Pasar al contenido principal

INTERACCION Y MANIPULACION DE DEFECTOS TOPOLOGICOS:SISTEMAS HIBRIDOS SUPERCONDUCTOR/MAGNETICO

FIS2013-45469-C4-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CISNE: An accurate description of dose-effect and synergism in combination therapies

  • García-Fuente, Amador
  • Vázquez, Fernando
  • Viéitez, José M.
  • García Alonso, F. J.
  • Martín, José Ignacio
  • Ferrer, Jaime
The precise determination of dose-effect curves and the combination effect of drugs is of crucial importance in the development of new therapies for the most dreadful diseases. We have found that the current implementations of the theory of Chou et al. are not accurate enough in some circumstances and might lead to erroneous predictions of synergistic or antagonistic behaviour. We have identified the source of inaccuracies and fixed it thereby improving the accuracy of those methods. Here we explain the main features of our approach and demonstrate its higher accuracy as compared to the standard methods. Therefore, this new implementation might have a huge impact in the reliability of future research on new Combination Therapies., This work was supported by FICYT (grant GRUPIN14-121) and by the Spanish MINECO (project FIS2013-45469)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymer porous thin films obtained by direct spin coating

  • Álvarez-Fernández, Alberto
  • Valdés-Bango, F.
  • Losada Ambrinos, Raquel
  • Martín, José Ignacio
  • Vélez, María
  • Alameda, J. M.
  • García Alonso, F. J.
Films of four different nanostructures, namely micelles, filled cylinders, ring-shaped porous nanostructures and hollow cylinders, can be prepared easily in a straightforward and simple way by spin coating onto a silicon plate toluene solutions of poly(styrene-block-4-vinylpyridine) copolymer containing formic acid of increasing concentration. Despite the enormous progress in preparation of porous polymers, most of them require multiple steps. In this sense, this method represents an effort to obtain not only porous thin films but also other bidimensional nanostructures in a very simple way. © 2017 Society of Chemical Industry., This work was supported by Spanish MINECO (FIS2013‐45469 and FIS2016‐76058 (AEI/FEDER,EU))., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Quantitative X-ray magnetic microscopy: from parallel stripe domains to buried topological defects

  • Vélez, María
  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Valdés-Bango, F.
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Alameda, J. M.
  • Hierro-Rodríguez, Aurelio
  • Duch Llobera, Marta
  • Torras Andrés, Núria
  • Esteve i Tintó, Jaume
  • Sorrentino, Andrea
  • Valcárcel, Ricardo
  • Pereiro, Eva
  • Ferrer, Salvador
Resumen del trabajo presentado al APS March Meeting, celebrado en Baltimore, Maryland (USA) del 14 al 18 de marzo de 2016., Magnetic transmission X-ray microscopy (TXM) is a powerful imaging technique that can produce element specific images of magnetic domains with nanometric lateral resolution. Here we present a novel imaging method in which the angular dependence of the magnetic contrast in a series of high resolution TXM images is used to obtain quantitative descriptions of the magnetization (canting angles and sense). This has been applied first to analyze parallel stripe domains in weak perpendicular anisotropy ferromagnetic NdCo5 layers of different thickness, and in NdCo5/Permalloy bilayers. Then, our method has been used to identify complex topological defects (merons or 1/2 skyrmions) in a NdCo5 film that are only partially replicated by the Permalloy overlayer. Meron propagation in trilayers (across the thickness) and in hexagonal networks (across bifurcations) will be discussed in terms of their topological characteristics (chirality and polarity)., Work supported by Spanish grant FIS2013-45469., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Frustration and topological defects in hexagonal networks with weak Perpendicular Magnetic Anisotropy

  • Valdés-Bango, F.
  • Vélez, María
  • Martín, José Ignacio
  • Álvarez-Prado, L. M.
  • Alameda, J. M.
Resumen del trabajo presentado al Joint European Magnetic Symposia (JEMS), celebrado en Glasgow (UK) del 21 al 26 de agosto de 2016., An artificial spin ice is an array of nanomagnets that exhibit frustrated magnetic states due mainly to their magnetostactic interactions, and so highly dependent on the lattice geometrical features, with typical lateral dimensions of hundreds of nanometers. Despite it has been a lot of effort over the past decade to construct and understand the static and dynamic behaviour of such systems on magnetical materials with in-plane anisotropy (e.g. permalloy or cobalt) few has been explored on out-of-plane anisotropic materials. In our experiment, we study this through amorphous alloy NdCo5 which exhibits an stripe phase weak out-of-plane domain behaviour, that also allows us for a direct observation of magnetic domain reversal. Sets of continuous kagome lattices were fabricated by electron-beam lithography and further magnetron sputtering deposition. To analyze the role of the out-of-plane anisotropy, a 65 nm thick NdCo5 layer and an analogous 40nm thick Co sample were deposited. To avoid edge effects and to guarantee enough number of elements lattices, the size of the array area is over 200x200 μm2. In order to study size related effects branch width was varied in the range 0.3-3 μm and three increasing length/widht aspect ratios were studied for each case. Magnetic behaviour was characterized by Magnetic Force Microscopy and Magneto-Optical Kerr Effect and a set of micromagnetic simulations were launched to support the observations. Different kinds of topological defects are found to nucleate in these hexagonal networks depending on bar aspect ratio and width in comparison with stripe domain spatial periodicity, and on magnetic history. For bar widths below 400 nm a spin ice regime is found after out of plane demagnetization. The interplay between shape anisotropy, rotatable anisotropy, size effects and geometrical frustration will be discussed in order to understand the experimental results., Work supported by Spanish MINECO (FIS2013-45469)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Asymmetric merons at room temperature: experiments and simulations

  • Álvarez-Prado, L. M.
  • Hierro-Rodríguez, Aurelio
  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Sorrentino, Andrea
  • Martín, José Ignacio
  • Alameda, J. M.
  • Pereiro, Eva
  • Vélez, María
  • Ferrer, Salvador
Resumen del trabajo presentado al Joint European Magnetic Symposia (JEMS), celebrado en Glasgow (UK) del 21 al 26 de agosto de 2016., Topological defects are a key to understanding global properties in many different condensed matter systems with long range order. Although artificial skyrmion textures (with integer topological index Q = 1) have been imprinted in multilayers, related topological defects with fractional skymionic charge Q 0 1/2 (socalled merons) have also been described and observed. Actually meron textures bound to magnetic stripe domain pattern dislocation cores have been recently observed in weak perpendicular anisotropy NdCo/Py bilayers supporting a weak stripe domain pattern at equilibrium. In this work, we have extended our previous study by performing a detailed characterization of the 3D micromagnetic structure of meron textures in GdCo/NdCo/Py trilayers. Magnetic Transmission X-Ray microscopy (MTXM) at different sample orientations has been used to obtain the magnetic configration of the bottom/top/central layers around these merons, taking advantage os its long penetration depth to study buried layers and the possibility to obtain independently elements selective images of each layer magnetization. A detailed analysis shows that most merons appear either on top or bottom layers but not on both at the same time. This asymmetric indepth configuration follows strong selection rules based on defect topological characteristics which will be outlined and discussed in terms of micromagnetic simulations., Work supported by Spanish MINECO (FIS2013-45469, FC-15GRUPIN14-040) and FCT of Portugal (Grant SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Reconfigurable exchange bias-like effect in hybrid hard/soft patterned magnetic composites

  • Hierro-Rodríguez, Aurelio
  • Teixeira, J. M.
  • Rodríguez-Rodríguez, G.
  • Rubio, Honorino
  • Vélez, María
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Alameda, J. M.
Resumen del trabajo presentado al Joint European Magnetic Symposia (JEMS), celebrado en Glasgow (UK) del 21 al 26 de agosto de 2016., Reconfigurable magnetic systems are attracting growing interest due to their potential in the development of forefront magnetic devices. One way to dreate the reconfigurability is by applying external fields and/or changing the magnetic history of the system, controlling in this way, the dynamic and/or static magnetic behavior without changing the shapes/sizes of the structures. Here we present a hybrif 2D hard-soft composite fabricated by combining soft (Co73Si27) and hard (NdCo5) magnetic materials with in-plane and out-of-plane magnetic anisotropies, respectively. They have been microstructured in a square lattice of CoSi anti-dots with NdCo dots within the holes. The magnetic properties of the dots allow us to introduce a magnetostatic interactions between dot and anti-dot layers induce a completely reconfigurable exchange bias-like shift in the system's hysteresis loops. Two different regimes for this shift are present depending on the lattice parameter of the microstructures. For large values, dipolar magnetostatic decay is observed with a small bias field shift. For the smaller lattice parameter, the interaction between adjacent anti-dot's characteristic closure domain structures enhances the exchange bias-like effect., Wotk supported by Spanish MINECO (FIS2013-45469) and FCT of Portugal (Grants SFRH/BPD/90471/2012 and SFRH/BPD/72329/2010)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Asymmetric merons studied by magnetic transmission X-ray microscopy

  • Hierro-Rodríguez, Aurelio
  • Álvarez-Prado, L. M.
  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Sorrentino, Andrea
  • Martín, José Ignacio
  • Alameda, J. M.
  • Pereiro, Eva
  • Vélez, María
  • Ferrer, Salvador
Resumen del trabajo presentado a la 61st Annual Conference on Magnetism and Magnetic Materials, celebrada en New Orleans (USA) del 31 de octubre al 4 de noviembre de 2016., Meron textures are topological deffects with fractional skyrmionic charge Q = 1/2 that have been recently observed bound to magnetic stripe domain pattern dislocation cores in weak perpendicular anisotropy NdCo/Py bilayers supporting a weak stripe domain pattern at equilibrium. In this work, we go an step further by studying the in-depth transmission of merons in GdCo/NdCo(Py trilayers. Taking advantage of the element selectivity, long probing depth and magnetic sensitivity of sinchtroton based magnetic x-ray transmission microscopy, a detailed charcterization of the 3D topology of the merons formed in the system during the magnetization reversal process has been carried out. The results indicate an asymmetric confguration of merons across the thickness, as most merons appear either on top or bottom layers but not on both at the same time. This asymmetric propagation follows will be described and discussed., Wotk supported by Spanish MINECO (FIS2013-45469), Spanish FYCIT (FC-15GRUPIN14-040) and FCT of Portugal (Grants SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Reconfigurable magnetic domain-wall device: Fabrication and simulations

  • Hierro-Rodríguez, Aurelio
  • Álvarez-Prado, L. M.
  • Vélez, María
  • Martín, José Ignacio
  • Alameda, J. M.
  • Teixeira, J. M.
  • Araújo, J. P.
Resumen del trabajo presentado a la 43rd International Conference on Micro and Nano Engineering (MNE), celebrada en Braga (Portugal) del 18 al 22 de septiembre de 2017., The design of ultra-dense, low-cost and low-power technologies is one of the current challenges belonging to future Nanoscience and Nanotechnology breakthroughs. They represent advances which can qualitatively improve Information Technologies and strongly impact in the nowadays society. Among other important topics, the research on novel magnetic systems is a key factor to successfully accomplish these challenges. In this framework the present work moves in the direction of reconfigurable magnetic devices: systems where the response of the device can be controlled through an external agent. In the present work, a hybrid device based on the racetrack idea, is micromagnetically simulated and fabricated to control the propagation of domain walls (DW) through a Magnetic Nanowire (MNW). Simulations are performed using the Mumax3 code, and the system is fabricated by multilevel electron beam lithography procedures. A 75000x500x12 nm3 Co MNW is defined in contact with a μm diameter disc. The later acts as the magnetic domain nucleation region for the MNW. Disc shaped structures with 3 μm in diameter are defined in a different lithography step around the MNW. These discs are fabricated with amorphous NdCo5, a weak Perpendicular Magnetic Anisotropy (PMA) material. To allow magnetoresistive characterization, six Cu paths are defined in the last fabrication step on top of the previously fabricated system. The key factor for the novel functionality (“Reconfigurability”) of the proposed device is the difference between the magnetic properties of the weak PMA elements and the MNW. Specifically, the larger coercive field exhibited by the NdCo5 discs allows the DW propagation by the application of biasing fields and/or polarized currents through the MNW, without changing their magnetization configuration. In this way, the discs present a non-volatile memory which can be pre-configured by changing the magnetic history. Depending on the magnetic state recorded in the discs, different magnetostatic fields are present in the vicinity of the MNW locally leading to controllable pinning effects acting on the DW. The simulation results show that the proposed device is sensitive to the chirality of the Néel transverse DWs leading to filtering/rectifying capabilities., Work supported by Portuguese FCT (grant PTDC/FIS/119027/2010 (FCOMP-01-0124-FEDER-020713)), by Spanish MINECO (grants FIS2013-45469 and FIS2016-76058 (AEI/FEDER, EU)) and by Spanish Nanolito Network (MAT2015-69725-REDT). A. Hierro-Rodriguez acknowledges support from FCT of Portugal (Grant No. SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Three dimensional magnetic textures studied by angular dependent transmission X-ray magnetic microscopy

  • Hierro-Rodríguez, Aurelio
  • Quirós, Carlos
  • Sorrentino, Andrea
  • Álvarez-Prado, L. M.
  • Díaz, Javier
  • Valcárcel, Ricardo
  • Alameda, J. M.
  • Vélez, María
  • Martín, José Ignacio
  • Pereiro, Eva
  • Ferrer, Salvador
Resumen del trabajo presentado a la 62nd Annual Conference on Magnetism and Magnetic Materials (MMM), celebrada en Pittsburgh (USA) del 6 al 10 de noviembre de 2017., Transmission X-ray microscopy combined with circular magnetic dichroism allows to get insight in the 3D magnetic configuration of thinfilms or multilayers as reported in our previous works. In order to advance towards the development of 3D magnetic tomography as a tool to resolve the magnetization in relatively complex magnetic structures, we acquired images at different angles of incidence and measured their X-ray dichroic contrast. we fabricated trilayers, consisting of two permalloy (Py) films having a Cu spacer in between, to ivestigate the textures of the two Py layers. As shown in the figure, at oblique angles of incidence, white (top) and dark (bottom) triangular areas visible in image (a) that invert contrast in (c). They are due to Landau domains at the top Py layer which are superimposed to the stripe domains of the thicker Py layer at the bottom, which are most evident in image (b). This interpretation is sustained by the results of micromagnetic calculations displayed in (d) and (e)., Work supported by Spanish MINECO (grants FIS2013-45469 and FIS2016-76058 (AEI/FEDER,EU)) and by FICYT-Astrurias (FC-GRUPIN14-040). A. Hierro-Rodriguez acknowledges FCT of Portugal ( Grant SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Guided propagation of vortex - Antivortex pairs in permalloy/NdCo/GdCo trilayers

  • Hierro-Rodríguez, Aurelio
  • Quirós, Carlos
  • Sorrentino, Andrea
  • Valcárcel, Ricardo
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Alameda, J. M.
  • Pereiro, Eva
  • Vélez, María
  • Ferrer, Salvador
Resumen del trabajo presentado a la 62nd Annual Conference on Magnetism and Magnetic Materials (MMM), celebrada en Pittsburgh (USA) del 6 al 10 de noviembre de 2017., Correlated propagation of opposite polarity vortex-antivortex pairs has been obtained in magnetic trilayers combining soft magnetic layers (NiFe, GdCo) and weak perpendicular anisotropy (NdCo) materials. Stripe domains at the central NdCo layer provide both nucleation sites for reversed domains (at bifurcations within the periodic stripe pattern) and a confining potential with a preferred propagation direction. A detailed characterization by magnetic X-ray microscopy and micromagnetic simulations shows that reversed domains in the top NiFe layer nucleate at dislocation cores and expand by the propagation of opposite polarity vortex-antivortex pairs along the lines defined by the stripe pattern. Bifurcation geometry and stray field asymmetries restrict the possible vortexantivortex pairs at the top NiFe layer: vortices always nucleate at the central reversed stripe and, under the effect of an in-plane field, propagate in opposite senses depending on their polarity over μm long distances. This is a robust effect protected by the topological characteristics of stripe pattern dislocations and top/bottom closure domain asymmetry that may have practical applications. The possibility to tune vortex/antivortex chiralities by a proper choice of soft magnetic layers will also be discussed., Work supported by Spanish MINECO (FIS2013-45469 and FIS2016-76058 (AEI/FEDER,EU)) and by FICYT-Asturias (FC-GRUPIN14-040). A. Hierro-Rodriguez acknowledges support from FCT of Portugal (Grant SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Interacciones magnéticas en sistemas tierra rara-metal de transición y su estudio mediante técnicas de radiación sincrotrón, Magnetic interactions in rare earth - transition metal systems and their study by synchrotron radiation techniques

  • Blanco-Roldán, C.
Programa de Doctorado de Física de la Materia Condensada y Nanotecnología., En esta tesis se emplean, de manera intensiva, técnicas de caracterización experimental basadas en radiación sincrotrón para explorar las interacciones magnéticas de diferentes sistemas compuestos por elementos del grupo de las tierras raras y metales de transición (TR-MT), como son las aleaciones amorfas Gd-Co, Nd-Co, Dy-Co e Y-Co, conformadas como lámina continua, nanoestructuradas en forma de multicapa, o nanoestructuradas en diferentes geometrías mediante litografía por haz de electrones. Los sistemas TR-MT, de gran interés en el sector del almacenamiento y transmisión magnéticos de información, se caracterizan por poder presentar propiedades magnéticas como son una elevada anisotropía magnetocristalina perpendicular, una razonablemente intensa imanación, una alta temperatura de Curie, y la presencia de diferentes configuraciones entre los momentos magnéticos de la TR y el MT como consecuencia de la competición entre el canje y el campo cristalino aleatorio. Esta competición da lugar a configuraciones ferrimagnéticas y esperimagnéticas, dependiendo del momento orbital de la TR y de su acoplamiento (ferromagnético o antiferromagnético) con el MT. El balance energético entre la anisotropía magnética, el canje, la energía magnetostática y la energía Zeeman, cuando estas láminas delgadas son sometidas a un campo magnético externo, es estudiado a lo largo de los capítulos de esta tesis con el análisis de diferentes sistemas experimentales. Para ello, se han empleado numerosas técnicas de magnetometría y caracterización magnética convencionales, como la magnetometría por muestra vibrante (VSM), magnetometría de gradiente de campo alterno (AGM), magnetometría por dispositivo superconductor de interferencia cuántica (SQUID), efecto Kerr magneto-óptico, o la técnica de microscopía de fuerza magnética (MFM). Sin embargo, esta primera caracterización es completada con el uso de técnicas avanzadas de radiación sincrotrón, logrando obtener una mayor información acerca de los sistemas TR-MT, imposible de extraer con los anteriores métodos. Así, las técnicas sincrotrón, como son la dispersión magnética resonante (XRMS), el dicroísmo magnético circular (XMCD), y la microscopía de transmisión de rayos x (TXM), cobran gran importancia dentro de esta tesis, al presentar el potencial y capacidades de estas técnicas y ofrecer una descripción de su empleo y modo de análisis. De este modo, la tesis se compone de cuatro capítulos experimentales principales. El primero, tiene por objeto el estudio de multicapas compuestas por aleaciones de Gd-Co. La técnica de dispersión magnética resonante sirve para caracterizar el perfil de imanación de estas muestras, siendo sensible a la magnitud y variación en la orientación de los momentos magnéticos en profundidad, y mostrando los efectos de muelle de canje presentes con la aplicación de campo y observados, previamente mediante efecto Kerr magneto-óptico. A continuación, y siguiendo con el enfoque de resolución de momentos localizados, se lleva a cabo un estudio del magnetismo de muestras compuestas por una lámina continua de NdCo5 y bicapas NdCo5/Permalloy. Su estudio mediante microscopía de fuerza magnética y magnetometría de gradiente alterno es completado con la información angular de los momentos magnéticos de sus dominios de banda, cuya estimación solo es posible mediante microscopía de trasmisión de rayos x. Esta capacidad se muestra por primera vez en esta tesis. En el siguiente capítulo experimental, el patrón de bandas presente en el NdCo5 es truncado mediante la fabricación de microestructuras por litografía electrónica, explorando el uso de estos sistemas como circuitos magnéticos. En este marco, se han construido, además, estructuras tridimensionales en dos niveles mediante litografía electrónica, habiendo optimizado su proceso de fabricación y empleando en su caracterización técnicas como la microscopía de fuerza alterna o la microscopia por efecto Kerr. Por último, estas estructuras 3D, destinadas a su implementación como circuitos transmisores de información magnética, han mostrado su capacidad como elementos discriminadores de la propagación de los dominios magnéticos en microhilos según el signo del campo aplicado. Finalmente, en el último capítulo, se comienza el estudio de láminas continuas y multicapas de aleaciones amorfas de DyCo5, YCo5 y GdCo5, tanto por magnetometría por muestra vibrante y SQUID como por dicroísmo magnético circular, y se discuten las diferencias comparativas en su magnetismo debidas a la distinta tierra rara empleada además de a su distinta estructuración., Gracias al programa JAE Predoc del Consejo Superior de Investigaciones Científicas (CSIC), centro mixto de la Universidad de Oviedo, CSIC y Principado de Asturias que ha financiado la realización de esta tesis, haciendola posible. Agradezco también la financiación recibida desde el Ministerio de Ciencia e Innovación (MICINN) a través del proyecto FIS2008-062429, y desde el Ministerio de Economía y Competitividad (MINECO) mediante los proyectos FIS2013-45469 y FIS2016-76058., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Determination of the out-of-plane anisotropy contributions (first and second anisotropy terms) in amorphous Nd-Co thin films by micromagnetic numerical simulations

  • Álvarez-Prado, L. M.
  • Cid, Rosalía
  • Morales, Rafael
  • Díaz, Javier
  • Vélez, María
  • Rubio, Honorino
  • Hierro-Rodríguez, Aurelio
  • Alameda, J. M.
Amorphous Nd-Co thin films exhibit stripe shaped periodic magnetic domains with local out-of-plane magnetization components due to their perpendicular magnetic anisotropy. This anisotropy has been quantified in a fairly simple way by reproducing the experimental magnetization curves by means of micromagnetic numerical simulations. The simulations show that the first (K1) and second (K2) anisotropy constants must be used to properly describe the variation of the stripe domains with the in plane applied magnetic field. A strong temperature dependence of both K1 and K2 has been obtained between 10 K and room temperature. This anisotropy behavior is characteristic of two magnetically coupled 3d-4f sublattices with competing anisotropies., The authors acknowledge the financial support from Spanish MINECO under projects FIS2013-45469 and FIS2016-76058 (AEI/FEDER,UE). A. Hierro-Rodriguez acknowledge support from FCT of Portugal (Grant SFRH/BPD/90471/2012) and POPH/FSE programs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic order and disorder in nanomagnets probed by superconducting vortices

  • Rollano, Víctor
  • Valle, Javier del
  • Gómez, Alicia
  • Vélez, María
  • Álvarez-Prado, L. M.
  • Quirós, Carlos
  • Martín, José Ignacio
  • Osorio, M. R.
  • Granados, D.
  • González, Elvira M.
  • Vicent, J. L.
We have studied two nanomagnet systems with strong (Co/Pd multilayers) and weak (NdCo alloy films) stray magnetic fields by probing the out-of-plane magnetic states with superconducting vortices. The hybrid samples are made of array of nanomagnets embedded in superconducting Nb thin films. The vortex motion detects relevant magnetic state features, since superconducting vortices are able to discriminate between different magnetic stray field strengths and directions. The usual matching effect between the superconducting vortex lattice and the periodic pinning array can be quenched by means of disorder magnetic potentials with strong stray fields at random. Ordered stray fields retrieve the matching effect and yield asymmetry and shift in the vortex dissipation signal. Furthermore vortices can discriminate the sizes of the nanomagnet magnetic domains, detecting magnetic domain sizes as small as 70 nm. In addition, we observe that the vortex cores play the crucial role instead of the supercurrents around the vortex., We thank Spanish MINECO grants FIS2013-45469, FIS2016-76058 (AEI/FEDER, UE), Spanish CM grant S2013/MIT-2850. IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). DG acknowledges RYC-2012-09864, S2013/MIT-3007 and ESP2015-65597-C4-3-R for financial support., Peer reviewed