Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unconventional single-molecule conductance behavior for a new heterocyclic anchoring group: Pyrazolyl

  • Herrer, I. Lucía
  • Ismael, Ali K.
  • Milan, David C.
  • Vezzoli, Andrea
  • Martín, Santiago
  • González-Orive, Alejandro
  • Grace, Iain
  • Lambert, Colin J.
  • Serrano, José Luis
  • Nichols, Richard J.
  • Cea, Pilar
Electrical conductance across a molecular junction is strongly determined by the anchoring group of the molecule. Here we highlight the unusual behavior of 1,4-bis(1H-pyrazol-4-ylethynyl)benzene that exhibits unconventional junction current versus junction-stretching distance curves, which are peak-shaped and feature two conducting states of 2.3 × 10-4 G0 and 3.4 × 10-4 G0. A combination of theory and experiments is used to understand the conductance of single-molecule junctions featuring this new anchoring group, i.e., pyrazolyl. These results demonstrate that the pyrazolyl moiety changes its protonation state and contact binding during junction evolution and that it also binds in either end-on or facial geometries with gold contacts. The pyrazolyl moiety holds general interest as a contacting group, because this linkage leads to a strong double anchoring of the molecule to the gold electrode, resulting in enhanced conductance values., P.C. and J.L.S. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain and fondos FEDER in the framework of projects MAT2016-78257-R and CTQ2015-70174-P, respectively. J.L.S. also acknowledges the funded project Hierarchical Self Assembly of Polymeric Soft Systems, “SASSYPOL”, from the seventh Framework Programme (CEE, ref-607602). L.I.H., S.M., J.L.S, and P.C. acknowledge support from DGA/Fondos FEDER (construyendo Europa desde Aragón) for funding PLATON (E31_17R) and CLIP (E47_17R) research groups. This work was additionally supported by the EPSRC “QuEEN” programme Grant EP/N017188/1. Further support from the UK EPSRC is acknowledged, through Grant Nos. EP/M014452/1, EP/P027156/1, and EP/N03337X/1. Support from the European Commission is provided by the FET Open project 767187 – QuIET and the Iraqi Ministry of Higher Education (SL-20). A.K.I. acknowledges financial support from Tikrit University (Iraq). D.C.M., A.V. and R.J.N. gratefully acknowledge funding by EPSRC through grants EP/M005046/1, EP/M014169/1, and EP/M029522/1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrically transmissive alkyne-anchored monolayers on gold

  • Herrer, I. Lucía
  • González-Orive, Alejandro
  • Marqués-González, Santiago
  • Martín, Santiago
  • Nichols, Richard J.
  • Serrano, José Luis
  • Low, Paul J.
  • Cea, Pilar
Well-ordered, tightly-packed (surface coverage 0.97 × 10−9 mol cm−2) monolayer films of 1,4-bis((4-ethynylphenyl)ethynyl)benzene (1) on gold are prepared via a simple self-assembly process, taking advantage of the ready formation of alkynyl C–Au σ-bonds. Electrochemical measurements using [Ru(NH3)6]3+, [Fe(CN)6]3−, and ferrocenylmethanol [Fe(η5-C5H4CH2OH)(η5-C5H5)] redox probes indicate that the alkynyl C–Au contacted monolayer of 1 presents a relatively low barrier for electron transfer. This contrasts with monolayer films on gold of other oligo(phenylene ethynylene) derivatives of comparable length and surface coverage, but with different contacting groups. Additionally, a low voltage transition (Vtrans = 0.51 V) from direct tunneling (rectangular barrier) to field emission (triangular barrier) is observed. This low transition voltage points to a low tunneling barrier, which is consistent with the facile electron transport observed through the C–Au contacted self-assembled monolayer of 1., P. C. and J. L. S. are grateful for financial assistance from Ministerio de Economia y Competitividad from Spain and fondos FEDER in the framework of projects MAT2016-78257-R and CTQ2015-70174-P, respectively. J. L. S. also acknowledges the funded project Hierarchical Self Assembly of Polymeric Soft Systems, “SASSYPOL”, from the 7th Framework Programme (CEE, Ref-607602). L. H., S. M., J. L. S, and P. C. acknowledge support from DGA/Fondos FEDER (construyendo Europa desde Aragón) for funding PLATON (E31_17R) and CLIP (E47_17R) research groups. R. J. N. thanks EPSRC for funding (EP/M029522/1, EP/K007785/1, EP/M014169/1 and EP/M005046/1), and P. J. L. also gratefully acknowledges support from the Australian Research Council (FT120100073; DP140100855)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single molecule vs. large area design of molecular electronic devices incorporating an efficient 2-aminepyridine double anchoring group

  • Herrer, I. Lucía
  • Ismael, Ali K.
  • Martín, Santiago
  • Milan, David C.
  • Serrano, José Luis
  • Nichols, Richard J.
  • Lambert, Colin J.
  • Cea, Pilar
When a molecule is bound to external electrodes by terminal anchor groups, the latter are of paramount importance in determining the electrical conductance of the resulting molecular junction. Here we explore the electrical properties of a molecule with bidentate anchor groups, namely 4,4′-(1,4-phenylenebis(ethyne-2,1-diyl))bis(pyridin-2-amine), in both large area devices and at the single molecule level. We find an electrical conductance of 0.6 × 10−4G0 and 1.2 × 10−4G0 for the monolayer and for the single molecule, respectively. These values are approximately one order of magnitude higher than those reported for monodentate materials having the same molecular skeleton. A combination of theory and experiments is employed to understand the conductance of monolayer and single molecule electrical junctions featuring this new multidentate anchor group. Our results demonstrate that the molecule has a tilt angle of 30° with respect to the normal to the surface in the monolayer, while the break-off length in the single molecule junction occurs for molecules having a tilt angle estimated as 40°, which would account for the difference in their conductance values per molecule. The bidentate 2-aminepyridine anchor is of general interest as a contact group, since this terminal functionalized aromatic ring favours binding of the adsorbate to the metal contact resulting in enhanced conductance values., P. C. and J. L. S. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain and fondos FEDER in the framework of projects MAT2016-78257-R, CTQ2015-70174-P and PGC2018-097583-B-I00. J. L. S. also acknowledges the funded project Hierarchical Self Assembly of Polymeric Soft Systems, “SASSYPOL”, from the 7th Framework Programme (CEE, Ref-607602). L. H., S. M., J. L. S, and P. C. acknowledge support from DGA/Fondos FEDER (construyendo Europa desde Aragón) for funding PLATON (E31_17R) and CLIP (E47_17R) research groups. R. J. N. thanks EPSRC for funding (EP/M029522/1, EP/M005046/1 and EP/K007785/1). A. K. I. and C. J. L. acknowledge financial support from the UK EPSRC, through grant no. EP/M014452/1, EP/P027156/1 and EP/N03337X/1. This work was additionally supported by the European Commission is provided by the FET Open project 767187 – QuIET and the EU project Bac-to-Fuel. A. K. I. is grateful for financial assistance from Tikrit University (Iraq), and the Iraqi Ministry of Higher Education (SL-20)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Uncapped gold nanoparticles for the metallization of organic monolayers

  • Martín-Barreiro, Alba
  • Soto, Rogelio
  • Chiodini, Stefano
  • García-Serrano, Aitor
  • Martín, Santiago
  • Herrer, Lucía
  • Perez Murano, Francesc X.
  • Low, Paul J.
  • Serrano, José Luis
  • Marcos, Susana de
  • Galbán, Javier
  • Cea, Pilar
Deposition of the top-contact electrode to create large-area electrode | monolayer | electrode junctions represents a contemporary challenge to the integration of molecular electronic phenomena into device structures. Here, a top contact electrode is formed on top of an organic monolayer over a large area (cm2) by two simple, sequential self-assembly steps. Initial self-assembly of 4,4′-(1,4-phenylenebis(ethyne-2,1-diyl))dianiline onto gold-on-glass substrates gives high-quality monolayers. The exposed amine functionality is subsequently used to anchor uncapped gold nanoparticles deposited in a second self-assembly step. These uncapped gold nanoparticles are prepared by thermolysis of lipoic acid stabilized gold nanoclusters and contain gold oxide (≈9%) that provides stability in the absence of an organic capping ligand. This two-step procedure results in full coverage of the monolayer by the densely packed gold nanoparticles, which spontaneously condense to give a semi-continuous film. The electrical properties of these junctions are determined from I–V curves, revealing uniform electrical response and absence of metallic short-circuits or evidence of damage to the underlying molecular monolayer. These promising electrical characteristics suggest that the deposition of uncapped gold nanoparticles on suitably functionalized molecular monolayers provides a path for the fabrication of molecular electronic devices using simple methodologies., P.C., J.L.S., S. Martín, and J.G. are grateful for financial assistance from Ministerio de Ciencia e Innovación from Spain and fondos FEDER in the framework of projects PID2019-105881RB-I00, PID2019-105408GB-I00, and PGC2018-097583-B-I00. J.L.S. also acknowledges the funded project Hierarchical Self Assembly of Polymeric Soft Systems, “SASSYPOL,” from the 7th Framework Programme (CEE, Ref-607602). L.H., S. Martín, J.L.S, P.C., S. de Marcos, and J.G. acknowledge support from DGA/Fondos FEDER (construyendo Europa desde Aragón) for funding PLATON (E31_20R), CLIP (E47_17R) and N&SB (E25_17R) research groups. P.J.L. gratefully acknowledges support from the Australian Research Council (DP190100073; DP190100074). R.S. is grateful for the support provided by PASPA of the DGAPA and Engineering Faculty of National Autonomous University of Mexico., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unconventional Single-Molecule Conductance Behavior for a New Heterocyclic Anchoring Group: Pyrazolyl

  • Herrer, I.L.
  • Ismael, A.K.
  • Milán, D.C.
  • Vezzoli, A.
  • Martín, S.
  • González-Orive, A.
  • Grace, I.
  • Lambert, C.
  • Serrano, J.L.
  • Nichols, R.J.
  • Cea, P.
Electrical conductance across a molecular junction is strongly determined by the anchoring group of the molecule. Here we highlight the unusual behaviour of 1,4-bis(1H-pyrazol-4- ylethynyl)benzene that exhibits unconventional junction current vs. junction stretching distance curves, which are peak-shaped and feature two conducting states of 2.3·10-4 G0 and 3.4·10-4 G0. A combination of theory and experiments is used to understand the conductance of single molecule junctions featuring this new anchoring group, i.e. pyrazolyl. These results demonstrate that the pyrazolyl moiety changes its protonation state and contact binding during junction evolution and it also binds in either end-on or facial geometries with gold contacts. Pyrazolyl moiety holds general interest as a contacting group, since this linkage leads to a strong double anchoring of the molecule to the gold electrode resulting in enhanced conductance values.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Uncapped gold nanoparticles for the metallization of organic monolayers

  • Martín-Barreiro, Alba
  • Soto, Rogelio
  • Chiodini, Stefano
  • García-Serrano, Aitor
  • Martín, Santiago
  • Herrer, Lucia
  • Pérez-Murano, Francesc
  • Low, Paul J.
  • Serrano, José Luis
  • de Marcos, Susana
  • Galban, Javier
  • Cea, Pilar
Deposition of the top-contact electrode to create large-area electrode | monolayer | electrode junctions represents a contemporary challenge to the integration of molecular electronic phenomena into device structures. Here, a top contact electrode is formed on top of an organic monolayer over a large area (cm2) by two simple, sequential self-assembly steps. Initial self-assembly of 4,4′-(1,4-phenylenebis(ethyne-2,1-diyl))dianiline onto gold-on-glass substrates gives high-quality monolayers. The exposed amine functionality is subsequently used to anchor uncapped gold nanoparticles deposited in a second self-assembly step. These uncapped gold nanoparticles are prepared by thermolysis of lipoic acid stabilized gold nanoclusters and contain gold oxide (≈9%) that provides stability in the absence of an organic capping ligand. This two-step procedure results in full coverage of the monolayer by the densely packed gold nanoparticles, which spontaneously condense to give a semi-continuous film. The electrical properties of these junctions are determined from I–V curves, revealing uniform electrical response and absence of metallic short-circuits or evidence of damage to the underlying molecular monolayer. These promising electrical characteristics suggest that the deposition of uncapped gold nanoparticles on suitably functionalized molecular monolayers provides a path for the fabrication of molecular electronic devices using simple methodologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electrically transmissive alkyne-anchored monolayers on gold

  • Herrer, L
  • Gonzalez-Orive, A
  • Marques-Gonzalez, S
  • Martin, S
  • Nichols, R.J
  • Serrano, J.L
  • Low, P.J
  • Cea, P.
Well-ordered, tightly-packed (surface coverage 0.97 x 10(-9) mol cm(-2)) monolayer films of 1, 4-bis((4-ethynylphenyl)ethynyl)benzene (1) on gold are prepared via a simple self-assembly process, taking advantage of the ready formation of alkynyl C-Au sigma-bonds. Electrochemical measurements using [Ru(NH3)(6)](3+), [Fe(CN)(6)](3-), and ferrocenylmethanol [Fe((5)-C5H4CH2OH)((5)-C5H5)] redox probes indicate that the alkynyl C-Au contacted monolayer of 1 presents a relatively low barrier for electron transfer. This contrasts with monolayer films on gold of other oligo(phenylene ethynylene) derivatives of comparable length and surface coverage, but with different contacting groups. Additionally, a low voltage transition (V-trans = 0.51 V) from direct tunneling (rectangular barrier) to field emission (triangular barrier) is observed. This low transition voltage points to a low tunneling barrier, which is consistent with the facile electron transport observed through the C-Au contacted self-assembled monolayer of 1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Single molecule vs. large area design of molecular electronic devices incorporating an efficient 2-aminepyridine double anchoring group

  • Herrer, L.
  • Ismae, l A.
  • Martín, S.
  • Milan, D.C.
  • Serrano, J.L.
  • Nichols, R.J.
  • Lambert, C.
  • Cea, P.
When a molecule is bound to external electrodes by terminal anchor groups, the latter are of paramount importance in determining the electrical conductance of the resulting molecular junction. Here we explore the electrical properties of a molecule with bidentate anchor groups, namely 4, 4'-(1, 4-phenylenebis(ethyne-2, 1-diyl))bis(pyridin-2-amine), in both large area devices and at the single molecule level. We find an electrical conductance of 0.6 × 10-4G0 and 1.2 × 10-4G0 for the monolayer and for the single molecule, respectively. These values are approximately one order of magnitude higher than those reported for monodentate materials having the same molecular skeleton. A combination of theory and experiments is employed to understand the conductance of monolayer and single molecule electrical junctions featuring this new multidentate anchor group. Our results demonstrate that the molecule has a tilt angle of 30° with respect to the normal to the surface in the monolayer, while the break-off length in the single molecule junction occurs for molecules having a tilt angle estimated as 40°, which would account for the difference in their conductance values per molecule. The bidentate 2-aminepyridine anchor is of general interest as a contact group, since this terminal functionalized aromatic ring favours binding of the adsorbate to the metal contact resulting in enhanced conductance values. © 2019 The Royal Society of Chemistry.