Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 35
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

From Well-Defined Clusters to Functional Materials: Molecular Engineering of Amorphous Molybdenum Sulfides for Hydrogen Evolution Electrocatalysis

  • Gonell-Gómez, Francisco|||0000-0002-8658-2878
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Rodenes-Carrillo, Miriam
  • Martín, Santiago
  • Sorribes-Terrés, Iván
[EN] Developing precious-metal-free electrocatalysts for the hydrogen evolution reaction (HER) is crucial to establishing H-2 produced from renewable energy sources as an alternative energy carrier to fossil fuels. Amorphous molybdenum sulfide-based materials are promising candidates that provide highly active HER electrocatalysts by introducing active sites at both the edge positions and the typically inactive basal planes. Herein, we report an innovative bottom-up synthesis of amorphous molybdenum sulfides using molecular complexes with Mo3S4 and Mo3S7 cluster cores as building entities. The ability to control the precursor of choice has made it viable to enhance the HER activity of these materials. Furthermore, the tunability of the atomic composition of the molecular cluster precursors allows the modification of the derived materials with atomic-scale precision, enabling us to track the synthesis mechanism and, in combination with Density Functional Theory (DFT) calculations, to decipher the nature of the HER active sites., This work has been supported by the Gen-T Plan of the Generalitat Valenciana through the programs "Subvencions a l'Excellencia Cientifica de Juniors Investigadors" (SEJI/2020/ 018) and "Investigadors Doctors d'Exellencia" (CIDEXG/ 2022/22). Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. S.M. thanks DGA/fondos FEDER (construyendo Europa desde Aragon) for funding the research group Platon (E31_20R). M.R. and F.G. acknowledge the Vice-Rectorate for Research, Innovation and Transfer of the Universitat Politecnica de Valencia (UPV) for a pre- and postdoctoral (PAID-10-20) fellowship, respectively. The authors also thank the Electron Microscopy Service of the UPV for TEM facilities and Dr. G. Antorrena for technical support in XPS studies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multifunctional Catalysis of Nanosheet Defective Molybdenum Sulfide Basal Planes for Tandem Reactions Involving Alcohols and Molecular Hydrogen

  • Rodenes-Carrillo, Miriam
  • Dhaeyere, Frederic
  • Martín, Santiago
  • Sorribes-Terrés, Iván
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Establishingtandem catalytic synthetic strategies basedon theuse of readily available, stable, and renewable feedstocks is of greatsignificant for the sustainable advancement of chemical-related industries.The key to success largely relies on applying efficient multifunctionalcatalysts that allow carrying out one-pot single-step synthesis. Inthis work, we have demonstrated that defect-engineered basal planesof a molybdenum sulfide nanomaterial ({Mo3S4}( n )) offer a multifunctional catalyticplatform for chemical process intensification. By applying this catalyst,besides borrowing hydrogen-type processes, herein exemplified forthe thioetherification of alcohols, we have also disclosed novel andrare coupling reactions requiring hydrogen activation and alcoholdehydrogenation processes in a one-pot fashion. More specifically,oxidized nucleophiles, such as o-dinitroarenes anddinitrophenyl disulfides, are reacted with alcohols in the presenceof H-2 to yield respectively benzimidazoles and benzothiazoles.The uncommon catalytic reactivity of {Mo3S4}( n ) arises from the presence of coordinativelyunsaturated molybdenum and sulfide species, which work as Lewis acidand Lewis basic sites, respectively. As suggested by in situ infrared(IR) spectroscopy investigations, the alcohol dehydrogenation involvesthe participation of both types of active sites while the H-2 dissociation takes place on coordinatively unsaturated sulfide species., This work has been supported by the Gen-T Plan of the Generalitat Valenciana through the programs "Subvencions a l'Excel.le`ncia Cientifica de Juniors Investigadors" (SEJI/2020/018) and "Investigadors Doctors d'Exel.le`ncia" (CIDEXG/2022/22). Financial support by the Severo Ochoa Center of Excellence program (CEX2021-001230-S) is gratefully acknowledged. S.M. thanks DGA/fondos FEDER (construyendo Europa desde Aragon) for funding the research group Platon (E31_20R). M.R. acknowledges the Vice-Rectorate for Research, Innovation and Transfer of the Universitat Polite`cnica de Vale`ncia (UPV) for a pre-doctoral fellowship. F.D. thanks the ERASMUS+ program. The authors also thank the Electron Microscopy Service of the UPV for TEM and STEM facilities and Dr. G. Antorrena for technical support in XPS studies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Nanofabrication techniques in large-area molecular electronic devices

  • Herrer, L.
  • Martín, S.
  • Cea, P.
The societal impact of the electronics industry is enormous-not to mention how this industry impinges on the global economy. The foreseen limits of the current technology-technical, economic, and sustainability issues-open the door to the search for successor technologies. In this context, molecular electronics has emerged as a promising candidate that, at least in the short-term, will not likely replace our silicon-based electronics, but improve its performance through a nascent hybrid technology. Such technology will take advantage of both the small dimensions of the molecules and new functionalities resulting from the quantum effects that govern the properties at the molecular scale. An optimization of interface engineering and integration of molecules to form densely integrated individually addressable arrays of molecules are two crucial aspects in the molecular electronics field. These challenges should be met to establish the bridge between organic functional materials and hard electronics required for the incorporation of such hybrid technology in the market. In this review, the most advanced methods for fabricating large-area molecular electronic devices are presented, highlighting their advantages and limitations. Special emphasis is focused on bottom-up methodologies for the fabrication of well-ordered and tightly-packed monolayers onto the bottom electrode, followed by a description of the top-contact deposition methods so far used.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimization of pt-c deposits by cryo-fibid: Substantial growth rate increase and quasi-metallic behaviour

  • Salvador-Porroche, A.
  • Sangiao, S.
  • Philipp, P.
  • Cea, P.
  • De Teresa, J.M.
The Focused Ion Beam Induced Deposition (FIBID) under cryogenic conditions (Cryo-FIBID) technique is based on obtaining a condensed layer of precursor molecules by cooling the substrate below the condensation temperature of the gaseous precursor material. This condensed layer is irradiated with ions according to a desired pattern and, subsequently, the substrate is heated above the precursor condensation temperature, revealing the deposits with the shape of the exposed pattern. In this contribution, the fast growth of Pt-C deposits by Cryo-FIBID is demonstrated. Here, we optimize various parameters of the process in order to obtain deposits with the lowest-possible electrical resistivity. Optimized ~30 nm-thick Pt-C deposits are obtained using ion irradiation area dose of 120 µC/cm2 at 30 kV. This finding represents a substantial increment in the growth rate when it is compared with deposits of the same thickness fabricated by standard FIBID at room temperature (40 times enhancement). The value of the electrical resistivity in optimized deposits (~4 × 104 µO cm) is suitable to perform electrical contacts to certain materials. As a proof of concept of the potential applications of this technology, a 100 µm × 100 µm pattern is carried out in only 43 s of ion exposure (area dose of 23 µC/cm2), to be compared with 2.5 h if grown by standard FIBID at room temperature. The ion trajectories and the deposit composition have been simulated using a binary-collision-approximation Monte Carlo code, providing a solid basis for the understanding of the experimental results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Highly-efficient growth of cobalt nanostructures using focused ion beam induced deposition under cryogenic conditions: Application to electrical contacts on graphene, magnetism and hard masking

  • Salvador-Porroche A.
  • Sangiao S.
  • Magén C.
  • Barrado M.
  • Philipp P.
  • Belotcerkovtceva D.
  • Kamalakar M.V.
  • Cea P.
  • Teresa J.M. de
Emergent technologies are required in the field of nanoelectronics for improved contacts and interconnects at nano and micro-scale. In this work, we report a highly-efficient nanolithography process for the growth of cobalt nanostructures requiring an ultra-low charge dose (15 µC cm-2, unprecedented in single-step charge-based nanopatterning). This resist-free process consists in the condensation of a ~28 nm-thick Co2(CO)8 layer on a substrate held at -100 °C, its irradiation with a Ga+ focused ion beam, and substrate heating up to room temperature. The resulting cobalt-based deposits exhibit sub-100 nm lateral resolution, display metallic behaviour (room-temperature resistivity of 200 µO cm), present ferromagnetic properties (magnetization at room temperature of 400 emu cm-3) and can be grown in large areas. To put these results in perspective, similar properties can be achieved by room-temperature focused ion beam induced deposition and the same precursor only if a 2 × 103 times higher charge dose is used. We demonstrate the application of such an ultra-fast growth process to directly create electrical contacts onto graphene ribbons, opening the route for a broad application of this technology to any 2D material. In addition, the application of these cryo-deposits for hard masking is demonstrated, confirming its structural functionality. This journal is © The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Uncapped gold nanoparticles for the metallization of organic monolayers

  • Martín-Barreiro, Alba
  • Soto, Rogelio
  • Chiodini, Stefano
  • García-Serrano, Aitor
  • Martín, Santiago
  • Herrer, Lucia
  • Pérez-Murano, Francesc
  • Low, Paul J.
  • Serrano, José Luis
  • de Marcos, Susana
  • Galban, Javier
  • Cea, Pilar
Deposition of the top-contact electrode to create large-area electrode | monolayer | electrode junctions represents a contemporary challenge to the integration of molecular electronic phenomena into device structures. Here, a top contact electrode is formed on top of an organic monolayer over a large area (cm2) by two simple, sequential self-assembly steps. Initial self-assembly of 4,4′-(1,4-phenylenebis(ethyne-2,1-diyl))dianiline onto gold-on-glass substrates gives high-quality monolayers. The exposed amine functionality is subsequently used to anchor uncapped gold nanoparticles deposited in a second self-assembly step. These uncapped gold nanoparticles are prepared by thermolysis of lipoic acid stabilized gold nanoclusters and contain gold oxide (≈9%) that provides stability in the absence of an organic capping ligand. This two-step procedure results in full coverage of the monolayer by the densely packed gold nanoparticles, which spontaneously condense to give a semi-continuous film. The electrical properties of these junctions are determined from I–V curves, revealing uniform electrical response and absence of metallic short-circuits or evidence of damage to the underlying molecular monolayer. These promising electrical characteristics suggest that the deposition of uncapped gold nanoparticles on suitably functionalized molecular monolayers provides a path for the fabrication of molecular electronic devices using simple methodologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

L-menthol-based eutectic solvents: characterization and application in the removal of drugs from water

  • Bergua, Fernando
  • Castro, Miguel
  • Muñoz-Embid, José
  • Lafuente, Carlos
  • Artal, Manuela
Increasing the sustainability of industrial processes implies the substitution of conventional solvents for others with less environmental impact. For its implementation, it is essential to know the value of the thermodynamic and transport properties. In addition, having theories and correlations to predict their behaviour under varied conditions is very interesting. In this work, we performed the thermophysical characterization of eutectic mixtures formed by L-menthol and medium chain fatty acids, deepening the study of the polymorphic behaviour of L-menthol. In addition, we studied their ability both to dissolve drugs that are poorly soluble in water and to extract them from contaminated water. From the results, we can deduce that these mixtures may be suitable solvents in liquid-liquid extractions, although multistage processes can be necessary.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thermophysical characterization of choline chloride: Resorcinol and its mixtures with water

  • Lomba, Laura
  • Tucciarone, Federica
  • Giner, Beatriz
  • Artal, Manuela
  • Lafuente, Carlos
The study of deep eutectic solvents has increased in recent years. This is because of their great solubility ability and lower toxicity than usual organic solvents. In this work, deep eutectic solvents formed by choline chloride and resorcinol in the mole ratio 1:2 and its mixtures with water, e.g., choline chloride:resorcinol:water 1:2:1.05 (water mass fraction = 0.05) and choline chloride:resorcinol:water 1:2:2.22 (water mass fraction = 0.1), have been studied. Several physicochemical properties (density, speed of sound, isentropic compressibility, refractive index, surface tension, isobaric molar heat capacity, viscosity, and electrical conductivity) have been obtained and analysed at atmospheric pressure in the range of 283.15–338.15 K. The starting temperature for the speed of sound measurements was 308.15 K. The effects of temperature and water inclusion have been evaluated. The obtained results have shown a linear correlation between density, speed of sound, refractive index, surface tension and isobaric molar heat capacity and temperature. Additionally, the viscosity and electrical conductivity data can be adjusted using the Vogel-Fulcher-Tammann equation. Finally, the inclusion of water was analysed to check how the thermophysical properties were modified. These modifications had greater effects on transport properties, viscosity and electrical conductivity. © 2022
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reduced graphene oxides as carbocatalysts in acceptorless dehydrogenation of N-heterocycles

  • Mollar-Cuni A.
  • Ventura-Espinosa D.
  • Martín S.
  • García H.
  • Mata J.A.
The catalytic properties of graphene-derived materials are evaluated in acceptorless dehydrogenation of N-heterocycles. Among them, reduced graphene oxides (rGOs) are active (quantitative yields in 23 h) under mild conditions (130 °C) and act as efficient heterogeneous carbocatalysts. rGO exhibits reusability and stability at least during eight consecutive runs. Mechanistic investigations supported by experimental evidence (i.e., organic molecules as model compounds, purposely addition of metal impurities and selective functional group masking experiments) suggest a preferential contribution of ketone carbonyl groups as active sites for this transformation. ©
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Building large-scale unimolecular scaffolding for electronic devices

  • Escorihuela, E.
  • Concellón, A.
  • Marín, I.
  • Kumar, V.J.
  • Herrer, L.
  • Moggach, S.A.
  • Vezzoli, A.
  • Nichols, R.J.
  • Low, P.J.
  • Cea, P.
  • Serrano, J.L.
  • Martín, S.
The fabrication of a future generation of (opto)electronic devices based on molecular components and materials will require careful chemical design, coupled with assembly methods that permit precise spatial orientation and arrangement of the functional molecules within device structures. Although unimolecular electronics are already a laboratory reality, the variation in the arrangement of the molecule within a molecular junction from measurement to measurement is considerable. Consequently, controlling the precise geometry at the molecule–metal contacts is a long-standing and largely unresolved challenge. Here, a strategy to fabricate uniform unimolecular junctions distributed in a regular pattern is reported. A monolayer of zinc metalloporphyrins, peripherally functionalised by bulky dendrons, is used to provide a well-defined array of molecular binding sites with precise spatial distribution. The dendrons are then photochemically cross-linked to form a robust base-layer. Parallel, uniformly-spaced unimolecular structures are subsequently assembled on these binding sites through a layer-by-layer (LbL) strategy. This LbL strategy proceeds through coordination of an α,ω-amino functionalised oligo(phenylene)ethynylene (OPE) molecule to the zinc ions of the metalloporphyrin template base-layer. The structure is then extended through alternating self-assembled layers of (cross-linked) zinc porphyrin and OPE. The coordination interaction between the zinc(II) sites and the bifunctional OPE wire ensures a high degree of registry between the layers and good electrical contact through the extended arrays and offer fine control over the chemical composition.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Surface and calorimetric behavior of N, N-Dimethylacetamide with n-Alkanols or 2-Alkanols

  • Mrad, Sahar
  • Tejedor, Inés
  • Hichri, Monia
  • Lafuente, Carlos
The surface tension at the liquid–air interface of eight binary mixtures formed by N,N-dimethylacetamide and n-alkanols (from methanol to 1-pentanol) or 2-alkanols (from 2-propanol to 2-pentanol) was studied at three different temperatures (283.15, 298.15, and 313.15 K) and a pressure of 0.1 MPa. Surface tension deviations were also calculated. Moreover, the excess molar enthalpies for all of these mixtures were measured at T = 298.15 K and a pressure of 0.1 MPa. Both deviation and excess functions were correlated with the mole fraction by means of the Redlich–Kister equation. The surface tension deviations are found to be positive for the system containing methanol, sigmoidal for ethanol and negative for the rest of the alkanols. With regard to excess molar enthalpies, negative values are found for the system containing methanol, sigmoidal values for ethanol, and positive values for the rest of the alkanols.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Characteristics of phospholipid–immunosuppressant–antioxidant mixed langmuir–blodgett films

  • Jurak, M.
  • Szafran, K.
  • Cea, P.
  • Martín, S.
Hemocompatibility is one of the major criteria for the successful cardiovascular applicability of novel biomaterials. In this context, monolayers of certain biomolecules can be used to improve surface biocompatibility. To this end, biocoatings incorporating a phospholipid (1,2-dioleoyl-sn-glycero-3-phosphocholine, DOPC), an immunosuppressant (cyclosporine A, CsA), and an antioxidant material (lauryl gallate, LG) were fabricated by depositing Langmuir films onto gold or mica substrates using the Langmuir–Blodgett (LB) technique. These LB monolayers were thoroughly characterized by means of quartz crystal microbalance (QCM), atomic force microscopy (AFM), cyclic voltammetry (CV), and contact angle (CA) measurements. The obtained results indicate that the properties of these LB films are modulated by the monolayer composition. The presence of LG in the three-component systems (DOPC–CsA–LG) increases the molecular packing and the surface coverage of the substrate, which affects the wettability of the biocoating. From the different compositions studied here, we conclude that DOPC–CsA–LG monolayers with a DOPC/CsA ratio of 1:1 and LG molar fractions of 0.50 and 0.75 exhibit improved surface biocompatible characteristics. These results open up new perspectives on our knowledge and better understanding of phenomena at the biomaterial/host interface.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-Throughput Direct Writing of Metallic Micro- and Nano-Structures by Focused Ga+Beam Irradiation of Palladium Acetate Films; 35671475

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Philipp, Patrick
  • Cea, Pilar
  • De Teresa, José María
Metallic nanopatterns are ubiquitous in applications that exploit the electrical conduction at the nanoscale, including interconnects, electrical nanocontacts, and small gaps between metallic pads. These metallic nanopatterns can be designed to show additional physical properties (optical transparency, plasmonic effects, ferromagnetism, superconductivity, heat evacuation, etc.). For these reasons, an intense search for novel lithography methods using uncomplicated processes represents a key on-going issue in the achievement of metallic nanopatterns with high resolution and high throughput. In this contribution, we introduce a simple methodology for the efficient decomposition of Pd3(OAc)6 spin-coated thin films by means of a focused Ga+ beam, which results in metallic-enriched Pd nanostructures. Remarkably, the usage of a charge dose as low as 30 µC/cm2 is sufficient to fabricate structures with a metallic Pd content above 50% (at.) exhibiting low electrical resistivity (70 µ¿·cm). Binary-collision-approximation simulations provide theoretical support to this experimental finding. Such notable behavior is used to provide three proof-of-concept applications: (i) creation of electrical contacts to nanowires, (ii) fabrication of small (40 nm) gaps between large metallic contact pads, and (iii) fabrication of large-area metallic meshes. The impact across several fields of the direct decomposition of spin-coated organometallic films by focused ion beams is discussed. © 2022 The Authors. Published by American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Low-resistivity Pd nanopatterns created by a direct electron beam irradiation process free of post-treatment steps

  • Salvador-Porroche, Alba
  • Herrer, Lucia
  • Sangiao, Soraya
  • de Teresa, Jose Maria
  • Cea, Pilar
Abstract The ability to create metallic patterned nanostructures with excellent control of size, shape and spatial orientation is of utmost importance in the construction of next-generation electronic and optical devices as well as in other applications such as (bio)sensors, reactive surfaces for catalysis, etc. Moreover, development of simple, rapid and low-cost fabrication processes of metallic patterned nanostructures is a challenging issue for the incorporation of such devices in real market applications. In this contribution, a direct-write method that results in highly conducting palladium-based nanopatterned structures without the need of applying subsequent curing processes is presented. Spin-coated films of palladium acetate were irradiated with an electron beam to produce palladium nanodeposits (PdNDs) with controlled size, shape and height. The use of different electron doses was investigated and its influence on the PdNDs features determined, namely: (1) thickness of the deposits, (2) atomic percentage of palladium content, (3) oxidation state of palladium in the deposit, (4) morphology of the sample and grain size of the Pd nanocrystals and (5) resistivity. It has been probed that the use of high electron doses, 30000 μC·cm-2 results in the lowest resistivity reported to date for PdNDs, namely 145.1 μΩ·cm, which is only one order of magnitude higher than metallic palladium. This result paves the way for development of simplified lithography processes of nanostructured deposits avoiding subsequent post-treatment steps.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thymol+l-menthol eutectic mixtures: Thermophysical properties and possible applications as decontaminants

  • Bergua, Fernando
  • Castro, Miguel
  • Lafuente, Carlos
  • Artal, Manuela
The substitution of conventional organic solvents for others with less environmental impact is one of the basic premises of green chemistry. To carry this out optimally, tools based on the similarity of thermophysical behaviour are being developed. Thus, the characterization of new solvents is a key step in any field of application. In this work, we studied the eutectic hydrophobic thymol + l-menthol system. The solid–liquid equilibrium of the system and several properties of three of its mixtures close to eutectic composition were measured and discussed. Calculations and correlations were performed to obtain properties of interest such as the internal pressure, critical temperature, and solubility parameter, among others. To predict the system behaviour under any operating conditions, the PC-SAFT equation of state was validated. Considering the problem of the presence of drugs as micro pollutants in the environment, the ability of this eutectic system to both dissolve drugs and remove them from contaminated water was also analysed. The results showed a strong thymol-l-menthol interaction, and a higher thymol ratio made the liquid more compact and structured but less polar and viscous. The difference in densities with respect to that of water and the moderate viscosity values indicated that this system can be an adequate solvent in liquid–liquid extraction processes. The solubilities of quercetin (), nitrofurantoin () and tetracycline () were enhanced in the eutectic mixtures; for , the solubility was 10000-fold higher than that in water. Finally, this system could be used to remove traces of and from the water, with an efficiency of up to 81 %.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Surface tensions of Alkyl Lactates with n-Alkanols or branched Alkanols

  • Almodovar, Carmen
  • Artigas, Héctor
  • Wacharine, Saoussen
  • Antar, Kaïs
  • Lafuente, Carlos
The surface behavior of 18 binary mixtures at T = 298.15 K and at atmospheric pressure (p = 0.1 MPa) was measured with a drop volume tensiometer. These mixtures are formed by alkyl lactates (methyl lactate and ethyl lactate) and alcohols (n-alkanols from methanol to 1-hexanol and isomeric butanols). Surface tension deviations for all these systems were calculated and correlated with the mole fraction using the Myers–Scott equation. For the mixtures alkyl lactate with methanol, the surface tension deviations are positive. With regard to the mixtures containing ethanol, the surface tension deviation is positive for methyl lactate and slightly negative in the lactate-poor region for ethyl lactate. For the rest of the mixtures, the surface tension deviations are negative. A molecular interpretation of the different behaviors observed was proposed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gold nanoparticle-catalysed functionalization of carbon–hydrogen bonds by carbene transfer reactions

  • Martínez-Laguna, J.
  • Mollar-Cuni, A.
  • Ventura-Espinosa, D.
  • Martín, S.
  • Caballero, A.
  • Mata, J. A.
  • Pérez, P. J.
Gold nanoparticles stabilized by NHC ligands and supported onto reduced graphene oxide (rGO) catalyse the functionalization of cyclohexane and benzene C–H bonds upon insertion of carbene CHCO2Et (from N2[double bond, length as m-dash]CHCO2Et) groups. This is the first example in which such Csp3-H or Csp2-H bonds are functionalized with this strategy with nanoparticulated gold. This Au-NP@rGO material shows an exceptional activity, providing TON values 5–10 times higher than those already reported for molecular gold catalysts. Recyclability is also effective, reaching an accumulated TON value of 1400 after six consecutive uses.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Langmuir and Langmuir–Blodgett technologies as nanoarchitectonic tools for the incorporation of curcumin in membrane systems

  • Dotor, Laura
  • García-Pinilla, José Miguel
  • Martín, Santiago
  • Cea, Pilar
Curcumin (CCM) is a molecule of particular interest in health applications due to its wide spectrum of benefits for humans. However, its water-insoluble character and low bioavailability have so far prevented its extended use as a therapeutic agent. Incorporation of CCM in drug delivery vehicles (liposomes, vesicles, exosomes, etc.) is expected to contribute to increasing its bioavailability. Studies of the affinity of CCM with the components of the membrane systems of such vehicles and determination of factors that may enhance curcumin entrapment in biological membranes are of fundamental importance. To that end, here we take advantage of the nanoarchitectonic capabilities of the Langmuir technique for the construction of model cell membranes and determination of thermodynamic properties in mixed films. The obtained results may serve to: (i) provide some light on the miscibility of CCM with the components in the cell membrane and (ii) determine the optimal conditions for the fabrication of membrane systems incorporating CCM. For that, binary and ternary mixed Langmuir films of CCM, DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) and CHOL (cholesterol) have been prepared. Whilst binary mixtures of DPPC and CCM exhibit poor miscibility and even phase segregation, CHOL has shown itself as a key element to promote the incorporation of CCM in the phospholipidic membrane containing DPPC. Both the thermodynamic studies of the ternary Langmuir films and the Atomic Force Microscopy (AFM) images of Langmuir–Blodgett films have shown that ternary mixed films with a molar fraction composition of xDPPC/xCHOL/xCCM = 0.4/0.4/0.2 exhibit good miscibility, stability, and result in monolayers with a very homogeneous topography.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sheathed molecular junctions for unambiguous determination of charge-transport properties

  • Herrer, Lucia
  • Naghibi, Saman
  • Marín, Ivan
  • Ward, Jonathan S.
  • Bonastre, Jose María
  • Higgins, S. J.
  • Martín, Santiago
  • Vezzoli, Andrea
  • Nichols, Richard John
  • Serrano, José Luis
  • Cea, Pilar
Future applications of single-molecular and large-surface area molecular devices require a thorough understanding and control of molecular junctions, interfacial phenomena, and intermolecular interactions. In this contribution the concept of single-molecule junction and host-guest complexation to sheath a benchmark molecular wire–namely 4,4′-(1,4-phenylenebis(ethyne-2,1-diyl))dianiline – with an insulating cage, pillar[5]arene 1,4-diethoxy-2-ethyl-5-methylbenzene is presented. The insertion of one guest molecular wire into one host pillar[5]arene is probed by 1H-NMR (nuclear magnetic resonance), whilst the self-assembly capabilities of the amine-terminated molecular wire remain intact after complexation as demonstrated by XPS (X-ray photoelectron spectroscopy) and AFM (atomic force microscopy). Encapsulation of the molecular wire prevents the formation of π- π stacked dimers and permits the determination of the true single molecule conductance with increased accuracy and confidence, as demonstrated here by using the STM–BJ technique (scanning tunneling microscopy– break junction). This strategy opens new avenues in the control of single-molecule properties and demonstrates the pillararenes capabilities for the future construction of arrays of encapsulated single-molecule functional units in large-surface area devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluation of triphenylene-based MOF ultrathin films for lithium batteries

  • Ciria-Ramos, Isabel
  • Tejedor, Inés
  • Caparros, Lucía
  • Doñagueda, Beatriz
  • Lacruz, Oscar
  • Urtizberea, Ainhoa
  • Roubeau, Olivier
  • Gascón, Ignacio
  • Haro, Marta
Metal–organic frameworks (MOFs) are attractive candidates to meet the requirement of next-generation batteries, as functional materials with a high surface area, well-defined metal centers, and organic linkers through coordination bonds. Due to their great tunability, MOFs have been investigated as electrodes or electrolytes in lithium batteries and more recently as protective layers in anode-less batteries. Here, we synthesize a Ni3(HHTP)2 MOF directly at the air–liquid interface of a Langmuir trough and grow the electrode on a conductive substrate by the transference process. The characterization during Langmuir film formation shows that the addition of crystallization time during the compression process enhances the formation of 2D crystalline domains, as observed by in situ grazing-incidence X-ray diffraction. Next, the transferred Ni3(HHTP)2 ultrathin films were studied as working electrodes in Li batteries in a half-cell configuration and compared with bare copper. The results show that the Ni3(HHTP)2 film protects the Cu collector from oxidation, and the negative charge accumulates in the organic ligand during the lithiation process while NiII oxidizes to NiIII, unlike other triphenylene-based MOFs with CuII or CoII metal nodes. The galvanostatic plating–stripping cycles of the batteries show that the inclusion of the crystallization time improves the coulombic efficiency, especially significantly in the first cycles when the SEI is formed. This work shows the Langmuir technique as a useful tool to test MOF based materials for batteries with the advantages of using a low amount of raw materials and without the need to introduce additives (binder and electron conductor) in the electrodes. The electrochemical study of this type of electrode allows a first screening to synthesize electrodes based on MOFs and can be a tool for the preparation of protective coatings under optimized conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

pVT behaviour of hydrophilic and hydrophobic eutectic solvents

  • Hernández-Serrano, V.
  • Muñoz-Embid, J.
  • Bergua, F.
  • Lafuente, C.
  • Artal, M.
Among the basic principles of green chemistry is the search for less harmful alternative solvents than conventional solvents. Knowing the thermophysical properties of fluids under different pressure and temperature conditions is essential to propose them. Herein, we present data on the densities at several pressures (from 0.1 to 65 MPa) and temperatures (from 283.15 to 338.15 K) of two deep eutectic solvents with hydrophilic characteristics (choline chloride + ethylene glycol or glycerol) and two eutectic solvents with hydrophobic characteristics (camphor + thymol or menthol). We used the Tait equation of state to correlate and calculate derived properties. Moreover, we modelled the mixtures with the PC-SAFT equation of state. The results showed that the hydrophilic solvents were more compact than the hydrophobic ones. The former exhibited an abnormal thermal behaviour of the isobaric thermal expansibility. The deviations in the correlation of densities with the thermodynamic model were between 0.5 and 3%. They were lower for the mixtures with weaker interactions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A supramolecular helicate with two independent Fe(II)switchable centres and a[Fe(anilate)3]3 guest

  • Barrios, Leoní A.
  • Teat, Simon. J.
  • Roubeau, Olivier
  • Aromí, Guillem
A biphenyl-spaced bis-pyrazolylpyridine ligand interacts with ferrous ions to engender a dimetallic helical coordination cage that encapsulates an Fe3+ tris-anilate complex. The host–guest interaction breaks the symmetry of the Fe2+ centers causing a differential spin crossover behavior in them that can be followed in great detail crystallographically..
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dilute Gd hydroxycarbonate particles for localized spin qubit integration

  • Tejedor, Inés
  • Urtizberea, Ainhoa
  • Natividad, Eva
  • Martínez, Jesús I.
  • Gascón, Ignacio
  • Roubeau, Olivier
Molecular spins are considered as the quantum hardware to build hybrid quantum processors in which coupling to superconducting devices would provide the means to implement the necessary coherent manipulations. As an alternative to large magnetically-dilute crystals or concentrated nano-scale deposits of paramagnetic molecules that have been studied so far, the use of pre-formed sub-micronic spherical particles of a doped Gd@Y hydroxycarbonate is evaluated here. Particles with an adjustable number of spin carriers are prepared through the control of both particle size and doping. Bulk magnetic properties and continuous wave and time-domain-EPR spectroscopy show that the Gd spins in these particles are potential qubits with robust quantum coherence. Monolayers of densely-packed particles are then formed interfacially and transferred successfully to the surface of Nb superconducting resonators. Alternatively, these particles are disposed at controlled localizations as isolated groups of a few particles through Dip-Pen Nanolithography using colloidal organic dispersions as ink. Altogether, this study offers new material and methodologies relevant to the development of viable hybrid quantum processors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

From well-defined clusters to functional materials: molecular Engineering of amorphous molybdenum sulfides for hydrogen evolution Electrocatalysis

  • Gonell, Francisco
  • Rodenes, Miriam
  • Martín, Santiago
  • Boronat, Mercedes
  • Sorribes, Iván
  • Corma, Avelino
Developing precious-metal-free electrocatalysts for the hydrogen evolution reaction (HER) is crucial to establishing H2 produced from renewable energy sources as an alternative energy carrier to fossil fuels. Amorphous molybdenum sulfide-based materials are promising candidates that provide highly active HER electrocatalysts by introducing active sites at both the edge positions and the typically inactive basal planes. Herein, we report an innovative bottom-up synthesis of amorphous molybdenum sulfides using molecular complexes with Mo3S4 and Mo3S7 cluster cores as building entities. The ability to control the precursor of choice has made it viable to enhance the HER activity of these materials. Furthermore, the tunability of the atomic composition of the molecular cluster precursors allows the modification of the derived materials with atomic-scale precision, enabling us to track the synthesis mechanism and, in combination with Density Functional Theory (DFT) calculations, to decipher the nature of the HER active sites.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Single-molecule conductance behavior of molecular bundles

  • Bara-Estaún, Alejandro
  • Planje, Inco J.
  • Almughathawi, Renad
  • Naghibi, Saman
  • Vezzoli, Andrea
  • Milan, David C.
  • Lambert, Colin
  • Martin, Santiago
  • Cea, Pilar
  • Nichols, Richard J.
  • Higgins, Simon J.
  • Yufit, Dmitry S.
  • Sangtarash, Sara
  • Davidson, Ross J.
  • Beeby, Andrew
Controlling the orientation of complex molecules in molecular junctions is crucial to their development into functional devices. To date, this has been achieved through the use of multipodal compounds (i.e., containing more than two anchoring groups), resulting in the formation of tri/tetrapodal compounds. While such compounds have greatly improved orientation control, this comes at the cost of lower surface coverage. In this study, we examine an alternative approach for generating multimodal compounds by binding multiple independent molecular wires together through metal coordination to form a molecular bundle. This was achieved by coordinating iron(II) and cobalt(II) to 5,5′-bis(methylthio)-2,2′-bipyridine (L1) and (methylenebis(4,1-phenylene))bis(1-(5-(methylthio)pyridin-2-yl)methanimine) (L2) to give two monometallic complexes, Fe-1 and Co-1, and two bimetallic helicates, Fe-2 and Co-2. Using XPS, all of the complexes were shown to bind to a gold surface in a fac fashion through three thiomethyl groups. Using single-molecule conductance and DFT calculations, each of the ligands was shown to conduct as an independent wire with no impact from the rest of the complex. These results suggest that this is a useful approach for controlling the geometry of junction formation without altering the conductance behavior of the individual molecular wires.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A ferric guest inside a spin crossover ferrous helicate; 35411892

  • Barrios, L. A.
  • Diego, R.
  • Darawsheh, M.
  • Martínez Martínez , J. I.
  • Roubeau, O.
  • Aromí, G.
A designed dimetallic Fe(ii) helicate made with biphenylene-bridged bispyrazolylpyridine ligands and exhibiting a process of spin crossover at temperatures above ambient is shown to encapsulate an S = 5/2 tris-oxalato Fe(iii) ion. The spin relaxation dynamics of this guest are strongly reduced upon encapsulation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dependence on both the hydrocarbon chain length and the hydroxyl group position of the thermophysical properties of N, N-dimethylacetamide with n-alkanol or 2-alkanol

  • Mrad, S.
  • Abidi, R.
  • Artigas, H.
  • Hichri, M.
  • Lafuente, C.
This work reports thermophysical properties measurements of binary mixtures of N, N-dimethylacteamide with 1-pentanol and 2-pentanol. Density, ¿, speed of sound, u, refractive index, nD, and kinematic viscosity, ¿, were measured over the whole composition range at the temperatures (283.15, 298.15 and 313.15) K and at atmospheric pressure p = 0.1 MPa. Experimental data were used to calculate the following properties: excess molar volume, VE, excess isentropic compressibility, ¿SE, refractive index deviation, ¿nD, and viscosity deviation, ¿¿. These properties were correlated with mole fraction or volume fraction using the Redlich-Kister equation. Excess molar volumes were positive for both mixtures although there are some slight negative VE values for the system containing 1-pentanol at lower temperatures and at lower mole fractions. Refractive index deviation behaviour against composition for (N, N-dimethylacetamide + 1-pentanol) was sigmoidal at lower temperatures and negative at T = 313.15 K, on the other hand ¿nD values are negative for the mixture with 2-pentanol. Excess isentropic compressibilities and viscosity deviations were negative for the two systems. The results obtained were interpreted based on both structural and energetic effects. These results were further compared with our previous results for mixtures containing N, N-dimethylacetamide and several n-alkanols or 2-alkanols in order to understand both the influence of the hydrocarbon chain length and the hydroxyl group position.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thermophysical Study of Pyridinium-Based Ionic Liquids Sharing Ions

  • Reinado, Christian
  • Pelegrina, Adrián
  • Sánchez Rubio, Miguel
  • Artigas, Héctor
  • Lafuente, Carlos
The thermophysical properties of three pyridinium-based ionic liquids sharing ions were measured at several temperatures (278.15-338.15) K and at atmospheric pressure (0.1 MPa). Three ionic liquids were studied: 1-butylpyridinium bis(trifluoromethyl-sulfonyl)imide, 1-hexylpyridinium bis(trifluoromethylsulfonyl)imide, and 1-hexylpyridinium tetrafluoroborate. The following thermophysical properties were measured: density, speed of sound, refractive index, surface tension, isobaric molar heat capacity, kinematic viscosity, and electrical conductivity. The thermophysical properties at atmospheric pressure were correlated with temperature, noting that the starting temperature for the speed of sound measurements depended on the ionic liquid. From these experimental results, some derived properties (isentropic compressibility, molar refraction, and dynamic viscosity) are calculated. These results together with those published previously for 1-butylpyridinium tetrafluoroborate are discussed. © 2022 American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Towards new fluorometric methodologies based on the in-situ generation of gold nanoclusters

  • Navarro, Jesús
  • Cepriá, Gemma
  • Camacho-Aguayo, Javier
  • Martín, Santiago
  • González Orive, Alejandro
  • de Marcos, Susana
  • Galbán, Javier
In this manuscript a method for the fluorometric determination of tyramine is described. It is based on the direct reaction between Au(III) and tyramine in a phosphate buffer which produces fluorescent gold nanoclusters (AuNC) (λexc = 320 nm, λem = 410 nm) with a diameter of 1.50 ± 0.06 nm. The Au(III) and buffer solutions are mixed and after 140 s, tyramine solution is added; which produces a fast and stable fluorescence signal. The formation of AuNC is demonstrated by STEM and, more importantly, this reaction could be followed by Atomic Fluorescence Microscopy (AFM). The method allows the determination of tyramine in the range from 6.0x10−7 M (limit of quantification) up to 1.2x10−4 M; with a relative standard deviation (RSD) ranges from 1.8% to 4.4% depending on the tyramine concentration. The mechanism of AuNC formation involves the Au(III) reduction via the phenol group and the complexation with the amine group. Putrescine and cadaverine do not produce interference, meanwhile histamine causes a proportional decrease in the signal which can be overcome by the standard addition method. The method was applied to the determination of tyramine in a tuna and cheese samples and the results obtained are in statistical agreement with these obtained using a validated or standard method.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced power-point tracking for high-hysteresis perovskite solar cells with a galvanostatic approach

  • Juarez-Perez, Emilio J.
  • Momblona, Cristina
  • Casas, Roberto
  • Haro, Marta
Harnessing the untapped potential of solar energy sources is crucial for achieving a sustainable future, and accurate maximum-power-point tracking of solar cells is vital to maximizing their power generation. This article introduces a power-tracking algorithm and cost-effective hardware for long-term operational stability measurements in perovskite solar cells. Existing algorithms for photovoltaic technology lead to suboptimal performance when applied to the most stable perovskite devices (for example, triple-mesoscopic hole-transport-material-free metal halide perovskite solar cells). To address this challenge, we developed a low-cost hardware solution for research purposes that enables concurrent long-term stability measurements in parallel with a galvanostatic-type power-tracking algorithm, ensuring superior operational performance for high-hysteresis perovskite solar cells. The suggested enhancements bear significant implications for the extensive integration of perovskite solar-cell technologies, particularly those dependent on power-optimizer devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Spin-coated films of gadolinium formate for cryogenic cooling

  • Tejedor, Inés
  • Calvo, María Isabel
  • Gandara-Loe, Jesús
  • Rubio-Giménez, Víctor
  • Ameloot, Rob
  • Gascón, Ignacio
  • Roubeau, Olivier
Continuous and homogenous films of spin-coated gadolinium formate provide a solution for efficient local cryogenic magnetic refrigeration. The films possess unprecedentedly high surface cooling power, enough to cool a 325 μm silicon wafer down to sub-K temperatures by a single demagnetization step from 2 K or even liquid He temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thermophysical Study of 1-Butyl-2-methylpyridinium bis(trifluoromethylsulfonyl)imide and 1-Butyl-4-methylpyridinium bis(trifluoromethylsulfonyl)imide

  • Djebouri, Hamid
  • Didaoui, Saeda
  • Mrad, Sahar
  • Lafuente, Alberto
  • Lafuente, Carlos
Ionic liquids are of great interest for scientists and chemical industries owing to their fascinating properties and their versatile applications. Herein, we focus on the thermophysical properties of two isomeric pyridinium-based ionic liquids: 1-butyl-2-methylpyridinium bis(trifluoromethylsulfonyl)imide and 1-butyl-4-methylpyridinium bis(trifluoromethylsulfonyl)imide. Experimental investigation of the liquids involved the measurement of their thermodynamic and transport properties, namely, density, speed of sound, refractive index, surface tension, isobaric molar heat capacity, kinematic viscosity, and electrical conductivity. These measurements were performed in the temperature range of 278.15–323.15 K and ambient pressure of 100 kPa. Subsequently, additional properties such as isobaric expansivity, isentropic compressibility, free molar volume, and dynamic viscosity were calculated. Results were discussed considering the structural differences between the isomers, particularly focusing on the influence of the alkyl chain position in the cation on the investigated properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Protocol for building and using a maximum power point output tracker for perovskite solar cells

  • Sanz-Marco, Arturo
  • Jerónimo-Cruz, Rodrigo
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
We recently developed a galvanostatic maximum power point output (MPPT) algorithm for high-hysteresis perovskite solar cells (PSCs), enabling continuous and precise power tracking. Here, we present a protocol for assembling the tracker, implementing the algorithm on a microcontroller, and conducting JV scans and stabilized output power (SOP) or traditional perturb and observe (P&O) tracking for small-area photovoltaic cells. We also describe steps for collecting, storing, and plotting data and explain the device’s operational modes and functions. For complete details on the use and execution of this protocol, please refer to Juarez-Perez et al.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

pH control of conductance in a pyrazolyl Langmuir-Blodgett monolayer

  • Herrer, L.
  • Martín, S.
  • González-Orive, A.
  • Milan, D.C.
  • Vezzoli, A.
  • Nichols, R.J.
  • Serrano, J.L.
  • Cea, P.
In this contribution, pyrazole is identified as an excellent anchoring group capable of forming well-ordered Langmuir-Blodgett (LB) monolayers onto gold substrates. In contrast, the formation of self-assembled (SA) monolayers is prevented due to the extraction of gold atoms from the surface upon the incubation process required for the formation of these films. The electronic coupling strength of pyrazole-gold junctions is explored through evaluation of the electrical properties of LB films incorporating a double pyrazole terminated molecular wire, namely 1, 4-bis(1H-pyrazol-4-ylethynyl)benzene, 1; these electrical properties are compared with those of molecules having a similar chemical structure, geometry and length. The conductance value for LB films of1is high when the monolayer is transferred from a Langmuir film prepared onto a basic subphase, 1.19 × 10-4G0, as it is more than four times larger than the conductance of the same compound incorporated on a LB film prepared from a water subphase, 0.27 × 10-4G0. These results are interpreted in terms of the deprotonation of the pyrazole group in a basic media that leads to the formation of the pyrazolate (deprotonated pyrazole) moiety. This results in a more efficient electronic coupling with the gold tip of the scanning tunnelling microscope used for film characterization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Uncrosslinked Thermoresponsive Hybrid Magnetic Nanospheres Directly Prepared from Poly( <i>N</i> -isopropylacrylamide) that Behave as Heating Rate Nanosensors

  • García-Maestre, María
  • Cervera-Gabalda, Laura
  • Natividad, Eva
Poly(N-isopropylacrylamide) (PNIPAM) provides thermoresponsiveness to nanoobjects containing magnetic/plasmonic nanoparticles (NPs) for biosensing and biomedicine. Conjugation methods include the grafting of PNIPAM onto NPs or the embedding of NPs in PNIPAM nanogels. Nanoobjects are often obtained simultaneously with monomer (NIPAM) polymerization, and the cytotoxicity of unreacted NIPAM represents a non-negligible concern. Herein, a facile and versatile miniemulsion method employing already polymerized PNIPAM is developed. Miniemulsion is achieved through PNIPAM globulization above the lower critical solution temperature (LCST) and stabilized by poly(vinyl alcohol) (PVA). Aqueous decants, obtained after solvent evaporation, contain thermoresponsive nanospheres with PNIPAM/PVA blends, stable in water for months, monomodal in size at high magnetic NP contents, biocompatible and with hyperthermia capability. Unlike the shrinking/swelling displayed by PNIPAM-based nanogels, these uncrosslinked nanospheres disintegrate/rebuild, with a size after disintegration undoubtedly related to their heating rate across LCST, behaving as unprecedented dual hyperthermia agents and heating rate nanosensors without further sensing molecules.