Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical single-molecule transistors with optimized gate coupling

  • Osorio, Henrry M.
  • Cea, Pilar
  • Hartl, František
  • Low, Paul J.
  • Martín, Santiago
  • Nichols, Richard J.
et al., Electrochemical gating at the single molecule level of viologen molecular bridges in ionic liquids is examined. Contrary to previous data recorded in aqueous electrolytes, a clear and sharp peak in the single molecule conductance versus electrochemical potential data is obtained in ionic liquids. These data are rationalized in terms of a two-step electrochemical model for charge transport across the redox bridge. In this model the gate coupling in the ionic liquid is found to be fully effective with a modeled gate coupling parameter, ξ, of unity. This compares to a much lower gate coupling parameter of 0.2 for the equivalent aqueous gating system. This study shows that ionic liquids are far more effective media for gating the conductance of single molecules than either solid-state three-terminal platforms created using nanolithography, or aqueous media., R.J.N. and S.J.H. thank EPSRC for funding (grant EP/H035184/1 and EP/K007785/1). S.M. and P.C. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain in the framework of projects CTQ2012-33198 and CTQ2013-50187-EXP and support from DGA and Fondos Feder for funding the Platon research group. P.J.L. thanks EPSRC for funding and also gratefully acknowledges support from the Australian Research Council (DP 140100855) and the award of a Future Fellowship (FT120100073). H.M.O. is grateful for financial assistance from Secretaria Nacional de Educación Superior, Ciencia, Tecnología e Innovación from Ministerio de Educación (Ecuador). F.H. thanks EPSRC for funding (EP/K00753X/1), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical characterization of single molecule and Langmuir-Blodgett monomolecular films of a pyridine-terminated oligo(phenylene-ethynylene) derivative

  • Osorio, Henrry M.
  • Martín, Santiago
  • López, M. Carmen
  • Marqués-González, Santiago
  • Higgins, Simon J.
  • Nichols, Richard J.
  • Low, Paul J.
  • Cea, Pilar
Monolayer Langmuir–Blodgett (LB) films of 1,4-bis(pyridin-4-ylethynyl)benzene (1) together with the “STM touch-to-contact” method have been used to study the nature of metal–monolayer–metal junctions in which the pyridyl group provides the contact at both molecule–surface interfaces. Surface pressure vs area per molecule isotherms and Brewster angle microscopy images indicate that 1 forms true monolayers at the air–water interface. LB films of 1 were fabricated by deposition of the Langmuir films onto solid supports resulting in monolayers with surface coverage of 0.98 × 10−9 mol·cm−2. The morphology of the LB films that incorporate compound 1 was studied using atomic force microscopy (AFM). AFM images indicate the formation of homogeneous, monomolecular films at a surface pressure of transference of 16 mN·m−1. The UV–vis spectra of the Langmuir and LB films reveal that 1 forms two dimensional J-aggregates. Scanning tunneling microscopy (STM), in particular the “STM touch-to-contact” method, was used to determine the electrical properties of LB films of 1. From these STM studies symmetrical I–V curves were obtained. A junction conductance of 5.17 × 10−5 G 0 results from the analysis of the pseudolinear (ohmic) region of the I–V curves. This value is higher than that of the conductance values of LB films of phenylene-ethynylene derivatives contacted by amines, thiols, carboxylate, trimethylsilylethynyl or acetylide groups. In addition, the single molecule I–V curve of 1 determined using the I(s) method is in good agreement with the I–V curve obtained for the LB film, and both curves fit well with the Simmons model. Together, these results not only indicate that the mechanism of transport through these metal–molecule–metal junctions is non-resonant tunneling, but that lateral interactions between molecules within the LB film do not strongly influence the molecule conductance. The results presented here complement earlier studies of single molecule conductance of 1 using STM-BJ methods, and support the growing evidence that the pyridyl group is an efficient and effective anchoring group in sandwiched metal–monolayer–metal junctions prepared under a number of different conditions., S. M., M. C. L, and P. C. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain in the framework of project CTQ2012-33198 and support from DGA and Fondos Feder for funding the Platon research group. S. M. also thanks his JIUZ-2013-CIE-05 grant. S. M and P. C. are grateful for the award of the CTQ2013-50187-EXP grant. P. J. L. thanks EPSRC for funding and also gratefully acknowledges support from the Australian Research Council (DP 140100855) and the award of the Future Fellowship (FT120100073). R. J. N. and S. J. H. thank EPSRC for funding (grant EP/H035184/1 and EP/K007785/1)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solvent dependence of the single molecule conductance of oligoyne-based molecular wires

  • Milan, David C.
  • Al-Owaedi, Oday A.
  • Oerthel, Marie-Christine
  • Marqués-González, Santiago
  • Brooke, Richard J.
  • Bryce, Martin R.
  • Cea, Pilar
  • Ferrer, Jaime
  • Higgins, Simon J.
  • Lambert, Colin J.
  • Low, Paul J.
  • Manrique, D. Zs.
  • Martín, Santiago
  • Nichols, Richard J.
  • Schwarzacher, Walther
  • García-Suárez, Víctor M.
The conductance and the decay of conductance as a function of molecular length within a homologous series of oligoynes, MeSi - (C≡C) - SiMe (n = 2, 3, 4, or 5), is shown to depend strongly on the solvent medium. Single molecule junction conductance measurements have been made with the I(s) method for each member of the series MeSi - (C≡C) - SiMe (n = 2, 3, 4, and 5) in mesitylene (MES), 1,2,4-trichlorobenzene (TCB), and propylene carbonate (PC). In mesitylene, a lower conductance is obtained across the whole series with a higher length decay (β ≈ 1 nm). In contrast, measurements in 1,2,4-trichlorobenzene and propylene carbonate give higher conductance values with lower length decay (β ≈ 0.1 and 0.5 nm respectively). This behavior is rationalized through theoretical and computational investigations, where β values are found to be higher when the contact Fermi energies are close to the middle of the HOMO-LUMO gap but decrease as the Fermi energies approach resonance with either the occupied or unoccupied frontier orbitals. The different conductance and β values between MES, PC, and TCB have been further explored using DFT-based models of the molecular junction, which include solvent molecules interacting with the oligoyne backbone. Good agreement between the experimental results and these >solvated> junction models is achieved, giving new insights into how solvent can influence charge transport in oligoyne-based single molecule junctions., D.C.M., S.J.H., R.J.N., P.J.L., and S.M-G. thank EPSRC for funding (EPSRC Grants EP/K007785/1, EP/H035184/1, and EP/K007548/1). P.J.L. holds an ARC Future Fellowship (FT120100073) and gratefully acknowledges funding for this work from the ARC (DP140100855). C.J.L. and O.A.A. acknowledge financial support from the Ministry of Higher Education and Scientific Research of Iraq. V.M.G.-S. thanks the Spanish Ministerio de Economıa y Competitividad for a Ramoń y Cajal fellowship (RYC-2010-06053). J.F. and V.M.G.-S. acknowledge financial support from the Spanish MICINN Grant FIS2012-34858 and the Marie Curie Network MOLESCO. They also acknowledge the supercomputing facility CESGA where part of the calculations was carried out. P.C. and S.M. are grateful for financial assistance from Ministerio de Economia y Competitividad from Spain in the framework of the project CTQ2012-33198 as well as the award of the CTQ2013-50187-EXP grant. P.C and S.M. thank the DGA and Fondos FEDER for funding for the Platon research group. S.M. thanks the Ministerio de Educacion of Spain for financial support in the framework of the Campus de Excelencia Internacional, CEI Iberus. M.R.B. and C.J.L. acknowledge funding from the EU through the FP7 ITN MOLESCO (Project Number 212942)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards a metallic top contact electrode in molecular electronic devices exhibiting a large surface coverage by photoreduction of silver cations

  • Martín, Santiago
  • Ballesteros, Luz M.
  • González-Orive, Alejandro
  • Oliva, Hugo
  • Marqués-González, Santiago
  • Lorenzoni, Matteo
  • Nichols, Richard J.
  • Perez Murano, Francesc X.
  • Low, Paul J.
  • Cea, Pilar
In this contribution the photoreduction of silver ions coordinated onto a Langmuir-Blodgett monolayer is presented as an effective method for the deposition of the top contact electrode in metal/monolayer/metal devices. Silver cations were incorporated from an aqueous AgNO sub-phase of Langmuir films of 4,4′-(1,4-phenylenebis(ethyne-2,1-diyl))dibenzoic acid upon the transference of these films onto a metallic substrate. Subsequent irradiation of the silver-ion functionalized Langmuir-Blodgett films with 254 nm light results in the photoreduction of silver cations to produce metallic silver nanoparticles, which are distributed over the organic monolayer and exhibit a surface coverage as large as 76% of the monolayer surface. Electrical properties of these metal/monolayer/metal devices were determined by recording I-V curves, which show a sigmoidal behaviour indicative of well-behaved junctions free of metallic filaments and short-circuits. The integrity of the organic monolayer upon the irradiation process and formation of the silver top-contact electrode has also been demonstrated through cyclic voltammetry experiments., S. M. F. P.-M and P. C. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain and fondos FEDER in the framework of projects CTQ2012-33198, CTQ2013-50187-EXP, CSIC10-4E-805, and CSD2010-00024. S. M. and P. C. also acknowledge DGA and fondos FEDER for funding the research group Platón (E-54). R. J. N., P. J. L. and S. M.-G. thank EPSRC for funding (EPSRC Grants EP/K007785/1, EP/H035184/1, and EP/K007548/1). P. J. L. holds an ARC Future Fellowship (FT120100073) and gratefully acknowledges funding for this work from the ARC (DP140100855)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanofabrication and electrochemical characterization of self-assembled monolayers sandwiched between metal nanoparticles and electrode surfaces

  • Cea, Pilar
  • Martín, Santiago
  • González-Orive, Alejandro
  • Osorio, Henrry M.
et al., Nanoscience and nanotechnology have reached the syllabi of many upper-division undergraduate and master-level courses all over the world. There is therefore a growing need for practical exercises that illustrate the fabrication, characterization, properties, and applications of nanomaterials. Here we describe an advanced-level laboratory experiment in which students had the opportunity to fabricate surfaces modified by ordered monolayers and nanostructured materials. The surface modification was quantified by means of a quartz crystal microbalance, while the electrochemical properties of the nanoarchitectures were assessed using cyclic voltammetry experiments. Electron transfer across self-assembled monolayers mediated by gold nanoparticles was presented as a topic for discussion, and consideration of potential practical applications of the observed phenomena (catalytic and electrocatalytic processes, as well as development of optical, (opto)electronic, and photovoltaic devices with enhanced properties) was proposed as a further reading exercise., Financial support from the Department of Physical Chemistry and DGA/Fondos Feder is acknowledge as well as CTQ2012-33198 and CTQ2013-50187-EXP grants., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low variability of single-molecule conductance assisted by bulky metal-molecule contacts

  • Ferradás, R.
  • Marqués-González, Santiago
  • Osorio, Henrry M.
  • Ferrer, Jaime
  • Cea, Pilar
  • Milan, David C.
  • Vezzoli, Andrea
  • Higgins, Simon J.
  • Nichols, Richard J.
  • Low, Paul J.
  • García-Suárez, Víctor M.
  • Martín, Santiago
A detailed study of the trimethylsilylethynyl moiety, –C[triple bond]CSiMe3 (TMSE) , as an anchoring group in metalmoleculemetal junctions, using a combination of experiment and density functional theory is presented. It is shown that the TMSE anchoring group provides improved control over the molecule-substrate arrangement within metalmoleculemetal junctions, with the steric bulk of the methyl groups limiting the number of highly transmissive binding sites at the electrode surface, resulting in a single sharp peak in the conductance histograms recorded by both the in situ break junction and I(s) STM techniques. As a consequence of the low accessibility of the TMSE group to surface binding configurations of measurable conductance, only about 10% of gold break junction formation cycles result in the clear formation of molecular junctions in the experimental histograms. The DFT-computed transmission characteristics of junctions formed from the TMSE-contacted oligo(phenylene)ethynylene (OPE)-based molecules described here are dominated by tunneling effects through the highest-occupied molecular orbitals (HOMOs). This gives rise to similar conductance characteristics in these TMSE-contacted systems as found in low conductance-type junctions based on comparably structured OPE-derivatives with amine-contacts that also conduct through HOMO-based channels., R. R. F. thanks the Consejería de Educación del Principado de Asturias for a Severo Ochoa grant (BP11-069). V. M. G.-S. thanks the Spanish Ministerio de Economía y Competitividad for a Ramón y Cajal fellowship (RYC-2010-06053). R. R. F., J. F. and V. M. G.-S. wish to acknowledge financial support from the Spanish grant FIS2012-34858 and the Marie Curie Network MOLESCO. P. C. and S. M. are grateful for financial assistance from the Ministerio de Economía y Competitividad of Spain in the framework of the project CTQ2012-33198 as well as the award of the CTQ2013-50187-EXP grant. H. M. O., P. C., and S. M. thank the support from DGA and Fondos FEDER for funding through the Platon research group. H. M. O. is also grateful for financial assistance from the Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovaciín from Ministerio de Educación (Ecuador). S. M. thanks the Ministerio de Educación from Spain for financial support through the framework of the Campus de Excelencia Internacional, CEI Iberus. S. J. H., R. J. N., P. J. L. and S. M.-G. thank the EPSRC for funding (EPSRC grants EP/K007785/1, EP/H035184/1, EP/K007548/1, EP/H005595/1). P. J. L. holds an Australian Research Council Future Fellowship (FT120100073) and gratefully acknowledges funding for this work from the ARC (DP140100855)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and synthesis of Aviram-Ratner-type dyads and rectification studies in Langmuir-Blodgett (LB) films

  • Martín, Santiago
  • González-Orive, Alejandro
  • Perez Murano, Francesc X.
  • Cea, Pilar
  • Diederich, François
The design and synthesis of Aviram–Ratner-type molecular rectifiers, featuring an anilino-substituted extended tetracyanoquinodimethane (exTCNQ) acceptor, covalently linked by the σ-spacer bicyclo[2.2.2]octane (BCO) to a tetrathiafulvalene (TTF) donor moiety, are described. The rigid BCO spacer keeps the TTF donor and exTCNQ acceptor moieties apart, as demonstrated by X-ray analysis. The photophysical properties of the TTF-BCO-exTCNQ dyads were investigated by UV/Vis and EPR spectroscopy, electrochemical studies, and theoretical calculations. Langmuir–Blodgett films were prepared and used in the fabrication and electrical studies of junction devices. One dyad showed the asymmetric current–voltage (I–V) curve characteristic for rectification, unlike control compounds containing the TTF unit but not the exTCNQ moiety or comprising the exTCNQ acceptor moiety but lacking the donor TTF part, which both gave symmetric I–V curves. The direction of the observed rectification indicated that the preferred electron current flows from the exTCNQ acceptor to the TTF donor., This work was supported by the ERC Advanced grant no.246637 (“OPTELOMAC”) and the Swiss National Science Foundation (SNF). A.D.F.acknowledges the NSF-IRFP (USA) for a postdoctoral fellowship. S.M. and P.C. are grateful for financial assistance from Ministerio de Ciencia e Innovación from Spainin the framework of grants CTQ2012-33198 and CTQ2013-50187-EXP., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

All-carbon electrode molecular electronic devices based on Langmuir–Blodgett monolayers

  • Sangiao, S.
  • Martín, Santiago
  • González-Orive, Alejandro
  • Magén, César
  • Low, Paul J.
  • Teresa, José María de
  • Cea, Pilar
Nascent molecular electronic devices, based on monolayer Langmuir–Blodgett films sandwiched between two carbonaceous electrodes, have been prepared. Tightly packed monolayers of 4-((4-((4-ethynylphenyl)ethynyl)phenyl)ethynyl)benzoic acid are deposited onto a highly oriented pyrolytic graphite electrode. An amorphous carbon top contact electrode is formed on top of the monolayer from a naphthalene precursor using the focused electron beam induced deposition technique. This allows the deposition of a carbon top-contact electrode with well-defined shape, thickness, and precise positioning on the film with nm resolution. These results represent a substantial step toward the realization of integrated molecular electronic devices based on monolayers and carbon electrodes., This work was supported by the Ministerio de Ciencia e Innovación from Spain in the framework of grants CTQ2013-50187-EXP, MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R, MAT2015-69725-REDT from MINECO (including FEDER funding) and CELINA COST Action CM1301. S.M and P.C. also acknowledge MINECO and FEDER funding for the MAT2016-78257-R grant. Financial support from DGA/Fondos Feder (Construyendo Europa desde Aragón) is also acknowledged by research group Platon (E-54) and Magna (E-26). P.J.L. holds an ARC Future Fellowship (Grant No. FT120100073) and gratefully acknowledges funding for this work from the ARC (Grant No. DP140100855)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-molecule conductance studies of organometallic complexes bearing 3-thienyl contacting groups

  • Bock, Sören
  • Al-Owaedi, Oday A.
  • Eaves, Samantha G.
  • Milan, David C.
  • Lemmer, Mario
  • Skelton, Brian W.
  • Osorio, Henrry M.
  • Nichols, Richard J.
  • Higgins, Simon J.
  • Cea, Pilar
  • Long, Nicholas J.
  • Albrecht, Tim
  • Martín, Santiago
  • Lambert, Colin J.
  • Low, Paul J.
The compounds and complexes 1,4-CH(C≡C-cyclo-3-CHS) (2), trans-[Pt(C≡C-cyclo-3-CHS)(PEt)] (3), trans-[Ru(C≡C-cyclo-3-CHS)(dppe)] (4; dppe=1,2-bis(diphenylphosphino)ethane) and trans-[Ru(C≡C-cyclo-3-CHS){P(OEt)}] (5) featuring the 3-thienyl moiety as a surface contacting group for gold electrodes have been prepared, crystallographically characterised in the case of 3–5 and studied in metal|molecule|metal junctions by using both scanning tunnelling microscope break-junction (STM-BJ) and STM-I(s) methods (measuring the tunnelling current (I) as a function of distance (s)). The compounds exhibit similar conductance profiles, with a low conductance feature being more readily identified by STM-I(s) methods, and a higher feature by the STM-BJ method. The lower conductance feature was further characterised by analysis using an unsupervised, automated multi-parameter vector classification (MPVC) of the conductance traces. The combination of similarly structured HOMOs and non-resonant tunnelling mechanism accounts for the remarkably similar conductance values across the chemically distinct members of the family 2–5., C.J.L. and O.A.A. acknowledge financial support from the Ministry of Higher Education and Scientific Research of Iraq. C.J.L. acknowledges funding from the EU through the FP7 ITN MOLESCO (project number 212942) and EPSRC (EP/N017188/1, EP/M014452/1 and EP/N03337X/1). P. J.L. holds an ARC Future Fellowship (FT120100073) and gratefully acknowledge sfunding for this work from the ARC (DP140100855,LE15100148). S.B.holds an International Postgraduate Research Scholarship and gratefully acknowledges support from the University of Western Australia. S.G.E. held a Durham Doctoral Scholarship, further supported by the University of Western Australia. T.A.(EP/N032977/1) and R.J.N. and S.J.H. (EP/H035184/1 and EP/K007785/1) thank the EPSRC for funding. M.L.,N.J.L. and T.A. acknowledge the Leverhulme Trust (RPG 2012-754and RPG2014-225) for funding. H.M.O. is grateful for financial assistance from the Secretaría Nacional de Educación Superior, Ciencia,Tecnología e Innovación from Ministerio de Educación (Ecuador). P. C. and S.M. are grateful for financial assistance from Ministerio de Economia y Competitividad from Spain and fondos FEDER in the framework of projects CTQ2012-33198 and CTQ2013-50187-EXP. S.M.and P. C. also acknowledge DGA and fondos FEDER for funding the research group Platón(E-54)., Peer Reviewed