BUSCADOR RECOLECTA

Digital.CSIC. Repositorio Institucional del CSIC

oai:digital.csic.es:10261/307309

The experimental data used are classified in zip folders according to the results of the analyses carried out for the paper: thickness measurements, visual appearance, microscope photos, EIS data, Raman and climatic conditions used during the coating application and drying process. These folders are subdivided into others depending on the coating and/or ageing time carried out. It is recommended to read the paper beforehand in order to have a better understanding and location of the data. All files are in open extensions and are protected by a Creative Commons Attribution 4.0 International (CC BY 4.0) licence., [EN] This is the experimental dataset used in the paper: Testing protective coatings for metal conservation: the influence of the application method. This data presents results on the effect that methodology application variables can have on the protective capacity of the coatings. The influence of the thickness, number of layers and drying time of Paraloid B72, C80 microcrystalline wax and Incralac on bare steel coupons on the performance of the coatings has been evaluated with techniques such as: electrochemical impedance spectroscopy (EIS), a reflected light metallurgical microscope and electromagnetic induction thickness probe. It has been shown that the number of layers is not always proportional to the thickness of the coating and that after accelerated ageing, some coatings that had been left to dry for 14 days, have a better protective capacity than those that were left to dry for less time., [ES] Este es el conjunto de datos experimentales utilizado en el artículo: Pruebas de recubrimientos protectores para la conservación de metales: la influencia del método de aplicación. Estos datos presentan resultados sobre el efecto que las variables de aplicación de la metodología pueden tener en la capacidad protectora de los recubrimientos. Se ha evaluado la influencia del espesor, número de capas y tiempo de secado de Paraloid B72, cera microcristalina C80 e Incralac sobre cupones de acero desnudo en el comportamiento de los recubrimientos mediante técnicas como: espectroscopia de impedancia electroquímica (EIS), microscopio metalúrgico de luz reflejada y sonda de espesores por inducción electromagnética. Se ha demostrado que el número de capas no siempre es proporcional al espesor del recubrimiento y que, tras un envejecimiento acelerado, algunos recubrimientos que se habían dejado secar durante 14 días, tienen una mejor capacidad protectora que los que se dejaron secar durante menos tiempo., This work has been funded by MCIN/AEI /10.13039/501100011033 and “ERDF A way of making Europe”, under the project COMPACT (HAR2017-89911-R) and the predoctoral grant PRE2018-086667 additionally funded by “ESF Investing in your future”. It is also been funded by the Community of Madrid and the European Social Fund, under the TOP Heritage-CM programme (P2018/NMT-4372)., Peer reviewed