Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of a repertoire of tomato fruit genetic variants in the San Marzano genetic background

  • Dono, Gabriella
  • Picarella, Maurizio Enea
  • Santangelo, Enrico
  • Mazzucato, Andrea
  • Pons Puig, Clara|||0000-0002-8296-2937
  • Monforte Gilabert, Antonio José|||0000-0003-3461-3094
  • GRANELL RICHART, ANTONIO|||0000-0003-4266-9581
[EN] San Marzano (SM) is a worldwide famous tomato Italian traditional landrace characterized by elongated fruits with a dual-purpose use in the fresh and processing market. A repertoire of mutations affecting the fruit and of interest for commercial breeding were introduced into the SM genetic background following backcross schemes. The lines generated included 13 genotypes each carrying a single mutation in genes controlling a) the content of all pigments (hp-1, hp-2, pd), b) of carotenoids (r, t, at, B, B_mo(B)), c) of chlorophyll (gf), d) of flavonoids (y) or e) the ripening process (Nr, rin, Gr). Five lines carrying a combination of two mutations were also included. Analysis of SNP polymorphisms showed that the genetic distance of the lines from the recurrent parent was very variable and not well predicted by the number of backcrosses because it was also a function of the dissimilarity of the donor parent. All the genotypes, together with an SM control, were grown in two consecutive years and characterized for vegetative, reproductive and fruit quality traits. Overall, the studied lines reproduced the SM typical phenotypes, but several differences also emerged as both possible negative or advantageous pleiotropic traits for fresh or processing uses and peeling. High pigment mutations confirmed the negative pleiotropic effects on plant fertility and fruit development described earlier and also negatively affected fruit post-harvest life. These latter defects were also reported in the carotenoid mutant tangerine. In contrast, absence of peel pigmentation in the y mutant was associated with positive postharvest properties as those fruit presented higher resistance to wrinkling and dehydration. Delayed ripening mutants showed positive post-harvest phenotypes, as expected. In conclusion, the study of the present repertoire of fruit variations in an elongated tomato genotype represents a contribution to expand the study of fruit physiology to unusual fruit types and to breed innovative tomato lines with valuable nutritional and technological properties., This work was supported by the Latium Region FILAS project "MIGLIORA", by the Italian Ministry of Agriculture (MiPAAF) under the AGROENER project (D.D. n. 26329, 1 april 2016) - http://agroener.crea.gov.it/and by the European Commission through-H2020 SFS-7a-2014 TRADITOM (634561).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Al2O3/TiO2 inverse opals from electrosprayed self-assembled templates

  • Coll, Arnau
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
  • Hernández, David
  • Castañer Muñoz, Luis María|||0000-0002-1988-6468
The fabrication of high optical quality inverse opals is challenging, requiring large size, three-dimensional ordered layers of high dielectric constant ratio. In this article, alumina/TiO2–air inverse opals with a 98.2% reflectivity peak at 798 nm having an area of 2 cm2 and a thickness of 17 µm are achieved using a sacrificial self-assembled structure of large thickness, which was produced with minimum fabrication errors by means of an electrospray technique. Using alumina as the first supporting layer enables the deposition of TiO2 at a higher temperature, therefore providing better optical quality., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

TCO-free low-temperature p+ emitters for back-junction c-Si solar cells

  • Martín García, Isidro|||0000-0001-8833-9057
  • Coll Valentí, Arnau|||0000-0001-6380-7475
  • López Rodríguez, Gema|||0000-0003-4806-5180
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Desrues, Thibaut
  • Orpella García, Alberto|||0000-0003-2726-5861
  • Alcubilla González, Ramón|||0000-0003-4827-4513
In this work, we report on the fabrication and characterization of n-type c-Si solar cells whose p+ emitters are based on laser processed aluminum oxide/silicon carbide (Al2O3/SiCx) films. The p+ emitter is defined at the rear side of the cell and it consists of point-like laser-diffused p+ regions with a surface charge induced emitter in between based on the high negative charge located at the Al2O3/c-Si interface. These emitters are fabricated at low temperature (< 400 °C) and could be directly compared to silicon heterojunction emitters with the advantage that the deposition of a Transparent Conductive Oxide (TCO) film can be avoided, since they are based on p+/n c-Si homojunctions. Additionally, the involved films are transparent to the IR photons ( >1000 nm) that reach the rear surface of the cell resulting in an excellent back reflector. We fabricated solar cells with distance between p+ regions or pitch ranging from 200 to 350 µm with a front surface based on silicon heterojunction technology. Best efficiency (18.1%) is obtained for a pitch of 250 µm as a consequence of the trade-off between Voc and FF values., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

TCO-free low-temperature p+ emitters for back-junction c-Si solar cells

  • Martín García, Isidro
  • Coll Valentí, Arnau
  • López Rodríguez, Gema
  • Ortega Villasclaras, Pablo Rafael
  • Desrues, Thibaut
  • Orpella García, Alberto
  • Alcubilla González, Ramón
In this work, we report on the fabrication and characterization of n-type c-Si solar cells whose p+ emitters are based on laser processed aluminum oxide/silicon carbide (Al2O3/SiCx) films. The p+ emitter is defined at the rear side of the cell and it consists of point-like laser-diffused p+ regions with a surface charge induced emitter in between based on the high negative charge located at the Al2O3/c-Si interface. These emitters are fabricated at low temperature (< 400 °C) and could be directly compared to silicon heterojunction emitters with the advantage that the deposition of a Transparent Conductive Oxide (TCO) film can be avoided, since they are based on p+/n c-Si homojunctions. Additionally, the involved films are transparent to the IR photons ( >1000 nm) that reach the rear surface of the cell resulting in an excellent back reflector. We fabricated solar cells with distance between p+ regions or pitch ranging from 200 to 350 µm with a front surface based on silicon heterojunction technology. Best efficiency (18.1%) is obtained for a pitch of 250 µm as a consequence of the trade-off between Voc and FF values., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Al2O3/TiO2 inverse opals from electrosprayed self-assembled templates

  • Coll, Arnau
  • Bermejo Broto, Sandra
  • Hernández, David
  • Castañer Muñoz, Luis María
The fabrication of high optical quality inverse opals is challenging, requiring large size, three-dimensional ordered layers of high dielectric constant ratio. In this article, alumina/TiO2–air inverse opals with a 98.2% reflectivity peak at 798 nm having an area of 2 cm2 and a thickness of 17 µm are achieved using a sacrificial self-assembled structure of large thickness, which was produced with minimum fabrication errors by means of an electrospray technique. Using alumina as the first supporting layer enables the deposition of TiO2 at a higher temperature, therefore providing better optical quality., Peer Reviewed, Postprint (published version)