Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 40
Encontrada(s) 1 página(s)

Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publicación Artículo científico (JournalArticle)

Stable antiferromagnetic nanocrystals for room temperature applications: The case of iron nitride

Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Surface composition changes of CuNi-ZrO2 catalysts during methane decomposition: An operando NAP-XPS and density functional study

  • Wolfbeisser, Astrid
  • Kovács, Gábor
  • Kozlov, Sergey
  • Föttinger, Karin
  • Bernardi, Johannes
  • Klötzer, Bernhard
  • Neyman, Konstantin M.
  • Rupprechter, Günther
Bimetallic CuNi nanoparticles of various nominal compositions (1:3, 1:1, 3:1) supported on ZrO2wereemployed for operando spectroscopy and theoretical studies of stable surface compositions under reac-tion conditions of catalytic methane decomposition up to 500◦C. The addition of Cu was intended toincrease the coke resistance of the catalyst. After synthesis and (in situ) reduction the CuNi nanoparticleswere characterized by HR-TEM/EDX, XRD, FTIR (using CO as probe molecule) and NAP-XPS, all indicatinga Cu rich surface, even when the overall nanoparticle composition was rich in Ni. Density functional (DF)theory modelling, applying a recently developed computational protocol based on the construction oftopological energy expressions, confirmed that in any studied composition Cu segregation on surfacepositions is an energetically favourable process, with Cu preferentially occupying corner and edge sites.Ni is present on terraces only when not enough Cu atoms are available to occupy all surface sites.When the catalysts were applied for methane decomposition they were inactive at low temperaturebut became active above 425◦C. Synchrotron-based operando NAP-XPS indicated segregation of Ni on thenanoparticle surface when reactivity set in for CuNi-ZrO2. Under these conditions C 1s core level spectrarevealed the presence of various carbonaceous species at the surface. DF calculations indicated that boththe increase in temperature and especially the adsorption of CHxgroups (x = 0-3) induce the segregationof Ni atoms on the surface, with CH3providing the lowest and C the highest driving force.Combined operando and theoretical studies clearly indicate that, independent of the initial surfacecomposition after synthesis and reduction, the CuNi-ZrO2catalyst adopts a specific Ni rich surface underreaction conditions. Based on these findings we provide an explanation why Cu rich bimetallic systemsshow improved coke resistance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-lived magnetism from solidification-driven convection on the pallasite parent body

  • Bryson, James F. J.
  • Herrero-Albillos, Julia
  • Kronast, Florian
  • Laan, Gerrit van der
  • Harrison, Richard J.
Letter.-- et al., Palaeomagnetic measurements of meteorites suggest that, shortly after the birth of the Solar System, the molten metallic cores of many small planetary bodies convected vigorously and were capable of generating magnetic fields. Convection on these bodies is currently thought to have been thermally driven, implying that magnetic activity would have been short-lived. Here we report a time-series palaeomagnetic record derived from nanomagnetic imaging10 of the Imilac and Esquel pallasite meteorites, a group of meteorites consisting of centimetre-sized metallic and silicate phases. We find a history of long-lived magnetic activity on the pallasite parent body, capturing the decay and eventual shutdown of the magnetic field as core solidification completed. We demonstrate that magnetic activity driven by progressive solidification of an inner core is consistent with our measured magnetic field characteristics and cooling rates. Solidification-driven convection was probably common among small body cores, and, in contrast to thermally driven convection, will have led to a relatively late (hundreds of millions of years after accretion), long-lasting, intense and widespread epoch of magnetic activity among these bodies in the early Solar System, The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP/2007-2013)/ERC grant agreement numbers 320750 and 312284, the Natural Environment Research Council, Fundación ARAID and the Spanish MINECO MAT2011-23791., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering the microstructure and magnetism of La2CoMnO6-δ thin films by tailoring oxygen stoichiometry

  • Galceran, Regina
  • Frontera, Carlos
  • Balcells, Lluis
  • Cisneros-Fernández, J.
  • López Mir, Laura
  • Roqueta, Jaume
  • Santiso, José
  • Bagués, Núria
  • Bozzo, Bernat
  • Pomar, Alberto
  • Sandiumenge, Felip
  • Martínez Perea, Benjamín
Under the terms of the Creative Commons Attribution (CC BY) license to their work., We report on the magnetic and structural properties of ferromagnetic-insulating La2CoMnO6-δ thin films grown on top of (001) SrTiO3 substrates by means of RF sputtering technique. Careful structural analysis, by using synchrotron X-ray diffraction, allows identifying two different crystallographic orientations that are closely related to oxygen stoichiometry and to the features (coercive fields and remanence) of the hysteresis loops. Both Curie temperature and magnetic hysteresis turn out to be dependent on the oxygen stoichiometry. In situ annealing conditions allow tailoring the oxygen content of the films, therefore controlling their microstructure and magnetic properties., We acknowledge financial support from the Spanish MEC (MAT2011-29081 and MAT2012-33207), CONSOLIDER (CSD2007-00041), and FEDER program. R.G., L.L.-M. and N.B. thank the Spanish MINECO for the financial support through the FPI program. The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under Grant Agreement No. 312284., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth kinetics engineered magnetoresistance response in La2/3Sr1/3MnO3 thin films

  • Pomar, Alberto
  • Santiso, José
  • Sandiumenge, Felip
  • Roqueta, Jaume
  • Bozzo, Bernat
  • Balcells, Lluis
  • Martínez Perea, Benjamín
  • Konstantinović, Z.
Under the terms of the Creative Commons Attribution (CC BY) license to their work., A route to engineer the intrinsic colossal magnetoresistance (CMR) response in manganite thin films through an accurate control of the growth kinetics is presented. It is shown that under specific growth conditions, a particular strained state, substantially different from that of bulk-like materials and standard films, can be quenched up to film thicknesses around 60 nm. This strained state exhibits the same structural fingerprints of the interfacial dead layer in standard films and promotes surface morphology instabilities, which end up with the formation of self-organized nanopits array. At the same time, it has profound effects on the intrinsic magnetoelectronic properties of the films that exhibit an enhanced intrinsic CMR response., We acknowledge financial support from the Spanish MEC (MAT2011-29081 and MAT2012-33207), CONSOLIDER (CSD2007-00041), and FEDER program. Z.K. thanks the Spanish MINECO for the financial support through the RyC program. We thank Helmholtz-Zentrum Berlin for the allocation of neutron/synchrotron radiation beamtime. The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under Grant Agreement No. 312284., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable band alignment with unperturbed carrier mobility of on-surface synthesized organic semiconducting wires

  • Vasseur, Guillaume
  • Vitali, Lucia
  • Lobo-Checa, Jorge
  • Oteyza, Dimas G. de
  • Sedona, Francesco
  • Ortega, J. Enrique
This is an open access article published under an ACS AuthorChoice License.-- et al., The tunable properties of molecular materials place them among the favorites for a variety of future generation devices. In addition, to maintain the current trend of miniaturization of those devices, a departure from the present top-down production methods may soon be required and self-assembly appears among the most promising alternatives. On-surface synthesis unites the promises of molecular materials and of self-assembly, with the sturdiness of covalently bonded structures: An ideal scenario for future applications. Following this idea, we report the synthesis of functional extended nanowires by self-assembly. In particular, the products correspond to one-dimensional organic semiconductors. The uniaxial alignment provided by our substrate templates allows us to access with exquisite detail their electronic properties, including the full valence band dispersion, by combining local probes with spatial averaging techniques. We show how, by selectively doping the molecular precursors, the product's energy level alignment can be tuned without compromising the charge carrier's mobility., This work was partially funded by MIUR (PRIN 2010/11, Project 2010BNZ3F2: “DESCARTES”), by EU project PAMS (Agreement No. 610446), by the European Research Council (ERC) under the EU Horizon 2020 research and innovation programme (Grant Agreement No. 635919), by the European Community’s Seventh Framework Programme (FP7/2007-2013) CALIPSO under Grant Agreement No. 312284, by the Spanish Ministry of Science and Competitiveness (MINECO, MAT2013-46593-C6-6-P and MAT2013-46593-C6-4-P) and FEDER, by the Basque Government (Grant Nos. IT-621-13 and IT-627-13)) and by the University of Padova (Grant CPDA154322, Project AMNES)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular-level realignment in donor-acceptor bilayer blends on metals

  • Borghetti, Patrizia
  • Oteyza, Dimas G. de
  • Rogero, Celia
  • Goiri, Elizabeth
  • Verdini, Alberto
  • Cossaro, Albano
  • Floreano, Luca
  • Ortega, J. Enrique
Molecular bilayers made up of a donor-acceptor blend in contact with the metal and capped with a single-component layer show a tunable energy level alignment at both metal-organic and organic-organic interfaces. To ensure sharp heteromolecular interfaces, a contact layer is formed by a stable blend of pentacene (PEN) and perfluorinated copper phthalocyanine (FCuPc) on Au(111) and Ag(111) and of perfluoropentacene (PFP) and copper phthalocyanine (CuPc) on Ag(111). Core-level and valence band photoemission reveal that, upon capping with pure FCuPc, CuPc, and PEN, the electronic states of both contact and capping layers >realign> with respect to the monolayer and the multilayer references. The sign of the shift depends clearly on whether the capping layer is donor-like (PEN, CuPc) or acceptor-like (FCuPc). As revealed by NEXAFS, the shift in electronic levels of the contact layer upon capping leads to a spectral density variation across the Fermi edge (E); i.e., it induces molecule/metal charge transfer., This work was supported by Spanish Grant No. MAT2013-46593-C6-4-P, the Basque Government grant IT-621-13 and the MIUR of Italy through PRIN project DESCARTES (no. 2010BNZ3F2). We acknowledge funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under Grant No. 226716 and under grant agreement No. 312284., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strong ferromagnetism at the surface of an antiferromagnet caused by buried magnetic moments

  • Chikina, Alla
  • Chulkov, Eugene V.
  • Koroteev, Yuri M.
  • Vyalikh, Denis V.
Carrying a large, pure spin magnetic moment of 7 μB per atom in the half-filled 4f shell, divalent europium is an outstanding element for assembling novel magnetic devices in which a two-dimensional electron gas may be polarized due to exchange interaction with an underlying magnetically-active Eu layer. Here we show that the Si-Rh-Si surface trilayer of the antiferromagnet EuRh2Si2 bears a surface state, which exhibits an unexpected and large spin splitting controllable by temperature. The splitting sets in below ~32.5 K, well above the ordering temperature of the Eu 4f moments (~24.5 K) in the bulk, indicating a larger ordering temperature in the topmost Eu layers. The driving force for the itinerant ferromagnetism at the surface is the aforementioned exchange interaction. Such a splitting may also be induced into states of functional surface layers deposited onto the surface of EuRh2Si2 or similarly ordered magnetic materials with metallic or semiconducting properties., This work was supported by the DFG (grant VY64/1-1, GE602/2-1, GRK1621). M.H. acknowledges financial support by the IMRS-AM. S.P. acknowledges financial assistance from the Alexander von Humboldt Foundation, Germany. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007–2013) under grant agreement N 312284 (CALIPSO)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Encoding Magnetic States in Monopole-Like Configurations Using Superconducting Dots

  • Palau, Anna
  • Obradors, Xavier
  • Puig Molina, Teresa
Palau Masoliver, Anna et al., A large manifold of nontrivial spin textures, including the stabilization of monopole-like fields, are generated by using a completely new and versatile approach based on the combination of superconductivity and magnetism. Robust, stable, and easily controllable complex spin structures are encoded, modified, and annihilated in a continuous magnetic thin film by defining a variety of magnetic states in superconducting dots., This work has been supported by MINECO (MAT2014-51778-C2-1R, MAT2012-35370, CSD2007-0041), Generalitat de Catalunya (2014- SGR-00753, 2014-SGR-150, 2014-PROD00059), European Seventh Framework Program (FP7/2007-2013) under grant agreement 312284, EU-NMP-LA-2012-280432EUROTAPES project and Cost Action MP1201. A. Sanchez acknowledges a grant from ICREA Academia, funded by the Generalitat de Catalunya. ICMAB acknowledge the Severo Ochoa Center of Excellence mentioned from MINECO. A. Palau and S. Valencia contributed equally to this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural basis of mitochondrial dysfunction in response to cytochrome c phosphorylation at tyrosine 48

  • Moreno-Beltrán, Blas
  • Guerra-Castellano, Alejandra
  • Díaz-Quintana, Antonio
  • Conte, Rebecca del
  • García-Mauriño, Sofía M.
  • Díaz-Moreno, Sofía
  • González-Arzola, Katiuska
  • Santos-Ocaña, Carlos
  • Velázquez-Campoy, Adrián
  • Rosa, Miguel A. de la
  • Turano, Paola
  • Díaz-Moreno, Irene
Regulation of mitochondrial activity allows cells to adapt to changing conditions and to control oxidative stress, and its dysfunction can lead to hypoxia-dependent pathologies such as ischemia and cancer. Although cytochrome c phosphorylation—in particular, at tyrosine 48—is a key modulator of mitochondrial signaling, its action and molecular basis remain unknown. Here we mimic phosphorylation of cytochrome c by replacing tyrosine 48 with p-carboxy-methyl-L-phenylalanine (pCMF). The NMR structure of the resulting mutant reveals significant conformational shifts and enhanced dynamics around pCMF that could explain changes observed in its functionality: The phosphomimetic mutation impairs cytochrome c diffusion between respiratory complexes, enhances hemeprotein peroxidase and reactive oxygen species scavenging activities, and hinders caspase-dependent apoptosis. Our findings provide a framework to further investigate the modulation of mitochondrial activity by phosphorylated cytochrome c and to develop novel therapeutic approaches based on its prosurvival effects., Financial support was provided by the Spanish Ministry of Economy and Competitiveness (Grants BFU2015-71017-P/BMC and BFU2015-19451/BMC, cofounded by FEDER EU), European Union (Bio-MR-00130 and CALIPSO-312284), Ramon Areces Foundation, and Andalusian Government (BIO198). B.M.-B. was awarded a PhD fellowship from the Spanish Ministry of Education (AP2009-4092) and a short-term traveling fellowship from the European Bio-NMR Project. A.G.-C. was awarded a PhD fellowship from the CSIC (JaePre-2011-01248)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Competition between Superconductor – Ferromagnetic stray magnetic fields in YBa2Cu3O7−x films pierced with Co nano-rods

  • Rouco, Víctor
  • Córdoba, Rosa
  • Teresa, José María de
  • Rodríguez, Luis A.
  • Navau, Carles
  • Del Valle, Nuria
  • Via, G.
  • Sánchez, A.
  • Monton, Carlos M.
  • Kronast, Florian
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Palau, Anna
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC) - ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors., This work has been supported by Spanish MINECO and FEDER (MAT2014-51778-C2-1R, CSD2007-0041, MAT2014-51982-C2-1-R and MAT2015-69725-REDT, MAT2016-79426-P), Severo Ochoa SEV2015-0496 program, Generalitat de Catalunya (2014-SGR-00753, 2014-SGR-150, 2014-PROD00059), Aragon regional government projects, including FEDER funding, European Seventh Framework Program (FP7/2007-2013) under grant agreement 312284, EU-NMP-LA-2012-280432 EUROTAPES project and Cost Actions MP1201 and CM1301 (CELINA). A. Sanchez acknowledges a grant from ICREA Academia, funded by the Generalitat de Catalunya. We are grateful to I. Rivas and R. Valero from LMA-INA (Zaragoza, Spain) for experimental help in the cobalt growth and Ar+ milling processes, and Dr C. Magén and Dr. P. Algarabel from LMA-INA (Zaragoza, Spain) for facilitating the use of their high performance computing server to perform the micromagnetic simulations. We acknowledge R. Morales from UPV/EHU and Ikerbasque, A. Fernández-Pacheco from U. Cambridge and S. Valencia from Helmholtz-Zentrum, Berlin for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An experimental and theoretical investigation into the electronically excited states of para-benzoquinone

  • Jones, D. B.
  • Limão-Vieira, P.
  • Mendes, Mónica
  • Jones, N.C.
  • Hoffmann, S.V.
  • Costa, Romarly F. da
  • Varella, M.T.D.N.
  • Bettega, Márcio H.F.
  • Blanco, F.
  • García, Gustavo
  • Ingólfsson, O.
  • Lima, M.A.P.
  • Brunger, M.J.
We report on a combination of experimental and theoretical investigations into the structure of electronically excited para-benzoquinone (pBQ). Here synchrotron photoabsorption measurements are reported over the 4.0-10.8 eV range. The higher resolution obtained reveals previously unresolved pBQ spectral features. Time-dependent density functional theory calculations are used to interpret the spectrum and resolve discrepancies relating to the interpretation of the Rydberg progressions. Electron-impact energy loss experiments are also reported. These are combined with elastic electron scattering cross section calculations performed within the framework of the independent atom model-screening corrected additivity rule plus interference (IAM-SCAR + I) method to derive differential cross sections for electronic excitation of key spectral bands. A generalized oscillator strength analysis is also performed, with the obtained results demonstrating that a cohesive and reliable quantum chemical structure and cross section framework has been established. Within this context, we also discuss some issues associated with the development of a minimal orbital basis for the single configuration interaction strategy to be used for our high-level low-energy electron scattering calculations that will be carried out as a subsequent step in this joint experimental and theoretical investigation., M.M. acknowledges the Portuguese National Funding Agency FCT-MCTES through PD/BD/106038/2015 and together with PLV the research Grant No. UID/FIS/00068/ 2013. This work was also supported by Radiation Biology and Biophysics Doctoral Training Programme (RaBBiT, PD/00193/2010); UID/Multi/04378/2013 (UCIBIO). G.G. acknowledges partial financial support from the Spanish Ministerio de Economia, Industria y Competitividad (Project No. FIS2016-8440), and the EU Project No. FP7-ITN-ARGENT- 608163. The authors wish to acknowledge the beam time at the ASTRID2 synchrotron at ISA, Aarhus University, Denmark. We also acknowledge the financial support provided by the European Community’s Seventh Framework Programme (FP7/2007-2013) CALIPSO under Grant Agreement No. 312284. M.J.B. acknowledges the Australian Research Council for some financial support. M.T.N.V. and M.A.P.L. acknowledge financial support from FAPESP, while R.F.C., M.T.N.V., M.H.F.B., and M.A.P.L. acknowledge financial support from CNPq, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comprehensive investigation of the electronic excitation of W(CO)6 by photoabsorption and theoretical analysis in the energy region from 3.9 to 10.8 eV

  • Mendes, Mónica
  • Regeta, K.
  • Silva, F.F. da
  • Jones, N.C.
  • Hoffmann, S.V.
  • García, Gustavo
  • Daniel, C.
  • Limão-Vieira, P.
High-resolution vacuum ultraviolet photoabsorption measurements in the wavelength range of 115-320 nm (10.8-3.9 eV) have been performed together with comprehensive relativistic time-dependent density functional calculations (TDDFT) on the low-lying excited sates of tungsten hexacarbonyl, W(CO). The higher resolution obtained reveals previously unresolved spectral features of W(CO). The spectrum shows two higher-energy bands (in the energy ranges of 7.22-8.12 eV and 8.15-9.05 eV), one of them with clear vibrational structure, and a few lower-energy shoulders in addition to a couple of lower-energy metal-to-ligand charge-transfer (MLCT) bands reported in the literature before. Absolute photoabsorption cross sections are reported and, where possible, compared to previously published results. On the basis of this combined experimental/theoretical study the absorption spectrum of the complex has been totally re-assigned between 3.9 and 10.8 eV under the light of spin-orbit coupling (SOC) effects. The present comprehensive knowledge of the nature of the electronically excited states may be of relevance to estimate neutral dissociation cross sections of W(CO), a precursor molecule in focused electron beam induced deposition (FEBID) processes, from electron scattering measurements., MM and FFS acknowledge the Portuguese National Funding Agency FCT-MCTES through grants PD/BD/106038/2015 and researcher position IF-FCT IF/00380/2014, respectively, and together with PLV the research grant UID/FIS/00068/2013. KR acknowledges the Swiss National Science Foundation for an Early Postdoc Mobility fellowship. This work was also supported by Radiation Biology and Biophysics Doctoral Training Programme (RaBBiT, PD/00193/2012); UID/Multi/ 04378/ 2013 (UCIBIO). GG acknowledges partial financial support from the Spanish Ministerio de Economia, Industria y Competitividad (Project No. FIS2016-80440). CD thanks The Labex “Chimie des Systèmes Complexes” (ANR-10-LABX- 0026_CSC). The quantum chemical calculations have been performed on the computer nodes of the LCQS, Strasbourg and thanks to the computer facilities of the High Performance Computing (HPC) regional center of University of Strasbourg. The authors wish to acknowledge the beam time at the ASTRID2 synchrotron at ISA, Aarhus University, Denmark. We also acknowledge the financial support provided by the European Community's Seventh Framework Programme (FP7/ 2007-2013) CALIPSO under grant agreement number 312284. Some of this work forms part of the EU/ESF COST Action CELINA CM1301, Peer Reviewed, 11 pags., 4 figs., 2 tabs. -- This article is part of the Thematic Series "Chemistry for electron-induced nanofabrication".
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biochemical profiling of rat embryonic stem cells grown on electrospun polyester fibers using synchrotron infrared microspectroscopy

  • Doncel-Pérez, Ernesto
  • Ellis, Gary James
  • Sandt, Christophe
  • Shuttleworth, Peter S.
  • Bastida, Agatha
  • Revuelta, Julia
  • García-Junceda, Eduardo
  • Fernández-Mayoralas, Alfonso
  • Garrido, Leoncio
Therapeutic options for spinal cord injuries are severely limited; current treatments only offer symptomatic relief and rehabilitation focused on educating the individual on how to adapt to their new situation to make best possible use of their remaining function. Thus, new approaches are needed, and interest in the development of effective strategies to promote the repair of neural tracts in the central nervous system inspired us to prepare functional and highly anisotropic polymer scaffolds. In this work, an initial assessment of the behavior of rat neural progenitor cells (NPCs) seeded on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) fiber scaffolds using synchrotron-based infrared microspectroscopy (SIRMS) is described. Combined with a modified touch imprint cytology sample preparation method, this application of SIRMS enabled the biochemical profiles of NPCs on the coated polymer fibers to be determined. The results showed that changes in the lipid and amide I–II spectral regions are modulated by the type and coating of the substrate used and the culture time. SIRMS studies can provide valuable insight into the early-stage response of NPCs to the morphology and surface chemistry of a biomaterial, and could therefore be a useful tool in the preparation and optimization of cellular scaffolds., Financial support was provided by theMinisterio de Economía y Competitividad (MINECO), projects FIS/ISCIII PI11/01436 and PI11/00592, MAT2015-65184-C2-2-R, and the CSIC. The research leading to these results was funded by the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 312284 (CALIPSO). Synchrotron measurements were performed at the SMIS beamline of Synchrotron SOLEIL. PS is grateful to MINECO for Ramón y Cajal postdoctoral fellowships (RYC-2014-16759). We would like to thank all the beamline staff for their helpful support and advice., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nutriosomes: Prebiotic delivery systems combining phospholipids, a soluble dextrin and curcumin to counteract intestinal oxidative stress and inflammation

  • Catalán-Latorre, Ana
  • Pons Pons, Ramon
  • Manconi, Maria
Nutriosomes, new phospholipid nanovesicles specifically designed for intestinal protection were developed by simultaneously loading a water-soluble dextrin (Nutriose® FM06) and a natural antioxidant (curcumin). Nutriosomes were easily fabricated in a one-step, organic solvent-free procedure. The stability and delivery performances of the vesicles were improved by adding hydroxypropyl methylcellulose. All the vesicles were small in size (mean diameter ∼168 nm), negatively charged (zeta potential ∼-38 mV, irrespective of their composition), and self-assembled predominantly in unilamellar vesicles stabilized by the presence of Nutriose®, which was located in both the inter-lamellar and inter-vesicle media, as confirmed by cryo-TEM and SAXS investigation. The dextrin acted also as a cryo-protector, avoiding vesicle collapse during the lyophilization process, and as a protector against high ionic strength and pH changes encountered in the gastrointestinal environment. Thanks to the antioxidant properties of curcumin, nutriosomes provided an optimal protective effect against hydrogen peroxide-induced oxidative stress in Caco-2 cells. Moreover, these innovative vesicles showed promising efficacy in vivo, as they improved the bioavailability and the biodistribution of both curcumin and dextrin upon oral administration, which acted synergically in reducing colonic damage chemically induced in rats. © The Royal Society of Chemistry 2018., SAXS experiments were performed at the BL11-NCD beamline of the ALBA Synchrotron facility with the collaboration of ALBA staff. The beam-time at ALBA was kindly provided within the approved proposal no. 2013110789. The research leading to these results has received funding from the European Community’s Seventh Framework Program (FP7/2007-2013) under the grant agreement no. 312284., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paleomagnetic evidence for dynamo activity driven by inward crystallisation of a metallic asteroid

  • Bryson, James F. J.
  • Weiss, Benjamin P.
  • Harrison, Richard J.
  • Herrero-Albillos, Julia
  • Kronast, Florian
The direction in which a planetary core solidifies has fundamental implications for the feasibility and nature of dynamo generation. Although Earth's core is outwardly solidifying, the cores of certain smaller planetary bodies have been proposed to inwardly solidify due to their lower central pressures. However, there have been no unambiguous observations of inwardly solidified cores or the relationship between this solidification regime and planetary magnetic activity. To address this gap, we present the results of complimentary paleomagnetic techniques applied to the matrix metal and silicate inclusions within the IVA iron meteorites. This family of meteorites has been suggested to originate from a planetary core that had its overlaying silicate mantle removed by collisions during the early solar system. This process is thought to have produced a molten ball of metal that cooled rapidly and has been proposed to have inwardly solidified. Recent thermal evolution models of such a body predict that it should have generated an intense, multipolar and time-varying dynamo field. This field could have been recorded as a remanent magnetisation in the outer, cool layers of a solid crust on the IVA parent core. We find that the different components in the IVA iron meteorites display a range of paleomagnetic fidelities, depending crucially on the cooling rate of the meteorite. In particular, silicate inclusions in the quickly cooled São João Nepomuceno meteorite are poor paleomagnetic recorders. On the other hand, the matrix metal and some silicate subsamples from the relatively slowly cooled Steinbach meteorite are far better paleomagnetic recorders and provide evidence of an intense (≳100 μT) and directionally varying (exhibiting significant changes on a timescale ≲200 kyr) magnetic field. This is the first demonstration that some iron meteorites record ancient planetary magnetic fields. Furthermore, the observed field intensity, temporal variability and dynamo lifetime are consistent with thermal evolution models of the IVA parent core. Because the acquisition of remanent magnetisation by some IVA iron meteorites require that they cooled below their Curie temperature during the period of dynamo activity, the magnetisation carried by Steinbach also provides strong evidence favouring the inward solidification of its parent core., We acknowledge the Helmholtz-Zentrum Berlin for the use of the synchrotron radiation beamtime at beamline UE49 of BESSY II. The research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Programme (FP/2007–2013)/ERC grant agreement numbers 320750 and 312284. BPW and JFJB thank the NASA Solar System Exploration Research Virtual Institute (SSERVI), the NASA Solar System Workings Program (grant # NNX15AL62G) and Thomas F. Peterson for support. JFJB thanks the Natural Environment Research Council for financial support. J.H.-A. thanks the MAT2014-53921-RMINECO project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural dynamics during laser-induced ultrafast demagnetization

  • Jal, Emmanuelle
  • López-Flores, Víctor
  • Pontius, Niko
  • Ferté, Tom
  • Bergeard, Nicolas
  • Boeglin, Christine
  • Vodungbo, Boris
  • Lüning, Jan
  • Jaouen, Nicolas
The mechanism underlying femtosecond laser-pulse-induced ultrafast magnetization dynamics remains elusive, despite two decades of intense research on this phenomenon. Most experiments focused so far on characterizing magnetization and charge carrier dynamics, while the first direct measurements of structural dynamics during ultrafast demagnetization were reported only very recently. We here present our investigation of the infrared laser-pulse-induced ultrafast demagnetization process in a thin Ni film, which characterizes simultaneously magnetization and structural dynamics. This is achieved by employing femtosecond time-resolved x-ray resonant magnetic reflectivity (tr-XRMR) as the probe technique. The experimental results reveal unambiguously that the subpicosecond magnetization quenching is accompanied by strong changes in nonmagnetic x-ray reflectivity. These changes vary with reflection angle, and changes up to 30% have been observed. By modeling the x-ray reflectivity of the investigated thin film, we can reproduce these changes by a variation of the apparent Ni layer thickness of up to 1%. Extending these simulations to larger incidence angles, we show that tr-XRMR can be employed to discriminate experimentally between currently discussed models describing the ultrafast demagnetization phenomenon., Funding from the European Community's Seventh Framework Programme under Grant Agreement No. 312284 (CALIPSO Project) is gratefully acknowledged, as well as financial support received from the following agencies: (i) The French “Agence National de la Recherche” (ANR) via the projects UMAMI, ANR-11-LABX-0058_NIE and the EQUIPEX UNION (ANR-10-EQPX-52), and (ii) the CNRS-PICS program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystalline characteristics and their influence in the mechanical performance in poly(ε-Caprolactone) / high density polyethylene blends

  • Blázquez-Blázquez, Enrique
  • Pérez, Ernesto
  • Lorenzo, Vicente
  • Cerrada, María L.
Blends of poly(ε-caprolactone) (PCL) and high-density polyethylene (HDPE) have been prepared at different compositions in order to assess the effect of HDPE on gas transport and mechanical behaviors of PCL. Previous to this evaluation, a complete morphological, structural, and thermal characterization were performed using techniques, including SEM, contact angle, FTIR, differential scanning calorimetry, and X-ray diffraction with synchrotron radiation at small and wide angles. Low HDPE incorporations allow interactions to be established at interfaces in the amorphous regions and the enhancement of the mechanical performance. Consequently, the addition of a small amount of HDPE (ranging from 5 to 10 wt%) appears to be appropriate in certain bio-applications where a higher mechanical behavior is required., This research was funded by the Agencia Estatal de Investigación (AEI, Spain) and by the European Regional Development Fund (FEDER, UE) through the project with grant number MAT2016-79869-C2-1-P. It was also funded by the Seventh Framework Programme (FP7/2007–2013) of the European Community for the synchrotron experiments (grant agreement n° 312284)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards microscopic control of the magnetic exchange coupling at the surface of a topological insulator

  • Rüßmann, Philipp
  • Mahatha, Sanjoy K.
  • Sessi, Paolo
  • Valbuena, Miguel A.
  • Bathon, Thomas
  • Fauth, Kai
  • Godey, Sylvie
  • Mugarza, Aitor
  • Kokh, Konstantin A.
  • Tereshchenko, Oleg E.
  • Gargiani, Pierluigi
  • Valvidares, Manuel
  • Jiménez, Erika
  • Brookes, Nicholas B.
  • Bode, Matthias
  • Bihlmayer, Gustav
  • Blügel, Stefan
  • Mavropoulos, Phivos
  • Carbone, Carlo
  • Barla, Alessandro
Magnetically doped topological insulators may produce novel states of electronic matter, where for instance the quantum anomalous Hall effect state can be realized. Pivotal to this goal is a microscopic control over the magnetic state, defined by the local electronic structure of the dopants and their interactions. We report on the magnetic coupling among Mn or Co atoms adsorbed on the surface of the topological insulator Bi2Te3. Our findings uncover the mechanisms of the exchange coupling between magnetic atoms coupled to the topological surface state in strong topological insulators. The combination of x-ray magnetic circular dichroism and ab initio calculations reveals that the sign of the magnetic coupling at short adatom–adatom distances is opposite for Mn with respect to Co. For both elements, the magnetic exchange reverses its sign at a critical distance between magnetic adatoms, as a result of the interplay between superexchange, double exchange and Ruderman–Kittel–Kasuya–Yoshida interactions., PR, PM, SB, PS and MB acknowledge funding from the Priority Programme SPP-1666 Topological Insulators of the Deutsche Forschungsgemeinschaft (DFG) (projects MA4637/3-1 and BI832/2) and from the VITI Programme of the Helmholtz Association, as well as computational time at the Supercomputing Centre of the RWTH Aachen University. AB and CC acknowledge funding from MIUR (Progetto Premiale Materiali e disposivi magnetici e superconduttivi per sensoristica e ICT). MB was supported by DFG through SFB 1170 ToCoTronics (project A02). OET and KAK have been supported by the Russian Science Foundation (project No.17-12-01047). MAV, SG and AM acknowledge funding from the CERCA Programme/Generalitat de Catalunya and the Spanish Ministry of Economy and Competitiveness, MINECO (contract No. MAT2016-78293-C6-2-R and Severo Ochoa No. SEV-2013-0295). Part of the research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement No. 312284., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diffusion pathways of Fe2+ and Fe3+ during the formation of ferrian chromite: a µXANES study

  • Gervilla, Fernando
  • Asta, M. P.
  • Fanlo, I.
  • Grolimund, D.
  • Ferreira-Sánchez, D.
  • Samson, V. A.
  • Hunziker, D.
  • Colas, V.
  • González-Jiménez, José María
  • Kerestedjian, T. N
  • Sergeeva, I.
The alteration of chromian spinel is a key process during serpentinization and metamorphism of ultramafic rocks controlled by oxygen fugacity (fO) and Fe ↔ Fe exchange during fluid–rock interaction. Chromian spinel alteration is better recorded in less permeable chromitite than in peridotites where extensive fluid–rock interaction frequently overprints the record of earlier stages of alteration. To shed light on that process we have studied the distribution of Fe and Fe in variably altered chromian spinel grains from a set of chromitite samples from the same mining district using synchrotron-based microscopic chemical imaging and spatially resolved X-ray absorption near edge structure spectroscopy. Our results show that early stages of alteration do not involve changes in Cr and Fe contents or in Fe speciation but only depletion in Al and Mg resulting in the formation of porous chromite. With ongoing alteration Fe migrates into porous chromite mainly along fracture walls and fracture zones as well as along grain boundaries. Sheared-type chromitites record the maximum rates of fluid–rock interaction because in these chromitite-types the accommodation of deformation on porous chromite allowed higher rates of diffusion of Fe and Fe (a magnetite component with Fe/Fe = 0.66) into the newly formed neoblasts. In porous chromite-type texture (all the original chromite grains fully transformed to porous chromite) the deformation and accompanying diffusion processes result in the formation of homogenous ferrian chromite grains. In contrast, in partly altered-type texture (chromite grains with original cores surrounded by porous chromite), such processes are only restricted to the porous rims, giving rise to zoned chromian spinel-ferrian chromite grains., The authors acknowledge the Paul Scherrer Institut, Villigen, Switzerland for provision of synchroton radiation beamtime (proposals 20131062 and 20141107) at beamline microXAS (X05LA) of the SLS. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under Grant agreement no. 312284 (CALIPSO) and from Spanish ministerio de Ciencia, Innovación y Universidades (project RTI2018-099157-A-I00). Maria P. Asta has received financial support from the European Comission through the Marie Skłodowska-Curie Research Fellowship Programme. J. M. González-Jiménez thanks the support of a Ramón y Cajal Fellowship (RYC-2015-17596) granted by the Spanish “Ministerio de Economía y Competitividad (MINECO)”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Variations in the magnetic properties of meteoritic cloudy zone

  • Nichols, Claire I.O.
  • Bryson, James F. J.
  • Blukis, Roberts
  • Herrero-Albillos, Julia
  • Kronast, Florian
  • Rüffer, Rudolf
  • Chumakov, Aleksandr I.
  • Harrison, Richard J.
Iron and stony‐iron meteorites form the Widmanstätten pattern during slow cooling. This pattern is composed of several microstructures whose length‐scale, composition and magnetic properties are dependent upon cooling rate. Here we focus on the cloudy zone: a region containing nanoscale tetrataenite islands with exceptional paleomagnetic recording properties. We present a systematic review of how cloudy zone properties vary with cooling rate and proximity to the adjacent tetrataenite rim. X‐ray photoemission electron microscopy is used to compare compositional and magnetization maps of the cloudy zone in the mesosiderites (slow cooling rates), the IAB iron meteorites and the pallasites (intermediate cooling rates), and the IVA iron meteorites (fast cooling rates). The proportions of magnetic phases within the cloudy zone are also characterized using Mössbauer spectroscopy. We present the first observations of the magnetic state of the cloudy zone in the mesosiderites, showing that, for such slow cooling rates, tetrataenite islands grow larger than the multidomain threshold, creating large‐scale regions of uniform magnetization across the cloudy zone that render it unsuitable for paleomagnetic analysis. For the most rapidly cooled IVA meteorites, the time available for Fe‐Ni ordering is insufficient to allow tetrataenite formation, again leading to behavior that is unsuitable for paleomagnetic analysis. The most reliable paleomagnetic remanence is recorded by meteorites with intermediate cooling rates ( urn:x-wiley:ggge:media:ggge22125:ggge22125-math-0001 2–500 °C Myr urn:x-wiley:ggge:media:ggge22125:ggge22125-math-0002) which produces islands that are “just right” in both size and degree of Fe‐Ni order., This work was supported by the European Research Council under the European Union's Seventh Framework Programme (FP/2007‐2013)/ ERC grant agreement numbers 320750 and 312284., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomically precise semiconductor-graphene and hBN interfaces by Ge intercalation

  • Verbitskiy, I. I.
  • Fedorov, Alexander
  • Profeta, G.
  • Stroppa, A.
  • Petaccia, Luca
  • Senkovskiy, Boris V.
  • Nefedov, A.
  • Wöll, C.
  • Usachov, Dmitry Yu.
  • Vyalikh, Denis V.
  • Yashina, Lada V.
  • Eliseev, A. A.
  • Pichler, Thomas
  • Grüneis, Alexander
The full exploration of the potential, which graphene offers to nanoelectronics requires its integration into semiconductor technology. So far the real-world applications are limited by the ability to concomitantly achieve large single-crystalline domains on dielectrics and semiconductors and to tailor the interfaces between them. Here we show a new direct bottom-up method for the fabrication of high-quality atomically precise interfaces between 2D materials, like graphene and hexagonal boron nitride (hBN) and classical semiconductor via Ge intercalation. Using angle-resolved photoemission spectroscopy and complementary DFT modelling we observed for the first time that epitaxially grown graphene with the Ge monolayer underneath demonstrates Dirac Fermions unaffected by the substrate as well as an unperturbed electronic band structure of hBN. This approach provides the intrinsic relativistic 2D electron gas towards integration in semiconductor technology. Hence, these new interfaces are a promising path for the integration of graphene and hBN into state-of-the-art semiconductor technology., A.G. acknowledges the ERC Consolidator grant ‘SUPER-2D’ (grant agreement 648589) and funding from QM2 (Quantum Matter and Materials). N.I.V. and T.P. acknowledge Austrian Science Fund (FWF): projects No. I 377-N16 “Theory and Spectroscopy on functionalized Graphene” and No. P27769-N20 “Electron and Spin Correlation in Nano Carbon-Metal Hybrids”. A.G. and N.I.V. acknowledge funding from the 2EU MCA-IRSES project 612577 NanoCF. N.I.V. and A.A.E. acknowledge the Russian Science Foundation (No. 14-13-00747). G.P. acknowledges the FP7 European project SUPER-IRON (grant agreement No. 283204) and the Italian Ministry of University Research through the PRIN 2012 project. Computational resources were provided by CINECA award under the ISCRA initiative. D.Yu.U., A.V.F. and B.S. acknowledge RFBR (grant No. 14-02-31150). D.Yu.U., A.V.F. and D.V.V. acknowledge Saint Petersburg State University (grants No. 11.37.634.2013 and No. 15.61.202.2015). This work was partially supported by KIT Research Program Science and Technology of Nanosystems. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007–2013) under grant agreement CALIPSO (n.312284)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Decacyclene trianhydride at functional interfaces: An ideal electron acceptor material for organic electronics

  • Oteyza, Dimas G. de
  • García-Lastra, J. M.
  • Toma, Francesca M.
  • Borghetti, Patrizia
  • Floreano, Luca
  • Verdini, Alberto
  • Cossaro, Albano
  • Pho, Toan V.
  • Wudl, Fred
  • Ortega, J. Enrique
We report the interface energetics of decacyclene trianhydride (DTA) monolayers on top of two distinct model surfaces, namely, Au(111) and Ag(111). On the latter, combined valence band photoemission and X-ray absorption measurements that access the occupied and unoccupied molecular orbitals, respectively, reveal that electron transfer from substrate to surface sets in. Density functional theory calculations confirm our experimental findings and provide an understanding not only of the photoemission and X-ray absorption spectral features of this promising organic semiconductor but also of the fingerprints associated with the interface charge transfer., This work was supported by the Spanish Grants No. MAT2013-46593-C6-4-P, and the Basque Government Grant No. IT-621-13. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 312284. J.M.G.L. acknowledges support from the Spanish Ministry of Economy and Competitiveness under Projects FIS2012-30996 and FIS2013-46159-C3-1-P and from the Villum Foundation’s Young Investigator Programme (fourth round, project: In silico design of efficient materials for next generation batteries. Grant number: 10096) F.M.T. acknowledges financial support from the Area Science Park of Trieste and EU (TALENTS Fellowship Programme, PCOFUND-GA-2009-245574). F.M.T. and F.W. thank the Center for Energy Efficient Materials, an Energy Frontier Research Center funded by the U.S. Department of Energy under award number DE-SC0001009 for the DTA synthesis and characterizations. T.V.P. and F.W. acknowledge the ConvEne IGERT Program (NSF-DGE0801627) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A time-resolved paleomagnetic record of main group pallasites: evidence for a large-cored, thin-mantled parent body

  • Nichols, Claire I.O.
  • Bryson, James F. J.
  • Cottrell, Rory D.
  • Fu, Roger R.
  • Harrison, Richard J.
  • Herrero-Albillos, Julia
  • Kronast, Florian
  • Tarduno, John A.
  • Weiss, Benjamin P.
Several paleomagnetic studies have been conducted on five Main Group pallasites: Brenham, Marjalahti, Springwater, Imilac, and Esquel. These pallasites have distinct cooling histories, meaning that their paleomagnetic records may have been acquired at different times during the thermal evolution of their parent body. Here, we compile new and existing data to present the most complete time-resolved paleomagnetic record for a planetesimal, which includes a period of quiescence prior to core solidification as well as dynamo activity generated by compositional convection during core solidification. We present new paleomagnetic data for the Springwater pallasite, which constrains the timing of core solidification. Our results suggest that in order to generate the observed strong paleointensities (∼65–95 μT), the pallasites must have been relatively close to the dynamo source. Our thermal and dynamo models predict that the Main Group pallasites originate from a planetesimal with a large core (>200 km) and a thin mantle (<70 km)., This work was supported by the European Research Council under the European Union's Seventh Framework Programme (FP/2007–2013)/ERC grant agreement numbers 320750 and 312284. We acknowledge the Helmholtz-Zentrum Berlin for the use of the synchrotron radiation beam time at beamline UE49 of BESSY II. We thank the Natural History Museum, London, the American Museum of Natural History, and the Harvard Museum of Natural History for loan of samples. CION thanks the Simons Foundation (award #556352), The Geological Society, the Mineralogical Society of Great Britain, the Mineral Physics Group of Great Britain, Jesus College Cambridge, and the Royal Astronomical Society for funding. BPW thanks the NASA Solar System Workings program and T.F. Peterson, Jr. for support. JH-A thanks the Spanish MCINN Project (DWARFS MAT2017-83468-R). Work at the University of Rochester was supported by NSF grant EAR1656348 and NASA grant 80NSSC19K0510., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling structural and magnetic information during growth of nanocrystalline SrFe12O19

  • Granados-Miralles, Cecilia
  • Saura-Múzquiz, Matilde
  • Bøjesen, Espen D.
  • Jensen, Kirsten M. Ø.
  • Andersen, Henrik L.
  • Christensen, Mogens
[EN] The hydrothermal synthesis of magnetic strontium hexaferrite (SrFe12O19) nanocrystallites was followed in situ using synchrotron powder X-ray diffraction. For all the studied temperatures, the formation of SrFe12O19 happened through an intermediate crystalline phase, identified as the so-called six-line ferrihydrite (FeOOH). The presence of FeOOH has been overlooked in previous studies on hydrothermally synthesized SrFe12O19, despite the phase having a non-trivial influence on the magnetic properties of the final material. The chemical synthesis was successfully reproduced ex situ in a custom-designed batch-type reactor that resembles the experimental conditions of the in situ setup, while allowing larger quantities of material to be produced. The agreement in phase composition between the two studies reveals comparability between both experimental setups. Hexagonal platelet morphology is confirmed for SrFe12O19 combining Rietveld refinements of powder X-ray diffraction (PXRD) data with transmission electron microscopy (TEM). Room temperature magnetization curves were measured on the nanopowders prepared ex situ. The magnetic properties are discussed in the context of the influence of phase composition and crystallite size., The authors would like to thank financial support from the European Commission through the project NANOPYME FP7-NMP-2012-SMALL-6 NANOPYME (No. 310516). The work was likewise supported by the Danish National Research Foundation (Center for Materials Crystallography, DNRF93) and the Danish Research Council for Nature and Universe (Danscatt). Furthermore, support by the European Community's Seventh Framework Programme (FP7/2007-2013) CALIPSO under Grant Agreement No. 312284 is also acknowledged. Support is also gratefully accepted from the Danish Research Council for Technology and Production Sciences through a Sapere Aude grant (Improved Permanent Magnets through Nanostructuring)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchically structured multifunctional porous interfaces through water templated self-assembly of ternary systems

  • Sanz de León, Alberto
  • Campo, Ángel Adolfo del
  • Fernández-García, Marta
  • Rodríguez-Hernández, Juan
  • Muñoz-Bonilla, Alexandra
Herein, a facile water-assisted templating approach, the so-called breath figures method, has been employed to prepare multifunctional and hierarchically structured porous patterned films with order at different length scales (nano- and micrometer). Tetrahydrofuran solutions of ternary blends consisting on high molecular weight polystyrene, an amphiphilic block copolymer, polystyrene-b-poly[poly(ethylene glycol) methyl ether methacrylate] (PS 40-b-P(PEGMA300) 48), and a fluorinated copolymer, polystyrene-b-poly(2,3,4,5,6-pentafluorostyrene) (P5FS 21-b-PS 31), have been used to obtain films varying the proportion of the three components. Confocal micro-Raman spectroscopy and atomic force microscopy demonstrated the preferential location of the different functionalities in the films. Because of the breath figures mechanism, the amphiphilic copolymer yield pores enriched in hydrophilic functionality while the fluorinated copolymer remained mixed with the PS matrix and eventually also forming self-assembled nanostructures at the surface. As a consequence, two levels of order can be observed, i.e., micrometer size pores with nanostructured domains due to the block copolymer self-assembly. In addition, the distribution of the amphiphilic copolymer within the holes is not regular being located principally on the edges of the cavities. This can be attributed to the coffee stain phenomenon occurring in the water droplets as a consequence of the segregation of the block copolymers to the droplets and their self-assembly. © 2012 American Chemical Society., This work was financially supported by the MINECO (ProjectsMAT2010-17016, MAT2010-21088-C03-01, and COST Ac-tion MP0904 SIMUFER). A. Muñoz-Bonilla gratefully acknowledges the MINECO for her Juan de la Cierva postdoctoral contract, and A. S. de León thanks the MECD for his FPU predoctoral fellowship. Authors thank Dr. M.Hoyos for his valuable discussions on the coffee stain effect.The synchrotron work leading to these results was performed at DESY and received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 312284. We are grateful for collaboration of the Hasylab personnel, especially Dr. S. S. Funari
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlled ultra-thin oxidation of graphite promoted by cobalt oxides: Influence of the initial 2D CoO wetting layer

  • Morales, C.
  • Díaz-Fernández, D.
  • Mossanek, R.J.O.
  • Abbate, M.
  • Méndez, Javier
  • Pérez-Dieste, V.
  • Escudero, C.
  • Rubio-Zuazo, J.
  • Prieto, P.
  • Soriano, L.
The interaction of CoO with highly oriented pyrolytic graphite (HOPG) was studied using a set of complementary techniques. The morphology of the CoO thin film was determined using atomic force microscopy (AFM), whereas the electronic structure was investigated using X-ray absorption (XAS) and photoemission (PES) spectroscopies. The experimental spectra were analyzed using a configuration interaction CoO<inf>6</inf> cluster model calculation. The early stages of growth are characterized by the formation of a CoO wetting layer at the CoO/HOPG interface. The electronic structure of the CoO wetting layer presents a clear 2D character, which is closer to the 2D HOPG substrate than to the 3D CoO bulk. This character of the wetting layer explains the posterior formation of CoO islands and excludes the alternative layer by layer growth mode. Further, the interaction between the CoO wetting layer and the outermost graphite layer favors the oxidation of the HOPG substrate which can be controlled by the thickness of the deposited CoO overlayer. © 2019 Elsevier B.V., This investigation has been funded by the MINECO of Spain through the FIS2015-67367-C2-1-P project and by the Comunidad de Madrid through the NANOMAGCOSTCM-P2018/NMT4321 project. Authors R.J.O.M and M.A. thank the financial support of CNPq-Brazil. We thank HZB for the allocation of synchrotron radiation beamtime. Funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement n.°312284 is acknowledged. We thank the ALBA synchrotron staff for the successful performance of the CIRCE beam line during the NAP-XPS experiments. We acknowledge the Spanish MCIU and CSIC for financial support and for provision of synchrotron radiation facilities at BM25-SpLine at the ESRF. One of the authors (C.M.) thanks MCIU for a FPU grant. We also want to thank SEGAINVEX-UAM and SIdI-UAM for technical support., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Terahertz field control of in-plane orbital order in La0.5Sr1.5MnO4

  • Miller, Timothy A.
  • Chhajlany, Ravindra W.
  • Tagliacozzo, Luca
  • Green, Bertram
  • Kovalev, Sergey
  • Prabhakaran, Dharmalingam
  • Lewenstein, Maciej
  • Gensch, Michael
  • Wall, Simon
In-plane anisotropic ground states are ubiquitous in correlated solids such as pnictides, cuprates and manganites. They can arise from doping Mott insulators and compete with phases such as superconductivity; however, their origins are debated. Strong coupling between lattice, charge, orbital and spin degrees of freedom results in simultaneous ordering of multiple parameters, masking the mechanism that drives the transition. Here we demonstrate that the orbital domains in a manganite can be oriented by the polarization of a pulsed THz light field. Through the application of a Hubbard model, we show that domain control can be achieved by enhancing the local Coulomb interactions, which drive domain reorientation. Our results highlight the key role played by the Coulomb interaction in the control and manipulation of orbital order in the manganites and demonstrate a new way to use THz to understand and manipulate anisotropic phases in a potentially broad range of correlated materials., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pallasite paleomagnetism: Quiescence of a core dynamo

  • Nichols, C.I.O.
  • Bryson, J.F.J.
  • Herrero-Albillos, J.
  • Kronast, F.
  • Nimmo, F.
  • Harrison, R.J.
Recent paleomagnetic studies of two Main Group pallasites, the Imilac and Esquel, have found evidence for a strong, late-stage magnetic field on the parent body. It has been hypothesized that this magnetic field was generated by a core dynamo, driven by compositional convection during core solidification. Cooling models suggest that the onset of core solidification occurred ~200 Ma after planetary accretion. Prior to core solidification, a core dynamo may have been generated by thermal convection; however a thermal dynamo is predicted to be short-lived, with a duration of ~10 Ma to ~40 Ma after planetary accretion. These models predict, therefore, a period of quiescence between the thermally driven dynamo and the compositionally driven dynamo, when no core dynamo should be active. To test this hypothesis, we have measured the magnetic remanence recorded by the Marjalahti and Brenham pallasites, which based on cooling-rate data locked in any magnetic field signals present ~95 Ma to ~135 Ma after planetary accretion, before core solidification began. The cloudy zone, a region of nanoscale tetrataenite islands within a Fe-rich matrix was imaged using X-ray photoemission electron microscopy. The recovered distribution of magnetisation within the cloudy zone suggests that the Marjalahti and Brenham experienced a very weak magnetic field, which may have been induced by a crustal remanence, consistent with the predicted lack of an active core dynamo at this time. We show that the transition from a quiescent period to an active, compositionally driven dynamo has a distinctive paleomagnetic signature, which may be a crucial tool for constraining the time of core solidification on differentiated bodies, including Earth.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tunable Band Alignment with Unperturbed Carrier Mobility of On-Surface Synthesized Organic Semiconducting Wires

  • Basagni, A.
  • Vasseur, G.
  • Pignedoli, C.A.
  • Vilas-Varela, M.
  • Penã, D.
  • Nicolas, L.
  • Vitali, L.
  • Lobo-Checa, J.
  • De Oteyza, D.G.
  • Sedona, F.
  • Casarin, M.
  • Ortega, J.E.
  • Sambi, M.
The tunable properties of molecular materials place them among the favorites for a variety of future generation devices. In addition, to maintain the current trend of miniaturization of those devices, a departure from the present top-down production methods may soon be required and self-assembly appears among the most promising alternatives. On-surface synthesis unites the promises of molecular materials and of self-assembly, with the sturdiness of covalently bonded structures: An ideal scenario for future applications. Following this idea, we report the synthesis of functional extended nanowires by self-assembly. In particular, the products correspond to one-dimensional organic semiconductors. The uniaxial alignment provided by our substrate templates allows us to access with exquisite detail their electronic properties, including the full valence band dispersion, by combining local probes with spatial averaging techniques. We show how, by selectively doping the molecular precursors, the product''s energy level alignment can be tuned without compromising the charge carrier''s mobility.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Competition between Superconductor-Ferromagnetic stray magnetic fields in YBa2Cu3O7-x films pierced with Co nano-rods

  • Rouco, V.
  • Córdoba, R.
  • De Teresa, J.M.
  • Rodríguez, L.A.
  • Navau, C.
  • Del-Valle, N.
  • Via, G.
  • Sánchez, A.
  • Monton, C.
  • Kronast, F.
  • Obradors, X.
  • Puig, T.
  • Palau, A.
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-Temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC)-ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-Trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structural basis of mitochondrial dysfunction in response to cytochrome c phosphorylation at tyrosine 48

  • Moreno-Beltrán, B.
  • Guerra-Castellano, A.
  • Díaz-Quintana, A.
  • Conte, R.D.
  • García-Mauriño, S.M.
  • Díaz-Moreno, S.
  • González-Arzola, K.
  • Santos-Ocaña, C.
  • Velázquez-Campoy, A.
  • De la Rosa, M.A.
  • Turano, P.
  • Díaz-Moreno, I.
Regulation of mitochondrial activity allows cells to adapt to changing conditions and to control oxidative stress, and its dysfunction can lead to hypoxia-dependent pathologies such as ischemia and cancer. Although cytochrome c phosphorylation—in particular, at tyrosine 48—is a key modulator of mitochondrial signaling, its action and molecular basis remain unknown. Here we mimic phosphorylation of cytochrome c by replacing tyrosine 48 with p-carboxy-methyl-L-phenylalanine (pCMF). The NMR structure of the resulting mutant reveals significant conformational shifts and enhanced dynamics around pCMF that could explain changes observed in its functionality: The phosphomimetic mutation impairs cytochrome c diffusion between respiratory complexes, enhances hemeprotein peroxidase and reactive oxygen species scavenging activities, and hinders caspase-dependent apoptosis. Our findings provide a framework to further investigate the modulation of mitochondrial activity by phosphorylated cytochrome c and to develop novel therapeutic approaches based on its prosurvival effects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microstructural and paleomagnetic insight into the cooling history of the IAB parent body

  • Nichols, C.I.O.
  • Krakow, R.
  • Herrero-Albillos, J.
  • Kronast, F.
  • Northwood-Smith, G.
  • Harrison, R.J.
The IABs represent one of only two groups of iron meteorites that did not form by fractional crystallization of liquid Fe-Ni in the core of a differentiated planetesimal. Instead, they are believed to originate from a partially differentiated body that was severely disrupted by one or more impacts during its early history. We present a detailed microstructural and paleomagnetic study of the Odessa and Toluca IAB meteorites, with a view to further constraining the complex history of the IAB parent body. X-ray photoemission electron microscopy and energy dispersive spectroscopy were used to generate high-resolution Ni/Fe maps. The crystallographic architecture of Odessa was analysed using electron backscatter diffraction. Paleomagnetic signals and the magnetic properties of several microstructures were also assessed using X-ray magnetic circular dichroism. Odessa exhibits a complex series of microstructures, requiring an unusual evolution during slow cooling. A conventional Widmanstätten microstructure, consisting of multiple generations of kamacite lamellae surrounded by M-shaped diffusion profiles, developed via continuous precipitation to temperatures below ~400 °C. Multiple generations of pearlitic plessite nucleated from kamacite/taenite (T > 400 °C) and tetrataenite rim/taenite interfaces (T < 400 °C), via a process of discontinuous precipitation. Rounded rafts of Ni-rich taenite, observed within some regions of pearlitic plessite, are shown to have the same crystallographic orientation as the parental taenite, and a non-standard orientation relationship with the enclosing kamacite. Contrary to current theories, these rafts cannot have formed by coarsening of pre-existing pearlitic plessite. A new bowing mechanism is proposed, whereby rafts of Ni-enriched taenite form between advancing lobes of an irregular reaction front during discontinuous precipitation. Subsequent coarsening leads to the growth of the taenite rafts, and the partial or complete removal of pearlite lamellae, resulting in spheroidised plessite with a crystallographic architecture matching the experimental observations. We find no evidence for a strong magnetic field on the IAB parent body, suggesting it did not have an active core dynamo at the time of cloudy zone formation. This supports the prediction that the IAB parent body was unable to form a significant core due to the redistribution of metal during an earlier impact event.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Variations in the Magnetic Properties of Meteoritic Cloudy Zone

  • Nichols, C.I.O.
  • Bryson, J.F.J.
  • Blukis, R.
  • Herrero-Albillos, J.
  • Kronast, F.
  • Rüffer, R.
  • Chumakov, A.I.
  • Harrison, R.J.
Iron and stony-iron meteorites form the Widmanstätten pattern during slow cooling. This pattern is composed of several microstructures whose length-scale, composition and magnetic properties are dependent upon cooling rate. Here we focus on the cloudy zone: a region containing nanoscale tetrataenite islands with exceptional paleomagnetic recording properties. We present a systematic review of how cloudy zone properties vary with cooling rate and proximity to the adjacent tetrataenite rim. X-ray photoemission electron microscopy is used to compare compositional and magnetization maps of the cloudy zone in the mesosiderites (slow cooling rates), the IAB iron meteorites and the pallasites (intermediate cooling rates), and the IVA iron meteorites (fast cooling rates). The proportions of magnetic phases within the cloudy zone are also characterized using Mössbauer spectroscopy. We present the first observations of the magnetic state of the cloudy zone in the mesosiderites, showing that, for such slow cooling rates, tetrataenite islands grow larger than the multidomain threshold, creating large-scale regions of uniform magnetization across the cloudy zone that render it unsuitable for paleomagnetic analysis. For the most rapidly cooled IVA meteorites, the time available for Fe-Ni ordering is insufficient to allow tetrataenite formation, again leading to behavior that is unsuitable for paleomagnetic analysis. The most reliable paleomagnetic remanence is recorded by meteorites with intermediate cooling rates (~ 2–500 °C Myr-1) which produces islands that are “just right” in both size and degree of Fe-Ni order.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Terahertz field control of in-plane orbital order in La0.5Sr1.5MnO4

  • Miller, Timothy A.
  • Chhajlany, Ravindra W.
  • Tagliacozzo, Luca
  • Green, Bertram
  • Kovalev, Sergey
  • Prabhakaran, Dharmalingam
  • Lewenstein, Maciej
  • Gensch, Michael
  • Wall, Simon
In-plane anisotropic ground states are ubiquitous in correlated solids such as pnictides, cuprates and manganites. They can arise from doping Mott insulators and compete with phases such as superconductivity; however, their origins are debated. Strong coupling between lattice, charge, orbital and spin degrees of freedom results in simultaneous ordering of multiple parameters, masking the mechanism that drives the transition. Here we demonstrate that the orbital domains in a manganite can be oriented by the polarization of a pulsed THz light field. Through the application of a Hubbard model, we show that domain control can be achieved by enhancing the local Coulomb interactions, which drive domain reorientation. Our results highlight the key role played by the Coulomb interaction in the control and manipulation of orbital order in the manganites and demonstrate a new way to use THz to understand and manipulate anisotropic phases in a potentially broad range of correlated materials., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Surface composition changes of CuNi-ZrO2 catalysts during methane decomposition: An operando NAP-XPS and density functional study

  • Wolfbeisser, Astrid
  • Kovács, Gábor
  • Kozlov, Sergey
  • Föttinger, Karin
  • Bernardi, Johannes
  • Klötzer, Bernhard
  • Neyman, Konstantin M.
  • Rupprechter, Günther
Bimetallic CuNi nanoparticles of various nominal compositions (1:3, 1:1, 3:1) supported on ZrO2wereemployed for operando spectroscopy and theoretical studies of stable surface compositions under reac-tion conditions of catalytic methane decomposition up to 500◦C. The addition of Cu was intended toincrease the coke resistance of the catalyst. After synthesis and (in situ) reduction the CuNi nanoparticleswere characterized by HR-TEM/EDX, XRD, FTIR (using CO as probe molecule) and NAP-XPS, all indicatinga Cu rich surface, even when the overall nanoparticle composition was rich in Ni. Density functional (DF)theory modelling, applying a recently developed computational protocol based on the construction oftopological energy expressions, confirmed that in any studied composition Cu segregation on surfacepositions is an energetically favourable process, with Cu preferentially occupying corner and edge sites.Ni is present on terraces only when not enough Cu atoms are available to occupy all surface sites.When the catalysts were applied for methane decomposition they were inactive at low temperaturebut became active above 425◦C. Synchrotron-based operando NAP-XPS indicated segregation of Ni on thenanoparticle surface when reactivity set in for CuNi-ZrO2. Under these conditions C 1s core level spectrarevealed the presence of various carbonaceous species at the surface. DF calculations indicated that boththe increase in temperature and especially the adsorption of CHxgroups (x = 0-3) induce the segregationof Ni atoms on the surface, with CH3providing the lowest and C the highest driving force.Combined operando and theoretical studies clearly indicate that, independent of the initial surfacecomposition after synthesis and reduction, the CuNi-ZrO2catalyst adopts a specific Ni rich surface underreaction conditions. Based on these findings we provide an explanation why Cu rich bimetallic systemsshow improved coke resistance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Competition between superconductor, ferromagnetic stray magnetic fields in YBa2Cu3O7-x films pierced with Co nano-rods

  • Rouco Gómez, Víctor
  • Córdoba, R.
  • De Teresa, J. M.
  • Rodríguez, L. A.
  • Navau, Carles|||0000-0003-4763-5305
  • Valle, Nuria del|||0000-0003-2608-5009
  • Via, Guillem|||0000-0002-4789-1600
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Monton, Carlos
  • Kronast, F.
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Palau, Anna|||0000-0002-2217-164X
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC) - ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Encoding magnetic states in monopole-like configurations using superconducting dots

  • Palau, Anna|||0000-0002-2217-164X
  • Valencia, Sergio|||0000-0002-3912-5797
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Cialone, Matteo|||0000-0002-3018-2787
  • Arora, Ashima
  • Kronast, Florian
  • Tennant, D. Alan
  • Obradors, Xavier|||0000-0003-4592-7718
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
A large manifold of nontrivial spin textures, including the stabilization of monopole-like fields, are generated by using a completely new and versatile approach based on the combination of superconductivity and magnetism. Robust, stable, and easily controllable complex spin structures are encoded, modified, and annihilated in a continuous magnetic thin film by defining a variety of magnetic states in superconducting dots.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Towards microscopic control of the magnetic exchange coupling at the surface of a topological insulator

  • Rüssmann, Philipp|||0000-0002-6196-2700
  • Mahatha, Sanjoy K.|||0000-0002-5394-6911
  • Sessi, Paolo
  • Valbuena, Miguel Ángel|||0000-0002-0585-5636
  • Bathon, Thomas
  • Fauth, Kai
  • Godey, Sylvie
  • Mugarza, Aitor|||0000-0002-2698-885X
  • Kokh, Konstantin A.
  • Tereshchenko, Oleg E.
  • Gargiani, Pierluigi|||0000-0002-6649-0538
  • Valvidares, Manuel|||0000-0003-4895-8114
  • Jiménez, Erika
  • Brookes, N. B.|||0000-0002-1342-9530
  • Bode, Matthias|||0000-0001-7514-5560
  • Bihlmayer, G.|||0000-0002-6615-1122
  • Blügel, Stefan
  • Mavropoulos, Phivos|||0000-0002-0205-8025
  • Carbone, Carlo|||0000-0002-8675-7850
  • Barla, Alessandro|||0000-0002-5632-4915
Magnetically doped topological insulators may produce novel states of electronic matter, where for instance the quantum anomalous Hall effect state can be realized. Pivotal to this goal is a microscopic control over the magnetic state, defined by the local electronic structure of the dopants and their interactions. We report on the magnetic coupling among Mn or Co atoms adsorbed on the surface of the topological insulator Bi2Te3. Our findings uncover the mechanisms of the exchange coupling between magnetic atoms coupled to the topological surface state in strong topological insulators. The combination of x-ray magnetic circular dichroism and ab initio calculations reveals that the sign of the magnetic coupling at short adatom-adatom distances is opposite for Mn with respect to Co. For both elements, the magnetic exchange reverses its sign at a critical distance between magnetic adatoms, as a result of the interplay between superexchange, double exchange and Ruderman-Kittel-Kasuya-Yoshida interactions.
RUO. Repositorio Institucional de la Universidad de Oviedo
Publicación Artículo científico (JournalArticle)

Electronic properties of single-layer CoO2/Au(111)

  • Holt, A. J. U.
  • Pakdel, S.
  • Rodríguez Fernández, Jonathan|||0000-0001-9448-6328
We gratefully acknowledge financial support from the VILLUM FONDEN via the Centre of Excellence for Dirac Materials (Grant No. 11744) and VILLUM project grant no. 13264 (J.V.L.). Y.-X.Y. was supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, as part of the Computational Materi- als Science Program. C.E.S. received support from the European Community’s Seventh Framework Programme (FP7/2007-2013) CALIPSO under grant agreement no 312284., Holt, A.J.U., Pakdel, S., Rodríguez-Fernández, J., Zhang, Y., Curcio, D., Sun, Z., Lacovig, P., Yao, Y.-X., Lauritsen, J.V., Lizzit, S., Lanat, N., Hofmann, P., Bianchi, M., Sanders, C.E.