Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical solution synthesis and ferromagnetic resonance of epitaxial thin films of yttrium iron garnet

  • Lucas, Irene
  • Jiménez-Cavero, Pilar
  • Vila-Fungueiriño, José M.
  • Magén, César
  • Sangiao, S.
  • Teresa, José María de
  • Morellón, Luis
  • Rivadulla, Francisco
We report the fabrication of epitaxial Y3Fe5O12 (YIG) thin films on Gd3Ga5O12 (111) using a chemical solution method. Cubic YIG is a ferrimagnetic material at room temperature, with excellent magneto-optical properties, high electrical resistivity, and a very narrow ferromagnetic resonance, which makes it particularly suitable for applications in filters and resonators at microwave frequencies. But these properties depend on the precise stoichiometry and distribution of Fe3+ ions among the octahedral/tetrahedral sites of a complex structure, which hampered the production of high-quality YIG thin films by affordable chemical methods. Here we report the chemical solution synthesis of YIG thin films, with excellent chemical, crystalline, and magnetic homogeneity. The films show a very narrow ferromagnetic resonance (long spin relaxation time), comparable to that obtained from high-vacuum physical deposition methods. These results demonstrate that chemical methods can compete to develop nanometer-thick YIG films with the quality required for spintronic devices and other high-frequency applications., This work was supported by the Ministry of Science of Spain (Projects No. MAT2016-80762-R, MAT2017-82970-C2-R, and No. MAT2014-51982-C2), the Consellería de Cultura, Educación e Ordenación Universitaria, Xunta de Galicia (ED431F 2016/008, and Centro Singular de Investigación de Galicia Accreditation 2016–2019, ED431G/09), the European Regional Development Fund (ERDF), and the Aragón Regional Government through Projects E26. The microscopy works have been conducted in the Laboratorio de Microscopías Avanzadas (LMA) at Instituto de Nanociencia de Aragón (INA), Universidad de Zaragoza. The authors acknowledge the LMA-INA for offering access to their instruments and expertise. Pilar Jiménez-Cavero acknowledges Spanish MECD for support through FPU program (Reference No. FPU014/02546)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structurally oriented nano-sheets in Co thin films: Changing their anisotropic physical properties by thermally-induced relaxatio

  • Vergara, José
  • Favieres, Cristina
  • Magén, César
  • Teresa, José María de
  • Ibarra, M. Ricardo
  • Madurga, Vicente
We show how nanocrystalline Co films formed by separated oblique nano-sheets display anisotropy in their resistivity, magnetization process, surface nano-morphology and optical transmission. After performing a heat treatment at 270 °C, these anisotropies decrease. This loss has been monitored measuring the resistivity as a function of temperature. The resistivity measured parallel to the direction of the nano-sheets has been constant up to 270 °C, but it decreases when measured perpendicular to the nano-sheets. This suggests the existence of a structural relaxation, which produces the change of the Co nano-sheets during annealing. The changes in the nano-morphology and the local chemical composition of the films at the nanoscale after heating above 270 °C have been analysed by scanning transmission electron microscopy (STEM). Thus, an approach and coalescence of the nano-sheets have been directly visualized. The spectrum of activation energies of this structural relaxation has indicated that the coalescence of the nano-sheets has taken place between 1.2 and 1.7 eV. In addition, an increase in the size of the nano-crystals has occurred in the samples annealed at 400 °C. This study may be relevant for the application in devices working, for example, in the GHz range and to achieve the retention of the anisotropy of these films at higher temperatures., C.M., J.M.d.T. and M.R.I. acknowledge the financial support from the Spanish Ministerio de Economía y Competitividad in the project MAT2017-82970-C2-R. J.V., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Room-temperature AFM electric-field-induced topotactic transformation between perovskite and brownmillerite SrFeOx with sub-micrometer spatial resolution

  • Ferreiro-Vila, Elías
  • Blanco-Canosa, Santiago
  • Lucas, Irene
  • Vasili, Hari Babu
  • Magén, César
  • Ibarra, Alfonso
  • Rubio-Zuazo, J.
  • Castro, Germán R.
  • Morellón, Luis
  • Rivadulla, Francisco
Reversible structural transformations between perovskite (PV) ABO3−δ and brownmillerite (BM) ABO2.5 (A = Ca2+, Sr2+; B = Fe4+/3, Co4+/3+) oxides can be induced by topotactic oxygen exchange at moderate temperatures under reducing/oxidizing conditions. The combination of a large oxide-ion conduc-tivity and a small free energy difference between the 4+/3+ oxidation states of many 3d transition metal ions enables these topotactic transformations. Herein, it is demonstrated that the electric field produced by a voltage-biased atomic force microscopy tip can induce such transformation between PV SrFeO3−δ and BM SrFeO2.5 at room temperature and with sub-micrometer spatial resolution. Interestingly, the structural transformation is kept after the electric field is removed, allowing a nonvolatile control of the local chemical, electrical, optical, and magnetic properties. Thus, the results presented in this paper open the door for the fabrication of stable ionic-based devices through the electric field patterning of different crystallographic phases., This work has received financial support from Ministerio de Economía y Competitividad (Spain) under Project Nos. MAT2016-80762-R, MAT2017-82970-C2-R, and PGC2018-101334-A-C22, Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016-2019, ED431G/09), the European Union (European Regional Development Fund-ERDF), and the European Commission through the Horizon H2020 funding by H2020-MSCA-RISE-2016 under Project No. 734187-SPICOLOST. This project has received funding from the European’s Union Horizon 2020 research and innovation programme under Grant No. 823717-ESTEEM3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metallic diluted dimerization in VO2 tweeds

  • Sandiumenge, Felip
  • Rodríguez, Laura
  • Pruneda, Miguel
  • Magén, César
  • Santiso, José
  • Catalán, Gustau
The observation of electronic phase separation textures in vanadium dioxide, a prototypical electron‐correlated oxide, has recently added new perspectives on the long standing debate about its metal–insulator transition and its applications. Yet, the lack of atomically resolved information on phases accompanying such complex patterns still hinders a comprehensive understanding of the transition and its implementation in practical devices. In this work, atomic resolution imaging and spectroscopy unveils the existence of ferroelastic tweed structures on ≈5 nm length scales, well below the resolution limit of currently used spectroscopic imaging techniques. Moreover, density functional theory calculations show that this pretransitional fine‐scale tweed, which on average looks and behaves like the standard metallic rutile phase, is in fact weaved by semi‐dimerized chains of vanadium in a new monoclinic phase that represents a structural bridge to the monoclinic insulating ground state. These observations provide a multiscale perspective for the interpretation of existing data, whereby phase coexistence and structural intermixing can occur all the way down to the atomic scale., The authors thank Prof. Enric Canadell for enlightening discussions. The authors also thank Prof. Etienne Snoeck and Dr. Christophe Gatel for obtaining HRTEM images of the 80 nm‐thick film at CEMES (Toulouse), and Dr. Belén Ballesteros for assistance during preliminary TEM observations. F.S. acknowledges the Spanish Ministry of Industry, Economy and Competitiveness (MINECO) for financial support through the “Severo Ochoa” programme for Centers of Excellence in R&D (SEV‐2015‐0496) and Project No. RTI2018‐098537‐B‐C21. G.C., J.S., and L.R. acknowledge financial support from MINECO (Grant No. MAT2016‐77100‐C2‐1‐P) and the Catalan Government (Generalitat de Catalunya, Grant No. 2017 SGR 579). M.P. acknowledges financial support from Spanish MICIU, AEI and EU FEDER (Grant No. PGC2018‐096955‐B‐C43) and Generalitat de Catalunya (Grant No. 2017SGR1506). Research at ICN2 was also supported by the CERCA programme (Generalitat de Catalunya) and by the “Severo Ochoa” programme for Centers of Excellence in R&D of MINECO (Grant No. SEV‐2017‐0706). C.M. acknowledges funding from MINECO under Project No. MAT2017‐82970‐C2‐R and from the European's Union Horizon 2020 research and innovation programme under Grant No. 823717‐ESTEEM3., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structurally oriented nano-sheets in co thin films: Changing their anisotropic physical properties by thermally-induced relaxation

  • Vergara, J.
  • Favieres, C.
  • Magén, C.
  • de Teresa, J.M.
  • Ibarra, M.R.
  • Madurga, V.
We show how nanocrystalline Co films formed by separated oblique nano-sheets display anisotropy in their resistivity, magnetization process, surface nano-morphology and optical transmission. After performing a heat treatment at 270 °C, these anisotropies decrease. This loss has been monitored measuring the resistivity as a function of temperature. The resistivity measured parallel to the direction of the nano-sheets has been constant up to 270 °C, but it decreases when measured perpendicular to the nano-sheets. This suggests the existence of a structural relaxation, which produces the change of the Co nano-sheets during annealing. The changes in the nano-morphology and the local chemical composition of the films at the nanoscale after heating above 270 °C have been analysed by scanning transmission electron microscopy (STEM). Thus, an approach and coalescence of the nano-sheets have been directly visualized. The spectrum of activation energies of this structural relaxation has indicated that the coalescence of the nano-sheets has taken place between 1.2 and 1.7 eV. In addition, an increase in the size of the nano-crystals has occurred in the samples annealed at 400 °C. This study may be relevant for the application in devices working, for example, in the GHz range and to achieve the retention of the anisotropy of these films at higher temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemical solution synthesis and ferromagnetic resonance of epitaxial thin films of yttrium iron garnet

  • Lucas, I.
  • Jimenez-Cavero, P.
  • Vila-Fungueirino, J.M.
  • Magen, C.
  • Sangiao, S.
  • de Teresa, J.M.
  • Morellon, L.
  • Rivadulla, F.
We report the fabrication of epitaxial Y3Fe5O12 (YIG) thin films on Gd3Ga5O12 (111) using a chemical solution method. Cubic YIG is a ferrimagnetic material at room temperature, with excellent magneto-optical properties, high electrical resistivity, and a very narrow ferromagnetic resonance, which makes it particularly suitable for applications in filters and resonators at microwave frequencies. But these properties depend on the precise stoichiometry and distribution of Fe3+ ions among the octahedral/tetrahedral sites of a complex structure, which hampered the production of high-quality YIG thin films by affordable chemical methods. Here we report the chemical solution synthesis of YIG thin films, with excellent chemical, crystalline, and magnetic homogeneity. The films show a very narrow ferromagnetic resonance (long spin relaxation time), comparable to that obtained from high-vacuum physical deposition methods. These results demonstrate that chemical methods can compete to develop nanometer-thick YIG films with the quality required for spintronic devices and other high-frequency applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Apparent auxetic to non-auxetic crossover driven by Co 2+ redistribution in CoFe 2 O 4 thin films

  • Ferreiro-Vila, E.
  • Iglesias, L.
  • Lucas Del Pozo, I.
  • Varela-Dominguez, N.
  • Bui, C.T.
  • Rivas-Murias, B.
  • Vila-Fungueiriño, J.M.
  • Jimenez-Cavero, P.
  • Magen, C.
  • Morellon, L.
  • Pardo, V.
  • Rivadulla, F.
Oxide spinels of general formula AB2O4 (A = Mg2+, Fe2+; B = Al3+, Cr3+, etc.) constitute one of the most abundant crystalline structures in mineralogy. In this structure, cations distribute among octahedral and tetrahedral sites, according to their size and the crystal-field stabilization energy. The cationic arrangement determines the mechanical, magnetic, and transport properties of the spinel and can be influenced by external parameters like temperature, pressure, or epitaxial stress in the case of thin films. Here, we report a progressive change in the sign of the Poisson ratio, ¿, in thin films of CoFe2O4, defining a smooth crossover from auxetic (¿ < 0) to non-auxetic (¿ > 0) behavior in response to epitaxial stress and temperature. Microstructural and magnetization studies, as well as ab initio calculations, demonstrate that such unusual elastic response is actually due to a progressive redistribution of Co2+ among the octahedral and tetrahedral sites of the spinel structure. The results presented in this work clarify a long standing controversy about the magnetic and elastic properties of Co-ferrites and are of general applicability for understanding the stress-relaxation mechanism in complex crystalline structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

3D superconducting hollow nanowires with tailored diameters grown by focused He+ beam direct writing

  • Cordoba, R.
  • Ibarra, A.
  • Mailly, D.
  • Guillamon, I.
  • Suderow, H.
  • De Teresa, J.M.
Currently, the patterning of innovative three-dimensional (3D) nano-objects is required for the development of future advanced electronic components. Helium ion microscopy in combination with a precursor gas can be used for direct writing of three-dimensional nanostructures with a precise control of their geometry, and a significantly higher aspect ratio than other additive manufacturing technologies. We report here on the deposition of 3D hollow tungsten carbide nanowires with tailored diameters by tuning two key growth parameters, namely current and dose of the ion beam. Our results show the control of geometry in 3D hollow nanowires, with outer and inner diameters ranging from 36 to 142 nm and from 5 to 28 nm, respectively; and lengths from 0.5 to 8.9 mu m. Transmission electron microscopy experiments indicate that the nanowires have a microstructure of large grains with a crystalline structure compatible with the face-centered cubic WC1-x phase. In addition, 3D electron tomographic reconstructions show that the hollow center of the nanowires is present along the whole nanowire length. Moreover, these nanowires become superconducting at 6.8 K and show high values of critical magnetic field and critical current density. Consequently, these 3D nano-objects could be implemented as components in the next generation of electronics, such as nano-antennas and sensors, based on 3D superconducting architectures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quantification of the interfacial and bulk contributions to the longitudinal spin Seebeck effect

  • Jiménez-Cavero, P.
  • Lucas, I.
  • Bugallo, D.
  • López-Bueno, C.
  • Ramos, R.
  • Algarabel, P.A.
  • Ibarra, M.R.
  • Rivadulla, F.
  • Morellón, L.
We report the disentanglement of bulk and interfacial contributions to the thermally excited magnon spin current in the spin Seebeck effect under static heating. For this purpose, we have studied the dependence of the inverse spin Hall voltage and the thermal conductivity on the magnetic layer thickness. Knowledge of these quantities allows us to take into account the influence of both sources of thermal spin current in the analysis of the voltage dependence. The magnetic layer thickness modulates the relative magnitude of the involved thermal drops for a fixed total thermal difference throughout the sample. In the end, we attain the separate contributions of both sources of thermal spin current - bulk and interfacial - and obtain the value of the thermal magnon accumulation length scale in maghemite, which we find to be 29(1) nm. According to our results, bulk magnon accumulation dominates the spin Seebeck effect in our studied range of thicknesses, but the interfacial component is by no means negligible.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Vanadium trapped by oblique nano-sheets to preserve the anisotropy in Co–V thin films at high temperature

  • Favieres, C.
  • Vergara, J.
  • Magén, C.
  • Ibarra, M.R.
  • Madurga, V.
In this study, oriented nano-sheets generated during the growth of cobalt-rich Co–V and Co–Zn thin films induced a large anisotropy in the magnetic and transport properties. The regular nano-sheets were tilted 52–54 deg. with respect to the substrate plane, ˜ 3.0–4.0 nm thick, ˜ 30–100 nm wide, and ˜ 200–300 nm long, with an inter-sheet distance of ˜ 0.9–1.2 nm. In spite of the different microstructures of the two kinds of samples where the Co–V films were amorphous, whereas the Co–Zn films showed a growth of Zn nanocrystals, the oblique nano-sheet morphology conferred noticeable shape anisotropy to both specimens. This anisotropy resulted in an in-plane uniaxial magnetic anisotropy. The changes in the nano-morphology caused by thermal treatments, and hence in their anisotropic properties, were studied. While the Co–V samples retained or increased their magnetic and transport anisotropies, this anisotropic behavior vanished for the annealed Co–Zn films. High resolution transmission electron microscopy, HRTEM, including chemical analysis at the nano-scale, and the dependence of the anisotropic resistance on temperature allowed to establish the nature and the activation energy spectra of the atomic relaxation processes during heating. These processes displayed a single peak at 1.63 eV for the Co–V and two peaks at 1.67 and 2.0 eV for the Co–Zn. These spectra and their singularities were associated to the changes induced in the nano-morphology of the films by thermal treatments. The Co–V films retained their nano-sheet morphology almost up to 500 ºC; the Co–Zn films lost their nano-sheets at 290 ºC. The thermal stability exhibited by the Co–V films makes them useful for applications in ultra high frequency, optical, magnetostrictive and magneto-electric devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dimensionality-driven metal-insulator transition in spin-orbit-coupled IrO2

  • Arias Egido E.
  • Laguna Marco M.A.
  • Piquer Oliet C.
  • Jiménez Cavero P.
  • Lucas del Pozo I.
  • Morellón Alquézar L.
  • Gallego F.
  • Rivera-Calzada A.
  • Cabero-Piris M.
  • Santamaria J.
  • Fabbris G.
  • Haskel D.
  • Boada R.
  • Díaz-Moreno S.
A metal-insulator transition is observed in spin-orbit-coupled IrO2 thin films upon reduction of the film thickness. In the epitaxially grown samples, the critical thickness (t ~ 1.5-2.2 nm) is found to depend on growth orientation (001), (100) or (110). Interestingly from the applied point of view, the insulating behavior is found even in polycrystalline ultrathin films. By analyzing the experimental electrical response with various theoretical models, we find good fits to the Efros-Shklovskii-VRH and the Arrhenius-type behaviors, which suggests an important role of electron correlations in determining the electrical properties of IrO2. Our magnetic measurements also point to a significant role of magnetic order. Altogether, our results would point to a mixed Slater- and Mott-type of insulator. © 2021 The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Engineering the spin conversion in graphene monolayer epitaxial structures

  • Anadón, A.
  • Gudín, A.
  • Guerrero, R.
  • Arnay, I.
  • Guedeja-Marron, A.
  • Jiménez-Cavero, P.
  • Díez Toledano, J.M.
  • Ajejas, F.
  • Varela, M.
  • Petit-Watelot, S.
  • Lucas, I.
  • Morellón, L.
  • Algarabel, P.A.
  • Ibarra, M.R.
  • Miranda, R.
  • Camarero, J.
  • Rojas-Sánchez, J.C.
  • Perna, P.
Spin Hall and Rashba-Edelstein effects, which are spin-to-charge conversion phenomena due to spin-orbit coupling (SOC), are attracting increasing interest as pathways to manage rapidly and at low consumption cost the storage and processing of a large amount of data in spintronic devices as well as more efficient energy harvesting by spin-caloritronics devices. Materials with large SOC, such as heavy metals (HMs), are traditionally employed to get large spin-to-charge conversion. More recently, the use of graphene (gr) in proximity with large SOC layers has been proposed as an efficient and tunable spin transport channel. Here, we explore the role of a graphene monolayer between Co and a HM and its interfacial spin transport properties by means of thermo-spin measurements. The gr/HM (Pt and Ta) stacks have been prepared on epitaxial Ir(111)/Co(111) structures grown on sapphire crystals, in which the spin detector (i.e., top HM) and the spin injector (i.e., Co) are all grown in situ under controlled conditions and present clean and sharp interfaces. We find that a gr monolayer retains the spin current injected into the HM from the bottom Co layer. This has been observed by detecting a net reduction in the sum of the spin Seebeck and interfacial contributions due to the presence of gr and independent from the spin Hall angle sign of the HM used.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metallic diluted dimerization in VO2 tweeds

  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Pruneda, Miguel|||0000-0002-3621-6095
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Santiso, José|||0000-0003-4274-2101
  • Catalan, Gustau|||0000-0003-0214-4828
The observation of electronic phase separation textures in vanadium dioxide, a prototypical electron-correlated oxide, has recently added new perspectives on the long standing debate about its metal-insulator transition and its applications. Yet, the lack of atomically resolved information on phases accompanying such complex patterns still hinders a comprehensive understanding of the transition and its implementation in practical devices. In this work, atomic resolution imaging and spectroscopy unveils the existence of ferroelastic tweed structures on ≈5 nm length scales, well below the resolution limit of currently used spectroscopic imaging techniques. Moreover, density functional theory calculations show that this pretransitional fine-scale tweed, which on average looks and behaves like the standard metallic rutile phase, is in fact weaved by semi-dimerized chains of vanadium in a new monoclinic phase that represents a structural bridge to the monoclinic insulating ground state. These observations provide a multiscale perspective for the interpretation of existing data, whereby phase coexistence and structural intermixing can occur all the way down to the atomic scale.