Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 94
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Hydrotalcite-embedded magnetite nanoparticles for hyperthermia-triggered chemotherapy

  • Simeonidis, Konstantinos
  • Kaprara, Efthimia
  • Rivera Gil, Pilar, 1976-
  • Xu, Ruixue
  • Teran, Francisco J.
  • Kokkinos, Evgenios
  • Mitropoulos, Athanassios
  • Maniotis, Nikolaos
  • Balcells, Lluis
A magnetic nanocomposite, consisting of Fe3O4 nanoparticles embedded into a Mg/Al layered double hydroxide (LDH) matrix, was developed for cancer multimodal therapy, based on the combination of local magnetic hyperthermia and thermally induced drug delivery. The synthesis procedure involves the sequential hydrolysis of iron salts (Fe2+, Fe3+) and Mg2+/Al3+ nitrates in a carbonate-rich mild alkaline environment followed by the loading of 5-fluorouracil, an anionic anticancer drug, in the interlayer LDH space. Magnetite nanoparticles with a diameter around 30 nm, dispersed in water, constitute the hyperthermia-active phase able to generate a specific loss of power of around 500 W/g-Fe in an alternating current (AC) magnetic field of 24 kA/m and 300 kHz as determined by AC magnetometry and calorimetric measurements. Heat transfer was found to trigger a very rapid release of drug which reached 80% of the loaded mass within 10 min exposure to the applied field. The potential of the Fe3O4/LDH nanocomposites as cancer treatment agents with minimum side-effects, owing to the exclusive presence of inorganic phases, was validated by cell internalization and toxicity assays., The project was financially supported by Stavros Niarchos Foundation and Eastern Macedonia and Thrace Institute of Technology fellowships for assisting young scientists in prototyping innovative products by using cutting-edge technology. Specific measurements received funding from the EU-H2020 research and innovation programme under grant agreement No. 654360 having benefitted from the access provided by ICMAB-CSIC and Universitat Autonoma de Barcelona in Bellaterra-Barcelona within the framework of the NFFA-Europe Transnational Access Activity. Authors would like to thank Anna Esther Carrillo for the experimental assistance during SEM observations and Bernat Bozzo for the support in SQUID measurements. This work was partially funded by Spanish Ministry of Science, Innovation and Universities (MAT2017-85617-R, SEV-2016-0686, RED2018-102626-T) and Comunidad de Madrid (NANOMAGCOST). COST Actions CA17115 (MyWave), and CA17140 (Nano2Clinic) are also acknowledged. The UPF acknowledges the Ministry of Science, Innovation and Universities (MICINN) and the AEI (RYC-2012-10059, MDM-2014-0370-04, CTQ2013-45433-PFEDER], MAT2016-75362-C3-2-R, AEI-SAF2015-73052-EXP) and the AGAUR (2017 SGR 1054) for financial support.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Crystal engineering and ferroelectricity at the nanoscale in epitaxial 1D manganese oxide on silicon

  • Gomez, Andrés
  • Vila Fungueiriño, José Manuel
  • Jolly, Claire
  • Garcia-Bermejo, Ricardo
  • Oró-Solé, Judith
  • Ferain, Etienne
  • Mestres, Narcís
  • Magén, César
  • Gazquez, Jaume
  • Rodriguez-Carvajal, Juan
  • Carretero-Genevrier, Adrián
Ferroelectric oxides have attracted much attention due to their wide range of applications, particularly in electronic devices such as nonvolatile memories and tunnel junctions. As a result, the monolithic integration of these materials into silicon technology and their nanostructuration to develop alternative cost-effective processes are among the central points in the current technology. In this work, we used a chemical route to obtain nanowire thin films of a novel Sr1+δMn8O16 (SMO) hollandite-type manganese oxide on silicon. Scanning transmission electron microscopy combined with crystallographic computing reveals a crystal structure comprising hollandite and pyrolusite units sharing the edges of their MnO6 octahedra, resulting in three types of tunnels arranged along the c axis, where the ordering of the Sr atoms produces natural symmetry breaking. The novel structure gives rise to ferroelectricity and piezoelectricity, as revealed by local direct piezoelectric force microscopy measurements, which confirmed the ferroelectric nature of the SMO nanowire thin films at room temperature and showed a piezoelectric coefficient d33 value of 22 ± 6 pC N−1. Moreover, we proved that flexible vertical SMO nanowires can be harvested providing an electrical output energy through the piezoelectric effect, showing excellent deformability and high interface recombination. This work indicates the possibility of engineering the integration of 1D manganese oxides on silicon, a step which precedes the production of microelectronic devices.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

Room temperature biaxial magnetic anisotropy in La0.67Sr0.33MnO3 thin films on SrTiO3 buffered MgO (001) substrates for spintronic applications

  • Kumar Chaluvadi Sandeep
  • Orgiani Pasquale
  • Rousseau Olivier
  • Vinai Giovanni
  • Yu Petrov Aleksandr
  • Torelli Piero
  • Pautrat Alain
  • Camarero, Julio
  • Perna, Paolo
  • Mechin Laurence
  • Ajejas, Fernando
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publicación Artículo científico (JournalArticle)

Room temperature biaxial magnetic anisotropy in La0.67Sr0.33MnO3 thin films on SrTiO3 buffered MgO (001) substrates for spintronic applications

  • Chaluvadi S.K.
  • Orgiani P.
  • Rousseau O.
  • Vinai G.
  • Petrov A.Y.
  • Torelli P.
  • Pautrat A.
  • Camarero, Julio
  • Perna, Paolo
  • Mechin L.
  • Ajejas, Fernando
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional protein-based nanomaterial produced in microorganisms recognized as safe: A new platform for biotechnology

  • Cano Garrido, Olivia
  • Giró Paradell, Irene
  • Tatkiewicz, Witold I.
  • Ratera, Immaculada
  • Veciana, Jaume
  • García Fruitós, Elena
Cano Garrido, Olivia et al., Inclusion bodies (IBs) are protein-based nanoparticles formed in Escherichia coli through stereospecific aggregation processes during the overexpression of recombinant proteins. In the last years, it has been shown that IBs can be used as nanostructured biomaterials to stimulate mammalian cell attachment, proliferation, and differentiation. In addition, these nanoparticles have also been explored as natural delivery systems for protein replacement therapies. Although the production of these protein-based nanomaterials in E. coli is economically viable, important safety concerns related to the presence of endotoxins in the products derived from this microorganism need to be addressed. Lactic acid bacteria (LAB) are a group of food-grade microorganisms that have been classified as safe by biologically regulatory agencies. In this context, we have demonstrated herein, for the first time, the production of fully functional, IB-like protein nanoparticles in LAB. These nanoparticles have been fully characterized using a wide range of techniques, including field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, zymography, cytometry, confocal microscopy, and wettability and cell coverage measurements. Our results allow us to conclude that these materials share the main physico-chemical characteristics with IBs from E. coli and moreover are devoid of any harmful endotoxin contaminant. These findings reveal a new platform for the production of protein-based safe products with high pharmaceutical interest., This work was supported by grants from INIA, MINECO, Spain to AA and EGF (RTA2012-00028-C02-02), from DGI to JV (BeWell CTQ2013-40480-R), from MINECO to EGF and IR (MAT2013-50036-EXP) and to ICMAB (Severo Ochoa Programme for Centres of Excellence in R&D – SEV – 2015-0496), from Agència de Gestió d’Ajuts Universitaris i de Recerca to AV and JV (2014SGR-132 and 2014-SGR-17, respectively) and from EU to JV, AV and IR (H2020-INFRAIA-2014-2015; NFFA-654360). Besides, the authors acknowledge the financial support granted to AV and JV from the Centro de Investigación Biomédica en Red (CIBER) de Bioingeniería, Biomateriales y Nanomedicina financed by the Instituto de Salud Carlos III with assistance from the European Regional Development. OCG and WIT received a PhD fellowship from MECD (FPU) and CSIC (JAE-pre), respectively, and EGF a post-doctoral fellowship from INIA (DOC-INIA). AV has been distinguished with an ICREA ACADEMIA Award. The authors also acknowledge Micalis Institute, INRA, France that kindly provide us the strain clpP− htrA−-NZ9000 (patent n° EP1141337B1/US6994997B1). We are also indebted to “Servei de Microscopia” (UAB) and ICTS “NANBIOSIS”, more specifically to the Protein Production Platform of CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN)/IBB, at the UAB SepBioES scientific-technical service (http://www.nanbiosis.es/unit/u1-protein-production-platform-ppp/). No other potential conflicts of interest were identified., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Topological distribution of reversible and non-reversible degradation in perovskite solar cells

  • Gómez Rodríguez, Andrés
  • Sánchez, Sandy
  • Campoy Quiles, Mariano
  • Abate, Antonio
Lead halide perovskites have recently raised as an easy to process and cost-effective photovoltaic material. However, stability issues have to be addressed to meet the market need for 25 years durable technology. The stability of the perovskite itself, as well as the stability of the perovskite embedded in a complete device under real working conditions, are a key challenge for perovskite solar cells. Within this study, we used Photoconductive Atomic Force Microscopy (pcAFM) and Photoluminescence imaging (PL) to investigate at the nanoscale level the degradation of the perovskite film under light and voltage stress. Then, we correlate the nanoscale pcAFM and PL analysis to the macroscopic device behaviour in similar ageing condition. We found that non-reversible performance losses in a complete device originate from degradation localised at the grain boundaries of the perovskite film. Interesting, within the bulk of the perovskite grains we observed fully reversible behaviours. We conclude that the grain boundaries are detrimental to the device stability and they need to be minimized or passivated to achieve fully stable perovskite solar cells even under anhydrous conditions., NFFA-Europe has received funding from the EU's H2020 framework programme for research and innovation under grant agreement n. 654360. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496) and projects ENE2015-68995-REDT and MAT2015-70850-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical Analysis of Oxygen Self‐Diffusion in Ultrathin CeO2 Layers at Low Temperatures

  • Neuderth, Paula
  • Hille, Pascal
  • Martí Sánchez, Sara
  • Mata, Maria de la
  • Coll, Mariona
  • Arbiol, Jordi
  • Eickhoff, Martin
An optical in situ strategy for the analysis of oxygen diffusion in ultrathin ceria layers with a thickness of 2–10 nm at temperatures between 50 and 200 °C is presented, which allows for the determination of diffusion coefficients. This method is based on the sensitivity of the photoluminescence (PL) intensity of InGaN nanowires to adsorbed oxygen. The oxygen diffusion through an ultrathin CeO2 coating deposited on the InGaN nanowires is monitored by analyzing the transient PL behavior of the InGaN nanowires, which responds to changes of the oxygen concentration in the environment when the corresponding oxygen concentration is established at the CeO2/InGaN interface due to diffusion through the coating. Quantitative evaluation of the oxygen diffusion in CeO2 based on a model considering Langmuir Adsorption and recombination yields a diffusion coefficient D of (2.55 ± 0.05) × 10−16 cm2 s−1 at a temperature of 100 °C. Temperature‐dependent measurements reveal an Arrhenius type behavior of D with an activation energy of (0.28 ± 0.04) eV. In contrast, no oxygen diffusion is detected for an ultrathin layer (≥5 nm) of Al2O3, which is known as a poor oxygen ion conductor within the analyzed temperature regime., We thank Herbert Over from the Institute of Physical Chemistry at the JLU Giessen for sharing his knowledge and experience and helping improve the manuscript. Financial support was provided by the DFG via the GrK (Research training group) 2204 “Substitute Materials for sustainable Energy Technologies.” M.C. thanks Ramón y Cajal program RYC‐2013‐12448. The authors also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐ 2015‐0496) and MAT2017‐83169‐R AEI/FEDER,UE. This article is based upon work from COST Action MP1402 “Hooking together European research in atomic layer deposition (HERALD),” supported by COST (European Cooperation in Science and Technology). S.M.S. acknowledges funding from “Programa Internacional de Becas ‘la Caixa”’‐Severo Ochoa.” ICN2 members acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017‐85087‐C3. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, grant no. SEV‐2013‐0295) and is funded by the CERCA Programme /Generalitat de Catalunya. Part of this work was performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. This received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement no. 654360 NFFA‐Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface-Bound Gradient Deposition of Protein Nanoparticles for Cell Motility Studies

  • Tatkiewicz, Witold I.
  • Seras Franzoso, Joaquin
  • García Fruitós, Elena
  • Vazquez, Esther
  • Kyvik Ruiz, Adriana
  • Guasch, Judit
  • Villaverde, Antonio
  • Veciana, Jaume
  • Ratera, Immaculada
A versatile evaporation-assisted methodology based on the coffee-drop effect is described to deposit nanoparticles on surfaces, obtaining for the first time patterned gradients of protein nanoparticles (pNPs) by using a simple custom-made device. Fully controllable patterns with specific periodicities consisting of stripes with different widths and distinct nanoparticle concentration as well as gradients can be produced over large areas (∼10 cm2) in a fast (up to 10 mm2/min), reproducible, and cost-effective manner using an operational protocol optimized by an evolutionary algorithm. The developed method opens the possibility to decorate surfaces “a-la-carte” with pNPs enabling different categories of high-throughput studies on cell motility., The research leading to these results received funding from DGI grants (MOTHER MAT2016-80826-R and Dynamo MAT2013-50036EXP), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), Generalitat de Catalunya (grant 2014-SGR-17, 2017-SGR-918 and CERCA Programme), the COST Action CA15126 Between Atom and Cell, the European Social Fund and EU to J.V., A.V., and I.R. (H2020-INFRAIA-2014-2015; NFFA-654360). ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). This work has been developed inside the Materials Science PhD programs of Universitat Autònoma de Barcelona (UAB). The authors are indebted to the “Servei de Microscòpia” of the UAB. Protein NP production has been partially performed by the ICTS “NANBIOSIS”, more specifically by the Protein Production Platform of CIBER-BBN/IBB (http://www.nanbiosis.es/unit/u1-protein-production-platform-ppp/). W.I.T. is grateful to Consejo Superior de Investigaciones Científicas (CSIC) for a “JAE-pre” fellowship. J.S.-F. is recipient of a Post-Doctoral fellowship from Asociación Española Contra el Cáncer (AECC), E.G-F. of a Post-Doctoral fellowship from INIA (DOC-INIA), and A.V. of an ICREA ACADEMIA award. This research was also supported by the People Programme (Marie Curie Actions) of the 7th Framework Programme of the European Union (FP7/2007-2013) under the grant agreement no. 600388 of REA and the Agency for Business Competitiveness ACCIÓ through a Tecniospring fellowship (TECSPR15-1-0015) to J.G. J.G. is also grateful to the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck Institute for Medical Research (Heidelberg, Germany)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-texturizing electronic properties of a 2-dimensional GdAu2 layer on Au(111): The role of out-of-plane atomic displacement

  • Correa, Alexander
  • Farnesi Camellone, Matteo
  • Barragán, Ana
  • Kumar, Abhishek
  • Cepek, Cinzia
  • Pedio, Maddalena
  • Fabris, Stefano
  • Vitali, Lucia
Here, we show that the electronic properties of a surface-supported 2-dimensional (2D) layer structure can self-texturize at nanoscale. The local electronic properties are determined by structural relaxation processes through variable adsorption stacking configurations. We demonstrate that the spatially modulated layer-buckling, which arises from the lattice mismatch and the layer/substrate coupling at the GdAu/Au(111) interface, is sufficient to locally open an energy gap of ∼0.5 eV at the Fermi level in an otherwise metallic layer. Additionally, this out-of-plane displacement of the Gd atoms patterns the character of the hybridized Gd-d states and shifts the center of mass of the Gd 4f multiplet proportionally to the lattice distortion. These findings demonstrate the close correlation between the electronic properties of the 2D-layer and its planarity. We demonstrate that the resulting template shows different chemical reactivities which may find important applications., This project is partially funded by the EU-H2020 research and innovation programme under grant agreement no. 654360, NFFA-Europe and the Spanish Ministry of Economy (MAT2013-46593-C6-4-P and MAT2016-78293-C6-5-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct and converse piezoelectric responses at the nanoscale from epitaxial BiFeO3 thin films grown by polymer assisted deposition

  • Vila-Fungueiriño, José M.
  • Gómez Rodríguez, Andrés
  • Antoja-Lleonart, Jordi
  • Gázquez, Jaume
  • Magén, César
  • Noheda, Beatriz
  • Carretero Genevrier, Adrian
We use an original water-based chemical method to grow pure epitaxial BiFeO3 (BFO) ultra-thin films with excellent piezoelectric properties. Particularly, we show that this novel chemical route produces higher natural ferroelectric domain size distribution and coercive field compared to similar BFO films grown by physical methods. Moreover, we measured the d33 piezoelectric coefficient of 60 nm thick BFO films by a direct approach, using Direct Piezoelectric Force Microscopy (DPFM). As a result, first piezo-generated charge maps of a very thin BFO layer were obtained applying this novel technology. We also performed a comparative study of the d33 coefficients between standard PFM analysis and DPFM microscopy showing similar values i.e. 17 pm V−1 and 22 pC N−1, respectively. Finally, we proved that the directionality of the piezoelectric effect in BFO ferroelectric thin films is preserved at low thickness dimensions demonstrating the potential of chemical processes for the development of low cost functional ferroelectric and piezoelectric devices., A. C.-G. and J. M. V.-F. acknowledge the financial support from the French Agence Nationale de la Recherche (ANR) and project Q-NOSS ANR-16-CE09-0006-01. J. G. acknowledges the Ramon y Cajal program (RYC-2012-11709). The research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative–I3). This project has received funding from the EU-H2020 research and innovation Programme under grant agreement No 654360 having benefitted from the access provided by ICMAB-CSIC in Barcelona within the framework of the NFFA-Europe. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) Transnational Access Activity., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epitaxial La0.7Sr0.3MnO3 thin films on silicon with excellent magnetic and electric properties by combining physical and chemical methods

  • Vila-Fungueiriño, José M.
  • Gázquez, Jaume
  • Magén, César
  • Saint-Girons, Guillaume
  • Bachelet, Romain
  • Carretero Genevrier, Adrian
Half-metallic ferromagnetic La0.7Sr0.3MnO3 (LSMO) represents an appealing candidate to be integrated on silicon substrates for technological devices such as sensors, data storage media, IR detectors, and so on. Here, we report high-quality epitaxial LSMO thin films obtained by an original combination of chemical solution deposition (CSD) and molecular beam epitaxy (MBE). A detailed study of the thermal, chemical, and physical compatibility between SrTiO3 (STO)/Si buffer layers and LSMO films, grown by MBE and CSD, respectively, enables a perfect integration of both materials. Importantly, we show a precise control of the coercive field of LSMO films by tuning the mosaicity of the STO/Si buffer layer. These results demonstrate the enormous potential of combining physical and chemical processes for the development of low-cost functional oxide-based devices compatible with the complementary metal oxide semiconductor technology., ACG acknowledges the financial support from the French Agence Nationale pour la Recherche (ANR), project Q-NOSS ANR-16-CE09-0006-01 and École Centrale de Lyon under the BQR 2016 project. The research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative–I3). This project has received funding from the EU‐H2020 research and innovation Program under grant agreement No 654360 having benefitted from the access provided by ICMAB-CSIC in Barcelona within the framework of the NFFA‐Europe Transnational Access Activity. Fruitful discussions with Pr. F. Rivadulla from USC are highly acknowledged. INL authors acknowledge the European Commission for funding the project TIPS (H2020-ICT-02-2014-1-644453). We thank P. Regreny, C. Botella, and J. B. Goure for the MBE technical assistance on the Nanolyon technological platform., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vertical growth of superconducting crystalline hollow nanowires by He+ focused ion beam induced deposition

  • Córdoba, Rosa
  • Ibarra, Alfonso
  • Mailly, Dominique
  • Teresa, José María de
Novel physical properties appear when the size of a superconductor is reduced to the nanoscale, in the range of its superconducting coherence length (ξ0). Such nanosuperconductors are being investigated for potential applications in nanoelectronics and quantum computing. The design of three-dimensional nanosuperconductors allows one to conceive novel schemes for such applications. Here, we report for the first time the use of a He+ focused-ion-beam-microscope in combination with the W(CO)6 precursor to grow three-dimensional superconducting hollow nanowires as small as 32 nm in diameter and with an aspect ratio (length/diameter) of as much as 200. Such extreme resolution is achieved by using a small He+ beam spot of 1 nm for the growth of the nanowires. As shown by transmission electron microscopy, they display grains of large size fitting with face-centered cubic WC1–x phase. The nanowires, which are grown vertically to the substrate, are felled on the substrate by means of a nanomanipulator for their electrical characterization. They become superconducting at 6.4 K and show large critical magnetic field and critical current density resulting from their quasi-one-dimensional superconducting character. These results pave the way for future nanoelectronic devices based on three-dimensional nanosuperconductors., This work was supported by the financial support from Spanish Ministry of Economy and Competitiveness through the projects MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R, MAT2017-82970-C2-2-R, and from regional Gobierno de Aragon through project E26 and E81 with European Social Fund. R.C. acknowledges Juan de la Cierva-Incorporacion 2014 program. This project has received funding from the EU-H2020 research and innovation programme under Grant Agreement No. 654360 NFFA-Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetoelectric dual-particulate composites with wasp-waisted magnetic response for broadband energy harvesting

  • Galizia, Pietro
  • Algueró, Miguel
  • Bernier, N.
  • Gambacorti, N.
  • Aza, E.
  • Lappas, A.
  • Venet, Michel
  • Galassi, C.
Dual-particulate composites of cobalt ferrite dispersed in a fully dense PZT matrix are produced by quite-fast sintering of mechanically activated powders. By high-energy milling of the powders a bi-modal grain size distribution, with octahedral nano-grains and larger grains grown by multiple parallel twinning, are achieved in the final microstructure. The material display a “wasp-waisted” magnetic response as a consequence of the two main CoFeO grain populations and can be exploited for broadband energy harvesting or field sensors. After poling under 5 kV/mm, a maximum d of 30 pC/N was achieved. This value is an order of magnitude lower than that of bulk PZT. Nevertheless, a magnetoelectric coefficient of 1.74 mV cm Oe is obtained, which suggests the high potentiality of these materials, since this value is higher than that shown by magnetoelectric composites with similar composition and connectivity reported in literature. This is so for a partially poled material and thus, magnetoelectric coefficients should be significantly increased by improving the poling process., PG acknowledges the contribution of the Nanoscience Foundries and Fine Analysis (NFFA) European Research Infrastructure. In fact,this project has received funding from the EU-H2020 research andinnovation programme under grant agreement No 654360 having benefitted from the access provided by Laboratoire d'electroniquedes technologies de l'information (CEA-LETI) in Grenoble and Foundation for Research and Technology - Hellas (FORTH) in Her-aklion within the framework of the NFFA-Europe Transnationa lAccess Activity. Guillaume Audoit (CEA-LETI) and Audrey Jannaud(SERMA Technologies) are gratefully acknowledged for the prepa-ration of the sample for TEM analysis. NB and NG acknowledge the“Recherches Technologiques de Base”Program of the French Min-istry of Research which has supported the NanoCharacterisationPlatForm (PFNC). MA also acknowledges funding by SpanishMINECO (projects MAT2014-58816-R and MAT2017-88788-R), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Focused ion beam induced processing of nanosuperconductors

  • Córdoba, Rosa
  • Teresa, José María de
Resumen del trabajo presentado al 7th International Workshop on Focused Electron Beam-Induced (FEBIP), celebrado en Modena (Italia) del 10 al 13 de julio de 2018., This project has received funding from the EU-H2020 research and innovation programme under grant agreement No 654360 NFFA-Europe., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferroelectricity-free lead halide perovskites

  • Gómez Rodríguez, Andrés
  • Wang, Qiong
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
  • Abate, Antonio
Direct piezoelectric force microscopy (DPFM) is employed to examine whether or not lead halide perovskites exhibit ferroelectricity. Compared to conventional piezoelectric force microscopy, DPFM is a novel technique capable of measuring piezoelectricity directly. This fact is fundamental to be able to examine the existence of ferroelectricity in lead halide perovskites, an issue that has been under debate for several years. DPFM is used to detect the current signals, i.e. changes in the charge distribution under the influence of the scan direction and applied force of the atomic force microscope (AFM) tip in contact mode. For comparison, (i) we use DPFM on lead halide perovskites and well-known ferroelectric materials (i.e. periodically poled lithium niobate and lead zirconate titanate); and (ii) we conduct parallel experiments on MAPbI3 films of different grain sizes, film thicknesses, substrates, and textures using DPFM as well as piezoelectric force microscopy (PFM) and electrostatic force microscopy (EFM). In contrast to previous work that claimed there were ferroelectric domains in MAPbI3 perovskite films, our work shows that the studied perovskite films Cs0.05(FA0.83MA0.17)0.95Pb(I0.83Br0.17)3 and MAPbI3 are ferroelectricity-free. The observed current profiles of lead halide perovskites possibly originate from ion migration that happens under an applied electrical bias and in strained samples under mechanical stress. This work provides a deeper understanding of the fundamental physical properties of the organic–inorganic lead halide perovskites and solves a longstanding dispute about their non-ferroelectric character: an issue of high relevance for optoelectronic and photovoltaic applications., The authors gratefully acknowledge the Spanish Ministerio de Economía, Industria y Competitividad for its support through Grant No. MAT2015-70850-P, PGC2018-095411-B-I00 and SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grant MAT2015-70850-P (HIBRI2). We thank the financial support from the European Research Council through project ERC CoG648901. We thank the Program under grant agreement No. 654360 within the framework of NFFA-Europe that benefits us with access to ICMAB-CSIC in Barcelona. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). A. A. thanks the National Natural Science Foundation of China under the grant number 21750110442., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Encapsulation of cationic iridium(iii) tetrazole complexes into a silica matrix: synthesis, characterization and optical properties

  • Zanoni, Ilaria
  • Fiorini, Valentina
  • Rosado, Marcos
  • Ballesteros, Belén
  • Androulidaki, Maria
  • Blosi, Magda
  • Ortelli, Simona
  • Stagni, Stefano
  • Dondi, Michele
  • Costa, Anna Luisa
Herein we report the easy incorporation of brightly phosphorescent cationic iridium(III) tetrazole complexes into a silica based matrix via an easily scalable colloidal process. For this purpose, two cationic Ir(III) emitters bearing 5-aryl tetrazole ligands (R-CN4) were selected: blue [F2IrPTZ-Me]+ (C^N = F2ppy; N^N = PTZ-Me – 2-(2-methyl-2H-tetrazol-5-yl)pyridine) and red [IrQTZ-Me]+ (C^N = ppy; N^N = QTZ-Me – 2-(2-methyl-2H-tetrazol-5-yl)quinoline). The cationic complexes were readily adsorbed to negatively charged silica nanoparticles and trapped in the sol–gel matrix. The sol-to-solid phase transfer was performed by using an innovative spray-freeze-drying technique, leading to the formation of phosphorescent solid micro-granules. The structural and optical characterisation of the Ir(III) complexes together with SiO2 nanoparticles, nanosols (Ir@SiO2) and powders (Ir@SiO2 powders), revealed how the presence of the Ir(III)-based complexes did not alter the morphology of the colloidal silica or granulated phases. Moreover, the silica matrix did not interfere with the optical properties of the embedded complexes. The distribution of [F2IrPTZ-Me]+ and [IrQTZ-Me]+ in the spray-freeze-dried powders was qualitatively evaluated by fluorescence microscopy, revealing how the luminescent particles were homogeneously dispersed all over the silica matrix. Interestingly, in aqueous solution the release of complex [F2IrPTZ-Me]+ from the corresponding Ir@SiO2 powder is almost negligible, therefore suggesting that a strong interaction occurs between the host–silica matrix and the Ir(III) guest complex., This project has benefited from the EU-H2020 research program under grant agreement no. 654360 and has benefited from the access provided by the Fundacio Institut Català de Nanociència y Nanotecnologia – ICN2 – Barcelona (Spain) and the Foundation for Research and Technology Hellas – FORTH – Heraklion (Greece) within the framework of the NFFA-Europe Transnational Access Activity. The ICN2 is funded by the CERCA programme (Generalitat de Catalunya) and is supported by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2013-0295). The authors wish to thank the Italian Ministry of Education, University and Research (MIUR) for their financial support (PRIN project: Towards a Sustainable Chemistry: Design of Innovative Metal–Ligand Systems for Catalysis and Energy Applications)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimizing the yield of A-polar GaAs nanowires to achieve defect-free zinc blende structure and enhanced optical functionality

  • Zamani, Mahdi
  • Tütüncüoglu, Gözde
  • Martí-Sànchez, Sara
  • Francaviglia, Luca
  • Güniat, Lucas
  • Ghisalberti, Lea
  • Potts, Heidi
  • Friedl, Martin
  • Markov, Edoardo
  • Kim, Wonjong
  • Leran, Jean-Baptiste
  • Dubrovskii, Vladimir G.
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
Compound semiconductors exhibit an intrinsic polarity, as a consequence of the ionicity of their bonds. Nanowires grow mostly along the (111) direction for energetic reasons. Arsenide and phosphide nanowires grow along (111)B, implying a group V termination of the (111) bilayers. Polarity engineering provides an additional pathway to modulate the structural and optical properties of semiconductor nanowires. In this work, we demonstrate for the first time the growth of Ga-assisted GaAs nanowires with (111)A-polarity, with a yield of up to ∼50%. This goal is achieved by employing highly Ga-rich conditions which enable proper engineering of the energies of A and B-polar surfaces. We also show that A-polarity growth suppresses the stacking disorder along the growth axis. This results in improved optical properties, including the formation of AlGaAs quantum dots with two orders or magnitude higher brightness. Overall, this work provides new grounds for the engineering of nanowire growth directions, crystal quality and optical functionality., The funding for this research was provided by Swiss National Science Foundation (SNSF), National Centre of Competence in Research Quantum Science and Technology (NCCR QSIT) and Horizon 2020 European Union Funding for Research and Innovation through projects INDEED and LIMQUET. SMS acknowledges funding from “Programa Internacional de Becas “la Caixa”-Severo Ochoa”. SMS and JA acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO ENE2017-85087-C3-3-R project. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya. This work has received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement No. 654360 NFFA-Europe. VGD thanks the Russian Foundation for Basic Research for financial support under grants 17-52-16017, 16-29-03129, 16-02-00134, 16-29-03283, and 18-02-40006., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical emission of GaN/AlN quantum-wires – the role of charge transfer from a nanowire template

  • Müßener, Jan
  • Greif, Ludwing A. Th.
  • Kalinowski, Stefan
  • Callsen, Gordon
  • Hille, Pascal
  • Schörmann, Jörg
  • Wagner, M. R.
  • Schliwa, Andrei
  • Martí-Sànchez, Sara
  • Arbiol, Jordi
  • Hoffmann, Axel
  • Eickhoff, Martin
We show that one-dimensional (1d) GaN quantum-wires (QWRs) exhibit intense and spectrally sharp emission lines. These QWRs are realized in an entirely self-assembled growth process by molecular beam epitaxy (MBE) on the side facets of GaN/AlN nanowire (NW) heterostructures. Time-integrated and time-resolved photoluminescence (PL) data in combination with numerical calculations allow the identification and assignment of the manifold emission features to three different spatial recombination centers within the NWs. The recombination processes in the QWRs are driven by efficient charge carrier transfer effects between the different optically active regions, providing high intense QWR luminescence despite their small volume. This is deduced by a fast rise time of the QWR PL, which is similar to the fast decay-time of adjacent carrier reservoirs. Such processes, feeding the ultra-narrow QWRs with carriers from the relatively large NWs, can be the key feature towards the realization of future QWR-based devices. While processing of single quantum structures with diameters in the nm range presents a serious obstacle with respect to their integration into electronic or photonic devices, the QWRs presented here can be analyzed and processed using existing techniques developed for single NWs., This work was supported by the Deutsche Forschungsgemeinschaft (Sfb 787). SMS acknowledges funding from “Programa Internacional de Becas “la Caixa”-Severo Ochoa”. SMS and JA acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish Ministerio de Economía y Competitividad project ValPEC (ENE2017-85087-C3). ICN2 acknowledges support from the Severo Ochoa Program (Ministerio de Economía y Competitividad, Grant SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autónoma de Barcelona Materials Science PhD program. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative - I3). This work has received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement No. 654360 NFFA-Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Template-assisted scalable nanowire networks

  • Friedl, Martin
  • Cerveny, Kris
  • Weigele, Pirmin
  • Tütüncüoglu, Gözde
  • Martí-Sànchez, Sara
  • Huang, Chunyi
  • Patlatiuk, Taras
  • Potts, Heidi
  • Sun, Zhiyuan
  • Hill, Megan O.
  • Güniat, Lucas
  • Kim, Wonjong
  • Zamani, Mahdi
  • Dubrovskii, Vladimir G.
  • Arbiol, Jordi
  • Lauhon, Lincoln J.
  • Zumbühl, Dominik M.
  • Fontcuberta i Morral, Anna
Topological qubits based on Majorana Fermions have the potential to revolutionize the emerging field of quantum computing by making information processing significantly more robust to decoherence. Nanowires are a promising medium for hosting these kinds of qubits, though branched nanowires are needed to perform qubit manipulations. Here we report a gold-free templated growth of III–V nanowires by molecular beam epitaxy using an approach that enables patternable and highly regular branched nanowire arrays on a far greater scale than what has been reported thus far. Our approach relies on the lattice-mismatched growth of InAs on top of defect-free GaAs nanomembranes yielding laterally oriented, low-defect InAs and InGaAs nanowires whose shapes are determined by surface and strain energy minimization. By controlling nanomembrane width and growth time, we demonstrate the formation of compositionally graded nanowires with cross-sections less than 50 nm. Scaling the nanowires below 20 nm leads to the formation of homogeneous InGaAs nanowires, which exhibit phase-coherent, quasi-1D quantum transport as shown by magnetoconductance measurements. These results are an important advance toward scalable topological quantum computing., Authors from EPFL and U. Basel acknowledge funding through the NCCR QSIT. Authors from EPFL further thank funding from SNF (project no. IZLRZ2-163861) and H2020 via the ITN project INDEED. Work at U. Basel was partially supported by the Swiss NSF, and the Swiss Nanoscience Institute SNI. S.M.S. acknowledges funding from “Programa Internacional de Becas “la Caixa″-Severo Ochoa”. J.A. and S.M.S. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated project ValPEC (ENE2017-85087-C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, grant no. SEV2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya. This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement no. 654360 NFFA-Europe. V.G.D. thanks the Ministry of Education and Science of the Russian Federation for financial support under grant no. 14-613-21-0055 (project ID RFMEFI61316 × 0055). L.J.L. acknowledges support of NSF DMR-1611341. M.O.H. acknowledges support of the NSF GRFP. NUCAPT received support from the MRSEC program (NSF DMR-1720139) at the Materials Research Center, the SHyNE Resource (NSF ECCS-1542205), and the Initiative for Sustainability and Energy (ISEN) at Northwestern University., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic and ferroelectric properties, crystal and magnetic structures of SrFe11.9In0.1O19

  • Turchenko, Vitalii
  • Trukhanov, Alex
  • Trukhanov, Sergei
  • Damay, Francoise
  • Porcher, Florence
  • Balasoiu, Maria
  • Lupu, Nicoleta
  • Chiriac, Horia
  • Bozzo, Bernat
  • Fina, Ignasi
  • Waliszewski, Janusz
  • Kostishin, V.G.
  • Recko, Katarzyna
  • Polosan, Silviu
The structural investigations of SrFe11.9In0.1O19 compound synthesized by solid-state method have been carried by neutron diffraction method in a wide temperature range. The appearace of spontaneous polarization that coexists with ferrimagnetic ordering has been found out at room temperature in strontium hexaferrite partially substituted with In ions. In order to explaine the presence of ferroelectric properties in SrFe11.9In0.1O19 compound, its crystal structure has been refined within the framework of both centrosymmetric P63/mmc (No. 194) and non-centrosymmetric P63mc (No. 186) space groups. The analysis of refinement results allows to understand microscopic mechanism of appearance ferroelectric properties in strontium hexaferrites., This project has received funding from the EU – H2020 research and innovation programme (support of the scientific infrastructure and scientific mobility for measurements in EU countries) under grant agreement No 654360 having benefitted from the access provided by CSIC/ICMAB in Barcelona (ES) and by CEA/LLB in Paris (FR) within the framework of the NFFA – Europe Transnational Access Activity. The work was support by the Russian Science Foundation (Agreement No. 19-19-00694 of 06 May 2019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal and magnetic structures, magnetic and ferroelectric properties of strontium ferrite partially substituted with In ions

  • Turchenko, Vitalii
  • Kostishin, V.G.
  • Trukhanov, Sergei
  • Damay, Francoise
  • Porcher, Florence
  • Balasoiu, Maria
  • Lupu, Nicoleta
  • Bozzo, Bernat
  • Fina, Ignasi
  • Trukhanov, Alex
  • Waliszewski, Janusz
  • Recko, Katarzyna
  • Polosan, Silviu
The influence of temperature factor to crystal structure as well as magnetic and electric properties ofstrontium hexaferrite partially substituted with diamagnetic indium ions has been investigated. Ferro-electric properties have been found out inSrFe11:9In0:1O19compound that contradicts to conventionalopinion, which describe its crystal structure within the framework of centrosymmetric space groupP63=mmc(No. 194). For determination features of the crystal structure, which are responsible for ferroelectricproperties of strontium hexaferrite, have been carried out neutron diffraction measurements with highresolution in temperature range from 1.5 to 740 K. The analysis of hexaferrite structure has beenexecuted within the framework both centrosymmetric and non-centrosymmetric space group. Values ofcoefficients of magneto crystalline anisotropy at 5 and 300 K and influence of ambient temperature tolinear size of magnetic regions have been determined from magnetic measurements., The work was support by the Russian Science Foundation(Agreement No. 19-19-00694 of 06 May 2019). This project hasreceived funding from the EU - H2020 research and innovationprogramme under grant agreement No 654360 having benefittedfrom the access provided by CSIC/ICMAB in Barcelona (ES) and byCEA/LLB in Paris (FR) within the framework of the NFFAeEuropeTransnational Access Activity. (European grants to support theinfrastructure of European centres of collective usage and mobileactivity of researchers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Segregation scheme of indium in AlGaInAs nanowire shells

  • Francaviglia, Luca
  • Tütüncüoglu, Gözde
  • Martí-Sànchez, Sara
  • Russo, Enrico di
  • Escobar Steinvall, Simon
  • Segura-Ruiz, Jaime
  • Potts, Heidi
  • Friedl, Martin
  • Rigutti, Lorenzo
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
Quaternary alloys enable the independent optimization of different semiconductor properties, such as the separate tuning of the band gap and the lattice constant. Nanowire core-shell structures should allow a larger range of compositional tuning as strain can be accommodated in a more effective manner than in thin films. Still, the faceted structure of the nanowire may lead to local segregation effects. Here, we explore the incorporation of indium in AlGaAs shells up to 25%. In particular, we show the effect of In incorporation on the energy shift of the AlGaInAs single-photon emitters present in the shell. We observe a redshift up to 300 meV as a function of the group-III site fraction of In. We correlate the shift with segregation at the nanoscale. We find evidence of the segregation of the group-III elements at different positions in the nanowire, not observed before. We propose a model that takes into account the strain distribution in the nanowire shell and the adatom diffusion on the nanowire facets to explain the observations. This work provides novel insights on the segregation phenomena necessary to engineer the composition of multidinary alloys., JSR thanks the European H2020 for funding through grant LIMQUET. EDR and LR thank Labex EMC3 AQURATE (French ANR). SMS acknowledges funding from “Programa Internacional de Becas ‘la Caixa’-Severo Ochoa.” JA and SMS acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant No. SEV-2013-0295) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 654360 NFFA-Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The new FAST module: A portable and transparent add-on module for time-resolved investigations with commercial scanning probe microscopes

  • Dri, Carlo
  • Panighel, Mirko
  • Tiemann, Daniel
  • Patera, Laerte L.
  • Troiano, Giulia
  • Fukamori, Yves
  • Knoller, Fabian
  • Lechner, Barbara A.J.
  • Cautero, Giuseppe
  • Giuressi, Dario
  • Comelli, Giovanni
  • Fraxedas, J.
  • Africh, Cristina
  • Esch, Friedrich
Time resolution is one of the most severe limitations of scanning probe microscopies (SPMs), since the typical image acquisition times are in the order of several seconds or even few minutes. As a consequence, the characterization of dynamical processes occurring at surfaces (e.g. surface diffusion, film growth, self-assembly and chemical reactions) cannot be thoroughly addressed by conventional SPMs. To overcome this limitation, several years ago we developed a first prototype of the FAST module, an add-on instrument capable of driving a commercial scanning tunneling microscope (STM) at and beyond video rate frequencies. Here we report on a fully redesigned version of the FAST module, featuring improved performance and user experience, which can be used both with STMs and atomic force microscopes (AFMs), and offers additional capabilities such as an atom tracking mode. All the new features of the FAST module, including portability between different commercial instruments, are described in detail and practically demonstrated., The FAST project has received funding from the EU-H2020 research and innovation programme under grant agreement no. 654360 NFFA-Europe. The ICN2 is funded by the CERCA program/ Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa program of MINECO (Grant SEV-2017-0706). We acknowledge S. Gottlieb, M. Fernández-Regúlez and F. Pérez-Murano for providing us with the silicon and block copolymer samples. Work at TUM was supported by the Deutsche Forschungsgemeinschaft (Research grants ES 349/1-2 and HE 3454/18-2). BAJL acknowledges a Research Fellowship from the Alexander von Humboldt Foundation and a Marie Skłodowska-Curie Individual Fellowship under grant ClusterDynamics (no. 703972) from the EU Horizon 2020 Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of polarity in nonplanar semiconductor nanostructures

  • Mata, Maria de la
  • Zamani, Reza
  • Martí-Sànchez, Sara
  • Eickhoff, Martin
  • Xiong, Qihua
  • Fontcuberta i Morral, Anna
  • Caroff, Philippe
  • Arbiol, Jordi
The lack of mirror symmetry in binary semiconductor compounds turns them into polar materials, where two opposite orientations of the same crystallographic direction are possible. Interestingly, their physical properties (e.g., electronic or photonic) and morphological features (e.g., shape, growth direction, and so forth) also strongly depend on the polarity. It has been observed that nanoscale materials tend to grow with a specific polarity, which can eventually be reversed for very specific growth conditions. In addition, polar-directed growth affects the defect density and topology and might induce eventually the formation of undesirable polarity inversion domains in the nanostructure, which in turn will affect the photonic and electronic final device performance. Here, we present a review on the polarity-driven growth mechanism at the nanoscale, combining our latest investigation with an overview of the available literature highlighting suitable future possibilities of polarity engineering of semiconductor nanostructures. The present study has been extended over a wide range of semiconductor compounds, covering the most commonly synthesized III–V (GaN, GaP, GaAs, GaSb, InN, InP, InAs, InSb) and II–VI (ZnO, ZnTe, CdS, CdSe, CdTe) nanowires and other free-standing nanostructures (tripods, tetrapods, belts, and membranes). This systematic study allowed us to explore the parameters that may induce polarity-dependent and polarity-driven growth mechanisms, as well as the polarity-related consequences on the physical properties of the nanostructures., ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. S.M.S. acknowledges funding from “Programa Internacional de Becas “la Caixa”-Severo Ochoa”. The HAADF-STEM experiments were conducted in the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragon-Universidad de Zaragoza. A.F.i.M. thanks SNSF for funding through the NCCR QSIT. This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 654360 NFFA-Europe. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 823717 – ESTEEM3., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Throughput Cell Motility Studies on Surface-Bound Protein Nanoparticles with Diverse Structural and Compositional Characteristics

  • Tatkiewicz, Witold I.
  • Seras Franzoso, Joaquin
  • García Fruitós, Elena
  • Vazquez, Esther
  • Kyvik Ruiz, Adriana
  • Ventosa, Nora
  • Guasch, Judit
  • Villaverde, Antonio
  • Veciana, Jaume
  • Ratera, Immaculada
Eighty areas with different structural and compositional characteristics made of bacterial inclusion bodies formed by the fibroblast growth factor (FGF-IBs) were simultaneously patterned on a glass surface with an evaporation-assisted method that relies on the coffee-drop effect. The resulting surface patterned with these protein nanoparticles enabled to perform a high-throughput study of the motility of NIH-3T3 fibroblasts under different conditions including the gradient steepness, particle concentrations, and area widths of patterned FGF-IBs, using for the data analysis a methodology that includes “heat maps”. From this analysis, we observed that gradients of concentrations of surface-bound FGF-IBs stimulate the total cell movement but do not affect the total net distances traveled by cells. Moreover, cells tend to move toward an optimal intermediate FGF-IB concentration (i.e., cells seeded on areas with high IB concentrations moved toward areas with lower concentrations and vice versa, reaching the optimal concentration). Additionally, a higher motility was obtained when cells were deposited on narrow and highly concentrated areas with IBs. FGF-IBs can be therefore used to enhance and guide cell migration, confirming that the decoration of surfaces with such IB-like protein nanoparticles is a promising platform for regenerative medicine and tissue engineering., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Uptake of Sb(V) by Nano Fe3O4-Decorated Iron Oxy-Hydroxides

  • Simeonidis, Konstantinos
  • Kalaitzidou, Kyriaki
  • Kaprara, Efthimia
  • Mitraka, Georgia
  • Asimakidou, Theopoula
  • Balcells, Lluis
  • Mitrakas, Manassis
The presence of antimony in water remains a major problem for drinking water technology, defined by the difficulty of available adsorbents to comply with the very low regulation limit of 5 µg/L for the dominant Sb(V) form. This study attempts to develop a new class of water adsorbents based on the combination of amorphous iron oxy-hydroxide with Fe3O4 nanoparticles and optimized to the sufficient uptake of Sb(V). Such a Fe3O4/FeOOH nanocomposite is synthesized by a two-step aqueous precipitation route from iron salts under different oxidizing and acidity conditions. A series of materials with various contents of Fe3O4 nanoparticles in the range 0–100 wt % were prepared and tested for their composition, and structural and morphological features. In order to evaluate the performance of prepared adsorbents, the corresponding adsorption isotherms, in the low concentration range for both Sb(III) and Sb(V), were obtained using natural-like water. The presence of a reducing agent such as Fe3O4 results in the improvement of Sb(V) uptake capacity, which is found around 0.5 mg/g at a residual concentration of 5 µg/L. The intermediate reduction of Sb(V) to Sb(III) followed by Sb(III) adsorption onto FeOOH is the possible mechanism that explains experimental findings., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Can atomic buckling control a chemical reaction? The case of Dehydrogenation of Phthalocyanine Molecules on GdAu2/Au(111)

  • Farnesi Camellone, Matteo
  • Correa, Ana
  • Barragán, Ana
  • Pedio, Maddalena
  • Fabris, Stefano
  • Cepek, Cinzia
  • Vitali, Lucia
The efficiency of chemical reactions on surfaces is traditionally related to their lattice structures. The periodic out-of-plane lattice distortions of supported two-dimensional layers offer an alternative strategy to surface functionalization, scarcely investigated so far. Here, we show that the variable buckling geometry of a GdAu2 Moiré overlayer supported on the Au(111) surface exposes specific single-atom sites that control the dehydrogenation process of phthalocyanine (H2-PC) molecules, limiting their reactivity to about 1/3 of the monolayer. The lattice mismatch between the substrate and the alloy layer leads to the previously reported outward displacement of distinct Gd sites. We show that these atomic sites promote the selective dehydrogenation of H2-PC molecules., This project has received funding from the EU-H2020 research and innovation program (grant number 654360) having benefitted from the access provided by Istituto Officina dei Materiali in Trieste (Italy) within the framework of the NFFA Transnational Access Activity. L.V., A.B., and A.C. acknowledge the economic support of the Spanish Ministry of Economy, Industry and Competitiveness (grant number MAT2016-78293-C6-5-R) and Prof. S. Modesti for his help with the electronics. A.B. acknowledges Vicerrectorado de Investigacion of the University of the Basque Country (UPV/ EHU) for the PhD fellowship (2016)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functionalization of polyacrylamide for nanotrapping positively charged biomolecules

  • Davydova, Nadejda
  • Rodríguez Martínez, Xabier
  • Blazquez, Carlos
  • Gómez Rodríguez, Andrés
  • Perevyazko, Igor
  • Guasch, Judit
  • Sergeev, Vladimir
  • Laukhina, Elena
  • Ratera, Immaculada
  • Veciana, Jaume
Engineering new materials which are capable of trapping biomolecules in nanoscale quantities, is crucial in order to achieve earlier diagnostics in different diseases. This article demonstrates that using free radical copolymerization, polyacrylamide can be successfully functionalized with specific synthons for nanotrapping positively charged molecules, such as numerous proteins, through electrostatic interactions due to their negative charge. Specifically, two functional random copolymers, acrylamide/acrylic acid (1) and acrylamide/acrylic acid/N-(pyridin-4-yl-methyl)acrylamide (2), whose negative net charges differ in their water solutions, were synthetized and their ability to trap positively charged proteins was studied using myoglobin as a proof-of-concept example. In aqueous solutions, copolymer 1, whose net charge for a 100 chain fragment (QpH 6/M) is −1.323 × 10−3, interacted with myoglobin forming a stable monodisperse nanosuspension. In contrast, copolymer 2, whose value of QpH 6/M equals −0.361 × 10−3, was not able to form stable particles with myoglobin. Nevertheless, thin films of both copolymers were grown using a dewetting process, which exhibited nanoscale cavities capable of trapping different amounts of myoglobin, as demonstrated by bimodal AFM imaging. The simple procedures used to build protein traps make this engineering approach promising for the development of new materials for biomedical applications where trapping biomolecules is required., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D organic nanofabrics: plasma-assisted synthesis and antifreezing behavior of superhydrophobic and lubricant-infused slippery surfaces

  • Alcaire, Maria
  • López-Santos, Carmen
  • Aparicio, Francisco J.
  • Sánchez-Valencia, J. R.
  • Obrero, José M.
  • Saghi, Zineb
  • Rico, Víctor J.
  • Fuente, Germán F. de la
  • González-Elipe, Agustín R.
  • Barranco, Ángel
  • Borrás, Ana
Herein, we present the development of supported organic nanofabrics formed by a conformal polymer-like interconnection of small-molecule organic nanowires and nanotrees. These organic nanostructures are fabricated by a combination of vacuum and plasma-assisted deposition techniques to generate step by step, single-crystalline organic nanowires forming one-dimensional building blocks, organic nanotrees applied as three-dimensional templates, and the polymer-like shell that produces the final fabric. The complete procedure is carried out at low temperatures and is compatible with an ample variety of substrates (polymers, metal, ceramics; either planar or in the form of meshes) yielding flexible and low solid-fraction three-dimensional nanostructures. The systematic investigation of this progressively complex organic nanomaterial delivers key clues relating their wetting, nonwetting, and anti-icing properties with their specific morphology and outer surface composition. Water contact angles higher than 150° are attainable as a function of the nanofabric shell thickness with outstanding freezing-delay times (FDT) longer than 2 h at −5 °C. The role of the extremely low roughness of the shell surface is settled as a critical feature for such an achievement. In addition, the characteristic interconnected microstructure of the nanofabrics is demonstrated as ideal for the fabrication of slippery liquid-infused porous surfaces (SLIPS). We present the straightforward deposition of the nanofabric on laser patterns and the knowledge of how this approach provides SLIPS with FDTs longer than 5 h at −5 °C and 1 h at −15 °C., We thank the AEI, MINECO (MAT2016-79866-R), and Consejerıa de Economia y Conocimiento de la Junta de Andalucia (US-1263142), the EU through cohesion fund and FEDER 20014-2020 programs and H2020 Phobic2Ice project(ref 690819) for financial support. This project has received funding from the EU-H2020 research and innovation program under the grant agreement No. 654360 (Id285) having benefitted from the access provided by CEA-Leti in Grenoble (France) within the framework of the NFFA-Europe Transnational Access Activity. F.J.A. and J.R.S.-V. acknowledge the Juan de la Cierva and Ramon y Cajal Programs, respectively. C.L.-S. and J.R.S.-V. thank the University of Seville through the VI PPIT-US., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced stability of perovskite solar cells incorporating dopant-free Crystalline spiro-OMeTAD layers by vacuum sublimation

  • Barranco, Ángel
  • López-Santos, Carmen
  • Idígoras, Jesús
  • Aparicio, Francisco J.
  • Obrero-Pérez, José M.
  • López-Flores, Víctor
  • Contreras-Bernal, Lidia
  • Rico, Víctor J.
  • Ferrer, F. J.
  • Espinós, J.P.
  • Borrás, Ana
  • Anta, Juan A.
  • Sánchez-Valencia, J. R.
The main handicap still hindering the eventual exploitation of organometal halide perovskite-based solar cells is their poor stability under prolonged illumination, ambient conditions, and increased temperatures. This article shows for the first time the vacuum processing of the most widely used solid-state hole conductor (SSHC), i.e., the Spiro-OMeTAD [2,2′,7,7′-tetrakis (N,N-di-p-methoxyphenyl-amine) 9,9′-spirobifluorene], and how its dopant-free crystalline formation unprecedently improves perovskite solar cell (PSC) stability under continuous illumination by about two orders of magnitude with respect to the solution-processed reference and after annealing in air up to 200 °C. It is demonstrated that the control over the temperature of the samples during the vacuum deposition enhances the crystallinity of the SSHC, obtaining a preferential orientation along the π–π stacking direction. These results may represent a milestone toward the full vacuum processing of hybrid organic halide PSCs as well as light-emitting diodes, with promising impacts on the development of durable devices. The microstructure, purity, and crystallinity of the vacuum sublimated Spiro-OMeTAD layers are fully elucidated by applying an unparalleled set of complementary characterization techniques, including scanning electron microscopy, X-ray diffraction, grazing-incidence small-angle X-ray scattering and grazing-incidence wide-angle X-ray scattering, X-ray photoelectron spectroscopy, and Rutherford backscattering spectroscopy., The authors thank the “Agencia Estatal de Investigación”, “Consejería de Economía y Conocimiento de la Junta de Andalucía” (US‐1263142), “Ministerio de Economía y Competitividad” (MAT2016‐79866‐R, MAT2013‐42900‐P, FPA2016‐77689‐C2‐1‐R, and MAT2016‐76892‐C3‐2‐R) and the European Union (EU) through cohesion fund and FEDER 2014‐2020 programs for financial support. J.R.S.‐V. and A.B. acknowledge the EU project PlasmaPerovSol and funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement ID 661480. J.R.S.‐V‐ and M.C.L.‐S. thank the University of Seville through the VI “Plan Propio de Investigación y Transferencia de la US” (VI PPIT‐US). This research has received funding from the EU‐H2020 research and innovation programme under Grant Agreement No. 654360 having benefitted from the access provided by Technische Universität Graz at Elettra—TUG in Trieste (IT) within the framework on the NFFA (Nanoscience Foundries & Fine Analysis) Europe Transnational Access Activity. F.J.A. and J.R.S.‐V. acknowledge the “Juan de la Cierva” and “Ramon y Cajal” national programs, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the period of femtosecond laser induced surface structures in steel: From angled incidence to quill writing

  • Fuentes-Edfuf, Yasser
  • Sánchez-Gil, José A.
  • Garcia-Pardo, Marina
  • Serna, Rosalía
  • Tsibidis, G. D.
  • Giannini, V.
  • Solís Céspedes, Javier
  • Siegel, Jan
8 pags., 8 figs., 1 app., Exposure of metal surfaces to multiple ultrashort laser pulses under certain conditions leads to the formation of well-defined periodic surface structures. We show how the period of such structures in steel can be tuned over a wide range by controlling the complex interaction mechanisms triggered in the material. Amongst the different irradiation parameters that influence the properties of the induced structures, the angle of incidence of the laser beam occupies a prominent role. We present an experimental and theoretical investigation of this angle dependence in steel upon irradiation with laser pulses of 120¿fs duration and 800¿nm wavelength, while moving the sample at constant speed. Our findings can be grouped into two blocks. First, we observe the spatial coexistence of two different ripple periods at the steel surface, both featuring inverse scaling upon angle increase, which are related to forward and backward propagation of surface plasmon polaritons. To understand the underlying physical phenomena, we extend a recently developed model that takes into account quantitative properties of the surface roughness to the case of absorbing metals (large imaginary part of the dielectric function), and obtain an excellent match with the experimentally observed angle dependence. As second important finding, we observe a quill writing effect, also termed non-reciprocal writing, in form of a significant change of the ripple period upon reversing the sample movement direction. This remarkable phenomenon has been observed so far only inside dielectric materials and our work underlines its importance also in laser surface processing. We attribute the origin of symmetry breaking to the non-symmetric micro- and nanoscale roughness induced upon static multiple pulse irradiation, leading to non-symmetric modification of the wavevector of the coupled surface plasmon polariton., JSi, JSo and YF acknowledge the Spanish Ministry of Science,Innovation and Universities forfinancial support through researchgrant UDiSON (TEC2017-82464-R), the European Commission for grantLiNaBioFluid (FETOPEN 665337) and Consejo Superior deInvestigaciones Científicas for the project INTRAMURALES201850E057. RS acknowledges thefinancial support from the Spanishproject RTI2018-096498-B-I00 (MCIU/AEI/FEDER, UE). VG and JASGacknowledge the Spanish Ministerio de Economia y Competitividad forfinancial support through the grants LENSBEAM (FIS2015-69295-C3-2-P) and NANOTOPO (FIS2017-91413-EXP), and also Consejo Superiorde Investigaciones Científicas (INTRAMURALES 201750I039). G.D.T.acknowledgesfinancial support from Nanoscience Foundries and FineAnalysis (NFFA)–Europe H2020-INFRAIA-2014-2015 (under Grantagreement No 654360) and COST Action TUMIEE (supported by COST-European Cooperation in Science and Technology)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Three-dimensional superconducting nanohelices grown by He+-focused-ion-beam direct writing

  • Córdoba, Rosa
  • Mailly, Dominique
  • Rezaev, Roman O.
  • Smirnova, Ekaterina I.
  • Schmidt, Oliver G.
  • Fomin, Vladimir M.
  • Zeitler, U.
  • Guillamón, Isabel
  • Suderow, Hermann
  • Teresa, José María de
Novel schemes based on the design of complex three-dimensional (3D) nanoscale architectures are required for the development of the next generation of advanced electronic components. He+ focused-ion-beam (FIB) microscopy in combination with a precursor gas allows one to fabricate 3D nanostructures with an extreme resolution and a considerably higher aspect ratio than FIB-based methods, such as Ga+ FIB-induced deposition, or other additive manufacturing technologies. In this work, we report the fabrication of 3D tungsten carbide nanohelices with on-demand geometries via controlling key deposition parameters. Our results show the smallest and highest-densely packed nanohelix ever fabricated so far, with dimensions of 100 nm in diameter and aspect ratio up to 65. These nanohelices become superconducting at 7 K and show a large critical magnetic field and critical current density. In addition, given its helical 3D geometry, fingerprints of vortex and phase-slip patterns are experimentally identified and supported by numerical simulations based on the time-dependent Ginzburg–Landau equation. These results can be understood by the helical geometry that induces specific superconducting properties and paves the way for future electronic components, such as sensors, energy storage elements, and nanoantennas, based on 3D compact nanosuperconductors., This work was supported by the financial support from Spanish Ministry of Economy and Competitiveness through the projects MAT2017-82970-C2-2-R, PIE201760E027, including FEDER funding, FIS2017-84330-R, MDM-2014-0377, EU ERC (grant agreement no. 679080), COST grant no. CA16128, and STSM grant 41199 for V.M.F. from COST Action CA16218, from the EU-H2020 research and innovation programme under grant agreement no. 654360 NFFA-Europe, from regional Gobierno de Aragon (grants E13_17R) with European Social Fund (Construyendo Europa desde Aragon) and Comunidad de Madrid through project Nanofrontmag-CM (grant no. S2013/ MIT-2850). Authors acknowledge the LMA-INA for offering access to their instruments and expertise and the use of Servicio General de Apoyo a la Investigacion-SAI, Universidad de Zaragoza, particularly the Servicio de Medidas Fisicas. The support of the German Research Foundation (DFG) via grant FO 956/5-1 is gratefully acknowledged. Authors acknowledge the Center for Information Services and High Performance Computing (ZIH) at TU Dresden for offering access to the HPC system. This work was supported by HFML-RU/NWO-I, member of the European Magnetic Field Laboratory (EMFL). It is part of the research program no. 132 “High Field Magnet Laboratory: a global player in science in high magnetic fields” financed by The Netherlands Organisation for Scientific Research (NWO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deep UV laser induced periodic surface structures on silicon formed by self-organization of nanoparticles

  • Zazo, Raúl
  • Solís Céspedes, Javier
  • Sánchez-Gil, José A.
  • Ariza, Rocío
  • Serna, Rosalía
  • Siegel, Jan
7 pags., 6 figs., 1 tab., We have investigated the formation of laser-induced periodic surface structures (LIPSS or “ripples”) on silicon upon excitation with p-polarized excimer laser pulses in the deep ultraviolet region (λ = 193 nm, 20 ns). Well-pronounced ripples with a period close to the laser wavelength were observed for pulse numbers N ≥ 100, and the ripple period increased with the angle of incidence. While these results seem to be qualitatively consistent with the standard Sipe-theory, we observed a fundamentally different ripple formation mechanism and ripple morphology. At low pulse numbers, isolated nanoparticles with a size of a few tens of nanometers are observed at the silicon surface, which then start to agglomerate in 2D and self-organize to form ripples with a very shallow modulation depth as the pulse number increases. Employing a recently developed plasmonic model based on the propagation of a surface plasmon polariton on a rough surface, we demonstrate excellent quantitative agreement of the evolution of the ripple period with incidence angle. Finally, we show that surface regions exposed to lower laser fluence feature micro- and nanopores, which give rise to pronounced photoluminescence (PL) emission in the visible spectral region, as opposed to the nanoparticle-based ripples not showing PL., JSi,JSo, and RS acknowledge financial support through the national research grants UDiSON (TEC2017-82464-R) and SENSIL (RTI2018096498-B-I00) from the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF), as well as the Consejo Superior de Investigaciones Científicas for the intramurales project (201850E057) and PICS project SAMUL (2018FR0026) jointly with the CNRS, France. The authors also acknowledge pre-doctoral grants to RZa and RAr awarded by the regional government of Madrid and financed by the European Social Fund (ESF) and the national “Iniciativa de Empleo Juvenil” (YEI). This project has received funding from the EU-H2020 research and innovation programme under grant agreement No 654360 NFFA-Europe from the access provided by FORTH in Heraklion (Greece) within the framework of the NFFA Transnational Access Activity. The authors acknowledge this access with technician support at the FORTH facilities within NFFA project ID 507. JASG acknowledges the Spanish MCIU/AEI/FEDER for financial support through the grants MELODIA (PGC2018-095777-BC21) and NANOTOPO (FIS2017-91413-EXP)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-assembly morphology of block copolymers in sub-10 nm topographical guiding patterns

  • Gottlieb, S.
  • Rösner, B.
  • Evangelio, Laura
  • Fernández-Regúlez, Marta
  • Nogales, Aurora
  • García-Gutiérrez, Mari Cruz
  • Keller, T.F.
  • Fraxedas, J.
  • Ezquerra, Tiberio A.
  • David, C.
  • Perez Murano, Francesc X.
11 pags., 5 figs.-- Open Access funded by Creative Commons Atribution Licence 3.0, In this paper, we investigate the directed self-assembly of block copolymers in topographical guiding patterns with feature sizes in the range of the block copolymer half-pitch. In particular, we present the self-assembly of an 11.7 nm half-pitch block copolymer in sub-10 nm resolution guiding patterns fabricated by the direct e-beam exposure of hydrogen silsesquioxane (HSQ). One result of this analysis is that the block copolymer self-assembles such that the guiding pattern features form part of the 3-D architecture of the film. We are capable of determining a shift in the block copolymer pitch as a function of the guiding pattern pitch with sub-nanometer accuracy by means of both real-space (AFM, SEM) and reciprocal-space techniques (GISAXS). An interesting result is that the block copolymer self-assembly in the studied structures depends on the guiding pattern pitch rather than on the trench width as in standard graphoepitaxy. We analyze the structures by means of a free energy model and present both theoretical and experimental evidence of a narrower processing window for such kind of guiding patterns than for regular directed self-assembly using wide topographical guiding patterns, and discuss the origin of this effect. We argue that chain deformation in the vicinity of the top cap of the guiding pattern feature is responsible for an increase of the free energy of the ordered state, which leads to a smaller energy difference between the defect-free and defective self-assembly than that for the observed self-assembly morphology., This project is partially funded by the EU project NFFA (Nanoscience Foundries and Fine Analysis) (grant agreement no. 654360) and by MICINN through the Nanointegra project (TEC2015-69864-R). The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa program of MICINN (SEV-2013-0295).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intrinsic piezoelectric characterization of BiFeO3 nanofibers and its implications for energy harvesting

  • Queraltó, Albert
  • Frohnhoven, Robert
  • Mathur, Sanjay
  • Gómez Rodríguez, Andrés
Perovskite oxide-based ferroelectrics are interesting in energy applications due to their electrical and optical properties. Nanostructuring opens new paths to increase the surface-to-volume ratio, porosity, and mechanical flexibility as compared with bulk materials, improving and tuning properties associated with piezoelectricity, ferroelectricity, piezoelectrochemistry, electrical conductivity, and catalysis. To elucidate the impact of nanostructuration, in piezoelectricity, we characterized one of the most promising perovskite materials, bismuth ferrite (BiFeO3), in the form of 1D nanostructures, namely nanofibers. A set of BiFeOx precursor nanofibers were electrospun from a chemical sol and calcined at 600 °C to obtain the final BiFeO3 nanofiber structure. By scanning the nanofiber sample, the piezo-generated charge at the nanoscale level was studied by Direct Piezoelectric Force Microscopy (DPFM). Our results report that the direct piezoelectric coefficient of the polycrystalline nanofibers is d33 = 11 pC/N, which corresponds to a smaller value as compared with epitaxial films, 22 pC/N for 60 nm films and 43 pC/N for 400 nm films. The diminishing of piezoelectric property characteristics is mainly attributed to the impact of nanostructuration. The nanofibers impose another clamping factor that decreases the BiFeO3 piezoelectric property, reducing their use as energy harvesters in favor of catalytic applications, water splitting, or photovoltaic applications., A. Queraltó appreciates the support of the Alexander von Humboldt foundation and the German Federal Ministry for Education and Research, supporting his postdoctoral research (AVH 1184642). Program under grant agreement No. 654360, having benefitted from the access provided by ICMAB-CSIC in Barcelona within the framework of the NFFA-Europe. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496) Transnational Access Activity. A.Q., R.F., and S.M. gratefully acknowledge the financial support from University of Cologne., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Supported Porous Nanostructures Developed by Plasma Processing of Metal Phthalocyanines and Porphyrins

  • Obrero-Pérez, José M.
  • Filippin, Alejandro N.
  • Alcaire, María
  • Sánchez-Valencia, J. R.
  • Jacob, Martin
  • Matei, Constantin
  • Aparicio, Francisco J.
  • Macías-Montero, M.
  • Rojas, T. Cristina
  • Espinós, J.P.
  • Saghi, Zineb
  • Barranco, Ángel
  • Borrás, Ana
The large area scalable fabrication of supported porous metal and metal oxide nanomaterials is acknowledged as one of the greatest challenges for their eventual implementation in on-device applications. In this work, we will present a comprehensive revision and the latest results regarding the pioneering use of commercially available metal phthalocyanines and porphyrins as solid precursors for the plasma-assisted deposition of porous metal and metal oxide films and three-dimensional nanostructures (hierarchical nanowires and nanotubes). The most advanced features of this method relay on its ample general character from the point of view of the porous material composition andmicrostructure,mild deposition and processing temperature and energy constrictions and, finally, its straightforward compatibility with the direct deposition of the porous nanomaterials on processable substrates and device-architectures. Thus, taking advantage of the variety in the composition of commercially available metal porphyrins and phthalocyanines, we present the development of metal and metal oxides layers including Pt, CuO, Fe2O3, TiO2, and ZnO with morphologies ranging from nanoparticles to nanocolumnar films. In addition, we combine this method with the fabrication by low-pressure vapor transport of single-crystalline organic nanowires for the formation of hierarchical hybrid organic@metal/metal-oxide and @metal/metal-oxide nanotubes. We carry out a thorough characterization of the films and nanowires using SEM, TEM, FIB 3D, and electron tomography. The latest two techniques are revealed as critical for the elucidation of the inner porosity of the layers., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generation, control and erasure of dual LIPSS in germanium with fs and ns laser pulses

  • Casquero, Noemí
  • Fuentes-Edfuf, Yasser
  • Zazo, Raúl
  • Solís Céspedes, Javier
  • Siegel, Jan
15 pags., 6 figs.,, Laser-induced periodic surface structures (LIPSS) can readily be fabricated in virtually all types of materials and benefit from an efficient parallel patterning strategy that exploits self-organization. The wide range of different LIPSS types with different spatial scales and symmetries is continuously growing, addressing numerous of applications. Here, we report on the formation of two fundamentally different types of LIPSS on germanium upon exposure to femtosecond laser pulses (λ=800 nm, 130 fs), featuring different periods and orthogonal orientations. On the one hand, the well-known low-spatial frequency LIPSS (LSFL) with a period ≈λ and perpendicular orientation to the laser polarization are formed, which can be extended homogeneously in 2D by sample scanning. Additionally, extremely smooth ripples with a period ≈λ /2 and parallel orientation were generated at lower pulse numbers. We show that this new kind of ripples, named HSFL-∥, can be superimposed onto LSFL by increasing the pulse number, forming complex dual LIPSS with nanohill-like morphology. While exposure to multiple nanosecond laser pulses is found to trigger also the formation of LSFL, HSFL-∥ cannot be formed under these conditions, which points out the role of ultrafast excitation in the formation of the latter. By performing time-resolved reflectivity measurements, we are able to resolve the melting and solidification dynamics, revealing melting of a very shallow surface layer (< 20 nm) and melt durations of a few ns for both pulse durations pulses at the fluences employed for LIPSS formation. Finally, we demonstrate erasure of both types of LIPSS by exposure to single nanosecond pulses at high fluences, which paves the way for erasable multi-level data storage.Laser-induced periodic surface structures (LIPSS) can readily be fabricated in virtually all types of materials and benefit from an efficient parallel patterning strategy that exploits self-organization. The wide range of different LIPSS types with different spatial scales and symmetries is continuously growing, addressing numerous of applications. Here, we report on the formation of two fundamentally different types of LIPSS on germanium upon exposure to femtosecond laser pulses (λ=800 nm, 130 fs), featuring different periods and orthogonal orientations. On the one hand, the well-known low-spatial frequency LIPSS (LSFL) with a period ≈λ and perpendicular orientation to the laser polarization are formed, which can be extended homogeneously in 2D by sample scanning. Additionally, extremely smooth ripples with a period ≈λ /2 and parallel orientation were generated at lower pulse numbers. We show that this new kind of ripples, named HSFL-∥, can be superimposed onto LSFL by increasing the pulse number, forming complex dual LIPSS with nanohill-like morphology. While exposure to multiple nanosecond laser pulses is found to trigger also the formation of LSFL, HSFL-∥ cannot be formed under these conditions, which points out the role of ultrafast excitation in the formation of the latter. By performing time-resolved reflectivity measurements, we are able to resolve the melting and solidification dynamics, revealing melting of a very shallow surface layer (< 20 nm) and melt durations of a few ns for both pulse durations pulses at the fluences employed for LIPSS formation. Finally, we demonstrate erasure of both types of LIPSS by exposure to single nanosecond pulses at high fluences, which paves the way for erasable multi-level data storage., The authors are grateful to S. Sanchez-Cortes at Instituto de Estructura de la Materia of the CSIC for performing micro-Raman measurements. JSi and JSo acknowledge financial support through the national research grant UDiSON (TEC2017-82464-R) from the Spanish Research Agency(AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF), as well as the Consejo Superior de Investigaciones Científicas for the intramurales project (201850E057). The authors acknowledge a pre-doctoral fellowship from the MICINN for NCa and a pre-doctoral grant for RZa from the regional government of Madrid and financed by the European Social Fund (ESF) and the national “Iniciativa de Empleo Juvenil” (YEI). The authors acknowledge EU-H2020 grant agreement No 654360 (NFFA-Europe) and the corresponding access to SEM and AFM facilities at FORTH within NFFA project ID 507., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stable anchoring of bacteria-based protein nanoparticles for surface enhanced cell guidance

  • Martínez Miguel, Marc
  • Kyvik Ruiz, Adriana
  • Ernst, Lena M.
  • Martínez Moreno, Albert
  • Cano Garrido, Olivia
  • García Fruitós, Elena
  • Vazquez, Esther
  • Ventosa, Nora
  • Guasch, Judit
  • Veciana, Jaume
  • Villaverde, Antonio
  • Ratera, Immaculada
In tissue engineering, biological, physical, and chemical inputs have to be combined to properly mimic cellular environments and successfully build artificial tissues which can be designed to fulfill different biomedical needs such as the shortage of organ donors or the development of in vitro disease models for drug testing. Inclusion body-like protein nanoparticles (pNPs) can simultaneously provide such physical and biochemical stimuli to cells when attached to surfaces. However, this attachment has only been made by physisorption. To provide a stable anchoring, a covalent binding of lactic acid bacteria (LAB) produced pNPs, which lack the innate pyrogenic impurities of Gram-negative bacteria like Escherichia coli, is presented. The reported micropatterns feature a robust nanoscale topography with an unprecedented mechanical stability. In addition, they are denser and more capable of influencing cell morphology and orientation. The increased stability and the absence of pyrogenic impurities represent a step forward towards the translation of this material to a clinical setting., The authors are grateful for the financial support received from MOTHER (MAT2016-80826-R) granted by the DGI (Spain), GenCat (SGR-918 and SGR-229) financed by DGR (Catalunya), the Spanish Ministry of Economy and Competitiveness (MINECO) through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), the COST Action CA15126 Between Atom and Cell, Fundació La Marató de TV3 (Nr. 201812), the European Social Fund, and EU to J. V., A. V., and I. R. (H2020-INFRAIA-2014-2015; NFFA-654360). J. G. is also grateful to MINECO for a “Ramón y Cajal” fellowship as well as to the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck Institute for Medical Research (Heidelberg, Germany). This study has been also supported by the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), an initiative funded by the VI National R&D&I Plan, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors also acknowledge Micalis Institute, INRA, France that kindly provided us the strain clpP− htrA−-NZ9000 (patent Nr. EP1141337B1/US6994997B1). M. M. M. and O. C. G. received a PhD fellowship from MECD (FPU) and E. G. F. a post-doctoral fellowship from INIA (DOC-INIA, MINECO). A. V. received an ICREA ACADEMIA Award. This work has been developed under the biochemistry and biomedicine program of Universitat Autònoma de Barcelona (UAB). The characterization of the pNPs has been performed by the ICTS “NANBIOSIS”, more specifically by the Biomaterial Processing and Nanostructuring Unit (U6), Unit of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN) located at the Institute of Materials Science of Barcelona (ICMAB-CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of spin–orbit torques by interface engineering in topological insulator heterostructures

  • Bonell, Fréderic
  • Goto, Minori
  • Sauthier, Guillaume
  • Sierra, Juan F.
  • Figueroa, Adriana I.
  • Costache, Marius V.
  • Miwa, Shinji
  • Suzuki, Yoshishige
  • Valenzuela, Sergio O.
(Bi1–xSbx)2Te3 topological insulators (TIs) are gathering increasing attention owing to their large charge-to-spin conversion efficiency and the ensuing spin–orbit torques (SOTs) that can be used to manipulate the magnetization of a ferromagnet (FM). The origin of the torques, however, remains elusive, while the implications of hybridized states and the strong material intermixing at the TI/FM interface are essentially unexplored. By combining interface chemical analysis and spin-transfer ferromagnetic resonance (ST-FMR) measurements, we demonstrate that intermixing plays a critical role in the generation of SOTs. By inserting a suitable normal metal spacer, material intermixing is reduced and the TI properties at the interface are largely improved, resulting in strong variations in the nature of the SOTs. A dramatic enhancement of a field-like torque, opposing and surpassing the Oersted-field torque, is observed, which can be attributed to the non-equilibrium spin density in Rashba-split surface bands and to the suppression of spin memory loss. These phenomena can play a relevant role at other interfaces, such as those comprising transition metal dichalcogenides., This research was partially supported by the European Research Council under Grant Agreement (GA) No. 306652 SPINBOUND and 899896 SOTMEM, by the Spanish Ministry of Economy and Competitiveness, MINECO (under Contract No. MAT2016-75952-R and Severo Ochoa No. SEV-2017-0706), and by the CERCA Programme and the Secretariat for Universities and Research, Knowledge Department of the Generalitat de Catalunya 2017 SGR 827. The project benefitted from the access provided by LETI-CEA in Grenoble, France, within the framework of the NFFA-Europe Transnational Access Activity funded by the EU-H2020 research and innovation program under GA No. 654360. F.B. acknowledges funding from the European Union’s Marie Skłodowska-Curie actions under GA No. 624897 and from MINECO Ramón y Cajal program under Contract No. RYC-2015-18523 and A.I.F. from the European Union’s Marie Skłodowska-Curie actions under GA No. 796925., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Cr on the hydrogen storage and electronic properties of BCC alloys: Experimental and first-principles study

  • Balcerzak, Mateusz
  • Wagstaffe, M.
  • Robles, Roberto
  • Pruneda, Miguel
  • Noei, H.
Inventing an effective method to store large amounts of hydrogen at room temperature is one of the key challenges in developing a hydrogen-based economy. Metal hydrides have attracted attention owing to their promising hydrogen storage capabilities. We have systematically studied the structural and electronic properties of mechanically synthesized Ti0.5V1.5-xCrx (0 ≤ x ≤ 0.3) alloys and investigated the influence of the addition of Cr atoms on the hydrogen storage properties of vanadium-rich body-centered-cubic (V-BCC) alloys. X-ray diffraction (XRD) results indicate that all alloys are composed of BCC main phase, with the lattice parameters exhibiting no change following chemical modification. The kinetic measurements have revealed that Cr-containing alloys exhibit improved hydrogen uptake. X-ray photoelectron spectroscopy (XPS) measurements have shown that the addition of Cr has a significant effect on the anti-oxidation properties of V-BCC alloys, increasing their chemical activity and thus enhancing the hydrogen storage properties. Moreover, XPS results elucidate the role of activation of the studied materials. Additionally, the electrochemical properties of the negative electrodes (as part of Ni-MHx secondary batteries) made of Ti0.5V1.4-xNi0.1Crx (0 ≤ x ≤ 0.3) system have been studied by cyclic charge-discharge and demonstrate that doping of the V-BCC alloys with Cr can significantly improve the cycle-life stability of anode that exhibits similar discharge performance up to 50 cycles. First principles simulations are used to analyse the changes in the electronic density of states close to the Fermi level, as a function of Cr concentration, as well as binding energies and structural changes upon hydrogen absorption. Furthermore, ab initio studies confirmed that H absorption is favoured with increasing Cr-content. Our study highlights the importance of the addition of Cr to V-BCC alloys on both solid-gas and electrochemical hydrogenation reactions., Financial assistance from National Science Centre, Poland (no. 2015/17/N/ST8/00271). This project has received funding from the EU-H2020 research and innovation programme under grant agreement No 654360 having benefitted from the access provided by Mateusz Balcerzak in DESY NanoLab (Hamburg, Germany) and ICN2 (Barcelona, Spain) within the framework of the NFFA-Europe Transnational Access Activity. M. Pruneda acknowledges financial support from Spanish MICIU, AEI, and EU FEDER (Grant No. PGC2018-096955-B-C43) and Generalitat de Catalunya (Grant No. 2017SGR1506)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-linear temperature dependent phononic response of epitaxial lanthanum nickelate thin film

  • Sunidhi
  • Sharma, Vishal
  • Arora, Sunil K.
  • Sánchez Barrera, Florencio
  • Sathe, Vasant
From the temperature dependent Raman spectroscopy study (80 K–300 K) on epitaxial thin film of lanthanum nickelate (LNO), we find that the characteristics Raman active phonon modes (A1g and Eg) of LNO soften with an increase in the temperature. The extent of softening is greater for the A1g mode owing to substrate induced strain. In addition, temperature dependent Raman shifts presented with some non-linearities. Our analysis suggests that these non linearities arise due to an anharmonic contribution to the Raman shifts. We find that for A1g mode, four-phonon anharmonic process contributed most to the temperature dependent Raman shifts, while the contributions from three-phonon, strain and thermal expansion effect found to be relatively small. However, for Eg mode, the shift originated mainly from the thermal expansion effect., This project has received funding from EU-H2020 research and innovation programme under grant agreement No. 654360 within NFFA- Europe transnational access activity. We also thank UGC-DAE Consortium for Scientific Research, Indore for providing Temperature dependent Raman measurements facility. Ms. Sunidhi expresses her thanks to UGC, New Delhi for providing fellowship for research work. Florencio Sánchez acknowledges financial support from the Spanish Ministry of Science and Innovation, through the MAT2017-85232-R (AEI / FEDER, EU) and SEV-2015-0496 projects, and from Generalitat de Catalunya (2017 SGR 1377)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

GaAs nanoscale membranes: Prospects for seamless integration of III-Vs on silicon

  • Raya, Andrés M.
  • Friedl, Martin
  • Martí-Sànchez, Sara
  • Dubrovskii, Vladimir G.
  • Francaviglia, Luca
  • Alén, Benito
  • Morgan, Nicholas
  • Tütüncüoglu, Gözde
  • Ramasse, Quentin M.
  • Fuster, David
  • Llorens Montolio, José Manuel
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
The growth of compound semiconductors on silicon has been widely sought after for decades, but reliable methods for defect-free combination of these materials have remained elusive. Recently, interconnected GaAs nanoscale membranes have been used as templates for the scalable integration of nanowire networks on III-V substrates. Here, we demonstrate how GaAs nanoscale membranes can be seamlessly integrated on silicon by controlling the density of nuclei in the initial stages of growth. We also correlate the absence or presence of defects with the existence of a single or multiple nucleation regime for the single membranes. Certain defects exhibit well-differentiated spectroscopic features that we identify with cathodoluminescence and micro-photoluminescence techniques. Overall, this work presents a new approach for the seamless integration of compound semiconductors on silicon., LMSC acknowledges funding from Swiss National Science Foundation through the NCCR QSIT and project nr IZLRZ2_163861. H2020 program through project Indeed. VGD acknowledges Russian Science Foundation for financial support under grant 19-72-30004. IMN acknowledge funding from the Spanish MINECO (TEC2015-64189-C3-2-R, EUIN2017- 88844, RYC-2017-21995, BES-2013-065340), the Community of Madrid (P2018/EMT-4308), and the European Union FEDER, FSE. EURAMET EMPIR 17FUN06 SIQUST. AMR acknowledges the service from the X-SEM Laboratory at IMN, and funding from MINECO under project CSIC13-4E-1794 with support from EU (FEDER, FSE). SMS acknowledges funding from “Programa Internacional de Becas ‘la Caixa’-Severo Ochoa”. ICN2 acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. Part of the HAADF-STEM microscopy was conducted in the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragon-Universidad de Zaragoza. This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement no. 654360 NFFA-Europe. We acknowledge support from CSIC Research Platform on Quantum Technologies PTI-001. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no 823717 – ESTEEM3.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic nanoparticles: An indicator of health risks related to anthropogenic airborne particulate matter

  • Kermenidou, M.
  • Balcells, Lluis
  • Martínez Boubeta, Carlos
  • Chatziavramidis, A.
  • Konstantinidis, I.
  • Samaras, T.
  • Sarigiannis, D.
  • Simeonidis, Konstantinos
Due to their small dimensions, airborne particles are able to penetrate through inhalation into many human organs, from the lungs to the cardiovascular system and the brain, which can threaten our health. This work establishes a novel approach of collecting quantitative data regarding the fraction, the composition and the size distribution of combustion-emitted particulate matter through the magnetic characterization and analysis of samples received by common air pollution monitoring. To this end, SQUID magnetometry measurements were carried out for samples from urban and suburban areas in Thessaloniki, the second largest city of Greece, taking into consideration the seasonal and weekly variation of airborne particles levels as determined by occurring traffic and meteorological conditions. The level of estimated magnetically-responding atmospheric particulate matter was at least 0.5 % wt. of the collected samples, mostly being present in the form of ultrafine particles with nuclei sizes of approximately 14 nm and their aggregates. The estimated quantities of magnetic particulate matter show maximum values during autumn months (0.8 % wt.) when increased commuting takes place, appearing higher in the city center by up to 50% than those in suburban areas. In combination with high-resolution transmission electron imaging and elemental analysis, it was found that Fe3O4 and similar ferrites, some of them attached to heavy metals (Co, Cr), are the dominant magnetic contributors arising from anthropogenic high-temperature processes, e.g. due to traffic emissions. Importantly, nasal cytologic samples collected from residents of both central and suburban areas showed same pattern in what concerns magnetic behavior, thus verifying the critical role of nanosized magnetic particles in the assessment of air pollution threats. Despite the inherent statistical limitations of our study, such findings also indicate the potential transmission of infectious pathogens by means of pollution-derived nanoparticles into the respiratory system of the human body., This project has received funding from the EU-H2020 research and innovation programme under grant agreement No 654360 having benefitted from the access provided by ICMAB-CSIC and Universitat Autonoma de Barcelona in Bellaterra-Barcelona within the framework of the NFFA-Europe Transnational Access Activity. Authors would like to thank Anna Esther Carrillo for the experimental assistance during SEM observations, Bernat Bozzo for the support in SQUID measurements and Emma Rossinyol for carrying out the HRTEM imaging., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal engineering and ferroelectricity at the nanoscale in epitaxial 1D manganese oxide on silicon

  • Gómez Rodríguez, Andrés
  • Vila Fungueiriño, José Manuel
  • Jolly, Claire
  • Garcia Bermejo, Ricardo
  • Oró, Judith
  • Ferain, Etienne
  • Mestres, Narcís
  • Magén, César
  • Gázquez, Jaume
  • Rodriguez Carvajal, Juan
  • Carretero Genevrier, Adrian
Ferroelectric oxides have attracted much attention due to their wide range of applications, particularly in electronic devices such as nonvolatile memories and tunnel junctions. As a result, the monolithic integration of these materials into silicon technology and their nanostructuration to develop alternative cost-effective processes are among the central points in the current technology. In this work, we used a chemical route to obtain nanowire thin films of a novel Sr1+δMn8O16 (SMO) hollandite-type manganese oxide on silicon. Scanning transmission electron microscopy combined with crystallographic computing reveals a crystal structure comprising hollandite and pyrolusite units sharing the edges of their MnO6 octahedra, resulting in three types of tunnels arranged along the c axis, where the ordering of the Sr atoms produces natural symmetry breaking. The novel structure gives rise to ferroelectricity and piezoelectricity, as revealed by local direct piezoelectric force microscopy measurements, which confirmed the ferroelectric nature of the SMO nanowire thin films at room temperature and showed a piezoelectric coefficient d33 value of 22 ± 6 pC N−1. Moreover, we proved that flexible vertical SMO nanowires can be harvested providing an electrical output energy through the piezoelectric effect, showing excellent deformability and high interface recombination. This work indicates the possibility of engineering the integration of 1D manganese oxides on silicon, a step which precedes the production of microelectronic devices., A. C.-G., C. J., R. G.-B. and J. M. V.-F. acknowledge the financial support from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (No. 803004) and the French Agence Nationale de la Recherche (ANR), project Q-NOSS ANR ANR-16-CE09-0006-01. This project has received funding from the EU-H2020 research and innovation program under grant agreement no 654360 having benefitted from the access provided by ICMAB-CSIC in Barcelona within the framework of the NFFA-Europe Transnational Access Activity. This project has received funding from the European's Union Horizon 2020 research and innovation programme under Grant No. 823717-ESTEEM3, the Spanish Ministry of Economy and Competitivity through Project MAT2017-82970-C2-2-R, and the Aragon Regional Government through Project No. E13_20R (with European Social Fund). We acknowledge SOLEIL for provision of synchrotron radiation facilities, and we would like to thank Pierre Fertey for assistance in using beamline Cristal. J. G. also acknowledges the Ramon y Cajal program (RYC-2012-11709). The authors thank D. Montero for providing the FEGSEM images. N. M. acknowledges the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa FUNFUTURE (CEX2019-000917-S) and SUMATE (RTI2018-095853-B-C21) projects, co-financed by the European Regional Development Fund. The FEGSEM instrumentation was facilitated by the Institut des Matériaux de Paris Centre (IMPC FR2482). The authors thank Frederic Pichot for his expertise and advice during the nanowire lithographic process. The STEM microscopy work was conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Instituto de Nanociencia de Aragon (INA) at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of aging on the resistive switching behavior of epitaxial strontium titanate based heterostructures

  • Sharma, Vishal
  • Sunidhi
  • Arora, Sunil K.
  • Sánchez Barrera, Florencio
  • Gupta, Vinay
  • Tomar, Monika
In this work, we investigated the impact of aging on the resistive switching behavior of high quality epitaxial heterostructure resistive switching devices [Pt/SrTiO3/LaNiO3/LaAlO3 (001) with SrTiO3 (STO) as switching layer, Pt as top electrode and LaNiO3 as bottom electrode]. For this study, the resistive switching memory devices of two different ultrathin switching layer (STO) thicknesses (5 and 10 nm) were fabricated with different shape and size of top electrode (Pt) i.e. 20 μm (circular shape) and 50 μm (square shaped). Subsequently, their resistive switching behavior at different instant of time i.e. freshly prepared, 4 months and 16 months were studied. With long aging, we find a decrease in the positive bais voltages for which current start rising exponentially (set voltages) for most of the devices besides emergence of various features such as multiple crossovers, noisy/spike region during set process and openness in the switching hysteresis loop. The existence of these behaviors is attributed to the fact that the moisture permeates through the interfacial region between top electrode (Pt) and switching layer (STO) irrespective of the thickness of switching layer and dimensions of top electrode., This project has received funding from EU-H2020 research and innovation programme under grant agreement No. 654360 within NFFA- Europe transnational access activity. We also thanks, Dr. Ignasi Fina Martinez,ICMAB-CSIC for initial electrical measurement support and group members of EMDL DU for providing technical support during electrical characterization. Vishal Sharma expresses his gratitude to Panjab University, Chandigarh and thereafter UGCDAE CSR Indore for providing fellowship for carrying out research work. Ms. Sunidhi expresses her thanks to UGC, New Delhi for providing fellowship for research work. F. Sánchez acknowledges financial support from the Spanish Ministry of Science and Innovation, through the MAT2017-85232-R (AEI/FEDER, EU), PID2020- 112548RB-I00 (AEI/FEDER, EU), and Severo Ochoa FUNFUTURE (CEX2019-000917-S) projects, and from Generalitat de Catalunya (2017 SGR 1377)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Localized electronic vacancy level and its effect on the properties of doped manganites

  • Juan, Dilson
  • Pruneda, Miguel
  • Ferrari, Valeria
Oxygen vacancies are common to most metal oxides and usually play a crucial role in determining the properties of the host material. In this work, we perform ab initio calculations to study the influence of vacancies in doped manganites La(1−x)SrxMnO3, varying both the vacancy concentration and the chemical composition within the ferromagnetic-metallic range (0.2<x<0.5). We find that oxygen vacancies give rise to a localized electronic level and analyse the effects that the possible occupation of this defect state can have on the physical properties of the host. In particular, we observe a substantial reduction of the exchange energy that favors spin-flipped configurations (local antiferromagnetism), which correlate with the weakening of the double-exchange interaction, the deterioration of the metallicity, and the degradation of ferromagnetism in reduced samples. In agreement with previous studies, vacancies give rise to a lattice expansion when the defect level is unoccupied. However, our calculations suggest that under low Sr concentrations the defect level can be populated, which conversely results in a local reduction of the lattice parameter. Although the exact energy position of this defect level is sensitive to the details of the electronic interactions, we argue that it is not far from the Fermi energy for optimally doped manganites (x∼1/3), and thus its occupation could be tuned by controlling the number of available electrons, either with chemical doping or gating. Our results could have important implications for engineering the electronic properties of thin films in oxide compounds., Work at ICN2 was funded by FEDER/Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (grant PGC2018-096955-B-C43), Generalitat de Catalunya (2017SGR1506), and the EU-H2020 programme (654360 and 824143) under the NFFA-Europe Transnational Access Activity and the EU MaX Center of Excellence. ICN2 is also supported by the Severo Ochoa Program (SEV--2013--0295) and the CERCA Program of Generalitat de Catalunya. D. J. and V. F. acknowledge support from CONICET (PIP 00020-2019) and ANPCyT (PICT1857), Argentina. D. J. acknowledges CONICET for a doctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrotalcite-Embedded Magnetite Nanoparticles for Hyperthermia-Triggered Chemotherapy

  • Simeonidis, Konstantinos
  • Kaprara, Efthimia
  • Rivera Gil, Pilar
  • Xu, Ruixue
  • Teran, Francisco J.
  • Kokkinos, Evgenios
  • Mitropoulos, Athanassios
  • Maniotis, Nikolaos
  • Balcells, Lluis
A magnetic nanocomposite, consisting of Fe3O4 nanoparticles embedded into a Mg/Al layered double hydroxide (LDH) matrix, was developed for cancer multimodal therapy, based on the combination of local magnetic hyperthermia and thermally induced drug delivery. The synthesis procedure involves the sequential hydrolysis of iron salts (Fe2+, Fe3+) and Mg2+/Al3+ nitrates in a carbonate-rich mild alkaline environment followed by the loading of 5-fluorouracil, an anionic anticancer drug, in the interlayer LDH space. Magnetite nanoparticles with a diameter around 30 nm, dispersed in water, constitute the hyperthermia-active phase able to generate a specific loss of power of around 500 W/g-Fe in an alternating current (AC) magnetic field of 24 kA/m and 300 kHz as determined by AC magnetometry and calorimetric measurements. Heat transfer was found to trigger a very rapid release of drug which reached 80% of the loaded mass within 10 min exposure to the applied field. The potential of the Fe3O4/LDH nanocomposites as cancer treatment agents with minimum side-effects, owing to the exclusive presence of inorganic phases, was validated by cell internalization and toxicity assays, The project was financially supported by Stavros Niarchos Foundation and Eastern Macedonia and Thrace Institute of Technology fellowships for assisting young scientists in prototyping innovative products by using cutting-edge technology. Specific measurements received funding from the EU-H2020 research and innovation programme under grant agreement No. 654360 having benefitted from the access provided by ICMAB-CSIC and Universitat Autonoma de Barcelona in Bellaterra-Barcelona within the framework of the NFFA-Europe Transnational Access Activity. Authors would like to thank Anna Esther Carrillo for the experimental assistance during SEM observations and Bernat Bozzo for the support in SQUID measurements. This work was partially funded by Spanish Ministry of Science, Innovation and Universities (MAT2017-85617-R, SEV-2016-0686, RED2018-102626-T) and Comunidad de Madrid (NANOMAGCOST). COST Actions CA17115 (MyWave), and CA17140 (Nano2Clinic) are also acknowledged. The UPF acknowledges the Ministry of Science, Innovation and Universities (MICINN) and the AEI (RYC-2012-10059, MDM-2014-0370- 04, CTQ2013-45433-PFEDER], MAT2016-75362-C3-2-R, AEI-SAF2015-73052-EXP) and the AGAUR (2017 SGR 1054) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-surface products from de-fluorination of C60F48 on Ag(111): C60, C60Fx and silver fluoride formation

  • Barrena, Esther
  • Palacios-Rivera, Rogger
  • Babuji, Adara
  • Schio, Luca
  • Tormen, Massimo
  • Floreano, Luca
  • Ocal, Carmen
By employing diverse surface sensitive synchrotron radiation spectroscopies we demonstrate that the fluorine content of initial C60F48 deposited at room temperature on Ag(111) varies with molecular coverage. At the very early stages of deposition, C60F48 fully de-fluorinates and transforms into C60. Strong indications of silver fluoride formation are provided. The chemical footprint of fluorinated fullerenes emerges at relatively low molecular coverage indicating that the degree of fullerene de-fluorination decreases (from total to partial de-fluorination) as molecules are deposited. De-fluorination stops well before the substrate surface is completely covered by fullerenes. At the molecular level, the fluorine loss observed by spectroscopic techniques are supported by scanning tunneling microscopy imaging. Both molecules and metal surface are importantly involved in the process., This work has been supported by the Spanish Government under the projects PID2019-110907GB-I00, MAT2017-85089- C2-1-R (AEI/FEDER, UE) and the ‘‘Severo Ochoa’’ Program for Centres of Excellence in R&D (CEX2019-000917-S). This project has received funding from the EU-H2020 research and innovation programme under grant agreement No 654360 having benefitted from the access provided by CNR-IOM in Trieste and Grenoble within the framework of the NFFA-Europe Transnational Access Activity (ID: 929)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural Study of the Hydration of Lipid Membranes Upon Interaction With Mesoporous Supports Prepared by Standard Methods and/or X‐Ray Irradiation

  • Marmiroli, Benedetta
  • Sartori, Barbara
  • Kyvik Ruiz, Adriana
  • Ratera, Immaculada
  • Amenitsch, Heinz
Mesoporous materials feature ordered tailored structures with uniform pore sizes and highly accessible surface areas, making them an ideal host for functional organic molecules or nanoparticles for analytical and sensing applications. Moreover, as their porosity could be employed to deliver fluids, they could be suitable materials for nanofluidic devices. As a first step in this direction, we present a study of the hydration of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) model lipid membranes on solid mesoporous support. POPC was selected as it changes the structure upon hydration at room temperature. Mesoporous films were prepared using two different templating agents, Pluronic P123 (PEO–PPO–PEO triblock copolymer where PEO is polyethylene oxide and PPO is polypropylene oxide) and Brij 58 (C16H33(EO)20OH where EO is ethylene oxide), both following the conventional route and by X-ray irradiation via deep X-ray lithography technique and subsequent development. The same samples were additionally functionalized with a self-assembly monolayer (SAM) of (3-aminopropyl)triethoxysilane. For every film, the contact angle was measured. A time resolved structural study was conducted using in situ grazing incidence small-angle X-ray scattering while increasing the external humidity (RH), from 15 to 75% in a specially designed chamber. The measurements evidenced that the lipid membrane hydration on mesoporous films occurs at a lower humidity value with respect to POPC deposited on silicon substrates, demonstrating the possibility of using porosity to convey water from below. A different level of hydration was reached by using the mesoporous thin film prepared with conventional methods or the irradiated ones, or by functionalizing the film using the SAM strategy, meaning that the hydration can be partially selectively tuned. Therefore, mesoporous films can be employed as “interactive” sample holders with specimens deposited on them. Moreover, thanks to the possibility of patterning the films using deep X-ray lithography, devices for biological studies of increasing complexity by selectively functionalizing the mesopores with biofunctional SAMs could be designed and fabricated., This research was partly supported by the European Commission under grant agreement 654360 NFFA-EUROPE. This work includes part of the scientific activities of the internal CERIC-ERIC project renewals. The authors are thankful to C. Morello and L. Sancin for their technical support. IR is grateful to the support of the Spanish Ministry of Economy and Competitiveness (MINECO) (PID2019-105622RBI00) through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX 2019-000917-S), Instituto de Salud Carlos III through the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), Generalitat de Catalunya (SGR-918), and Fundacio Marato de TV3 (No. 201812)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How size, shape and assembly of magnetic nanoparticles give rise to different hyperthermia scenarios

  • Gavilán, Helena
  • Simeonidis, Konstantinos
  • Myrovali, Eirini
  • Mazarío, Eva
  • Chubykalo-Fesenko, Oksana
  • Chantrell, Roy W.
  • Balcells, Lluis
  • Angelakeris, Mavroidis
  • Morales, María Del Puerto
  • Serantes, David
The use of magnetic nanoparticles (MNPs) to locally increase the temperature at the nanoscale under the remote application of alternating magnetic fields (magnetic particle hyperthermia, MHT) has become an important subject of nanomedicine multidisciplinary research, focusing among other topics on the optimization of the heating performance of MNPs and their assemblies under the effect of the magnetic field. We report experimental data of heat released by MNPs using a wide range of anisometric shapes and their assemblies in different media. We outline a basic theoretical investigation, which assists the interpretation of the experimental data, including the effect of the size, shape and assembly of MNPs on the MNPs’ hysteresis loops and the maximum heat delivered. We report heat release data of anisometric MNPs, including nanodisks, spindles (elongated nanoparticles) and nanocubes, analysing, for a given shape, the size dependence. We study the MNPs either acting as individuals or assembled through a magnetic-field-assisted method. Thus, the physical geometrical arrangement of these anisometric particles, the magnetization switching and the heat release (by means of the determination of the specific adsorption rate, SAR values) under the application of AC fields have been analysed and compared in aqueous suspensions and after immobilization in agar matrix mimicking the tumour environment. The different nano-systems were analysed when dispersed at random or in assembled configurations. We report a systematic fall in the SAR for all anisometric MNPs randomly embedded in a viscous environment. However, certain anisometric shapes will have a less marked, an almost total preservation or even an increase in SAR when embedded in a viscous environment with certain orientation, in contrast to the measurements in water solution. Discrepancies between theoretical and experimental values reflect the complexity of the systems due to the interplay of different factors such as size, shape and nanoparticle assembly due to magnetic interactions. We demonstrate that magnetic assembly holds great potential for producing materials with high functional and structural diversity, as we transform our nanoscale building blocks (anisometric MNPs) into a material displaying enhanced SAR properties., K. S. acknowledges Stavros Niarchos Foundation for financial support. SQUID measurements received funding from the EU-H2020 research and innovation program under grant agreement no 654360 having benefitted from the access provided by CSIC-ICMAB in Barcelona within the framework of the NFFA-Europe Transnational Access Activity. This work was also partially supported by grants from the MINEICO (MAT2017-88148R to M. P. Morales; Severo Ochoa Program (CEX2019-000917-S), RTI2018-099960-B-I00 to Ll. Balcells), the Spanish Agencia Estatal de Investigación (PID2019-109514RJ-100 to D. Serantes) and from the EU, H2020 program through HOTZYME-829162 project. E. M. acknowledges financial support from the Madrid Government (Comunidad de Madrid-Spain) under the Multiannual Agreement with Universidad Autónoma de Madrid in the line of action encouraging youth research doctors, in the context of the V PRICIT (Regional Programme of Research and Technological Innovation, SI1-PJI-2019-00366)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heat-up colloidal synthesis of shape-controlled cu-se-s nanostructures—role of precursor and surfactant reactivity and performance in n2 electroreduction

  • Mourdikoudis, Stefanos
  • Antonaropoulos, George
  • Antonatos, Nikolas
  • Rosado, Mario J.
  • Storozhuk, Liudmyla
  • Takahashi, Mari
  • Maenosono, Shinya
  • Luxa, Jan
  • Sofer, Zdenek
  • Ballesteros, Belén
  • Kim Thanh, Nguyen Thi
  • Lappas, A.
Copper selenide-sulfide nanostructures were synthesized using metal-organic chemical routes in the presence of Cu-and Se-precursors as well as S-containing compounds. Our goal was first to examine if the initial Cu/Se 1:1 molar proportion in the starting reagents would always lead to equiatomic composition in the final product, depending on other synthesis parameters which affect the reagents reactivity. Such reaction conditions were the types of precursors, surfactants and other reagents, as well as the synthesis temperature. The use of ‘hot-injection’ processes was avoided, focusing on ‘non-injection’ ones; that is, only heat-up protocols were employed, which have the advantage of simple operation and scalability. All reagents were mixed at room temperature followed by further heating to a selected high temperature. It was found that for samples with particles of bigger size and anisotropic shape the CuSe composition was favored, whereas particles with smaller size and spherical shape possessed a CuSe phase, especially when no sulfur was present. Apart from elemental Se, AlSe was used as an efficient selenium source for the first time for the acquisition of copper selenide nanostructures. The use of dodecanethiol in the presence of trioctylphosphine and elemental Se promoted the incorporation of sulfur in the materials crystal lattice, leading to Cu-Se-S compositions. A variety of techniques were used to characterize the formed nanomaterials such as XRD, TEM, HRTEM, STEM-EDX, AFM and UV-Vis-NIR. Promising results, especially for thin anisotropic nanoplates for use as electrocatalysts in nitrogen reduction reaction (NRR), were obtained., This project has received funding from the EU-H2020 research and innovation programme under grant agreement No 654360 having benefitted from the access provided by IESL-FORTH in Heraklion, Greece and ICN2 (Barcelona, Spain) within the framework of the NFFA-Europe Transnational Access Activity. This work was also supported by the ERC-CZ program (project LL2003) from the Ministry of Education Youth and Sports (MEYS). NTKT thanks EPSRC UK for financial support (EP/M015157/1). ICN2 is supported by the Severo Ochoa Centres of Excellence program, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706), and by the CERCA Program/Generalitat de Catalunya. B.B. acknowledges support from AGAUR agency for 2017SGR327.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superelasticity preservation in dissimilar joint of NiTi shape memory alloy to biomedical PtIr

  • Shamsolhodaei, A.
  • Oliveira, J. P.
  • Panton, B.
  • Ballesteros, Belén
  • Schell, N.
  • Zhou, Y.
Laser microwelding was used to join, for the first time, superelastic NiTi to biomedical PtIr which can be used in multicomponent biomedical devices. By process optimization, it was possible to control the formation of the B2 NiTiPt phase, with no intermetallic compounds being formed. The NiTiPt phase inside the fusion zone had a strong metallurgical bonding with the NiTi base material due to the smooth transition of its grain orientation towards 〈111〉 B2 NiTi. The major finding of the present work is the preservation of the NiTi superelastic response in the welded joint as evidenced by the load/unloading cycling up to 6% strain, significantly higher than typically required for biomedical applications., This project has received funding from the EU-H2020 Research and Innovation program under Grant agreement No. 654360 having benefitted from the access provided by ICN2 (Spain) within the framework of the NFFA-Europe Transnational Access Activity. ICN2 is funded by the CERCA program/Generalitat de Catalunya and by the Severo Ochoa program of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. SEV-2017-0706). JPO acknowledges Fundação para a Ciência e a Tecnologia (FCT - MCTES) for its financial support via the project UIDB/00667/2020 (UNIDEMI). The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020 (proposal I-20160912).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Critical Role of Phosphorus in Hollow Structures Cobalt-Based Phosphides as Bifunctional Catalysts for Water Splitting

  • Zhang, Wei
  • Han, Ning
  • Luo, Jiangshui
  • Han, Xu
  • Feng, Shihui
  • Guo, Wei
  • Xie, Sijie
  • Zhou, Zhenyu
  • Subramanian, Palaniappan
  • Wan, Kai
  • Arbiol, Jordi
  • Zhang, Chi
  • Liu, Shaomin
  • Xu, Maowen
  • Zhang, Xuan
  • Fransaer, Jan
Título del postprint: High-performance Bifunctional hollow structures Cobalt-based Phosphides Catalysts for Water Splitting, Cobalt phosphides electrocatalysts have great potential for water splitting, but the unclear active sides hinder the further development of cobalt phosphides. Wherein, three different cobalt phosphides with the same hollow structure morphology (CoP-HS, CoP-HS, CoP-HS) based on the same sacrificial template of ZIF-67 are prepared. Surprisingly, these cobalt phosphides exhibit similar OER performances but quite different HER performances. The identical OER performance of these CoP-HS in alkaline solution is attributed to the similar surface reconstruction to CoOOH. CoP-HS exhibits the best catalytic activity for HER among these CoP-HS in both acidic and alkaline media, originating from the adjusted electronic density of phosphorus to affect absorption–desorption process on H. Moreover, the calculated ΔG based on P-sites of CoP-HS follows a quite similar trend with the normalized overpotential and Tafel slope, indicating the important role of P-sites for the HER process. Moreover, CoP-HS displays good performance (cell voltage of 1.67 V at a current density of 50 mA cm) and high stability in 1 M KOH. For the first time, this work detailly presents the critical role of phosphorus in cobalt-based phosphides for water splitting, which provides the guidance for future investigations on transition metal phosphides from material design to mechanism understanding., W.Z. and N.H. contributed equally to this work. X.Z. and J.F. are grateful for the Research Foundation-Flanders (FWO) project (12ZV320N). Funding from National Natural Science Foundation of China (project No.: 22005250, 21776120, and 51901161) is appreciated. M.X. is grateful to the National Natural Science Foundation of China (project No.: 22179109). W.Z. is grateful to the China Scholarship Council (NO. 201808310068). W.G. is grateful to the China Scholarship Council (NO. 201806030189). S.X. is grateful to the China Scholarship Council. K.W. is grateful to the Oversea Study Program of Guangzhou Elite Project. Funding from the Research Foundation–Flanders (FWO) (project No.: G0B3218N) and Natural Science Foundation of Fujian Province, China (No.: 2018J01433) is acknowledged. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ECOCAT and subproject NANOGEN. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. This work has received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement No. 654360 NFFA-Europe. X.H. thanks China Scholarship Council for scholarship support (201804910551)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic properties of coordination clusters with {Mn4} and {Co4} antiferromagnetic cores

  • Achilli, Simona
  • Besson, Claire
  • He, Xu
  • Ordejón, Pablo
  • Meyer, Carola W.
  • Zanolli, Zeila
We present a joint experimental and theoretical characterization of the magnetic properties of coordination clusters with an antiferromagnetic core of four magnetic ions. Two different compounds are analyzed, with Co and Mn ions in the core. While both molecules are antiferromagnetic, they display different sensitivities to external magnetic field, according to the different atomic magnetic moments and strength of the intra-molecular magnetic couplings. In particular, the dependence of the magnetization versus field of the two molecules switches with temperature: at low temperature the magnetization is smaller in {Mn4} than in Co4, while the opposite happens at high temperature. Through a detailed analysis of the electronic and magnetic properties of the two compounds we identify a stronger magnetic interaction between the magnetic ions in {Mn4} with respect to {Co4}. Moreover {Co4} displays not negligible spin-orbit related effects that could affect the spin lifetime in future antiferromagnetic spintronic applications. We highlight the necessity to account for these spin-orbit effects together with electronic correlation effects for a reliable description of these compounds., The Authors acknowledge EU H2020 project NFFA (Grant No. 654360) under Transnational Access Activity ID-753. Computational resources in MareNostrum4 at the Barcelona Supercomputing Center were provided by the Red Española de Supercomputacion (Grants FI-2019-2-0038 and FI-2020-1-0022) and PRACE (grant OptoSpin, project id. 2020225411). ZZ acknowledges financial support by the Ramon y Cajal program RYC-2016-19344 (MINECO/AEI/FSE, UE) and the Netherlands Sector Plan program 2019-2023. PO, HX and ZZ thank the support by the EU H2020-NMBP-TO-IND-2018 project “INTERSECT” (Grant No. 814487), the EC H2020-INFRAEDI-2018-2020 MaX “Materials Design at the Exascale” CoE (Grant No. 824143), Grant PGC2018-096955-B-C43 funded by MCIN/AEI/10.13039/501100011033 (Spain) and “ERDF A way of making Europe” (European Union), the “Centro de Excelencia Severo Ochoa” Grant SEV-2017-0706 funded by MCIN/AEI/ 10.13039/501100011033 (Spain) and Generalitat de Catalunya (CERCA program and Grant 2017SGR1506). CM acknowledges funding by Niedersächsisches Vorab, Akz. 11-76251-14-3/15(ZN3141)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unravelling the origin of the capacitance in nanostructured nitrogen-doped carbon - NiO hybrid electrodes deposited with laser

  • García Lebière, Pablo
  • Gyorgy, Eniko
  • Logofatu, Constantin
  • Naumenko, Denys
  • Amenitsch, Heinz
  • Rajak, Piu
  • Ciancio, Regina
  • Pérez del Pino, Ángel
The full knowledge of the charge storage mechanisms occurring in complex composite electrodes is key for the straightforward development of advanced electrochemical capacitors. In this work, hybrid electrodes composed of reduced graphene oxide, multiwall carbon nanotubes and NiO nanostructures were fabricated through reactive inverse matrix assisted pulsed laser evaporation technique. Nitrogen doping of the carbon nanostructures was carried out by introducing ammonia, urea and melamine precursors in the target. The N-doped graphene electrodes exhibited a significant capacitance enhancement as compared to non-doped ones. This fact is commonly ascribed to faradaic mechanisms. However, our structural-compositional studies point to a significant change of the structural configuration of the composites at the nanoscale upon the nitrogen functionalization as the source of the electrodes’ capacitance enhancement. The composites fabricated with urea precursor exhibited the highest capacitance, and this fact was associated with the presence of pyridinic N groups that triggered the formation of a high amount of structural defects (vacancies – boundaries) and microporosity, not observed in the samples synthesized with other precursors that mainly contained pyrrolic-graphitic N., The authors are grateful for the financial support of MCIN/AEI/10.13039/501100011033 under the project PID2020-116612RB-C31 and support from AGAUR of Generalitat de Catalunya through projects 2017 SGR 1086 and 2017 SGR 1771. ICMAB acknowledges financial support from MCIN/AEI/10.13039/501100011033, through Severo Ochoa FUNFUTURE grant (CEX2019-000917-S). This project also received funding from the EU-H2020 research and innovation programme under the grant agreement No 654360 having benefited from the access provided by the Graz University of Technology and the Consiglio Nazionale delle Ricerche– Istituto Officina dei Materiali in Elettra-Sincrotrone Trieste (SAXS), and TEM and Raman spectroscopy installations, respectively, within the framework of the NFFA-Europe Transnational Access Activity (project ID 912). P.G.L thanks the financial support of the Spanish Ministry of Economy, Industry and Competitiveness through the grant BES-2017-081652 for the formation of scientific researchers. PR acknowledges the receipt of a fellowship from the ICTP Programme for Training and Research in Italian Laboratories, Trieste, Italy. The authors acknowledge Marco Lazzarino for acquiring the Raman spectra within the NFFA collaboration, as well as support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microscopic mechanism of ferroelectric properties in barium hexaferrites

  • Turchenko, Vitalii
  • Bondyakov, A. S.
  • Trukhanov, Sergei
  • Fina, Ignasi
  • Korovushkin, V. V.
  • Balasoiu, Maria
  • Polosan, Silviu
  • Bozzo, Bernat
  • Lupu, Nicoleta
  • Trukhanov, Alex
The microscopic mechanism of the occurrence of ferroelectric properties in M-type barium hexaferrites is investigated by experimental and first-principle computation methods. The analysis of magnetic, X-ray, and Mössbauer measurements of BaFe12O19 samples ascertains the correlation between the thermal factor in the process of annealing samples and their functional properties. The occurrence of the remnant polarization in barium hexaferrites at room temperature contradicts the description of their crystal structure in the framework of centrosymmetric space group P63∕mmc (No. 194), in which one of the symmetry operations is inversion center. Therefore, the crystal structure of BaFe12O19 was analyzed in the frameworks of SG P63∕mmc (No. 194) and non-centrosymmetric SG P63mc (No. 186). The computed value of polarization for a non-centrosymmetric unit cell is ∼ 3.5 μC∕cm2. The analysis of polarization was carried out on a path connecting the polar P63mc and non-polar P63∕mmc structures and considered in terms of the total energy barrier. Our result allows ascertaining a direct relationship between the remnant polarization of the unit cell and the broken spatial-inversion symmetry in the crystal structure of M-type barium hexaferrite., This project has received funding from the EU - H2020 research and innovation programme under grant agreement No 654360 having benefitted from the access provided by CSIC/ICMAB in Barcelona (ES) within the framework of the Nanoscience Foundries and Fine Analysis (NFFA: ID 1026) Europe Transnational Access Activity. (European grants to support the infrastructure of European centres of collective usage and mobile activity of researchers). Alex V. Trukhanov thanks NUST MISIS for support within the framework of the “Priority 2030″ (K6-2022-043). The authors thank to Dr. D.B. Migas for help with calculations of initial crystal structures., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural peculiarities of ε-Fe2O3/GaN epitaxial layers unveiled by high-resolution transmission electron microscopy and neutron reflectometry

  • Suturin, Sergey M.
  • Dvortsova, Polina A.
  • Snigirev, Leonid A.
  • Ukleev, Victor A.
  • Hanashima, Takayasu
  • Rosado, Marcos
  • Ballesteros, Belén
The present paper is dedicated to the structural study of crystallographic peculiarities appearing in epitaxial films of metastable epsilon iron oxide (ε-FeO) grown by pulsed laser deposition onto a semiconductor GaN (0001) substrate. The columnar structure of the nanoscale ε-FeO films has been for the first time investigated using high resolution electron microscopy (HRTEM) direct space technique complemented by reciprocal space methods of high-energy electron diffraction and color-enhanced HRTEM image Fourier filtering. The study of ε-FeO / GaN interface formation has been further expanded by carrying out a depth resolved analysis of density and chemical composition by neutron reflectometry and energy-dispersive X-ray spectroscopy. The obtained results shed light onto the properties and the origin of the enigmatic few-nanometer thick low density transition layer residing at the ε-FeO / GaN interface. A detailed knowledge of the properties of this layer is believed to be highly important for the development of ε-FeO / GaN heterostructures that can potentially become part of the iron-oxide based ferroic-on-semiconductor devices with room temperature magneto-electric coupling., The electron microscopy measurements have been supported through EU’s Framework Program Project No. 654360 Nanoscience Foundries and Fine Analysis—Europe (NFFA Europe), NFFA ID 820. Sample preparation for TEM has been performed on the equipment of “Material science and characterization in advanced technology” Federal Joint Research Center supported by the Ministry of Education and Science of the Russian Federation (id RFMEFI62119X0021). The part of the study related to neutron reflectometry was supported by SNSF Projects No. 200021_188707 and Sinergia CRSII5-171003 Nano Skyrmionics. ICN2 acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV2017-0706). BB acknowledges funding from Generalitat de Catalunya SGR 327. Sergey Suturin and Polina Dvortsova acknowledge support from the Ministry of Science and Higher Education of the Russian Federation (agreement No. 075-15-2021-1349) of the part of the work related to epitaxial growth of ferrimagnetic epsilon ferrite films, their structural characterization by RHEED, and HRTEM image analysis.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of ion irradiation on the surface electronic structure of epitaxial lanthanum nickelate films

  • Sharma, Vishal
  • Singh, Inderpal
  • Sunidhi
  • Arora, Sunil K.
  • Sánchez Barrera, Florencio
  • Singh, Fouran
  • Tripathi, Shilpa
  • Jha, S.N.
We studied the influence of Ag15+ (200 MeV) ion irradiation on the surface electronic structure of an epitaxial LaNiO3 films on a (100) oriented LaAlO3 substrate, using surface sensitive La (4d to 4f) and Ni (3p to 3d) photoemission transitions in the pristine, highest (1012 ions/cm2), medium (5 × 1011 ions/cm2), and lowest (1011 ions/cm2) ion-doses of irradiation. The Super-Coster Kronig induced slight enhancement in the spectral features around ∼115–116 eV photon energy for La (4d to 4f) transitions were observed, with absence of such enhancement for Ni (3p to 3d) transitions in the pristine and irradiated samples. Moreover, an alteration in the constant initial state (CIS) spectra for La (4d to 4f) transitions and presence of a surface states close to the Fermi level in the valence band spectra for Ni (3p to 3d) transitions, with a different ion-doses found to be associated with the oxygen vacancies. Interestingly for Ni (3p to 3d) transition spectra, the density of states (DOS) at the Fermi Level was found to increase orderly with the irradiation dose, and a systematic correlation between the DOS at Fermi level and the surface states was found in the pristine and irradiated samples. For the highest dose sample, the surface states lie above the Fermi level has highest DOS at the Fermi level, which is due to upward shift of the surface states towards the Fermi level with an increase in the irradiation dose., This project has received funding from EU-H2020 research and innovation program under grant agreement No. 654360 within NFFA- Europe transnational access activity. We thanks Inter-University Accelerator center (IUAC), New Delhi, India, for providing access to ion- irradiation facility under duly approved projects IUAC/XIII.7/UFR-62333 and IUAC/XIII.3A/64207/MS (BTR-2). We also thanks Raja Ramanna center for Advanced Technology (RRCAT), Indore (India) for providing access to valence band spectroscopy measurements at INDUS-1. Vishal Sharma expresses his gratitude to Panjab University, Chandigarh (1019–40/Estt.-I dated 16/02/2017) and thereafter UGC-DAE CSR Indore (CSR-IC/BL-09/CRS-106/2019–20/202) for providing fellowship for carrying out research work. Ms. Sunidhi expresses her thanks to UGC, New Delhi for providing fellowship for research work. F. Sánchez acknowledges financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019–000917-SMCIN AEI/10.13039/501100011033) and PID2020112548RB (MCIN/AEI/ 0.13039 /5011 000110 33)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-cost, high-yield zinc oxide-based nanostars for alkaline overall water splitting

  • Di Mari, Gisella Maria
  • Spadaro, Maria Chiara
  • Salutari, Francesco
  • Arbiol, Jordi
  • Bruno, Luca
  • Mineo, Giacometta
  • Bruno, Elena
  • Strano, Vincenzina
  • Mirabella, Salvo
The investigation of high-efficiency and sustainable electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline media is critical for renewable energy technologies. Here, we report a low-cost and high-yield method to obtain ZnOHF-ZnO-based 2D nanostars (NSs) by means of chemical bath deposition (CBD). The obtained NSs, cast onto graphene paper substrates, were used as active materials for the development of a full water splitting cell. For the HER, NSs were decorated with an ultralow amount of Pt nanoparticles (11.2 μg cm–2), demonstrating an overpotential of 181 mV at a current density of 10 mA cm–2. The intrinsic activity of Pt was optimized, thanks to the ZnO supporting nanostructures, as outlined by the mass activity of Pt (0.9 mA mgPt–1) and its turnover frequency (0.27 s–1 for a Pt loading of 11.2 μg cm–2). For the OER, bare NSs showed a remarkable result of 355 mV at 10 mA cm–2 in alkaline media. Pt-decorated and bare NSs were used as the cathode and anode, respectively, for alkaline electrochemical water splitting, assessing a stable overpotential of 1.7 V at a current density of 10 mA cm–2. The reported data pave the way toward large-scale production of low-cost electrocatalysts for green hydrogen production., This work has been partially funded by European Union (NextGeneration EU), through the MUR-PNRR project SAMOTHRACE (ECS00000022), by programma ricerca di Ateneo UNICT 2020-22 linea 2 PIA.CE.RI ″NaTI4Smart Sviluppo di NAnomateriali e Tecnologie Innovative per Smart detection″, and by PRIN 2017 “CLEAN-Valorizing Sustainable Plastics through a CLEver use of NANoparticles” 20174FSRZS_003. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. The authors thank support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement no. 654360 NFFA-Europe., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D superconducting hollow nanowires with tailored diameters grown by focused He+ beam direct writing

  • Córdoba, Rosa
  • Ibarra, Alfonso
  • Mailly, Dominique
  • Guillamón, Isabel
  • Suderow, Hermann
  • Teresa, José María de
Currently, the patterning of innovative three-dimensional (3D) nano-objects is required for the development of future advanced electronic components. Helium ion microscopy in combination with a precursor gas can be used for direct writing of three-dimensional nanostructures with a precise control of their geometry, and a significantly higher aspect ratio than other additive manufacturing technologies. We report here on the deposition of 3D hollow tungsten carbide nanowires with tailored diameters by tuning two key growth parameters, namely current and dose of the ion beam. Our results show the control of geometry in 3D hollow nanowires, with outer and inner diameters ranging from 36 to 142 nm and from 5 to 28 nm, respectively; and lengths from 0.5 to 8.9 µm. Transmission electron microscopy experiments indicate that the nanowires have a microstructure of large grains with a crystalline structure compatible with the face-centered cubic WC1- x phase. In addition, 3D electron tomographic reconstructions show that the hollow center of the nanowires is present along the whole nanowire length. Moreover, these nanowires become superconducting at 6.8 K and show high values of critical magnetic field and critical current density. Consequently, these 3D nano-objects could be implemented as components in the next generation of electronics, such as nano-antennas and sensors, based on 3D superconducting architectures., This work was supported by the financial support from Spanish Ministry of Economy and Competitiveness through the projects MAT2017-82970-C2-2-R, PIE201760E027, including FEDER funding, FIS2017-84330-R, CEX2018-000805-M, EU ERC (Grant Agreement No. 679080), from the EU-H2020 research and innovation programme under grant agreement No 654360 NFFA-Europe, and Nanocohybri COST CA-16218, from regional Gobierno de Aragón (grants E13_20R and E28-20R) with European Social Fund (Construyendo Europa desde Aragón) and Comunidad de Madrid through project NANOMAGCOST-CM (Grant No. (S2018/NMT-4321)). The project that gave rise to these results received the support of a fellowship from ”la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/PR19/11700008. The French RENATECH network (French national nanofabrication platform)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000805-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxygen-promoted on-surface synthesis of polyboroxine molecules

  • Toffoli, Daniele
  • Turco, Elia
  • Stredansky, Matus
  • Costantini, Roberto
  • Dell’Angela, Martina
  • Floreano, Luca
  • Goldoni, Andrea
  • Morgante, Alberto
  • Kladnik, Gregor
  • Cvetko, Dean
  • Oteyza, Dimas G. de
  • Colazzo, Luciano
  • Mohammed, Mohammed S. G.
  • Sala, Alessandro
  • Comelli, Giovanni
  • Africh, Cristina
  • Fronzoni, Giovanna
  • Balducci, Gabriele
  • Stener, Mauro
  • Ustunel, Hande
  • Cossaro, Albano
We present a protocol for the on-surface synthesis of polyboroxine molecules derived from boroxine molecules precursors. This process is promoted by oxygen species present on the Au(111) surface: oxygen atoms facilitate the detachment of naphthalene units of trinaphthyl-boroxine molecules and bridge two unsaturated boroxine centers to form a boroxine-O-boroxine chemical motif. X-ray spectroscopic characterization shows that, as the synthesis process proceeds, it progressively tunes the electronic properties of the interface, thus providing a promising route to control the electron level alignment., Financial support from ICSC Centro Nazionale di Ricerca in High Performance Computing, Big Data and Quantum Computing, funded by European Union Next Generation EU is gratefully acknowledged. We furthermore acknowledge the CINECA award under the ISCRA initiative, for the availability of high-performance computing resources and support. DC and GK acknowledge financial support of the Slovenian Research Agency through research program, grant number P1-0112. GK acknowledges financial support of the Slovenian Research Agency through research projects, grant numbers J1-3007 and J2-2514. This project has received funding from the EU−H2020 research and innovation programme under grant agreement No 654360 having benefitted from the access provided by CNR-IOM in Trieste within the framework of the NFFA-Europe Transnational Access Activity. We also acknowledge the financial support from MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR (TED2021-132388B−C43), and from MCIN/AEI/10.13039/501100011033/ERDF/EU (PID2022-140845OB−C64)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal scanning probe lithography for the directed self-assembly of block copolymers

  • Gottlieb, S
  • Lorenzoni, M
  • Evangelio, Laura
  • Fernández-Regúlez, Marta
  • Ryu, Y K
  • Rawlings, C
  • Spieser, M
  • Knoll, A W
  • Perez Murano, Francesc X.
Thermal scanning probe lithography (t-SPL) is applied to the fabrication of chemical guiding patterns for directed self-assembly (DSA) of block copolymers (BCP). The two key steps of the overall process are the accurate patterning of a poly(phthalaldehyde) resist layer of only 3.5 nm thickness, and the subsequent oxygen-plasma functionalization of an underlying neutral poly(styrene-random-methyl methacrylate) brush layer. We demonstrate that this method allows one to obtain aligned line/space patterns of poly(styrene-block-methyl methacrylate) BCP of 18.5 and 11.7 nm half-pitch. Defect-free alignment has been demonstrated over areas of tens of square micrometres. The main advantages of t-SPL are the absence of proximity effects, which enables the realization of patterns with 10 nm resolution, and its compatibility with standard DSA methods. In the brush activation step by oxygen-plasma exposure, we observe swelling of the brush. This effect is discussed in terms of the chemical reactions occurring in the exposed areas. Our results show that t-SPL can be a suitable method for research activities in the field of DSA, in particular for low-pitch, high-χ BCP to achieve sub-10 nm line/space patterns., This project is partially funded by the EU projects SNM (grant agreement no. 318804) and NFFA (grant agreement no. 654360), and by the Spanish NANOINTEGRA (TEC2015-69864-R). We would like to acknowledge Chris-tophe Navarro and Celia Nicolet from Arkema for supplying some of the polymers used in this work. We would also like to thank Charlotte Bolliger for proofreading the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-Chip Thermoelectric Devices Based on Standard Silicon Processing

  • Dimaggio, Elisabetta
  • Masci, Antonella
  • De Seta, Amedeo
  • Salleras, Marc
  • Fonseca, Luis
  • Pennelli, Giovanni
The strong reduction of thermal conductivity with respect to bulk silicon makes nanostructured silicon one of the best materials for highly efficient direct conversion of heat into electrical power and vice-versa. The widespread technologies for the integration of silicon devices can be used to define on-chip micro thermoelectric generators (scavengers); similar structures could also be used for precise and well-localized cooling through the reverse process of heat pumping. However, the road to the fabrication of integrated thermal energy scavengers or cooler, based on silicon, is still very long. In this work, the design and the fabrication process of on-chip thermoelectric devices based on a large number of interconnected monocrystalline silicon nanobeams, very tall (>1 µm) and thin (less than 200 nanometers), arranged in large areas combs is shown. The small width of the nanobeams gives a reduced thermal conductivity, and the height perpendicular to the substrate allows the definition of a highly dense collection of nanostructures. The total cross-section is far broader than that of other nanostructures, a characteristic that guarantees both mechanical stability and larger deliverable power per unit area., This project received funding from the EU-H2020 research and innova- tion programme (grant agreement No 654360) having benefitted from the access provided by CSIC (IMB-CNM) Cerdanyola del Valles, Spain within the framework of the NFFA Europe Transnational Access Activity. Authors gratefully acknowledge Miguel Zabala, Roser Mas, and the staff of the SBCNM for the kind support. Authors gratefully acknowledge the Italian Ministry of Education and Research (MIUR) in the framework of the Piano Nazionale di Ricerca e Resilienza (PNRR) (DOTT DM351, CN00000013) and the FoReLab project (Departments of Excellence). Open access publishing facilitated by Universita degli Studi di Pisa, as part of the Wiley - CRUI-CARE agreement, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interfacial electronic structure in hybrid HfO2-Graphene nanostructures

  • Akhtar, Arsalan
  • Rauwel, Protima
  • Rauwel, Erwan
  • Pruneda, Miguel
Data will be made available on request., We investigate the interaction between cubic phase HfO2 and graphene-based nanocomposites and examine the effects of carbon and oxygen vacancies on the properties of the nanomaterial. According to our ab initio calculations, the electronic structure of the nanocomposite is greatly influenced by the presence of oxygen vacancies in HfO2 that enhances charge transfer to the graphene layer. Our simulations also highlight the importance of defects on the carbon nanostructure that act as anchor sites for the cling of the oxide nanoparticle. These findings support experimental observations that suggest that the presence of defects on HfO2-graphenic nanocomposites is essential to explain their optoelectronic characteristics, and provides insights into optimization schemes for use in cutting-edge electronic and photonic devices., The authors acknowledge EU H2020 project NFFA (Grant No. 654360) under Transnational Access Activity ID-1029. M.P. acknowledges support from PID2022-139776NB-C61, funded by MCIN/AEI/10.13039/501100011033/FEDER. ICN2 is funded by the CERCA Programme from Generalitat de Catalunya, has been supported by the Severo Ochoa Centres of Excellence programme [SEV-2017-0706], and is currently supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, both funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Functional protein-based nanomaterial produced in microorganisms recognized as safe: A new platform for biotechnology

  • Cano Garrido, Olivia
  • Sanchez Chardi, Alejandro
  • Parés, Silvia
  • Giró, Irene
  • Tatkiewicz, Witold I.
  • Ferrer Miralles, Neus
  • Ratera, Imma
  • Natalello, Antonino
  • Cubarsí Morera, Rafael|||0000-0001-7748-1322
  • Veciana Miró, Jaume
  • Bach, Alex
  • Villaverde Corrales, Antonio Pedro
  • Arís, Anna
  • García Fruitós, Elena
Inclusion bodies (IBs) are protein-based nanoparticles formed in Escherichia coli through stereospecific aggregation processes during the overexpression of recombinant proteins. In the last years, it has been shown that IBs can be used as nanostructured biomaterials to stimulate mammalian cell attachment, proliferation, and differentiation. In addition, these nanoparticles have also been explored as natural delivery systems for protein replacement therapies. Although the production of these protein-based nanomaterials in E. coli is economically viable, important safety concerns related to the presence of endotoxins in the products derived from this microorganism need to be addressed. Lactic acid bacteria (LAB) are a group of food-grade microorganisms that have been classified as safe by biologically regulatory agencies. In this context, we have demonstrated herein, for the first time, the production of fully functional, IB-like protein nanoparticles in LAB. These nanoparticles have been fully characterized using a wide range of techniques, including field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, zymography, cytometry, confocal microscopy, and wettability and cell coverage measurements. Our results allow us to conclude that these materials share the main physico-chemical characteristics with IBs from E. coli and moreover are devoid of any harmful endotoxin contaminant. These findings reveal a new platform for the production of protein-based safe products with high pharmaceutical interest., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A model study on controlling dealloying corrosion attack by lateral modification of surfactant inhibitors

  • Bertran Cànovas, Òscar|||0000-0002-3689-1429
  • Crespo Artiaga, Daniel|||0000-0003-1743-2400
  • Kokalj, Anton
  • Renner, Frank U.
  • Losada Perez, Patricia
  • Neupane, Shova
  • Rivas, Nicolás A.
  • D'Haen, Jan
  • Noei, Heshmat
  • Keller, Thomas
  • Stierle, Andreas
  • Rudolph, Michael
  • Terfort, Andreas
Detrimental corrosion is an ever-concerning challenge for metals and alloys. One possible remedy is to apply organic corrosion inhibitors. Despite progress in molecular assembly and inhibitor research, better mechanistic insight on the molecular level is needed. Here we report on the behavior of well-defined artificial molecular interfaces created by micro-contact printing of thiol-inhibitor molecules and subsequent backfilling. The obtained heterogeneity and defects trigger localized dealloying-corrosion of well-defined Cu3Au surfaces. The stability of applied inhibitor molecules depends on alloy surface morphology and on intermolecular forces of the molecular layers., Financial support by FWO Odysseus program under the G0D0115N project is appreciated. We acknowledge the support of FWO for the joint-focused ion beam (FIB) facility for nanofabrication and nanocharacterization (AKUL-15-22). We also thank for support via the M-era.Net project CoinDesc. This project has received technical support from the EU-H2020 research and innovation program under grant agreement No. 654360, Nanoscience Foundries, and Fine Analysis (NFFA). We acknowledge the use of the FIB dual-beam instrument granted by BMBF under grant no. 5K13WC3 (PT-DESY). At UPC, we acknowledge MINECO projects PCIN-2016-027 and FIS2017-82625-P
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Epitaxial La0.7Sr0.3MnO3 thin films on silicon with excellent magnetic and electric properties by combining physical and chemical methods

  • Vila-Fungueirino, J.M.
  • Gazquez, J.
  • Magen, C.
  • Saint-Girons, G.
  • Bachelet, R.
  • Carretero-Genevrier, A.
Half-metallic ferromagnetic La0.7Sr0.3MnO3 (LSMO) represents an appealing candidate to be integrated on silicon substrates for technological devices such as sensors, data storage media, IR detectors, and so on. Here, we report high-quality epitaxial LSMO thin films obtained by an original combination of chemical solution deposition (CSD) and molecular beam epitaxy (MBE). A detailed study of the thermal, chemical, and physical compatibility between SrTiO3 (STO)/Si buffer layers and LSMO films, grown by MBE and CSD, respectively, enables a perfect integration of both materials. Importantly, we show a precise control of the coercive field of LSMO films by tuning the mosaicity of the STO/Si buffer layer. These results demonstrate the enormous potential of combining physical and chemical processes for the development of low-cost functional oxide-based devices compatible with the complementary metal oxide semiconductor technology. [GRAPHICS] .
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Vertical Growth of Superconducting Crystalline Hollow Nanowires by He+ Focused Ion Beam Induced Deposition

  • Córdoba, R.
  • Ibarra, A.
  • Mailly, D.
  • De Teresa, J.M.
Novel physical properties appear when the size of a superconductor is reduced to the nanoscale, in the range of its superconducting coherence length (¿0). Such nanosuperconductors are being investigated for potential applications in nanoelectronics and quantum computing. The design of three-dimensional nanosuperconductors allows one to conceive novel schemes for such applications. Here, we report for the first time the use of a He+ focused-ion-beam-microscope in combination with the W(CO)6 precursor to grow three-dimensional superconducting hollow nanowires as small as 32 nm in diameter and with an aspect ratio (length/diameter) of as much as 200. Such extreme resolution is achieved by using a small He+ beam spot of 1 nm for the growth of the nanowires. As shown by transmission electron microscopy, they display grains of large size fitting with face-centered cubic WC1-x phase. The nanowires, which are grown vertically to the substrate, are felled on the substrate by means of a nanomanipulator for their electrical characterization. They become superconducting at 6.4 K and show large critical magnetic field and critical current density resulting from their quasi-one-dimensional superconducting character. These results pave the way for future nanoelectronic devices based on three-dimensional nanosuperconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Direct and converse piezoelectric responses at the nanoscale from epitaxial BiFeO3 thin films grown by polymer assisted deposition

  • Vila-Fungueiriño, J.M.
  • Gómez, A.
  • Antoja-Lleonart, J.
  • Gázquez, J.
  • Magén, C.
  • Noheda, B.
  • Carretero-Genevrier, A.
We use an original water-based chemical method to grow pure epitaxial BiFeO3 (BFO) ultra-thin films with excellent piezoelectric properties. Particularly, we show that this novel chemical route produces higher natural ferroelectric domain size distribution and coercive field compared to similar BFO films grown by physical methods. Moreover, we measured the d33 piezoelectric coefficient of 60 nm thick BFO films by a direct approach, using Direct Piezoelectric Force Microscopy (DPFM). As a result, first piezo-generated charge maps of a very thin BFO layer were obtained applying this novel technology. We also performed a comparative study of the d33 coefficients between standard PFM analysis and DPFM microscopy showing similar values i.e. 17 pm V-1 and 22 pC N-1, respectively. Finally, we proved that the directionality of the piezoelectric effect in BFO ferroelectric thin films is preserved at low thickness dimensions demonstrating the potential of chemical processes for the development of low cost functional ferroelectric and piezoelectric devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

3D superconducting hollow nanowires with tailored diameters grown by focused He+ beam direct writing

  • Cordoba, R.
  • Ibarra, A.
  • Mailly, D.
  • Guillamon, I.
  • Suderow, H.
  • De Teresa, J.M.
Currently, the patterning of innovative three-dimensional (3D) nano-objects is required for the development of future advanced electronic components. Helium ion microscopy in combination with a precursor gas can be used for direct writing of three-dimensional nanostructures with a precise control of their geometry, and a significantly higher aspect ratio than other additive manufacturing technologies. We report here on the deposition of 3D hollow tungsten carbide nanowires with tailored diameters by tuning two key growth parameters, namely current and dose of the ion beam. Our results show the control of geometry in 3D hollow nanowires, with outer and inner diameters ranging from 36 to 142 nm and from 5 to 28 nm, respectively; and lengths from 0.5 to 8.9 mu m. Transmission electron microscopy experiments indicate that the nanowires have a microstructure of large grains with a crystalline structure compatible with the face-centered cubic WC1-x phase. In addition, 3D electron tomographic reconstructions show that the hollow center of the nanowires is present along the whole nanowire length. Moreover, these nanowires become superconducting at 6.8 K and show high values of critical magnetic field and critical current density. Consequently, these 3D nano-objects could be implemented as components in the next generation of electronics, such as nano-antennas and sensors, based on 3D superconducting architectures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Three-Dimensional Superconducting Nanohelices Grown by He+-Focused-Ion-Beam Direct Writing

  • Córdoba, R.
  • Mailly, D.
  • Rezaev, R.O.
  • Smirnova, E.I.
  • Schmidt, O.G.
  • Fomin, V.M.
  • Zeitler, U.
  • Guillamón, I.
  • Suderow, H.
  • De Teresa, J.M.
Novel schemes based on the design of complex three-dimensional (3D) nanoscale architectures are required for the development of the next generation of advanced electronic components. He+ focused-ion-beam (FIB) microscopy in combination with a precursor gas allows one to fabricate 3D nanostructures with an extreme resolution and a considerably higher aspect ratio than FIB-based methods, such as Ga+ FIB-induced deposition, or other additive manufacturing technologies. In this work, we report the fabrication of 3D tungsten carbide nanohelices with on-demand geometries via controlling key deposition parameters. Our results show the smallest and highest-densely packed nanohelix ever fabricated so far, with dimensions of 100 nm in diameter and aspect ratio up to 65. These nanohelices become superconducting at 7 K and show a large critical magnetic field and critical current density. In addition, given its helical 3D geometry, fingerprints of vortex and phase-slip patterns are experimentally identified and supported by numerical simulations based on the time-dependent Ginzburg-Landau equation. These results can be understood by the helical geometry that induces specific superconducting properties and paves the way for future electronic components, such as sensors, energy storage elements, and nanoantennas, based on 3D compact nanosuperconductors.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Functional protein-based nanomaterial produced in microorganisms recognized as safe: A new platform for biotechnology

  • Cano Garrido, Olivia
  • Sanchez Chardi, Alejandro
  • Parés, Silvia
  • Giró, Irene
  • Tatkiewicz, Witold I.
  • Ferrer Miralles, Neus
  • Ratera, Imma
  • Natalello, Antonino
  • Cubarsí Morera, Rafael
  • Veciana Miró, Jaume
  • Bach, Alex
  • Villaverde Corrales, Antonio Pedro
  • Arís, Anna
  • García Fruitós, Elena
Inclusion bodies (IBs) are protein-based nanoparticles formed in Escherichia coli through stereospecific aggregation processes during the overexpression of recombinant proteins. In the last years, it has been shown that IBs can be used as nanostructured biomaterials to stimulate mammalian cell attachment, proliferation, and differentiation. In addition, these nanoparticles have also been explored as natural delivery systems for protein replacement therapies. Although the production of these protein-based nanomaterials in E. coli is economically viable, important safety concerns related to the presence of endotoxins in the products derived from this microorganism need to be addressed. Lactic acid bacteria (LAB) are a group of food-grade microorganisms that have been classified as safe by biologically regulatory agencies. In this context, we have demonstrated herein, for the first time, the production of fully functional, IB-like protein nanoparticles in LAB. These nanoparticles have been fully characterized using a wide range of techniques, including field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, zymography, cytometry, confocal microscopy, and wettability and cell coverage measurements. Our results allow us to conclude that these materials share the main physico-chemical characteristics with IBs from E. coli and moreover are devoid of any harmful endotoxin contaminant. These findings reveal a new platform for the production of protein-based safe products with high pharmaceutical interest., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hydrotalcite-embedded magnetite nanoparticles for hyperthermia-triggered chemotherapy

  • Simeonidis, Konstantinos
  • Kaprara, Efthimia
  • Rivera Gil, Pilar, 1976-
  • Xu, Ruixue
  • Teran, Francisco J.
  • Kokkinos, Evgenios
  • Mitropoulos, Athanassios
  • Maniotis, Nikolaos
  • Balcells, Lluis
A magnetic nanocomposite, consisting of Fe3O4 nanoparticles embedded into a Mg/Al layered double hydroxide (LDH) matrix, was developed for cancer multimodal therapy, based on the combination of local magnetic hyperthermia and thermally induced drug delivery. The synthesis procedure involves the sequential hydrolysis of iron salts (Fe2+, Fe3+) and Mg2+/Al3+ nitrates in a carbonate-rich mild alkaline environment followed by the loading of 5-fluorouracil, an anionic anticancer drug, in the interlayer LDH space. Magnetite nanoparticles with a diameter around 30 nm, dispersed in water, constitute the hyperthermia-active phase able to generate a specific loss of power of around 500 W/g-Fe in an alternating current (AC) magnetic field of 24 kA/m and 300 kHz as determined by AC magnetometry and calorimetric measurements. Heat transfer was found to trigger a very rapid release of drug which reached 80% of the loaded mass within 10 min exposure to the applied field. The potential of the Fe3O4/LDH nanocomposites as cancer treatment agents with minimum side-effects, owing to the exclusive presence of inorganic phases, was validated by cell internalization and toxicity assays., The project was financially supported by Stavros Niarchos Foundation and Eastern Macedonia and Thrace Institute of Technology fellowships for assisting young scientists in prototyping innovative products by using cutting-edge technology. Specific measurements received funding from the EU-H2020 research and innovation programme under grant agreement No. 654360 having benefitted from the access provided by ICMAB-CSIC and Universitat Autonoma de Barcelona in Bellaterra-Barcelona within the framework of the NFFA-Europe Transnational Access Activity. Authors would like to thank Anna Esther Carrillo for the experimental assistance during SEM observations and Bernat Bozzo for the support in SQUID measurements. This work was partially funded by Spanish Ministry of Science, Innovation and Universities (MAT2017-85617-R, SEV-2016-0686, RED2018-102626-T) and Comunidad de Madrid (NANOMAGCOST). COST Actions CA17115 (MyWave), and CA17140 (Nano2Clinic) are also acknowledged. The UPF acknowledges the Ministry of Science, Innovation and Universities (MICINN) and the AEI (RYC-2012-10059, MDM-2014-0370-04, CTQ2013-45433-PFEDER], MAT2016-75362-C3-2-R, AEI-SAF2015-73052-EXP) and the AGAUR (2017 SGR 1054) for financial support.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A model study on controlling dealloying corrosion attack by lateral modification of surfactant inhibitors

  • Bertran Cànovas, Òscar
  • Crespo Artiaga, Daniel
  • Kokalj, Anton
  • Renner, Frank U.
  • Losada Perez, Patricia
  • Neupane, Shova
  • Rivas, Nicolás A.
  • D'Haen, Jan
  • Noei, Heshmat
  • Keller, Thomas
  • Stierle, Andreas
  • Rudolph, Michael
  • Terfort, Andreas
Detrimental corrosion is an ever-concerning challenge for metals and alloys. One possible remedy is to apply organic corrosion inhibitors. Despite progress in molecular assembly and inhibitor research, better mechanistic insight on the molecular level is needed. Here we report on the behavior of well-defined artificial molecular interfaces created by micro-contact printing of thiol-inhibitor molecules and subsequent backfilling. The obtained heterogeneity and defects trigger localized dealloying-corrosion of well-defined Cu3Au surfaces. The stability of applied inhibitor molecules depends on alloy surface morphology and on intermolecular forces of the molecular layers., Financial support by FWO Odysseus program under the G0D0115N project is appreciated. We acknowledge the support of FWO for the joint-focused ion beam (FIB) facility for nanofabrication and nanocharacterization (AKUL-15-22). We also thank for support via the M-era.Net project CoinDesc. This project has received technical support from the EU-H2020 research and innovation program under grant agreement No. 654360, Nanoscience Foundries, and Fine Analysis (NFFA). We acknowledge the use of the FIB dual-beam instrument granted by BMBF under grant no. 5K13WC3 (PT-DESY). At UPC, we acknowledge MINECO projects PCIN-2016-027 and FIS2017-82625-P, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Functional protein-based nanomaterial produced in GRAS microorganism, a new platform for biotechnology

  • Cano-Garrido, Olivia|||0000-0002-5504-2131
  • Sánchez Chardi, Alejandro|||0000-0002-8789-1883
  • Parés, Sílvia
  • Giro Paradell, Irene
  • Tatkiewicz, Witold I.|||0000-0003-1349-2174
  • Ferrer-Miralles, Neus|||0000-0003-2981-3913
  • Ratera Bastardas, Imma|||0000-0002-1464-9789
  • Natalello, Antonino|||0000-0002-1489-272X
  • Cubarsi, Rafael
  • Veciana i Miró, Jaume|||0000-0003-1023-9923
  • Bach, Àlex|||0000-0001-6804-2002
  • Villaverde, Antonio|||0000-0002-2615-4521
  • Arís i Giralt, Anna|||0000-0001-7830-888X
  • Garcia-Fruitos, Elena|||0000-0001-7498-4864
Inclusion bodies (IBs) are protein-based nanoparticles formed in Escherichia coli through stereospecific aggregation processes during the overexpression of recombinant proteins. In the last years, it has been shown that IBs can be used as nanostructured biomaterials to stimulate mammalian cell attachment, proliferation, and differentiation. In addition, these nanoparticles have also been explored as natural delivery systems for protein replacement therapies. Although the production of these protein-based nanomaterials in E. coli is economically viable, important safety concerns related to the presence of endotoxins in the products derived from this microorganism need to be addressed. Lactic acid bacteria (LAB) are a group of food-grade microorganisms that have been classified as safe by biologically regulatory agencies. In this context, we have demonstrated herein, for the first time, the production of fully functional, IB-like protein nanoparticles in LAB. These nanoparticles have been fully characterized using a wide range of techniques, including field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, zymography, cytometry, confocal microscopy, and wettability and cell coverage measurements. Our results allow us to conclude that these materials share the main physico-chemical characteristics with IBs from E. coli and moreover are devoid of any harmful endotoxin contaminant. These findings reveal a new platform for the production of protein-based safe products with high pharmaceutical interest.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Self-assembly morphology of block copolymers in sub-10 nm topographical guiding patterns

  • Gottlieb, Steven|||0000-0003-1642-8602
  • Rösner, Benedikt|||0000-0001-8765-5904
  • Evangelio Araujo, Laura
  • Fernández Regúlez, Marta
  • Nogales, Aurora|||0000-0002-2494-3551
  • García-Gutiérrez, Mari Cruz|||0000-0002-3604-1512
  • Keller, Thomas F.|||0000-0002-3770-6344
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Ezquerra, Tiberio A.
  • David, Christian
  • Pérez Murano, Francesc|||0000-0002-4647-8558
In this paper, we investigate the directed self-assembly of block copolymers in topographical guiding patterns with feature sizes in the range of the block copolymer half-pitch. In particular, we present the self-assembly of an 11.7 nm half-pitch block copolymer in sub-10 nm resolution guiding patterns fabricated by the direct e-beam exposure of hydrogen silsesquioxane (HSQ). One result of this analysis is that the block copolymer self-assembles such that the guiding pattern features form part of the 3-D architecture of the film. We are capable of determining a shift in the block copolymer pitch as a function of the guiding pattern pitch with sub-nanometer accuracy by means of both real-space (AFM, SEM) and reciprocal-space techniques (GISAXS). An interesting result is that the block copolymer self-assembly in the studied structures depends on the guiding pattern pitch rather than on the trench width as in standard graphoepitaxy. We analyze the structures by means of a free energy model and present both theoretical and experimental evidence of a narrower processing window for such kind of guiding patterns than for regular directed self-assembly using wide topographical guiding patterns, and discuss the origin of this effect. We argue that chain deformation in the vicinity of the top cap of the guiding pattern feature is responsible for an increase of the free energy of the ordered state, which leads to a smaller energy difference between the defect-free and defective self-assembly than that for the observed self-assembly morphology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Template-Assisted Scalable Nanowire Networks

  • Friedl, Martin
  • Cerveny, Kris
  • Weigele, Pirmin
  • Tütüncüoglu, Gözde
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Huang, Chunyi
  • Patlatiuk, Taras
  • Potts, Heidi A.
  • Sun, Zhiyuan|||0000-0003-3981-9083
  • Hill, Megan O.|||0000-0002-7663-7986
  • Güniat, Lucas|||0000-0001-7883-4433
  • Kim, Wonjong
  • Zamani, Mahdi|||0000-0003-0750-2938
  • Dubrovskii, Vladimir G.|||0000-0003-2088-7158
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Lauhon, Lincoln J.|||0000-0001-6046-3304
  • Zumbühl, Dominik M.
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
Topological qubits based on Majorana Fermions have the potential to revolutionize the emerging field of quantum computing by making information processing significantly more robust to decoherence. Nanowires are a promising medium for hosting these kinds of qubits, though branched nanowires are needed to perform qubit manipulations. Here we report a gold-free templated growth of III-V nanowires by molecular beam epitaxy using an approach that enables patternable and highly regular branched nanowire arrays on a far greater scale than what has been reported thus far. Our approach relies on the lattice-mismatched growth of InAs on top of defect-free GaAs nanomembranes yielding laterally oriented, low-defect InAs and InGaAs nanowires whose shapes are determined by surface and strain energy minimization. By controlling nanomembrane width and growth time, we demonstrate the formation of compositionally graded nanowires with cross-sections less than 50 nm. Scaling the nanowires below 20 nm leads to the formation of homogeneous InGaAs nanowires, which exhibit phase-coherent, quasi-1D quantum transport as shown by magnetoconductance measurements. These results are an important advance toward scalable topological quantum computing.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optical emission of GaN/AlN quantum-wires-the role of charge transfer from a nanowire template

  • Müßener, Jan
  • Greif, Ludwig A. Th.
  • Kalinowski, Stefan
  • Callsen, Gordon|||0000-0001-6390-3977
  • Hille, Pascal
  • Schörmann, Jörg
  • Wagner, Markus R..|||0000-0002-7367-5629
  • Schliwa, Andrei
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hoffmann, Axel
  • Eickhoff, Martin
We show that one-dimensional (1d) GaN quantum-wires (QWRs) exhibit intense and spectrally sharp emission lines. These QWRs are realized in an entirely self-assembled growth process by molecular beam epitaxy (MBE) on the side facets of GaN/AlN nanowire (NW) heterostructures. Time-integrated and time-resolved photoluminescence (PL) data in combination with numerical calculations allow the identification and assignment of the manifold emission features to three different spatial recombination centers within the NWs. The recombination processes in the QWRs are driven by efficient charge carrier transfer effects between the different optically active regions, providing high intense QWR luminescence despite their small volume. This is deduced by a fast rise time of the QWR PL, which is similar to the fast decay-time of adjacent carrier reservoirs. Such processes, feeding the ultra-narrow QWRs with carriers from the relatively large NWs, can be the key feature towards the realization of future QWR-based devices. While processing of single quantum structures with diameters in the nm range presents a serious obstacle with respect to their integration into electronic or photonic devices, the QWRs presented here can be analyzed and processed using existing techniques developed for single NWs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The Role of polarity in nonplanar semiconductor nanostructures

  • De La Mata, Maria|||0000-0002-1581-4838
  • Zamani, Reza|||0000-0001-6940-0000
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Eickhoff, Martin
  • Xiong, Qihua|||0000-0002-2555-4363
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
  • Caroff, Philippe
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The lack of mirror symmetry in binary semiconductor compounds turns them into polar materials, where two opposite orientations of the same crystallographic direction are possible. Interestingly, their physical properties (e.g., electronic or photonic) and morphological features (e.g., shape, growth direction, and so forth) also strongly depend on the polarity. It has been observed that nanoscale materials tend to grow with a specific polarity, which can eventually be reversed for very specific growth conditions. In addition, polar-directed growth affects the defect density and topology and might induce eventually the formation of undesirable polarity inversion domains in the nanostructure, which in turn will affect the photonic and electronic final device performance. Here, we present a review on the polarity-driven growth mechanism at the nanoscale, combining our latest investigation with an overview of the available literature highlighting suitable future possibilities of polarity engineering of semiconductor nanostructures. The present study has been extended over a wide range of semiconductor compounds, covering the most commonly synthesized III-V (GaN, GaP, GaAs, GaSb, InN, InP, InAs, InSb) and II-VI (ZnO, ZnTe, CdS, CdSe, CdTe) nanowires and other free-standing nanostructures (tripods, tetrapods, belts, and membranes). This systematic study allowed us to explore the parameters that may induce polarity-dependent and polarity-driven growth mechanisms, as well as the polarity-related consequences on the physical properties of the nanostructures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optical Analysis of Oxygen Self-Diffusion in Ultrathin CeO2 Layers at Low Temperatures

  • Neuderth, Paula|||0000-0003-3468-2815
  • Hille, Pascal
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • De La Mata, Maria|||0000-0002-1581-4838
  • Coll, Mariona|||0000-0001-5157-7764
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Eickhoff, Martin
An optical in situ strategy for the analysis of oxygen diffusion in ultrathin ceria layers with a thickness of 2-10 nm at temperatures between 50 and 200 °C is presented, which allows for the determination of diffusion coefficients. This method is based on the sensitivity of the photoluminescence (PL) intensity of InGaN nanowires to adsorbed oxygen. The oxygen diffusion through an ultrathin CeO coating deposited on the InGaN nanowires is monitored by analyzing the transient PL behavior of the InGaN nanowires, which responds to changes of the oxygen concentration in the environment when the corresponding oxygen concentration is established at the CeO/InGaN interface due to diffusion through the coating. Quantitative evaluation of the oxygen diffusion in CeO based on a model considering Langmuir Adsorption and recombination yields a diffusion coefficient D of (2.55 ± 0.05) × 10 cm s at a temperature of 100 °C. Temperature-dependent measurements reveal an Arrhenius type behavior of D with an activation energy of (0.28 ± 0.04) eV. In contrast, no oxygen diffusion is detected for an ultrathin layer (≥5 nm) of AlO, which is known as a poor oxygen ion conductor within the analyzed temperature regime.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optimizing the yield of A-polar GaAs nanowires to achieve defect-free zinc blende structure and enhanced optical functionality

  • Zamani, Mahdi|||0000-0003-0750-2938
  • Tütüncüoglu, Gözde
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Francaviglia, Luca|||0000-0002-2138-0837
  • Güniat, Lucas|||0000-0001-7883-4433
  • Ghisalberti, Lea
  • Potts, Heidi A.
  • Friedl, Martin
  • Markov, Edoardo
  • Kim, Wonjong
  • Leran, Jean-Baptiste
  • Dubrovskii, Vladimir G.|||0000-0003-2088-7158
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
Compound semiconductors exhibit an intrinsic polarity, as a consequence of the ionicity of their bonds. Nanowires grow mostly along the (111) direction for energetic reasons. Arsenide and phosphide nanowires grow along (111)B, implying a group V termination of the (111) bilayers. Polarity engineering provides an additional pathway to modulate the structural and optical properties of semiconductor nanowires. In this work, we demonstrate for the first time the growth of Ga-assisted GaAs nanowires with (111)A-polarity, with a yield of up to ∼50%. This goal is achieved by employing highly Ga-rich conditions which enable proper engineering of the energies of A and B-polar surfaces. We also show that A-polarity growth suppresses the stacking disorder along the growth axis. This results in improved optical properties, including the formation of AlGaAs quantum dots with two orders or magnitude higher brightness. Overall, this work provides new grounds for the engineering of nanowire growth directions, crystal quality and optical functionality.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Segregation scheme of indium in AlGaInAs nanowire shells

  • Francaviglia, Luca|||0000-0002-2138-0837
  • Tütüncüoglu, Gözde
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Di Russo, Enrico
  • Escobar Steinvall, Simon|||0000-0003-4993-2979
  • Segura Ruiz, Jaime
  • Potts, Heidi A.
  • Friedl, Martin
  • Rigutti, Lorenzo
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
Quaternary alloys enable the independent optimization of different semiconductor properties, such as the separate tuning of the band gap and the lattice constant. Nanowire core-shell structures should allow a larger range of compositional tuning as strain can be accommodated in a more effective manner than in thin films. Still, the faceted structure of the nanowire may lead to local segregation effects. Here, we explore the incorporation of indium in AlGaAs shells up to 25%. In particular, we show the effect of In incorporation on the energy shift of the AlGaInAs single-photon emitters present in the shell. We observe a redshift up to 300 meV as a function of the group-III site fraction of In. We correlate the shift with segregation at the nanoscale. We find evidence of the segregation of the group-III elements at different positions in the nanowire, not observed before. We propose a model that takes into account the strain distribution in the nanowire shell and the adatom diffusion on the nanowire facets to explain the observations. This work provides novel insights on the segregation phenomena necessary to engineer the composition of multidinary alloys.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Encapsulation of cationic iridium(iii) tetrazole complexes into a silica matrix, synthesis, characterization and optical properties

  • Zanoni, Ilaria|||0000-0001-8692-3460
  • Fiorini, Valentina|||0000-0003-0467-6705
  • Rosado, Marcos|||0000-0003-3938-9132
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Androulidaki, Maria
  • Blosi, Magda|||0000-0001-8841-247X
  • Ortelli, Simona|||0000-0002-0868-3315
  • Stagni, Stefano|||0000-0002-7260-4845
  • Dondi, Michele|||0000-0001-6606-1146
  • Costa, Anna Luisa|||0000-0003-1407-6498
Herein we report the easy incorporation of brightly phosphorescent cationic iridium(iii) tetrazole complexes into a silica based matrix via an easily scalable colloidal process. For this purpose, two cationic Ir(iii) emitters bearing 5-aryl tetrazole ligands (R-CN) were selected: blue [FIrPTZ-Me] (C^N = Fppy; N^N = PTZ-Me-2-(2-methyl-2H-tetrazol-5-yl)pyridine) and red [IrQTZ-Me] (C^N = ppy; N^N = QTZ-Me-2-(2-methyl-2H-tetrazol-5-yl)quinoline). The cationic complexes were readily adsorbed to negatively charged silica nanoparticles and trapped in the sol-gel matrix. The sol-to-solid phase transfer was performed by using an innovative spray-freeze-drying technique, leading to the formation of phosphorescent solid micro-granules. The structural and optical characterisation of the Ir(iii) complexes together with SiO nanoparticles, nanosols (Ir@SiO) and powders (Ir@SiO powders), revealed how the presence of the Ir(iii)-based complexes did not alter the morphology of the colloidal silica or granulated phases. Moreover, the silica matrix did not interfere with the optical properties of the embedded complexes. The distribution of [FIrPTZ-Me] and [IrQTZ-Me] in the spray-freeze-dried powders was qualitatively evaluated by fluorescence microscopy, revealing how the luminescent particles were homogeneously dispersed all over the silica matrix. Interestingly, in aqueous solution the release of complex [FIrPTZ-Me] from the corresponding Ir@SiO powder is almost negligible, therefore suggesting that a strong interaction occurs between the host-silica matrix and the Ir(iii) guest complex.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High-throughput cell motility studies on surface-bound protein nanoparticles with diverse structural and compositional characteristics

  • Tatkiewicz, Witold I.|||0000-0003-1349-2174
  • Seras-Franzoso, Joaquin|||0000-0002-7893-4773
  • Garcia-Fruitos, Elena|||0000-0001-7498-4864
  • Vázquez, Esther|||0000-0003-1052-0424
  • Kyvik, Adriana R.|||0000-0002-6385-7162
  • Ventosa, Nora|||0000-0002-8008-4974
  • Guasch, Judith|||0000-0002-3571-4711
  • Villaverde, Antonio|||0000-0002-2615-4521
  • Veciana i Miró, Jaume|||0000-0003-1023-9923
  • Ratera Bastardas, Imma|||0000-0002-1464-9789
Eighty areas with different structural and compositional characteristics made of bacterial inclusion bodies formed by the fibroblast growth factor (FGF-IBs) were simultaneously patterned on a glass surface with an evaporation-assisted method that relies on the coffee-drop effect. The resulting surface patterned with these protein nanoparticles enabled to perform a high-throughput study of the motility of NIH-3T3 fibroblasts under different conditions including the gradient steepness, particle concentrations, and area widths of patterned FGF-IBs, using for the data analysis a methodology that includes "heat maps". From this analysis, we observed that gradients of concentrations of surface-bound FGF-IBs stimulate the total cell movement but do not affect the total net distances traveled by cells. Moreover, cells tend to move toward an optimal intermediate FGF-IB concentration (i.e., cells seeded on areas with high IB concentrations moved toward areas with lower concentrations and vice versa, reaching the optimal concentration). Additionally, a higher motility was obtained when cells were deposited on narrow and highly concentrated areas with IBs. FGF-IBs can be therefore used to enhance and guide cell migration, confirming that the decoration of surfaces with such IB-like protein nanoparticles is a promising platform for regenerative medicine and tissue engineering.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stable anchoring of bacteria-based protein nanoparticles for surface enhanced cell guidance

  • Martínez Miguel, Marc
  • Kyvik, Adriana R.|||0000-0002-6385-7162
  • Ernst, Lena M.|||0000-0002-5713-7513
  • Martínez Moreno, Albert
  • Cano-Garrido, Olivia|||0000-0002-5504-2131
  • Garcia-Fruitos, Elena|||0000-0001-7498-4864
  • Vázquez, Esther|||0000-0003-1052-0424
  • Ventosa, Nora|||0000-0002-8008-4974
  • Guasch, Judith|||0000-0002-3571-4711
  • Veciana i Miró, Jaume|||0000-0003-1023-9923
  • Villaverde, Antonio|||0000-0002-2615-4521
  • Ratera Bastardas, Imma|||0000-0002-1464-9789
In tissue engineering, biological, physical, and chemical inputs have to be combined to properly mimic cellular environments and successfully build artificial tissues which can be designed to fulfill different biomedical needs such as the shortage of organ donors or the development of in vitro disease models for drug testing. Inclusion body-like protein nanoparticles (pNPs) can simultaneously provide such physical and biochemical stimuli to cells when attached to surfaces. However, this attachment has only been made by physisorption. To provide a stable anchoring, a covalent binding of lactic acid bacteria (LAB) produced pNPs, which lack the innate pyrogenic impurities of Gram-negative bacteria like Escherichia coli, is presented. The reported micropatterns feature a robust nanoscale topography with an unprecedented mechanical stability. In addition, they are denser and more capable of influencing cell morphology and orientation. The increased stability and the absence of pyrogenic impurities represent a step forward towards the translation of this material to a clinical setting.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

GaAs nanoscale membranes, prospects for seamless integration of III-Vs on silicon

  • Raya, Andrés M.|||0000-0002-6619-8967
  • Friedl, Martin
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Dubrovskii, Vladimir G.|||0000-0003-2088-7158
  • Francaviglia, Luca|||0000-0002-2138-0837
  • Alén, Benito
  • Morgan, Nicholas
  • Tütüncüoglu, Gözde
  • Ramasse, Quentin|||0000-0001-7466-2283
  • Fuster Signes, David
  • Llorens, José M.
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
The growth of compound semiconductors on silicon has been widely sought after for decades, but reliable methods for defect-free combination of these materials have remained elusive. Recently, interconnected GaAs nanoscale membranes have been used as templates for the scalable integration of nanowire networks on III-V substrates. Here, we demonstrate how GaAs nanoscale membranes can be seamlessly integrated on silicon by controlling the density of nuclei in the initial stages of growth. We also correlate the absence or presence of defects with the existence of a single or multiple nucleation regime for the single membranes. Certain defects exhibit well-differentiated spectroscopic features that we identify with cathodoluminescence and micro-photoluminescence techniques. Overall, this work presents a new approach for the seamless integration of compound semiconductors on silicon.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Surface-bound gradient deposition of protein nanoparticles for cell motility studies

  • Tatkiewicz, Witold I.|||0000-0003-1349-2174
  • Seras-Franzoso, Joaquin|||0000-0002-7893-4773
  • Garcia-Fruitos, Elena|||0000-0001-7498-4864
  • Vázquez, Esther|||0000-0003-1052-0424
  • Kyvik, Adriana R.|||0000-0002-6385-7162
  • Guasch, Judith|||0000-0002-3571-4711
  • Villaverde, Antonio|||0000-0002-2615-4521
  • Veciana i Miró, Jaume|||0000-0003-1023-9923
  • Ratera Bastardas, Imma|||0000-0002-1464-9789
A versatile evaporation-assisted methodology based on the coffee-drop effect is described to deposit nanoparticles on surfaces, obtaining for the first time patterned gradients of protein nanoparticles (pNPs) by using a simple custom-made device. Fully controllable patterns with specific periodicities consisting of stripes with different widths and distinct nanoparticle concentration as well as gradients can be produced over large areas (∼10 cm²) in a fast (up to 10 mm²/min), reproducible, and cost-effective manner using an operational protocol optimized by an evolutionary algorithm. The developed method opens the possibility to decorate surfaces "a-la-carte" with pNPs enabling different categories of high-throughput studies on cell motility.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The new FAST module, a portable and transparent add-on module for time-resolved investigations with commercial scanning probe microscopes

  • Dri, Carlo|||0000-0001-9040-5746
  • Panighel, Mirco|||0000-0001-8413-5196
  • Tiemann, Daniel
  • Patera, Laerte L.
  • Troiano, Giulia
  • Fukamori, Yves
  • Knoller, Fabian
  • Lechner, Barbara A. J.|||0000-0001-9974-1738
  • Cautero, Giuseppe
  • Giuressi, Dario
  • Comelli, Giovanni
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Africh, Cristina|||0000-0002-1922-2557
  • Esch, Friedrich|||0000-0001-7793-3341
Time resolution is one of the most severe limitations of scanning probe microscopies (SPMs), since the typical image acquisition times are in the order of several seconds or even few minutes. As a consequence, the characterization of dynamical processes occurring at surfaces (e.g. surface diffusion, film growth, self-assembly and chemical reactions) cannot be thoroughly addressed by conventional SPMs. To overcome this limitation, several years ago we developed a first prototype of the FAST module, an add-on instrument capable of driving a commercial scanning tunneling microscope (STM) at and beyond video rate frequencies. Here we report on a fully redesigned version of the FAST module, featuring improved performance and user experience, which can be used both with STMs and atomic force microscopes (AFMs), and offers additional capabilities such as an atom tracking mode. All the new features of the FAST module, including portability between different commercial instruments, are described in detail and practically demonstrated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Localized electronic vacancy level and its effect on the properties of doped manganites

  • Juan, Dilson
  • Pruneda, Miguel|||0000-0002-3621-6095
  • Ferrari, Valeria Paola
Oxygen vacancies are common to most metal oxides and usually play a crucial role in determining the properties of the host material. In this work, we perform ab initio calculations to study the influence of vacancies in doped manganites La Sr MnO , varying both the vacancy concentration and the chemical composition within the ferromagnetic-metallic range (0.2<x<0.5). We find that oxygen vacancies give rise to a localized electronic level and analyse the effects that the possible occupation of this defect state can have on the physical properties of the host. In particular, we observe a substantial reduction of the exchange energy that favors spin-flipped configurations (local antiferromagnetism), which correlate with the weakening of the double-exchange interaction, the deterioration of the metallicity, and the degradation of ferromagnetism in reduced samples. In agreement with previous studies, vacancies give rise to a lattice expansion when the defect level is unoccupied. However, our calculations suggest that under low Sr concentrations the defect level can be populated, which conversely results in a local reduction of the lattice parameter. Although the exact energy position of this defect level is sensitive to the details of the electronic interactions, we argue that it is not far from the Fermi energy for optimally doped manganites (x∼1/3), and thus its occupation could be tuned by controlling the number of available electrons, either with chemical doping or gating. Our results could have important implications for engineering the electronic properties of thin films in oxide compounds.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Heat-Up Colloidal Synthesis of Shape-Controlled Cu-Se-S Nanostructures-Role of Precursor and Surfactant Reactivity and Performance in N Electroreduction

  • Mourdikoudis, Stefanos|||0000-0001-7187-5128
  • Antonaropoulos, George|||0000-0003-0214-8327
  • Antonatos, Nikolas|||0000-0003-2563-9970
  • Rosado, Marcos|||0000-0003-3938-9132
  • Storozhuk, Liudmyla|||0000-0002-9602-4933
  • Takahashi, Mari
  • Maenosono, Shinya
  • Luxa, Jan
  • Sofer, Zdeněk
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Thanh, Nguyen Thi Kim|||0000-0002-4131-5952
  • Lappas, Alexandros|||0000-0001-8486-0312
Copper selenide-sulfide nanostructures were synthesized using metal-organic chemical routes in the presence of Cu- and Se-precursors as well as S-containing compounds. Our goal was first to examine if the initial Cu/Se 1:1 molar proportion in the starting reagents would always lead to equiatomic composition in the final product, depending on other synthesis parameters which affect the reagents reactivity. Such reaction conditions were the types of precursors, surfactants and other reagents, as well as the synthesis temperature. The use of 'hot-injection' processes was avoided, focusing on 'non-injection' ones; that is, only heat-up protocols were employed, which have the advantage of simple operation and scalability. All reagents were mixed at room temperature followed by further heating to a selected high temperature. It was found that for samples with particles of bigger size and anisotropic shape the CuSe composition was favored, whereas particles with smaller size and spherical shape possessed a CuSe phase, especially when no sulfur was present. Apart from elemental Se, AlSe was used as an efficient selenium source for the first time for the acquisition of copper selenide nanostructures. The use of dodecanethiol in the presence of trioctylphosphine and elemental Se promoted the incorporation of sulfur in the materials crystal lattice, leading to Cu-Se-S compositions. A variety of techniques were used to characterize the formed nanomaterials such as XRD, TEM, HRTEM, STEM-EDX, AFM and UV-Vis-NIR. Promising results, especially for thin anisotropic nanoplates for use as electrocatalysts in nitrogen reduction reaction (NRR), were obtained.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magnetic properties of coordination clusters with {Mn4} and {Co4} antiferromagnetic cores

  • Achilli, Simona|||0000-0001-6812-5043
  • Besson, Claire|||0000-0002-0502-3610
  • He, Xu|||0000-0003-4437-0567
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Meyer, Carola|||0000-0003-0851-2767
  • Zanolli, Zeila|||0000-0003-0860-600X
We present a joint experimental and theoretical characterization of the magnetic properties of coordination clusters with an antiferromagnetic core of four magnetic ions. Two different compounds are analyzed, with Co and Mn ions in the core. While both molecules are antiferromagnetic, they display different sensitivities to external magnetic field, according to the different atomic magnetic moments and strength of the intra-molecular magnetic couplings. In particular, the dependence of the magnetization versus field of the two molecules switches with temperature: at low temperature the magnetization is smaller in {Mn4} than in Co4, while the opposite happens at high temperature. Through a detailed analysis of the electronic and magnetic properties of the two compounds we identify a stronger magnetic interaction between the magnetic ions in {Mn4} with respect to {Co4}. Moreover {Co4} displays not negligible spin-orbit related effects that could affect the spin lifetime in future antiferromagnetic spintronic applications. We highlight the necessity to account for these spin-orbit effects together with electronic correlation effects for a reliable description of these compounds.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optical signatures of defect centers in transition metal dichalcogenide monolayers

  • Melo, Pedro Miguel M. C. de
  • Zanolli, Zeila|||0000-0003-0860-600X
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
Even the best quality 2D materials have non-negligible concentrations of vacancies and impurities. It is critical to understand and quantify how defects change intrinsic properties, and use this knowledge to generate functionality. This challenge can be addressed by employing many-body perturbation theory to obtain the optical absorption spectra of defected transition metal dichalcogenides. Herein metal vacancies, which are largely unreported, show a larger set of polarized excitons than chalcogenide vacancies, introducing localized excitons in the sub-optical-gap region, whose wave functions and spectra make them good candidates as quantum emitters. Despite the strong interaction with substitutional defects, the spin texture and pristine exciton energies are preserved, enabling grafting and patterning in optical detectors, as the full optical-gap region remains available. A redistribution of excitonic weight between the A and B excitons is visible in both cases and may allow the quantification of the defect concentration. This work establishes excitonic signatures to characterize defects in 2D materials and highlights vacancies as qubit candidates for quantum computing.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Critical role of phosphorus in hollow structures cobalt-based phosphides as bifunctional catalysts for water splitting, High-performance bifunctional hollow structures cobalt-based phosphides catalysts for water splitting

  • Zhang, Wei
  • Han, Ning
  • Luo, Jiangshui
  • Han, Xu|||0000-0001-8319-8830
  • Feng, Shihui
  • Guo, Wei|||0000-0002-4322-3699
  • Xie, Sijie
  • Zhou, Zhenyu
  • Subramanian, Palaniappan|||0000-0003-1000-6994
  • Wan, Kai|||0000-0003-4689-310X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhang, Chi|||0000-0001-6009-5273
  • Liu, Shaomin
  • Xu, Maowen|||0000-0001-9320-5731
  • Zhang, Xuan
  • Fransaer, Jan|||0000-0002-0232-0687
Cobalt phosphides electrocatalysts have great potential for water splitting, but the unclear active sides hinder the further development of cobalt phosphides. Wherein, three different cobalt phosphides with the same hollow structure morphology (CoP-HS, CoP-HS, CoP-HS) based on the same sacrificial template of ZIF-67 are prepared. Surprisingly, these cobalt phosphides exhibit similar OER performances but quite different HER performances. The identical OER performance of these CoP-HS in alkaline solution is attributed to the similar surface reconstruction to CoOOH. CoP-HS exhibits the best catalytic activity for HER among these CoP-HS in both acidic and alkaline media, originating from the adjusted electronic density of phosphorus to affect absorption-desorption process on H. Moreover, the calculated ΔG based on P-sites of CoP-HS follows a quite similar trend with the normalized overpotential and Tafel slope, indicating the important role of P-sites for the HER process. Moreover, CoP-HS displays good performance (cell voltage of 1.67 V at a current density of 50 mA cm) and high stability in 1 M KOH. For the first time, this work detailly presents the critical role of phosphorus in cobalt-based phosphides for water splitting, which provides the guidance for future investigations on transition metal phosphides from material design to mechanism understanding.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Low-Cost, High-Yield Zinc Oxide-Based Nanostars for Alkaline Overall Water Splitting

  • Di Mari, Gisella Maria
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Salutari, Francesco|||0000-0002-5802-8941
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Bruno, Luca|||0000-0003-2710-1154
  • Mineo, Giacometta|||0000-0001-6713-8811
  • Bruno, Elena
  • Strano, Vincenzina|||0000-0003-2053-4141
  • Mirabella, Salvo|||0000-0002-9559-4862
The investigation of high-efficiency and sustainable electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline media is critical for renewable energy technologies. Here, we report a low-cost and high-yield method to obtain ZnOHF-ZnO-based 2D nanostars (NSs) by means of chemical bath deposition (CBD). The obtained NSs, cast onto graphene paper substrates, were used as active materials for the development of a full water splitting cell. For the HER, NSs were decorated with an ultralow amount of Pt nanoparticles (11.2 μg cm -2), demonstrating an overpotential of 181 mV at a current density of 10 mA cm -2. The intrinsic activity of Pt was optimized, thanks to the ZnO supporting nanostructures, as outlined by the mass activity of Pt (0.9 mA mg -1) and its turnover frequency (0.27 s -1 for a Pt loading of 11.2 μg cm -2). For the OER, bare NSs showed a remarkable result of 355 mV at 10 mA cm -2 in alkaline media. Pt-decorated and bare NSs were used as the cathode and anode, respectively, for alkaline electrochemical water splitting, assessing a stable overpotential of 1.7 V at a current density of 10 mA cm -2. The reported data pave the way toward large-scale production of low-cost electrocatalysts for green hydrogen production.