Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 70
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sandwich-Type Zeolite Intergrowths with MFI and the Novel Extra-Large Pore IDM-1 as Ordered End-Members

  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
  • Li, Jian
  • Mayoral, Alvaro
  • Gao, Zihao Rei
  • Camblor, Miguel A.
[EN] Stacking faults are two-dimensional planar defects frequently arising in zeolites, modifying their properties and potentially affecting their performance in catalysis and separation applications. In classical zeolite intergrowths, a topologically unique zeolite layer may often pile up after some spatial transformation (lateral translation, rotation, and/or reflection) that may occur in different amounts or directions with about similar probabilities, leading to a difficult to control disorder. Here, we present a new kind of zeolite intergrowth that requires an additional topologically distinct layer rather than a spatial transformation of a unique one. Stacking of the so-called pentasil layers produces the well-known medium pore zeolite MFI. Intercalation in strict alternation of a topologically distinct second layer sandwiched between pentasil layers expands the structure to produce the new extra-large pore IDM-1. Stacking disorder modulates the structural expansion along the stacking direction. The disordered materials have been studied by simulation of the X-ray diffraction patterns using the program DIFFaX and by Cs-corrected high-resolution electron microscopy. We show that disorder does not occur at random but in extended domains and can be controlled all the way from MFI to IDM-1 by just varying the concentration of the synthesis mixture., The authors thank funding from the Spanish Ministry of Science, Innovation and Universities, under Projects MAT2015-71117-R (MINECO/FEDER, UE), PID2019105479RB-I00 and RTI2018-101599-B-C22 (MCUI/AEI/ FEDER, UE), the Swedish Research Council (VR), and the Knut and Alice Wallenberg Foundation (KAW). L.A.V. also thanks the Generalitat Valenciana (project PROMETEO/ 2018/024). A.M. acknowledges the Spanish Ministry of Science (RYC2018-024561-I) and the Regional government of Aragon (DGA E13_20R), the National Natural Science Foundation of China (NFSC-21850410448 and NSFC21835002), and the Centre for High-resolution Electron Microscopy (C.EM), supported by SPST of ShanghaiTech University under contract No. EM02161943.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rhodium Single-Atom Catalyst Design through Oxide Support Modulation for Selective Gas-Phase Ethylene Hydroformylation

  • Garcia-Farpon, Marcos
  • Plessow, Philipp N.
  • Andres-Marcos, Eva
  • Arenal, Raúl
  • Marini, Carlo
  • Agostini, Giovanni
  • Studt, Felix
  • Henao-Sierra, Wilson Albeiro
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] A frontier challenge in single-atom (SA) catalysis is the design of fully inorganic sites capable of emulating the high reaction selectivity traditionally exclusive of organometallic counterparts in homogeneous catalysis. Modulating the direct coordination environment in SA sites, via the exploitation of the oxide support's surface chemistry, stands as a powerful albeit underexplored strategy. We report that isolated Rh atoms stabilized on oxygen-defective SnO2 uniquely unite excellent TOF with essentially full selectivity in the gas-phase hydroformylation of ethylene, inhibiting the thermodynamically favored olefin hydrogenation. Density Functional Theory calculations and surface characterization suggest that substantial depletion of the catalyst surface in lattice oxygen, energetically facile on SnO2, is key to unlock a high coordination pliability at the mononuclear Rh centers, leading to an exceptional performance which is on par with that of molecular catalysts in liquid media., This work received funding from the European Research Council (ERC-2019-CoG 864195) and project RTI2018-096399-A-I00 funded by MCIN/AEI/10.13039/501100011033/ and "ERDF A way of making Europe". M.G.F, E.A. and W.H. acknowledge support by their predoctoral grants FPU17/04701, FPU17/04751 and PRE2019-087571, respectively. R.A. acknowledges support from the Spanish MICIN (PID2019-104739GB-100/AEI/10.13039/501100011033), Government of Aragon (DGA E13-20R) and EU H2020 "ESTEEM3" (823717). P.N.P and F.S. acknowledge support by the state of Baden-Wuerttemberg through bwHPC (bwunicluster and JUSTUS, RV bw17D011) and the Helmholtz Association. XAS experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff, R. Pelaez, N. Atashi and M.E. Martinez. M. Boronat is thanked for support with slab model relaxations. V. Recio, J.M. Salas, A. Munoz and M.D. Soriano are acknowledged for experimental contributions to catalyst synthesis, FTIR, Raman and XPS measurements, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw-Ndiaye, Fatou
  • Furgeaud, Clarisse
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
13 figures, 6 tables.-- Supplementary information available., Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells., E.J.J-P acknowledges the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (project grants PID2019-107893RB-I00 and EIN2020-112315, respectively). M.H. acknowledges the funding support from MCIN/AEI/10.13039/501100011033 for the Ramón y Cajal fellowship (RYC-2018-025222-I) and the project PID2019-108247RA-I00. R.A. acknowledges funding from the Spanish MICINN (project grant PID2019-104739 GB-100/AEI/10.13039/501100011033). RA also acknowledge to Government of Aragon (project DGA E13-20R (FEDER, EU)) and European Union H2020 program “ESTEEM3” (823717). A.A-C acknowledges financial support from Spanish MCIN/AEI/10.13039/501100011033 under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanowire Magnetic Force Sensors Fabricated by Focused-Electron-Beam-Induced Deposition

  • Mattiat, H.
  • Rossi, N.
  • Gross, B.
  • Pablo-Navarro, J.
  • Magén, C.
  • Badea, R.
  • Berezovsky, J.
  • De Teresa, J.M.
  • Poggio, M.
We demonstrate the use of individual magnetic nanowires (NWs), grown by focused-electron-beam-induced deposition (FEBID), as scanning magnetic force sensors. Measurements of their mechanical susceptibility, thermal motion, and magnetic response show that these NWs possess high-quality flexural mechanical modes and a strong remanent magnetization pointing along their long axis. Together, these properties make the NWs excellent sensors of weak magnetic field patterns, as confirmed by calibration measurements on a micron-sized current-carrying wire and magnetic scanning-probe images of a permalloy disk. The flexibility of FEBID in terms of the composition, geometry, and growth location of the resulting NWs, makes it ideal for fabricating scanning probes specifically designed for imaging subtle patterns of magnetization or current density.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Writing 3D Nanomagnets Using Focused Electron Beams

  • Fernandez-Pacheco, A.
  • Skoric, L.
  • De Teresa, J.M.
  • Pablo-Navarro, J.
  • Huth, M.
  • Dobrovolskiy, O.V.
Focused electron beam induced deposition (FEBID) is a direct-write nanofabrication technique able to pattern three-dimensional magnetic nanostructures at resolutions comparable to the characteristic magnetic length scales. FEBID is thus a powerful tool for 3D nanomagnetism which enables unique fundamental studies involving complex 3D geometries, as well as nano-prototyping and specialized applications compatible with low throughputs. In this focused review, we discuss recent developments of this technique for applications in 3D nanomagnetism, namely the substantial progress on FEBID computational methods, and new routes followed to tune the magnetic properties of ferromagnetic FEBID materials. We also review a selection of recent works involving FEBID 3D nanostructures in areas such as scanning probe microscopy sensing, magnetic frustration phenomena, curvilinear magnetism, magnonics and fluxonics, offering a wide perspective of the important role FEBID is likely to have in the coming years in the study of new phenomena involving 3D magnetic nanostructures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

3D superconducting hollow nanowires with tailored diameters grown by focused He+ beam direct writing

  • Cordoba, R.
  • Ibarra, A.
  • Mailly, D.
  • Guillamon, I.
  • Suderow, H.
  • De Teresa, J.M.
Currently, the patterning of innovative three-dimensional (3D) nano-objects is required for the development of future advanced electronic components. Helium ion microscopy in combination with a precursor gas can be used for direct writing of three-dimensional nanostructures with a precise control of their geometry, and a significantly higher aspect ratio than other additive manufacturing technologies. We report here on the deposition of 3D hollow tungsten carbide nanowires with tailored diameters by tuning two key growth parameters, namely current and dose of the ion beam. Our results show the control of geometry in 3D hollow nanowires, with outer and inner diameters ranging from 36 to 142 nm and from 5 to 28 nm, respectively; and lengths from 0.5 to 8.9 mu m. Transmission electron microscopy experiments indicate that the nanowires have a microstructure of large grains with a crystalline structure compatible with the face-centered cubic WC1-x phase. In addition, 3D electron tomographic reconstructions show that the hollow center of the nanowires is present along the whole nanowire length. Moreover, these nanowires become superconducting at 6.8 K and show high values of critical magnetic field and critical current density. Consequently, these 3D nano-objects could be implemented as components in the next generation of electronics, such as nano-antennas and sensors, based on 3D superconducting architectures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimization of pt-c deposits by cryo-fibid: Substantial growth rate increase and quasi-metallic behaviour

  • Salvador-Porroche, A.
  • Sangiao, S.
  • Philipp, P.
  • Cea, P.
  • De Teresa, J.M.
The Focused Ion Beam Induced Deposition (FIBID) under cryogenic conditions (Cryo-FIBID) technique is based on obtaining a condensed layer of precursor molecules by cooling the substrate below the condensation temperature of the gaseous precursor material. This condensed layer is irradiated with ions according to a desired pattern and, subsequently, the substrate is heated above the precursor condensation temperature, revealing the deposits with the shape of the exposed pattern. In this contribution, the fast growth of Pt-C deposits by Cryo-FIBID is demonstrated. Here, we optimize various parameters of the process in order to obtain deposits with the lowest-possible electrical resistivity. Optimized ~30 nm-thick Pt-C deposits are obtained using ion irradiation area dose of 120 µC/cm2 at 30 kV. This finding represents a substantial increment in the growth rate when it is compared with deposits of the same thickness fabricated by standard FIBID at room temperature (40 times enhancement). The value of the electrical resistivity in optimized deposits (~4 × 104 µO cm) is suitable to perform electrical contacts to certain materials. As a proof of concept of the potential applications of this technology, a 100 µm × 100 µm pattern is carried out in only 43 s of ion exposure (area dose of 23 µC/cm2), to be compared with 2.5 h if grown by standard FIBID at room temperature. The ion trajectories and the deposit composition have been simulated using a binary-collision-approximation Monte Carlo code, providing a solid basis for the understanding of the experimental results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Half-hedgehog spin textures in sub-100 nm soft magnetic nanodots

  • Berganza, E.
  • Jaafar, M.
  • Fernandez-Roldan, J.A.
  • Goiriena-Goikoetxea, M.
  • Pablo-Navarro, J.
  • Garcia-Arribas, A.
  • Guslienko, K.
  • Magen, C.
  • De Teresa, J.M.
  • Chubykalo-Fesenko, O.
  • Asenjo, A.
Topologically non-trivial structures such as magnetic skyrmions are nanometric spin textures of outstanding potential for spintronic applications due to their unique features. It is well known that Neel skyrmions of definite chirality are stabilized by the Dzyaloshinskii-Moriya exchange interaction (DMI) in bulk non-centrosymmetric materials or ultrathin films with strong spin-orbit coupling at the interface. In this work, we show that soft magnetic (permalloy) hemispherical nanodots are able to host three-dimensional chiral structures (half-hedgehog spin textures) with non-zero tropological charge. They are observed at room temperature, in absence of DMI interaction and they can be further stabilized by the magnetic field arising from the Magnetic Force Microscopy probe. Micromagnetic simulations corroborate the experimental data. Our work implies the existence of a new degree of freedom to create and manipulate complex 3D spin-textures in soft magnetic nanodots and opens up future possibilities to explore their magnetization dynamics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modulation of the Activity of Gold Clusters Immobilized on Functionalized Mesoporous Materials in the Oxidation of Cyclohexene via the Functional Group. The Case of Aminopropyl Moiety

  • Mato, A.
  • Agúndez, J.
  • Márquez-Álvarez, C.
  • Mayoral, Á.
  • Pérez-Pariente, J.
Gold nanoclusters and isolated gold atoms have been produced in a two-liquid phase procedure that involves a solution of gold in aqua regia and rosemary essential oil as organic layer. These gold entities have been immobilized on the ordered mesoporous silica material SBA-15 functionalized with different amounts of aminopropyl groups. The resulting materials have been characterized by XRD, N2 adsorption, chemical analysis, TGA, 29Si MAS NMR, 13C CP/MAS NMR, UV-vis spectroscopy, XPS, and STEM. The Au-containing materials retain the ordering and porosity of the pristine support. Gold content varies in the range of 0.07-0.7 wt% as a function of the specific immobilization conditions, while STEM evidences the presence of isolated gold atoms. XPS shows a shift of the Au 4f BE toward values lower than those of metallic gold. The catalytic activity in the oxidation of cyclohexene with molecular oxygen at atmospheric pressure parallels the Au content of the aminopropyl-SBA-15 supports. This activity is higher than that of analogous Au entities immobilized on SBA-15 functionalized with thiol or sulfonate groups, the activity decreasing in the order Au-NH2 > Au-SO3- > Au-SH. This behavior has been attributed to differences in the interaction strength between the functional group and the Au entities, which is optimum for the aminopropyl groups.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Customized MFM probes based on magnetic nanorods

  • Jaafar, M.
  • Pablo-Navarro, J.
  • Berganza, E.
  • Ares, P.
  • Magén, C.
  • Masseboeuf, A.
  • Gatel, C.
  • Snoeck, E.
  • Gómez-Herrero, J.
  • de Teresa, J.M.
  • Asenjo, A.
Focused Electron Beam Induced Deposition (FEBID) for magnetic tip fabrication is presented in this work as an alternative to conventional sputtering-based Magnetic Force Microscopy (MFM) tips. FEBID enables the growth of a high-aspect-ratio magnetic nanorod with customized geometry and composition to overcome the key technical limitations of MFM probes currently on the market. The biggest advantage of these tips, in comparison with CoCr coated pyramidal probes, lies in the capability of creating sharp ends, nearly 10 nm in diameter, which provides remarkable (topographic and magnetic) lateral resolution in samples with magnetic features close to the resolution limits of the MFM technique itself. The shape of the nanorods produces a very confined magnetic stray field, whose interaction with the sample is extremely localized and perpendicular to the surface, with negligible in-plane components. This effect can lead to a better analytical and numerical modelling of the MFM probes and to an increase in the sensitivity without perturbing the magnetic configuration of soft samples. Besides, the high-aspect ratio achievable in FEBID nanorod tips makes them magnetically harder than the commercial ones, reaching coercive fields higher than 900 Oe. According to the results shown, tips based on magnetic nanorods grown by FEBID can be eventually used for quantitative analysis in MFM measurements. Moreover, the customized growth of Co- or Fe-based tips onto levers with different mechanical properties allows MFM studies that demand different measuring conditions. To showcase the versatility of this type of probe, as a last step, MFM is performed in a liquid environment, which still remains a challenge for the MFM community largely due to the lack of appropriate probes on the market. This opens up new possibilities in the investigation of magnetic biological samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Focused-electron-beam engineering of 3d magnetic nanowires

  • Magén, C.
  • Pablo-Navarro, J.
  • De Teresa, J.M.
Focused-electron-beam-induced deposition (FEBID) is the ultimate additive nanofabrica-tion technique for the growth of 3D nanostructures. In the field of nanomagnetism and its techno-logical applications, FEBID could be a viable solution to produce future high-density, low-power, fast nanoelectronic devices based on the domain wall conduit in 3D nanomagnets. While FEBID has demonstrated the flexibility to produce 3D nanostructures with almost any shape and geometry, the basic physical properties of these out-of-plane deposits are often seriously degraded from their bulk counterparts due to the presence of contaminants. This work reviews the experimental efforts to understand and control the physical processes involved in 3D FEBID growth of nanomagnets. Co and Fe FEBID straight vertical nanowires have been used as benchmark geometry to tailor their dimensions, microstructure, composition and magnetism by smartly tuning the growth parameters, post-growth purification treatments and heterostructuring.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Topotactic transformation in SrFeO3- d triggered by low-dose Ga+ focused ion irradiation

  • Ferreiro-Vila, Elías
  • Bugallo, David
  • Magén, César
  • Rivadulla, Francisco
  • De Teresa, José María
We introduce a single-step lithography process based on Ga+-focused ion beam (FIB) irradiation to trigger a topotactic transformation on SrFeO3-d thin films, from the perovskite to the brownmillerite (BM) crystal structure. The crystallographic transformation is triggered by preferential oxygen sputtering by Ga+-FIB irradiation, which favors the formation of the SrFeO2.5 BM phase. The transformation has been verified through micro-Raman spectroscopy on thin films subjected to Ga+-FIB irradiation under 5 kV and 30 kV. Inducing crystallographic transformations by FIB in a single-step process (without the need of resists), at a very high speed (low Ga+ doses are required, in the range of 1015 ions/cm2), with very high spatial resolution (limited by the ion beam spot, of a few square nanometers) and with potential for upscaling using broad Ga+ beams, this approach represents a significant forward step over previous methods using multistep lithographic or electrochemical procedures. All these virtues make this process appealing to develop applications based not only on SrFeO3-d thin films but also on other oxide films harnessing topotactic transformations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Omnipresence of Weak Antilocalization (WAL) in Bi2Se3 Thin Films: A Review on Its Origin

  • Gracia Abad, Rubén
  • Sangiao Barral, Soraya
  • Bigi, Chiara
  • Chaluvadi, Sandeep Kumar
  • Orgiani, Pasquale
  • De Teresa Nogueras, José María
Topological insulators are materials with time-reversal symmetric states of matter in which an insulating bulk is surrounded by protected Dirac-like edge or surface states. Among topological insulators, Bi2Se3 has attracted special attention due to its simple surface band structure and its relatively large band gap that should enhance the contribution of its surface to transport, which is usually masked by the appearance of defects. In order to avoid this difficulty, several features characteristic of topological insulators in the quantum regime, such as the weak-antilocalization effect, can be explored through magnetotransport experiments carried out on thin films of this material. Here, we review the existing literature on the magnetotransport properties of Bi2Se3 thin films, paying thorough attention to the weak-antilocalization effect, which is omnipresent no matter the film quality. We carefully follow the different situations found in reported experiments, from the most ideal situations, with a strong surface contribution, towards more realistic cases where the bulk contribution dominates. We have compared the transport data found in literature to shed light on the intrinsic properties of Bi2Se3, finding a clear relationship between the mobility and the phase coherence length of the films that could trigger further experiments on transport in topological systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Relaxation Mechanisms and Strain-Controlled Oxygen Vacancies in Epitaxial SrMnO3 Films

  • Langenberg, Eric
  • Maurel, Laura
  • Antorrena, Guillermo
  • Algarabel, Pedro A.
  • Magén, César
  • Pardo, José A.
: SrMnO3 has a rich epitaxial strain-dependent ferroic phase diagram, in which a variety of magnetic orderings, even ferroelectricity, and thus multiferroicity, are accessible by gradually modifying the strain. Different relaxation processes, though, including the presence of strain-induced oxygen vacancies, can severely curtail the possibility of stabilizing these ferroic phases. Here, we report on a thorough investigation of the strain relaxation mechanisms in SrMnO3 films grown on several substrates imposing varying degrees of strain from slightly compressive (−0.39%) to largely tensile ≈+3.8%. First, we determine the strain dependency of the critical thickness (tc) below which pseudomorphic growth is obtained. Second, the mechanisms of stress relaxation are elucidated, revealing that misfit dislocations and stacking faults accommodate the strain above tc. Yet, even for films thicker than tc, the atomic monolayers below tc are proved to remain fully coherent. Therefore, multiferroicity may also emerge even in films that appear to be partially relaxed. Last, we demonstrate that fully coherent films with the same thickness present a lower oxygen content for increasing tensile mismatch with the substrate. This behavior proves the coupling between the formation of oxygen vacancies and epitaxial strain, in agreement with first-principles calculations, enabling the strain control of the Mn3+/Mn4+ ratio, which strongly affects the magnetic and electrical properties. However, the presence of oxygen vacancies/Mn3+ cations reduces the effective epitaxial strain in the SrMnO3 films and, thus, the accessibility to the strain-induced multiferroic phase.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An Aluminosilicate Zeolite Containing Rings of Tetrahedral Atoms with All Odd Numbers from Five to Eleven

  • Jo, D.
  • Zhang, Y.
  • Lee, J.H.
  • Mayoral, A.
  • Shin, J.
  • Kang, N.Y.
  • Park, Y.K.
  • Hong, S.B.
Herein we report the synthesis, structure solution, and catalytic properties of PST-31, which has an unprecedented framework topology. This high-silica (Si/Al=16) zeolite was synthesized using a pyrazolium-based dication with a tetramethylene linker as an organic structure-directing agent (OSDA) in hydroxide media. The PST-31 structure is built from new building layers containing four-, five-, six-, and seven-membered rings, which are connected by single four-membered rings in the interlayer region to form a two-dimensional pore system. Its channels consist of [4.56.6.9.11] and [5.6.7.9.10.11] cavities and are thus delimited by nine-, ten-, and eleven-membered rings. The OSDA cations in as-synthesized PST-31 were determined to reside without disorder in the large [42.514.64.72.94] cavities composed of smaller [4.56.6.9.11] and [5.6.7.9.10.11] ones, leading to a symmetry coincidence between the OSDA and the surrounding zeolite cavity. The proton form of PST-31 was found to be selective for the cracking of n-hexane to light olefins.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Docking MOF crystals on graphene support for highly selective electrocatalytic peroxide production

  • Huang, X.
  • Oleynikov, P.
  • He, H.
  • Mayoral, A.
  • Mu, L.
  • Lin, F.
  • Zhang, Y. B.
Tailoring the reaction kinetics is the central theme of designer electrocatalysts, which enables the selective conversion of abundant and inert atmospheric species into useful products. Here we show a supporting effect in tuning the electrocatalytic kinetics of oxygen reduction reaction (ORR) from four-electron to two-electron mechanism by docking metalloporphyrin-based metal-organic frameworks (MOFs) crystals on graphene support, leading to highly selective peroxide production with faradaic efficiency as high as 93.4%. A magic angle of 38.1° tilting for the co-facial alignment was uncovered by electron diffraction tomography, which is attributed to the maximization of π-π interaction for mitigating the lattice and symmetry mismatch between MOF and graphene. The facilitated electron migration and oxygen chemisorption could be ascribed to the supportive effect of graphene that disperses of the electron state of the active center, and ultimately regulates rate-determining step.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimization of YIG/Bi stacks for spin-to-charge conversion and influence of aging

  • Sangiao Barral, Soraya
  • Morales Aragonés, José Ignacio
  • Lucas del Pozo, Irene
  • Jiménez Cavero, Pilar
  • Morellón Alquézar, Luis
  • Sánchez Azqueta, Carlos
  • De Teresa Nogueras, José María
We show that an optimized growth of magnetic layer/non-magnetic layer stacks allows for the improvement of the spin-to-charge conversion efficiency. From the analysis of the voltage signal generated in spin pumping experiments due to the inverse spin Hall effect (ISHE) on Y3Fe5O12 (YIG)/Bi stacks, we have determined values for the spin Hall angle and the spin-diffusion length in Bi of 0.0068(8) and 17.8(9) nm, respectively. Based on these results, we have also studied the influence of aging on the spin-to-charge conversion efficiency by performing spin pumping experiments on YIG/Bi stacks after exposing the samples to ambient conditions for several days and up to 150 days. We have found that in YIG/Bi samples with Bi thicknesses around or below the spin-diffusion length, the ISHE voltage signal is still above 80% of its initial value after 100 days.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Metal-catalyst-free gas-phase synthesis of long-chain hydrocarbons

  • Martínez, L.
  • Merino, P.
  • Santoro, G.
  • Martínez, J. I.
  • Katsanoulis, S.
  • Ault, J.
  • Mayoral, A.
  • Vázquez, L.
  • Accolla, M.
  • Dazzi, A.
  • Mathurin, J.
  • Borondics, F.
  • Blázquez-Blázquez, E.
  • Shauloff, N.
  • Lebrón-Aguilar, R.
  • Quintanilla-López, J. E.
  • Jelinek, R.
  • Cernicharo, J.
  • Stone, H. A.
  • de la Peña O’Shea, V. A.
  • de Andres, P. L.
  • Haller, G.
  • Ellis, G. J.
  • Martín-Gago, J. A.
Development of sustainable processes for hydrocarbons synthesis is a fundamental challenge in chemistry since these are of unquestionable importance for the production of many essential synthetic chemicals, materials and carbon-based fuels. Current industrial processes rely on non-abundant metal catalysts, temperatures of hundreds of Celsius and pressures of tens of bars. We propose an alternative gas phase process under mild reaction conditions using only atomic carbon, molecular hydrogen and an inert carrier gas. We demonstrate that the presence of CH2 and H radicals leads to efficient C-C chain growth, producing micron-length fibres of unbranched alkanes with an average length distribution between C23-C33. Ab-initio calculations uncover a thermodynamically favourable methylene coupling process on the surface of carbonaceous nanoparticles, which is kinematically facilitated by a trap-and-release mechanism of the reactants and nanoparticles that is confirmed by a steady incompressible flow simulation. This work could lead to future alternative sustainable synthetic routes to critical alkane-based chemicals or fuels.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sandwich-type zeolite intergrowths with MFI and the novel extralarge pore IDM-1 as ordered end-members

  • Villaescusa, L. A.
  • Li, Jain.
  • Mayoral, Álvaro
  • Gao, Zihao Rei
  • Camblor, Miguel A.
Stacking faults are two-dimensional planar defects frequently arising in zeolites, modifying their properties and potentially affecting their performance in catalysis and separation applications. In classical zeolite intergrowths, a topologically unique zeolite layer may often pile up after some spatial transformation (lateral translation, rotation, and/or reflection) that may occur in different amounts or directions with about similar probabilities, leading to a difficult to control disorder. Here, we present a new kind of zeolite intergrowth that requires an additional topologically distinct layer rather than a spatial transformation of a unique one. Stacking of the so-called pentasil layers produces the well-known medium pore zeolite MFI. Intercalation in strict alternation of a topologically distinct second layer sandwiched between pentasil layers expands the structure to produce the new extra-large pore IDM-1. Stacking disorder modulates the structural expansion along the stacking direction. The disordered materials have been studied by simulation of the X-ray diffraction patterns using the program DIFFaX and by Cs-corrected high-resolution electron microscopy. We show that disorder does not occur at random but in extended domains and can be controlled all the way from MFI to IDM-1 by just varying the concentration of the synthesis mixture.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Next generation of nanozymes: a perspective of the challenges to match biological performance

  • Goya, G. F.
  • Mayoral, A.
  • Winkler, E.
  • Zysler, R. D.
  • Bagnato, C.
  • Raineri, M.
  • Fuentes-García, J. A.
  • Lima, E.
Nanomaterials with enzyme-like activity have been the spotlight of scientific and technological efforts to substitute natural enzymes, not only in biological research but also for industrial manufacturing, medicine, and environment healing. Notable advancements in this field along the last years relied on to the rational design of single-atom active sites, knowledge of the underlying atomic structure, and realistic abinitio theoretical models of the electronic configuration at the active site. Thus, it is plausible that a next generation of nanozymes still to come will show even improved catalytic efficiency and substrate specificity. However, the dynamic nature of the protein cage surrounding most active sites in biological enzymes adds a flexible functionality that possess a challenge for nanozyme’s mimicking of their natural counterparts. We offer a perspective about where the main strategies to improve nanozymes are headed and identify some of the big challenges faced along the road to better performance. We also outline some of the most exciting bio-inspired ideas that could potentially change this field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optoelectronic properties of atomically thin moxw(1-x)s2 nanoflakes probed by spatially-resolved monochromated EELS

  • Pelaez-Fernandez, M.
  • Lin, Y.-C.
  • Suenaga, K.
  • Arenal, R.
Band gap engineering of atomically thin two-dimensional (2D) materials has attracted a huge amount of interest as a key aspect to the application of these materials in nanooptoelectronics and nanophotonics. Low-loss electron energy loss spectroscopy has been employed to perform a direct measurement of the band gap in atomically thin MoxW(1-x) S2 nanoflakes. The results show a bowing effect with the alloying degree, which fits previous studies focused on excitonic transitions. Additional properties regarding the Van Hove singularities in the density of states of these materials, as well as high energy excitonic transition, have been analysed as well. © 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Direct Imaging and Location of Pb2+ and K+ in EMT Framework-Type Zeolite

  • Zhang, Y.
  • Smith, D.
  • Readman, J. E.
  • Mayoral, A.
The understanding of the structural framework and metal locations within zeolites are two critical aspects to tune and further exploit their properties as heterogeneous catalysts, advanced optical devices, or as water remediation materials. The development of electron microscopy has made it possible to observe directly the zeolitic framework and the distribution of extra framework cations within the pores at the atomic level. Here, we have studied the EMT framework providing data with an unprecedented spatial resolution, which have allowed the analysis of the FAU domains present in the framework. Additionally, potassium and lead (introduced by aqueous ion exchange), which were nonperiodically distributed in the pores have been located. An alternative image mode, annular bright field, has been used, proving its usefulness to extend the spatial resolution and increase the sensitivity toward light elements such as bridging oxygen. Finally, the combination of atomic imaging (local information) with the three-dimensional electron diffraction tomography analysis (averaged information) determined the lead-EMT crystal symmetry to be P63mc.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ruddlesden–Popper hybrid lead bromide perovskite nanosheets of phase pure n=2: Stabilized colloids stored in the solid state

  • Cevallos-Toledo R.B.
  • Rosa-Pardo I.
  • Arenal, R.
  • Oestreicher V.
  • Fickert M.
  • Abellán G.
  • Galian R.E.
  • Pérez-Prieto J.
Ruddlesden-Popper lead halide perovskite (RP-LHP) nano-nanostructures can be regarded as self-assembled quantum wells or superlattices of 3D perovskites with an intrinsic quantum well thickness of a single or a few (n=2-4) lead halide layers; the quantum wells are separated by organic layers. They can be scaled down to a single quantum well dimension. Here, the preparation of highly (photo)chemical and colloidal stable hybrid LHP nanosheets (NSs) of ca. 7.4 µm lateral size and 2.5 nm quantum well height (thereby presenting a deep blue emission at ca. 440 nm), is reported for the first time. The NSs are close-lying and they even interconnect when deposited on a substrate. Their synthesis is based on the use of the p-toluenesulfonic acid/dodecylamine (pTS/DDA) ligand pair and their (photo)chemical stability and photoluminescence is enhanced by adding EuBr2 nanodots (EuNDs). Strikingly, they can be preserved as a solid and stored for at least one year. The blue emissive colloid can be recovered from the solid as needed by simply dispersing the powder in toluene and then using it to prepare solid films, making them very promising candidates for manufacturing devices. © 2021 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Methylammonium lead bromide perovskite nano-crystals grown in a poly[styrene-co-(2-(dimethylamino)ethyl methacrylate)] matrix immobilized on exfoliated graphene nano-sheets

  • Stergiou, A.
  • Sideri, I. K.
  • Kafetzi, M.
  • Ioannou, A.
  • Arenal, R.
  • Mousdis, G.
  • Pispas, S.
  • Tagmatarchis, N.
Development of graphene/perovskite heterostructures mediated by polymeric materials may constitute a robust strategy to resolve the environmental instability of metal halide per-ovskites and provide barrierless charge transport. Herein, a straightforward approach for the growth of perovskite nano-crystals and their electronic communication with graphene is presented. Methylammonium lead bromide (CH3 NH3 PbBr3 ) nano-crystals were grown in a polystyrene-co-(2-(dimethylamino)ethyl methacrylate)], PSt-co-DMAEMA], bi-functional random co-polymer matrix and non-covalently immobilized on graphene. PSt-co-DMAEMA] was selected as a bi-modal polymer capable to stabilize the perovskite nano-crystals via electrostatic interactions between the tri-alkylamine amine sites of the co-polymer and the A-site vacancies of the perovskite and si-multaneously enable Van der Waals attractive interactions between the aromatic arene sites of the co-polymer and the surface of graphene. The newly synthesized CH3 NH3 PbBr3 /co-polymer and graphene/CH3 NH3 PbBr3 /co-polymer ensembles were formed by physical mixing of the components in organic media at room temperature. Complementary characterization by dynamic light scattering, microscopy, and energy-dispersive X-ray spectroscopy revealed the formation of uniform spherical perovskite nano-crystals immobilized on the graphene nano-sheets. Complementary photophysical characterization by UV-Vis absorption, steady-state, and time-resolved fluorescence spectroscopy unveiled the photophysical properties of the CH3 NH3 PbBr3 /co-polymer colloid perovskite solu-tion and verified the electronic communication within the graphene/CH3 NH3 PbBr3 /co-polymer ensembles at the ground and excited states. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Safe extended-range cycling of Li4Ti5O12-based anodes for ultra-high capacity thin-film batteries

  • Siller, V.
  • Gonzalez-Rosillo, J.
  • Nuñez Eroles, M.
  • Stchakovsky, M.
  • Arenal, R.
  • Morata, A.
  • Tarancón, A.
Lithium titanium oxide thin films are increasingly popular anode materials in microbatteries and hybrid supercapacitors, due to their improved safety, cost, and cycle lifetime. So far, research efforts have mainly focused on the pure spinel phase Li4Ti5O12 (LTO) and only a small fraction is dedicated to a broader spectrum of titanium-based metal oxide thin films. In this work, pulsed laser deposition is used in a multilayer approach by alternating LTO and Li2O ablations to create a heterogeneous landscape in the titania-based micro-anodes. This rich microstructure enables the safe extension of the accessible electrochemical window down to 0.2 V. This leads to extraordinary high specific capacities of 250–300 mAh/g at 1 C, maintaining a stable discharge capacity of 180 mAh/g at 16 C. Operando spectroscopic ellipsometry and Raman spectroscopy are used to track optical and structural changes as a function of the discharge voltage down to 0.01 V. A kinetically limited degradation mechanism based on the effective trapping of Li-ions at the octahedral 16c positions is proposed when cycling in the range of 0.2–0.01 V. In essence, our work contributes to titania-based nanoshapes as anodes of increased specific capacity due to a higher Li-site occupation, while maintaining their good stability and safety. © 2022 The Author(s)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Superconducting materials and devices grown by focused ion and electron beam induced deposition

  • Orús, P.
  • Sigloch, F.
  • Sangiao, S.
  • Teresa, J. M. de
Since its discovery in 1911, superconductivity has represented an equally inciting and fascinating field of study in several areas of physics and materials science, ranging from its most fundamental theoretical understanding, to its practical application in different areas of engineering. The fabrication of superconducting materials can be downsized to the nanoscale by means of Focused Ion/Electron Beam Induced Deposition: nanopatterning techniques that make use of a focused beam of ions or electrons to decompose a gaseous precursor in a single step. Overcoming the need to use a resist, these approaches allow for targeted, highly-flexible nanopatterning of nanostructures with lateral resolution in the range of 10 nm to 30 nm. In this review, the fundamentals of these nanofabrication techniques are presented, followed by a literature revision on the published work that makes use of them to grow superconducting materials, the most remarkable of which are based on tungsten, niobium, molybdenum, carbon, and lead. Several examples of the application of these materials to functional devices are presented, related to the superconducting proximity effect, vortex dynamics, electric-field effect, and to the nanofabrication of Josephson junctions and nanoSQUIDs. Owing to the patterning flexibility they offer, both of these techniques represent a powerful and convenient approach towards both fundamental and applied research in superconductivity. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Aberration-corrected transmission electron microscopy with Zernike phase plates

  • Hettler, S.
  • Arenal, R.
We explore the possibility of applying physical phase plates (PPs) in combination with aberration-corrected transmission electron microscopy. Phase-contrast transfer characteristics are calculated and compared for a thin-film based Zernike PP, a hole-free (HF) or Volta PP and an electrostatic Zach PP, considering their phase-shifting properties in combination with partial spatial coherence. The effect of slightly converging illumination conditions, often used in high-resolution applications, on imaging with PPs is discussed. Experiments with an unheated Zernike PP applied to various nanomaterial specimens and a qualitative analysis clearly demonstrates the general compatibility of PPs and aberration-corrected transmission electron microscopy. Calculations and experiments show the benefits of the approach, among which is a strong phase-contrast enhancement of a large range of spatial frequencies. This allows the simultaneous imaging of atomic-resolution structures and morphological features at the nanometer scale, with maximum phase contrast. The calculations can explain why the HFPP damps contrast transfer at higher spatial frequencies. © 2022 The Author(s)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Critical current modulation induced by an electric field in superconducting tungsten-carbon nanowires

  • Orus, P
  • Fomin, VM
  • De Teresa, JM
  • Cordoba, R
The critical current of a superconducting nanostructure can be suppressed by applying an electric field in its vicinity. This phenomenon is investigated throughout the fabrication and electrical characterization of superconducting tungsten-carbon (W-C) nanostructures grown by Ga+ focused ion beam induced deposition (FIBID). In a 45 nm-wide, 2.7 mu m-long W-C nanowire, an increasing side-gate voltage is found to progressively reduce the critical current of the device, down to a full suppression of the superconducting state below its critical temperature. This modulation is accounted for by the squeezing of the superconducting current by the electric field within a theoretical model based on the Ginzburg-Landau theory, in agreement with experimental data. Compared to electron beam lithography or sputtering, the single-step FIBID approach provides with enhanced patterning flexibility and yields nanodevices with figures of merit comparable to those retrieved in other superconducting materials, including Ti, Nb, and Al. Exhibiting a higher critical temperature than most of other superconductors, in which this phenomenon has been observed, as well as a reduced critical value of the gate voltage required to fully suppress superconductivity, W-C deposits are strong candidates for the fabrication of nanodevices based on the electric field-induced superconductivity modulation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic functionalization of scanning probes by focused electron beam induced deposition technology

  • Pablo-Navarro, J.
  • Sangiao, S.
  • Magén, C.
  • Teresa, J.M. de
The fabrication of nanostructures with high resolution and precise control of the deposition site makes Focused Electron Beam Induced Deposition (FEBID) a unique nanolithography process. In the case of magnetic materials, apart from the FEBID potential in standard substrates for multiple applications in data storage and logic, the use of this technology for the growth of nanomagnets on different types of scanning probes opens new paths in magnetic sensing, becoming a benchmark for magnetic functionalization. This work reviews the recent advances in the integration of FEBID magnetic nanostructures onto cantilevers to produce advanced magnetic sensing devices with unprecedented performance. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Direct TEM Observation of Vacancy-Mediated Heteroatom Incorporation into a Zeolite Framework: Towards Microscopic Design of Zeolite Catalysts

  • Li, Junyan
  • Mayoral, Alvaro
  • Kubota, Yoshihiro
  • Inagaki, Satoshi
  • Yu, Jihong
  • Terasaki, Osamu
Incorporating hetero-metal-atom,e.g., titanium, into zeolite frameworks can enhance the catalytic activity and selectivity in oxidation reactions.However,the rational design of zeolites containing titanium at specificsites is difficult because the precise atomic structure during synthesis process remained unclear.Here, a titanosilicate with predictable titanium distribution was synthesized by mediating vacancies in a defective MSE-typezeolite precursor,based on a pre-designed synthetic route including modification of vacancies followed by titanium insertion,where electron microscopy(EM) plays a key role at each step resolving the atomic structure.Point defects including vacancies in the precursor and titanium incorporated into the vacancy-related positions have been directly observed. The results provide insights into the role of point defects in zeolites towards the rational synthesis of zeolites with desired microscopic arrangement of catalytically active sites.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Atomic-level understanding of a formamidinium hybrid halide perovskite, FAPbBr<sub>3</sub>

  • Li, Chengmin
  • Juarez-Perez, Emilio J.
  • Mayoral, Alvaro
Herein, we show how electron microscopy can provide atomic-level understanding of FAPbBr3 , where electron diffraction and high-resolution imaging were combined allowing not only the characterization of the pristine material but also the identification of different intermediates upon its structural disintegration. Additionally, a minor tetragonal phase was also identified whose structure was also solved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Superconducting W-C nanopillars fabricated by Ga+ focused ion beam induced deposition

  • Orús, Pablo
  • Sigloch, Fabian
  • Sangiao, Soraya
  • De Teresa, José María
Ga+ Focused Ion Beam Induced Deposition (FIBID) is a highly flexible, single-step nanopatterning technique that makes use of a focused beam of Ga+ ions to locally induce the decomposition of a gaseous precursor material. In combination with the W(CO)6 precursor, Ga+ FIBID is known to yield a W–C compound that is superconducting below 4.7 ​K. While most reports on Ga+ FIBID-grown W–C focus on in-plane patterning, we demonstrate here that growth along the vertical direction may also be achieved by successively stacking a series of individual patterns that get deposited on top of each other. The nanopillars obtained following this procedure reach up to 10 ​μm in height, and have an aspect ratio of around 50. They exhibit a 68% of metallic W in terms of atomic content, higher than the 40% detected in their in-plane counterparts, while maintaining the superconducting properties. This approach also opens up the possibility of tuning their height and growth angle with respect to the substrate, exhibiting potential applicability in the design of 3D superconducting devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanotubes from Ternary WS2(1- x)Se2 xAlloys: Stoichiometry Modulated Tunable Optical Properties

  • Sreedhara, M. B.
  • Miroshnikov, Yana
  • Zheng, Kai
  • Houben, Lothar
  • Hettler, Simon
  • Arenal, Raul
  • Pinkas, Ido
  • Sinha, Sudarson S.
  • Castelli, Ivano E.
  • Tenne, Reshef
Nanotubes of transition metal dichalcogenides such as WS2 and MoS2 offer unique quasi-1D properties and numerous potential applications. Replacing sulfur by selenium would yield ternary WS2(1-x)Se2x (0 = x = 1; WSSe) nanotubes, which are expected to reveal strong modulation in their absorption edge as a function of selenium content, xSe. Solid WO2.72 oxide nanowhiskers were employed as a sacrificial template to gain a high yield of the nanotubes with a rather uniform size distribution. Though sulfur and selenium belong to the same period, their chemical reactivity with oxide nanowhiskers differed appreciably. Here, the closed ampoule technique was utilized to achieve the completion of the solid-vapor reaction in short time scales instead of the conventional flow reactor method. The structure and chemical composition of the nanotubes were analyzed in detail. X-ray and electron diffractions indicated a systematic modulation of the WSSe lattice upon increasing the selenium content. Detailed chemical mapping showed that the sulfur and selenium atoms are distributed in random positions on the anion lattice site of the nanotubes. The optical excitonic features and absorption edges of the WSSe nanotubes do not vary linearly with the composition xSe, which was further confirmed by density functional theory calculations. The WSSe nanotubes were shown to exhibit strong light-matter interactions forming exciton-polariton quasiparticles, which was corroborated by finite-difference time-domain simulations. Transient absorption analysis permitted following the excited state dynamics and elucidating the mechanism of the strong coupling. Thus, nanotubes of the ternary WSSe alloys offer strong band gap tunability, which would be useful for multispectral vision devices and other optoelectronic applications. © 2022 The Authors. Published by American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin glass state in strained La2/3Ca1/3MnO3 thinfilms

  • Lucas, Irene
  • Marcano, Noelia
  • Prokscha, Thomas
  • Magén, César
  • Corcuera, Rubén
  • Morellón, Luis
  • De Teresa, José M.
  • Ibarra, M. Ricardo
  • Algarabel, Pedro A.
Epitaxial strain modifies the physical properties of thin films deposited on single-crystal substrates. In a previous work, we demonstrated that in the case of La2/3Ca1/3MnO3 thin films the strain induced by the substrate can produce the segregation of a non-ferromagnetic layer (NFL) at the top surface of ferromagnetic epitaxial La2/3Ca1/3MnO3 for a critical value of the tetragonality τ, defined as τ = |c − a|a, of τC ≈ 0.024. Although preliminary analysis suggested its antiferromagnetic nature, to date a complete characterization of the magnetic state of such an NFL has not been performed. Here, we present a comprehensive magnetic characterization of the strain-induced segregated NFL. The field-cooled magnetic hysteresis loops exhibit an exchange bias mechanism below T ≈ 80 K, which is well below the Curie temperature of the ferromagnetic La2/3Ca1/3MnO3 layer. The exchange bias and coercive fields decay exponentially with temperature, which is commonly accepted to describe spin-glass (SG) behavior. The signatures of slow dynamics were confirmed by slow spin relaxation over a wide temperature regime. Low-energy muon spectroscopy experiments directly evidence the slowing down of the magnetic moments below ~100 K in the NFL. The experimental results indicate the SG nature of the NFL. This SG state can be understood within the context of the competing ferromagnetic and antiferromagnetic interactions of similar energies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pyridine vs. Imidazole Axial Ligation on Cobaloxime Grafted Graphene: Hydrogen Evolution Reaction Insights

  • Sideri, Ioanna K.
  • Charalambidis, Georgios
  • Coutsolelos, Athanassios G.
  • Arenal, Raul
  • Tagmatarchis, Nikos
While cobaloximes have been protagonists in the molecular (photo)catalytic hydrogen evolution reaction field, researchers originally shed light on the catalytically active metallic center. However, the specific chemical environment of cobalt, including equatorial and axial ligation, has also a strong impact on the catalytic reaction. In this article, we aim to demonstrate how pyridine vs. imidazole axial ligation of a cobaloxime complex covalently grafted on graphene affects the hydrogen evolution reaction performance in realistic acidic conditions. While pyridine axial ligation mirrors a drastically superior electrocatalytic performance, imidazole exhibits a remarkable long-term stability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

One-step covalent hydrophobic/hydrophilic functionalization of chemically exfoliated molybdenum disulfide nanosheets with RAFT derived polymers

  • Plantzopoulou, Adriana
  • Stergiou, Anastasios
  • Kafetzi, Martha
  • Arenal, Raul
  • Pispas, Stergios
  • Tagmatarchis, Nikos
The covalent functionalization of chemically exfoliated molybdenum disulfide (ce-MoS2) with hydrophobic poly(methyl methacrylate) and hydrophilic poly(acrylic acid) polymers, in a single-step without additives, is presented. The nature of chemical modification and the impact on the structure of ce-MoS2 were spectroscopically investigated. Complexation of Eu3+ was accomplished on grafted polycarboxylate chains on MoS2.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-Throughput Direct Writing of Metallic Micro- and Nano-Structures by Focused Ga+Beam Irradiation of Palladium Acetate Films; 35671475

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Philipp, Patrick
  • Cea, Pilar
  • De Teresa, José María
Metallic nanopatterns are ubiquitous in applications that exploit the electrical conduction at the nanoscale, including interconnects, electrical nanocontacts, and small gaps between metallic pads. These metallic nanopatterns can be designed to show additional physical properties (optical transparency, plasmonic effects, ferromagnetism, superconductivity, heat evacuation, etc.). For these reasons, an intense search for novel lithography methods using uncomplicated processes represents a key on-going issue in the achievement of metallic nanopatterns with high resolution and high throughput. In this contribution, we introduce a simple methodology for the efficient decomposition of Pd3(OAc)6 spin-coated thin films by means of a focused Ga+ beam, which results in metallic-enriched Pd nanostructures. Remarkably, the usage of a charge dose as low as 30 µC/cm2 is sufficient to fabricate structures with a metallic Pd content above 50% (at.) exhibiting low electrical resistivity (70 µ¿·cm). Binary-collision-approximation simulations provide theoretical support to this experimental finding. Such notable behavior is used to provide three proof-of-concept applications: (i) creation of electrical contacts to nanowires, (ii) fabrication of small (40 nm) gaps between large metallic contact pads, and (iii) fabrication of large-area metallic meshes. The impact across several fields of the direct decomposition of spin-coated organometallic films by focused ion beams is discussed. © 2022 The Authors. Published by American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced room-temperature spin-valley coupling in V-doped MoS2

  • Sahoo, Krishna Rani
  • Panda, Janmey Jay
  • Bawari, Sumit
  • Sharma, Rahul
  • Maity, Dipak
  • Lal, Ashique
  • Arenal, Raul
  • Rajalaksmi, G.
  • Narayanan, Tharangattu N.
Achieving room-temperature valley polarization in two-dimensional (2D) atomic layers (2D materials) by substitutional doping opens new avenues of applications. Here, monolayer MoS2, when doped with vanadium at low (0.1 atomic %) concentrations, is shown to exhibit high spin-valley coupling, and hence a high degree of valley polarization at room-temperature. The atomic layers of MoS2 (MS) and V-doped MoS2 (VMS) are grown via the chemical vapor deposition-assisted method. The formation of new energy states near the valence band is confirmed from band gap calculations and also from the density functional theory–based band structure analyses. Time-reversal symmetry broken energy shift in the equivalent valleys is predicted in VMS, and the room-temperature chirality-controlled photoluminescent (PL) excitation measurements indicate such a shift in valley exciton energies (∼35 meV). An enhanced valley polarization in VMS (∼42%) is observed in comparison to that in MS (<12%), while in MS, the chirality-controlled excitations did not show the difference in emission energies. Spin Hall effect of light–based optical rotation measurements indicate the asymmetric absorption among the two different chiralities of the incident light, hence supporting the existence of room-temperature valley polarization. This study opens possibilities of room-temperature opto-spintronics using stable 2D materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Direct-write of tungsten-carbide nanoSQUIDs based on focused ion beam induced deposition

  • Sigloch, Fabian
  • Sangiao, Soraya
  • Orús, Pablo
  • de Teresa, José M.
NanoSQUIDs are quantum sensors that excel in detecting a small change in magnetic flux with high sensitivity and high spatial resolution. Here, we employ resist-free direct-write Ga+ Focused Ion Beam Induced Deposition (FIBID) techniques to grow W–C nanoSQUIDs, and we investigate their electrical response to changes in the magnetic flux. Remarkably, FIBID allows the fast (3 min) growth of 700 nm × 300 nm nanoSQUIDs based on narrow nanobridges (50 nm wide) that act as Josephson junctions. Albeit the SQUIDs exhibit a comparatively low modulation depth and obtain a high inductance, the observed transfer coefficient (output voltage to magnetic flux change) is comparable to other SQUIDs (up to 1300 μV/Φ0), which correlates with the high resistivity of W–C in the normal state. We discuss here the potential of this approach to reduce the active area of the nanoSQUIDs to gain spatial resolution as well as their integration on cantilevers for scanning-SQUID applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Low-resistivity, high-resolution W-C electrical contacts fabricated by direct-write focused electron beam induced deposition

  • Orús, Pablo
  • Sigloch, Fabian
  • Sangiao, Soraya
  • De Teresa, José María
Background: The use of a focused ion beam to decompose a precursor gas and produce a metallic deposit is a widespread nanolithographic technique named focused ion beam induced deposition (FIBID). However, such an approach is unsuitable if the sample under study is sensitive to the somewhat aggressive exposure to the ion beam, which induces the effects of surface amorphization, local milling, and ion implantation, among others. An alternative strategy is that of focused electron beam induced deposition (FEBID), which makes use of a focused electron beam instead, and in general yields deposits with much lower metallic content than their FIBID counterparts. Methods: In this work, we optimize the deposition of tungsten-carbon (W-C) nanowires by FEBID to be used as electrical contacts by assessing the impact of the deposition parameters during growth, evaluating their chemical composition, and investigating their electrical response. Results: Under the optimized irradiation conditions, the samples exhibit a metallic content high enough for them to be utilized for this purpose, showing a room-temperature resistivity of 550 μΩ cm and maintaining their conducting properties down to 2 K. The lateral resolution of such FEBID W-C metallic nanowires is 45 nm. Conclusions: The presented optimized procedure may prove a valuable tool for the fabrication of contacts on samples where the FIBID approach is not advised
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanoengineering palladium plasmonic nanosheets inside polymer nanospheres for photothermal therapy and targeted drug delivery

  • Uson, L.
  • Yus, C.
  • Mendoza, G.
  • Leroy, E.
  • Irusta, S.
  • Alejo, T.
  • García-Domingo, D.
  • Larrea, A.
  • Arruebo, M.
  • Arenal, R.
  • Sebastián, V.
The incorporation of plasmonic nanoconstructs in biodegradable polymeric nanoparticles (NPs), together with therapeutic drugs in a controlled procedure is of interest for different applications in Nanomedicine. Advanced hybrid nanomaterials can be engineered by combining the in situ formation of plasmonic palladium nanosheets (NSs) and the proper ionic nature of the encapsulated drug. This study presents a new procedure to synthesize hybrid nanostructures by a Pickering double emulsion. Anisotropic palladium (Pd) NSs with unique near-infrared (NIR)-optical properties can be assembled within a poly lactic-co-glycolic acid matrix of < 200 nm NPs, when Pd precursors are in situ reduced via a gas-phase procedure. The hybrid nanomaterials respond to external NIR light stimulus. The unprecedented precision to assemble, in a single stage, plasmonic nanoconstructs having a total loading selectivity, when encapsulated in combination with hydrophobic drugs, offers new opportunities in the new class of theragnostics, in particular when triggered drug delivery and photothermal therapies are required.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Publisher’s Note: “Next generation of nanozymes: A perspective of the challenges to match biological performance” [J. Appl. Phys. 130, 190903 (2021)]

  • Goya, G. F.
  • Mayoral, A.
  • Winkler, E.
  • Zysler, R. D.
  • Bagnato, C.
  • Raineri, M.
  • Fuentes García, J. A.
  • Lima, E.
Nanomaterials with enzyme-like activity have been the spotlight of scientific and technological efforts to substitute natural enzymes, not only in biological research but also for industrial manufacturing, medicine, and environment healing. Notable advancements in this field along the last years relied on to the rational design of single-atom active sites, knowledge of the underlying atomic structure, and realistic ab initio theoretical models of the electronic configuration at the active site. Thus, it is plausible that a next generation of nanozymes still to come will show even improved catalytic efficiency and substrate specificity. However, the dynamic nature of the protein cage surrounding most active sites in biological enzymes adds a flexible functionality that possess a challenge for nanozyme's mimicking of their natural counterparts. We offer a perspective about where the main strategies to improve nanozymes are headed and identify some of the big challenges faced along the road to better performance. We also outline some of the most exciting bio-inspired ideas that could potentially change this field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Rhodium single-atom catalyst design through oxide support modulation for selective gas-phase ethylene hydroformylation

  • Farpón, Marcos G.
  • Henao, Wilson
  • Plessow, Philipp N.
  • Andrés, Eva
  • Arenal, Raúl
  • Marini, Carlo
  • Agostini, Giovanni
  • Studt, Félix
  • Prieto, Gonzalo
A frontier challenge in single-atom (SA) catalysis is the design of fully inorganic sites capable of emulating the high reaction selectivity traditionally exclusive of organometallic counterparts in homogeneous catalysis. Modulating the direct coordination environment in SA sites, via the exploitation of the oxide support's surface chemistry, stands as a powerful albeit underexplored strategy. We report that isolated Rh atoms stabilized on oxygen-defective SnO2 uniquely unite excellent TOF with essentially full selectivity in the gas-phase hydroformylation of ethylene, inhibiting the thermodynamically favored olefin hydrogenation. Density Functional Theory calculations and surface characterization suggest that substantial depletion of the catalyst surface in lattice oxygen, energetically facile on SnO2, is key to unlock a high coordination pliability at the mononuclear Rh centers, leading to an exceptional performance which is on par with that of molecular catalysts in liquid media.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tungsten oxide mediated quasi-van der Waals Epitaxy of WS2 on Sapphire

  • Cohen, Assael
  • Mohapatra, Pranab K.
  • Hettler, Simon
  • Patsha, Avinash
  • Narayanachari, K. V. L. V.
  • Shekhter, Pini
  • Cavin, John
  • Rondinelli, James M.
  • Bedzyk, Michael
  • Dieguez, Oswaldo
  • Arenal, Raul
  • Ismach, Ariel
Conventional epitaxy plays a crucial role in current state-of-the art semiconductor technology, as it provides a path for accurate control at the atomic scale of thin films and nanostructures, to be used as the building blocks in nanoelectronics, optoelectronics, sensors, etc. Four decades ago, the terms “van der Waals” (vdW) and “quasi-vdW (Q-vdW) epitaxy” were coined to explain the oriented growth of vdW layers on 2D and 3D substrates, respectively. The major difference with conventional epitaxy is the weaker interaction between the epi-layer and the epi-substrates. Indeed, research on Q-vdW epitaxial growth of transition metal dichalcogenides (TMDCs) has been intense, with oriented growth of atomically thin semiconductors on sapphire being one of the most studied systems. Nonetheless, there are some striking and not yet understood differences in the literature regarding the orientation registry between the epi-layers and epi-substrate and the interface chemistry. Here we study the growth of WS2 via a sequential exposure of the metal and the chalcogen precursors in a metal–organic chemical vapor deposition (MOCVD) system, introducing a metal-seeding step prior to the growth. The ability to control the delivery of the precursor made it possible to study the formation of a continuous and apparently ordered WO3 mono- or few-layer at the surface of a c-plane sapphire. Such an interfacial layer is shown to strongly influence the subsequent quasi-vdW epitaxial growth of the atomically thin semiconductor layers on sapphire. Hence, here we elucidate an epitaxial growth mechanism and demonstrate the robustness of the metal-seeding approach for the oriented formation of other TMDC layers. This work may enable the rational design of vdW and quasi-vdW epitaxial growth on different material systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gold clusters immobilized by post-synthesis methods on thiol-containing SBA-15 mesoporous materials for the aerobic oxidation of cyclohexene: influence of light and hydroperoxide

  • Delgado, Rafael
  • Márquez-Álvarez, Carlos
  • Mayoral, Álvaro
  • de la Serna, Ramón
  • Agúndez, Javier
  • Pérez-Pariente, Joaquín
Gold nanospecies produced by a historically inspired two-liquid phase system were immobilized on plate-like mesoporous silica, SBA-15, functionalized with mercaptopropyl groups by a post-synthesis method, and the resulting materials were tested in the oxidation of cyclohexene with molecular oxygen at atmospheric pressure. The main purpose of this approach was to compare the physicochemical properties and catalytic performance of these materials with those of previously reported related materials functionalized by in situ methods during synthesis. In addition, catalytic tests under ambient lighting and darkness and also in the presence and absence of the initiator tert-butyl hydroperoxide (TBHP) were carried out. The samples were characterized by chemical analysis, N2 adsorption/desorption, TGA, SEM, HRTEM, UV-vis spectroscopy and XPS. Gold nanoclusters and isolated gold atoms but no AuNPs were found in the catalysts (0.31–2.69 wt.% of gold). The XPS shows that nearly 60% of the -SH groups (1.33 wt.% of S) were oxidized to sulphonic groups upon gold immobilization. The AuNCs and isolated gold atoms evolved in the the reaction medium to form AuNPs. The activity of the samples was lower than that of the catalysts supported on related S-bearing SBA-15 functionalized in situ, which was attributed to their different Au/S ratios, which in turn regulated the evolutionary process of the gold species during the reaction. The catalysts turned out to be inactive in darkness, which evidences that the cyclohexene oxidation carried out at ambient illumination is actually photocatalyzed by the AuNPs formed in situ during the reaction. The TBHP initiator is required to obtain the activity in order to counteract the inhibitors of cyclohexene auto-oxidation present in the commercial reagent. On the other hand, no major differences in the selectivity among the different catalysts and reactions were observed, with 2-cyclohexen-1-one and 2-cyclohexen-1-ol resulting from the allylic oxidation as main products (selectivity of (one + ol) ~80% at a conversion ≥ 35%; one/ol~2).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Asymmetrical plasmon distribution in hybrid AuAg hollow/solid coded nanotubes

  • Genç, Aziz
  • Patarroyo, Javier
  • Sancho-Parramon, Jordi
  • Arenal, Raul
  • Bastús, Neus G.
  • Puntes, Victor
  • Arbiol, Jordi
Morphological control at the nanoscale paves the way to fabricate nanostructures with desired plasmonic properties. In this study, we discuss the nanoengineering of plasmon resonances in 1D hollow nanostructures of two different AuAg nanotubes, including completely hollow nanotubes and hybrid nanotubes with solid Ag and hollow AuAg segments. Spatially resolved plasmon mapping by electron energy loss spectroscopy (EELS) revealed the presence of high order resonator-like modes and localized surface plasmon resonance (LSPR) modes in both nanotubes. The experimental findings accurately correlated with the boundary element method (BEM) simulations. Both experiments and simulations revealed that the plasmon resonances are intensely present inside the nanotubes due to plasmon hybridization. Based on the experimental and simulated results, we show that the novel hybrid AuAg nanotubes possess two significant coexisting features: (i) LSPRs are distinctively generated from the hollow and solid parts of the hybrid AuAg nanotube, which creates a way to control a broad range of plasmon resonances with one single nanostructure, and (ii) the periodicity of the high-order modes are disrupted due to the plasmon hybridization by the interaction of solid and hollow parts, resulting in an asymmetrical plasmon distribution in 1D nanostructures. The asymmetry could be modulated/engineered to control the coded plasmonic nanotubes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Long-term performance of magnetic force microscopy tips grown by focused electron beam induced deposition

  • Escalante-Quiceno, Alix Tatiana
  • Novotný, Ondrej
  • Neuman, Jan
  • Magén, César
  • De Teresa, José María
High-resolution micro- and nanostructures can be grown using Focused Electron Beam Induced Deposition (FEBID), a direct-write, resist-free nanolithography technology which allows additive patterning, typically with sub-100 nm lateral resolution, and down to 10 nm in optimal conditions. This technique has been used to grow magnetic tips for use in Magnetic Force Microscopy (MFM). Due to their high aspect ratio and good magnetic behavior, these FEBID magnetic tips provide several advantages over commercial magnetic tips when used for simultaneous topographical and magnetic measurements. Here, we report a study of the durability of these excellent candidates for high-resolution MFM measurements. A batch of FEBID-grown magnetic tips was subjected to a systematic analysis of MFM magnetic contrast for 30 weeks, using magnetic storage tape as a test specimen. Our results indicate that these FEBID magnetic tips operate effectively over a long period of time. The magnetic signal was well preserved, with a maximum reduction of 60% after 21 weeks of recurrent use. No significant contrast degradation was observed after 30 weeks in storage.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanoscale direct-write fabrication of superconducting devices for application in quantum technologies

  • De Teresa, José María
In this Perspective article, we evaluate the current state of research on the use of focused electron and ion beams to directly fabricate nanoscale superconducting devices with application in quantum technologies. First, the article introduces the main superconducting devices and their fabrication by means of standard lithography techniques such as optical lithography and electron beam lithography. Then, focused ion beam patterning of superconductors through milling or irradiation is shown, as well as the growth of superconducting devices by means of focused electron and ion beam induced deposition. We suggest that the key benefits of these resist-free direct-growth techniques for quantum technologies include the ability to make electrical nanocontacts and circuit edit, fabrication of high-resolution superconducting resonators, creation of Josephson junctions and superconducting quantum interference device (SQUIDs) for on-tip sensors, patterning of high-Tc SQUIDs and other superconducting circuits, and the exploration of fluxtronics and topological superconductivity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Can NbO Keep nbo Topology under Electrons? –Unveiling Novel Aspects of Niobium Monoxide at the Atomic Scale

  • Li, Chengmin
  • Li, Junyan
  • Zhou, Yi
  • Zhang, Qing
  • Mayoral, Alvaro
  • Li, Gang
  • Terasaki, Osamu
A precise investigation of NbO has been carried out by advanced electron microscopy combined with powder and single crystal X-ray diffraction (XRD). The structure of pristine NbO has been determined as Pm-3 m space group (SG) with a = 4.211 Å and the positions of Nb and O at the 3c and 3d Wyckoff positions, respectively, which is consistent with previous report based on powder XRD data. Electron beams induced a structural transition, which was investigated and explained by combining electron diffraction and atomic-resolution imaging. The results revealed that the electron beam stimulated both Nb and O atom-migrations within each fcc sublattice, and that the final structure was SG Fm-3 m with a = 4.29 Å, Nb and O at the 4a and 4b with 75 % occupancy and same chemical composition. Antiphase planar defects were discovered in the pristine NbO and related to the structural transformation. Theoretical calculations performed by density functional theory (DFT) supported the experimental conclusions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improved O2-assisted styrene synthesis by double-function purification of SWCNT catalyst

  • Mercadal, Juan J.
  • Mayoral, Alvaro
  • Fierro, José Luis G.
  • García-Bordejé, Enrique
  • Melián-Cabrera, Ignacio
The catalytic performance of SWCNT was notably improved in the oxidative dehydrogenation of ethylbenzene (EB) to styrene (ST) upon a double-function purification in one step of the raw SWCNT. This consists of lowering the MeOx concentration and generating surface C=O groups after processing it in nitric acid at controlled conditions, while preserving the structure. The textural improvement was ascribed to the cutting of the tubes/bundles by oxidation and to MeOx removal itself (dilution effect). Both EB conversion and ST selectivity increased with a parallel lowering of the undesired COx selectivity. The conversion was interpreted by the enhancement of the intrinsic properties (i.e., more surface ketonic groups) but also to the higher load of SWCNT in the bed upon purification; both factors contribute to a higher number of active sites (C=O) in the bed for styrene formation. The most purified catalyst underperformed in conversion once the purification altered the SWCNT structure notably. Thus, preserving the structure is an important condition to achieve high conversion and yield. The better selectivity was explained in two ways; more styrene-forming sites (C=O) or less COx-forming sites (uncoated MeOx) in the bed, or both. The styrene yield per catalyst volume was improved by an average of ca. 240 % in comparison to the non-purified SWCNT. Deactivation is critical in maximizing the purification effect on the intrinsic and volumetric yields. In practical terms, the purification method proved to enhance the reaction; the selectivity towards the unwanted COx was significantly lowered with a gain towards styrene, achieving comparable selectivity values as in the conventional process, but operated at much lower temperature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On-chip monitoring of toxic gases: capture and label-free SERS detection with plasmonic mesoporous sorbents

  • Lafuente, Marta
  • Almazán, Fernando
  • Bernad, Eduardo
  • Florea, Ileana
  • Arenal, Raul
  • Urbiztondo, Miguel A.
  • Mallada, Reyes
  • Pina, Maria P.
AThe detection of the spread of toxic gas molecules in the air at low concentration in the field requires a robust miniaturized system combined with an analytical technique that is portable and able to detect and identify the molecules, as is the case with surface enhanced Raman scattering (SERS). This work aims to address capability gaps faced by first responders in real-time detection, identification and monitoring of neurotoxic gases by developing robust, reliable and reusable SERS microfluidic chips. Thus, the key performance attributes of a portable SERS detection system that must be addressed in detail are its limit of detection, response time and reusability. To this purpose, we integrate a 3D plasmonic architecture based on closely packed mesoporous silica (MCM48) nanospheres decorated with Au nanoparticle arrays, denoted as MCM48@Au, into a Si microfluidic chip designed and used for preconcentration and label-free detection of gases at a trace concentration level. The SERS performance of the plasmonic platform is thoroughly analyzed using DMMP as a model neurotoxic simulant over a 1 cm2 SERS active area and over a range of concentrations from 100 ppbV to 2.5 ppmV. The preconcentration-based SERS signal amplification by the mesoporous silica moieties is evaluated against dense silica counterparts, denoted as Stöber@Au. To assess the potential for applications in the field, the microfluidic SERS chip has been interrogated with a portable Raman spectrometer, evaluated with temporal and spatial resolution and subjected to several gas detection/regeneration cycles. The reusable SERS chip shows exceptional performance for the label-free monitoring of 2.5 ppmV gaseous DMMP.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Core–shell Fe3O4@CoFe2O4 nanoparticles as high-performance anode catalysts for enhanced oxygen evolution reaction

  • Royer, Lisa
  • Makarchuk, Iryna
  • Hettler, Simon
  • Arenal, Raúl
  • Asset, Tristan
  • Rotonnelli, Benjamin
  • Bonnefont, Antoine
  • Savinova, Elena
  • Pichon, Benoit P.
Water electrolysis is a promising and environmentally friendly means for renewable energy storage. Recent progress in the development of anion exchange membranes (AEMs) has provided new perspectives for high-performance anode catalysts based on transition metal oxides (TMOs) for the sluggish anodic oxygen evolution reaction (OER). Here, we report on core–shell nanoparticles (Fe3O4@CoFe2O4) which allow combining an electrocatalytic shell (CoFe2O4) with a conductive core (Fe3O4). Such an original approach significantly minimizes critical Co content in the catalyst and avoids addition of unstable conductive carbon black. The core–shell nanoparticles outperform Co(1−x)Fe(2+x)O4 nanoparticles and show an exceptional OER activity per Co unit mass (2800 A gcobalt−1 at 1.65 V vs. RHE) suggesting synergistic interaction between the core and the shell. Along with the core–shell structure, the size of the Fe3O4 core is a critical parameter, with a large conductive Fe3O4 core being beneficial for OER enhancement.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Role of strontium cations in ZSM-5 zeolite in the methanol-to-hydrocarbons reaction

  • Liutkova, A.
  • Drozhzhin, V.
  • Heinrichs, J. M. J. J.
  • Jestl, V.
  • Evtushkova, A.
  • Mezari, B.
  • Mayoral, Á.
  • Kosinov, N.
  • Hensen, E. J. M.
The selectivity of the methanol-to-hydrocarbons (MTH) reaction can be tuned by modifying zeolite catalysts with alkaline earth metals, which typically increase propylene selectivity and catalyst stability. Here we employed Sr2+ as its higher atomic number in comparison to the zeolite T atoms facilitates characterization by scanning transmission electron microscopy and operando X-ray absorption spectroscopy. Sr2+ dispersed in the ZSM-5 micropores coordinates water, methanol, and dimethyl ether during the MTH reaction. Complementary characterization with nuclear magnetic resonance spectroscopy, thermogravimetric analysis combined with mass spectrometry, operando infrared spectroscopy, and X-ray diffraction points to the retention of substantially more adsorbates during the MTH reaction in comparison to Sr-free zeolites. Our findings support the notion that alkaline earth metals modify the porous reaction environment such that the olefin cycle is favored over the aromatic cycle in the MTH, explaining the increased propylene yield and lower deactivation rate.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Exotic Electronic Properties of 2D Nanosheets Isolated from Liquid Phase Exfoliated Phyllosilicate Minerals

  • Wei, Cencen
  • Roy, Abhijit
  • Tripathi, Manoj
  • Aljarid, Adel K.A.
  • Salvage, Jonathan P.
  • Roe, S. Mark
  • Arenal, Raul
  • Boland, Conor S.
Spectrally inactive, electrically insulating, and chemically inert are adjectives broadly used to describe phyllosilicate minerals like mica and chlorite. Here, the above is disproved by demonstrating aqueous suspensions of liquid exfoliated nanosheets from five bulk mica types and chlorite schist. Nanosheet quality is confirmed via transmission electron and X‐ray photoelectron spectroscopies, as well as electron diffraction. Through Raman spectroscopy, a previously unreported size‐ and layer‐dependent spectral fingerprint is observed. When analyzing the high‐yield suspensions (≈1 mg mL−1) through UV–vis spectroscopy, all phyllosilicates present bandgap (Eg) narrowing from ≈7 eV in the bulk to ≈4 eV for monolayers. Unusually, the bandgap is inversely proportional to the areal size (A) of the nanosheets, measured via atomic force microscopy. Due to an unrecorded quantum confinement effect, nanosheet electronic properties scale toward semiconducting behavior (bandgap ≈3 eV) as nanosheet area increases. Furthermore, modeling X‐ray diffraction spectra shows that the root cause of the initial bandgap narrowing is lattice relaxation. Finally, with their broad range of isomorphically substituted ions, phyllosilicate nanosheets show remarkable catalytic properties for hydrogen production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strontium-deficient SrxCoO2-CoO2 nanotubes as a high ampacity and high conductivity material

  • Roy, Kankona Singha
  • Hettler, Simon
  • Arenal, Raul
  • Panchakarla, Leela S.
Continuous miniaturization of electronics demands the development of interconnectors with high ampacity and high conductivity, which conventional conductors such as copper and gold cannot offer. Here we report the synthesis of Sr-deficient misfit SrxCoO2-CoO2 nanotubes by a novel crystal conversion method and investigate their electrical properties. Bulk Sr6Co5O15 having a quasi-one-dimensional CoO6 polyhedral structure (face-sharing octahedron and trigonal prismatic CoO6 arranged in one-dimension) is converted to SrxCoO2-CoO2 nanotubes where CoO2 adopts a two-dimensional edge-sharing CoO2 layered structure in a basic hydrothermal process. Electrical properties measured on individual nanotubes demonstrate that these nanotubes are semiconducting with a conductivity of 1.28 x 10(4) S cm(-1) and an ampacity of 10(9) A cm(-2), which is the highest reported ampacity value to date of any inorganic oxide-based material. The nanotubes also show a breakdown power per unit channel length (P/L) of similar to 38.3 W cm(-1), the highest among the regularly used interconnect materials. The above results demonstrate that SrxCoO2-CoO2 nanotubes are potential building blocks for high-power electronic applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unsupervised learning for the segmentation of small crystalline particles at the atomic level

  • Bárcena-González, Guillermo
  • Hernández-Robles, Andrei
  • Mayoral, Álvaro
  • Martinez, Lidia
  • Huttel, Yves
  • Galindo, Pedro L.
  • Ponce, Arturo
Electron backscattering diffraction provides the analysis of crystalline phases at large scales (microns) while precession electron diffraction may be used to get 4D-STEM data to elucidate structure at nanometric resolution. Both are limited by the probe size and also exhibit some difficulties for the generation of large datasets, given the inherent complexity of image acquisition. The latter appoints the application of advanced machine learning techniques, such as deep learning adapted for several tasks, including pattern matching, image segmentation, etc. This research aims to show how Gabor filters provide an appropriate feature extraction technique for electron microscopy images that could prevent the need of large volumes of data to train deep learning models. The work presented herein combines an algorithm based on Gabor filters for feature extraction and an unsupervised learning method to perform particle segmentation of polyhedral metallic nanoparticles and crystal orientation mapping at atomic scale. Experimental results have shown that Gabor filters are convenient for electron microscopy images analysis, that even a nonsupervised learning algorithm can provide remarkable results in crystal segmentation of individual nanoparticles. This approach enables its application to dynamic analysis of particle transformation recorded with aberration-corrected microscopy, offering new possibilities of analysis at nanometric scale.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw, Fatou
  • Furgeaud, Clarisse
  • Arenal, Raúl
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juarez-Perez, Emilio J.
Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Detecting the spin-polarization of edge states in graphene nanoribbons

  • Brede, Jens
  • Merino-Díez, Nestor
  • Berdonces-Layunta, Alejandro
  • Sanz, Sofía
  • Domínguez-Celorrio, Amelia
  • Lobo-Checa, Jorge
  • Vilas-Varela, Manuel
  • Peña, Diego
  • Frederiksen, Thomas
  • Pascual, José I.
  • Oteyza, Dimas G. de
  • Serrate, David
Low dimensional carbon-based materials can show intrinsic magnetism associated to p-electrons in open-shell π-conjugated systems. Chemical design provides atomically precise control of the π-electron cloud, which makes them promising for nanoscale magnetic devices. However, direct verification of their spatially resolved spin-moment remains elusive. Here, we report the spin-polarization of chiral graphene nanoribbons (one-dimensional strips of graphene with alternating zig-zag and arm-chair boundaries), obtained by means of spin-polarized scanning tunnelling microscopy. We extract the energy-dependent spin-moment distribution of spatially extended edge states with π-orbital character, thus beyond localized magnetic moments at radical or defective carbon sites. Guided by mean-field Hubbard calculations, we demonstrate that electron correlations are responsible for the spin-splitting of the electronic structure. Our versatile platform utilizes a ferromagnetic substrate that stabilizes the organic magnetic moments against thermal and quantum fluctuations, while being fully compatible with on-surface synthesis of the rapidly growing class of nanographenes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tailored design of a water-based nanoreactor technology for producing processable Sub-40 Nm 3D COF nanoparticles at atmospheric conditions

  • Llauradó-Capdevila, Gemma
  • Veciana, Andrea
  • Guarducci, María Aurora
  • Mayoral, Álvaro
  • Pons, Ramon
  • Hertle, Lukas
  • Ye, Hao
  • Mao, Minmin
  • Sevim, Semih
  • Rodríguez-San-Miguel, David
  • Sorrenti, Alessandro
  • Jang, Bumjin
  • Wang, Zuobin
  • Chen, Xiang-Zhong
  • Nelson, Bradley J.
  • Matheu, Roc
  • Franco, Carlos
  • Pané, Salvador
  • Puigmartí-Luis, Josep
Covalent organic frameworks (COFs) are crystalline materials with intrinsic porosity that offer a wide range of potential applications spanning diverse fields. Yet, the main goal in the COF research area is to achieve the most stable thermodynamic product while simultaneously targeting the desired size and structure crucial for enabling specific functions. While significant progress is made in the synthesis and processing of 2D COFs, the development of processable 3D COF nanocrystals remains challenging. Here, a water‐based nanoreactor technology for producing processable sub‐40 nm 3D COF nanoparticles at ambient conditions is presented. Significantly, this technology not only improves the processability of the synthesized 3D COF, but also unveils exciting possibilities for their utilization in previously unexplored domains, such as nano/microrobotics and biomedicine, which are limited by larger crystallites.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Cryo-focused ion beam-induced deposition of tungsten–carbon nanostructures using a thermoelectric plate

  • Orús, P.
  • Sigloch, F.
  • Sangiao, S.
  • Teresa Nogueras, J.M. de
Focused Ion Beam-Induced Deposition (FIBID) is a single-step nanopatterning technique that applies a focused beam of ions to induce the decomposition of a gaseous precursor. The processing rate of FIBID increases by two orders of magnitude when the process is performed at cryogenic temperatures (Cryo-FIBID): the precursor forms a condensed layer on the surface of the cooled substrate, greatly enhancing the amount of material available for decomposition. Cryo-FIBID has been achieved so far by making use of liquid nitrogen-based cooling circuits, which require the passage of a flowing gas as a cooling agent. Here, the Cryo-FIBID of the W(CO)6 precursor is performed using a coolant-free thermoelectric plate utilizing the Peltier effect. Performed at-60 ºC, the procedure yields a W–C-based material with structural and electrical properties comparable to those of its counterpart grown in coolant-based Cryo-FIBID. The use of the thermoelectric plate significantly reduces the vibrations and sample drift induced by the flow of passing coolant gas and allows for the fabrication of similar nanostructures. In summary, the reported process represents a further step towards the practical implementation of the Cryo-FIBID technique, and it will facilitate its use by a broader research community. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the surface area per volumetric loading: Its pronounced improvement in densely-packed SWCNT by double-function purification

  • Melián-Cabrera, Ignacio
  • Mercadal, Juan J.
  • Mayoral, Alvaro
  • Fierro, José Luis G.
Volumetric loading is often a critical parameter in process design rather than weight. In this work, we have assessed the volumetric textural parameters of purified single-walled carbon nanotube materials (SWCNT). Purification is a necessary step in the SWCNT manufacturing process as they contain a metal residue inherent to their synthesis. Nitric acid treatment was applied for both metal removal and carbon structural/textural modification. Results show that the volumetric BET area is enhanced in ca. 500% with respect to the non-purified SWCNT (ca. 160% per mass), where both volumetric microporosity and external surfaces are enhanced. For such optimal material, the SWCNT structure remains well-defined though changes are observed (densification, more interstitial space, cutting of the tubes and amorphous carbon being formed). Three intrinsic factors contribute to the volumetric BET's enhancement: the bulk density and the mass-based surface parameters; microporous and external surfaces. The bulk density is enhanced due to a structural densification, thus more carbon is available per volume despite heavier metals (Ni, Y) being removed. One indirect factor, the MOx-removal effect, affects both intrinsic surface parameters. After studying this effect in depth, it was found that the microporosity is truly and largely enhanced due to newly-formed interstitial space. The external surface area is slightly improved but to a much lesser extent than microporosity. Overall, the factors dominating the volumetric BET for our system and applied experimental conditions are the bulk density, microporosity and MOx-removal effect. Concerning the conventional mass-based BET, microporosity and MOx-removal effect are the dominating factors. The study also reveals that mesoporosity control in these materials is possible, in comparison to previous studies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ferromagnetism on an atom-thick & extended 2D metal-organic coordination network

  • Lobo-Checa, Jorge
  • Hernández-López, Leyre
  • Otrokov, Mikhail M.
  • Piquero-Zulaica, Ignacio
  • Candia, Adriana E.
  • Gargiani, Pierluigi
  • Serrate, David
  • Delgado, Fernando
  • Valvidares, Manuel
  • Cerdá, Jorge
  • Arnau, Andrés
  • Bartolomé, Fernando
Ferromagnetism is the collective alignment of atomic spins that retain a net magnetic moment below the Curie temperature, even in the absence of external magnetic fields. Reducing this fundamental property into strictly two-dimensions was proposed in metal-organic coordination networks, but thus far has eluded experimental realization. In this work, we demonstrate that extended, cooperative ferromagnetism is feasible in an atomically thin two-dimensional metal-organic coordination network, despite only ≈ 5% of the monolayer being composed of Fe atoms. The resulting ferromagnetic state exhibits an out-of-plane easy-axis square-like hysteresis loop with large coercive fields over 2 Tesla, significant magnetic anisotropy, and persists up to TC ≈ 35 K. These properties are driven by exchange interactions mainly mediated by the molecular linkers. Our findings resolve a two decade search for ferromagnetism in two-dimensional metal-organic coordination networks.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interchain-expanded extra-large-pore zeolites

  • Gao, Zihao Rei
  • Yu, Huajian
  • Chen, Fei-Jian
  • Mayoral, Álvaro
  • Niu, Zijian
  • Niu, Ziwen
  • Li, Xintong
  • Deng, Hua
  • Márquez-Álvarez, Carlos
  • He, Hong
  • Xu, Shutao
  • Zhou, Yida
  • Xu, Jun
  • Xu, Hao
  • Fan, Wei
  • Balestra, Salvador R. G.
  • Ma, Chao
  • Hao, Jiazheng
  • Li, Jian
  • Wu, Peng
  • Yu, Jihong
  • Camblor, Miguel A.
Stable aluminosilicate zeolites with extra-large pores that are open through rings of more than 12 tetrahedra could be used to process molecules larger than those currently manageable in zeolite materials. However, until very recently1,2,3, they proved elusive. In analogy to the interlayer expansion of layered zeolite precursors4,5, we report a strategy that yields thermally and hydrothermally stable silicates by expansion of a one-dimensional silicate chain with an intercalated silylating agent that separates and connects the chains. As a result, zeolites with extra-large pores delimited by 20, 16 and 16 Si tetrahedra along the three crystallographic directions are obtained. The as-made interchain-expanded zeolite contains dangling Si–CH3 groups that, by calcination, connect to each other, resulting in a true, fully connected (except possible defects) three-dimensional zeolite framework with a very low density. Additionally, it features triple four-ring units not seen before in any type of zeolite. The silicate expansion–condensation approach we report may be amenable to further extra-large-pore zeolite formation. Ti can be introduced in this zeolite, leading to a catalyst that is active in liquid-phase alkene oxidations involving bulky molecules, which shows promise in the industrially relevant clean production of propylene oxide using cumene hydroperoxide as an oxidant
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Coupling different periodic building units for intergrowth Zeolites

  • Zeng, Jinjin
  • Lee, Hwajun
  • Jo, Donghui
  • Mayoral, Alvaro
  • Hong, Suk Bong
Multiple-phase disordered zeolites, i.e., intergrowth zeolites, are important industrial catalysts, like single-phase ordered zeolites, but little is known about their rational synthesis and phase competition, mainly due to current poor understanding of the zeolite crystallization mechanism. Here, we theoretically demonstrated that sodalite and cancrinite cage layers, the periodic building units (PerBUs) of FAU/EMT and SBT/SBS structures, respectively, could be nondefectively connected to each other across double rings of 6 tetrahedral atoms when inverted and mirrored. We then synthesized an unprecedented family of FAU/SBT/SBS intergrowths with controllable FAU portions (named as the PST-34 family of intergrowth zeolites) using a multiple inorganic cation approach, providing clear experimental evidence for the layer-by-layer crystal growth mechanism of zeolites. This study shows that control of interactive cooperation extent between different inorganic structure-directing agents in the presence of an unselective organic structure-directing agent may enable repeated stacking of different but structurally related PerBUs in intergrowth zeolite synthesis.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Exploring topochemical oxidation reactions for reversible tuning of thermal conductivity in Perovskite Fe Oxides

  • Varela-Domínguez, Noa
  • Claro, Marcel S.
  • Carbó-Argibay, Enrique
  • Magén, César
  • Rivadulla, Francisco
We present a study on the reversibility of thermal conductivity in iron oxides through topochemical oxygen exchange between brownmillerite (BM) (Ca,Sr)FeO2.5 and perovskite (PV) (Ca,Sr)FeO3.0. By using different oxidation methods, including gas phase (O2/O3), liquid phase (NaOCl in H2O), and solid electrolyte (Y2O3:ZrO2), we demonstrate that the oxidation pathway has a critical influence on the reversibility of the ionic-exchange process. Cyclic oxidation and reduction using O2/O3 or NaOCl lead to an important accumulation of structural defects, undermining the reversibility of thermal conductivity. In the case of wet oxidation, we demonstrate an inherent tendency of negative charge-transfer oxides toward amorphization and elucidate the origin of this effect. Conversely, the electrochemical injection of the O2– ions via a Y2O3:ZrO2 solid electrolyte reduces structural damage significantly, enhancing both reversibility and durability. This study underscores the importance of selecting appropriate topochemical oxygen exchange methods to maintain structural integrity and optimize functional performance in oxide-based tunable devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlled chemical functionalization toward 3D-2D carbon nanohorn-MoS2 heterostructures with enhanced electrocatalytic activity for protons reduction

  • Kagkoura, A.
  • Arenal, R.
  • Tagmatarchis, N.
The realization of novel heterostructures arising from the combination of nanomaterials is an effective way to modify their physicochemical and electrocatalytic properties, giving them enhanced characteristics stemming from their individual constituents. Interfacing carbon nanohorns (CNHs) possessing high porosity, large specific surface area, and good electrical conductivity, with MoS2 owning multiple electrocatalytic active sites but lacking significant conductivity, robust interactions, and effective structure, can be a strategy to boost the electrocatalytic reduction of protons to molecular hydrogen. Herein, in a stepwise approach, complementary functional groups are covalently introduced at the conical tips and sidewalls of CNHs, along with the basal plane of MoS2, en route the construction of 3D-2D CNH-MoS2 heterostructures. The increased MoS2 loading onto CNHs, improving and facilitating charge delocalization and transfer in neighboring CNHs, along with the plethora of active sites, results in excellent electrocatalytic activity for protons reduction, same as that of commercial Pt/C. Minute overpotential is registered, low Tafel slope and small charge-transfer resistance for electrocatalyzing the evolution of hydrogen from the newly prepared heterostructure of 0.029 V, 71 mV dec(-1), and 34.5 omega, respectively. Furthermore, the stability of the 3D-2D CNH-MoS2 heterostructure is validated after performing 10 000 ongoing electrocatalytic cycles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A solution-processed MoS2/graphene heterostructure mediated by a bifunctional block copolymer as a non-noble metal platform for hydrogen evolution

  • Plantzopoulou, Andriana
  • Sideri, Ioanna K.
  • Stergiou, Anastasios
  • Kafetzi, Martha
  • Pispas, Stergios
  • Arenal, Raul
  • Tagmatarchis, Nikos
Development of synthetic strategies towards two-dimensional laminar transition metal dichalcogenide/graphene heterostructures is of particular interest for the electrocatalytic hydrogen evolution reaction (HER). Herein, we describe the preparation of a molybdenum disulfide/graphene heterostructure, mediated by a bifunctional polystyrene-b-poly(acrylic acid) block copolymer. Surface engineering of graphene nanosheets by incorporation of ammonium-terminated organic chains facilitated attractive electrostatic interactions with the anionic polycarboxylate block of the copolymer, while the phenyl rings of the polystyrene block of the copolymer enabled the development of multiple van der Waals pi-S interactions with the surface sulfur atoms of MoS2. The heterostructure exhibits excellent HER performance, as a result of the synergistic effect of 1T-MoS2 loading onto graphene and the latter''s charge delocalization efficiency. An onset overpotential value of -0.18 V vs. RHE, a small charge transfer resistance of 36.2 omega and a large electrocatalytic surface area of 205 cm(2) were obtained, paving the way for the construction of advanced heterostructures based on graphene and transition metal dichalcogenides with improved electrocatalytic activity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Green synthesis of starch-capped Cu2O nanocubes and their application in the direct electrochemical detection of glucose

  • Jiménez-Rodríguez A.
  • Sotelo E.
  • Martínez L.
  • Huttel Y.
  • Ujué González M.
  • Mayoral A.
  • García-Martín J.M.
  • Videa M.
  • Cholula-Díaz J.L.
Glucose determination is an essential procedure in different fields, used in clinical analysis for the prevention and monitoring of diabetes. In this work, modified carbon paste electrodes with Cu2O nanocubes (Cu2O NCs) were developed to test electrochemical glucose detection. The synthesis of the Cu2O NCs was achieved by a green method using starch as the capping agent, obtaining cubic-like morphologies and particle sizes from 227 to 123 nm with increasing amounts of the capping agent, as corroborated by electron microscopy analysis. Their crystalline structure and purity were determined by X-ray diffraction. The capability of starch as a capping agent was verified by Fourier-transform infrared spectroscopy, in which the presence of functional groups of this biopolymer in the Cu2O NCs were identified. The electrochemical response to glucose oxidation was determined by cyclic voltammetry, obtaining a linear response of the electrical current as a function of glucose concentration in the range 100-700 µM, with sensitivities from 85.6 to 238.8 µA mM-1cm-2, depending on the amount of starch used in the synthesis of the Cu2O NCs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unveiling unique structural features of the YNU-5 aluminosilicate family

  • Zhang, Y.
  • Zhou, Y.
  • Sun, T.
  • Chen, P.
  • Li, C.
  • Kubota, Y.
  • Inagaki, S.
  • Dejoie, C.
  • Mayoral, A.
  • Terasaki, O.
YNU-5 (YFI type) is the first zeolite reported with interconnected 12-, 12-, and 8-ring pores showing a remarkable catalytic potential towards the dimethyl ether (DME)-to-olefin reaction. In this work, the structures of the as-synthesized, calcined and dealuminated YNU-5 zeolites, were investigated by various techniques with special emphasis on advanced electron microscopy methods. The frameworks of the three materials were solely determined by three-dimension electron diffraction tomography, and the space group for the three of them was determined to be Cmmm, which is of higher symmetry than the previous reported result. Rietveld refinement was performed against synchrotron Powder X-ray diffraction data in order to obtain precise information of the framework and to locate the organic species, cations and water. Additionally, spherical aberration-corrected scanning transmission electron microscopy was employed to study the local fine structure and to indicate surface reconstruction associated to the displacement of the vacancies through the dealumination process. Finally, a minor phase, whose structure was solved by electron microscopy was found to be MSE framework type, appeared in all the three YNU-5 materials. Overall, the electron microscopy analyses reported in the present work provide additional information regarding the YNU-5 structure in terms of space group determination, additional surface terminations and the identification of a minor phase.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structural Characterization of Large-Pore Intergrowth Zeolites SSZ-31 and PST-38

  • Kemp, Kingsley Christian
  • Jo, Donghui
  • Mayoral, Alvaro
  • Hong, Suk Bong
The structure determination of multiple-phase intergrowth zeolites faces more challenges than that of single-phase ordered zeolites because of their structural complexity and diversity. Here, we directly visualized the atomic structure and one-dimensional stacking disorder of the pure-silica large-pore intergrowth zeolites SSZ-31 and PST-38, using aberration-corrected scanning transmission electron microscopy. The atomic-resolution images revealed the presence of distinct polymorphs, their intergrowth boundaries, and cages formed through local connectivity variations. It was found that while SSZ-31 is an almost pure (ca. 90%) polymorph A, E, or their intergrowth, with the ABC stacking of 12-ring channels, PST-38 is a predominant intergrowth between SSZ-31 polymorph C and a 1D 10-ring structure, denoted as PST-39, along the same axis. Furthermore, the latter material also contains a region where the 8-membered rings are connected to the 12- and 10-membered rings. The structural features of SSZ-31 and PST-38 presented here provide insights into the design and synthesis of intergrowth zeolites.