Skip to main content

Research Output

Rights
Projectcode
Total results (including duplicates): 81720
Found on 8172 page(s)
DIGITAL.CSIC. Repositorio Institucional del CSIC
oai:digital.csic.es:10261/400996
Research data Set de datos (Dataset)

Indicadores para la implementación de la ciencia abierta en las universidades españolas (Proyecto DOSSUET)

  • De Filippo, Daniela
  • Sanz Casado, Elías
  • García-Zorita, Carlos
  • Serrano-López, Antonio
  • Pandiella-Dominique, Andrés
  • Sastrón-Toledo, Pablo
  • Alonso Álvarez, Patricia
  • Yanes Pérez, Mario
Este dataset contiene los indicadores propuestos para analizar diferentes dimensiones relacionadas con la ciencia abierta en las universidades españolas. A través de diferentes fuentes de información (Web of Science, SCOPUS, Agencia Estatal de Investigación, CORDIS, Observatorio de Ciencia Ciudadana, RECOLECTA, Sherpa Juliet, LENS, CRUE/OTRI, Altmetric.com, Overton) se han obtenido datos a nivel institucional de todo el Sistema Universitario Español en la década 2012-2021. Este conjunto de datos complementa la información presentada en el documento homónimo: "Informe sobre la aplicación de indicadores para el análisis de la implementación de la ciencia abierta en las universidades españolas" que se corresponde con el Entregable 7 del proyecto "Diagnóstico de la open science en la universidad española e instrumentos para su implementación y mejora"., Ministry of Science and Technology, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
oai:digital.csic.es:10261/401000
Research data Set de datos (Dataset)

Raw data of shipboard ADCP current measurements (75 kHz) during RV Sarmiento de Gamboa cruise iMirabilis2, Leg1 in Cabo Verde

  • Mosquera-Giménez, Ángela
  • Vélez-Belchí, Pedro
  • Mouzo Bellino, Iván
  • Rodríguez Fornes, Pablo
  • Huvenne, Veerle A.I.
  • Orejas, Covadonga
[Events] iMirabilis2_Leg1_ADCP_Section_2 (West of Cadamosto Seamount) * Latitude Start: 14.560000 * Longitude Start: -25.157100 * Latitude End: 14.741900 * Longitude End: -25.145000 * Date/Time Start: 2021-08-07T09:03:00 * Date/Time End: 2021-08-07T10:15:00 * Location: Cabo Verde Archipelago, Cabo Verde * Campaign: iMirabilis2_Leg1 * Basis: Sarmiento de Gamboa * Method/Device: Vessel mounted Acoustic Doppler Current Profiler, RDI Ocean Surveyor, 75 kHz, retrieved with CODAS processing iMirabilis2_Leg1_ADCP_Section_3 (Northwest of Cadamosto Seamount) * Latitude Start: 14.733300 * Longitude Start: -25.161700 * Latitude End: 14.744200 * Longitude End: -25.145200 * Date/Time Start: 2021-08-09T10:47:00 * Date/Time End: 2021-08-09T12:06:00 * Location: Cabo Verde Archipelago, Cabo Verde * Campaign: iMirabilis2_Leg1 * Basis: Sarmiento de Gamboa * Method/Device: Vessel mounted Acoustic Doppler Current Profiler, RDI Ocean Surveyor, 75 kHz, retrieved with CODAS processing iMirabilis2_Leg1_ADCP_Section_4 (Cadamosto Seamount) * Latitude Start: 14.619500 * Longitude Start: -24.903800 * Latitude End: 14.658400 * Longitude End: -24.917300 * Date/Time Start: 2021-08-20T10:01:00 * Date/Time End: 2021-08-20T12:36:00 * Location: Cabo Verde Archipelago, Cabo Verde * Campaign: iMirabilis2_Leg1 * Basis: Sarmiento de Gamboa * Method/Device: Vessel mounted Acoustic Doppler Current Profiler, RDI Ocean Surveyor, 75 kHz, retrieved with CODAS processing iMirabilis2_Leg1_ADCP_Section_5 (Cadamosto Seamount) * Latitude Start: 14.659700 * Longitude Start: -24.914900 * Latitude End: 14.669000 * Longitude End: -24.894200 * Date/Time Start: 2021-08-20T12:41:00 * Date/Time End: 2021-08-20T14:51:00 * Location: Cabo Verde Archipelago, Cabo Verde * Campaign: iMirabilis2_Leg1 * Basis: Sarmiento de Gamboa * Method/Device: Vessel mounted Acoustic Doppler Current Profiler, RDI Ocean Surveyor, 75 kHz, retrieved with CODAS processing iMirabilis2_Leg1_ADCP_Section_6 (Cadamosto Seamount) * Latitude Start: 14.667300 * Longitude Start: -24.896700 * Latitude End: 14.645600 * Longitude End: -24.938200 * Date/Time Start: 2021-08-20T14:56:00 * Date/Time End: 2021-08-20T17:16:00 * Location: Cabo Verde Archipelago, Cabo Verde * Campaign: iMirabilis2_Leg1 * Basis: Sarmiento de Gamboa * Method/Device: Vessel mounted Acoustic Doppler Current Profiler, RDI Ocean Surveyor, 75 kHz, retrieved with CODAS processing iMirabilis2_Leg1_ADCP_Section_7 (Cadamosto Seamount) * Latitude Start: 14.645700 * Longitude Start: -24.938300 * Latitude End: 14.639400 * Longitude End: -24.831100 * Date/Time Start: 2021-08-20T17:21:00 * Date/Time End: 2021-08-20T18:01:00 * Location: Cabo Verde Archipelago, Cabo Verde * Campaign: iMirabilis2_Leg1 * Basis: Sarmiento de Gamboa * Method/Device: Vessel mounted Acoustic Doppler Current Profiler, RDI Ocean Surveyor, 75 kHz, retrieved with CODAS processing iMirabilis2_Leg1_ADCP_Section_8 (Cabo Verde to Canary Islands) * Latitude Start: 16.261900 * Longitude Start: -23.398500 * Latitude End: 27.579300 * Longitude End: -15.499600 * Date/Time Start: 2021-08-26T23:55:00 * Date/Time End: 2021-08-30T08:56:00 * Location: NW-Africa, Cabo Verde Abyssal Plain * Campaign: iMirabilis2_Leg1 * Basis: Sarmiento de Gamboa * Method/Device: Vessel mounted Acoustic Doppler Current Profiler, RDI Ocean Surveyor, 75 kHz, retrieved with CODAS processing, Raw current velocity data was acquired by a Dual RDI Ocean Surveyor 75 kHz (Broadband and Narrowband) Vessel Acoustic Doppler Current Profiler (VADCP) onboard RV Sarmiento de Gamboa during the research cruise iMirabilis2, Leg1. The system is installed at the port retractable keel of the vessel and has four beams, so that there are two estimations of the horizontal and vertical components of the velocity. The data were acquired with the VmDAS 1.46 software in both broadband, with a bin size of 4 m, a blanking distance of 8 m, and a total of 100 bins, and narrowband, with a bin size of 16 m, a blanking distance of 8 m, and a total of 100 bins., Horizon 2020 (H2020), grant/award no. 818123: Integrated Assessment of Atlantic Marine Ecosystems in Space and Time, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
oai:digital.csic.es:10261/401008
Research data Set de datos (Dataset)

Low-Cost Maskless Photolithography with LCD-3D Printing for 2D-Material Electronics

  • Wu, Qianqian
  • Zhang, Ying
  • Pucher, Thomas
  • McLarnon, Bob
  • Zamora, Esteban
  • Zhang, Peng
  • Xie, Yong
  • Castellanos-Gómez, Andrés
Raw data and images for “Low-Cost Maskless Photolithography with LCD-3D Printing for 2D-Material Electronics”, these data corresponding to the figures presented in the manuscript, inclede: optical microscopy images (such as: electrode before and after UV exposure and development, metal deposition and lift-off,Custom electrode); Differential reflectance spectra and optical image of bilayer MoS₂ ; Electrical measurements, including transfer curve and gate-dependent IVs,Photocurrent spectra; channel width measurement and summary abou wafer; optical microscopy images of different developed and exposure time; The data were collected, processed, and curated by the primary contributors listed as creators. This dataset is publicly available to support transparency, reproducibility, and further research based on the reported findings. For any questions regarding the dataset, please contact QianQian at qqw656592@gmail.com. Related publication: [To be updated upon publication], Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
oai:digital.csic.es:10261/401011
Research data Set de datos (Dataset)

Low D/H ratio for benzonitrile in TMC-1: Implication for the origin of PAHs in cold dark clouds

  • Cabezas, Carlos
  • Steber, Amanda L.
  • Janeiro, Jesús
  • Agúndez, Marcelino
  • Pereira-Santaella, Miguel
  • Cristóbal, Gabriel
  • Pérez, Dolores
  • Heras, Domingo
  • Lesarri, Alberto
  • García-Bernete, Ismael
  • Goicoechea, Javier R.
  • Cernicharo, José
This dataset contains the laboratory measured rotational transitions and the frequency predictions for each of the three isomers of monodeuterated benzonitrile together with the 1H and 13C NMR spectra of the chemical species synthesized in this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
oai:digital.csic.es:10261/401021
Research data Set de datos (Dataset)

Movebank Data used in Developing AETHER

  • Bustamante, Javier
[Data Description: AETHER Kestrel Movement Dataset] This document provides metadata for the processed dataset used in the AETHER manuscript, conforming to FAIR (Findable, Accessible, Interoperable, and Reusable) data principles., [Source] Original Data Repository: Movebank (available for download on Zenodo: https://zenodo.org/records/16990288) Study Name: Common Kestrel (Falco tinnunculus) breeding and non-breeding, Doñana, Spain Movebank Study ID: 2970193504 Principal Investigator: Sergio Hernández-León Citation: Hernández-León S (2024) Data from: Common Kestrel (Falco tinnunculus) breeding and non-breeding, Doñana, Spain. Movebank Data Repository. doi:10.5441/001/1.h125s56c, [Processed Dataset Columns] This describes the features in the final dataset used for analysis after processing and feature engineering. Core GPS Features timestamp: Description: The date and time of the GPS fix. Units: UTC Source: Original Movebank data. individual_id: Description: Unique identifier for each individual bird. Units: N/A Source: Original Movebank data. latitude: Description: The geographic latitude of the GPS fix. Units: Decimal Degrees Source: Original Movebank data. longitude: Description: The geographic longitude of the GPS fix. Units: Decimal Degrees Source: Original Movebank data. altitude_m: Description: The altitude of the bird above sea level. Units: Meters (m) Source: Original Movebank data. heading: Description: The direction of travel. Units: Degrees (0-360) Source: Original Movebank data. speed_ms: Description: The ground speed of the bird. Units: Meters per second (m/s) How it was derived: (You need to fill this in - e.g., "Calculated by the GPS device" or if you recalculated it, explain how)., [GPS Quality Features (for the GPS Expert)] satellite_count: Description: Number of satellites used to determine the GPS fix. Units: Integer Source: Original Movebank data. dop (Dilution of Precision): Description: A measure of the geometric quality of the satellite configuration. Lower values indicate higher precision. Units: N/A Source: Original Movebank data. time_to_fix_s: Description: The time it took for the GPS device to acquire a satellite fix. Units: Seconds (s) Source: Original Movebank data., [Engineered Kinematic Features (for the Kinematic Expert)] acceleration_ms2: Description: The change in speed over time. Units: Meters per second squared (m/s²) How it was derived: (You need to fill this in - e.g., "Calculated as the difference in 'speed_ms' between consecutive timestamps, divided by the time difference.") turning_angle: Description: The change in heading between consecutive points. Units: Degrees How it was derived: (You need to fill this in - e.g., "Calculated as the difference in 'heading' between consecutive timestamps."), Common kestrel (Falco tinnunculus) movements From Movebank (dataset source): "Movement data of Common kestrels (Falco tinnunculus) tagged in the winter 2021 at a communal roost in Doñana protected area (END). 10 individuals were tagged with UVA-BITS (7g) (University of Amsterdam, The Netherlands). From 2020 to 2023 we tagged Common kestrel breeders at nest-boxes in Doñana protected area (Sevilla) and at nest-boxes in Villalba del Alcor (Huelva). We deployed Axy-Trek loggers (4g) from TechnoSamrt (Italy), UVA-BITS (7g) (University of Amsterdam, The Netherlands), Pathtrack nanofix GEO+RF (4.7g) and MINI loggers (5g) from INTERREX (Poland). We deployed a in 2020: 6 AXY-TREK, 6 PATHTRACK, 5 UVA-BITS, in 2021: 14 UVA-BITS, in 2022: 13 UVA-BITS, in 2023: 2 UVA-BITS, 1 PATHTRACK, and 10 INTERREX MINI", Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
oai:digital.csic.es:10261/401038
Research data Set de datos (Dataset)

Data underpinning the EuropaBON roadmap for a unified, transnational biodiversity observation system in Europe

  • Kissling, W. Daniel
  • Lumbierres, Maria
  • Lyche Solheim, Anne
  • Liquete, Camino
  • Breeze, Tom
  • Bonn, Aletta
  • McCallum, Ian
  • Maes, Joachim
  • Hirsch, Tim
  • van Grunsven, Roy
  • Beja, Pedro
  • Smets, Bruno
  • Capinha, César
  • Ceia-Hasse, Ana
  • Fernández, Néstor
  • Santana, Joana
  • Moreira, Francisco
  • Junker, Jessica
  • Leese, Florian
  • Hammond, Eleanor
  • Brotons, Lluís
  • Morán-Ordóñez, Alejandra
  • Bormpoudakis, Dimitrios
  • Bruelheide, Helge
  • Buchhorn, Marcel
  • Calderón‐Sanou, Irene
  • Fernández, Miguel
  • Gamero, Anna
  • Gobin, Anne
  • Guerrero, Irene
  • Haase, Peter
  • Jandt, Ute
  • Klvaňová, Alena
  • Kühn, Ingolf
  • Marei Viti, Martina
  • Meissner, Kristian
  • Milanovic, Marija
  • Moe, Jannicke
  • Potts, Simon
  • Schmidt-Kloiber, Astrid
  • Valdez, Jose
  • Villero Pi, Dani
  • Pereira, Henrique M.
  • Petersen, Jan-Erik
  • Shinneman, Stacy
This repository provides the datasets underpinning the EuropaBON roadmap for a transnational biodiversity observation system in Europe. The data summarize 84 Essential Biodiversity Variables (EBVs), EBV-policy links, EU monitoring coverage of selected terrestrial, freshwater and marine examples, primary and supplementary monitoring techniques for EBVs and their relative importance, examples of monitoring sample sizes in Europe, and priorities for EBV workflow development. The files include: EBV metadata and characteristics: Overview and summary characteristics of 84 Essential Biodiversity Variables (EBVs), their entity types, spatiotemporal resolutions, and associated taxonomic and ecosystem groups. EBV-policy links: The direct or indirect, partial or complete links between a specific EBV and a specific EU policy. Monitoring coverage and effort: Sample size examples from EU-wide monitoring schemes, counts of freshwater monitoring sites under the Water Framework Directive, and shapefiles describing transect density, river and lake monitoring coverage, and number of marine monitoring programmes across Europe. Monitoring methods and priorities: Survey-based assessments of the relative importance of monitoring approaches (DNA-based, in-situ, citizen science, remote sensing, digital sensors), identification of primary and supplementary methods per EBV, and expert-elicited priorities for workflow development across terrestrial, freshwater, and marine domains. Together, these datasets provide a unique evidence base for: Designing an optimised spatial and methodological framework for biodiversity monitoring in Europe; Assessing current monitoring strengths, gaps, and redundancies across taxa, ecosystems, and regions; Supporting workflow development for EBV integration, modelling, and policy uptake; Informing the establishment of the proposed European Biodiversity Observation Coordination Centre (EBOCC). By making these datasets openly available, this repository provides transparacy for the design and implementation of a coordinated, policy-relevant, and technology-enabled biodiversity monitoring network in Europe. It serves as a direct companion to an associated scientific paper and as a reusable resource for researchers, policymakers, and practitioners working to strengthen biodiversity monitoring and conservation action in Europe and beyond., EuropaBON - Europa Biodiversity Observation Network: integrating data streams to support policy: 101003553, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
oai:digital.csic.es:10261/401045
Research data Set de datos (Dataset)

Hospitalised children with COVID-19 display a shift in faecal compounds related with the metabolism of vitamins and lipids

  • González-Iglesias, Héctor
  • Sanz, Miriam
  • Gutiérrez-Díaz, Isabel
  • Rodríguez, Jorge
  • Delgado, Susana
The SARS-CoV-2 virus and its rapid spread have made it a global health concern. We investigated the metabolic faecal profiles of paediatric patients hospitalised for COVID-19. The study included 16 patients (aged 4 to 14 years old) from six different Spanish hospitals and 20 age-matched healthy controls. The metabolic profile was analysed by liquid chromatography high resolution mass spectrometry, observing different metabolic profile between the two groups. Non-infected children had higher faecal levels of vitamins such as niacin, thiamine, and vitamin D3 derivatives. This datasets contains the raw data from untargeted metabolomics analysis in mzML. A 1290 Infinity II LC system (Agilent Technologies, California USA) coupled to an Agilent 6560B ion mobility quadrupole time-of-flight mass spectrometer (IM-QTOF MS/MS) equipped with an Agilent G1607A dual Jetstream orthogonal electrospray ionisation (ESI) source and the MassHunter WorkStation 11.0, was used operating in positive and negative ion modes in the 50-1000 m/z range. Chromatographic separations were performed on a Zorbax Eclipse plus C18 RR HD column (30x50 mm 1.8 µm, Agilent) at a temperature of 40 ºC and a flow rate of 0.3 ml/min. In positive ion mode, the optimised mobile phases consisted of MilliQ water containing 0.04% formic acid (phase A) and methanol containing 0.04% formic acid (phase B), while in negative ion mode they consisted of water containing 10 mM ammonium formate (Sigma, phase A) and 100% methanol (phase B). The optimised gradient with QCs was set as follows: 5% B for 0.5 min; 5 to 100% B over 0.5 to 8 min; 100% for 8 to 12 min; 100 to 5% B over 12 to 13 min, re-equilibrating the column for 3 min using the initial solvent composition., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
oai:digital.csic.es:10261/401046
Research data Set de datos (Dataset)

Inundation and salinity regimes support blue carbon conditions in Australian temperate supratidal forests

  • Kelleway, Jeffrey J.
  • Gorham, Connor
  • Trevathan-Tackett, Stacey M.
  • Palacios, María José
  • Serrano, Oscar
  • Lavery, Paul S.
  • Nagel-Tynan, Zachary
  • Conroy, Brooke
  • Bendall-Pease, Grace
  • Rigney, Stephen
  • Deutscher, Nicholas
  • Hughes, Michael
  • Carvalho, Rafael
  • Owers, Christopher
  • Jones, Alice
  • Russell, Sophie
  • Planque, Carole
  • Saintilan, Neil
  • Rogers, Kerrylee
[Description of the data and file structure] Files and variables File: dat_biomass.csv Description: Field biomass survey datasets of supratidal forest sites Variables Record: Data entry number (unique value) Plot_ID: Field plot ID Site: Study side ID (see dat_sites.csv for full details) Species: species of measured plant Dominant_genus: dominant canopy species of the plot Quadrat: quadrat ID within site Tree: Tree number within plot. n/a = not available (see Stem number instead) Stem: Stem number within plot. n/a = not available (see Tree number instead) Status: Tree health status (L = Live; D = Dead; S = Stressed) Height_m: Tree height. Unit = m. n/a = not recorded D10_cm: Trunk/stem diameter at 10cm above ground surface. Unit = cm. n/a = not recorded DBH_cm: Trunk/stem diameter at Breast Height (137cm above ground surface). Unit = cm. n/a = not recorded AGB_kg: Tree aboveground biomass estimate based on scaling with allometric equation. Unit = kg File: dat_cores.csv Description: Supratidal forest sediment sample dataset for the calculation of soil organic matter, soil organic carbon and related parameters n/a = not available Variables Record: Data entry number (unique value) Site: Study side ID (see dat_sites.csv for full details) Core_ID: sediment core ID Dominant_genus: dominant canopy species of the plot. Depth_upper_cm: sample section upper depth. Unit = cm. Depth_lower_cm: sample section lower depth. Unit = cm. Depth_mid_cm: sample section mid depth. Unit = cm. DBD_gcm-3: sample dry bulk density. Unit = g cm-3. OM_percent: sample percent organic matter. Unit = %. Corg_percent: sample percent organic carbon. Unit = %.. Corg_density: sample density of organic carbon. Unit = g C cm-3. File: dat_decomposition_BC.csv Description: Dataset of controlled decomposition experiments conducted at Berowra Creek (BC) study site across mangrove, saltmarsh and supratidal forest ecosystem types. n/a = not available Variables site: Study side ID (see dat_sites.csv for full details) time_days: time of sample collection since deployment. Unit = days Mangrove_green: Proportion of original mass remaining at time of sample collection. Ecosystem = mangrove; Material = green tea Mangrove_rooibos: Proportion of original mass remaining at time of sample collection. Ecosystem = mangrove; Material = rooibos tea Saltmarsh_green: Proportion of original mass remaining at time of sample collection. Ecosystem = saltmarsh; Material = green tea Saltmarsh_rooibos: Proportion of original mass remaining at time of sample collection. Ecosystem = saltmarsh; Material = rooibos tea Supratidal_forest_green: Proportion of original mass remaining at time of sample collection. Ecosystem = supratidal forest; Material = green tea Supratidal_forest_rooibos: Proportion of original mass remaining at time of sample collection. Ecosystem = supratidal forest; Material = rooibos tea File: dat_decomposition_TP.csv Description: Dataset of controlled decomposition experiments conducted at Towra Point (TP) study site across mangrove, saltmarsh and supratidal forest ecosystem types. n/a = not available Variables site: Study side ID (see dat_sites.csv for full details) time_days: time of sample collection since deployment. Unit = days Mangrove_green: Proportion of original mass remaining at time of sample collection. Ecosystem = mangrove; Material = green tea Mangrove_rooibos: Proportion of original mass remaining at time of sample collection. Ecosystem = mangrove; Material = rooibos tea Saltmarsh_green: Proportion of original mass remaining at time of sample collection. Ecosystem = saltmarsh; Material = green tea Saltmarsh_rooibos: Proportion of original mass remaining at time of sample collection. Ecosystem = saltmarsh; Material = rooibos tea Supratidal_forest_green: Proportion of original mass remaining at time of sample collection. Ecosystem = supratidal forest; Material = green tea Supratidal_forest_rooibos: Proportion of original mass remaining at time of sample collection. Ecosystem = supratidal forest; Material = rooibos tea File: dat_sites.csv Description: Summary of all field study sites used across various aspects of this study. Includes names, ID, location and geomorphic and vegetation attributes. Note that not all measurements/experiments were undertaken at all sites. Variables Site name: full site name Site ID: Study side ID Latitude: Approximate latitude of study site (degrees S) Longitude: Approximate latitude of study site (degrees) Estuary type: Estuary geomorphic type Entrance opening conditions: description of whether estuary mouth is permanently, or intermittently open. Tidal range: categorical classification of site tidal range Mean annual rainfall (mm): mean annual rainfall as indicated by nearest Bureau of Meteorology weather station. Unit = mm per year Dominant woody species: list of the most dominant supratidal forest species within the study site File: dat_groundwater_CI_saltmarsh.csv Description: water level dataset collected within a groundwater standpipe located within central zone of saltmarsh at Corner Inlet (CI) study site Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm temp_SALTMARSH: logged temperature. Units = degrees Celsius level_surface_SALTMARSH: water level relative to soil surface at location of logger. Unit = m level_mAHD_SALTMARSH: water level relative to Australian Height Datum (AHD). Unit = m File: dat_groundwater_CI_supratidal_forest.csv Description: water level and salinity dataset collected within a groundwater standpipe located within seaward fringe and interior zones of supratidal forest at Corner Inlet (CI) study site n/a = not available Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm level_surfaceFRINGE*:* water level relative to soil surface at location of logger. Unit = m level_mAHD_FRINGE: water level relative to Australian Height Datum (AHD). Unit = m temp_FRINGE: logged temperature. Units = degrees Celsius EC_FRINGE: electrical conductivity (EC) of porewater. Units = µS/cm SC_FRINGE: specific conductance (SC) of porewater. Units = µS/cm at 25 degrees C salinity_FRINGE: salinity of porewater. Units = PSU level_surface_INTERIOR: water level relative to soil surface at location of logger. Unit = m level_mAHD_INTERIOR: water level relative to Australian Height Datum (AHD). Unit = m temp_INTERIOR: logged temperature. Units = degrees Celsius EC_INTERIOR: electrical conductivity (EC) of porewater. Units = µS/cm SC_INTERIOR: specific conductance (SC) of porewater. Units = µS/cm at 25 degrees C salinity_INTERIOR: salinity of porewater. Units = PSU File: dat_groundwater_CI_mangrove.csv Description: water level dataset collected within a groundwater standpipe located within central zone of mangrove at Corner Inlet (CI) study site Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm temp_MANGROVE: logged temperature. Units = degrees Celsius level_surface_MANGROVE: water level relative to soil surface at location of logger. Unit = m level_mAHD_MANGROVE: water level relative to Australian Height Datum (AHD). Unit = m File: dat_surface_BC_mangrove.csv Description: water level dataset collected on surface within central zone of mangrove at Berowra Creek (BC) study site Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm Temp: logged temperature. Units = degrees Celsius Depth_m: water depth above logger positioned on soil surface. Unit = m File: dat_surface_BC_supratidal.csv Description: water level dataset collected on surface within fringe zone of supratidal forest at Berowra Creek (BC) study site Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm Temp: logged temperature. Units = degrees Celsius Depth_m: water depth above logger positioned on soil surface. Unit = m File: dat_surface_MINN_interior.csv Description: water level dataset collected on surface within interior zone of supratidal forest at Minnamurra River (MINN-FP) study site Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm Temp: logged temperature. Units = degrees Celsius Depth_m: water depth above logger positioned on soil surface. Unit = m File: dat_surface_BC_saltmarsh.csv Description: water level dataset collected on surface within central zone of saltmarsh at Berowra Creek (BC) study site n/a = not available Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm Temp: logged temperature. Units = degrees Celsius Depth_m: water depth above logger positioned on soil surface. Unit = m File: dat_surface_MINN_fringe.csv Description: water level dataset collected on surface within fringe zone of supratidal forest at Minnamurra River Rocklow Creek (MINN-RC) study site Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm Temp: logged temperature. Units = degrees Celsius Depth_m: water depth above logger positioned on soil surface. Unit = m File: dat_surface_MINN_mangrove.csv Description: water level dataset collected on surface within central zone of mangrove at Minnamurra River Rocklow Creek (MINN-RC) study site Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm Temp: logged temperature. Units = degrees Celsius Depth_m: water depth above logger positioned on soil surface. Unit = m File: dat_surface_MINN_saltmarsh.csv Description: water level dataset collected on surface within central zone of saltmarsh at Minnamurra River Rocklow Creek (MINN-RC) study site Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm Temp: logged temperature. Units = degrees Celsius Depth_m: water depth above logger positioned on soil surface. Unit = m File: dat_surface_SWAN-I.csv Description: water level dataset collected on surface within fringe zone of supratidal forest at Swan River Intermediate (SWAN-I) study site Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm Depth_m: water depth above logger positioned on soil surface. Unit = m File: dat_groundwater_MINN-FP.csv Description: water level and salinity dataset collected within a groundwater standpipe located within seaward fringe (_FRINGE) and interior (_INTERIOR) zones of supratidal forest at Minnamurra River Floodplain (MINN-FP) study site n/a = not available Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm temp_FRINGE: logged temperature. Units = degrees Celsius EC_FRINGE: electrical conductivity (EC) of porewater. Units = mS/cm SC_FRINGE: specific conductance (SC) of porewater. Units = mS/cm at 25 degrees C salinity_FRINGE: salinity of porewater. Units = PSU level_mAHD_FRINGE: water level relative to Australian Height Datum (AHD). Unit = m level_surface_FRINGE: water level relative to soil surface at location of logger. Unit = m temp_INTERIOR: logged temperature. Units = degrees Celsius EC_INTERIOR: electrical conductivity (EC) of porewater. Units = mS/cm SC_INTERIOR: specific conductance (SC) of porewater. Units = mS/cm at 25 degrees C salinity_INTERIOR: salinity of porewater. Units = PSU level_mAHD_INTERIOR: water level relative to Australian Height Datum (AHD). Unit = m level_surface_INTERIOR: water level relative to soil surface at location of logger. Unit = m File: dat_groundwater_TIL-F.csv Description: water level and salinity dataset collected within a groundwater standpipe located within central zones of (1) saltmarsh of Salicornia quinqueflora (SMSAL); (2) saltmarsh dominated by Juncus kraussii (SMJUNC); (3) saltmarsh dominated by Phragmites australis (SMPHRAG); and (4) supratidal forest dominated by Melaleuca ericifolia at Tilba Tilba Lake Fluvial (TIL-F) study site n/a = not available Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm temp_SMSAL: logged temperature. Units = degrees Celsius EC_SMSAL: electrical conductivity (EC) of porewater. Units = mS/cm SC_SMSAL: specific conductance (SC) of porewater. Units = mS/cm at 25 degrees C salinity_SMSAL: salinity of porewater. Units = PSU level_mAHD_SMSAL: water level relative to Australian Height Datum (AHD). Unit = m level_surface_SMSAL: water level relative to soil surface at location of logger. Unit = m temp_SMJUNC: logged temperature. Units = degrees Celsius EC_SMJUNC: electrical conductivity (EC) of porewater. Units = mS/cm SC_SMJUNC: specific conductance (SC) of porewater. Units = mS/cm at 25 degrees C salinity_SMJUNC: salinity of porewater. Units = PSU level_mAHD_SMJUNC: water level relative to Australian Height Datum (AHD). Unit = m level_surface_SMJUNC: water level relative to soil surface at location of logger. Unit = m temp_SMPHRAG: logged temperature. Units = degrees Celsius EC_SMPHRAG: electrical conductivity (EC) of porewater. Units = mS/cm SC_SMPHRAG: specific conductance (SC) of porewater. Units = mS/cm at 25 degrees C salinity_SMPHRAG: salinity of porewater. Units = PSU level_mAHD_SMPHRAG: water level relative to Australian Height Datum (AHD). Unit = m level_surface_SMPHRAG: water level relative to soil surface at location of logger. Unit = m temp_SUPRATIDAL_FOREST: logged temperature. Units = degrees Celsius EC_SUPRATIDAL_FOREST: electrical conductivity (EC) of porewater. Units = mS/cm SC_SUPRATIDAL_FOREST: specific conductance (SC) of porewater. Units = mS/cm at 25 degrees C salinity_SUPRATIDAL_FOREST: salinity of porewater. Units = PSU File: dat_groundwater_TP.csv Description: water level and salinity dataset collected within groundwater standpipes located within central zones of (1) mangrove of *Avicennia marina *(MANGROVE); (2) saltmarsh dominated by Salicornia quinqueflora and Sporobolus virginicus (SMSASP); (3)saltmarsh dominated by Juncus kraussii (SMJUNC); and (4) supratidal forest dominated by Casuarina glauca at Towra Point (TP) study site n/a = not available Variables Date_Time: Date and time of record in local time zone (no daylight savings). Date Format = dd/mm/yyyy. Time format = hh:mm level_surface_MANGROVE: water level relative to soil surface at location of logger. Unit = m level_mAHD_MANGROVE: water level relative to Australian Height Datum (AHD). Unit = m temp_MANGROVE: logged temperature. Units = degrees Celsius SC_MANGROVE: specific conductance (SC) of porewater. Units = mS/cm at 25 degrees C salinity_MANGROVE: salinity of porewater. Units = PSU level_surface_SMSASP: water level relative to soil surface at location of logger. Unit = m level_mAHD_SMSASP: water level relative to Australian Height Datum (AHD). Unit = m temp_SMSASP: logged temperature. Units = degrees Celsius SC_SMSASP: specific conductance (SC) of porewater. Units = mS/cm at 25 degrees C salinity_SMSASP: salinity of porewater. Units = PSU level_surface_SMJUNC: water level relative to soil surface at location of logger. Unit = m level_mAHD_SMJUNC: water level relative to Australian Height Datum (AHD). Unit = m temp_SMJUNC: logged temperature. Units = degrees Celsius SC_SMJUNC: specific conductance (SC) of porewater. Units = mS/cm at 25 degrees C salinity_SMJUNC: salinity of porewater. Units = PSU level_surface_SUPRATIDAL_FOREST: water level relative to soil surface at location of logger. Unit = m level_mAHD_SUPRATIDAL_FOREST: water level relative to Australian Height Datum (AHD). Unit = m temp_SUPRATIDAL_FOREST: logged temperature. Units = degrees Celsius SC_SUPRATIDAL_FOREST: specific conductance (SC) of porewater. Units = mS/cm at 25 degrees C salinity_SUPRATIDAL_FOREST: salinity of porewater. Units = PSU, [Code/software] datasets can be analysed in any package or software which supports .csv files Access information Other publicly accessible locations of the data: NIL Data was derived from the following sources: NIL, [Methods] This study collates datasets collected between 2017 and 2023 from 18 study sites spanning a diversity of settings along these coastlines. Within each setting, sites were prioritised where there was adjoining saltmarsh and/or mangrove communities, to allow comparative analyses with either existing or new datasets of those communities. Therefore, our collation of study sites may be under representative of supratidal forests occurring in isolation from intertidal mangrove and saltmarsh, and should not be considered a systematic or comprehensive coverage of forest settings. The measured parameters, measurement frequency and sampling designs varied among study locations according to their specific data collection objectives., [Water level and salinity] Groundwater standpipes were installed opportunistically across five sites (TP, MIN-FP, TIL-F, CI and ONK) to enable continuous logging of water level and/or salinity concentrations and explore the role of tidal inundation and rainfall on these parameters across diverse geomorphic settings. Standpipes were constructed from PVC tubes (1.5 m long; 50mm diameter) perforated with small (2mm) holes and covered with a nylon stocking to minimise infilling by sediments. Standpipes were installed into an augured hole (~50mm diameter with any gaps around the pipes backfilled using extracted sediments) to a depth of approximately 120 cm, enabling data-logging sensors to be suspended at a depth of 100 cm below the wetland surface. Exceptions to this included the mangrove standpipe at TP (sensors at 50cm depth below surface) and the supratidal forest standpipe at ONK (salinity sensor at 87 cm; water level sensor at 69 cm). In all cases, standpipe perforations were limited to sections below the wetland surface. Water table level and groundwater salinity measurements were taken at 15-minute intervals using either integrated loggers with pressure, temperature and electrical conductivity sensors (SOLINST LTC Edge), or via the simultaneous deployment of individual pressure (HOBO U20-001-04) and temperature / electrical conductivity sensors (HOBO U24-002-C). Surface water-level loggers were deployed at BC, MIN-RC and MIN-FP sites to capture variations in surface inundation across adjacent mangrove, saltmarsh and supratidal forest communities at the scale of individual spring tide cycles. A surface logger was deployed on the surface of fringing supratidal forest at SWAN-I to capture inundation associated with either tides and/or seasonal rainfall at this location. At each site, an additional pressure logger (HOBO U20-001-04) was deployed in a tree well above the inundation limit to enable correction for atmospheric pressure and determination of water depths. Trimble R8s and R10 real-time kinematic global positioning systems (horizontal error < 8 mm; vertical error < 15 mm) was used to survey the location and elevation of each water level measurement location. Where canopy coverage hindered the use of these instruments (i.e. supratidal forests at TP and MIN-FP) elevation was estimated via manual survey from an adjacent open area using a Leica Sprinter 50 Digital Level. In both instances, elevation is reported in the Australian Height Datum (AHD), where 0 m AHD corresponds to an estimate of mean sea level across Australian coastal waters., [Biomass survey] Field vegetation surveys were carried out at 11 sites to assess variations in forest structure and aboveground biomass across study settings. Replicate survey plots were measured within each site, with plot sizes ranging from 12.5 to 400 m2 depending on the density and homogeneity of vegetation at the site. Within each quadrat all trees > 1.3 m height were measured for diameter at breast height (DBH; Casuarinas) or diameter at 10 cm (D10; Melaleucas) to enable biomass estimation following genus-specific allometric equations created by Paul et al. (2013). The inclusion of such low-statured individuals is consistent with the definition of Australia’s forests as vegetation with mature or potentially mature stand height exceeding 2 metres (ABARES 2023). Biomass values for BC, BUTCK, LES and TP are updated estimates, including new additional plots, of those reported in Kelleway et al (2021). Biomass values are presented as dry weight estimates (Mg DW ha^-1^) and were converted to aboveground carbon stock estimates using a conversion factor of 0.488 (Kelleway et al. 2021) to enable calculation of total ecosystem carbon stocks., [Belowground carbon stocks] Soil cores were collected from one or more supratidal forest plots at 12 sites to assess variations in belowground carbon stocks among settings. Core barrels of either aluminium (74 mm internal diameter) or PVC (82 cm internal diameter) were manually hammered into the ground with care taken to minimise compaction. Compaction was estimated by measuring the difference in elevation of the soil surface within the core barrel and the outer soil surface. A linear compaction correction factor was later applied along the length of each core based on these measures. In the laboratory, soil cores were sub-sampled at compaction-corrected depth intervals of ≤ 5 cm along the entire length of the core. Bulk soil was oven dried at 60°C until constant mass and weighed to determine dry bulk density and then homogenized and ground into a fine powder. Samples from BC, TP, KWP, QI, RHYLL, OYST-M, WIL-F and NORN-F were assessed for organic carbon (%Corg) via an elemental analyser, following removal of carbonates with HCl digestion, where required. Due to resource constraints, all other samples were assessed via loss-on-ignition (LOI) at 550oC for 4 h (Heiri et al., 2001). For these samples %Corg estimates were derived from organic matter concentrations using a previously developed empirical relationship for Casuarina samples (Kelleway et al. 2021), or a new empirical relationship developed for Melaleuca sites from samples subjected to both LOI and elemental analyses (Appendix S1: Figure S1). Soil carbon stocks were estimated for 0-30 cm, 0-100 cm and 100-200 cm depth ranges where core depths allowed. Stock estimates for BC, BUTCK, CRB, LES and TP were previously reported in Kelleway et al. (2021)., [Belowground decomposition] We used a modified tea bag index protocol as part of the global TeaComposition H2O program (Trevathan-Tackett et al. 2021) at two study locations (BC and TP) to compare long-term belowground organic matter decomposition in supratidal forest relative to adjacent intertidal mangrove and saltmarsh ecosystems. We monitored the biomass loss of standardised litters: green tea (Lipton; EAN 87 22700 05552 5) and rooibos tea (Lipton; EAN 87 22700 18843 8), which are proxies for more labile and more recalcitrant plant organic matter types, respectively (Trevathan-Tackett et al. 2024). The green tea contains a higher proportion of water soluble compounds (simple sugars and phenolics), while the rooibos tea consists of a higher proportion of acid insoluble compounds (e.g. lignin; Keuskamp et al. 2013). At T0 (December 2017), all pre-weighed tea bags were buried at approximately 15 cm depth. Four tea bags per plot were manually retrieved (2x green; 2x rooibos) from each site, at each of 3, 12, 24, 36 month intervals after initial deployment, though two of the 64 samples could not be found. Tea bags were rinsed in distilled water to remove attached soil, and any visible root in-growth was carefully removed prior to drying of samples (60 °C until constant mass), and re-weighing., In this study we report on new datasets of vegetation structure, carbon cycling parameters, inundation and salinity patterns across 18 sites spanning more than 4,000 km of Australia’s temperate coastlines. We report site-specific ecosystem carbon stocks ranging from 169 to 635 Mg Corg ha-1, with mean aboveground biomass (134 ± 63 Mg DW ha-1) and belowground carbon stocks to 1 m soil depth (193 ± 98 Mg Corg ha-1), which are within the range of national estimates for mangrove and saltmarsh ecosystems. While there are variations in vegetation structure between sites dominated by the genera Melaleuca and Casuarina, this does not lead to discernible differences in above- or belowground carbon stocks. Organic matter decomposition trends within supratidal forest substrates were similar to adjacent mangrove and saltmarsh, though there were differences among study sites and between labile versus recalcitrant tea litters. Soil-atmospheric flux measurements conducted at one site were also within the range of adjacent blue carbon ecosystems. We hypothesise that the high degree of preservation of belowground carbon and low soil-atmosphere flux of greenhouse gases is driven by a combination of infrequent surface inundation, high water tables and typically saline groundwater in supratidal forests, as measured across multiple settings. Supratidal forests are carbon-rich ecosystems influenced by coastal processes associated with tidal inundation. While further research is required to understand the full distribution, carbon cycling and abiotic drivers of supratidal forests, our findings strongly support their inclusion in blue carbon and other management initiatives that support the response and recovery of these endangered ecological communities in a time of change., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
oai:digital.csic.es:10261/401053
Research data Set de datos (Dataset)

Additional figures on the relation between species occurrence and environmental factors from Are fire regimes the result of top-down or bottom-up drivers?

  • Pausas, J. G.
  • Keeley, J. E.
  • Syphard, Alexandra D.
Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
oai:digital.csic.es:10261/401117
Research data Set de datos (Dataset)

Supplementary Tables Thesis AMGM Chapter I [Dataset]

Table S1.1. Phenotypic and genomic drug resistance profiles of MTBC samples collected in the Comunitat Valenciana between 2014 and 2016 [Dataset]
  • García-Marín, Ana María
The document, in Excel format, contains: Table S1.1. Phenotypic and genomic drug resistance profiles of MTBC samples collected in the Comunitat Valenciana between 2014 and 2016 Table S1.2. Isoniazid and rifampicin Minimum Inhibitory Concentrations of samples with discrepancies in phenotype-genotype resistance profiles, Supplementary Tables generated for the first chapter of the thesis titled 'Novel whole-genome sequencing approaches to study drug resistance, transmission, and evolution of the Mycobacterium tuberculosis complex'. Author: Ana María García Marín. Insituto de Biomedicina de Valencia (IBV-CSIC) and Universitat de València., Supplementary_Tables_Thesis_AMGM_Chapter1.xlsx, Peer reviewed
Advanced search