Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Can the state of platinum species be unambiguously determined by the stretching frequency of adsorbed CO probe molecule?

  • Aleksandrov, Hristiyan A.
  • Neyman, Konstantin M.
  • Hadjiivanov, Konstantin I.
  • Vayssilov, Georgi N.
The paper addresses possible ambiguities in the determination of the state of platinum species by the stretching frequency of a CO probe, which is a common technique for characterization of platinum-containing catalytic systems. We present a comprehensive comparison of the available experimental data with our theoretical modeling (density functional) results of pertinent systems - platinum surfaces, nanoparticles and clusters as well as reduced or oxidized platinum moieties on a ceria support. Our results for CO adsorbed on-top on metallic Pt0, with C-O vibrational frequencies in the region 2018-2077 cm−1, suggest that a decrease of the coordination number of the platinum atom, to which CO is bound, by one lowers the CO frequency by about 7 cm−1. This trend corroborates the Kappers-van der Maas correlation derived from the analysis of the experimental stretching frequency of CO adsorbed on platinum-containing samples on different supports. We also analyzed the effect of the charge of platinum species on the CO frequency. Based on the calculated vibrational frequencies of CO in various model systems, we concluded that the actual state of the platinum species may be mistaken based only on the measured value of the C-O vibrational frequency due to overlapping regions of frequencies corresponding to different types of species. In order to identify the actual state of platinum species one has to combine this powerful technique with other approaches.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Versatile optimization of chemical ordering in bimetallic nanoparticles

  • Kovács, Gábor
  • Kozlov, Sergey
  • Neyman, Konstantin M.
Chemical ordering in bimetallic nanocrystallites can now be efficiently determined by density-functional calculations with the help of topological energy expressions. Herein, we deal with extending the usage of that computational scheme. We show that it enables one to structurally characterize bimetallic nanoparticles of less regular shapes than previously studied magic-type particles. In fcc Pd-Au particles of different shapes (cuboctahedral Pd58Au58, C3v Pd61Au61, cubic Pd68Au67, and truncated octahedral Pd70Au70), we identify the surface segregation of gold as the driving force to the lowest-energy chemical ordering. We applied the calculated descriptor values quantifying the segregation propensity of Au and energies of Pd-Au bonds in these ∼1.5 nm large particles to optimize and analyze the chemical ordering in 3.7-6 nm large Pd-Au particles. We also discuss how to predict the chemical ordering in nanoalloys at elevated temperatures. The present study paves the way to advanced structural investigations of nanoalloys to substantially accelerate their knowledge-driven engineering and manufacturing.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

How to determine accurate chemical ordering in several nanometer large bimetallic crystallites from electronic structure calculations

  • Kozlov, Sergey
  • Kovács, Gábor
  • Ferrando, Riccardo
  • Neyman, Konstantin M.
Chemical and physical properties of binary metallic nanoparticles (nanoalloys) are to a great extent defined by their chemical ordering, i.e. the pattern in which atoms of the two elements are located in a given crystal lattice. The reliable determination of the lowest-energy chemical ordering is a challenge that impedes in-depth studies of several nm large bimetallic particles. We propose a method to efficiently optimize the chemical ordering based solely on results of electronic structure (density functional) calculations. We show that the accuracy of this method is practically the same as the accuracy of the underlying quantum mechanical approach. This method, due to its simplicity, immediately reveals why one or another chemical ordering is preferred and unravels the nature of the binding within the nanoparticles. For instance, our results provide very intuitive understanding of why gold and silver segregate on low-coordinated sites in Pd70Au70 and Pd70Ag70 particles, while Pd70Cu70 exhibits matryoshka-like structure and Pd70Zn70 features Zn and Pd atoms arranged in layers. To illustrate the power of the new method we optimized the chemical ordering in much larger Pd732Au731, Pd732Ag731, Pd732Cu731, and Pd732Zn731 nanocrystals, whose size ~4.4 nm is common for catalytic applications.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Surface composition changes of CuNi-ZrO2 catalysts during methane decomposition: An operando NAP-XPS and density functional study

  • Wolfbeisser, Astrid
  • Kovács, Gábor
  • Kozlov, Sergey
  • Föttinger, Karin
  • Bernardi, Johannes
  • Klötzer, Bernhard
  • Neyman, Konstantin M.
  • Rupprechter, Günther
Bimetallic CuNi nanoparticles of various nominal compositions (1:3, 1:1, 3:1) supported on ZrO2wereemployed for operando spectroscopy and theoretical studies of stable surface compositions under reac-tion conditions of catalytic methane decomposition up to 500◦C. The addition of Cu was intended toincrease the coke resistance of the catalyst. After synthesis and (in situ) reduction the CuNi nanoparticleswere characterized by HR-TEM/EDX, XRD, FTIR (using CO as probe molecule) and NAP-XPS, all indicatinga Cu rich surface, even when the overall nanoparticle composition was rich in Ni. Density functional (DF)theory modelling, applying a recently developed computational protocol based on the construction oftopological energy expressions, confirmed that in any studied composition Cu segregation on surfacepositions is an energetically favourable process, with Cu preferentially occupying corner and edge sites.Ni is present on terraces only when not enough Cu atoms are available to occupy all surface sites.When the catalysts were applied for methane decomposition they were inactive at low temperaturebut became active above 425◦C. Synchrotron-based operando NAP-XPS indicated segregation of Ni on thenanoparticle surface when reactivity set in for CuNi-ZrO2. Under these conditions C 1s core level spectrarevealed the presence of various carbonaceous species at the surface. DF calculations indicated that boththe increase in temperature and especially the adsorption of CHxgroups (x = 0-3) induce the segregationof Ni atoms on the surface, with CH3providing the lowest and C the highest driving force.Combined operando and theoretical studies clearly indicate that, independent of the initial surfacecomposition after synthesis and reduction, the CuNi-ZrO2catalyst adopts a specific Ni rich surface underreaction conditions. Based on these findings we provide an explanation why Cu rich bimetallic systemsshow improved coke resistance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxygen vacancies in self-assemblies of ceria nanoparticles

  • Lim, Kok Hwa
  • Migani, Annapaola
Cerium dioxide (CeO2, ceria) nanoparticles possess size-dependent chemical properties, which may be very different from those of the bulk material. Agglomeration of such particles in nanoarchitectures may further significantly affect their properties. We computationally model the self-assembly of CenO2n particles (n = 38, 40, 80)-zero-dimensional (0D) structures-in one- and two-dimensional (1D and 2D) nanoarchitectures by employing density-functional methods. The electronic properties of 1D Ce80O160 and 2D Ce40O80 resemble those of larger 0D crystallites, Ce140O280, rather than those of their building blocks. These 0D, 1D and 2D nanostructures are employed to study the size dependence of the formation energy of an oxygen vacancy, Ef(Ovac), a central property in ceria chemistry. We rationalize within a common electronic structure framework the variations of the Ef(Ovac) values, which are computed for the CenO2n nanostructures with different sizes and dimensionalities. We identify: (i) the bandwidth of the unoccupied density of states projected onto the Ce 4f levels as an important factor, which controls Ef(Ovac); and (ii) the corner Ce atoms as the structural motif essential for a noticeable reduction of Ef(Ovac). These results help to understand the size dependent behaviour of Ef(Ovac) in nanostructured ceria., Financial support has been provided by the European Community (FP7-NMP.2012.1.1-1 project ChipCAT, Ref. Nº310191), the Spanish MINECO (CTQ2012-34969, FIS2012-37549-C05-02, RYC-2011-09582) and the Generalitat de Catalunya (2014SGR97, 2014SGR301, XRQTC). SMK thanks the Spanish Ministerio de Educación for a pre-doctoral FPU grant AP2009-3379., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Surface composition changes of CuNi-ZrO2 catalysts during methane decomposition: An operando NAP-XPS and density functional study

  • Wolfbeisser, Astrid
  • Kovács, Gábor
  • Kozlov, Sergey
  • Föttinger, Karin
  • Bernardi, Johannes
  • Klötzer, Bernhard
  • Neyman, Konstantin M.
  • Rupprechter, Günther
Bimetallic CuNi nanoparticles of various nominal compositions (1:3, 1:1, 3:1) supported on ZrO2wereemployed for operando spectroscopy and theoretical studies of stable surface compositions under reac-tion conditions of catalytic methane decomposition up to 500◦C. The addition of Cu was intended toincrease the coke resistance of the catalyst. After synthesis and (in situ) reduction the CuNi nanoparticleswere characterized by HR-TEM/EDX, XRD, FTIR (using CO as probe molecule) and NAP-XPS, all indicatinga Cu rich surface, even when the overall nanoparticle composition was rich in Ni. Density functional (DF)theory modelling, applying a recently developed computational protocol based on the construction oftopological energy expressions, confirmed that in any studied composition Cu segregation on surfacepositions is an energetically favourable process, with Cu preferentially occupying corner and edge sites.Ni is present on terraces only when not enough Cu atoms are available to occupy all surface sites.When the catalysts were applied for methane decomposition they were inactive at low temperaturebut became active above 425◦C. Synchrotron-based operando NAP-XPS indicated segregation of Ni on thenanoparticle surface when reactivity set in for CuNi-ZrO2. Under these conditions C 1s core level spectrarevealed the presence of various carbonaceous species at the surface. DF calculations indicated that boththe increase in temperature and especially the adsorption of CHxgroups (x = 0-3) induce the segregationof Ni atoms on the surface, with CH3providing the lowest and C the highest driving force.Combined operando and theoretical studies clearly indicate that, independent of the initial surfacecomposition after synthesis and reduction, the CuNi-ZrO2catalyst adopts a specific Ni rich surface underreaction conditions. Based on these findings we provide an explanation why Cu rich bimetallic systemsshow improved coke resistance.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Can the state of platinum species be unambiguously determined by the stretching frequency of adsorbed CO probe molecule?

  • Aleksandrov, Hristiyan A.
  • Neyman, Konstantin M.
  • Hadjiivanov, Konstantin I.
  • Vayssilov, Georgi N.
The paper addresses possible ambiguities in the determination of the state of platinum species by the stretching frequency of a CO probe, which is a common technique for characterization of platinum-containing catalytic systems. We present a comprehensive comparison of the available experimental data with our theoretical modeling (density functional) results of pertinent systems - platinum surfaces, nanoparticles and clusters as well as reduced or oxidized platinum moieties on a ceria support. Our results for CO adsorbed on-top on metallic Pt0, with C-O vibrational frequencies in the region 2018-2077 cm−1, suggest that a decrease of the coordination number of the platinum atom, to which CO is bound, by one lowers the CO frequency by about 7 cm−1. This trend corroborates the Kappers-van der Maas correlation derived from the analysis of the experimental stretching frequency of CO adsorbed on platinum-containing samples on different supports. We also analyzed the effect of the charge of platinum species on the CO frequency. Based on the calculated vibrational frequencies of CO in various model systems, we concluded that the actual state of the platinum species may be mistaken based only on the measured value of the C-O vibrational frequency due to overlapping regions of frequencies corresponding to different types of species. In order to identify the actual state of platinum species one has to combine this powerful technique with other approaches.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

How to determine accurate chemical ordering in several nanometer large bimetallic crystallites from electronic structure calculations

  • Kozlov, Sergey
  • Kovács, Gábor
  • Ferrando, Riccardo
  • Neyman, Konstantin M.
Chemical and physical properties of binary metallic nanoparticles (nanoalloys) are to a great extent defined by their chemical ordering, i.e. the pattern in which atoms of the two elements are located in a given crystal lattice. The reliable determination of the lowest-energy chemical ordering is a challenge that impedes in-depth studies of several nm large bimetallic particles. We propose a method to efficiently optimize the chemical ordering based solely on results of electronic structure (density functional) calculations. We show that the accuracy of this method is practically the same as the accuracy of the underlying quantum mechanical approach. This method, due to its simplicity, immediately reveals why one or another chemical ordering is preferred and unravels the nature of the binding within the nanoparticles. For instance, our results provide very intuitive understanding of why gold and silver segregate on low-coordinated sites in Pd70Au70 and Pd70Ag70 particles, while Pd70Cu70 exhibits matryoshka-like structure and Pd70Zn70 features Zn and Pd atoms arranged in layers. To illustrate the power of the new method we optimized the chemical ordering in much larger Pd732Au731, Pd732Ag731, Pd732Cu731, and Pd732Zn731 nanocrystals, whose size ~4.4 nm is common for catalytic applications.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Versatile optimization of chemical ordering in bimetallic nanoparticles

  • Kovács, Gábor
  • Kozlov, Sergey
  • Neyman, Konstantin M.
Chemical ordering in bimetallic nanocrystallites can now be efficiently determined by density-functional calculations with the help of topological energy expressions. Herein, we deal with extending the usage of that computational scheme. We show that it enables one to structurally characterize bimetallic nanoparticles of less regular shapes than previously studied magic-type particles. In fcc Pd-Au particles of different shapes (cuboctahedral Pd58Au58, C3v Pd61Au61, cubic Pd68Au67, and truncated octahedral Pd70Au70), we identify the surface segregation of gold as the driving force to the lowest-energy chemical ordering. We applied the calculated descriptor values quantifying the segregation propensity of Au and energies of Pd-Au bonds in these ∼1.5 nm large particles to optimize and analyze the chemical ordering in 3.7-6 nm large Pd-Au particles. We also discuss how to predict the chemical ordering in nanoalloys at elevated temperatures. The present study paves the way to advanced structural investigations of nanoalloys to substantially accelerate their knowledge-driven engineering and manufacturing.