Pasar al contenido principal

RED ESPAÑOLA DE NANOLITOGRAFIA

MAT2015-69725-REDT

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Redes Investigación /Redes Excelencia
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Origin of inverse Rashba-Edelstein effect detected at the Cu/Bi interface using lateral spin valves

  • Isasa, Miren
  • Martínez-Velarte, María C.
  • Villamor, Estitxu
  • Magén, César
  • Morellón, Luis
  • Teresa, José María de
  • Ibarra, M. Ricardo
  • Vignale, G.
  • Chulkov, Eugene V.
  • Krasovskii, E. E.
  • Hueso, Luis E.
  • Casanova, Félix
Under the terms of the Creative Commons Attribution License 3.0 (CC-BY)., The spin transport and spin-to-charge current conversion properties of bismuth are investigated using permalloy/copper/bismuth (Py/Cu/Bi) lateral spin valve structures. The spin current is strongly absorbed at the surface of Bi, leading to ultrashort spin-diffusion lengths. A spin-to-charge current conversion is measured, which is attributed to the inverse Rashba-Edelstein effect at the Cu/Bi interface. The spin-current-induced charge current is found to change direction with increasing temperature. A theoretical analysis relates this behavior to the complex spin structure and dispersion of the surface states at the Fermi energy. The understanding of this phenomenon opens novel possibilities to exploit spin-orbit coupling to create, manipulate, and detect spin currents in two-dimensional systems., This work was supported by the European Commission under the Marie Curie Actions (Grant No. 256470-ITAMOSCINOM), the SUDOE (Grant No. TRAIN2-SOE2/P1/E-280), and the European Research Council (Grant No. 257654-SPINTROS), by the Spanish MINECO under Projects No. MAT2012-37638, No. MAT2011-13099-E, No. MAT2011-27553-C02, No. MAT2014-51982-C2-1-R, No. MAT2015-69725-REDT, and No. FIS2013-48286-C2-1-P, including FEDER funds, by the Basque Government under Project No. PI2011-1, and by the Aragon Regional Government under Project No. E26. M.I. and E.V. thank the Basque Government for Ph.D. fellowships (Grants No. BFI-2011-106 and No. BFI-2010-163)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advanced oxidation scanning probe lithography

  • Ryu, Y. K.
  • García García, Ricardo
Force microscopy enables a variety of approaches to manipulate and/or modify surfaces. Few of those methods have evolved into advanced probe-based lithographies. Oxidation scanning probe lithography (o-SPL) is the only lithography that enables the direct and resist-less nanoscale patterning of a large variety of materials, from metals to semiconductors; from self-assembled monolayers to biomolecules. Oxidation SPL has also been applied to develop sophisticated electronic and nanomechanical devices such as quantum dots, quantum point contacts, nanowire transistors or mechanical resonators. Here, we review the principles, instrumentation aspects and some device applications of o-SPL. Our focus is to provide a balanced view of the method that introduces the key steps in its evolution, provides some detailed explanations on its fundamentals and presents current trends and applications. To illustrate the capabilities and potential of o-SPL as an alternative lithography we have favored the most recent and updated contributions in nanopatterning and device fabrication., This work was funded by the European Union FP7/2007-2013 under Grant Agreement No. 318804 (SNM) and the Ministerio de Economía y Competitividad (Spain) under grants MAT2013-44858-R, MAT2015-69725-REDT and MAT2016-76507-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Review of magnetic nanostructures grown by focused electron beam induced deposition (FEBID)

  • Teresa, José María de
  • Fernández-Pacheco, Amalio
  • Córdoba, Rosa
  • Serrano-Ramón, Luis
  • Sangiao, S.
  • Ibarra, M. Ricardo
We review the current status of the use of focused electron beam induced deposition (FEBID) for the growth of magnetic nanostructures. This technique relies on the local dissociation of a precursor gas by means of an electron beam. The most promising results have been obtained using the Co(CO) precursor, where the Co content in the grown nanodeposited material can be tailored up to more than 95 at.%. Functional behaviour of these Co nanodeposits has been observed in applications such as arrays of magnetic dots for information storage and catalytic growth, magnetic tips for scanning probe microscopes, nano-Hall sensors for bead detection, nano-actuated magnetomechanical systems and nanowires for domain-wall manipulation. The review also covers interesting results observed in Fe-based and alloyed nanodeposits. Advantages and disadvantages of FEBID for the growth of magnetic nanostructures are discussed in the article as well as possible future directions in this field., Financial support by several projects is acknowledged: MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R and MAT2015-69725-REDT from MINECO (including FEDER funding), CELINA COST Action CM1301, Aragón Regional Government through project E26, FP7 Marie Curie Fellowship 3DMAGNANOW, EPSRC Early Career Fellowship EP/M008517/1 and Winton Fellowship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

All-carbon electrode molecular electronic devices based on Langmuir–Blodgett monolayers

  • Sangiao, S.
  • Martín, Santiago
  • González-Orive, Alejandro
  • Magén, César
  • Low, Paul J.
  • Teresa, José María de
  • Cea, Pilar
Nascent molecular electronic devices, based on monolayer Langmuir–Blodgett films sandwiched between two carbonaceous electrodes, have been prepared. Tightly packed monolayers of 4-((4-((4-ethynylphenyl)ethynyl)phenyl)ethynyl)benzoic acid are deposited onto a highly oriented pyrolytic graphite electrode. An amorphous carbon top contact electrode is formed on top of the monolayer from a naphthalene precursor using the focused electron beam induced deposition technique. This allows the deposition of a carbon top-contact electrode with well-defined shape, thickness, and precise positioning on the film with nm resolution. These results represent a substantial step toward the realization of integrated molecular electronic devices based on monolayers and carbon electrodes., This work was supported by the Ministerio de Ciencia e Innovación from Spain in the framework of grants CTQ2013-50187-EXP, MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R, MAT2015-69725-REDT from MINECO (including FEDER funding) and CELINA COST Action CM1301. S.M and P.C. also acknowledge MINECO and FEDER funding for the MAT2016-78257-R grant. Financial support from DGA/Fondos Feder (Construyendo Europa desde Aragón) is also acknowledged by research group Platon (E-54) and Magna (E-26). P.J.L. holds an ARC Future Fellowship (Grant No. FT120100073) and gratefully acknowledges funding for this work from the ARC (Grant No. DP140100855)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Competition between Superconductor – Ferromagnetic stray magnetic fields in YBa2Cu3O7−x films pierced with Co nano-rods

  • Rouco, Víctor
  • Córdoba, Rosa
  • Teresa, José María de
  • Rodríguez, Luis A.
  • Navau, Carles
  • Del Valle, Nuria
  • Via, G.
  • Sánchez, A.
  • Monton, Carlos M.
  • Kronast, Florian
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Palau, Anna
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC) - ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors., This work has been supported by Spanish MINECO and FEDER (MAT2014-51778-C2-1R, CSD2007-0041, MAT2014-51982-C2-1-R and MAT2015-69725-REDT, MAT2016-79426-P), Severo Ochoa SEV2015-0496 program, Generalitat de Catalunya (2014-SGR-00753, 2014-SGR-150, 2014-PROD00059), Aragon regional government projects, including FEDER funding, European Seventh Framework Program (FP7/2007-2013) under grant agreement 312284, EU-NMP-LA-2012-280432 EUROTAPES project and Cost Actions MP1201 and CM1301 (CELINA). A. Sanchez acknowledges a grant from ICREA Academia, funded by the Generalitat de Catalunya. We are grateful to I. Rivas and R. Valero from LMA-INA (Zaragoza, Spain) for experimental help in the cobalt growth and Ar+ milling processes, and Dr C. Magén and Dr. P. Algarabel from LMA-INA (Zaragoza, Spain) for facilitating the use of their high performance computing server to perform the micromagnetic simulations. We acknowledge R. Morales from UPV/EHU and Ikerbasque, A. Fernández-Pacheco from U. Cambridge and S. Valencia from Helmholtz-Zentrum, Berlin for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical and structural analysis of sub-20 nm graphene patterns generated by scanning probe lithography

  • Dago, Arancha I.
  • Sangiao, S.
  • Fernández-Pacheco, Rodrigo
  • Teresa, José María de
  • García García, Ricardo
Sub-20 nm patterns have been fabricated by using oxidation scanning probe lithography on epitaxial graphene. The structural and chemical properties of these nanopatterns have been characterized by high resolution transmission electron microscopy, energy dispersive X-ray spectroscopy and electron energy loss spectroscopy. The electron microscopy images reveal that the nanolithography process modifies the graphene monolayer and a thin region of the SiC substrate (1 nm thick). Spatially-resolved electron spectroscopies show that the nanopatterns are made of graphene oxide. The combination of spatially-resolved structural and chemical analysis of graphene nanopatterns will enable the development of high-performance graphene devices., Financial support by several projects are acknowledged: MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R and MAT2015-69725-REDT, MAT2016-76507-R from MINECO (including FEDER funding) and Aragón Regional Government. This work was also funded by the European Union FP7/2007-2013 under Grant Agreement No. 318804 (SNM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Reconfigurable magnetic domain-wall device: Fabrication and simulations

  • Hierro-Rodríguez, Aurelio
  • Álvarez-Prado, L. M.
  • Vélez, María
  • Martín, José Ignacio
  • Alameda, J. M.
  • Teixeira, J. M.
  • Araújo, J. P.
Resumen del trabajo presentado a la 43rd International Conference on Micro and Nano Engineering (MNE), celebrada en Braga (Portugal) del 18 al 22 de septiembre de 2017., The design of ultra-dense, low-cost and low-power technologies is one of the current challenges belonging to future Nanoscience and Nanotechnology breakthroughs. They represent advances which can qualitatively improve Information Technologies and strongly impact in the nowadays society. Among other important topics, the research on novel magnetic systems is a key factor to successfully accomplish these challenges. In this framework the present work moves in the direction of reconfigurable magnetic devices: systems where the response of the device can be controlled through an external agent. In the present work, a hybrid device based on the racetrack idea, is micromagnetically simulated and fabricated to control the propagation of domain walls (DW) through a Magnetic Nanowire (MNW). Simulations are performed using the Mumax3 code, and the system is fabricated by multilevel electron beam lithography procedures. A 75000x500x12 nm3 Co MNW is defined in contact with a μm diameter disc. The later acts as the magnetic domain nucleation region for the MNW. Disc shaped structures with 3 μm in diameter are defined in a different lithography step around the MNW. These discs are fabricated with amorphous NdCo5, a weak Perpendicular Magnetic Anisotropy (PMA) material. To allow magnetoresistive characterization, six Cu paths are defined in the last fabrication step on top of the previously fabricated system. The key factor for the novel functionality (“Reconfigurability”) of the proposed device is the difference between the magnetic properties of the weak PMA elements and the MNW. Specifically, the larger coercive field exhibited by the NdCo5 discs allows the DW propagation by the application of biasing fields and/or polarized currents through the MNW, without changing their magnetization configuration. In this way, the discs present a non-volatile memory which can be pre-configured by changing the magnetic history. Depending on the magnetic state recorded in the discs, different magnetostatic fields are present in the vicinity of the MNW locally leading to controllable pinning effects acting on the DW. The simulation results show that the proposed device is sensitive to the chirality of the Néel transverse DWs leading to filtering/rectifying capabilities., Work supported by Portuguese FCT (grant PTDC/FIS/119027/2010 (FCOMP-01-0124-FEDER-020713)), by Spanish MINECO (grants FIS2013-45469 and FIS2016-76058 (AEI/FEDER, EU)) and by Spanish Nanolito Network (MAT2015-69725-REDT). A. Hierro-Rodriguez acknowledges support from FCT of Portugal (Grant No. SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NanoSQUID magnetometry on individual as-grown and annealed Co nanowires at variable temperature

  • Martínez Pérez, M. J.
  • Pablo-Navarro, Javier
  • Müller, B.
  • Kleiner, R.
  • Magén, César
  • Koelle, D.
  • Teresa, José María de
  • Sesé Monclús, Javier
Performing magnetization studies on individual nanoparticles is a highly demanding task, especially when measurements need to be carried out under large sweeping magnetic fields or variable temperature. Yet, characterization under varying ambient conditions is paramount in order to fully understand the magnetic behavior of these objects, e.g., the formation of nonuniform states or the mechanisms leading to magnetization reversal and thermal stability. This, in turn, is necessary for the integration of magnetic nanoparticles and nanowires into useful devices, e.g., spin-valves, racetrack memories, or magnetic tip probes. Here, we show that nanosuperconducting quantum interference devices based on high critical temperature superconductors are particularly well suited for this task. We have successfully characterized a number of individual Co nanowires grown through focused electron beam induced deposition and subsequently annealed at different temperatures. Magnetization measurements performed under sweeping magnetic fields (up to ∼100 mT) and variable temperature (1.4-80 K) underscore the intrinsic structural and chemical differences between these nanowires. These point to significant changes in the crystalline structure and the resulting effective magnetic anisotropy of the nanowires, and to the nucleation and subsequent vanishing of antiferromagnetic species within the nanowires annealed at different temperatures., This work was partly funded and supported by the Spanish MINECO (MAT2014-51982-C2, MAT2015-73914-JIN, MAT2015-64083-R, MAT2015-69725-REDT, MAT2017-82970-C2-1-R, and MAT2017-82970-C2-2-R), the Aragón Regional Government through projects E26, E09_17R, and E13_17R (Construyendo Europa desde Aragón), COST Action CA16218, COST Project CELINA, and the Deutsche Forschungsgemeinschaft via project KO 1301/13-2. J.P.-N. grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores of the Spanish MINECO (BOE 12/06/15) with the participation of the European Social Fund. B.M. gratefully acknowledges support by the German Academic Scholarship Foundation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transmission XMCD-PEEM imaging of an engineered vertical FEBID cobalt nanowire with a domain wall

  • Wartelle, A.
  • Pablo-Navarro, Javier
  • Staňo, M.
  • Bochmann, S.
  • Pairis, S.
  • Rioult, M.
  • Thirion, C.
  • Belkhou, R.
  • Teresa, José María de
  • Magén, César
  • Fruchart, Olivier
Using focused electron-beam-induced deposition, we fabricate a vertical, platinum-coated cobalt nanowire with a controlled three-dimensional structure. The latter is engineered to feature bends along the height: these are used as pinning sites for domain walls, which are obtained at remanence after saturation of the nanostructure in a horizontally applied magnetic field. The presence of domain walls is investigated using x-ray magnetic circular dichroism (XMCD) coupled to photoemission electron microscopy (PEEM). The vertical geometry of our sample combined with the low incidence of the x-ray beam produce an extended wire shadow which we use to recover the wire's magnetic configuration. In this transmission configuration, the whole sample volume is probed, thus circumventing the limitation of PEEM to surfaces. This article reports on the first study of magnetic nanostructures standing perpendicular to the substrate with XMCD-PEEM. The use of this technique in shadow mode enabled us to confirm the presence of a domain wall without direct imaging of the nanowire., This work was supported by Spanish Ministry of Economy and Competitivity through projects No. MAT2014-51982C2-1-R, MAT2014-51982C2-2-R and MAT2015-69725-REDT, including FEDER funds, and by the Aragon Regional Government (Construyendo Europa desde Aragón) through project E26, with FEDER funding. Javier Pablo-Navarro grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretaría de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness (MINECO) with the participation of the European Social Fund. Michal Staňo acknowledges grant from the Laboratoire d’excellence LANEF in Grenoble (ANR10-LABX-51-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functionalized Akiyama tips for magnetic force microscopy measurements

  • Stiller, Markus
  • Barzola-Quiquia, José
  • Esquinazi, Pablo D.
  • Sangiao, S.
  • Teresa, José María de
  • Meijer, Jan
  • Abel, Bernd
In this work we have used focused electron beam induced deposition of cobalt to functionalize atomic force microscopy Akiyama tips for application in magnetic force microscopy. The grown tips have a content of  ≈90~\% Co after exposure to ambient air. The magnetic tips were characterized using energy dispersive x-ray spectroscopy and scanning electron microscopy. In order to investigate the magnetic properties, current loops were prepared by electron beam lithography. Measurements at room temperature as well as 4.2 K were carried out and the coercive field of  ≈6.8 mT of the Co tip was estimated by applying several external fields in the opposite direction of the tip magnetization. Magnetic Akiyama tips open new possibilities for wide-range temperature magnetic force microscopy measurements., This work was supported by the European Cooperation in Science and Technology (COST) through COST Action CM1301, 'Chemistry for Electron-Induced Nanofabrication' (CELINA), by the DFG through the Collaborative Research Center SFB 762 'Functionality of Oxide Interfaces' and by the DFG-ES86/29-1. This work was supported by the Spanish Ministry of Economy and Competitivity through projects No. MAT2014-51982-C2-1-R and MAT2015-69725-REDT (including FEDER funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic properties of optimized cobalt nanospheres grown by focused electron beam induced deposition (FEBID) on cantilever tips

  • Sangiao, S.
  • Magén, César
  • Mofakhami, Darius
  • Loubens, Grégoire de
  • Teresa, José María de
In this work, we present a detailed investigation of the magnetic properties of cobalt nanospheres grown on cantilever tips by focused electron beam induced deposition (FEBID). The cantilevers are extremely soft and the cobalt nanospheres are optimized for magnetic resonance force microscopy (MRFM) experiments, which implies that the cobalt nanospheres must be as small as possible while bearing high saturation magnetization. It was found that the cobalt content and the corresponding saturation magnetization of the nanospheres decrease for nanosphere diameters less than 300 nm. Electron holography measurements show the formation of a magnetic vortex state in remanence, which nicely agrees with magnetic hysteresis loops performed by local magnetometry showing negligible remanent magnetization. As investigated by local magnetometry, optimal behavior for high-resolution MRFM has been found for cobalt nanospheres with a diameter of ≈200 nm, which present atomic cobalt content of ≈83 atom % and saturation magnetization of 106 A/m, around 70% of the bulk value. These results represent the first comprehensive investigation of the magnetic properties of cobalt nanospheres grown by FEBID for application in MRFM., This work was supported by Spanish Ministry of Economy and Competitivity through projects No. MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R and MAT2015-69725-REDT (including FEDER funds), by the Aragon Regional Government, and by EU (Cost Action CM1301- CELINA and ESTEEM2 projects)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Proximity-induced superconductivity in bismuth nanostripes

  • Sangiao, S.
  • Casado, Laura
  • Morellón, Luis
  • Ibarra, M. Ricardo
  • Teresa, José María de
We show here that superconductivity can be induced in bismuth nanostripes through electrical contact with an s-wave superconductor. By studying the electrical transport properties of devices containing a bismuth nanostripe with superconducting contacts, we have found that bismuth nanostripes with inner probe distance shorter than 125 nm become superconductor at temperatures above 2 K due to proximity-induced superconductivity. This finding, along with previously demonstrated large spin–orbit coupling in bismuth, opens the way to the design of bismuth-based nanostructures bearing Majorana bound states., Financial support by several projects is acknowledged: MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R and MAT2015-69725-REDT from MINECO (including FEDER funding) and Aragón Regional Government through project E26—Construyendo Europa desde Aragón., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Suspended tungsten-based nanowires with enhanced mechanical properties grown by focused ion beam induced deposition

  • Córdoba, Rosa
  • Lorenzoni, Matteo
  • Pablo-Navarro, Javier
  • Magén, César
  • Perez Murano, Francesc X.
  • Teresa, José María de
The implementation of three-dimensional (3D) nano-objects as building blocks for the next generation of electro-mechanical, memory and sensing nano-devices is at the forefront of technology. The direct writing of functional 3D nanostructures is made feasible by using a method based on focused ion beam induced deposition (FIBID). We use this technique to grow horizontally suspended tungsten nanowires and then study their nano-mechanical properties by three-point bending method with atomic force microscopy. These measurements reveal that these nanowires exhibit a yield strength up to 12 times higher than that of the bulk tungsten, and near the theoretical value of 0.1 times the Young's modulus (E). We find a size dependence of E that is adequately described by a core-shell model, which has been confirmed by transmission electron microscopy and compositional analysis at the nanoscale. Additionally, we show that experimental resonance frequencies of suspended nanowires (in the MHz range) are in good agreement with theoretical values. These extraordinary mechanical properties are key to designing electro-mechanically robust nanodevices based on FIBID tungsten nanowires., This work was supported by the financial support from Spanish Ministry of Economy and Competitiveness through the projects CSD2010-00024, MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R, TEC2015-69864-R, MAT2015-69725-REDT (including FEDER funding) and from regional Gobierno de Aragón through project E26 with European Social Fund and COST-Celina project. R C acknowledges Juan de la Cierva-Incorporación 2014 program. J P-N grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretaría de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness (MINECO) with the participation of the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning shape, composition and magnetization of 3D cobalt nanowires grown by focused electron beam induced deposition (FEBID)

  • Pablo-Navarro, Javier
  • Sanz-Hernández, Dédalo
  • Magén, César
  • Fernández-Pacheco, Amalio
  • Teresa, José María de
Electron beam induced deposition of 3D cobalt nanowires with simultaneous high metallic content (≈80% at.) and small diameter (<100 nm) has been achieved by optimization of the growth parameters. Two different growth modes have been identified, denoted as radial and linear. In the radial mode, the wire diameter is at least ≈120 nm and the Co content is greater than ≈85% at. In the linear mode, the diameter is smaller than 80 nm and the Co content is at best ≈80% at. A sharp transition between both growth modes can occur inside a single nanowire for certain experimental conditions. Electron holography measurements indicate that in optimized Co nanowires the magnetic induction is high enough for applications in spintronics, magnetic sensing and actuation at the nanoscale., This work was supported by the Spanish Ministry of Economy and Competitivity through projects No. MAT2014-51982C2-1-R, MAT2014-51982C2-2-R and MAT2015-69725-REDT, including FEDER funds and by the Aragon Regional Government (Construyendo Europa desde Aragón) through project E26, with FEDER funding. This work was conducted within the framework of the COST Action CM1301 (CELINA). AFP acknowledges funding from a EPSRC Early Career Fellowship EP/M008517/1 and from a Winton Fellowship. In order to comply with EPSRC policy on research data, all metadata associated to this publication can be accessed via https://doi. org/10.17863/CAM.8106. JP-N grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretaría de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness (MINECO) with the participation of the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diameter modulation of 3D nanostructures in focused electron beam induced deposition using local electric fields and beam defocus

  • Pablo-Navarro, Javier
  • Sangiao, S.
  • Magén, César
  • Teresa, José María de
Focused electron beam induced deposition (FEBID) is a leading nanolithography technique in terms of resolution and the capability for three-dimensional (3D) growth of functional nanostructures. However, FEBID still presents some limitations with respect to the precise control of the dimensions of the grown nano-objects as well as its use on insulating substrates. In the present work, we overcome both limitations by employing electrically-biased metal structures patterned on the surface of insulating substrates. Such patterned metal structures serve for charge dissipation and also allow the application of spatially-dependent electric fields. We demonstrate that such electric fields can dramatically change the dimensions of the growing 3D nanostructures by acting on the primary electron beam and the generated secondary electrons. In the performed experiments, the diameter of Pt-C and W-C vertical nanowires grown on quartz, MgO and amorphous SiO2 is tuned by application of moderate voltages (up to 200 V) on the patterned metal microstructures during growth, achieving diameters as small as 50 nm. We identify two competing effects arising from the generated electric fields: a slight change in the primary beam focus point and a strong action on the secondary electrons. Beam defocus is exploited to achieve the in situ modulation of the diameter of 3D FEBID structures during growth., Financial support from the Spanish Ministry of Economy and Competitiveness through the projects MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and MAT2015-69725-REDT, from the Aragon Regional Government (Construyendo Europa desde Aragón) through the project E13_17R with European Social Fund funding is acknowledged. JP-N grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretaría de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness with the participation of the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-range vortex transfer in superconducting nanowires

  • Córdoba, Rosa
  • Orús, Pablo
  • Jelić, Željko L.
  • Sesé Monclús, Javier
  • Ibarra, M. Ricardo
  • Guillamón, Isabel
  • Vieira, Sebastián
  • Palacios, Juan José
  • Suderow, Hermann
  • Milosević, Milorad V.
  • Teresa, José María de
Under high-enough values of perpendicularly-applied magnetic feld and current, a type-II superconductor presents a fnite resistance caused by the vortex motion driven by the Lorentz force. To recover the dissipation-free conduction state, strategies for minimizing vortex motion have been intensely studied in the last decades. However, the non-local vortex motion, arising in areas depleted of current, has been scarcely investigated despite its potential application for logic devices. Here, we propose a route to transfer vortices carried by non-local motion through long distances (up to 10 micrometers) in 50nm-wide superconducting WC nanowires grown by Ga+ Focused Ion Beam Induced Deposition. A giant non-local electrical resistance of 36Ω has been measured at 2K in 3μm-long nanowires, which is 40 times higher than signals reported for wider wires of other superconductors. This giant efect is accounted for by the existence of a strong edge confnement potential that hampers transversal vortex displacements, allowing the long-range coherent displacement of a single vortex row along the superconducting channel. Experimental results are in good agreement with numerical simulations of vortex dynamics based on the time-dependent Ginzburg-Landau equations. Our results pave the way for future developments on information technologies built upon single vortex manipulation in nano-superconductors., Tis work was supported by the fnancial support from Spanish Ministry of Economy and Competitiveness through the projects MAT2015-69725-REDT, MAT2017-82970-C2-1-R and MAT2017-82970-C2-2-R, PIE201760E027, including FEDER funding, FIS2017-84330-R, MDM-2014-0377, FIS2016-80434-P and the Fundación Ramón Areces, EU ERC (Grant Agreement No. 679080), COST Grant No. CA16128 and STSM Grant from COST Action CA16218, and from regional Gobierno de Aragón (grants E13_17R and E28_17R) with European Social Fund (Construyendo Europa desde Aragón) and Comunidad de Madrid through project Nanofrontmag-CM (Grant No. S2013/MIT-2850). R.C. acknowledges Juan de la Cierva-Incorporación 2014 program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Purified and crystalline three-dimensional electron-beam-induced deposits: The successful case of cobalt for high-performance magnetic nanowires

  • Pablo-Navarro, Javier
  • Magén, César
  • Teresa, José María de
Focused-electron-beam-induced deposition (FEBID) is considered the ultimate direct-write lithography technique for three-dimensional (3D) structures. However, it has not yet been possible to obtain 3D deposits by FEBID with the same purity and crystallinity of the corresponding bulk materials. In the present work, purified and crystalline 3D Co nanowires of diameter below 90 nm have been fabricated by ex situ high-vacuum annealing at 600 °C after FEBID growth. With an increase of the metallic content of the nanowires up to 95 atom %, the thermal annealing process induces recrystallization of the pseudoamorphous as-grown structure into bulklike, hexagonal-closest-packed, and face-centered-cubic crystallites with lateral sizes comparable to the nanowire’s width. The net magnetization increases 80% with respect to the as-grown values, up to 1.61 ± 0.06 T, near bulk Co. This achievement opens new pathways for applications of this synthetic method in the fabrication of either individual or arrays of 3D high-purity and crystalline Co nanowires for high-density memory and logic devices, nanosensors, and actuators, and could be a viable method to obtain other pure and crystalline 3D materials by FEBID., All authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through Projects MAT2014-51982-C2, MAT2015-69725-REDT and MAT2017-82970-C2, from the COST Project CELINA, and from the Aragon Regional Government (Construyendo Europa desde Aragón) through Project E26 with European Social Fund funding. A grant to J.P.-N. was funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretarı́a de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness with participation of the European Social Fund., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Origin of inverse Rashba-Edelstein effect detected at the Cu/Bi interface using lateral spin valves

  • Isasa, M.
  • Martínez-Velarte, M.C.
  • Villamor, E.
  • Magén, C.
  • Morellón, L.
  • De Teresa, J.M.
  • Ibarra, M.R.
  • Vignale, G.
  • Chulkov, E.V.
  • Krasovskii, E.E.
  • Hueso, L.E.
  • Casanova, F.
The spin transport and spin-to-charge current conversion properties of bismuth are investigated using permalloy/copper/bismuth (Py/Cu/Bi) lateral spin valve structures. The spin current is strongly absorbed at the surface of Bi, leading to ultrashort spin-diffusion lengths. A spin-to-charge current conversion is measured, which is attributed to the inverse Rashba-Edelstein effect at the Cu/Bi interface. The spin-current-induced charge current is found to change direction with increasing temperature. A theoretical analysis relates this behavior to the complex spin structure and dispersion of the surface states at the Fermi energy. The understanding of this phenomenon opens novel possibilities to exploit spin-orbit coupling to create, manipulate, and detect spin currents in two-dimensional systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Competition between Superconductor-Ferromagnetic stray magnetic fields in YBa2Cu3O7-x films pierced with Co nano-rods

  • Rouco, V.
  • Córdoba, R.
  • De Teresa, J.M.
  • Rodríguez, L.A.
  • Navau, C.
  • Del-Valle, N.
  • Via, G.
  • Sánchez, A.
  • Monton, C.
  • Kronast, F.
  • Obradors, X.
  • Puig, T.
  • Palau, A.
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-Temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC)-ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-Trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Review of magnetic nanostructures grown by focused electron beam induced deposition (FEBID)

  • De Teresa, J. M.
  • Fernández-Pacheco, A.
  • Córdoba, R.
  • Serrano-Ramón, L.
  • Sangiao, S.
  • Ibarra, M. R.
We review the current status of the use of focused electron beam induced deposition (FEBID) for the growth of magnetic nanostructures. This technique relies on the local dissociation of a precursor gas by means of an electron beam. The most promising results have been obtained using the Co2(CO)8 precursor, where the Co content in the grown nanodeposited material can be tailored up to more than 95 at.%. Functional behaviour of these Co nanodeposits has been observed in applications such as arrays of magnetic dots for information storage and catalytic growth, magnetic tips for scanning probe microscopes, nano-Hall sensors for bead detection, nano-actuated magnetomechanical systems and nanowires for domain-wall manipulation. The review also covers interesting results observed in Fe-based and alloyed nanodeposits. Advantages and disadvantages of FEBID for the growth of magnetic nanostructures are discussed in the article as well as possible future directions in this field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

All-Carbon Electrode Molecular Electronic Devices Based on Langmuir–Blodgett Monolayers

  • Sangiao, S.
  • Martín, S.
  • González-Orive, A.
  • Magén, C.
  • Low, P.J.
  • De Teresa, J.M.
  • Cea, P.
Nascent molecular electronic devices, based on monolayer Langmuir–Blodgett films sandwiched between two carbonaceous electrodes, have been prepared. Tightly packed monolayers of 4-((4-((4-ethynylphenyl)ethynyl)phenyl)ethynyl)benzoic acid are deposited onto a highly oriented pyrolytic graphite electrode. An amorphous carbon top contact electrode is formed on top of the monolayer from a naphthalene precursor using the focused electron beam induced deposition technique. This allows the deposition of a carbon top-contact electrode with well-defined shape, thickness, and precise positioning on the film with nm resolution. These results represent a substantial step toward the realization of integrated molecular electronic devices based on monolayers and carbon electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic properties of optimized cobalt nanospheres grown by focused electron beam induced deposition (FEBID) on cantilever tips

  • Sangiao, S.
  • Magén, C.
  • Mofakhami, D.
  • de Loubens, G.
  • De Teresa, J.M.
In this work, we present a detailed investigation of the magnetic properties of cobalt nanospheres grown on cantilever tips by focused electron beam induced deposition (FEBID). The cantilevers are extremely soft and the cobalt nanospheres are optimized for magnetic resonance force microscopy (MRFM) experiments, which implies that the cobalt nanospheres must be as small as possible while bearing high saturation magnetization. It was found that the cobalt content and the corresponding saturation magnetization of the nanospheres decrease for nanosphere diameters less than 300 nm. Electron holography measurements show the formation of a magnetic vortex state in remanence, which nicely agrees with magnetic hysteresis loops performed by local magnetometry showing negligible remanent magnetization. As investigated by local magnetometry, optimal behavior for high-resolution MRFM has been found for cobalt nanospheres with a diameter of ˜200 nm, which present atomic cobalt content of ˜83 atom % and saturation magnetization of 106 A/m, around 70% of the bulk value. These results represent the first comprehensive investigation of the magnetic properties of cobalt nanospheres grown by FEBID for application in MRFM.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning shape, composition and magnetization of 3D cobalt nanowires grown by focused electron beam induced deposition (FEBID)

  • Pablo-Navarro, J.
  • Sanz-Hernández, D.
  • Magén, C.
  • Fernández-Pacheco, A.
  • De Teresa, J.M.
Electron beam induced deposition of 3D cobalt nanowires with simultaneous high metallic content (˜80% at.) and small diameter (<100 nm) has been achieved by optimization of the growth parameters. Two different growth modes have been identified, denoted as radial and linear. In the radial mode, the wire diameter is at least ˜120 nm and the Co content is greater than ˜85% at. In the linear mode, the diameter is smaller than 80 nm and the Co content is at best ˜80% at. A sharp transition between both growth modes can occur inside a single nanowire for certain experimental conditions. Electron holography measurements indicate that in optimized Co nanowires the magnetic induction is high enough for applications in spintronics, magnetic sensing and actuation at the nanoscale.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Functionalized Akiyama tips for magnetic force microscopy measurements

  • Stiller, M.
  • Barzola-Quiquia, J.
  • Esquinazi, P.D.
  • Sangiao, S.
  • De Teresa, J.M.
  • Meijer, J.
  • Abel, B.
In this work we have used focused electron beam induced deposition of cobalt to functionalize atomic force microscopy Akiyama tips for application in magnetic force microscopy. The grown tips have a content of ˜90 % Co after exposure to ambient air. The magnetic tips were characterized using energy dispersive x-ray spectroscopy and scanning electron microscopy. In order to investigate the magnetic properties, current loops were prepared by electron beam lithography. Measurements at room temperature as well as 4.2 K were carried out and the coercive field of ˜6.8 mT of the Co tip was estimated by applying several external fields in the opposite direction of the tip magnetization. Magnetic Akiyama tips open new possibilities for wide-range temperature magnetic force microscopy measurements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemical and structural analysis of sub-20 nm graphene patterns generated by scanning probe lithography

  • Dago, A.I.
  • Sangiao, S.
  • Fernández-Pacheco, R.
  • De Teresa, J.M.
  • Garcia, R.
Sub-20 nm patterns have been fabricated by using oxidation scanning probe lithography on epitaxial graphene. The structural and chemical properties of these nanopatterns have been characterized by high resolution transmission electron microscopy, energy dispersive X-ray spectroscopy and electron energy loss spectroscopy. The electron microscopy images reveal that the nanolithography process modifies the graphene monolayer and a thin region of the SiC substrate (1 nm thick). Spatially-resolved electron spectroscopies show that the nanopatterns are made of graphene oxide. The combination of spatially-resolved structural and chemical analysis of graphene nanopatterns will enable the development of high-performance graphene devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Transmission XMCD-PEEM imaging of an engineered vertical FEBID cobalt nanowire with a domain wall

  • Wartelle, A.
  • Pablo-Navarro, J.
  • Stano, M.
  • Bochmann, S.
  • Pairis, S.
  • Rioult, M.
  • Thirion, C.
  • Belkhou, R.
  • Teresa, J.M.D.
  • Magén, C.
  • Fruchart, O.
Using focused electron-beam-induced deposition, we fabricate a vertical, platinum-coated cobalt nanowire with a controlled three-dimensional structure. The latter is engineered to feature bends along the height: these are used as pinning sites for domain walls, which are obtained at remanence after saturation of the nanostructure in a horizontally applied magnetic field. The presence of domain walls is investigated using x-ray magnetic circular dichroism (XMCD) coupled to photoemission electron microscopy (PEEM). The vertical geometry of our sample combined with the low incidence of the x-ray beam produce an extended wire shadow which we use to recover the wire''s magnetic configuration. In this transmission configuration, the whole sample volume is probed, thus circumventing the limitation of PEEM to surfaces. This article reports on the first study of magnetic nanostructures standing perpendicular to the substrate with XMCD-PEEM. The use of this technique in shadow mode enabled us to confirm the presence of a domain wall without direct imaging of the nanowire.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

NanoSQUID Magnetometry on Individual As-grown and Annealed Co Nanowires at Variable Temperature

  • Martínez-Pérez, M.J.
  • Pablo-Navarro, J.
  • Müller, B.
  • Kleiner, R.
  • Magén, C.
  • Koelle, D.
  • De Teresa, J.M.
  • Sesé, J.
Performing magnetization studies on individual nanoparticles is a highly demanding task, especially when measurements need to be carried out under large sweeping magnetic fields or variable temperature. Yet, characterization under varying ambient conditions is paramount in order to fully understand the magnetic behavior of these objects, e.g., the formation of nonuniform states or the mechanisms leading to magnetization reversal and thermal stability. This, in turn, is necessary for the integration of magnetic nanoparticles and nanowires into useful devices, e.g., spin-valves, racetrack memories, or magnetic tip probes. Here, we show that nanosuperconducting quantum interference devices based on high critical temperature superconductors are particularly well suited for this task. We have successfully characterized a number of individual Co nanowires grown through focused electron beam induced deposition and subsequently annealed at different temperatures. Magnetization measurements performed under sweeping magnetic fields (up to 100 mT) and variable temperature (1.4-80 K) underscore the intrinsic structural and chemical differences between these nanowires. These point to significant changes in the crystalline structure and the resulting effective magnetic anisotropy of the nanowires, and to the nucleation and subsequent vanishing of antiferromagnetic species within the nanowires annealed at different temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Long-range vortex transfer in superconducting nanowires

  • Córdoba, Rosa
  • Orús, Pablo
  • Jelic, Željk L.
  • Sesé, Javier
  • Ibarra, Manuel Ricardo
  • Guillamón, Isabel
  • Vieira, Sebastián
  • Palacios, Juan José
  • Suderow, Hermann
  • Milosevic, Milorad V.
  • De Teresa, José María
Under high-enough values of perpendicularly-applied magnetic field and current, a type-II superconductor presents a finite resistance caused by the vortex motion driven by the Lorentz force. To recover the dissipation-free conduction state, strategies for minimizing vortex motion have been intensely studied in the last decades. However, the non-local vortex motion, arising in areas depleted of current, has been scarcely investigated despite its potential application for logic devices. Here, we propose a route to transfer vortices carried by non-local motion through long distances (up to 10 micrometers) in 50 nm-wide superconducting WC nanowires grown by Ga+ Focused Ion Beam Induced Deposition. A giant non-local electrical resistance of 36 O has been measured at 2 K in 3 µm-long nanowires, which is 40 times higher than signals reported for wider wires of other superconductors. This giant effect is accounted for by the existence of a strong edge confinement potential that hampers transversal vortex displacements, allowing the long-range coherent displacement of a single vortex row along the superconducting channel. Experimental results are in good agreement with numerical simulations of vortex dynamics based on the time-dependent Ginzburg-Landau equations. Our results pave the way for future developments on information technologies built upon single vortex manipulation in nano-superconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Purified and crystalline three-dimensional electron-beam-induced deposits: the successful case of cobalt for high-performance magnetic nanowires

  • Pablo-Navarro, Javier
  • Magén, César
  • De Teresa, José María
Focused-electron-beam-induced deposition (FEBID) is considered the ultimate direct-write lithography technique for three-dimensional (3D) structures. However, it has not yet been possible to obtain 3D deposits by FEBID with the same purity and crystallinity of the corresponding bulk materials. In the present work, purified and crystalline 3D Co nanowires of diameter below 90 nm have been fabricated by ex situ high-vacuum annealing at 600 °C after FEBID growth. With an increase of the metallic content of the nanowires up to 95 atom %, the thermal annealing process induces recrystallization of the pseudoamorphous as-grown structure into bulklike, hexagonal-closest-packed, and face-centered-cubic crystallites with lateral sizes comparable to the nanowire’s width. The net magnetization increases 80% with respect to the as-grown values, up to 1.61 ± 0.06 T, near bulk Co. This achievement opens new pathways for applications of this synthetic method in the fabrication of either individual or arrays of 3D high-purity and crystalline Co nanowires for high-density memory and logic devices, nanosensors, and actuators, and could be a viable method to obtain other pure and crystalline 3D materials by FEBID.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Diameter modulation of 3D nanostructures in focused electron beam induced deposition using local electric fields and beam defocus

  • Pablo-Navarro, Javier
  • Sangiao, Soraya
  • Magén, César
  • De Teresa, José María
Focused electron beam induced deposition (FEBID) is a leading nanolithography technique in terms of resolution and the capability for three-dimensional (3D) growth of functional nanostructures. However, FEBID still presents some limitations with respect to the precise control of the dimensions of the grown nano-objects as well as its use on insulating substrates. In the present work, we overcome both limitations by employing electrically-biased metal structures patterned on the surface of insulating substrates. Such patterned metal structures serve for charge dissipation and also allow the application of spatially-dependent electric fields. We demonstrate that such electric fields can dramatically change the dimensions of the growing 3D nanostructures by acting on the primary electron beam and the generated secondary electrons. In the performed experiments, the diameter of Pt-C and W-C vertical nanowires grown on quartz, MgO and amorphous SiO2 is tuned by application of moderate voltages (up to 200 V) on the patterned metal microstructures during growth, achieving diameters as small as 50 nm. We identify two competing effects arising from the generated electric fields: a slight change in the primary beam focus point and a strong action on the secondary electrons. Beam defocus is exploited to achieve the in situ modulation of the diameter of 3D FEBID structures during growth.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Competition between superconductor, ferromagnetic stray magnetic fields in YBa2Cu3O7-x films pierced with Co nano-rods

  • Rouco Gómez, Víctor
  • Córdoba, R.
  • De Teresa, J. M.
  • Rodríguez, L. A.
  • Navau, Carles|||0000-0003-4763-5305
  • Valle, Nuria del|||0000-0003-2608-5009
  • Via, Guillem|||0000-0002-4789-1600
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Monton, Carlos
  • Kronast, F.
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Palau, Anna|||0000-0002-2217-164X
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC) - ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors.