Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 78
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Origin of inverse Rashba-Edelstein effect detected at the Cu/Bi interface using lateral spin valves

  • Isasa, Miren
  • Martínez-Velarte, María C.
  • Villamor, Estitxu
  • Magén, César
  • Morellón, Luis
  • Teresa, José María de
  • Ibarra, M. Ricardo
  • Vignale, G.
  • Chulkov, Eugene V.
  • Krasovskii, E. E.
  • Hueso, Luis E.
  • Casanova, Félix
Under the terms of the Creative Commons Attribution License 3.0 (CC-BY)., The spin transport and spin-to-charge current conversion properties of bismuth are investigated using permalloy/copper/bismuth (Py/Cu/Bi) lateral spin valve structures. The spin current is strongly absorbed at the surface of Bi, leading to ultrashort spin-diffusion lengths. A spin-to-charge current conversion is measured, which is attributed to the inverse Rashba-Edelstein effect at the Cu/Bi interface. The spin-current-induced charge current is found to change direction with increasing temperature. A theoretical analysis relates this behavior to the complex spin structure and dispersion of the surface states at the Fermi energy. The understanding of this phenomenon opens novel possibilities to exploit spin-orbit coupling to create, manipulate, and detect spin currents in two-dimensional systems., This work was supported by the European Commission under the Marie Curie Actions (Grant No. 256470-ITAMOSCINOM), the SUDOE (Grant No. TRAIN2-SOE2/P1/E-280), and the European Research Council (Grant No. 257654-SPINTROS), by the Spanish MINECO under Projects No. MAT2012-37638, No. MAT2011-13099-E, No. MAT2011-27553-C02, No. MAT2014-51982-C2-1-R, No. MAT2015-69725-REDT, and No. FIS2013-48286-C2-1-P, including FEDER funds, by the Basque Government under Project No. PI2011-1, and by the Aragon Regional Government under Project No. E26. M.I. and E.V. thank the Basque Government for Ph.D. fellowships (Grants No. BFI-2011-106 and No. BFI-2010-163)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D magnetic induction maps of nanoscale materials revealed by electron holographic tomography

  • Wolf, Daniel
  • Rodríguez, Luis A.
  • Magén, César
  • Gatel, Christophe
  • Fernández-Pacheco, Amalio
  • Teresa, José María de
  • Snoeck, Etienne
This is an open access article published under a Creative Commons Attribution (CC-BY) License.-- et al., The investigation of three-dimensional (3D) ferromagnetic nanoscale materials constitutes one of the key research areas of the current magnetism roadmap and carries great potential to impact areas such as data storage, sensing, and biomagnetism. The properties of such nanostructures are closely connected with their 3D magnetic nanostructure, making their determination highly valuable. Up to now, quantitative 3D maps providing both the internal magnetic and electric configuration of the same specimen with high spatial resolution are missing. Here, we demonstrate the quantitative 3D reconstruction of the dominant axial component of the magnetic induction and electrostatic potential within a cobalt nanowire (NW) of 100 nm in diameter with spatial resolution below 10 nm by applying electron holographic tomography. The tomogram was obtained using a dedicated TEM sample holder for acquisition, in combination with advanced alignment and tomographic reconstruction routines. The powerful approach presented here is widely applicable to a broad range of 3D magnetic nanostructures and may trigger the progress of novel spintronic nonplanar nanodevices., This work was supported by the European Union under the Seventh Framework Program under a contract for an Integrated Infrastructure Initiative Reference 312483-ESTEEM2. S.B. and A.B. gratefully acknowledge funding by ERC Starting grants number 335078 COLOURATOMS and number 278510 VORTEX. A.F.-P. acknowledges an EPSRC Early Career fellowship and support from the Winton Foundation. E.S., C.G., and L.A.R. acknowledge the French ANR program for support though the project EMMA. J.M.D.T. and C. M. acknowledge the Spanish MINECO projects MAT2014-51982- C2-1-R and MAT2014-51982-C2-2-R, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Focused electron and ion beam induced deposition on flexible and transparent polycarbonate substrates

  • Peinado, Patricia
  • Sangiao, S.
  • Teresa, José María de
ACS AuthorChoice - This is an open access article published under an ACS AuthorChoice License., The successful application of focused electron (and ion) beam induced deposition techniques for the growth of nanowires on flexible and transparent polycarbonate films is reported here. After minimization of charging effects in the substrate, sub-100 nm-wide Pt, W, and Co nanowires have been grown and their electrical conduction is similar compared to the use of standard Si-based substrates. Experiments where the substrate is bent in a controlled way indicate that the electrical conduction is stable up to high bending angles, >50°, for low-resistivity Pt nanowires grown by the ion beam. On the other hand, the resistance of Pt nanowires grown by the electron beam changes significantly and reversibly with the bending angle. Aided by the substrate transparency, a diffraction grating in transmission mode has been built based on the growth of an array of Pt nanowires that shows sharp diffraction spots. The set of results supports the large potential of focused beam deposition as a high-resolution nanolithography technique on transparent and flexible substrates. The most promising applications are expected in flexible nano-optics and nanoplasmonics, flexible electronics, and nanosensing., This work was supported by Spanish Ministry of Economy and Competitivity through projects No. MAT2011-27553-C02 and MAT2014-51982-C2-1-R including FEDER funds and by the Aragon Regional Government., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epitaxial stabilization of the perovskite phase in (Sr1-xBax)MnO3 thin films

  • Langenberg, Eric
  • Morellón, Luis
  • Ibarra, M. Ricardo
  • Herrero Martín, Javier
  • Blasco, Javier
  • Magén, César
  • Algarabel, Pedro A.
  • Pardo, José A.
A novel mechanism of ferroelectricity driven by off-centering magnetic Mn4+ ions was proposed in (Sr1–xBax)MnO3, in its ideal perovskite phase, which yields enormous expectations in the search for strong magnetoelectric materials. Still, the desired perovskite phase has never been stabilized in thin films due to its extremely metastable character. Here, we report on a thorough study of the perovskite phase stabilization of (Sr1–xBax)MnO3 thin films, 0.2 ≤ x ≤ 0.5, grown by pulsed laser deposition onto (001)-oriented perovskite substrates. X-ray diffraction measurements and scanning transmission electron microscopy reveal that, under appropriate deposition conditions, the perovskite phase is fully stabilized over the nonferroelectric hexagonal phase, despite the latter being increasingly favored on increasing Ba-content. Moreover, we have managed to grow epitaxial coherent cube-on-cube (Sr1–xBax)MnO3 films upon strains ranging from 0% to 4%. Our results become a milestone in further studying perovskite (Sr1–xBax)MnO3 thin films and pave the way for tailoring ferroic and magnetoelectric properties either by strain engineering or Ba-doping., This work was supported by the Spanish Ministry of Economy and Competitiveness through Projects MAT2012-38213-C02-01 and MAT2014-51982-C2 including FEDER funding, by the Aragon Regional Government through Projects E26 and CTPP4/11 and by the European Union under the Seventh Framework Programme under a contract for an Integrated Infrastructure Initiative Reference 312483-ESTEEM2., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the shape and surface oxidation in the magnetization reversal of thin iron nanowires grown by focused electron beam induced deposition

  • Rodríguez, Luis A.
  • Deen, Lorenz
  • Córdoba, Rosa
  • Magén, César
  • Snoeck, Etienne
  • Koopmans, Bert
  • Teresa, José María de
Iron nanostructures grown by focused electron beam induced deposition (FEBID) are promising for applications in magnetic sensing, storage and logic. Such applications require a precise design and determination of the coercive field (H C), which depends on the shape of the nanostructure. In the present work, we have used the Fe2(CO)9 precursor to grow iron nanowires by FEBID in the thickness range from 10 to 45 nm and width range from 50 to 500 nm. These nanowires exhibit an Fe content between 80 and 85%, thus giving a high ferromagnetic signal. Magneto-optical Kerr characterization indicates that H C decreases for increasing thickness and width, providing a route to control the magnetization reversal field through the modification of the nanowire dimensions. Transmission electron microscopy experiments indicate that these wires have a bell-type shape with a surface oxide layer of about 5 nm. Such features are decisive in the actual value of H C as micromagnetic simulations demonstrate. These results will help to make appropriate designs of magnetic nanowires grown by FEBID., This work was supported by Spanish Ministry of Economy and Competitivity through project No. MAT2011-27553-C02, MAT2011-28532-C03-02 and MAT2014-51982-C2-1-R, including FEDER funds and by the Aragon Regional Government., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nature of antiferromagnetic order in epitaxially strained multiferroic SrMnO3 thin films

  • Maurel, Laura
  • Marcano, N.
  • Langenberg, Eric
  • Blasco, Javier
  • Magén, César
  • Morellón, Luis
  • Ibarra, M. Ricardo
  • Pardo, José A.
  • Algarabel, Pedro A.
et al., Epitaxial films of SrMnO3 and bilayers of SrMnO3/La0.67Sr0.33MnO3 have been deposited by pulsed laser deposition on different substrates, namely, LaAlO3 (001), (LaAlO3)0.3(Sr2AlTaO6)0.7 (001), and SrTiO3 (001), allowing us to perform an exhaustive study of the dependence of antiferromagnetic order and exchange bias field on epitaxial strain. The Néel temperatures (TN) of the SrMnO3 films have been determined by low-energy muon spin spectroscopy. In agreement with theoretical predictions, TN is reduced as the epitaxial strain increases. From the comparison with first-principles calculations, a crossover from G-type to C-type antiferromagnetic orders is proposed at a critical tensile strain of around 1.6±0.1%. The exchange bias (coercive) field, obtained for the bilayers, increases (decreases) by increasing the epitaxial strain in the SrMnO3 layer, following an exponential dependence with temperature. Our experimental results can be explained by the existence of a spin-glass (SG) state at the interface between the SrMnO3 and La0.67Sr0.33MnO3 films. This SG state is due to the competition between the different exchange interactions present in the bilayer and favored by increasing the strain in the SrMnO3 layer., This work was supported by the Spanish Ministerio de Economía y Competitividad through Project Nos. MAT2011-28532-C03-02, MAT2011-27553-C02, MAT2012- 38213-C02-01, and MAT2014-51982-C2 including FEDER funding, by the Aragon Regional Government through projects E26 and CTPP4/11 and by the European Union under the Seventh Framework Programme under a contract for an Integrated Infrastructure Initiative Reference 312483-ESTEEM2. N. Marcano acknowledges the support of the Centro Universitario de la Defensa en Zaragoza (through Project 2013-03)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-induced coupling of electrical polarization and structural defects in SrMnO3 films

  • Maurel, Laura
  • Magén, César
  • Langenberg, Eric
  • Blasco, Javier
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Fiebig, Manfred
Letter.-- et al., Local perturbations in complex oxides, such as domain walls, strain and defects, are of interest because they can modify the conduction or the dielectric and magnetic response, and can even promote phase transitions. Here, we show that the interaction between different types of local perturbations in oxide thin films is an additional source of functionality. Taking SrMnO 3 as a model system, we use nonlinear optics to verify the theoretical prediction that strain induces a polar phase, and apply density functional theory to show that strain simultaneously increases the concentration of oxygen vacancies. These vacancies couple to the polar domain walls, where they establish an electrostatic barrier to electron migration. The result is a state with locally structured room-temperature conductivity consisting of conducting nanosized polar domains encased by insulating domain boundaries, which we resolve using scanning probe microscopy. Our 'nanocapacitor' domains can be individually charged, suggesting stable capacitance nanobits with a potential for information storage technology., M.F., D.M. and M.L. acknowledge funding from grant ‘ETH-06 12-2’ and from SNF proposal no. 200021-149192. The authors acknowledge funding through the SNF R’equip Program (no. 206021-144988). Financial support from Spanish Ministerio de Economía y Competitividad through projects MAT2011-27553-C02, MAT2012-38213-C02-01, MAT2014-51982-C2 and from Regional Gobierno de Aragón through project E26 is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasmonic control of extraordinary optical transmission in the infrared regime

  • Sangiao, S.
  • Freire Fernández, Francisco
  • León-Pérez, F. de
  • Rodrigo, Sergio G.
  • Teresa, José María de
We demonstrate that the spectral location of extraordinary optical transmission (EOT) resonances in metallic arrays of rectangular holes can be plasmonically tuned in the near and mid-infrared ranges. The experiments have been performed on patterned gold films. We focus on a subset of localized resonances occurring close to the cut-off wavelength of the holes, λc. Metals are usually regarded as perfect electric conductors in the infrared regime, with an EOT cut-off resonance found around λc = 2 L for rectangular holes (L being the long edge). For real metals, the penetration of the electromagnetic fields is simply seen as effectively enlarging L. However, by changing the hole short edge, we have found that λc varies due to the excitation of gap surface plasmon polaritons. Finite-element calculations confirm that in these high aspect ratio rectangles with short edges two important aspects have to be taken into account in order to explain the experiments: the finite conductivity of the metal and the excitation of gap-surface plasmons inside the nanoholes., This work was supported by Spanish Ministry of Economy and Competitivity through project No. MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R and MAT2014-53432-C5-1-R including FEDER funds and by the Aragon Regional Government., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Review of magnetic nanostructures grown by focused electron beam induced deposition (FEBID)

  • Teresa, José María de
  • Fernández-Pacheco, Amalio
  • Córdoba, Rosa
  • Serrano-Ramón, Luis
  • Sangiao, S.
  • Ibarra, M. Ricardo
We review the current status of the use of focused electron beam induced deposition (FEBID) for the growth of magnetic nanostructures. This technique relies on the local dissociation of a precursor gas by means of an electron beam. The most promising results have been obtained using the Co(CO) precursor, where the Co content in the grown nanodeposited material can be tailored up to more than 95 at.%. Functional behaviour of these Co nanodeposits has been observed in applications such as arrays of magnetic dots for information storage and catalytic growth, magnetic tips for scanning probe microscopes, nano-Hall sensors for bead detection, nano-actuated magnetomechanical systems and nanowires for domain-wall manipulation. The review also covers interesting results observed in Fe-based and alloyed nanodeposits. Advantages and disadvantages of FEBID for the growth of magnetic nanostructures are discussed in the article as well as possible future directions in this field., Financial support by several projects is acknowledged: MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R and MAT2015-69725-REDT from MINECO (including FEDER funding), CELINA COST Action CM1301, Aragón Regional Government through project E26, FP7 Marie Curie Fellowship 3DMAGNANOW, EPSRC Early Career Fellowship EP/M008517/1 and Winton Fellowship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thickness-modulated tungsten–carbon superconducting nanostructures grown by focused ion beam induced deposition for vortex pinning up to high magnetic fields

  • García-Serrano, Ismael
  • Sesé Monclús, Javier
  • Guillamón, Isabel
  • Suderow, Hermann
  • Vieira, Sebastián
  • Ibarra, M. Ricardo
  • Teresa, José María de
We report efficient vortex pinning in thickness-modulated tungsten-carbon-based (W-C) nanostructures grown by focused ion beam induced deposition (FIBID). By using FIBID, W-C superconducting films have been created with thickness modulation properties exhibiting periodicity from 60 to 140 nm, leading to a strong pinning potential for the vortex lattice. This produces local minima in the resistivity up to high magnetic fields (2.2 T) in a broad temperature range due to commensurability effects between the pinning potential and the vortex lattice. The results show that the combination of single-step FIBID fabrication of superconducting nanostructures with built-in artificial pinning landscapes and the small intrinsic random pinning potential of this material produces strong periodic pinning potentials, maximizing the opportunities for the investigation of fundamental aspects in vortex science under changing external stimuli (e.g., temperature, magnetic field, electrical current)., This work was supported by Spanish Ministry of Economy and Competitivity through projects No. MAT2014-51982-C2-1-R and MAT2014-51982-C2-2-R (including FEDER funds), FIS2014-54498-R, MDM-2014-0377, by the Aragon Regional Government, including European Social Funds, by the Comunidad de Madrid through program Nanofrontmag-CM (S2013/MIT-2850) and by EU (Cost MP-1201 and FP7-PEOPLE-2013-CIG 618321). I. G. Serrano acknowledges Abengoa Research Company for providing a thesis fellowship. I. G. acknowledges the European Research Council (ERC-2015-STG-679080), FBBVA and Axa Research Funds., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Three-dimensional core-shell ferromagnetic nanowires grown by focused electron beam induced deposition

  • Pablo-Navarro, Javier
  • Magén, César
  • Teresa, José María de
Functional nanostructured materials often rely on the combination of more than one material to confer the desired functionality or an enhanced performance of the device. Here we report the procedure to create nanoscale heterostructured materials in the form of core-shell nanowires by focused electron beam induced deposition (FEBID) technologies. In our case, three-dimensional (3D) nanowires (<100 nm in diameter) with metallic ferromagnetic cores of Co- and Fe-FEBID have been grown and coated with a protective Pt-FEBID shell (ranging 10-20 nm in thickness) aimed to minimize the degradation of magnetic properties caused by the surface oxidation of the core to a non-ferromagnetic material. The structure, chemistry and magnetism of nanowire cores of Co and Fe have been characterized in Pt-coated and uncoated nanostructures to demonstrate that the morphology of the shell is conserved during Pt coating, the surface oxidation is suppressed or confined to the Pt layer, and the average magnetization of the core is strengthened up to 30%. The proposed approach paves the way to the fabrication of 3D FEBID nanostructures based on the smart alternate deposition of two or more materials combining different physical properties or added functionalities., Financial support from Spanish Ministerio de Economía y Competitividad through the project MAT2014-51982-C2 and from regional Gobierno de Aragón through project E26 with European Social Fund funding is acknowledged. J P-N grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretaría de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness (MINECO) with the participation of the European Social Fund., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Contact-free mapping of electronic transport phenomena of polar domains in SrMnO3 films

  • Schaab, J.
  • Maurel, Laura
  • Langenberg, Eric
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Meier, D.
Under the terms of the Creative Commons Attribution license.-- et al., High-resolution mapping of electronic transport phenomena plays an increasingly important role for the characterization of ferroic domains and their functionality. At present, spatially resolved electronic transport data are commonly gained from local two-point measurements, collected in line-by-line scans with a conducting nanosized probe. Here, we introduce an innovative experimental approach based on low-energy electron microscopy. As a model case, we study polar domains of varying conductance in strained SrMnO3. By a direct comparison with conductive atomic force and electrostatic force microscopy, we reveal that the applied low-energy electron-microscopy experiment can be considered as an inverse I(V) measurement, providing access to the local electronic conductance with nanoscale resolution and short data-acquisition times in the order of 10-102 ms. Low-energy electrons thus hold yet unexplored application opportunities as a minimal-invasive probe for local electronic transport phenomena, opening a promising route towards spatially resolved, high-throughput sampling at the nanoscale., We thank HZB for the allocation of synchrotron beam time and we thankfully acknowledge financial support by HZB. Research at the ETH was financed in part by the SNF (Proposal No. 200021_149192). L. M., E. L., P. A. A., and J. A. P. acknowledge financial support from Ministerio de Economía y Competitividad under Project No. MAT2014-51982-C2 and Gobierno de Aragón under Project No. E26., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characteristic length scale of the magnon accumulation in Fe3O4/Pt bilayer structures by incoherent thermal excitation

  • Anadón, Arturo
  • Ramos, R.
  • Lucas, Irene
  • Algarabel, Pedro A.
  • Morellón, Luis
  • Ibarra, M. Ricardo
  • Aguirre, Myriam H.
The dependence of Spin Seebeck effect (SSE) with the thickness of the magnetic materials is studied by means of incoherent thermal excitation. The SSE voltage signal in Fe3O4/Pt bilayer structure increases with the magnetic material thickness up to 100 nm, approximately, showing signs of saturation for larger thickness. This dependence is well described in terms of a spin current pumped in the platinum film by the magnon accumulation in the magnetic material. The spin current is generated by a gradient of temperature in the system and detected by the Pt top contact by means of inverse spin Hall effect. Calculations in the frame of the linear response theory adjust with a high degree of accuracy the experimental data, giving a thermal length scale of the magnon accumulation (Λ) of 17 ± 3 nm at 300 K and Λ = 40 ± 10 nm at 70 K., This work was supported by the Spanish Ministry of Science (through Project No. MAT2014-51982-C2-R, including European social fund), the Aragon Regional government (Project No. E26), and Thermo-Spintronic Marie Curie CIG Project (Grant Agreement No. 304043)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

All-carbon electrode molecular electronic devices based on Langmuir–Blodgett monolayers

  • Sangiao, S.
  • Martín, Santiago
  • González-Orive, Alejandro
  • Magén, César
  • Low, Paul J.
  • Teresa, José María de
  • Cea, Pilar
Nascent molecular electronic devices, based on monolayer Langmuir–Blodgett films sandwiched between two carbonaceous electrodes, have been prepared. Tightly packed monolayers of 4-((4-((4-ethynylphenyl)ethynyl)phenyl)ethynyl)benzoic acid are deposited onto a highly oriented pyrolytic graphite electrode. An amorphous carbon top contact electrode is formed on top of the monolayer from a naphthalene precursor using the focused electron beam induced deposition technique. This allows the deposition of a carbon top-contact electrode with well-defined shape, thickness, and precise positioning on the film with nm resolution. These results represent a substantial step toward the realization of integrated molecular electronic devices based on monolayers and carbon electrodes., This work was supported by the Ministerio de Ciencia e Innovación from Spain in the framework of grants CTQ2013-50187-EXP, MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R, MAT2015-69725-REDT from MINECO (including FEDER funding) and CELINA COST Action CM1301. S.M and P.C. also acknowledge MINECO and FEDER funding for the MAT2016-78257-R grant. Financial support from DGA/Fondos Feder (Construyendo Europa desde Aragón) is also acknowledged by research group Platon (E-54) and Magna (E-26). P.J.L. holds an ARC Future Fellowship (Grant No. FT120100073) and gratefully acknowledges funding for this work from the ARC (Grant No. DP140100855)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature dependence of the spin Seebeck effect in [Fe3O4/Pt]n multilayers

  • Ramos, R.
  • Kikkawa, T.
  • Anadón, Arturo
  • Lucas, Irene
  • Uchida, K.
  • Algarabel, Pedro A.
  • Morellón, Luis
  • Aguirre, Myriam H.
  • Saitoh, E.
  • Ibarra, M. Ricardo
We report temperature dependent measurements of the spin Seebeck effect (SSE) in multilayers formed by repeated growth of a FeO/Pt bilayer junction. The magnitude of the observed enhancement of the SSE, relative to the SSE in the single bilayer, shows a monotonic increase with decreasing the temperature. This result can be understood by an increase of the characteristic length for spin current transport in the system, in qualitative agreement with the recently observed increase in the magnon diffusion length in FeO at lower temperatures. Our result suggests that the thermoelectric performance of the SSE in multilayer structures can be further improved by careful choice of materials with suitable spin transport properties., This work was supported by the Spanish Ministry of Science (through projects MAT2014-51982-C2-R, including FEDER funding), the Aragón Regional Government (project E26), Thermo-spintronic Marie-Curie CIG (Grant Agreement No. 304043), JST-PRESTO “Phase Interfaces for Highly Efficient Energy Utilization” from JST, Japan, Grant-in-Aid for Scientific Research on Innovative Areas “Nano Spin Conversion Science” (26103005), Grant-in-Aid for Scientific Research (A) (15H02012) from MEXT, Japan, NEC Corporation, and The Noguchi Institute. T.K. is supported by JSPS through a research fellowship for young scientists (15J08026)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin-phonon coupling in epitaxial Sr0.6Ba0.4MnO3 thin films

  • Goian, V.
  • Langenberg, Eric
  • Marcano, N.
  • Bovtun, V.
  • Maurel, Laura
  • Kempa, M.
  • Prokscha, Thomas
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Kamba, S.
Under the terms of the Creative Commons Attribution license.-- et al., Spin-phonon coupling is investigated in epitaxially strained Sr1-xBaxMnO3 thin films with perovskite structure by means of microwave (MW) and infrared (IR) spectroscopy. In this work we focus on the Sr0.6Ba0.4MnO3 composition grown on (LaAlO3)0.3(Sr2AlTaO6)0.7 substrate. The MW complex electromagnetic response shows a decrease in the real part and a clear anomaly in the imaginary part around 150 K. Moreover, it coincides with a 17% hardening of the lowest-frequency polar phonon seen in IR reflectance spectra. In order to further elucidate this phenomenon, low-energy muon-spin spectroscopy was carried out, signaling the emergence of antiferromagnetic order with Néel temperature (TN) around 150 K. Thus, our results confirm that epitaxial Sr0.6Ba0.4MnO3 thin films display strong spin-phonon coupling below TN, which may stimulate further research on tuning the magnetoelectric coupling by controlling the epitaxial strain and chemical pressure in the Sr1-xBaxMnO3 system., Part of this work was supported by the Czech Science Foundation (Projects No. 14-14122P and No. 15–08389S) and by MSMT KONTAKT II project LH 15122. Financial support from Spanish Ministerio de Economía y Competitividad through project MAT2014-51982-C2 and from regional Gobierno de Aragon through project E26 including FEDER funding is also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Competition between Superconductor – Ferromagnetic stray magnetic fields in YBa2Cu3O7−x films pierced with Co nano-rods

  • Rouco, Víctor
  • Córdoba, Rosa
  • Teresa, José María de
  • Rodríguez, Luis A.
  • Navau, Carles
  • Del Valle, Nuria
  • Via, G.
  • Sánchez, A.
  • Monton, Carlos M.
  • Kronast, Florian
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Palau, Anna
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC) - ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors., This work has been supported by Spanish MINECO and FEDER (MAT2014-51778-C2-1R, CSD2007-0041, MAT2014-51982-C2-1-R and MAT2015-69725-REDT, MAT2016-79426-P), Severo Ochoa SEV2015-0496 program, Generalitat de Catalunya (2014-SGR-00753, 2014-SGR-150, 2014-PROD00059), Aragon regional government projects, including FEDER funding, European Seventh Framework Program (FP7/2007-2013) under grant agreement 312284, EU-NMP-LA-2012-280432 EUROTAPES project and Cost Actions MP1201 and CM1301 (CELINA). A. Sanchez acknowledges a grant from ICREA Academia, funded by the Generalitat de Catalunya. We are grateful to I. Rivas and R. Valero from LMA-INA (Zaragoza, Spain) for experimental help in the cobalt growth and Ar+ milling processes, and Dr C. Magén and Dr. P. Algarabel from LMA-INA (Zaragoza, Spain) for facilitating the use of their high performance computing server to perform the micromagnetic simulations. We acknowledge R. Morales from UPV/EHU and Ikerbasque, A. Fernández-Pacheco from U. Cambridge and S. Valencia from Helmholtz-Zentrum, Berlin for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural and magnetic properties of [001] CoCr2O4 thin films

  • Guzmán, Roger
  • Heuver, Jeroen
  • Matzen, Sylvia
  • Magén, César
  • Noheda, Beatriz
The spinel CoCr2O4 (CCO) is one of the few bulk multiferroics with net magnetic moment. However, studies on the properties of CCO thin films are scarce. Here, we investigate the interplay between microstructure and magnetism of a series of CCO epitaxial thin films by means of x-ray diffraction, magnetometry, and aberration-corrected scanning transmission electron microscopy (STEM). Optimum pristine CCO films can be grown on a substrate with spinel structure (MgAl2O4), despite the large lattice mismatch of ∼3%. On the contrary, a substrate with lower lattice mismatch (∼1%) but with the rock salt structure (MgO) favors the degradation of the CCO crystal quality by forming antiphase boundaries (APBs), drastically weakening the magnetization, in agreement with reports for other spinel films. Nevertheless, our results also show that the type and number of APBs can be tuned by changing the growth temperature to favor the ferromagnetic alignment between antiphase domains, giving rise to a partial recovery of the magnetization., Financial support is acknowledged from the European Union under the Seventh Framework Programme under a contract for an Integrated Infrastructure Initiative Reference No. 312483-ESTEEM2, the Spanish Ministerio de Economía y Competitividad through Project No.MAT2014-51982-C2 and through the “Severo Ochoa” award Programme for Centres of Excellence in R&D (Project No. SEV-2015-0496), the Zernike Institute for Advanced Materials, The Netherlands, regional Gobierno de Aragón through Project No. E26, including Fondo Europeo de Desarrollo Regional (FEDER) funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical and structural analysis of sub-20 nm graphene patterns generated by scanning probe lithography

  • Dago, Arancha I.
  • Sangiao, S.
  • Fernández-Pacheco, Rodrigo
  • Teresa, José María de
  • García García, Ricardo
Sub-20 nm patterns have been fabricated by using oxidation scanning probe lithography on epitaxial graphene. The structural and chemical properties of these nanopatterns have been characterized by high resolution transmission electron microscopy, energy dispersive X-ray spectroscopy and electron energy loss spectroscopy. The electron microscopy images reveal that the nanolithography process modifies the graphene monolayer and a thin region of the SiC substrate (1 nm thick). Spatially-resolved electron spectroscopies show that the nanopatterns are made of graphene oxide. The combination of spatially-resolved structural and chemical analysis of graphene nanopatterns will enable the development of high-performance graphene devices., Financial support by several projects are acknowledged: MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R and MAT2015-69725-REDT, MAT2016-76507-R from MINECO (including FEDER funding) and Aragón Regional Government. This work was also funded by the European Union FP7/2007-2013 under Grant Agreement No. 318804 (SNM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth and structural characterization of strained epitaxial Hf0.5Zr0.5O2 thin films

  • Torrejón, Luis
  • Langenberg, Eric
  • Magén, César
  • Larrea, Ángel
  • Blasco, Javier
  • Santiso, José
  • Algarabel, Pedro A.
  • Pardo, José A.
Ferroelectricity was recently reported in thin films with several compositions in the HfO2−Zr2 system with orthorhombic crystal structure. In the present paper we study the growth by pulsed laser deposition and the structural characterization of strained epitaxial Hf0.5Zr0.5O2 films on (001)-oriented yttria-stabilized zirconia (YSZ) substrates. We have determined the conditions for the coherent growth and correlated the deposition parameters with the films structure and microstructure studied through a combination of x-ray diffraction, electron backscatter diffraction, and scanning transmission electron microscopy. In the range of experimental parameters explored, all the films show monoclinic structure with distorted lattice parameters relative to bulk., This work was partially supported by Ministerio de Economía y Competitividad through projects MAT2014-51982-C2, MAT2015-68760-C2-1-P and MAT2017-82970-C2, and from regional Gobierno de Aragón through project E26 including FEDER funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NanoSQUID magnetometry on individual as-grown and annealed Co nanowires at variable temperature

  • Martínez Pérez, M. J.
  • Pablo-Navarro, Javier
  • Müller, B.
  • Kleiner, R.
  • Magén, César
  • Koelle, D.
  • Teresa, José María de
  • Sesé Monclús, Javier
Performing magnetization studies on individual nanoparticles is a highly demanding task, especially when measurements need to be carried out under large sweeping magnetic fields or variable temperature. Yet, characterization under varying ambient conditions is paramount in order to fully understand the magnetic behavior of these objects, e.g., the formation of nonuniform states or the mechanisms leading to magnetization reversal and thermal stability. This, in turn, is necessary for the integration of magnetic nanoparticles and nanowires into useful devices, e.g., spin-valves, racetrack memories, or magnetic tip probes. Here, we show that nanosuperconducting quantum interference devices based on high critical temperature superconductors are particularly well suited for this task. We have successfully characterized a number of individual Co nanowires grown through focused electron beam induced deposition and subsequently annealed at different temperatures. Magnetization measurements performed under sweeping magnetic fields (up to ∼100 mT) and variable temperature (1.4-80 K) underscore the intrinsic structural and chemical differences between these nanowires. These point to significant changes in the crystalline structure and the resulting effective magnetic anisotropy of the nanowires, and to the nucleation and subsequent vanishing of antiferromagnetic species within the nanowires annealed at different temperatures., This work was partly funded and supported by the Spanish MINECO (MAT2014-51982-C2, MAT2015-73914-JIN, MAT2015-64083-R, MAT2015-69725-REDT, MAT2017-82970-C2-1-R, and MAT2017-82970-C2-2-R), the Aragón Regional Government through projects E26, E09_17R, and E13_17R (Construyendo Europa desde Aragón), COST Action CA16218, COST Project CELINA, and the Deutsche Forschungsgemeinschaft via project KO 1301/13-2. J.P.-N. grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores of the Spanish MINECO (BOE 12/06/15) with the participation of the European Social Fund. B.M. gratefully acknowledges support by the German Academic Scholarship Foundation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transmission XMCD-PEEM imaging of an engineered vertical FEBID cobalt nanowire with a domain wall

  • Wartelle, A.
  • Pablo-Navarro, Javier
  • Staňo, M.
  • Bochmann, S.
  • Pairis, S.
  • Rioult, M.
  • Thirion, C.
  • Belkhou, R.
  • Teresa, José María de
  • Magén, César
  • Fruchart, Olivier
Using focused electron-beam-induced deposition, we fabricate a vertical, platinum-coated cobalt nanowire with a controlled three-dimensional structure. The latter is engineered to feature bends along the height: these are used as pinning sites for domain walls, which are obtained at remanence after saturation of the nanostructure in a horizontally applied magnetic field. The presence of domain walls is investigated using x-ray magnetic circular dichroism (XMCD) coupled to photoemission electron microscopy (PEEM). The vertical geometry of our sample combined with the low incidence of the x-ray beam produce an extended wire shadow which we use to recover the wire's magnetic configuration. In this transmission configuration, the whole sample volume is probed, thus circumventing the limitation of PEEM to surfaces. This article reports on the first study of magnetic nanostructures standing perpendicular to the substrate with XMCD-PEEM. The use of this technique in shadow mode enabled us to confirm the presence of a domain wall without direct imaging of the nanowire., This work was supported by Spanish Ministry of Economy and Competitivity through projects No. MAT2014-51982C2-1-R, MAT2014-51982C2-2-R and MAT2015-69725-REDT, including FEDER funds, and by the Aragon Regional Government (Construyendo Europa desde Aragón) through project E26, with FEDER funding. Javier Pablo-Navarro grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretaría de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness (MINECO) with the participation of the European Social Fund. Michal Staňo acknowledges grant from the Laboratoire d’excellence LANEF in Grenoble (ANR10-LABX-51-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vertical growth of superconducting crystalline hollow nanowires by He+ focused ion beam induced deposition

  • Córdoba, Rosa
  • Ibarra, Alfonso
  • Mailly, Dominique
  • Teresa, José María de
Novel physical properties appear when the size of a superconductor is reduced to the nanoscale, in the range of its superconducting coherence length (ξ0). Such nanosuperconductors are being investigated for potential applications in nanoelectronics and quantum computing. The design of three-dimensional nanosuperconductors allows one to conceive novel schemes for such applications. Here, we report for the first time the use of a He+ focused-ion-beam-microscope in combination with the W(CO)6 precursor to grow three-dimensional superconducting hollow nanowires as small as 32 nm in diameter and with an aspect ratio (length/diameter) of as much as 200. Such extreme resolution is achieved by using a small He+ beam spot of 1 nm for the growth of the nanowires. As shown by transmission electron microscopy, they display grains of large size fitting with face-centered cubic WC1–x phase. The nanowires, which are grown vertically to the substrate, are felled on the substrate by means of a nanomanipulator for their electrical characterization. They become superconducting at 6.4 K and show large critical magnetic field and critical current density resulting from their quasi-one-dimensional superconducting character. These results pave the way for future nanoelectronic devices based on three-dimensional nanosuperconductors., This work was supported by the financial support from Spanish Ministry of Economy and Competitiveness through the projects MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R, MAT2017-82970-C2-2-R, and from regional Gobierno de Aragon through project E26 and E81 with European Social Fund. R.C. acknowledges Juan de la Cierva-Incorporacion 2014 program. This project has received funding from the EU-H2020 research and innovation programme under Grant Agreement No. 654360 NFFA-Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

55Mn NMR observation of colossal magnetoresistance effect in Sm0.55Sr0.45MnO3

  • Michalik, Jan M.
  • Rybicki, D.
  • Tarnawski, Z.
  • Sikora, Marcin
  • Teresa, José María de
  • Ibarra, M. Ricardo
  • Kapusta, Cz.
Temperature dependent 55Mn NMR study of Sm0.55Sr0.45MnO3 is reported. Previous bulk magnetization measurements have shown that below T C ~ 125 K the sample is ferromagnetic metallic (FMM) and above TC it is charge ordered and insulating. In present report, we show that from zero-field NMR a single line double-exchange (DE) signal is observed at temperatures up to 139 K, which is due to a presence of FMM clusters also above T C. The intensity of the DE line follows the temperature dependence of the magnetization measured at 0.01 T. When a magnetic field up to 2 T is applied at 139 K (i.e. 14 K above T C), a strong increase in NMR intensity of the DE line is observed indicating that content of FMM regions increases. This reveals that metallicity is induced in the material by the applied magnetic field and explains the observed colossal magnetoresistance (CMR) effect at the microscopic level. The observation agrees with previous results, which confirm that the percolation of the FMM clusters is responsible for the CMR effect. The shift of the resonant frequency in the applied field is three times smaller compared to decrease expected from gyromagnetic ratio, which indicates an antiferromagnetic coupling between the FMM clusters., This research was supported by the Polish Ministry of Science and Higher Education (MNiSzW), the Spanish Ministry of Science (through Project No. MAT2014-51982-C2-R, including European social fund) and the Aragón Regional government (Project No.E26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical solution synthesis and ferromagnetic resonance of epitaxial thin films of yttrium iron garnet

  • Lucas, Irene
  • Jiménez-Cavero, Pilar
  • Vila-Fungueiriño, José M.
  • Magén, César
  • Sangiao, S.
  • Teresa, José María de
  • Morellón, Luis
  • Rivadulla, Francisco
We report the fabrication of epitaxial Y3Fe5O12 (YIG) thin films on Gd3Ga5O12 (111) using a chemical solution method. Cubic YIG is a ferrimagnetic material at room temperature, with excellent magneto-optical properties, high electrical resistivity, and a very narrow ferromagnetic resonance, which makes it particularly suitable for applications in filters and resonators at microwave frequencies. But these properties depend on the precise stoichiometry and distribution of Fe3+ ions among the octahedral/tetrahedral sites of a complex structure, which hampered the production of high-quality YIG thin films by affordable chemical methods. Here we report the chemical solution synthesis of YIG thin films, with excellent chemical, crystalline, and magnetic homogeneity. The films show a very narrow ferromagnetic resonance (long spin relaxation time), comparable to that obtained from high-vacuum physical deposition methods. These results demonstrate that chemical methods can compete to develop nanometer-thick YIG films with the quality required for spintronic devices and other high-frequency applications., This work was supported by the Ministry of Science of Spain (Projects No. MAT2016-80762-R, MAT2017-82970-C2-R, and No. MAT2014-51982-C2), the Consellería de Cultura, Educación e Ordenación Universitaria, Xunta de Galicia (ED431F 2016/008, and Centro Singular de Investigación de Galicia Accreditation 2016–2019, ED431G/09), the European Regional Development Fund (ERDF), and the Aragón Regional Government through Projects E26. The microscopy works have been conducted in the Laboratorio de Microscopías Avanzadas (LMA) at Instituto de Nanociencia de Aragón (INA), Universidad de Zaragoza. The authors acknowledge the LMA-INA for offering access to their instruments and expertise. Pilar Jiménez-Cavero acknowledges Spanish MECD for support through FPU program (Reference No. FPU014/02546)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlling the electrical and magnetoelectric properties of epitaxially strained Sr1−xBaxMnO3 thin films

  • Langenberg, Eric
  • Maurel, Laura
  • Marcano, N.
  • Guzmán, Roger
  • Štrichovanec, Pavel
  • Prokscha, Thomas
  • Magén, César
  • Algarabel, Pedro A.
  • Pardo, José A.
The perovskite (Sr,Ba)MnO3 system is an ideal candidate for tailoring electrical and magnetoelectric properties through the accurate control of Ba content and epitaxial strain due to the strong coupling between polar instability, spin order, and lattice. Here, first, the polar order is proved to be induced in Sr1−xBaxMnO3 thin films through lattice expansion either by epitaxial strain or chemical pressure, which correlates with the evolution of the dielectric properties. Second, due to strong spin–phonon coupling, a large magnetoelectric response is found in the (Sr,Ba)MnO3 system, in which the dielectric constant drops up to 50% when the antiferromagnetic order emerges, larger than most magnetoelectric oxides. More important, this coupling between magnetism and dielectric properties can be tuned from ≈18% to ≈50% by appropriately selecting Ba content and epitaxial strain. Third, a clear trend of increasing the band gap energy on increasing the unit cell volume either by epitaxial strain or chemical pressure is found, which opens the way for engineering the semiconducting properties of (Sr,Ba)MnO3 system at will. Thus, this work proves the possibility to design the electrical response and the magnetoelectric coupling in (Sr,Ba)MnO3 system., Financial support from Spanish Ministerio de Economía y Competitividad through project MAT2014-51982-C2 and from regional Gobierno de Aragón through project E26 including FEDER funding is also acknowledged. The low-energy μSR measurements were performed at the Swiss Muon Source SμS, Paul Scherrer Institut, Villigen, Switzerland. R.G. and C.M. were funded by the European Union under the Seventh Framework Programme under a contract for an Integrated Infrastructure Initiative Reference 312483-ESTEEM2. R.G. was also supported by the ERC StG “STEMOX” 239739., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancement of the spin Peltier effect in multilayers

  • Uchida, K.
  • Iguchi, R.
  • Daimon, S.
  • Ramos, R.
  • Anadón, Arturo
  • Lucas, Irene
  • Algarabel, Pedro A.
  • Morellón, Luis
  • Aguirre, Myriam H.
  • Ibarra, M. Ricardo
  • Saitoh, E.
The spin Peltier effect (SPE), heat-current generation as a result of spin-current injection, has been investigated in alternately stacked Pt/Fe3O4 multilayer films. The temperature modulation induced by the SPE in the [Pt/Fe3O4]×n films was found to be significantly enhanced with increasing the number of Pt/Fe3O4 bilayers n. This SPE enhancement is much greater than that expected for a simple stack of independent Pt/Fe3O4 bilayers. The observed n dependence of the SPE can be explained by introducing spin-current redistribution in the multilayer films in the thickness direction, in a manner similar to the enhancement of the spin Seebeck effect in multilayers., This work was supported by PRESTO “Phase Interfaces for Highly Efficient Energy Utilization” (Grant No. JPMJPR12C1) and ERATO “Spin Quantum Rectification Project” (Grant No. JPMJER1402) from JST, Japan; Grantin-Aid for Scientific Research (A) (Grant No. JP15H02012) and Grant-in-Aid for Scientific Research on Innovative Area, “Nano Spin Conversion Science” (Grant No. JP26103005), from JSPS KAKENHI, Japan; the NEC Corporation; the Noguchi Institute; E-IMR, Tohoku University; H2020-MSCARISE-2016 SPICOLOST (Grant No. 734187); the Spanish Ministry of Economy and Competitiveness (Grant No. MAT2014-51982-C-R, including FEDER), Spain; and the Aragon regional government (E26), Spain. S.D. is supported by JSPS through a research fellowship for young scientists (Grant No. JP16J02422)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functionalized Akiyama tips for magnetic force microscopy measurements

  • Stiller, Markus
  • Barzola-Quiquia, José
  • Esquinazi, Pablo D.
  • Sangiao, S.
  • Teresa, José María de
  • Meijer, Jan
  • Abel, Bernd
In this work we have used focused electron beam induced deposition of cobalt to functionalize atomic force microscopy Akiyama tips for application in magnetic force microscopy. The grown tips have a content of  ≈90~\% Co after exposure to ambient air. The magnetic tips were characterized using energy dispersive x-ray spectroscopy and scanning electron microscopy. In order to investigate the magnetic properties, current loops were prepared by electron beam lithography. Measurements at room temperature as well as 4.2 K were carried out and the coercive field of  ≈6.8 mT of the Co tip was estimated by applying several external fields in the opposite direction of the tip magnetization. Magnetic Akiyama tips open new possibilities for wide-range temperature magnetic force microscopy measurements., This work was supported by the European Cooperation in Science and Technology (COST) through COST Action CM1301, 'Chemistry for Electron-Induced Nanofabrication' (CELINA), by the DFG through the Collaborative Research Center SFB 762 'Functionality of Oxide Interfaces' and by the DFG-ES86/29-1. This work was supported by the Spanish Ministry of Economy and Competitivity through projects No. MAT2014-51982-C2-1-R and MAT2015-69725-REDT (including FEDER funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights on the origin of the Tb5Ge4 magnetocaloric effect

  • Belo, J. H.
  • Barbosa, Marcelo B.
  • Pires, A. L.
  • Costa, Rui M.
  • Teixeira, J.G.V.
  • Silva-Treviño, J.
  • Algarabel, Pedro A.
  • Magén, César
  • Morellón, Luis
  • Amaral, J.S.
  • Zeitler, U.
  • Veerendra, G.
  • Santos, A. M. dos
  • Ren, Y.
  • Ibarra, M. Ricardo
  • Araújo, J. P.
  • Pereira, A.M.
In this report the magnetic, atomic structures and spin-lattice coupling have been thoroughly studied through high magnetic field magnetometry, Synchrotron X-ray diffraction under applied magnetic field and magnetostriction measurements in the Tb5Ge4 compounds. A field induced phase transition from an antiferromagnetic towards a ferromagnetic ordering was confirmed but with absence of structural transformation. This absence has been confirmed experimentally through synchrotron x-ray diffraction under applied field (up to 30 T). Moreover, this absence was explained via a thermodynamic free energy model: first principles calculations determined a large energy gap (ΔE=0.65 eV) between the two possible structures, O(I) and O(II). From magnetic and structural properties, a H-T phase diagram has been proposed for Tb5Ge4. Finally it was observed a large magnetostriction (up to 600 ppm) induced by ∆H=7 T., Work partially supported by the projects FEDER/POCTI no. 155/94, PTDC/CTM/NAN/5414/2014 from Fundacao para a Ciencia e Tecnologia (FCT), Portugal. J.H.B. Silva and M. B. Barbosa thanks FCT for the Grant SFRH/BD/88440/2012 and SFRH/BD/97591/2013, respectively. C.M. acknowledges the support of the Fundación ARAID. This work was supported by the Spanish Ministry of Science (through Project Nos. MAT2014- 51982-C2-R and C1-R, including FEDER funding) and the Aragon Regional government (Project No. E26). Use of the Advanced Photon Source at Argonne National Laboratory was supported by the U.S. Department of Energy, Office of Science, Offce of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. Use of the High Magnetic Field Laboratory at Nijmegen was supported by contract no: NMA01-111., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic properties of optimized cobalt nanospheres grown by focused electron beam induced deposition (FEBID) on cantilever tips

  • Sangiao, S.
  • Magén, César
  • Mofakhami, Darius
  • Loubens, Grégoire de
  • Teresa, José María de
In this work, we present a detailed investigation of the magnetic properties of cobalt nanospheres grown on cantilever tips by focused electron beam induced deposition (FEBID). The cantilevers are extremely soft and the cobalt nanospheres are optimized for magnetic resonance force microscopy (MRFM) experiments, which implies that the cobalt nanospheres must be as small as possible while bearing high saturation magnetization. It was found that the cobalt content and the corresponding saturation magnetization of the nanospheres decrease for nanosphere diameters less than 300 nm. Electron holography measurements show the formation of a magnetic vortex state in remanence, which nicely agrees with magnetic hysteresis loops performed by local magnetometry showing negligible remanent magnetization. As investigated by local magnetometry, optimal behavior for high-resolution MRFM has been found for cobalt nanospheres with a diameter of ≈200 nm, which present atomic cobalt content of ≈83 atom % and saturation magnetization of 106 A/m, around 70% of the bulk value. These results represent the first comprehensive investigation of the magnetic properties of cobalt nanospheres grown by FEBID for application in MRFM., This work was supported by Spanish Ministry of Economy and Competitivity through projects No. MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R and MAT2015-69725-REDT (including FEDER funds), by the Aragon Regional Government, and by EU (Cost Action CM1301- CELINA and ESTEEM2 projects)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the nature of the (de)coupling of the magnetostructural transition in Er5Si4

  • Costa, Rui M.
  • Belo, J. H.
  • Barbosa, Marcelo B.
  • Algarabel, Pedro A.
  • Magén, César
  • Morellón, Luis
  • Ibarra, M. Ricardo
  • Gonçalves, Joâo N.
  • Fortunato, Nuno M.
  • Amaral, J.S.
  • Araújo, J. P.
  • Pereira, A.M.
In this report, a successful thermodynamical model was employed to understand the structural transition in Er5Si4, able to explain the decoupling of the magnetic and structural transition. This was achieved by DFT calculations, which were used to determine the energy differences at 0 K, using a LSDA + U approximation. It was found that the M structure is the stable phase at low temperatures, as verified experimentally with a value of ΔF0 = −0.262 eV. Finally, a variation of Seebeck coefficient (∼6 μV) was determined at the structural transition, which allows to conclude that the electronic entropy variation is negligible in the transition., This work was partially supported by the projects FEDER/POCTI n0155/94, PTDC/CTM/NAN/5414/2014 from Fundação para a Ciência e Tecnologia (FCT), Portugal. The authors thank the Portuguese Foundation for Science and Technology (FCT) for grants SFRH/BD/88440/2012 (JHB) and SFRH/BD/97591/2013 (MSB), SFRH/BD/97591/2013 (MBB), SFRH/BPD/82059/2011 (JNG), IF/01089/2015 (JSA). This work was developed within the scope of the project CICECO‐Aveiro Institute of Materials, POCI‐01‐0145‐FEDER‐007679 (FCT Ref. UID /CTM /50011/2013), financed by national funds through the FCT/MEC and when appropriate co‐financed by FEDER under the PT2020 Partnership Agreement. C.M. acknowledges the support of the Fundación ARAID. This work was supported by the Spanish Ministry of Science (through Project Nos. MAT2014‐ 51982‐C2‐R and C1‐R, including FEDER funding) and the Aragon Regional government (Project No. E26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Proximity-induced superconductivity in bismuth nanostripes

  • Sangiao, S.
  • Casado, Laura
  • Morellón, Luis
  • Ibarra, M. Ricardo
  • Teresa, José María de
We show here that superconductivity can be induced in bismuth nanostripes through electrical contact with an s-wave superconductor. By studying the electrical transport properties of devices containing a bismuth nanostripe with superconducting contacts, we have found that bismuth nanostripes with inner probe distance shorter than 125 nm become superconductor at temperatures above 2 K due to proximity-induced superconductivity. This finding, along with previously demonstrated large spin–orbit coupling in bismuth, opens the way to the design of bismuth-based nanostructures bearing Majorana bound states., Financial support by several projects is acknowledged: MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R and MAT2015-69725-REDT from MINECO (including FEDER funding) and Aragón Regional Government through project E26—Construyendo Europa desde Aragón., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin Seebeck effect in insulating epitaxial γ−Fe2O3 thin films

  • Jiménez-Cavero, Pilar
  • Lucas, Irene
  • Anadón, Arturo
  • Ramos, R.
  • Niizeki, T.
  • Aguirre, Myriam H.
  • Algarabel, Pedro A.
  • Uchida, K.
  • Ibarra, M. Ricardo
  • Saitoh, E.
  • Morellón, Luis
We report the fabrication of high crystal quality epitaxial thin films of maghemite (γ−Fe2O3), a classic ferrimagnetic insulating iron oxide. Spin Seebeck effect (SSE) measurements in γ−Fe2O3/Pt bilayers as a function of sample preparation conditions and temperature yield a SSE coefficient of 0.5(1) µV/K at room temperature. Dependence on temperature allows us to estimate the magnon diffusion length in maghemite to be in the range of tens of nanometers, in good agreement with that of conducting iron oxide magnetite (Fe3O4), establishing the relevance of spin currents of magnonic origin in magnetic iron oxides., This work was supported by the Spanish Ministry of Science (through Project Nos. MAT2014- 51982-C2-R and C1-R, including FEDER funding) and the Aragon Regional government (Project ´ No. E26). Pilar Jimenez-Cavero acknowledges Spanish MECD for support through FPU program ´ (Reference No. FPU014/02546). The authors acknowledge the Advanced Microscopy LaboratoryINA University of Zaragoza for offering access to their instruments. This work was supported by PRESTO “Phase Interfaces for Highly Efficient Energy Utilization” and ERATO “Spin Quantum Rectification” from JST, Japan, Grant-in-Aid for Scientific Research (A) (No. 15H02012), Grant-inAid for Scientific Research on Innovative Area, “Nano Spin Conversion Science” (No. 26103005) from MEXT, Japan, NEC Corporation, and the Noguchi Institute., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Suspended tungsten-based nanowires with enhanced mechanical properties grown by focused ion beam induced deposition

  • Córdoba, Rosa
  • Lorenzoni, Matteo
  • Pablo-Navarro, Javier
  • Magén, César
  • Perez Murano, Francesc X.
  • Teresa, José María de
The implementation of three-dimensional (3D) nano-objects as building blocks for the next generation of electro-mechanical, memory and sensing nano-devices is at the forefront of technology. The direct writing of functional 3D nanostructures is made feasible by using a method based on focused ion beam induced deposition (FIBID). We use this technique to grow horizontally suspended tungsten nanowires and then study their nano-mechanical properties by three-point bending method with atomic force microscopy. These measurements reveal that these nanowires exhibit a yield strength up to 12 times higher than that of the bulk tungsten, and near the theoretical value of 0.1 times the Young's modulus (E). We find a size dependence of E that is adequately described by a core-shell model, which has been confirmed by transmission electron microscopy and compositional analysis at the nanoscale. Additionally, we show that experimental resonance frequencies of suspended nanowires (in the MHz range) are in good agreement with theoretical values. These extraordinary mechanical properties are key to designing electro-mechanically robust nanodevices based on FIBID tungsten nanowires., This work was supported by the financial support from Spanish Ministry of Economy and Competitiveness through the projects CSD2010-00024, MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R, TEC2015-69864-R, MAT2015-69725-REDT (including FEDER funding) and from regional Gobierno de Aragón through project E26 with European Social Fund and COST-Celina project. R C acknowledges Juan de la Cierva-Incorporación 2014 program. J P-N grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretaría de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness (MINECO) with the participation of the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Terahertz spin currents and inverse spin Hall effect in thin-film heterostructures containing complex magnetic compounds

  • Seifert, T.
  • Martens, U.
  • Günther, S.
  • Schoen, M. A. W.
  • Radu, F.
  • Chen, X. Z.
  • Lucas, Irene
  • Ramos, R.
  • Aguirre, Myriam H.
  • Algarabel, Pedro A.
  • Anadón, Arturo
  • Körner, H. S.
  • Walowski, J.
  • Back, C.
  • Ibarra, M. Ricardo
  • Morellón, Luis
  • Saitoh, E.
  • Wolf, M.
  • Song, Cunfeng
  • Uchida, K.
  • Münzenberg, M.
  • Radu, I.
  • Kampfrath, T.
Terahertz emission spectroscopy (TES) of ultrathin multilayers of magnetic and heavy metals has recently attracted much interest. This method not only provides fundamental insights into photoinduced spin transport and spin–orbit interaction at highest frequencies, but has also paved the way for applications such as efficient and ultrabroadband emitters of terahertz (THz) electromagnetic radiation. So far, predominantly standard ferromagnetic materials have been exploited. Here, by introducing a suitable figure of merit, we systematically compare the strength of THz emission from X/Pt bilayers with X being a complex ferro-, ferri- and antiferromagnetic metal, that is, dysprosium cobalt (DyCo5), gadolinium iron (Gd24Fe76), magnetite (Fe3O4) and iron rhodium (FeRh). We find that the performance in terms of spin-current generation not only depends on the spin polarization of the magnet's conduction electrons, but also on the specific interface conditions, thereby suggesting TES to be a highly interface-sensitive technique. In general, our results are relevant for all applications that rely on the optical generation of ultrafast spin currents in spintronic metallic multilayers., This work was supported by ERATO "Spin Quantum Rectification Project" (Grant No. JPMJER1402) and PRESTO "Phase Interfaces for Highly Efficient Energy Utilization" (Grant No. JPMJPR12C1) from JST, Japan, Grant-in-Aid for Scientific Research (A) (JP15H02012), Grant-inAid for Scientific Research on Innovative Area "Nano Spin Conversion Science" (Grant No. JP26103005) from JSPS KAKENHI, Japan and H2020-MSCA-RISE-2016 SP1COLOST (Grant No. 734187). The authors acknowledge support by the Spanish Ministry of Economy and Competitiveness (through Project Nos. MAT2014-51982-C-R, including FEDER funding) and the Aragon Regional government (Project No. E26). I.R. acknowledges funding from German Ministry for Education and Research (BMBF) through project 05K16BCA Femto-THz-X. T. S. and T. K. acknowledge funding through the ERC H2020 CoG project TERAMAG/grant No. 681917 and through the DFG priority program SPP 1538/SpinCaT., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning shape, composition and magnetization of 3D cobalt nanowires grown by focused electron beam induced deposition (FEBID)

  • Pablo-Navarro, Javier
  • Sanz-Hernández, Dédalo
  • Magén, César
  • Fernández-Pacheco, Amalio
  • Teresa, José María de
Electron beam induced deposition of 3D cobalt nanowires with simultaneous high metallic content (≈80% at.) and small diameter (<100 nm) has been achieved by optimization of the growth parameters. Two different growth modes have been identified, denoted as radial and linear. In the radial mode, the wire diameter is at least ≈120 nm and the Co content is greater than ≈85% at. In the linear mode, the diameter is smaller than 80 nm and the Co content is at best ≈80% at. A sharp transition between both growth modes can occur inside a single nanowire for certain experimental conditions. Electron holography measurements indicate that in optimized Co nanowires the magnetic induction is high enough for applications in spintronics, magnetic sensing and actuation at the nanoscale., This work was supported by the Spanish Ministry of Economy and Competitivity through projects No. MAT2014-51982C2-1-R, MAT2014-51982C2-2-R and MAT2015-69725-REDT, including FEDER funds and by the Aragon Regional Government (Construyendo Europa desde Aragón) through project E26, with FEDER funding. This work was conducted within the framework of the COST Action CM1301 (CELINA). AFP acknowledges funding from a EPSRC Early Career Fellowship EP/M008517/1 and from a Winton Fellowship. In order to comply with EPSRC policy on research data, all metadata associated to this publication can be accessed via https://doi. org/10.17863/CAM.8106. JP-N grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretaría de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness (MINECO) with the participation of the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantification of the interfacial and bulk contributions to the longitudinal spin Seebeck effect

  • Jiménez-Cavero, Pilar
  • Lucas, Irene
  • Bugallo, David
  • López-Bueno, Carlos
  • Ramos, Rafael
  • Algarabel, Pedro A.
  • Ibarra, M. Ricardo
  • Rivadulla, Francisco
  • Morellón, Luis
We report the disentanglement of bulk and interfacial contributions to the thermally excited magnon spin current in the spin Seebeck effect under static heating. For this purpose, we have studied the dependence of the inverse spin Hall voltage and the thermal conductivity on the magnetic layer thickness. Knowledge of these quantities allows us to take into account the influence of both sources of thermal spin current in the analysis of the voltage dependence. The magnetic layer thickness modulates the relative magnitude of the involved thermal drops for a fixed total thermal difference throughout the sample. In the end, we attain the separate contributions of both sources of thermal spin current—bulk and interfacial—and obtain the value of the thermal magnon accumulation length scale in maghemite, which we find to be 29(1) nm. According to our results, bulk magnon accumulation dominates the spin Seebeck effect in our studied range of thicknesses, but the interfacial component is by no means negligible., This work was supported by the Spanish Ministry of Science [through Project Nos. MAT2014-51982-C2-R, MAT2016-80762-R, MAT2017-82970-C2-R, and PID2019-104150RB-I00 (including FEDER funding) and the Aragón Regional government (Project No. E26)]. P.J.-C. acknowledges Spanish MECD for support through FPU program (Reference No. FPU014/02546). D.B. acknowledges support from MINECO (Spain) through an FPI program (No. BES-2017-079688). R.R. also acknowledges support from the European Commission through the Project No. 734187-SPICOLOST (H2020-MSCA-RISE-2016), the European Union's Horizon 2020 research and innovation program through the Marie Sklodowska-Curie Actions Grant Agreement SPEC No. 894006, and the Spanish Ministry of Science (No. RYC 2019-026915-I). Authors acknowledge the Advanced Microscopy Laboratory-INA University of Zaragoza for offering access to their instruments. C. L-B. acknowledges Xunta de Galicia and ESF for a PhD Grant (ED481A-2018/013)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Building oriented nano-sheets in thin films of Co-MT (MT = V, Cr, Cu, Zn, Cd, Hf) and the generation and enhancement of their magnetic anisotropy

  • Favieres, Cristina
  • Vergara, José
  • Magén, César
  • Ibarra, M. Ricardo
  • Madurga, Vicente
Thin films of Co-rich transition metal or metal Co–MT (MT = V, Cr, Cu, Zn, Cd, Hf) compounds were fabricated as a superposition of oblique nano-sheets (≈300 x 80 × 5 nm for each nano-sheet) from a mixture of Co and MT plasmas. Because the X-ray diffraction patterns of all of the films showed a similar nano-crystalline microstructure, the oblique nano-sheets were visualized by high-resolution transmission electron microscopy. This nano-morphology generated strong in-plane uniaxial magnetic anisotropy, UMA, as we explained in this work, for all the as-deposited films. The evolution of this magnetic anisotropy was studied at temperatures up to 450 °C. Three different cases were observed after these heat treatments depending on the MT component of the film: (1) UMA was lost for temperatures ≈ 400 °C, (2) UMA retained the same value until the highest temperature was reached, or (3) UMA was enhanced by a factor greater than 2 for the highest temperature. This behavior can be explained by considering of the various processes of structural relaxation and crystallization produced by heat treatment and affected by the nano-sheet morphology., Partial financial support from the Public University of Navarre is acknowledged (grant “Prom-FTM 2014”). MRI and CM acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through projects MAT2014-51982-C2 including FEDER funding, the Aragón Regional Government through projects E26 and CTPP4/11 and by the European Union under the Seventh Framework Programme ESTEEM2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical disorder in topological insulators: A route to magnetism tolerant topological surface states

  • Martínez-Velarte, M. Carmen
  • Kretz, Bernhard
  • Moro-Lagares, María
  • Aguirre, Myriam H.
  • Riedemann, Trevor M.
  • Lograsso, Thomas A.
  • Morellón, Luis
  • Ibarra, M. Ricardo
  • Garcia-Lekue, Aran
  • Serrate, David
We show that the chemical inhomogeneity in ternary three-dimensional topological insulators preserves the topological spin texture of their surface states against a net surface magnetization. The spin texture is that of a Dirac cone with helical spin structure in the reciprocal space, which gives rise to spin-polarized and dissipation-less charge currents. Thanks to the nontrivial topology of the bulk electronic structure, this spin texture is robust against most types of surface defects. However, magnetic perturbations break the time-reversal symmetry, enabling magnetic scattering and loss of spin coherence of the charge carriers. This intrinsic incompatibility precludes the design of magnetoelectronic devices based on the coupling between magnetic materials and topological surface states. We demonstrate that the magnetization coming from individual Co atoms deposited on the surface can disrupt the spin coherence of the carriers in the archetypal topological insulator Bi2Te3, while in Bi2Se2Te the spin texture remains unperturbed. This is concluded from the observation of elastic backscattering events in quasiparticle interference patterns obtained by scanning tunneling spectroscopy. The mechanism responsible for the protection is investigated by energy resolved spectroscopy and ab initio calculations, and it is ascribed to the distorted adsorption geometry of localized magnetic moments due to Se–Te disorder, which suppresses the Co hybridization with the surface states., We acknowledge the use of SAI-Universidad de Zaragoza. T.M.R and T.A.L. acknowledge support by the U.S. Department of Energy (DOE), Office of Science, Basic Energy Sciences, Materials Science and Engineering Division. Ames Laboratory is operated for the U.S. DOE by Iowa State University under contract DE-AC02-07CH11358. Financial support was provided from Spanish MINECO (MAT2013-46593-C6-3-P, MAT2013-46593-C6-2-P and MAT2014-51982-C-R), European Comission (FP-7-PEOPLE-304043), and Gobierno de Aragón (E26). B.K. and A.G.L. were also funded by the Basque Departamento de Educación (IT-756-13)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of the spin Seebeck effect in Ni-Zn ferrites polycrystalline slabs

  • Arboleda, J. D.
  • Arnache, O.
  • Aguirre, Myriam H.
  • Ramos, Rafael
  • Anadón, Alberto
  • Ibarra, M. Ricardo
We report on the observation of the spin Seebeck effect in Ni-Zn ferrites slabs with different Zn concentration. All samples have a spinel structure confirmed by XRD and TEM. We fully characterize the magnetic properties by VSM and Mössbauer spectroscopy. Samples exhibit a nonmonotonic magnetization behavior depending on the structural inversion parameter, however we found a spin Seebeck response voltage of about 25.5 nV/K independent of the magnetization and the inversion degree., This work was supported by Solid State Group (GES) at the University of Antioquia in the framework of Sustainability Strategy 2016–2017; Colombian Science, technology and innovation department (COLCIENCIAS, PhD student grant, conv. 567); Municipality of Medellín through SAPIENCIA agency (EnlazaMundos program, conv. 2014). We also thank the Spanish Ministry of Science (through and MAT2014-51982-C2-R, including FEDER funding); the Aragón Regional Government (Project No. E26); and Thermo- Spintronic Marie Curie CIG (Grant Agreement No. 304043)- EU. Project No. PRI-PIBJP-2011-0794. This work was also supported by ERATO Spin Quantum Rectification Project (Grant No. JPMJER1402), Grant-in-Aid for Scientific Research on Innovative Area, Nano Spin Conversion Science (Grant No. JP26103005) from JSPS KAKENHI, Japan, and the NEC Corporation. This work was also supported by H2020-MSCA-RISE-2016 SPICOLOST (Grant No. 734187)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Independent control of the magnetization in ferromagnetic La2/3Sr1/3MnO3/SrTiO3/LaCoO3 heterostructures achieved by epitaxial lattice mismatch

  • Rivas-Murias, Beatriz
  • Lucas, Irene
  • Jiménez-Cavero, Pilar
  • Magén, César
  • Morellón, Luis
  • Rivadulla, Francisco
We report the effect of interface symmetry-mismatch on the magnetic properties of LaCoO3 (LCO) thin films. Growing epitaxial LCO under tensile strain on top of cubic SrTiO3 (STO) produces a contraction along the c axis and a characteristic ferromagnetic response. However, we report here that ferromagnetism in LCO is completely suppressed when grown on top of a buffer layer of rhombohedral La2/3Sr1/3MnO3 (LSMO), in spite of identical in-plane and out-of-plane lattice deformation. This confirms that it is the lattice symmetry mismatch and not just the total strain, which determines the magnetism of LCO. On the basis of this control over the magnetic properties of LCO, we designed a multilayered structure to achieve independent rotation of the magnetization in ferromagnetic insulating LCO and half-metallic ferromagnet LSMO. This is an important step forward for the design of spin-filtering tunnel barriers based on LCO., This work was supported by the European Research Council (ERC StG-259082, 2DTHERMS, 312483-ESTEEM2), MINECO of Spain (MAT2013-44673-R and MAT2014-51982-C2-R) including FEDER funding, by Xunta de Galicia (2012-CP071 and 2015-CP081), and by the Aragón Regional Government through projects E26 and CTPP4/11., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polar-graded multiferroic SrMnO3 thin films

  • Guzmán, Roger
  • Maurel, Laura
  • Langenberg, Eric
  • Lupini, Andrew R.
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Magén, César
Engineering defects and strains in oxides provides a promising route for the quest of thin film materials with coexisting ferroic orders, multiferroics, with efficient magnetoelectric coupling at room temperature. Precise control of the strain gradient would enable custom tailoring of the multiferroic properties but presently remains challenging. Here we explore the existence of a polar-graded state in epitaxially strained antiferromagnetic SrMnO3 thin films, whose polar nature was predicted theoretically and recently demonstrated experimentally. By means of aberration-corrected scanning transmission electron microscopy we map the polar rotation of the ferroelectric polarization with atomic resolution, both far from and near the domain walls, and find flexoelectricity resulting from vertical strain gradients. The origin of this particular strain state is a gradual distribution of oxygen vacancies across the film thickness, according to electron energy loss spectroscopy. Herein we present a chemistry-mediated route to induce polar rotations in oxygen-deficient multiferroic films, resulting in flexoelectric polar rotations and with potentially enhanced piezoelectricity., Financial support from Spanish Ministerio de Economía y Competitividad through the project MAT2014-51982-C2 and from regional Gobierno de Aragón through project E26 with European Social Fund funding is acknowledged. R.G. and C.M. were funded by the European Union under the Seventh Framework Programme under a contract for an Integrated Infrastructure Initiative Reference 312483-ESTEEM2. R.G. was also supported by the ERC StG “STEMOX” 239739. A.R.L. acknowledges support by the Materials Sciences and Engineering Division, Basic Energy Sciences, Office of Science, U.S. Department of Energy (ARL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Purified and crystalline three-dimensional electron-beam-induced deposits: The successful case of cobalt for high-performance magnetic nanowires

  • Pablo-Navarro, Javier
  • Magén, César
  • Teresa, José María de
Focused-electron-beam-induced deposition (FEBID) is considered the ultimate direct-write lithography technique for three-dimensional (3D) structures. However, it has not yet been possible to obtain 3D deposits by FEBID with the same purity and crystallinity of the corresponding bulk materials. In the present work, purified and crystalline 3D Co nanowires of diameter below 90 nm have been fabricated by ex situ high-vacuum annealing at 600 °C after FEBID growth. With an increase of the metallic content of the nanowires up to 95 atom %, the thermal annealing process induces recrystallization of the pseudoamorphous as-grown structure into bulklike, hexagonal-closest-packed, and face-centered-cubic crystallites with lateral sizes comparable to the nanowire’s width. The net magnetization increases 80% with respect to the as-grown values, up to 1.61 ± 0.06 T, near bulk Co. This achievement opens new pathways for applications of this synthetic method in the fabrication of either individual or arrays of 3D high-purity and crystalline Co nanowires for high-density memory and logic devices, nanosensors, and actuators, and could be a viable method to obtain other pure and crystalline 3D materials by FEBID., All authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through Projects MAT2014-51982-C2, MAT2015-69725-REDT and MAT2017-82970-C2, from the COST Project CELINA, and from the Aragon Regional Government (Construyendo Europa desde Aragón) through Project E26 with European Social Fund funding. A grant to J.P.-N. was funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretarı́a de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness with participation of the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin Seebeck effect in Y-type hexagonal ferrite thin films

  • Hirschner, J.
  • Maryško, M.
  • Hejtmánek, J.
  • Uhrecký, R.
  • Soroka, Miroslav
  • Buršík, Josef
  • Anadón, Alberto
  • Aguirre, Myriam H.
  • Knížek, K.
The longitudinal spin Seebeck effect (SSE) has been investigated using Pt/ferrite bilayers employing two Y-hexagonal ferrites Ba2⁢Zn2⁢Fe12⁢O22 (Zn2Y) and Ba2⁢Co2⁢Fe12⁢O22 (Co2Y) deposited by a spin-coating method on SrTiO3⁢(111) substrates. The prepared hexagonal ferrites are highly oriented with 𝑐 axes perpendicular to the substrate plane. The room-temperature magnetic moments of both ferrimagnetic ferrites amount to similar values and, most importantly, both have easy magnetization normal to the 𝑐 axis. Despite their similar magnetic response the notable SSE signal is only observed for Zn2Y whereas the SSE signal of Co2Y is below the experimental noise level. A plausible explanation for this surprising discrepancy is magnetic disorder induced by cobalt cations, the random distribution of which in the Co2Y ferrite structure might critically limit the spin-wave propagation. This results in suppression of the SSE signal in Co2Y, while the Zn2Y with nonmagnetic substituent exhibits significant SSE signal. The temperature dependence of SSE for Zn2Y was measured over the 30–300−K range and quantitatively analyzed considering the heat flow through the Pt/Zn2Y bilayer and thermal gradient across the Zn2Y thin layer as the most relevant parameters. Using this approach the normalized SSE smoothly increases with lowering temperature, which correlates to increasing magnon propagation length and magnetization with decreasing temperature., This work was supported by Project No. 14-18392S of the Czech Science Foundation, Grant No. SGS16/245/OHK4/3T/14 of the Czech Technical University in Prague, the Spanish Ministry of Economy and Competitiveness (Grant No. MAT2014-51982-C-R, including FEDER), and the Aragon Regional government (E26). The authors acknowledge the Advanced Microscopy Laboratory-INA, University of Zaragoza for offering access to their instruments. The work was also supported by Thermo-Spintronic FP7-PEOPLE-2011-Marie Curie, CIG Project No. 304043, and SPICOLOST project H2020-MSCA-2016 Grant No. 734187., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nature of antiferromagnetic order in epitaxially strained multiferroic SrMnO3 thin films

  • Maurel, L.
  • Marcano, N.
  • Prokscha, T.
  • Langenberg, E.
  • Blasco, J.
  • Guzmán, R.
  • Suter, A.
  • Magén, C.
  • Morellón, L.
  • Ibarra, M.R.
  • Pardo, J.A.
  • Algarabel, P.A.
Epitaxial films of SrMnO3 and bilayers of SrMnO3/La0.67Sr0.33MnO3 have been deposited by pulsed laser deposition on different substrates, namely, LaAlO3 (001), (LaAlO3)0.3(Sr2AlTaO6)0.7 (001), and SrTiO3 (001), allowing us to perform an exhaustive study of the dependence of antiferromagnetic order and exchange bias field on epitaxial strain. The Néel temperatures (TN) of the SrMnO3 films have been determined by low-energy muon spin spectroscopy. In agreement with theoretical predictions, TN is reduced as the epitaxial strain increases. From the comparison with first-principles calculations, a crossover from G-type to C-type antiferromagnetic orders is proposed at a critical tensile strain of around 1.6±0.1%. The exchange bias (coercive) field, obtained for the bilayers, increases (decreases) by increasing the epitaxial strain in the SrMnO3 layer, following an exponential dependence with temperature. Our experimental results can be explained by the existence of a spin-glass (SG) state at the interface between the SrMnO3 and La0.67Sr0.33MnO3 films. This SG state is due to the competition between the different exchange interactions present in the bilayer and favored by increasing the strain in the SrMnO3 layer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Epitaxial Stabilization of the Perovskite Phase in (Sr1-xBax)MnO3 Thin

  • Langenberg, E.
  • Guzmán, R
  • Maurel, L.
  • Martínez de Baños, L.
  • Morellón, L.
  • Ibarra, M.R.
  • Herrero-Martín, J.
  • Blasco, J.
  • Magén, C.
  • Algarabel, P.A.
  • Pardo, J.A.
A novel mechanism of ferroelectricity driven by off-centering magnetic Mn4+ ions was proposed in (Sr1–xBax)­MnO3, in its ideal perovskite phase, which yields enormous expectations in the search for strong magnetoelectric materials. Still, the desired perovskite phase has never been stabilized in thin films due to its extremely metastable character. Here, we report on a thorough study of the perovskite phase stabilization of (Sr1–xBax)­MnO3 thin films, 0.2 ≤ x ≤ 0.5, grown by pulsed laser deposition onto (001)-oriented perovskite substrates. X-ray diffraction measurements and scanning transmission electron microscopy reveal that, under appropriate deposition conditions, the perovskite phase is fully stabilized over the nonferroelectric hexagonal phase, despite the latter being increasingly favored on increasing Ba-content. Moreover, we have managed to grow epitaxial coherent cube-on-cube (Sr1–xBax)­MnO3 films upon strains ranging from 0% to 4%. Our results become a milestone in further studying perovskite (Sr1–xBax)­MnO3 thin films and pave the way for tailoring ferroic and magnetoelectric properties either by strain engineering or Ba-doping.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strain-induced coupling of electrical polarization and structural defects in SrMnO3 films

  • Becher, Carsten
  • Maurel, Laura
  • Aschauer, Ulrich
  • Lilienblum, Martin
  • Magén, César
  • Meier, Dennis
  • Langenberg, Eric
  • Trassin, Morgan
  • Blasco, Javier
  • Krug, Ingo P.
  • Algarabel, Pedro A.
  • Spaldin, Nicola A.
  • Pardo, José A.
  • Fiebig, Manfred
Local perturbations in complex oxides, such as domain walls, strain and defects, are of interest because they can modify the conduction or the dielectric and magnetic response, and can even promote phase transitions. Here, we show that the interaction between different types of local perturbations in oxide thin films is an additional source of functionality. Taking SrMnO 3 as a model system, we use nonlinear optics to verify the theoretical prediction that strain induces a polar phase, and apply density functional theory to show that strain simultaneously increases the concentration of oxygen vacancies. These vacancies couple to the polar domain walls, where they establish an electrostatic barrier to electron migration. The result is a state with locally structured room-temperature conductivity consisting of conducting nanosized polar domains encased by insulating domain boundaries, which we resolve using scanning probe microscopy. Our 'nanocapacitor' domains can be individually charged, suggesting stable capacitance nanobits with a potential for information storage technology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

3D Magnetic Induction Maps of Nanoscale Materials Revealed by Electron Holographic Tomography

  • Wolf, D.
  • Rodriguez, L.A.
  • Béché, A.
  • Javon, E.
  • Serrano, L.
  • Magen, C.
  • Gatel, C.
  • Lubk, A.
  • Lichte, H.
  • Bals, S.
  • Van Tendeloo, G.
  • Fernández-Pacheco, A.
  • De Teresa, J.M.
  • Snoeck, E.
The investigation of three-dimensional (3D) ferromagnetic nanoscale materials constitutes one of the key research areas of the current magnetism roadmap and carries great potential to impact areas such as data storage, sensing, and biomagnetism. The properties of such nanostructures are closely connected with their 3D magnetic nanostructure, making their determination highly valuable. Up to now, quantitative 3D maps providing both the internal magnetic and electric configuration of the same specimen with high spatial resolution are missing. Here, we demonstrate the quantitative 3D reconstruction of the dominant axial component of the magnetic induction and electrostatic potential within a cobalt nanowire (NW) of 100 nm in diameter with spatial resolution below 10 nm by applying electron holographic tomography. The tomogram was obtained using a dedicated TEM sample holder for acquisition, in combination with advanced alignment and tomographic reconstruction routines. The powerful approach presented here is widely applicable to a broad range of 3D magnetic nanostructures and may trigger the progress of novel spintronic nonplanar nanodevices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Contact-Free Mapping of Electronic Transport Phenomena of Polar Domains in SrMnO3 Films

  • Schaab, J.
  • Krug, I.P.
  • Doganay, H.
  • Hackl, J.
  • Gottlob, D.M.
  • Khan, M.I.
  • Nemsak, S.
  • Maurel, L.
  • Langenberg, E.
  • Algarabel, P.A.
  • Pardo, J.A.
  • Schneider, C.M.
  • Meier, D.
High-resolution mapping of electronic transport phenomena plays an increasingly important role for the characterization of ferroic domains and their functionality. At present, spatially resolved electronic transport data are commonly gained from local two-point measurements, collected in line-by-line scans with a conducting nanosized probe. Here, we introduce an innovative experimental approach based on low- energy electron microscopy. As a model case, we study polar domains of varying conductance in strained SrMnO3. By a direct comparison with conductive atomic force and electrostatic force microscopy, we reveal that the applied low-energy electron-microscopy experiment can be considered as an inverse IðVÞ measurement, providing access to the local electronic conductance with nanoscale resolution and short data-acquisition times in the order of 10–102 ms. Low-energy electrons thus hold yet unexplored application opportunities as a minimal-invasive probe for local electronic transport phenomena, opening a promising route towards spatially resolved, high-throughput sampling at the nanoscale.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of the shape and surface oxidation in the magnetization reversal of thin iron nanowires grown by focused electron beam induced deposition

  • Rodríguez, L.A.
  • Deen, L.
  • Córdoba, R.
  • Magén, C.
  • Snoeck, E.
  • Koopmans, B.
  • De Teresa, J.M.
Iron nanostructures grown by focused electron beam induced deposition (FEBID) are promising for applications in magnetic sensing, storage and logic. Such applications require a precise design and determination of the coercive field (HC), which depends on the shape of the nanostructure. In the present work, we have used the Fe2(CO)9 precursor to grow iron nanowires by FEBID in the thickness range from 10 to 45 nm and width range from 50 to 500 nm. These nanowires exhibit an Fe content between 80 and 85%, thus giving a high ferromagnetic signal. Magneto-optical Kerr characterization indicates that HC decreases for increasing thickness and width, providing a route to control the magnetization reversal field through the modification of the nanowire dimen- sions. Transmission electron microscopy experiments indicate that these wires have a bell-type shape with a surface oxide layer of about 5 nm. Such features are decisive in the actual value of HC as micromagnetic simulations demonstrate. These results will help to make appropriate designs of magnetic nanowires grown by FEBID.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Origin of inverse Rashba-Edelstein effect detected at the Cu/Bi interface using lateral spin valves

  • Isasa, M.
  • Martínez-Velarte, M.C.
  • Villamor, E.
  • Magén, C.
  • Morellón, L.
  • De Teresa, J.M.
  • Ibarra, M.R.
  • Vignale, G.
  • Chulkov, E.V.
  • Krasovskii, E.E.
  • Hueso, L.E.
  • Casanova, F.
The spin transport and spin-to-charge current conversion properties of bismuth are investigated using permalloy/copper/bismuth (Py/Cu/Bi) lateral spin valve structures. The spin current is strongly absorbed at the surface of Bi, leading to ultrashort spin-diffusion lengths. A spin-to-charge current conversion is measured, which is attributed to the inverse Rashba-Edelstein effect at the Cu/Bi interface. The spin-current-induced charge current is found to change direction with increasing temperature. A theoretical analysis relates this behavior to the complex spin structure and dispersion of the surface states at the Fermi energy. The understanding of this phenomenon opens novel possibilities to exploit spin-orbit coupling to create, manipulate, and detect spin currents in two-dimensional systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Characteristic length scale of the magnon accumulation in Fe3O4/Pt bilayer structures by incoherent thermal excitation

  • Anadon. A.
  • Ramos, R.
  • Lucas, I.
  • Algarabel, P. A.
  • Morellon, L.
  • Ibarra, M. R.
  • Aguirre, M. H.
The dependence of Spin Seebeck effect (SSE) with the thickness of the magnetic materials is studied by means of incoherent thermal excitation. The SSE voltage signal in Fe3O4/Pt bilayer structure increases with the magnetic material thickness up to 100¿nm, approximately, showing signs of saturation for larger thickness. This dependence is well described in terms of a spin current pumped in the platinum film by the magnon accumulation in the magnetic material. The spin current is generated by a gradient of temperature in the system and detected by the Pt top contact by means of inverse spin Hall effect. Calculations in the frame of the linear response theory adjust with a high degree of accuracy the experimental data, giving a thermal length scale of the magnon accumulation (¿) of 17¿±¿3¿nm at 300¿K and ¿¿=¿40¿±¿10¿nm at 70¿K.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Polar-Graded Multiferroic SrMnO3 Thin Films

  • Guzmán, Roger
  • Maurel, Laura
  • Langenberg, Eric
  • Lupini, Andrew R.
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Magén, César
Engineering defects and strains in oxides provides a promising route for the quest of thin film materials with coexisting ferroic orders, multiferroics, with efficient magnetoelectric coupling at room temperature. Precise control of the strain gradient would enable custom tailoring of the multiferroic properties but presently remains challenging. Here we explore the existence of a polar-graded state in epitaxially strained antiferromagnetic SrMnO3 thin films, whose polar nature was predicted theoretically and recently demonstrated experimentally. By means of aberration-corrected scanning transmission electron microscopy we map the polar rotation of the ferroelectric polarization with atomic resolution, both far from and near the domain walls, and find flexoelectricity resulting from vertical strain gradients. The origin of this particular strain state is a gradual distribution of oxygen vacancies across the film thickness, according to electron energy loss spectroscopy. Herein we present a chemistry-mediated route to induce polar rotations in oxygen-deficient multiferroic films, resulting in flexoelectric polar rotations and with potentially enhanced piezoelectricity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Temperature dependence of the spin Seebeck effect in [Fe3O4/Pt]n multilayers

  • Ramos, R.
  • Kikkawa, T.
  • Anadón, A.
  • Lucas, I.
  • Uchida, K.
  • Algarabel, P.A.
  • Morellón, L.
  • Aguirre, M.H.
  • Saitoh, E.
  • Ibarra, M.R.
We report temperature dependent measurements of the spin Seebeck effect (SSE) in multilayers formed by repeated growth of a Fe3O4/Pt bilayer junction. The magnitude of the observed enhancement of the SSE, relative to the SSE in the single bilayer, shows a monotonic increase with decreasing the temperature. This result can be understood by an increase of the characteristic length for spin current transport in the system, in qualitative agreement with the recently observed increase in the magnon diffusion length in Fe3O4 at lower temperatures. Our result suggests that the thermoelectric performance of the SSE in multilayer structures can be further improved by careful choice of materials with suitable spin transport properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin Seebeck effect in insulating epitaxial gamma-Fe2O3 thin films

  • Jiménez Cavero, P.
  • Lucas, I.
  • Anadón, A.
  • Ramos, R.
  • Niizeki, T.
  • Aguirre, M.H.
  • Algarabel, P.A.
  • Uchida, K.
  • Ibarra, M.R.
  • Saitoh, E.
  • Morellón, L.
We report the fabrication of high crystal quality epitaxial thin films of maghemite (¿-Fe2O3), a classic ferrimagnetic insulating iron oxide. Spin Seebeck effect (SSE) measurements in ¿-Fe2O3/Pt bilayers as a function of sample preparation conditions and temperature yield a SSE coefficient of 0.5(1) µV/K at room temperature. Dependence on temperature allows us to estimate the magnon diffusion length in maghemite to be in the range of tens of nanometers, in good agreement with that of conducting iron oxide magnetite (Fe3O4), establishing the relevance of spin currents of magnonic origin in magnetic iron oxides.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin-phonon coupling in epitaxial Sr0.6Ba0.4MnO3 thin films

  • Goian, V.
  • Langenberg, E.
  • Marcano, N.
  • Bovtun, V.
  • Maurel, L.
  • Kempa, M.
  • Prokscha, T.
  • Kroupa, J.
  • Algarabel, P.A.
  • Pardo, J.A.
  • Kamba, S.
Spin-phonon coupling is investigated in epitaxially strained Sr1-xBaxMnO3 thin films with perovskite structure by means of microwave (MW) and infrared (IR) spectroscopy. In this work we focus on the Sr0.6Ba0.4MnO3 composition grown on (LaAlO3)0.3(Sr2AlTaO6)0.7 substrate. The MW complex electromagnetic response shows a decrease in the real part and a clear anomaly in the imaginary part around 150 K. Moreover, it coincides with a 17% hardening of the lowest-frequency polar phonon seen in IR reflectance spectra. In order to further elucidate this phenomenon, low-energy muon-spin spectroscopy was carried out, signaling the emergence of antiferromagnetic order with Néel temperature (TN) around 150 K. Thus, our results confirm that epitaxial Sr0.6Ba0.4MnO3 thin films display strong spin-phonon coupling below TN, which may stimulate further research on tuning the magnetoelectric coupling by controlling the epitaxial strain and chemical pressure in the Sr1-xBaxMnO3 system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Competition between Superconductor-Ferromagnetic stray magnetic fields in YBa2Cu3O7-x films pierced with Co nano-rods

  • Rouco, V.
  • Córdoba, R.
  • De Teresa, J.M.
  • Rodríguez, L.A.
  • Navau, C.
  • Del-Valle, N.
  • Via, G.
  • Sánchez, A.
  • Monton, C.
  • Kronast, F.
  • Obradors, X.
  • Puig, T.
  • Palau, A.
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-Temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC)-ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-Trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structural and magnetic properties of [001] CoC r2 O4 thin films

  • Guzman, R.
  • Heuver, J.
  • Matzen, S.
  • Magén, C.
  • Noheda, B.
The spinel CoCr2O4 (CCO) is one of the few bulk multiferroics with net magnetic moment. However, studies on the properties of CCO thin films are scarce. Here, we investigate the interplay between microstructure and magnetism of a series of CCO epitaxial thin films by means of x-ray diffraction, magnetometry, and aberration-corrected scanning transmission electron microscopy (STEM). Optimum pristine CCO films can be grown on a substrate with spinel structure (MgAl2O4), despite the large lattice mismatch of ~3%. On the contrary, a substrate with lower lattice mismatch (~1%) but with the rock salt structure (MgO) favors the degradation of the CCO crystal quality by forming antiphase boundaries (APBs), drastically weakening the magnetization, in agreement with reports for other spinel films. Nevertheless, our results also show that the type and number of APBs can be tuned by changing the growth temperature to favor the ferromagnetic alignment between antiphase domains, giving rise to a partial recovery of the magnetization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Review of magnetic nanostructures grown by focused electron beam induced deposition (FEBID)

  • De Teresa, J. M.
  • Fernández-Pacheco, A.
  • Córdoba, R.
  • Serrano-Ramón, L.
  • Sangiao, S.
  • Ibarra, M. R.
We review the current status of the use of focused electron beam induced deposition (FEBID) for the growth of magnetic nanostructures. This technique relies on the local dissociation of a precursor gas by means of an electron beam. The most promising results have been obtained using the Co2(CO)8 precursor, where the Co content in the grown nanodeposited material can be tailored up to more than 95 at.%. Functional behaviour of these Co nanodeposits has been observed in applications such as arrays of magnetic dots for information storage and catalytic growth, magnetic tips for scanning probe microscopes, nano-Hall sensors for bead detection, nano-actuated magnetomechanical systems and nanowires for domain-wall manipulation. The review also covers interesting results observed in Fe-based and alloyed nanodeposits. Advantages and disadvantages of FEBID for the growth of magnetic nanostructures are discussed in the article as well as possible future directions in this field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

All-Carbon Electrode Molecular Electronic Devices Based on Langmuir–Blodgett Monolayers

  • Sangiao, S.
  • Martín, S.
  • González-Orive, A.
  • Magén, C.
  • Low, P.J.
  • De Teresa, J.M.
  • Cea, P.
Nascent molecular electronic devices, based on monolayer Langmuir–Blodgett films sandwiched between two carbonaceous electrodes, have been prepared. Tightly packed monolayers of 4-((4-((4-ethynylphenyl)ethynyl)phenyl)ethynyl)benzoic acid are deposited onto a highly oriented pyrolytic graphite electrode. An amorphous carbon top contact electrode is formed on top of the monolayer from a naphthalene precursor using the focused electron beam induced deposition technique. This allows the deposition of a carbon top-contact electrode with well-defined shape, thickness, and precise positioning on the film with nm resolution. These results represent a substantial step toward the realization of integrated molecular electronic devices based on monolayers and carbon electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thickness-modulated tungsten-carbon superconducting nanostructures grown by focused ion beam induced deposition for vortex pinning up to high magnetic fields

  • García Serrano, I.
  • Sese Monclús, Javier
  • Guillamon, I.
  • Suderow, H.
  • Vieira, S.
  • Ibarra, M.R.
  • De Teresa, J.M.
We report efficient vortex pinning in thickness-modulated tungsten–carbon-based (W–C) nanostructures grown by focused ion beam induced deposition (FIBID). By using FIBID, W–C superconducting films have been created with thickness modulation properties exhibiting periodicity from 60 to 140 nm, leading to a strong pinning potential for the vortex lattice. This produces local minima in the resistivity up to high magnetic fields (2.2 T) in a broad temperature range due to commensurability effects between the pinning potential and the vortex lattice. The results show that the combination of single-step FIBID fabrication of superconducting nanostructures with built-in artificial pinning landscapes and the small intrinsic random pinning potential of this material produces strong periodic pinning potentials, maximizing the opportunities for the investigation of fundamental aspects in vortex science under changing external stimuli (e.g., temperature, magnetic field, electrical current).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic properties of optimized cobalt nanospheres grown by focused electron beam induced deposition (FEBID) on cantilever tips

  • Sangiao, S.
  • Magén, C.
  • Mofakhami, D.
  • de Loubens, G.
  • De Teresa, J.M.
In this work, we present a detailed investigation of the magnetic properties of cobalt nanospheres grown on cantilever tips by focused electron beam induced deposition (FEBID). The cantilevers are extremely soft and the cobalt nanospheres are optimized for magnetic resonance force microscopy (MRFM) experiments, which implies that the cobalt nanospheres must be as small as possible while bearing high saturation magnetization. It was found that the cobalt content and the corresponding saturation magnetization of the nanospheres decrease for nanosphere diameters less than 300 nm. Electron holography measurements show the formation of a magnetic vortex state in remanence, which nicely agrees with magnetic hysteresis loops performed by local magnetometry showing negligible remanent magnetization. As investigated by local magnetometry, optimal behavior for high-resolution MRFM has been found for cobalt nanospheres with a diameter of ˜200 nm, which present atomic cobalt content of ˜83 atom % and saturation magnetization of 106 A/m, around 70% of the bulk value. These results represent the first comprehensive investigation of the magnetic properties of cobalt nanospheres grown by FEBID for application in MRFM.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning shape, composition and magnetization of 3D cobalt nanowires grown by focused electron beam induced deposition (FEBID)

  • Pablo-Navarro, J.
  • Sanz-Hernández, D.
  • Magén, C.
  • Fernández-Pacheco, A.
  • De Teresa, J.M.
Electron beam induced deposition of 3D cobalt nanowires with simultaneous high metallic content (˜80% at.) and small diameter (<100 nm) has been achieved by optimization of the growth parameters. Two different growth modes have been identified, denoted as radial and linear. In the radial mode, the wire diameter is at least ˜120 nm and the Co content is greater than ˜85% at. In the linear mode, the diameter is smaller than 80 nm and the Co content is at best ˜80% at. A sharp transition between both growth modes can occur inside a single nanowire for certain experimental conditions. Electron holography measurements indicate that in optimized Co nanowires the magnetic induction is high enough for applications in spintronics, magnetic sensing and actuation at the nanoscale.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemical solution synthesis and ferromagnetic resonance of epitaxial thin films of yttrium iron garnet

  • Lucas, I.
  • Jimenez-Cavero, P.
  • Vila-Fungueirino, J.M.
  • Magen, C.
  • Sangiao, S.
  • de Teresa, J.M.
  • Morellon, L.
  • Rivadulla, F.
We report the fabrication of epitaxial Y3Fe5O12 (YIG) thin films on Gd3Ga5O12 (111) using a chemical solution method. Cubic YIG is a ferrimagnetic material at room temperature, with excellent magneto-optical properties, high electrical resistivity, and a very narrow ferromagnetic resonance, which makes it particularly suitable for applications in filters and resonators at microwave frequencies. But these properties depend on the precise stoichiometry and distribution of Fe3+ ions among the octahedral/tetrahedral sites of a complex structure, which hampered the production of high-quality YIG thin films by affordable chemical methods. Here we report the chemical solution synthesis of YIG thin films, with excellent chemical, crystalline, and magnetic homogeneity. The films show a very narrow ferromagnetic resonance (long spin relaxation time), comparable to that obtained from high-vacuum physical deposition methods. These results demonstrate that chemical methods can compete to develop nanometer-thick YIG films with the quality required for spintronic devices and other high-frequency applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Functionalized Akiyama tips for magnetic force microscopy measurements

  • Stiller, M.
  • Barzola-Quiquia, J.
  • Esquinazi, P.D.
  • Sangiao, S.
  • De Teresa, J.M.
  • Meijer, J.
  • Abel, B.
In this work we have used focused electron beam induced deposition of cobalt to functionalize atomic force microscopy Akiyama tips for application in magnetic force microscopy. The grown tips have a content of ˜90 % Co after exposure to ambient air. The magnetic tips were characterized using energy dispersive x-ray spectroscopy and scanning electron microscopy. In order to investigate the magnetic properties, current loops were prepared by electron beam lithography. Measurements at room temperature as well as 4.2 K were carried out and the coercive field of ˜6.8 mT of the Co tip was estimated by applying several external fields in the opposite direction of the tip magnetization. Magnetic Akiyama tips open new possibilities for wide-range temperature magnetic force microscopy measurements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlling the Electrical and Magnetoelectric Properties of Epitaxially Strained Sr1- xBaxMnO3 Thin Films

  • Langenberg, E.
  • Maurel, L.
  • Marcano, N.
  • Guzmán, R.
  • Štrichovanec, P.
  • Prokscha, T.
  • Magén, C.
  • Algarabel, P.A.
  • Pardo, J.A.
The perovskite (Sr, Ba)MnO3 system is an ideal candidate for tailoring electrical and magnetoelectric properties through the accurate control of Ba content and epitaxial strain due to the strong coupling between polar instability, spin order, and lattice. Here, first, the polar order is proved to be induced in Sr1- xBaxMnO3 thin films through lattice expansion either by epitaxial strain or chemical pressure, which correlates with the evolution of the dielectric properties. Second, due to strong spin–phonon coupling, a large magnetoelectric response is found in the (Sr, Ba)MnO3 system, in which the dielectric constant drops up to 50% when the antiferromagnetic order emerges, larger than most magnetoelectric oxides. More important, this coupling between magnetism and dielectric properties can be tuned from ˜18% to ˜50% by appropriately selecting Ba content and epitaxial strain. Third, a clear trend of increasing the band gap energy on increasing the unit cell volume either by epitaxial strain or chemical pressure is found, which opens the way for engineering the semiconducting properties of (Sr, Ba)MnO3 system at will. Thus, this work proves the possibility to design the electrical response and the magnetoelectric coupling in (Sr, Ba)MnO3 system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Growth and structural characterization of strained epitaxial Hf0.5Zr0.5O2 thin films

  • Torrejón, Luis
  • Langenberg, Eric
  • Magén, César
  • Larrea, Ángel
  • Blasco, Javier
  • Santiso, José
  • Algarabel, Pedro A.
  • Pardo, José Ángel
Ferroelectricity was recently reported in thin films with several compositions in the HfO2-ZrO2 system with orthorhombic crystal structure. In the present paper we study the growth by pulsed laser deposition and the structural characterization of strained epitaxial Hf0.5 Zr0.5 O2 films on (001)-oriented yttria-stabilized zirconia (YSZ) substrates. We have determined the conditions for the coherent growth and correlated the deposition parameters with the films structure and microstructure studied through a combination of x-ray diffraction, electron backscatter diffraction, and scanning transmission electron microscopy. In the range of experimental parameters explored, all the films show monoclinic structure with distorted lattice parameters relative to bulk.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Vertical Growth of Superconducting Crystalline Hollow Nanowires by He+ Focused Ion Beam Induced Deposition

  • Córdoba, R.
  • Ibarra, A.
  • Mailly, D.
  • De Teresa, J.M.
Novel physical properties appear when the size of a superconductor is reduced to the nanoscale, in the range of its superconducting coherence length (¿0). Such nanosuperconductors are being investigated for potential applications in nanoelectronics and quantum computing. The design of three-dimensional nanosuperconductors allows one to conceive novel schemes for such applications. Here, we report for the first time the use of a He+ focused-ion-beam-microscope in combination with the W(CO)6 precursor to grow three-dimensional superconducting hollow nanowires as small as 32 nm in diameter and with an aspect ratio (length/diameter) of as much as 200. Such extreme resolution is achieved by using a small He+ beam spot of 1 nm for the growth of the nanowires. As shown by transmission electron microscopy, they display grains of large size fitting with face-centered cubic WC1-x phase. The nanowires, which are grown vertically to the substrate, are felled on the substrate by means of a nanomanipulator for their electrical characterization. They become superconducting at 6.4 K and show large critical magnetic field and critical current density resulting from their quasi-one-dimensional superconducting character. These results pave the way for future nanoelectronic devices based on three-dimensional nanosuperconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemical and structural analysis of sub-20 nm graphene patterns generated by scanning probe lithography

  • Dago, A.I.
  • Sangiao, S.
  • Fernández-Pacheco, R.
  • De Teresa, J.M.
  • Garcia, R.
Sub-20 nm patterns have been fabricated by using oxidation scanning probe lithography on epitaxial graphene. The structural and chemical properties of these nanopatterns have been characterized by high resolution transmission electron microscopy, energy dispersive X-ray spectroscopy and electron energy loss spectroscopy. The electron microscopy images reveal that the nanolithography process modifies the graphene monolayer and a thin region of the SiC substrate (1 nm thick). Spatially-resolved electron spectroscopies show that the nanopatterns are made of graphene oxide. The combination of spatially-resolved structural and chemical analysis of graphene nanopatterns will enable the development of high-performance graphene devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Transmission XMCD-PEEM imaging of an engineered vertical FEBID cobalt nanowire with a domain wall

  • Wartelle, A.
  • Pablo-Navarro, J.
  • Stano, M.
  • Bochmann, S.
  • Pairis, S.
  • Rioult, M.
  • Thirion, C.
  • Belkhou, R.
  • Teresa, J.M.D.
  • Magén, C.
  • Fruchart, O.
Using focused electron-beam-induced deposition, we fabricate a vertical, platinum-coated cobalt nanowire with a controlled three-dimensional structure. The latter is engineered to feature bends along the height: these are used as pinning sites for domain walls, which are obtained at remanence after saturation of the nanostructure in a horizontally applied magnetic field. The presence of domain walls is investigated using x-ray magnetic circular dichroism (XMCD) coupled to photoemission electron microscopy (PEEM). The vertical geometry of our sample combined with the low incidence of the x-ray beam produce an extended wire shadow which we use to recover the wire''s magnetic configuration. In this transmission configuration, the whole sample volume is probed, thus circumventing the limitation of PEEM to surfaces. This article reports on the first study of magnetic nanostructures standing perpendicular to the substrate with XMCD-PEEM. The use of this technique in shadow mode enabled us to confirm the presence of a domain wall without direct imaging of the nanowire.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

NanoSQUID Magnetometry on Individual As-grown and Annealed Co Nanowires at Variable Temperature

  • Martínez-Pérez, M.J.
  • Pablo-Navarro, J.
  • Müller, B.
  • Kleiner, R.
  • Magén, C.
  • Koelle, D.
  • De Teresa, J.M.
  • Sesé, J.
Performing magnetization studies on individual nanoparticles is a highly demanding task, especially when measurements need to be carried out under large sweeping magnetic fields or variable temperature. Yet, characterization under varying ambient conditions is paramount in order to fully understand the magnetic behavior of these objects, e.g., the formation of nonuniform states or the mechanisms leading to magnetization reversal and thermal stability. This, in turn, is necessary for the integration of magnetic nanoparticles and nanowires into useful devices, e.g., spin-valves, racetrack memories, or magnetic tip probes. Here, we show that nanosuperconducting quantum interference devices based on high critical temperature superconductors are particularly well suited for this task. We have successfully characterized a number of individual Co nanowires grown through focused electron beam induced deposition and subsequently annealed at different temperatures. Magnetization measurements performed under sweeping magnetic fields (up to 100 mT) and variable temperature (1.4-80 K) underscore the intrinsic structural and chemical differences between these nanowires. These point to significant changes in the crystalline structure and the resulting effective magnetic anisotropy of the nanowires, and to the nucleation and subsequent vanishing of antiferromagnetic species within the nanowires annealed at different temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Three-dimensional core-shell ferromagnetic nanowires grown by focused electron beam induced deposition

  • Pablo-Navarro, Javier
  • Magén, César
  • De Teresa, José María
Functional nanostructured materials often rely on the combination of more than one material to confer the desired functionality or an enhanced performance of the device. Here we report the procedure to create nanoscale heterostructured materials in the form of core-shell nanowires by focused electron beam induced deposition (FEBID) technologies. In our case, three-dimensional (3D) nanowires (<100 nm in diameter) with metallic ferromagnetic cores of Co- and Fe-FEBID have been grown and coated with a protective Pt-FEBID shell (ranging 10-20 nm in thickness) aimed to minimize the degradation of magnetic properties caused by the surface oxidation of the core to a non-ferromagnetic material. The structure, chemistry and magnetism of nanowire cores of Co and Fe have been characterized in Pt-coated and uncoated nanostructures to demonstrate that the morphology of the shell is conserved during Pt coating, the surface oxidation is suppressed or confined to the Pt layer, and the average magnetization of the core is strengthened up to 30%. The proposed approach paves the way to the fabrication of 3D FEBID nanostructures based on the smart alternate deposition of two or more materials combining different physical properties or added functionalities.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Purified and crystalline three-dimensional electron-beam-induced deposits: the successful case of cobalt for high-performance magnetic nanowires

  • Pablo-Navarro, Javier
  • Magén, César
  • De Teresa, José María
Focused-electron-beam-induced deposition (FEBID) is considered the ultimate direct-write lithography technique for three-dimensional (3D) structures. However, it has not yet been possible to obtain 3D deposits by FEBID with the same purity and crystallinity of the corresponding bulk materials. In the present work, purified and crystalline 3D Co nanowires of diameter below 90 nm have been fabricated by ex situ high-vacuum annealing at 600 °C after FEBID growth. With an increase of the metallic content of the nanowires up to 95 atom %, the thermal annealing process induces recrystallization of the pseudoamorphous as-grown structure into bulklike, hexagonal-closest-packed, and face-centered-cubic crystallites with lateral sizes comparable to the nanowire’s width. The net magnetization increases 80% with respect to the as-grown values, up to 1.61 ± 0.06 T, near bulk Co. This achievement opens new pathways for applications of this synthetic method in the fabrication of either individual or arrays of 3D high-purity and crystalline Co nanowires for high-density memory and logic devices, nanosensors, and actuators, and could be a viable method to obtain other pure and crystalline 3D materials by FEBID.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evidence of the spin Seebeck effect in Ni-Zn ferrites polycrystalline slabs

  • Arboleda, J.D.
  • Arnache, O.
  • Aguirre, M.H.
  • Ramos, R.
  • Anadón, A.
  • Ibarra, M.R.
We report on the observation of the spin Seebeck effect in Ni-Zn ferrites slabs with different Zn concentration. All samples have a spinel structure confirmed by XRD and TEM. We fully characterize the magnetic properties by VSM and Mössbauer spectroscopy. Samples exhibit a nonmonotonic magnetization behavior depending on the structural inversion parameter, however we found a spin Seebeck response voltage of about 25.5 nV/K independent of the magnetization and the inversion degree.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quantification of the interfacial and bulk contributions to the longitudinal spin Seebeck effect

  • Jiménez-Cavero, P.
  • Lucas, I.
  • Bugallo, D.
  • López-Bueno, C.
  • Ramos, R.
  • Algarabel, P.A.
  • Ibarra, M.R.
  • Rivadulla, F.
  • Morellón, L.
We report the disentanglement of bulk and interfacial contributions to the thermally excited magnon spin current in the spin Seebeck effect under static heating. For this purpose, we have studied the dependence of the inverse spin Hall voltage and the thermal conductivity on the magnetic layer thickness. Knowledge of these quantities allows us to take into account the influence of both sources of thermal spin current in the analysis of the voltage dependence. The magnetic layer thickness modulates the relative magnitude of the involved thermal drops for a fixed total thermal difference throughout the sample. In the end, we attain the separate contributions of both sources of thermal spin current - bulk and interfacial - and obtain the value of the thermal magnon accumulation length scale in maghemite, which we find to be 29(1) nm. According to our results, bulk magnon accumulation dominates the spin Seebeck effect in our studied range of thicknesses, but the interfacial component is by no means negligible.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Independent Control of the Magnetization in Ferromagnetic La2/3Sr1/3MnO3/SrTiO3/LaCoO3 Heterostructures Achieved by Epitaxial Lattice Mismatch

  • Rivas-Murias, B.
  • Lucas, I.
  • Jiménez-Cavero, P.
  • Magén, C.
  • Morellón, L.
  • Rivadulla, F.
We report the effect of interface symmetry-mismatch on the magnetic properties of LaCoO3 (LCO) thin films. Growing epitaxial LCO under tensile strain on top of cubic SrTiO3 (STO) produces a contraction along the c axis and a characteristic ferromagnetic response. However, we report here that ferromagnetism in LCO is completely suppressed when grown on top of a buffer layer of rhombohedral La2/3Sr1/3MnO3 (LSMO), in spite of identical in-plane and out-of-plane lattice deformation. This confirms that it is the lattice symmetry mismatch and not just the total strain, which determines the magnetism of LCO. On the basis of this control over the magnetic properties of LCO, we designed a multilayered structure to achieve independent rotation of the magnetization in ferromagnetic insulating LCO and half-metallic ferromagnet LSMO. This is an important step forward for the design of spin-filtering tunnel barriers based on LCO.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Epitaxial Stabilization of the Perovskite Phase in (Sr1–xBax)MnO3 Thin Films

  • Langenberg, Eric
  • Guzmán, Roger
  • Maurel, Laura
  • Martínez de Baños, Lourdes
  • Morellón, Luis
  • Ibarra, M. Ricardo
  • Herrero-Martín, Javier
  • Blasco, Javier
  • Magén, César
  • Algarabel, Pedro A.
  • Pardo, José A.
A novel mechanism of ferroelectricity driven by off-centering magnetic Mn4+ ions was proposed in (Sr1–xBax)MnO3, in its ideal perovskite phase, which yields enormous expectations in the search for strong magnetoelectric materials. Still, the desired perovskite phase has never been stabilized in thin films due to its extremely metastable character. Here, we report on a thorough study of the perovskite phase stabilization of (Sr1–xBax)MnO3 thin films, 0.2 ≤ x ≤ 0.5, grown by pulsed laser deposition onto (001)-oriented perovskite substrates. X-ray diffraction measurements and scanning transmission electron microscopy reveal that, under appropriate deposition conditions, the perovskite phase is fully stabilized over the nonferroelectric hexagonal phase, despite the latter being increasingly favored on increasing Ba-content. Moreover, we have managed to grow epitaxial coherent cube-on-cube (Sr1–xBax)MnO3 films upon strains ranging from 0% to 4%. Our results become a milestone in further studying perovskite (Sr1–xBax)MnO3 thin films and pave the way for tailoring ferroic and magnetoelectric properties either by strain engineering or Ba-doping.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Competition between superconductor, ferromagnetic stray magnetic fields in YBa2Cu3O7-x films pierced with Co nano-rods

  • Rouco Gómez, Víctor
  • Córdoba, R.
  • De Teresa, J. M.
  • Rodríguez, L. A.
  • Navau, Carles|||0000-0003-4763-5305
  • Valle, Nuria del|||0000-0003-2608-5009
  • Via, Guillem|||0000-0002-4789-1600
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Monton, Carlos
  • Kronast, F.
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Palau, Anna|||0000-0002-2217-164X
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC) - ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors.