, ERDF and NextGenerationEU/PRTR [grant numbers PID2020-113837RB-I00; 10.13039/501100011033; TED2021-129715B–I00; FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [grant number UIC-231]; and, finally, the University of Burgos [grant number SUCONS, Y135. GI].
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Utility of Ultrasonic Pulse Velocity for Estimating the Overall Mechanical Behavior of Recycled Aggregate Self-Compacting Concrete

  • Espinosa González, Ana Belén
  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
  • Faleschini, Flora
  • Ortega López, Vanesa
Ultrasonic pulse velocity (UPV) is a non-destructive measurement technique with which the quality of any concrete element can be evaluated. It provides information on concrete health and for assessing the need for repair in a straightforward manner. In this paper, the relationship is studied between UPV readings and the mechanical behavior of self-compacting concrete (SCC) containing coarse, fine, and/or powdery RA. To do so, correlations and simple- and multipleregression relationships between compressive strength, modulus of elasticity, splitting tensile strength, flexural strength, and UPV readings of nine SCC mixes were assessed. The correlations showed that the relationship of UPV with any mechanical property was fundamentally monotonic. The inverse square-root model was therefore the best-fitting simple-regression model for all the mechanical properties, although for bending-tensile-behavior-related properties (splitting tensile strength and flexural strength) the estimation accuracy was much lower than for compressive-behavior-related properties (compressive strength and modulus of elasticity). Linear-combination multiple-regression models showed that the properties related to bending-tensile behavior had a minimal influence on the UPV value, and that their introduction resulted in a decreased estimation accuracy. Thus, the multiple-regression models with the best fits were those that linked the compressive-behavior-related properties to the UPV readings. This therefore enables the estimation of the modulus of elasticity when the UPV and compressive strength are known with a deviation of less than ±20% in 87% of the SCC mixes reported in other studies available in the literature., This research was funded by the Spanish Ministry of Universities, MICIN, AEI, EU, ERDF, and NextGenerationEU/PRTR, grant numbers PID2020-113837RB-I00, 10.13039/501100011033, and TED2021-129715B-I00; the Junta de Castilla y León (Regional Government) and ERDF, grant number UIC-231; and the University of Burgos, grant numbers SUCONS, Y135.GI.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Effects of temperature and moisture fluctuations for suitable use of raw-crushed wind-turbine blade in concrete

  • Revilla Cuesta, Víctor
  • Hurtado Alonso, Nerea
  • Manso Morato, Javier
  • Serrano López, Roberto
  • Manso Villalaín, Juan Manuel
Raw-crushed wind-turbine blade (RCWTB), a waste from the recycling of wind-turbine blades, is used as a raw material in concrete in this research. It contains not only fiberglass-composite fibers that bridge the cementitious matrix but also polyurethane and balsa-wood particles. Therefore, concrete containing RCWTB can be notably affected by moisture and temperature fluctuations and by exposure to high temperatures. In this research, the performance of five concrete mixes with 0.0%, 1.5%, 3.0%, 4.5%, and 6.0% RCWTB, respectively, is studied under moist/dry, alternating-sign-temperature-shock, and high-temperature-shock tests. Two damage mechanisms of RCWTB within concrete were found through these tests: on the one hand, micro-cracking of the cementitious matrix, which was verified by microscopic analyses and was dependent on concrete porosity; on the other, damage and degradation of the RCWTB components, as the polyurethane melted, and the balsa-wood particles burned. Both phenomena led to larger remaining-strain levels and reduced concrete compressive strength by up to 25% under temperature and humidity variations, although the bridging effect of the fiberglass-composite fibers was effective when adding RCWTB amounts higher than 3.0%. The compressive-strength loss after the high-temperature-shock test increased with the RCWTB content, reaching maximum values of 8% after an exposure time of 7 days. Statistical analyses revealed that effect of the RCA amount in the concrete was conditioned by the exposure times in all the tests. The accurate definition of those times is therefore key to set an RCWTB content in concrete that ensures its suitable behavior under the environmental conditions analyzed., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research work was funded by the Spanish Ministry of Universities, MICINN, AEI, EU, ERDF, and NextGenerationEU/PRTR [grant numbers PID2020-113837RB-I00, PID2023-146642OB-I00,https://doi.org/10.13039/501100011033, TED2021-129715B-I00, and FPU21/04364]; the Junta de Castilla y León (Regional Government) and ERDF [grant numbers UIC-231, BU033P, and3; BU066-22]; and, finally, the University of Burgos [grant number SUCONS, Y135.GI].