Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Microscale spatially resolved characterization of highly doped regions in laser-fired contacts for high-efficiency crystalline Si solar cells

  • Roige, A
  • Alvarez, J
  • Kleider, J.P.
  • Martín García, Isidro|||0000-0001-8833-9057
  • Alcubilla González, Ramón|||0000-0003-4827-4513
  • Vega, L. F
Laser-fired contact (LFC) processes have emerged as a promising approach to create rear local electric contacts in p-type crystalline silicon solar cells. Although this approach has been successfully applied in devices showing efficiencies above 20%, there is still a lack of knowledge about some specific features of LFCs at the submicron level. In this study, we used micro-Raman and microphotoluminescence (PL) spectroscopies to carry out a high-resolution spatially resolved characterization of LFCs processed in Al2O3-passivated c-Si wafers. Relevant information concerning features such as local doping distribution and crystalline fraction of the laser-processed region has been obtained. In particular, interesting qualitative and quantitative variations concerning the doping profile have been observed between LFCs processed at different laser powers. Finally, conductive-atomic force microscopy measurements have allowed to identify the existence of highly conductive zones inside the LFCs greatly correlated with highly doped regions revealed by Raman and PL data. This study gives a detailed insight about the LFCs characteristics at the submicron level and their possible influence on the performance of final devices., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

TCO-free low-temperature p+ emitters for back-junction c-Si solar cells

  • Martín García, Isidro|||0000-0001-8833-9057
  • Coll Valentí, Arnau|||0000-0001-6380-7475
  • López Rodríguez, Gema|||0000-0003-4806-5180
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Desrues, Thibaut
  • Orpella García, Alberto|||0000-0003-2726-5861
  • Alcubilla González, Ramón|||0000-0003-4827-4513
In this work, we report on the fabrication and characterization of n-type c-Si solar cells whose p+ emitters are based on laser processed aluminum oxide/silicon carbide (Al2O3/SiCx) films. The p+ emitter is defined at the rear side of the cell and it consists of point-like laser-diffused p+ regions with a surface charge induced emitter in between based on the high negative charge located at the Al2O3/c-Si interface. These emitters are fabricated at low temperature (< 400 °C) and could be directly compared to silicon heterojunction emitters with the advantage that the deposition of a Transparent Conductive Oxide (TCO) film can be avoided, since they are based on p+/n c-Si homojunctions. Additionally, the involved films are transparent to the IR photons ( >1000 nm) that reach the rear surface of the cell resulting in an excellent back reflector. We fabricated solar cells with distance between p+ regions or pitch ranging from 200 to 350 µm with a front surface based on silicon heterojunction technology. Best efficiency (18.1%) is obtained for a pitch of 250 µm as a consequence of the trade-off between Voc and FF values., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Microscale spatially resolved characterization of highly doped regions in laser-fired contacts for high-efficiency crystalline Si solar cells

  • Roige, A
  • Alvarez, J
  • Kleider, J.P.
  • Martín García, Isidro
  • Alcubilla González, Ramón
  • Vega, L. F
Laser-fired contact (LFC) processes have emerged as a promising approach to create rear local electric contacts in p-type crystalline silicon solar cells. Although this approach has been successfully applied in devices showing efficiencies above 20%, there is still a lack of knowledge about some specific features of LFCs at the submicron level. In this study, we used micro-Raman and microphotoluminescence (PL) spectroscopies to carry out a high-resolution spatially resolved characterization of LFCs processed in Al2O3-passivated c-Si wafers. Relevant information concerning features such as local doping distribution and crystalline fraction of the laser-processed region has been obtained. In particular, interesting qualitative and quantitative variations concerning the doping profile have been observed between LFCs processed at different laser powers. Finally, conductive-atomic force microscopy measurements have allowed to identify the existence of highly conductive zones inside the LFCs greatly correlated with highly doped regions revealed by Raman and PL data. This study gives a detailed insight about the LFCs characteristics at the submicron level and their possible influence on the performance of final devices., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

TCO-free low-temperature p+ emitters for back-junction c-Si solar cells

  • Martín García, Isidro
  • Coll Valentí, Arnau
  • López Rodríguez, Gema
  • Ortega Villasclaras, Pablo Rafael
  • Desrues, Thibaut
  • Orpella García, Alberto
  • Alcubilla González, Ramón
In this work, we report on the fabrication and characterization of n-type c-Si solar cells whose p+ emitters are based on laser processed aluminum oxide/silicon carbide (Al2O3/SiCx) films. The p+ emitter is defined at the rear side of the cell and it consists of point-like laser-diffused p+ regions with a surface charge induced emitter in between based on the high negative charge located at the Al2O3/c-Si interface. These emitters are fabricated at low temperature (< 400 °C) and could be directly compared to silicon heterojunction emitters with the advantage that the deposition of a Transparent Conductive Oxide (TCO) film can be avoided, since they are based on p+/n c-Si homojunctions. Additionally, the involved films are transparent to the IR photons ( >1000 nm) that reach the rear surface of the cell resulting in an excellent back reflector. We fabricated solar cells with distance between p+ regions or pitch ranging from 200 to 350 µm with a front surface based on silicon heterojunction technology. Best efficiency (18.1%) is obtained for a pitch of 250 µm as a consequence of the trade-off between Voc and FF values., Peer Reviewed, Postprint (published version)
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Inorganic Photovoltaics - Planar and Nanostructured Devices

  • Ramanujam, J.
  • Verma, A.
  • González-Díaz, B.
  • Guerrero-Lemus, R.
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854
  • García-Tabarés Valdivieso, Elisa|||0000-0002-4080-376X
  • Rey-Stolle Prado, Ignacio|||0000-0002-4919-5609
  • Granek, F.
  • Korte, L.
  • Tucci, M.
  • Rath, J.
  • Singh, U.P.
  • Todorov, T.
  • Gunawan, O.
  • Rubioara, S.S.
  • Plaza, J.L.
  • Dieguez, E.
  • Hoffmann, B.
  • Christiansen, S.
  • Cirlin, G.E.