Pasar al contenido principal

Idioma del documento

Encontrados 1732195 resultado(s)
Encontradas 17322 página(s)

Adaptations versus original film premieres trends in broadband society: a comparative analysis = Tendencias de las adaptaciones versus estrenos cinematográficos en la sociedad de la banda ancha: análisis comparativo

Repositorio: DUGiDocs – Universitat de Girona

In the era of the Broadband Society, cloud journalism, and streaming, the film industry is trying to modify traditional distribution channels. The adaptation of literary classics was one of the most widespread practices to obtain well-known, quality material for new productions. The objective of this research is to understand empirically what differences are involved in industry´s major production and distribution companies´ choice between adapting preexisting material or creating an entirely..., En la era de la sociedad de la banda ancha, el cloud journalism y el streaming, la industria del cine está intentando modi-ficar los canales tradicionales de distribución. La adaptación de clásicos literarios era una de las prácticas más extendidas para conseguir material conocido y de calidad de cara a nuevas producciones. El objetivo de esta investigación es cono-cer empíricamente qué diferencias suponen para las mayores productoras y distribuidoras de la industria elegir entre adaptar...



Methylome profiling of B and T cells along multiple sclerosis disease progression: a pilot study

Repositorio: DUGiDocs – Universitat de Girona

Multiple sclerosis (MS) is a chronic, inflammatory, autoimmune and neurodegenerative disease characterized by the infiltration of autoreactive immune cells into the central nervous system that leads to axonal damage, demyelination, and ultimately, neurodegeneration. The aetiology of MS is still unknown, but strong scientific evidence points to a complex interaction between genetic and environmental factors mediated by epigenetics. One of the most studied epigenetic mechanisms is the methylation..., L'Esclerosi Múltiple (EM) és una malaltia crònica, inflamatòria, de naturalesa autoimmune caracteritzada per la infiltració de cèl·lules immunitàries autoreactives (com les cèl·lules B i T), que desencadenen dany axonal, desmielinizació, i finalment, neurodegeneració. A pesar que l'etiologia de la EM és encara desconeguda, forts indicis indiquen que es deu a una complexa interacció entre factors genètics i ambientals mediats per l'epigenètica. Un dels mecanismes epigenètics més..., Programa de Doctorat en Biologia Molecular, Biomedicina i Salut



Local food experiences before and after COVID-19: a sentiment analysis of EWOM

Repositorio: DUGiDocs – Universitat de Girona

Purpose – To use Natural Language Processing (NLP) to explore how people feel and what they share online about their experiences with food. In addition, to learn how these experiences have evolved recently, differences before and during the crisis COVID -19 will be explored. Methodology/Design/Approach – A total of 35,001 reviews of restaurants and local cuisine establishments near tourist attractions in the city of Ayutthaya, Thailand, were extracted from the Google Local Guide platform....



A Conceptual Analysis of the Funds of Knowledge and Identity Approach from an Eco-functional Perspective

Repositorio: DUGiDocs – Universitat de Girona

The article situates the Funds of Knowledge (FoK) approach and the Funds of Identity (FoI) theory in the context of the eco-functional perspective. It proposes to understand the “funds” as external factors of extra-cerebral organizations, as both refer to products of historically accumulated social labor. Furthermore, the article lays out that similar to the dynamic features of external factors in developing functional psychic organizations, funds of knowledge and identity have to be considered..., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Second author (M. Esteban-Guitart) acknowledges the support of the project ref. PID2021-127143NB-I00 funded by MCIN/AEI/10.13039/501100011033FEDER, “A way of making Europe”, by the “European Union” and by Government of Catalonia, ICREA2021 award



In search of the ideal husband: Could inequality in the pre-industrial era be measured through dowries? North-eastern Catalonia, 1750-1825, En busca del marido ideal: ¿Es posible medir la desigualdad en la era preindustrial a través de las dotes? Nordeste de Cataluña, 1750-1825

Repositorio: DUGiDocs – Universitat de Girona

This paper explores the possibilities that dowries may offer to study inequality in the pre-industrial era. We argue that, mostly, in rural societies with impartible inheritance, families competed to join the heir of an estate that would allow them to maintain or even improve their socio-economic status by means of paying the best possible dowry. Hence, dowries may be an indicator of family wealth and, therefore, disparities in dowry amounts could be informing about economic..., En este artículo exploramos las posibilidades que ofrecen las dotes para el estudio de la desigualdad durante la era preindustrial. Argumentamos que, especialmente, en las sociedades rural de herencia indivisa las familias competían, a través del pago de la mejor dote posible, para unirse al heredero de un patrimonio que les permitiese mantener o incluso mejorar su estatus socioeconómico. En consecuencia, las dotes serían un indicativo de la riqueza familiar, de modo que las disparidades en su..., This work is supported by the Spanish Ministry of Science and is also part of the research project from the Centre de Recerca d’Història Rural (University of Girona) entitled “¿Cam-bio social sin grupos sociales? El seguimiento de trayectorias colectivas en el pasado desde una perspectiva relacional (siglos xiv-xx)” (PGC2018-096350-B-100 and PRE2019-089410)



Positive Facets of Suffering, Meaningful Moments, and Meaning Fulfilment: A Qualitative Approach to Positive Existential Issues in Trauma-Exposed University Students

Repositorio: DUGiDocs – Universitat de Girona

The possible positive consequences of trauma and its relationship to existential aspects are receiving increasing attention. However, little is known about how young individuals perceive the changed status of these profound aspects of their lives. This study aimed to explore and identify the themes of the possible positive aspects of trauma-related suffering, the most meaningful moments, and the perception of meaning realization in young individuals. A total of 139 trauma-exposed Mexican..., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature



Safety and immunogenicity of a recombinant protein RBD fusion heterodimer vaccine against SARS-CoV-2

Repositorio: DUGiDocs – Universitat de Girona

HIPRA-HH-1 study group: Eva Bonfill, Omar Anagua, Faisury Caicedo, Clara Castán, Fauno Guazina, Sara Messeguer, Marta Aldea, Anna Vilella, Sandra Serrano, Lorna Leal, Judit Pich, Jocelyn Nava, Karla Escobar, Joan Albert Arnaiz, Alex Soriano, José Ríos, Teresa Botta, Ignasi Esteban, Carmen Pastor, Montserrat Plana, Gemma Domenech, Silvia Marfil, Carla Rovirosa, Raquel Ortiz, Daniel Perez-Zsolt, Marçal Gallemí, Edwards Pradenas, Dàlia Raïch-Regué, Benjamin Trinité, Jordana Muñoz-Basagoiti,..., In response to COVID-19 pandemic, we have launched a vaccine development program against SARS-CoV-2. Here we report the safety, tolerability, and immunogenicity of a recombinant protein RBD fusion heterodimeric vaccine against SARS-CoV-2 (PHH-1V) evaluated in a phase 1-2a dose-escalation, randomized clinical trial conducted in Catalonia, Spain. 30 young healthy adults were enrolled and received two intramuscular doses, 21 days apart of PHH-1V vaccine formulations [10 µg (n = 5), 20 µg (n = 10),...



Highly Selective C(sp3)-H Bond Oxygenation at Remote Methylenic Sites Enabled by Polarity Enhancement

Repositorio: DUGiDocs – Universitat de Girona

A detailed study on the C(sp3)–H bond oxygenation reactions with H2O2 catalyzed by the [Mn(OTf)2(TIPSmcp)] complex at methylenic sites of cycloalkyl and 1-alkyl substrates bearing 19 different electron-withdrawing functional groups (EW FGs) was carried out. Oxidations in MeCN were compared to the corresponding ones in the strong hydrogen bond donating (HBD) solvents 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and nonafluoro tert-butyl alcohol (NFTBA). Formation of the products deriving from..., Financial support from European Research Council, AdvG 883922 (M.C.), Spain Ministry of Science, MINECO, PID2021-129036NB-I00 (M.C.), and Generalitat de Catalunya (ICREA Academia to M.C. and 2021SGR00475)



Site selective gold(i)-catalysed benzylic C–H amination via an intermolecular hydride transfer to triazolinediones

Repositorio: DUGiDocs – Universitat de Girona

Triazolinediones are known as highly reactive dienophiles that can also act as electrophilic amination reagents towards enolisable C–H bonds (ionic pathway) or weak C–H bonds (free radical pathway). Here, we report that this C–H amination reactivity can be significantly extended and enhanced via gold(I)-catalysis. Under mild conditions, several alkyl-substituted aryls successfully undergo benzylic C–H aminations at room temperature. The remarkable site selectivity that is observed points..., A. P. thanks the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00. A. P. is a Serra Húnter Fellow and ICREA Academia Prize 2019



Single─Not Double─3D-Aromaticity in an Oxidized Closo Icosahedral Dodecaiodo-Dodecaborate Cluster

Repositorio: DUGiDocs – Universitat de Girona

3D-aromatic molecules with (distorted) tetrahedral, octahedral, or spherical structures are much less common than typical 2D-aromatic species or even 2D-aromatic-in-3D systems. Closo boranes, [BnHn]2– (5 ≤ n ≤ 14) and carboranes are examples of compounds that are singly 3D-aromatic, and we now explore if there are species that are doubly 3D-aromatic. The most widely known example of a species with double 2D-aromaticity is the hexaiodobenzene dication, [C6I6]2+. This species shows π-aromaticity..., The authors thank the Spanish Ministerio de Ciencia e Innovación for projects PID2020-113711GB-I00, PID2021-127423NB-I00, PID2022-138861NB-I00, PID-2019-106830GB-I00, and CEX2021-001202-M, the Generalitat de Catalunya for projects 2021SGR623 and 2021SGR442, and the Swedish Research Council for project 2019-05618. A.P. is a Serra Húnter Fellow and ICREA Academia Prize winner (2019). S.E. thanks Universitat de Girona and DIPC for an IFUdG2019 PhD fellowship



Expression of miR-138 in cryopreserved bovine sperm is related to their fertility potential

Repositorio: DUGiDocs – Universitat de Girona

MicroRNAs (miRNAs) are small, single-stranded, non-coding RNA molecules of 22–24 nucleotides that regulate gene expression. In the last decade, miRNAs have been described in sperm of several mammals, including cattle. It is known that miRNAs can act as key gene regulators of early embryogenesis in mice and humans; however, little is known about the content, expression, and function of sperm-borne miRNAs in early bovine embryo. In this study, total sperm RNA was isolated from 29 cryopreserved..., The authors acknowledge the support from the Ministry of Science and Innovation, Spain (IJC2019-039615-I and PID2020-113320RB-I00), the European Union’s Horizon 2020 research and innovation scheme under the Marie Sklodowska-Curie grant agreement No. 801342 (Techniospring INDUSTRY; TECSPR-19–1-0003) and the Regional Government of Catalonia (2017-SGR-1229 and 2021-SGR-00900) and the Catalan Institution for Research and Advanced Studies (ICREA)



Computational-Aided Engineering of a Selective Unspecific Peroxygenase toward Enantiodivergent β-Ionone Hydroxylation

Repositorio: DUGiDocs – Universitat de Girona

Unspecific peroxygenases (UPOs) perform oxyfunctionalizations for a wide range of substrates utilizing H2O2 without the need for further reductive equivalents or electron transfer chains. Tailoring these promising enzymes toward industrial application was intensely pursued in the last decade with engineering campaigns addressing the heterologous expression, activity, stability, and improvements in chemo- and regioselectivity. One hitherto missing integral part was the targeted engineering of..., J.M. thanks the Friedrich-Naumann-Stiftung für die Freiheit for a PhD scholarship. D.H. thanks the Friedrich-Ebert Stiftung for a PhD scholarship. M.J.W. and J.M. thank the Bundesministerium für Bildung und Forschung (Maßgeschneiderte Inhaltsstoffe 2, 031B0834A) and M.J.W., J.M., and D.H. thank the German Research Foundation (DFG, project ID 43649874, TP A05, RTG 2670) for generous funding. M.G.B. thanks the Spanish MICINN (Ministerio de Ciencia e Innovación) for PID2019-111300GA-I00 project...



Reversible Deactivation of Manganese Catalysts in Alkene Oxidation and H2O2 Disproportionation

Repositorio: DUGiDocs – Universitat de Girona

Mononuclear MnII oxidation catalysts with aminopyridine-based ligands achieve high turnover-number (TON) enantioselective epoxidation of alkenes with H2O2. Structure reactivity relations indicate a dependence of enantioselectivity and maximum TON on the electronic effect of peripheral ligand substituents. Competing H2O2 disproportionation is reduced by carrying out reactions at low temperatures and with slow addition of H2O2, which improve TONs for alkene oxidation but mask the effect of..., Financial support was provided by the Ministry of Education, Culture and Science of the Netherlands (Gravity Program 024.001.035 to W.R.B.) and the Advanced Research Center Chemical Building Blocks Consortium (2021.038.C.RUG.8). Support by the Spanish Ministry of Science, Innovation and Universities; (PhD grant FPU16/04231 to L.V.) and Generalitat de Catalunya (ICREA Academia Award to M.C. and 2017 SGR 00475) is acknowledged



Resolving Oxygenation Pathways in Manganese-Catalyzed C(sp3)–H Functionalization via Radical and Cationic Intermediates

Repositorio: DUGiDocs – Universitat de Girona

The C(sp3)-H bond oxygenation of the cyclopropane-containing mechanistic probes 6-tert-butylspiro[2.5]octane and spiro[2.5]octane with hydrogen peroxide catalyzed by manganese complexes bearing aminopyridine tetradentate ligands has been studied. Mixtures of unrearranged and rearranged oxygenation products (alcohols, ketones, and esters) are obtained, suggesting the involvement of cationic intermediates and the contribution of different pathways following the initial hydrogen atom transfer..., This work was supported by the University of Rome“TorVergata”(Project E84I20000250005), the Spanish Ministry ofScience, Innovation, and Universities (PGC2018-101737-B-I00 to M.C. and PhD grant FPU16/04231 to L.V.) and Generalitatde Catalunya (ICREA Academia Award to M.C. and 2017-SGR00264



A Common Active Intermediate in the Oxidation of Alkenes, Alcohols and Alkanes with H2O2 and a Mn(II)/Pyridin-2-Carboxylato Catalyst

Repositorio: DUGiDocs – Universitat de Girona

The mechanism and the reactive species involved in the oxidation of alkenes, and alcohols with H2O2, catalysed by an in situ prepared mixture of a MnII salt, pyridine-2-carboxylic acid and a ketone is elucidated using substrate competition experiments, kinetic isotope effect (KIE) measurements, and atom tracking with 18O labelling. The data indicate that a single reactive species engages in the oxidation of both alkenes and alcohols. The primary KIE in the oxidation of benzyl alcohols is ca. 3...



Addressing energy poverty through technological and governance innovation

Repositorio: DUGiDocs – Universitat de Girona

Background: Energy poverty has gained much traction over the last decades, holding both high multidisciplinary conceptual value, but also profound implications from a social policy perspective, being closely linked to the quality of life and well-being. The goal of our study is to evaluate recent measures aimed at tackling energy poverty in Europe by analysing the extent to which they are innovative on technological and governance dimensions. We do so by building an analytical tool which..., 1



Characterization of NF1 (+/+), (+/-), and (-/-) iPSC lines generated through genetic editing using CRISPR/Cas9

Repositorio: DUGiDocs – Universitat de Girona

The use of pluripotent stem cell lines from oocytes and embryos has been a cause of ethical discussion. For that reason, reprogramming somatic cells to produce induced pluripotent stem cells (iPSCs) has been an alternative to avoid this issue and an opportunity to develop new therapeutic strategies and disease models. In the last few years, researchers of the ‘Hereditary Cancer’ group in the ‘Germans Trias i Pujol Research Institute (IGTP)’ have been using this iPSC technology to study...



Better, not more, lighting: Policies in urban areas towards environmentally-sound illumination of historical stone buildings that also halts biological colonization

Repositorio: DUGiDocs – Universitat de Girona

Anthropogenic or Artificial light at night (ALAN) pollution, or more simply light pollution, is an issue of increasing concern to the general public, as well as to scientists and politicians. However, although advances have been made in terms of scientific knowledge, these advances have not been fully transferred to or considered by politicians. In addition, illumination of stone monuments in urban areas is an emerging contribution to ALAN pollution that has scarcely been considered to date...., 11



Vigilance has mainly a social function in a wild group of spider monkeys (Ateles geoffroyi)

Repositorio: DUGiDocs – Universitat de Girona

Vigilance is a widespread behavior that allows individuals to socially acquire information and/or effectively detect potential risks posed by predators and conspecifics. In this study, we aimed to investigate how social factors (i.e., subgroup size, number of males and immatures in the subgroup, presence of fission and fusion events, subgroup activity), individual characteristics (i.e., sex, presence of dependent offspring) and possible vulnerability to predation (i.e., being in smaller...



Posible rol de las neuregulinas en la fisiología del tejido adiposo en asociación con obesidad y diabetes mellitus tipo 2

Repositorio: DUGiDocs – Universitat de Girona

Different studies link the metabolic alterations of obesity with imbalances in neuregulin 4 levels. In this study we hypothesize that signaling of neuregulin isoforms (NRG) produced through ERBB receptors in human adipose tissue could impact on adipose tissue physiology and insulin sensitivity in obese patients. To test this hypothesis, we aimed to investigate the possible relationship between neuregulins and ERBB receptors in adipose tissue and circulating NRG4 with obesity and insulin..., Diferents estudis vinculen les alteracions metabòliques de l'obesitat amb desequilibris en els nivells de neuregulina 4. En aquest estudi hipotetitzem que la senyalització de les isoformes de neuregulina (NRG) produïda a través de receptors ERBB en teixit adipós humà, podria impactar en la seva fisiologia i en sensibilitat a la insulina en pacients obesos. Per provar aquesta hipòtesi, hem plantejat investigar la possible relació entre les neuregulines i els receptors ERBB en teixit adipós..., Programa de Doctorat en Biologia Molecular, Biomedicina i Salut



Assessing the habitat and anthropogenic drivers on meso- and macromammals diversity in the western Mediterranean basin

Repositorio: DUGiDocs – Universitat de Girona

In the Mediterranean Basin, considered a biodiversity hotspot, 184 mammal species are found. Its presence and abundance inside the region are influenced by several factors. This work aims to determine if landscape heterogeneity, anthropization degree and variation of both during the last 30 years affect the alpha and beta diversity of terrestrial macro and meso-mammals in this region. To do so, data from camera trapping in 29 Carnivores Permanent Tracking Plots (PSPCs) located along Catalonia..., 15



A step towards rational design of carbon nanobelts with tunable electronic properties

Repositorio: DUGiDocs – Universitat de Girona

Belt-shaped aromatic compounds are among the most attractive classes of radial π-conjugated nanocarbon molecules with unique physical and chemical properties. In this work, we computationally studied a number of all-carbon and heteroatom-bridged nanobelts, as well as their inclusion complexes with fullerene C60. Our results provide a useful guide for modulating the electronic properties of the nanobelts. An in-depth analysis of the ground and excited state properties of their complexes has..., We are grateful for financial support from the Spanish Ministerio de Ciencia e Innovación (Network RED2018-102815-T, project PID2020-113711GB-I00, and Juan de la Cierva contract IJC2019-039846-I to A. J. S.), the Catalan Conselleria de Recerca i Universitats of the Generalitat de Catalunya (project 2021SGR623 and contract 2020 FISDU 00345 to G. G.) and the University of Girona (María Zambrano fellowship REQ2021_C_31 to O. A. S.). A. J. S. gratefully acknowledges Poland's high-performance...



Nanotechnology-based strategies in cancer medicine: a comprehensive review

Repositorio: DUGiDocs – Universitat de Girona

Cancer remains one of the leading causes of death worldwide and poses a major challenge in health research, requiring constant innovation in order to make significant progress. In recent years, nanotechnology has emerged as a promising technology with the potential to revolutionize cancer medicine. This bibliographic review provides a comprehensive overview of the available literature on the use of nanotechnology in cancer research. The superior properties and diversity of nanomaterials make..., 3



On families of Bowen-Series-like maps for surface groups

Repositorio: DUGiDocs – Universitat de Girona

We review some recent results on a class of maps, called Bowen-Series-like, obtained from a class of group presentations for surface groups. These maps are piecewise homeomorphisms of the circle with finitely many discontinuities. The topological entropy of each map in the class and its relationship with the growth function of the group presentation is discussed, as well as the computation of these invariants, This work has been possible due to the financial support of our respective institutions, the MICINN grant number PID2020-118281GB-C31 and the Severo Ochoa and María de Maeztu Program for Centers and Units of Excellence in R&D (CEX2020-001084-M) funded by MCIN/AEI/10.13039/501100011033. We thank CERCA Programme/Generalitat de Catalunya for institutional support



Optimization of electromethanogenesis: effect of operating condition under mesophilic conditions

Repositorio: DUGiDocs – Universitat de Girona

In 2019, over 90% of the global population live exposed to poor air quality, which represents a significant threat to public health worldwide. In indoor spaces, where humans spend most of their time, can reach higher concentrations of pollutants such as CO2, a greenhouse gas contributing to climate change. Therefore, there is an increasing need to develop technologies to mitigate atmospheric CO2 and enhance indoor air quality, which has great relevance for human health, but also technologies..., 9



Integrating sustainability in mathematics education and statistics education: A systematic review

Repositorio: DUGiDocs – Universitat de Girona

If we are to understand and address today's social, environmental and economic crises through education, we must introduce education for sustainable development (ESD) into classrooms and approach it from an integrated perspective. In so doing, this study aims to provide an overview of the current status of the still-emerging research agenda on the integration of ESD into mathematical education and statistical education. To this end, we conducted a systematic review of Scopus and Web of...



Standardized protocol for reproductive phenology monitoring of fucalean algae of the genus Cystoseira s.l. with potential for restoration

Repositorio: DUGiDocs – Universitat de Girona

Active marine restoration is strongly encouraged to prevent the loss of the valuable habitats formed by Cystoseira sensu lato species, since they enhance biodiversity and preserve ecosystem functions and services. Current restoration interventions are mainly based on recruitment enhancement methods by deploying bags with fertile receptacles in situ or by outplanting juveniles grown ex situ under laboratory conditions. These methods allow the recovery of endangered species avoiding the depletion...



That Obscure Object of Desiring Literal Meaning: A critique to 'moderate' legal cognitivism

Repositorio: DUGiDocs – Universitat de Girona

The main idea of The Making of Constitutional Democracy: From Creation to Application of Law (2021) is that democracy and constitutionalism rely on the distinction between 'law-creation' and 'law-application'. This distinction - according to Paolo Sandro - would be not only crucial for the legitimacy of constitutional democracy but also a necessary condition within its conceptual structure. This brief article is organized in two parts. In the first part I show that, whilst...



Methodologies to Evaluate the Micromechanics Flexural Strength Properties of Natural-Fiber-Reinforced Composites: The Case of Abaca-Fiber-Reinforced Bio Polyethylene Composites

Repositorio: DUGiDocs – Universitat de Girona

There is growing emphasis on developing green composites as a substitute for oil-based materials. In the pursuit of studying and enhancing the mechanical properties of these composites, tensile tests are predominantly employed, often overlooking the flexural properties. This study focuses on researching the flexural properties of abaca-fiber-reinforced bio-based high-density polyethylene (BioPE) composites. Specifically, composites containing 30 wt% of abaca fiber (AF) were treated with a..., The authors wish to acknowledge the financial support of the Spanish Ministry of Science and Innovation to the projects CICEP (TED2021-1310398-C33)



Underwater Laser Scanner: Ray-Based Model and Calibration

Repositorio: DUGiDocs – Universitat de Girona

Underwater 3-D perception is crucial for autonomous manipulation and mapping. Using a mirror-galvanometer system to steer a laser line projector and using triangulation with a camera it is possible to produce full 3-D perception, while avoiding moving the sensor with respect to the scene. This paper presents a ray-based model of a laser scanner and a calibration method for such a model. The model takes into account the distortion introduced to the system by the flat viewports used for both the...



Numerical and experimental study of notched composite plates under envelope loadings: envelope validation method

Repositorio: DUGiDocs – Universitat de Girona

The design and certification of aeronautical structures is based on the principle of the test pyramid: numerous coupon tests are used as a basis for the design of increasingly larger and fewer tests



Investigation of failure mechanisms in L-angle composite laminates

Repositorio: DUGiDocs – Universitat de Girona

Highly curved composites such as L-angle composite laminates, used at the junction between two perpendicular panels experience unfolding failure. These laminates are typically used in critical components such as aircraft wing spars, hence understanding of their failure mechanisms becomes crucial. Unfolding failure is typically associated with the interlaminar stresses, eventually leading to sudden delamination, in the curved sections when they are loaded under an opening bending moment. However...



Determination and modelization of mode I interlaminar fracture thoughness on 2D woven oxide/oxide composite using double cantilever beam test

Repositorio: DUGiDocs – Universitat de Girona

Ceramic Matrix Composites are light materials with excellent mechanical properties at high temperature, which make them potential candidates for such industrial applications. Specifically, laminated Oxide/Oxide CMCs are relevant for moderate thermo-mechanical loadings because of the advantageous trade-off between their mechanical properties and their cost. For such laminated composite materials, study the initiation and propagation of delamination between plies remains a key point in order to...



Testing of composite stiffened panels made by resin infusion

Repositorio: DUGiDocs – Universitat de Girona

Composite sandwich structures often have complicated geometry that limits optical access, which prevents deployment of full field imaging techniques, such as Digital Imaging Correlation (DIC) and Thermoelastic Stress Analysis (TSA). During testing, it is difficult to use traditional inspection approaches to internal regions where debonds may occur in the interfaces between the face sheets and core material. Here, mirrors are utilised to allow optical access to face sheets of sandwich specimens...



Experimental investigation of the loading rate dependency of the non-linear damageable behaviour of carbon/epoxy laminates

Repositorio: DUGiDocs – Universitat de Girona

The problematic of the presented work is part of a context, where the design of composite structures subjected to a crash or an impact, requires to improve the predictivity of numerical simulations with respect to the sensitivity of the evolution of the degradation mechanisms in the presence of important strain rate gradients. While the influence of increasing loading velocity on the reversible shear behavior of CMOs has been the subject of much work, a limited amount of study is available in...



Evaluation of a new experimental device for shear modulus measurement

Repositorio: DUGiDocs – Universitat de Girona

The identification of the different stiffnesses of an orthotropic behavior of laminate composite or 3D printing material needs different samples geometries. To avoid this, this paper is dedicated to study an experimental device for the characterization of shear modulus, the "single cube apparatus" (SCA), previously developed for wood using the same specimen geometry for all the stiffnesses coefficients



Investigating shear performance of PMCS

Repositorio: DUGiDocs – Universitat de Girona

Understanding the shear performance of polymer matrix composites (PMCs) using a multiscale methodology requires novel in situ experimental techniques at each length scale. One limitation of the multiscale paradigm is inadequate experimentation at the microscale. In addition, limited investigation exists at the mesoscale to understand progressive damage phenomena. And lastly, although new experimental methods are required for in situ damage prognosis, many still need to provide the means of...



Development of tensile specimens with bonded continuous protective layers for the accurate tensile failure strain determination of unidirectional carbon/epoxy composites

Repositorio: DUGiDocs – Universitat de Girona

Carbon fibre/epoxy (CF/EP) composites have been applied successfully in high performance applications such as aerospace, motorsports and recreation etc. for decades primarily for their outstanding mechanical properties paired with low density. Nowadays, weight reduction e.g. in the passenger car sector is inevitable to enable progress towards (i) reducing the emissions of traditional combustion engine powered vehicles and (ii) accommodating the heavy energy storage devices of electric motor...



Multiple amplitude testing method for detection of local damage evolution in bast fiber-reinforced polymers

Repositorio: DUGiDocs – Universitat de Girona

New resource efficiency requirements create new demands on the materials used. Conventional fiber-reinforced polymers with a thermoset matrix and synthetic reinforcing fibers are creating significant challenges for material recycling and thus for sustainable application. Natural fiber-reinforced polymers with thermoplastic matrix offer high recycling potential as well as lower primary energy consumption in the production of composite material. In particular, natural bast fibers based on flax...



Detecting and characterising interfacial fracture through the face sheets of sandwich structures using mirror-assisted imaging techniques

Repositorio: DUGiDocs – Universitat de Girona

Composite sandwich structures often have complicated geometry that limits optical access, which prevents deployment of full field imaging techniques, such as Digital Imaging Correlation (DIC) and Thermoelastic Stress Analysis (TSA). During testing, it is difficult to use traditional inspection approaches to internal regions where debonds may occur in the interfaces between the face sheets and core material. Here, mirrors are utilised to allow optical access to face sheets of sandwich specimens...



Measuring the compressive behaviour of glass/carbon fibre hybrid composite with a 4-point flexural test

Repositorio: DUGiDocs – Universitat de Girona

Carbon fibre composites typically provide excellent mechanical properties with a high strength-to- weight ratio, making this material favourable for lightweight structural applications. However, compressive behaviour is one of the weaknesses of composites due to the low failure strain and brittle failure characteristics. Hybridising low-strain carbon fibre with higher-strain fibre is a method to improve the compressive failure strain of carbon fibre composites. The applied load can be...



Hydrogen diffusion through thin-ply composites

Repositorio: DUGiDocs – Universitat de Girona

There is a growing need to reduce the CO2 emissions related to transportation (24% of energy related emissions) to achieve the commitments of the Paris agreement. Hydrogen technology has therefore emerged as a sustainable alternative with applications in aviation, maritime and road transportation. The storage of hydrogen, however, remains a key challenge in adopting the new technology as hydrogen liquefies at -253°C and even in its liquid form has low specific density [1]. Therefore, larger...



Experimental and numerical investigation on bearing behavior of hybrid thin/thick-ply composite laminates

Repositorio: DUGiDocs – Universitat de Girona

Composite materials have found usage in many industrial applications and more recently they are increasingly used in aerospace panels and airframes. The use of composites in the aerospace industry is justified by their excellent specific modulus and strength. When a composite laminate is loaded in tension with increasing load it will eventually fail (macroscopically). The failure is preceded by initiation and evolution of several microdamage modes and if the amount of damage increases during,...



Investigation of thickness effects in bi-axially braided glass fibre laminates using a parametrised RVE model

Repositorio: DUGiDocs – Universitat de Girona

In this paper a novel approach is introduced to address manufacturing-induced size effects in braided composites. This approach involves the use of a fully parameterised representative volume element (RVE) model. To investigate the influence of structural parameters associated with thickness, such as nesting-induced undulation, roving displacements and fibre volume content, on the mechanical properties of bi-axially braided composites, a Python-based tool has been developed that combines...



Failure analysis of hybrid glass/carbon thin ply laminates subjected to tensile loading

Repositorio: DUGiDocs – Universitat de Girona

Micro-damage such as fiber/matrix interface debonds, matrix cracks, delaminations and fiber breaks forming during the service life of composites is a significant limiting factor in many applications. Matrix cracks in off-axis layers are typically the first damage mode to occur in laminates due to weak properties in the transverse direction to the fibers and it is the main cause for the appearance of subsequent damage modes – delaminations and fiber breaks. In the present work, thin-ply...



Lay-up effects on the fatigue life of open-hole multidirectional composite laminate specimens subjected to cyclic shear loading

Repositorio: DUGiDocs – Universitat de Girona

Composites have gained widespread use in a range of industrial applications. In many cases, they are subjected to cyclic loads which means their fatigue performance must be evaluated and predicted. Despite their wide use, assessing fatigue performance remains a challenging task due to the heterogenous nature of composites, which results in damage being arrested and redirected as it travels through the interfaces of the composite. Although failure is dependent on lay-up and loading, most fatigue...



Fatigue failure prediction in GFRP composite laminates: comprehensive fatigue damage model, software implementation in SAMCEF and benchmark tests

Repositorio: DUGiDocs – Universitat de Girona

The estimation of the load carrying capabilities of glass fibre reinforced polymer (GFRP) laminated composite structures is challenged by the heterogeneity and intricate arrangement of the material components.In this work, a comprehensive approach to the prediction of damage in a GFRP laminated composite structures is presented



Comparison between the inter- and intra-laminar fatigue crack propagation as obtained from DCB and cross-ply specimens

Repositorio: DUGiDocs – Universitat de Girona

The fatigue life of multi-directional composite laminates is characterised, in the earlier stages, by the initiation and propagation of multiple off-axis cracks. These cracks involve the entire ply thickness and propagate along the fibre direction. In a schematic geometrical representation, thus, the crack faces belong to the 1-3 plane, where 1 is the fibre direction and 3 is the through-the-thickness direction



Assessment of mode I fatigue delamination of composites through a rapid testing method

Repositorio: DUGiDocs – Universitat de Girona

This work aims to use a new testing procedure based on the damage evolution in the fatigue specimen developed for metallic materials [2]. The method consists of stepwise increasing load amplitude up to the complete fracture of the specimen while monitoring the fatigue damage using the compliance of the specimen throughout the test



Multiple crack initiation in cross-ply laminates under spectrum loadings

Repositorio: DUGiDocs – Universitat de Girona

The present work investigates the damage evolution in glass/epoxy cross-ply laminates under variable amplitude spectrum loadings. The attention is focussed on the effect of variable amplitude loadings on the life to the initiation of transverse cracks and the crack density evolution. Cross-ply specimens were manufactured through the infusion process using unidirectional glass fibres and an epoxy matrix to obtain a semi-transparent material, where transverse cracks could be detected using a back...



Prediction of the elastic properties and fatigue damage evolution in bundle-based composites for wind turbines

Repositorio: DUGiDocs – Universitat de Girona

Wind turbines represent a highly sustainable mean for the energy production. In the last years, the length of rotor blades has increased to produce more power without making taller towers. In fact, for a rotor blade of twice the length, the power output is quadrupled. Structural light-weight materials with high specific stiffness and capable of withstanding cyclic loadings are required. Composite materials play an important role in the rotor blade assembly. Multidirectional laminates made from...



Mechanical joining technology between metal and carbon fiber reinforced polymers through punching

Repositorio: DUGiDocs – Universitat de Girona

The joint between different lightweight materials plays a significant role in multi-material design of structural components for automotive industry, aiming to reduce the vehicle’s weight without compromising performance or safety. Yet, conventional mechanical joining technologies between metals and Carbon Fibre Reinforced Polymers (CFRP) either create the need of drilling a hole in the composite material, leading to damages which reduce the load bearing capacity, or increase the weight of the...



Static and fatigue performance of wind turbine blade epoxy adhesives

Repositorio: DUGiDocs – Universitat de Girona

In this research work, short-glass fiber modified and core-shell rubber particle modified epoxy adhesives used in the wind turbine rotor blade assembly are considered for developing four different hybrid adhesives. The adhesives are fabricated by two different methods, an automated machine mixing method (M1) at the facilities of Gurit (UK) Ltd and a manual mixing (M2) at CCLab/EPFL



Numerical modelling and experimental behaviour of adhesive joints under dynamic loading

Repositorio: DUGiDocs – Universitat de Girona

Adhesive joints play an essential role in the aeronautical industry, but the methods to dynamically characterize these joints are not standardized. In addition, there is a lack of research regarding the use of composite specimens. The Butt Joint (BJ) and Single Lap Shear (SLS) tests are intended to obtain the traction and shear strengths of adhesive joints. The objective of the present study is to define suitable specimens for the characterization of the tensile and shear strengths of the FM...



Identification of damage initiation and progression in open hole composites using acoustic emission and digital image correlation

Repositorio: DUGiDocs – Universitat de Girona

The progression of damage in multidirectional open hole composite specimens subjected to tensile loading is dependent on the properties of the constituent materials as well as the laminate lay-up (fibre orientations, ply thickness). The use of permanently integrated sensors to obtain structural health information from composites is promising, but it is necessary to validate the ability of such systems to distinguish between different damage mechanisms that occur in composites. Acoustic...



Influence of voids on thick DCB joint behavior

Repositorio: DUGiDocs – Universitat de Girona

In this work, the influence of void content on the fracture behavior of thick double cantilever beam (DCB) joints was investigated. Three sets of thick DCB joints with optimized grooved geometry and different void contents were prepared with glass fiber epoxy composite adherends and a two-component toughened epoxy adhesive (SikaPower®-830) designed for wind turbine blade manufacturing. The thickness of the adhesive layer was 10 mm. The test was conducted with an MTS Landmark servo-hydraulic...



Damage sequence of impact events on 3d-printed composite laminates with quasi-static indentation test

Repositorio: DUGiDocs – Universitat de Girona

Additive manufacturing techniques are nowadays common in many industrial sectors due to their versatility, fast product development and reduced cost. Although at a different level of use, quick and easy manufacturing of lightweight composite parts, facilitates the introduction of additive manufacturing in aerospace and automobile industries. However, this type of components are susceptible of receiving impacts during their service-life. While this can be one of the most compromising events for...



Assessment of the qualities of carbon nanotube sensors for structural health monitoring of composites

Repositorio: DUGiDocs – Universitat de Girona

In this work, carbon nanotube (CNT) filaments are used for monitoring the strain of carbon fibre- reinforced thermoplastic laminate plates by means of the piezoelectric properties of those filaments



Statistical study of the process parameters to achieve continuous consolidation on thermoplastic composites

Repositorio: DUGiDocs – Universitat de Girona

The objective of this study is to investigate the effects of different process parameters on the final quality of the manufactured part when adapting the Glide Forming technology to thermoplastic composite materials



Monitoring of water absorption and its effects on mechanical performance of thick GFRP structures by integrated smart sensors

Repositorio: DUGiDocs – Universitat de Girona

In many applications, such as offshore, marine, or wind energy industry, the aging of composites is an important issue, as the structures are exposed to severe environmental conditions. Typically, moisture gradients evolve from the surfaces in contact with moisture or water into the material. The underlying diffusion process depends on the ambient temperature and the specific material selection (e.g. the chemical structure of the polymeric resins). In this context, fiber reinforced polymers...



Creep behaviour of composite cylinders at sea

Repositorio: DUGiDocs – Universitat de Girona

Oceans play a major role in regulating the Earth’s climate. More especially, they mitigate the impacts induced by global warming as they absorb and store most of the heat, however up to a certain point. A change in water temperatures is now witnessed and this needs to be carefully monitored and understood. Nonetheless, more than 70% of the oceans still remains unexplored and to overcome this, specific exploration devices are needed. At Ifremer, the use of pressure vessels for marine exploration...



Testing to evaluate water effects in composites: a critical regard

Repositorio: DUGiDocs – Universitat de Girona

Polymer matrix composites are already widely used in marine applications, but many of these are overdesigned (glass/polyester pleasure boat hulls for example) and rarely heavily loaded. These structures can last for 30 years or more and the main issue is how to dispose of them at the end of their useful life. However, composite materials are increasingly being proposed for more highly loaded structural components such as propellers and tidal turbine blades. For these structures, the effects of...



Biaxial plain and open-hole strength of thermoplastic composites

Repositorio: DUGiDocs – Universitat de Girona

Thermoplastic composites are gaining momentum in the aviation industry as they enable new manufacturing techniques that can greatly benefit cost-efficient high-volume production, while at the same time enhancing sustainability. There are however difficulties in exploiting the full potential of composites materials, in particular under multi-axial loading. The objective of this work is to test the plain- and open-hole strength of thermoplastic AS4D/PEKK-FC UD composite laminates under multi...



Quasi-static crushing behaviour of a high-strength carbon fibre-reinforced thermoplastic (CFRTP) in mechanically fastened joints

Repositorio: DUGiDocs – Universitat de Girona

Mechanically fastened joints are still a fast and effective way to lock parts together when assembling components or sub-components. This work presents the results of quasi-static bearing and filled- hole tensile and compressive testing of a novel aeronautical-grade high-strength CFRTP, and is one of the first studies to assess the quasi-static performance of mechanically fastened composite laminates manufactured from unidirectional (UD) tape CFRTP. The extent of delamination and intralaminar...



Mode-I fracture toughness of thin CF/PA6 UD composites identified in a DCB test with stiffening al beams in the presence of debonding

Repositorio: DUGiDocs – Universitat de Girona

Compression molding of unidirectional (UD) carbon fiber-reinforced polyamide6 (CF/PA6) prepreg tapes is conducted to manufacture thin 4-ply UD laminates. Two cooling rates of 43 °C/min and 760 °C/min are obtained using different press machines. Isothermal cooling through the thickness of the laminates is ensured by the small laminate thickness and validated by thermal cycle recording at different locations. Different cooling rates result in different degrees of crystallinity [1], and their...



Experimental building block approach and numerical modelling of thermoplastic composite used for fuselage panels

Repositorio: DUGiDocs – Universitat de Girona

The present work focuses on the experimental and numerical investigation of thermoplastic composite aircraft structures through a building block approach [1-3]. Numerical simulations take part as to derive a preliminary behavior of the thermoplastic composite material and extract the optimum geometry and stacking sequence and then validation comes from the experimental campaign. The tests are extended from material characterization coupons to the demonstrator multistiffener panel



Experimental testing and numerical simulation of bearing and filled hole tension carbon specimens under dynamic loading

Repositorio: DUGiDocs – Universitat de Girona

Holes or filled holes with a bolt in a composite lead to stress concentration that may cause complicated damage processes and failure mechanisms, such as matrix cracking, fibre breakage, delamination, etc., leading to catastrophic failure and a reduction of strength. Due to the complex damage mechanisms involved, as well as the complexity in analysing composite materials, predicting the strength reduction due to the presence of holes is quite challenging. Consequently, experimental tests are...



Obtaining the J-integral and mode mixity of climbing drum peel test by finite element modelling

Repositorio: DUGiDocs – Universitat de Girona

Fibre composites are used for their high specific stiffness and strength and possibility for tailoring the properties in the different directions depending on the loads in a given application. Wind turbine blades are almost entirely made of fibre composites and sandwich structures to keep the weight low at a reasonable cost. As a result, a wind turbine blade contains many interfaces both between the individual layers in the composite and sandwich structures, and as adhesive bond lines between...



Bayesian prediction of the load response of composite structures to streamline certification approaches

Repositorio: DUGiDocs – Universitat de Girona

The ‘pyramid of tests’ or ‘building block’ approach, consisting of analysis and experimental validation, is currently used to demonstrate the structural integrity of composite aerostructures. The premise is that experiemntally obtained allowable strength limits of small elements (mainly coupons) of a composite structure are combined with knock-down factors to predict performance at higher length scales. The approach is suboptimal, as composite material behaviour is scale-dependent. Therefore,...



Finite element simulation of the full stance-phase in the design process of a 3d-printed composite foot prosthesis

Repositorio: DUGiDocs – Universitat de Girona

Therefore, this work aims to establish a finite element simulation of the full stance-phase of the gait cycle through which the structural and biomechanical parameters of a prosthesis are assessed. The simulated stance-phase conditions were those of the rollover test of ISO 16955. A preliminary model of the set-up of this test was developed



Validation of a progressive failure model using technological specimens

Repositorio: DUGiDocs – Universitat de Girona

The design of composite structures is of main interest for the aerospace industry. The utmost difficulty relies on the complexity of the damage mechanisms taking place before failure and the influence of the mechanical loading history on the damage kinetics. In addition, the presence of geometrical singularities requires well-adapted criterion or non-local formulations to properly predict the strength of the structure. To overcome these difficulties, engineers in the industry have developed...



Progressive failure analysis of filled hole and bearing composite laminate bolted joints

Repositorio: DUGiDocs – Universitat de Girona

Bolted joints are extensively used in composite aircraft assemblies because of their efficiency in transferring loads and ease of maintenance. The aircraft industry calculates the reserve factor of bolted joints by comparing the internal loads from a linear finite element model against the material allowables calculated with an analytical approach. While this methodology has proven successful in the development of commercial aircrafts, the calibration of analytical models relies on large...



Implementation of 3d nonlinear material model in finite element code

Repositorio: DUGiDocs – Universitat de Girona

In certain applications, there is a growing need to use a nonlinear material model that could account for viscoplasticity, viscoelasticity and damage. Bio-based composites, composites used in demanding environments, and manufacturing process optimization are just a few examples of such fields. On top of that, composite structures are becoming more complex. Thus, using widely used simplistic 1D material models is not sufficient anymore for these applications. Even for relatively simple...



Assessment of cohesive law extrapolation procedure of adhesively bonded joints under different environmental conditions

Repositorio: DUGiDocs – Universitat de Girona

The present work evaluates the validity of the extrapolation method using the master curves determined under laboratory conditions to determine the properties of adhesive bonds under different environmental conditions



Fatigue cohesive zone modelling of a benchmark test for composites under complex loading sequences resulting in non-self-similar damage evolution

Repositorio: DUGiDocs – Universitat de Girona

In this work, the fatigue CZM developed in C. G. Dávila (2020, April. NASA/TP–2020-220584) and the simulation strategy proposed in I. Lecinana (Engineering Fracture Mechanics, 2023, vol.286, art. num.109273) are adopted to simulate a novel fracture benchmark test that is considered as equivalent of in-service loading since it considers the transient effects of alternating different loading modes, monotonic, and fatigue loading. The case study was performed on a AS4D/PEKK-FC thermoplastic...



Adhesively bonded joint shear test characterization using a modified arcan fixture

Repositorio: DUGiDocs – Universitat de Girona

Adhesively bonded joints are frequently used for many composite engineering applications in eg. the aerospace, energy, civil, automotive [1] and medical sectors. This is because bonded joints display several advantages relative to other joints including improved stiffness and strength, reduced mass, ability to form continuous surfaces and ability to join dissimilar materials. However, depending on the joint geometry, bonded joints may not be as strong as joints made using other techniques,...



Damage inception of composite under dynamic loadings

Repositorio: DUGiDocs – Universitat de Girona

In this work a original work is presented in which the damage inception of notched composite laminates is analysed using Ultra-high speed radiography in combination of Ultra high speed video cameras. The unique facility at the ID19 of the European Sincotron Facility (ESRF), Split Hopkinson Pressure Bar (SHPB) and the Uc3m facilities has been used to perform the experimental campaign



Influence of motor expertise in the mirror neuron system activation: non-dancers vs expert ballet dancers

Repositorio: DUGiDocs – Universitat de Girona

The mirror neuron system (MNS) involves a group of neurons in the brain that respond to the performance and observation of similar motor actions. Investigation of this system has furthered the understanding and representation of action comprehension and other fields of interest in cognitive neuroscience. In this study, the aim is to look at differences of response between both groups following the observation of expert ballet dancers’ performance and everyday movements, and also their ability..., El sistema de neuronas espejo (SNE) involucra un grupo de neuronas en el cerebro que responden al desempeño y observación de acciones motoras similares. La investigación de este sistema ha fomentado la comprensión y representación de la comprensión de la acción y otros campos de interés en la neurociencia cognitiva. En este estudio, el objetivo es determinar si existen diferencias de respuesta entre ambos grupos tras la observación de la acción de bailarines de ballet expertos y de movimientos..., 3



Design optimization of the step/scarf repair of an aeronautical panel targeting the maximum compressive strength and the minimization of material removal

Repositorio: DUGiDocs – Universitat de Girona

The design and evaluation of different elliptical composite repair patches, for the purpose of forming an optimum patch design, is a complex and time-consuming process. Geometry and effectiveness of a repair patch depend on various parameters, such as length of step, dimensions of major and minor semi-axes of each ply’s ellipse, as well as on each ply’s ellipse’s eccentricity. The optimum values of the previously mentioned parameters are strongly related to layup and loading conditions....



¿Es necesario trabajar la sexualidad de las personas drogodependientes? sexo, drogas y ... ¡empecemos!, Is it necessary to work on sexuality among people with substance use disorders? sex, drugs and ... let’s go!

Repositorio: DUGiDocs – Universitat de Girona

Introduction: Although the use of recreational drugs and pharmacological treatments have a strong impact on the sexuality of individuals with substance use disorders, sexuality is not usually included in the work plans of specialized residential services. Goals: The goals of this study were to analyze the users' sexual health in the context of residential care, as well as connecting the contents of the regulations regarding sexuality with the users' and professionals' sexual..., Introducción: Aunque el consumo de drogas recreativas y los tratamientos farmacológicos tienen un fuerte impacto en la sexualidad de los individuos que padecen trastornos por consumo de sustancias, la sexualidad no suele incluirse en los planes de trabajo de los servicios residenciales especializados. Objetivos: Los objetivos de este estudio fueron analizar la salud sexual de las personas usuarias en el contexto residencial de atención, así como relacionar los contenidos de las normativas de...



Age segregation and housing unaffordability: Generational divides in housing opportunities and spatial polarisation in England and Wales

Repositorio: DUGiDocs – Universitat de Girona

Age is an important known driver of residential sorting, yet little is understood about how age segregation is affected by housing unaffordability. This relationship is particularly pertinent given trends of increasing housing inequalities and population ageing, in Europe and elsewhere. Using harmonised population data for small areas linked with local house price statistics and household incomes in England and Wales, this paper examines the scale of, and links between, residential age...



Control of Therapeutic Levels of Anticoagulation and Associated Factors: A Prospective Cohort Study

Repositorio: DUGiDocs – Universitat de Girona

Maintaining therapeutic levels of anticoagulation is essential to avoid health complications in people who take vitamin K antagonists. This study aimed to analyze the influence of people’s characteristics and the presence of changes in their lives in the control of therapeutic levels of anticoagulation. A longitudinal multicenter study with a 1-year follow-up of a cohort of 199 people receiving anticoagulant therapy was performed. The effect of biological, clinical, social, lifestyle, and...



Migration Studies: How Should We Approach Them? Learning Through Participatory Practices. The So-Close Case Study

Repositorio: DUGiDocs – Universitat de Girona

Community members such as migrants are involved to collect data but not included in the actual research process, for example, in developing research guidelines or in using research tools such as data analysis. Participatory methodology enables investigating a specific issue while including the community involved. In the So-Close project, we applied this approach to investigate how we study migration and the role of the cultural heritage of forced migration through four multi-stakeholders..., This paper is supported by European Union’s Horizon 2020 research and innovation programme under grant agreement No 870939, project SOCLOSE, Enhancing Social Cohesion through Sharing the Cultural Heritage of Forced Migrations



The Overwhelming effects of textual enhancement in 5th grader's written performance

Repositorio: DUGiDocs – Universitat de Girona

L’objectiu d’aquest estudi és analitzar la manera com la manipulació física del text afecta l’expressió escrita de l’Anglès com a Llengua Estrangera. 51 alumnes de 5è de Primària de l’escola Sant Salvador d’Horta van realitzar dues comprensions lectores: amb un text bàsic i amb un text físicament modificat. Les tasques es van corregir numèricament i l’avaluació es va comparar estadísticament segons el grau de millora, la nota mitjana i el nivell de comprensió. Els resultats de la recerca..., 4



Study of the autonomy of the Upper Cycle students of two rural schools in the learning of the EFL (English as a Foreign Language): estudi de l'autonomia dels alumnes de Cicle Superior de dues escoles rurals en l'aprenentatge de l'EFL (Anglès com a Llengua Estrangera)

Repositorio: DUGiDocs – Universitat de Girona

El present article consta d’una recerca sobre l’autonomia en l’aprenentatge de l’Anglès com a Llengua Estrangera (EFL) dels alumnes de Cicle Superior de dues escoles rurals de la ZER El Llierca, de La Garrotxa, després d’haver observat un comportament poc independent durant les sessions d’aquesta assignatura. Els participants de l’estudi són els mateixos alumnes de l’últim cicle d’Educació Primària de les dues escoles, els quals han sigut observats durant la realització d’activitats grupals i..., 4



A Sustainable Future for Food Tourism: Promoting the Territory through Cooking Classes

Repositorio: DUGiDocs – Universitat de Girona

Food tourism is becoming more popular because of the growing interest of people in organic products and achieving healthier habits. This paper aims to analyze the potential of cooking classes for the planning and development of a sustainable future for food tourism. The research is based on six interviews with providers of cooking classes and six interviews with food tourists in the region of Catalonia. Results show that cooking classes contribute to the process of awarding tourism value to..., 12



Nanostructured Mn–Ni Powders Produced by High-Energy Ball-Milling for Water Decontamination from RB5 Dye

Repositorio: DUGiDocs – Universitat de Girona

n this study, the degradation efficiency of Mn-20at%Ni and Mn-30at%Ni particle powders made by melt-spinning and high-energy ball-milling techniques is investigated in relation to the degradation of the azo dye Reactive Black 5. SEM, EDS, and XRD were used to analyze the powders’ morphology, surface elemental composition, and phase structure. An ultraviolet-visible absorption spectrophotometer was used to measure the ball-milled powder’s capacity to degrade, and the collected powders were...



Synthesis, Structural and Magnetic Characterization of Superparamagnetic Ni0.3Zn0.7Cr2−xFexO4 Oxides Obtained by Sol-Gel Method

Repositorio: DUGiDocs – Universitat de Girona

The sol-gel process was used to produce ferrite Ni0.3Zn0.7Cr2−xFexO4 compounds with x = 0, 0.4, and 1.6, which were then subsequently calcined at several temperatures up to 1448 K for 48 h in an air atmosphere. X-ray diffraction (XRD), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM), and 57Fe Mössbauer spectrometry were used to examine the structure and magnetic characteristics of the produced nanoparticles. A single-phase pure Ni0.3Zn0.7Cr2−xFexO4 nanoparticle had...



Neighbors Matter: An Investigation into Intergroup Interactions Affecting the Social Networks of Adjacent Chimpanzee Groups

Repositorio: DUGiDocs – Universitat de Girona

Wild chimpanzees live in large and complex social communities, but their complexity is determined by the number of potential social partners as well as the frequent changes in group composition due to fission–fusion dynamics. Alternatively, captive housed chimpanzee groups are usually much smaller and less complex. However, studies have shown that groups can be housed in adjacent habitats, potentially increasing the number of social partners, i.e., granting additional relationship opportunities...



Geochemical Speciation, Ecological Risk and Assessment of Main Sources of Potentially Toxic Elements (PTEs) in Stream Sediments from Nile River in Egypt

Repositorio: DUGiDocs – Universitat de Girona

Studying and understanding the complexity and interactions of different factors influencing stream sediment quality is necessary for the development of successful water quality management strategies. This study aims to evaluate the level of contamination by potentially toxic elements (PTEs) (As, Co, Cr, Cu, Mn, Ni, Pb, V, Zn) of the stream sediments of the Nile River. During the spring of 2019, river sediments were sampled at 23 sites along the Nile River. For each sample, one aliquot was..., J.P.-A. was partly supported by the Spanish Ministry of Science and Innovation (MCIN/AEI/10:13039/501100011033) and ERDF A way of making Europe [grant number PID2021-123833OB-I00] and the Department of Research and Universities of the Generalitat de Catalunya [grant number 2021SGR01197]



Comparative Study on the Stiffness of Poly(lactic acid) Reinforced with Untreated and Bleached Hemp Fibers

Repositorio: DUGiDocs – Universitat de Girona

Composite materials containing natural reinforcement fibers, generally called biocomposites, have attracted the interest of both researchers and manufacturers, but the most environmentally advantageous combinations include a bio-based matrix, as well. With this in mind, a poly(lactic acid) (PLA) matrix was reinforced with natural fibers from hemp, both untreated strands (UHSs) and soda-bleached fibers (SBHFs). The preparation of the subsequent fully bio-sourced, discontinuously reinforced...



Gender Roles in Formal Second Language Learning in a Migratory Context: L2 Teachers’ Perceptions of Moroccan Origin Women in Catalonia

Repositorio: DUGiDocs – Universitat de Girona

In Catalonia, the largest group of immigrants is that of Moroccan origin. Some Moroccan women are conditioned by a traditional family model that is concretised by the spatial separation between men and women in all spheres of society, a fact that influences the socialisation of these women and that, in a migratory context, may have an impact on their early abandonment of formal second language courses. Accordingly, this study aims to analyse the importance of accounting for the culture and..., This research was funded by Ministerio de Ciencia e Innovación, grant number PID2021-123617NB-C42



Spatial Patterns in the Morphological Diversity of Madagascan Frogs

Repositorio: DUGiDocs – Universitat de Girona

Madagascar is a biodiversity hotspot, containing a large proportion of endemic species. To make conservation efforts more effective, it is necessary to understand the spatial distribution of this huge biodiversity. In this study, the patterns of morphological variation and diversity in the adult anurans of Madagascar were evaluated and compared across different climatic regions. These patterns were investigated for 370 species (2360 specimens), and the variation in 13 morphological traits...



Effects of Leaf Wetness Duration, Temperature, and Host Phenological Stage on Infection of Walnut by Xanthomonas arboricola pv. juglandis

Repositorio: DUGiDocs – Universitat de Girona

Bacterial blight, caused by Xanthomonas arboricola pv. juglandis, is a significant disease affecting walnut production worldwide. Outbreaks are most severe in spring, and closely tied to host phenology and weather conditions. Pathogen infections are mainly observed in catkins, female flowers, leaves, and fruits. In this study, the effect of wetness duration and temperature on walnut infections by X. arboricola pv. juglandis was determined through two independent experiments conducted under..., This research was partially funded by INIA cofounded by FEDER funds; grant number RTA2005-00104-00-00



Assessing the Student Nurses’ Knowledge of Oral Health Care

Repositorio: DUGiDocs – Universitat de Girona

Oral health is crucial for the overall well-being and quality of life, and nurses play a significant role in promoting it. This study assessed the oral health knowledge of fourth-grade nursing degree students. Seventy-two students completed a questionnaire covering sociodemographic variables, oral health-related factors, knowledge about oral health, and perceptions of its importance and learning experiences. The results showed that 83.3% of students attended regular dental check-ups for...



Stabilization of Beeswax-In-Water Dispersions Using Anionic Cellulose Nanofibers and Their Application in Paper Coating

Repositorio: DUGiDocs – Universitat de Girona

Beeswax is a bio-sourced, renewable, and even edible material that stands as a convincing option to provide paper-based food packaging with moisture resistance. Nonetheless, the difficulty of dispersing it in water limits its applicability. This work uses oxidized, negatively charged cellulose nanofibers along with glycerol to stabilize beeswax-in-water emulsions above the melting point of the wax. The synergistic effects of nanocellulose and glycerol granted the stability of the dispersion..., This research was funded by the Spanish Ministry of Science and Innovation, project NextPack (PID2021-124766OA-I00), and the Department of Research and Universities from the Government of Catalonia, Industrial Doctorates (2021 DI 013), 9



Luminescent Papers with Asymmetric Complexes of Eu(III) and Tb(III) in Polymeric Matrices and Suggested Combinations for Color Tuning

Repositorio: DUGiDocs – Universitat de Girona

Complexes of lanthanide ions, such as Eu(III) (red light emission) and Tb(III) (green light emission), with proper ligands can be highly luminescent and color-tunable, also attaining yellow and orange emission under UV radiation. The ligands employed in this work were poly(sodium acrylate), working as polymeric matrix, and 1,10-phenanthroline, taking advantage of its antenna effect. Possibilities of color display were further enhanced by incorporating a cationic polyfluorene with blue emission...., This work was carried out under the Project inpactus—innovative products and technologies from eucalyptus, Project No. 21874, funded by Portugal 2020 through European Regional Development Fund (ERDF) in the frame of COMPETE 2020 No. 246/AXIS II/2017. Financial support from the Coimbra Chemistry Centre (CQC), which is supported by the Fundação para a Ciência e a Tecnologia (FCT) through the programs UID/QUI/00313/2020 and COMPETE, is gratefully acknowledged



Flocculation of Cellulose Microfiber and Nanofiber Induced by Chitosan–Xylan Complexes

Repositorio: DUGiDocs – Universitat de Girona

This study aims to provide a comprehensive understanding of the key factors influencing the rheological behavior and the mechanisms of natural polyelectrolyte complexes (PECs) as flocculation agents for cellulose microfibers (CMFs) and nanofibers (CNFs). PECs were formed by combining two polyelectrolytes: xylan (Xyl) and chitosan (Ch), at different Xyl/Ch mass ratios: 60/40, 70/30, and 80/20. First, Xyl, Ch, and PEC solutions were characterized by measuring viscosity, critical concentration (c*..., This work was supported by: (a) Agencia I+D+I (PICT 2018 Nº 4410, PICT 2019 Nº 03246 and PICT 2020 Nº 02920); (b) CAI+D 2020 PI, Tipo II-Nº 50620190100135LI; (c) CONICET; (d) Spanish Ministry of Science and Innovation to the projects CON-FUTURO-ES (PID2020-113850RB-C22) and VALORCON-NC (PDC2021-120964-C22)



Resonance-Assisted Hydrogen Bonding controlling excited state Proton Transfer

Repositorio: DUGiDocs – Universitat de Girona

Resonance-Assisted Hydrogen Bonds (RAHB) are systems in which a hydrogen bond and a heteroconjugated system (a proton-donor group and a proton-acceptor group) form a cyclic structure known as a quasi-ring. These systems exhibit a significantly stronger bond compared to conventional hydrogen bonds due to resonance effects facilitated by π-electrons. This study investigates RAHB systems with different proton-donor (PD) and proton-acceptor (PA) groups based on oxygen and nitrogen elements. The PD..., 9



Active Labeling Correction of Mealtimes and the Appearance of Types of Carbohydrates in Type 1 Diabetes Information Records

Repositorio: DUGiDocs – Universitat de Girona

People with type 1 diabetes are required to adhere to their treatment rigorously to ensure maximum benefits. Diabetes tracking tools have played an important role in this regard. Type 1 diabetes monitoring has evolved and matured with the advent of blood glucose monitor sensors, insulin pens, and insulin pump automation. However, carbohydrate monitoring has seen little progress despite carbohydrates representing a major potential disruption. Relying on the modeling of carbohydrate intake using..., This work was partially supported by grants PID2019-107722RB-C22, PID2020-117171RA-I00, and PID2019-105221RB-C44, which were funded by MCIN/AEI/ 10.13039/50110001103, by the European Union through Next GenerationEU, and by the Government of Catalonia under 2021SGR01598 and the Spanish Ministry of Universities