Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

A C60-aryne building block: synthesis of a hybrid all-carbon nanostructure

  • García, D.
  • Rodríguez-Pérez, L.
  • Herranz, M.A.
  • Peña Gil, Diego
  • Guitián Rivera, Enrique
  • Bailey, S.
  • Al-Galiby, Q.
  • Noori, M.
  • Lambert, C. J.
  • Pérez Meirás, María Dolores
  • Martín, N.
The synthesis of a [60]fullerene-benzyne building block and its further chemical cycloaddition reaction with graphene has resulted in a new all-carbon hybrid material which has been characterized by TGA, FTIR and Raman spectroscopies, XPS as well as AFM and TEM. Based on computational studies, the formation of both [2+2] and [4+2] cycloadducts on the graphene surface is feasible
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Enhanced thermoelectricity in metal−[60]fullerene−graphene molecular junctions

  • Simon A., Svatek
  • Valentina, Sacchetti
  • Laura, Rodríguez-Pérez
  • Beatriz M., Illescas
  • Laura, Rincón-García
  • Gabino, Rubio-Bollinger
  • M. Teresa, González
  • Steven, Bailey
  • Colin J., Lambert
  • Nazario, Martín
  • Agrait de la Puente, Mario Nicolás
The thermoelectric properties of molecular junctions consisting of a metal Pt electrode contacting [60]fullerene derivatives covalently bound to a graphene electrode have been studied by using a conducting-probe atomic force microscope (c-AFM). The [60]fullerene derivatives are covalently linked to the graphene via two meta-connected phenyl rings, two para-connected phenyl rings, or a single phenyl ring. We find that the magnitude of the Seebeck coefficient is up to nine times larger than that of Au-C60-Pt molecular junctions. Moreover, the sign of the thermopower can be either positive or negative depending on the details of the binding geometry and on the local value of the Fermi energy. Our results demonstrate the potential of using graphene electrodes for controlling and enhancing the thermoelectric properties of molecular junctions and confirm the outstanding performance of [60]fullerene derivatives, This work has been supported by the European Commission through FP7 ITN MOLESCO (Project Number 606728), the (MAD2D-CM)-UCM1-MRR project and through the EC H2020 FET Open Project Grant Agreement Number 767187 “QuIET”. The authors acknowledge support from the Spanish Ministry of Science and Innovation MCIN (Projects PID2020-114653RB-I00, PID2020-115120GB-I00, Centro de Excelencia Severo Ochoa SEV-2016-0686). L.R.-G. acknowledges support from Spanish MECD (Grant No. FPU14/03368) and, with N.A., funding from the Education and Research Council of the Comunidad de Madrid and the European Social Fund (ref. PEJD-2019-POST/IND-16353)
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Single-molecule conductance of a chemically modified, π-extended tetrathiafulvalene and its charge-transfer complex with F4TCNQ

  • García, R.
  • Herranz, M.Á.
  • Leary, Edmund
  • González, M.T.
  • Bollinger, G.R.
  • Bürkle, M.
  • Zotti, Linda Ángela
  • Asai, Y.
  • Pauly, F.
  • Cuevas Rodríguez, Juan Carlos
  • Agrait de la Puente, Mario Nicolás
  • Martín, N.
We describe the synthesis and single-molecule electrical transport properties of a molecular wire containing a π-extended tetrathiafulvalene (exTTF) group and its charge-transfer complex with F4TCNQ. We form single-molecule junctions using the in situ break junction technique using a homebuilt scanning tunneling microscope with a range of conductance between 10 G0 down to 10-7 G0. Within this range we do not observe a clear conductance signature of the neutral parent molecule, suggesting either that its conductance is too low or that it does not form a stable junction. Conversely, we do find a clear conductance signature in the experiments carried out on the charge-transfer complex. Due to the fact we expected this species to have a higher conductance than the neutral molecule, we believe this supports the idea that the conductance of the neutral molecule is very low, below our measurement sensitivity. This idea is further supported by theoretical calculations. To the best of our knowledge, these are the first reported single-molecule conductance measurements on a molecular charge-transfer species, Financial support by the European Commission (EC) FP7 ITN “MOLESCO” Project No. 606728, the European Research Council (ERC-436 2012 ADG_20120216-Chirallcarbon), the CAM (PHOTOCARBON project S2013/MIT-2841, NANOFRONTMAG-CM project S2013/MIT-2850 and MAD2D project S2013/MIT-3007), FP7- ENERGY-2012-1-2STAGE-number 309223 (PHOCS) and the Spanish MICINN/MINECO through the programs MAT2011- 25046, MAT2014-57915-R and PRI-PIBUS-2011-1067 is acknowledged. MB was partly supported by a FY2012 (P12501) Postdoctoral Fellowship for Foreign Researchers from the Japan Society for Promotion of Science (JSPS) and by a JSPS KAKENHI, “Grant-in-Aid for JSPS Fellows”, grant no. 24·02501. YA is also thankful to another KAKENHI, “Grantin-Aid for Scientific Research on Innovation Areas, Molecular Architectonics: Orchestration of Single Molecules for Novel Functions” (#25110009). LAZ was supported by the Spanish MICINN under Grant MAT2011-23627. FP acknowledges support by the Carl-Zeiss foundation and the Collaborative Research Center 767 “Controlled Nanosystems: Interaction and Interfacing to the Macroscale”
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

GOLLUM: a next-generation simulation tool for electron, thermal and spin transport

  • Ferrer, Jaime
  • Lambert, Colin J.
  • García-Suárez, Víctor M.
  • Manrique, D. Zs.
  • Ferradás, R.
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence.-- et al., We have developed an efficient simulation tool 'GOLLUM' for the computation of electrical, spin and thermal transport characteristics of complex nanostructures. The new multi-scale, multi-terminal tool addresses a number of new challenges and functionalities that have emerged in nanoscale-scale transport over the past few years. To illustrate the flexibility and functionality of GOLLUM, we present a range of demonstrator calculations encompassing charge, spin and thermal transport, corrections to density functional theory such as local density approximation +U (LDA+U) and spectral adjustments, transport in the presence of non-collinear magnetism, the quantum Hall effect, Kondo and Coulomb blockade effects, finite-voltage transport, multi-terminal transport, quantum pumps, superconducting nanostructures, environmental effects, and pulling curves and conductance histograms for mechanically-controlled break-junction experiments., The research presented here was funded by the Spanish Ministerio de Economía y Competitividad through the grant FIS2012–34858, by UK EPSRC grants EP/K001507/1, EP/J014753/1, EP/H035818/1, and by the European Union Marie-Curie Network ‘MOLESCO’. VMGS thanks the Spanish Ministerio de Economía y Competitividad for a Ramón y Cajal fellowship (RYC-2010–06053). LO has been supported by the Hungarian Scientic Research Fund No. K108676., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene sculpturene nanopores for DNA nucleobase sensing

  • Manrique, D. Zs.
  • Ferrer, Jaime
  • García-Suárez, Víctor M.
  • Lambert, Colin J.
et al., To demonstrate the potential of nanopores in bilayer graphene for DNA sequencing, we computed the current-voltage characteristics of a bilayer graphene junction containing a nanopore and found that they change significantly when nucleobases are transported through the pore. To demonstrate the sensitivity and selectivity of example devices, we computed the probability distribution PX(ß) of the quantity ß representing the change in the logarithmic current through the pore due to the presence of a nucleobase X (X = adenine, thymine, guanine, or cytosine). We quantified the selectivity of the bilayer-graphene nanopores by showing that P X(ß) exhibits distinct peaks for each base X. To demonstrate that such discriminating sensing is a general feature of bilayer nanopores, the well-separated positions of these peaks were shown to be present for different pores, with alternative examples of electrical contacts. © 2014 American Chemical Society., This work was supported by the European Union Marie-Curie Network MOLESCO. Funding was also provided by the UK EPSRC and the Spanish MINECO through Grant FIS2012-34858. V.G.-S. thanks the Spanish Ministerio de Economiá y Competitividad for a Ramón y Cajal fellowship (RYC-2010-06053)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Systematic pseudopotentials from reference eigenvalue sets for DFT calculations

  • Rivero, Pablo
  • García-Suárez, Víctor M.
  • Park, Kyungwha
  • Ferrer, Jaime
  • Barraza-López, Salvador
Under a Creative Commons license.-- et al., Pseudopotential-based Density-Functional Theory (DFT) permits the calculation of material properties with a modest computational effort, besides an acknowledged tradeoff of generating and testing pseudopotentials that reproduce established benchmark structural and electronic properties. To facilitate the needed benchmarking process, here we present a pragmatic method to optimize pseudopotentials for arbitrary materials directly from eigenvalue sets consistent with all-electron results. This method thus represents a much needed pragmatic route for the creation and assessment of sensitive pseudopotentials for DFT calculations that has been exemplified within the context of the SIESTA code. Comprehensive optimized pseudopotentials, basis sets, and lattice parameters are provided for twenty chemical elements in the bulk, and for both LDA and GGA exchange–correlation potentials. This method helps addressing the following issues: (i) the electronic dispersion and structural properties for Ge, Pd, Pt, Au, Ag, and Ta better agree with respect to all-electron results now, (ii) we provide the expected metallic behavior of Sn in the bulk – which comes out semiconducting when using available pseudopotentials, (iii) we create a validated pseudopotential for LDA-tungsten, and (iv) we create the first Bi pseudopotential for SIESTA that reproduces well-known electron and hole pockets at the L and T points. We investigated the transferability of these pseudopotentials and basis sets, and predict a new phase for two-dimensional tin as well., P.R. and S.B.L. acknowledge partial support from the Arkansas Biosciences Institute. V.M.G.S. and J.F. acknowledge funding from the Spanish MICINN, Grant FIS2012-34858, and European Commission FP7 ITN “MOLESCO” (Grant No. 606728). V.M.G.S. thanks the Spanish Ministerio de Economía y Competitividad for a Ramón y Cajal fellowship (RYC-2010-06053), Y.Y. and L.B. thank ONR (Grants N00014-11-1-0384 and N00014-12-1-1034), and K.P. acknowledges funding from the National Science Foundation (DMR-1206354)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Hubbard dimer: a density functional case study of a many-body problem

  • Carrascal, Diego
  • Ferrer, Jaime
  • Smith, Justin
  • Burke, Kieron
arXiv:1502.02194v1, This review explains the relationship between density functional theory and strongly correlated models using the simplest possible example, the two-site Hubbard model. The relationship to traditional quantum chemistry is included. Even in this elementary example, where the exact ground-state energy and site occupations can be found analytically, there is much to be explained in terms of the underlying logic and aims of density functional theory. Although the usual solution is analytic, the density functional is given only implicitly. We overcome this difficulty using the Levy-Lieb construction to create a parametrization of the exact function with negligible errors. The symmetric case is most commonly studied, but we find a rich variation in behavior by including asymmetry, as strong correlation physics vies with charge-transfer effects. We explore the behavior of the gap and the many-body Green's function, demonstrating the 'failure' of the Kohn-Sham (KS) method to reproduce the fundamental gap. We perform benchmark calculations of the occupation and components of the KS potentials, the correlation kinetic energies, and the adiabatic connection. We test several approximate functionals (restricted and unrestricted Hartree-Fock and Bethe ansatz local density approximation) to show their successes and limitations. We also discuss and illustrate the concept of the derivative discontinuity. Useful appendices include analytic expressions for density functional energy components, several limits of the exact functional (weak- and strong-coupling, symmetric and asymmetric), various adiabatic connection results, proofs of exact conditions for this model, and the origin of the Hubbard model from a minimal basis model for stretched H2., Work at Universidad de Oviedo was supported by the Spanish MINECO project FIS2012-34858, and the EU ITN network MOLESCO. Work at UC Irvine was supported by the US Department of Energy (DOE), Office of Science, Basic Energy Sciences (BES) under award # DE-FG02-08ER46496. JCS acknowledges support through the NSF Graduate Research fellowship program under award # DGE-1321846., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Simulation of molecular junctions with bulky metal-molecule contacts

  • Ferradás, R.
  • Ferrer, Jaime
  • García-Suárez, Víctor M.
Resumen del póster presentado a la XXXV Reunión Bienal de la Real Sociedad Española de Física y al 25º Encuentro Ibérico de Enseñanza de la Física, celebrados en Gijón (España) del 13 al 17 de julio de 2015., [Introducción]: The transport properties of molecular junctions and nanoscale devices in general can be simulated with a relatively high accuracy by using a combination of density functional theory (DFT), the Landauer formalism and corrections to the HOMO-LUMO gap. Even though in many cases the results do not agree quantitatively with experiments, the qualitative trends are correctly predicted. Theoretical simulations can be therefore regarded as a powerful tool to understand the transport mechanisms in molecular electronics and nanoscale systems. [Main text]: A detailed study of the trimethylsilylethynyl moiety, -CCSiMe3 (TMSE), as an anchoring group in met-al|molecule|metal junctions using density functional theory is presented. It is shown that the TMSE anchoring group provides improved control over the molecule-substrate arrangement within metal|molecule|metal junctions, with the steric bulk of the methyl groups limiting the number of highly transmissive binding sites at the electrode surface. The DFT-computed transmission characteristics of these junctions based on the TMSE-contacts are dominated by tunneling effects through the HOMOs of the oligo(phenylene)ethynylene (OPE)-based molecules described here, giving rise to similar conductance characteristics as those found in low conductance-type junctions based on similarly structured OPE-derivatives with amine-contacts that also conduct through HOMO-based channels., R.R.F. thanks Consejería de Educación del Principado de Asturias for a Severo Ochoa grant (BP11-069). V.M.G.-S. thanks the Spanish Ministerio de Economía y Competitividad for a Ramón y Cajal fellowship (RYC-2010-06053). R.R.F., J.F. and V.M.G.-S wish to acknowledge financial support from the Spanish grant FIS2012-34858 and the Marie Curie Network MOLESCO., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solvent dependence of the single molecule conductance of oligoyne-based molecular wires

  • Milan, David C.
  • Al-Owaedi, Oday A.
  • Oerthel, Marie-Christine
  • Marqués-González, Santiago
  • Brooke, Richard J.
  • Bryce, Martin R.
  • Cea, Pilar
  • Ferrer, Jaime
  • Higgins, Simon J.
  • Lambert, Colin J.
  • Low, Paul J.
  • Manrique, D. Zs.
  • Martín, Santiago
  • Nichols, Richard J.
  • Schwarzacher, Walther
  • García-Suárez, Víctor M.
The conductance and the decay of conductance as a function of molecular length within a homologous series of oligoynes, MeSi - (C≡C) - SiMe (n = 2, 3, 4, or 5), is shown to depend strongly on the solvent medium. Single molecule junction conductance measurements have been made with the I(s) method for each member of the series MeSi - (C≡C) - SiMe (n = 2, 3, 4, and 5) in mesitylene (MES), 1,2,4-trichlorobenzene (TCB), and propylene carbonate (PC). In mesitylene, a lower conductance is obtained across the whole series with a higher length decay (β ≈ 1 nm). In contrast, measurements in 1,2,4-trichlorobenzene and propylene carbonate give higher conductance values with lower length decay (β ≈ 0.1 and 0.5 nm respectively). This behavior is rationalized through theoretical and computational investigations, where β values are found to be higher when the contact Fermi energies are close to the middle of the HOMO-LUMO gap but decrease as the Fermi energies approach resonance with either the occupied or unoccupied frontier orbitals. The different conductance and β values between MES, PC, and TCB have been further explored using DFT-based models of the molecular junction, which include solvent molecules interacting with the oligoyne backbone. Good agreement between the experimental results and these >solvated> junction models is achieved, giving new insights into how solvent can influence charge transport in oligoyne-based single molecule junctions., D.C.M., S.J.H., R.J.N., P.J.L., and S.M-G. thank EPSRC for funding (EPSRC Grants EP/K007785/1, EP/H035184/1, and EP/K007548/1). P.J.L. holds an ARC Future Fellowship (FT120100073) and gratefully acknowledges funding for this work from the ARC (DP140100855). C.J.L. and O.A.A. acknowledge financial support from the Ministry of Higher Education and Scientific Research of Iraq. V.M.G.-S. thanks the Spanish Ministerio de Economıa y Competitividad for a Ramoń y Cajal fellowship (RYC-2010-06053). J.F. and V.M.G.-S. acknowledge financial support from the Spanish MICINN Grant FIS2012-34858 and the Marie Curie Network MOLESCO. They also acknowledge the supercomputing facility CESGA where part of the calculations was carried out. P.C. and S.M. are grateful for financial assistance from Ministerio de Economia y Competitividad from Spain in the framework of the project CTQ2012-33198 as well as the award of the CTQ2013-50187-EXP grant. P.C and S.M. thank the DGA and Fondos FEDER for funding for the Platon research group. S.M. thanks the Ministerio de Educacion of Spain for financial support in the framework of the Campus de Excelencia Internacional, CEI Iberus. M.R.B. and C.J.L. acknowledge funding from the EU through the FP7 ITN MOLESCO (Project Number 212942)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low variability of single-molecule conductance assisted by bulky metal-molecule contacts

  • Ferradás, R.
  • Marqués-González, Santiago
  • Osorio, Henrry M.
  • Ferrer, Jaime
  • Cea, Pilar
  • Milan, David C.
  • Vezzoli, Andrea
  • Higgins, Simon J.
  • Nichols, Richard J.
  • Low, Paul J.
  • García-Suárez, Víctor M.
  • Martín, Santiago
A detailed study of the trimethylsilylethynyl moiety, –C[triple bond]CSiMe3 (TMSE) , as an anchoring group in metalmoleculemetal junctions, using a combination of experiment and density functional theory is presented. It is shown that the TMSE anchoring group provides improved control over the molecule-substrate arrangement within metalmoleculemetal junctions, with the steric bulk of the methyl groups limiting the number of highly transmissive binding sites at the electrode surface, resulting in a single sharp peak in the conductance histograms recorded by both the in situ break junction and I(s) STM techniques. As a consequence of the low accessibility of the TMSE group to surface binding configurations of measurable conductance, only about 10% of gold break junction formation cycles result in the clear formation of molecular junctions in the experimental histograms. The DFT-computed transmission characteristics of junctions formed from the TMSE-contacted oligo(phenylene)ethynylene (OPE)-based molecules described here are dominated by tunneling effects through the highest-occupied molecular orbitals (HOMOs). This gives rise to similar conductance characteristics in these TMSE-contacted systems as found in low conductance-type junctions based on comparably structured OPE-derivatives with amine-contacts that also conduct through HOMO-based channels., R. R. F. thanks the Consejería de Educación del Principado de Asturias for a Severo Ochoa grant (BP11-069). V. M. G.-S. thanks the Spanish Ministerio de Economía y Competitividad for a Ramón y Cajal fellowship (RYC-2010-06053). R. R. F., J. F. and V. M. G.-S. wish to acknowledge financial support from the Spanish grant FIS2012-34858 and the Marie Curie Network MOLESCO. P. C. and S. M. are grateful for financial assistance from the Ministerio de Economía y Competitividad of Spain in the framework of the project CTQ2012-33198 as well as the award of the CTQ2013-50187-EXP grant. H. M. O., P. C., and S. M. thank the support from DGA and Fondos FEDER for funding through the Platon research group. H. M. O. is also grateful for financial assistance from the Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovaciín from Ministerio de Educación (Ecuador). S. M. thanks the Ministerio de Educación from Spain for financial support through the framework of the Campus de Excelencia Internacional, CEI Iberus. S. J. H., R. J. N., P. J. L. and S. M.-G. thank the EPSRC for funding (EPSRC grants EP/K007785/1, EP/H035184/1, EP/K007548/1, EP/H005595/1). P. J. L. holds an Australian Research Council Future Fellowship (FT120100073) and gratefully acknowledges funding for this work from the ARC (DP140100855)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-molecule conductance studies of organometallic complexes bearing 3-thienyl contacting groups

  • Bock, Sören
  • Al-Owaedi, Oday A.
  • Eaves, Samantha G.
  • Milan, David C.
  • Lemmer, Mario
  • Skelton, Brian W.
  • Osorio, Henrry M.
  • Nichols, Richard J.
  • Higgins, Simon J.
  • Cea, Pilar
  • Long, Nicholas J.
  • Albrecht, Tim
  • Martín, Santiago
  • Lambert, Colin J.
  • Low, Paul J.
The compounds and complexes 1,4-CH(C≡C-cyclo-3-CHS) (2), trans-[Pt(C≡C-cyclo-3-CHS)(PEt)] (3), trans-[Ru(C≡C-cyclo-3-CHS)(dppe)] (4; dppe=1,2-bis(diphenylphosphino)ethane) and trans-[Ru(C≡C-cyclo-3-CHS){P(OEt)}] (5) featuring the 3-thienyl moiety as a surface contacting group for gold electrodes have been prepared, crystallographically characterised in the case of 3–5 and studied in metal|molecule|metal junctions by using both scanning tunnelling microscope break-junction (STM-BJ) and STM-I(s) methods (measuring the tunnelling current (I) as a function of distance (s)). The compounds exhibit similar conductance profiles, with a low conductance feature being more readily identified by STM-I(s) methods, and a higher feature by the STM-BJ method. The lower conductance feature was further characterised by analysis using an unsupervised, automated multi-parameter vector classification (MPVC) of the conductance traces. The combination of similarly structured HOMOs and non-resonant tunnelling mechanism accounts for the remarkably similar conductance values across the chemically distinct members of the family 2–5., C.J.L. and O.A.A. acknowledge financial support from the Ministry of Higher Education and Scientific Research of Iraq. C.J.L. acknowledges funding from the EU through the FP7 ITN MOLESCO (project number 212942) and EPSRC (EP/N017188/1, EP/M014452/1 and EP/N03337X/1). P. J.L. holds an ARC Future Fellowship (FT120100073) and gratefully acknowledge sfunding for this work from the ARC (DP140100855,LE15100148). S.B.holds an International Postgraduate Research Scholarship and gratefully acknowledges support from the University of Western Australia. S.G.E. held a Durham Doctoral Scholarship, further supported by the University of Western Australia. T.A.(EP/N032977/1) and R.J.N. and S.J.H. (EP/H035184/1 and EP/K007785/1) thank the EPSRC for funding. M.L.,N.J.L. and T.A. acknowledge the Leverhulme Trust (RPG 2012-754and RPG2014-225) for funding. H.M.O. is grateful for financial assistance from the Secretaría Nacional de Educación Superior, Ciencia,Tecnología e Innovación from Ministerio de Educación (Ecuador). P. C. and S.M. are grateful for financial assistance from Ministerio de Economia y Competitividad from Spain and fondos FEDER in the framework of projects CTQ2012-33198 and CTQ2013-50187-EXP. S.M.and P. C. also acknowledge DGA and fondos FEDER for funding the research group Platón(E-54)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural phase transition and material properties of few-layer monochalcogenides

  • Mehboudi, Mehrshad
  • Fregoso, Benjamin M.
  • Yang, Yurong
  • Zhu, Wenjuan
  • Zande, Arend van der
  • Ferrer, Jaime
  • Bellaiche, L.
  • Kumar, Pradeep
  • Barraza-López, Salvador
GeSe and SnSe monochalcogenide monolayers and bilayers undergo a two-dimensional phase transition from a rectangular unit cell to a square unit cell at a critical temperature Tc well below the melting point. Its consequences on material properties are studied within the framework of Car-Parrinello molecular dynamics and density-functional theory. No in-gap states develop as the structural transition takes place, so that these phase-change materials remain semiconducting below and above Tc. As the in-plane lattice transforms from a rectangle into a square at Tc, the electronic, spin, optical, and piezoelectric properties dramatically depart from earlier predictions. Indeed, the Y and X points in the Brillouin zone become effectively equivalent at Tc, leading to a symmetric electronic structure. The spin polarization at the conduction valley edge vanishes, and the hole conductivity must display an anomalous thermal increase at Tc. The linear optical absorption band edge must change its polarization as well, making this structural and electronic evolution verifiable by optical means. Much excitement is drawn by theoretical predictions of giant piezoelectricity and ferroelectricity in these materials, and we estimate a pyroelectric response of about 3×10−12 C/Km here. These results uncover the fundamental role of temperature as a control knob for the physical properties of few-layer group-IV monochalcogenides., M. M. and S. B.-L. are funded by an Early Career Grant from the U.S. DOE (Grant No. SC0016139). Y. Y. and L. B. were funded by ONR Grant No. N00014-12-1-1034, and B. M. F. by NSF Grant No. DMR-1206515 and CONACyT (Mexico). J. F. acknowledges funding from the Spanish MICINN, Grant No. FIS2012-34858, and European Commission FP7 ITN MOLESCO (Grant No. 606728). Calculations were performed on Trestles at the Arkansas High Performance Computing Center, which is funded through multiple National Science Foundation grants and the Arkansas Economic Development Commission., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and single-molecule conductance study of redox-active ruthenium complexes with pyridyl and dihydrobenzo [b] thiophene anchoring groups

  • Ozawa, Hiroaki
  • Baghernejad, Masoud
  • Al-Owaedi, Oday A.
  • Kaliginedi, Veerabhadrarao
  • Nagashima, Takumi
  • Ferrer, Jaime
  • Wandlowski, Thomas
  • García-Suárez, Víctor M.
  • Broekmann, Peter
  • Lambert, Colin J.
  • Haga, Masa-aki
The ancillary ligands 4′‐(4‐pyridyl)‐2,2′:6′,2′′‐terpyridine and 4′‐(2,3‐dihydrobenzo[b]thiophene)‐2,2′‐6′,2“‐terpyridine were used to synthesize two series of mono‐ and dinuclear ruthenium complexes differing in their lengths and anchoring groups. The electrochemical and single‐molecular conductance properties of these two series of ruthenium complexes were studied experimentally by means of cyclic voltammetry and the scanning tunneling microscopy‐break junction technique (STM‐BJ) and theoretically by means of density functional theory (DFT). Cyclic voltammetry data showed clear redox peaks corresponding to both the metal‐ and ligand‐related redox reactions. Single‐molecular conductance demonstrated an exponential decay of the molecular conductance with the increase in molecular length for both the series of ruthenium complexes, with decay constants of βPY=2.07±0.1 nm−1 and βBT=2.16±0.1 nm−1, respectively. The contact resistance of complexes with 2,3‐dihydrobenzo[b]thiophene (BT) anchoring groups is found to be smaller than the contact resistance of ruthenium complexes with pyridine (PY) anchors. DFT calculations support the experimental results and provided additional information on the electronic structure and charge transport properties in those metal|ruthenium complex|metal junctions., We acknowledge the financial support from the Swiss National Science Foundation (Grant No. 200020‐144471); SCCER Heat and Electricity storage; M.H. acknowledges the financial support from the Institute of Science and Engineering at Chuo University. H.O. is grateful to Tokuyama Science Foundation. C.J.L. and O.A.A. acknowledge financial support from the UK EPSRC (grant no. EP/M014452/1 and EP/N017188/1), the European Commission (EC) FP7 ITN “MOLESCO” (project no. 606728), and the Ministry of Higher Education and Scientific Research of Iraq. V.M.G.‐S. and J.F. thank the Spanish MICINN for funding (Grant No. FIS2012‐34858). V.M.G.‐S. also thanks the Spanish MICINN for a Ramón y Cajal Fellowship (RYC‐2010‐06053)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectricity in vertical graphene-C60-graphene architectures

  • Wu, Qingqing
  • Sadeghi, Hatef
  • García-Suárez, Víctor M.
  • Ferrer, Jaime
  • Lambert, Colin J.
Recent studies of single-molecule thermoelectricity have identified families of high-performance molecules. However, in order to translate this discovery into practical thin-film energy-harvesting devices, there is a need for an understanding of the fundamental issues arising when such junctions are placed in parallel. This is relevant because controlled scalability might be used to boost electrical and thermoelectric performance over the current single-junction paradigm. As a first step in this direction, we investigate here the properties of two C molecules placed in parallel and sandwiched between top and bottom graphene electrodes. In contrast with classical conductors, we find that increasing the number of parallel junctions from one to two can cause the electrical conductance to increase by more than a factor of 2. Furthermore, we show that the Seebeck coefficient is sensitive to the number of parallel molecules sandwiched between the electrodes, whereas classically it should be unchanged. This non-classical behaviour of the electrical conductance and Seebeck coefficient are due to inter-junction quantum interference, mediated by the electrodes, which leads to an enhanced response in these vertical molecular devices., H.S. thanks UK EPSRC for a post doctorate position funded by Quantum Effects in Electronic Nanodevices (QuEEN) Program grant. This work was also supported by UK EPSRC (grant nos. EP/M014452/1 and EP/N017188/1), the Spanish Ministerio de Economía y Competitividad (grants FIS2012-34858 and FIS2015-63918-R) and the European Commission FP7 ITN “MOLESCO” (project no. 606728)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gate tunable photovoltaic effect in MoS2 vertical p–n homostructures

  • Svatek, Simon A.
  • Antolín, Elisa
  • Lin, Der-Yuh
  • Frisenda, Riccardo
  • Reuter, Christoph
  • Molina-Mendoza, Aday J.
  • Muñoz Sánchez, Manuel
  • Ko, Tsung-Shine
  • Pérez de Lara, David
  • Castellanos-Gómez, Andrés
p–n junctions based on vertically stacked single or few-layer transition metal dichalcogenides (TMDCs) have attracted substantial scientific interest. Due to the propensity of TMDCs to show exclusively one type of conductivity, n- or p-type, heterojunctions of different materials are typically fabricated to produce diode-like current rectification and photovoltaic response. Recently, artificial, stable and substitutional doping of MoS2 into n- and p-type materials has been demonstrated. MoS2 is an interesting material for use in optoelectronic applications due to its potential of low-cost production in large quantities, strong light–matter interactions and chemical stability. Here we report the characterization of the optoelectronic properties of vertical homojunctions made by stacking few-layer flakes of MoS2:Fe (n-type) and MoS2:Nb (p-type). The junctions exhibit a peak external quantum efficiency of 4.7% and a maximum open circuit voltage of 0.51 V; they are stable in air; and their rectification characteristics and photovoltaic response are in excellent agreement with the Shockley diode model. The gate-tunability of the maximum output power, the ideality factor and the shunt resistance indicate that the dark current is dominated by trap-assisted recombination and that the photocurrent collection depends strongly on the spatial extent of the space charge region. We demonstrate a response time faster than 80 ms and highlight the potential to integrate such devices into quasi-transparent and flexible optoelectronics., S. A. S. and N. A. acknowledge funding from the European Commission through the FP7 ITN MOLESCO (Project Number 606728). E. A. gratefully acknowledges financial support from L’Oréal-UNESCO through the Women in Science program. A. J. M.-M. acknowledges the financial support from MICINN (Spain) through the scholarship BES-2012-057346. D. Y. and T. S. acknowledge the support from the Ministry of Science and Technology of the Republic of China under the MOST 104-2112-M-018-004 and 104-2221-E-018-017. D. P. is thankful for funding from the Spanish Ministry of Economy and Competitiveness through FIS2015-67367-C2-1-P. R. F. thanks the Netherlands Organisation for Scientific Research (NWO) for the financial support through the research programme Rubicon with the project number 680-50-1515. AC-G. acknowledges the support from the BBVA Foundation through the fellowship “I Convocatoria de Ayudas Fundacion BBVA a Investigadores, Innovadores y Creadores Culturales” (“Semiconductores ultradelgados: hacia la optoelectronica flexible”), from the MINECO (Ramón y Cajal 2014 program, RYC-2014-01406), from the MICINN (MAT2014-58399-JIN) and from the Comunidad de Madrid (MAD2D-CM Program (S2013/MIT-3007)), and the European Commission under the Graphene Flagship, contract CNECTICT-604391., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photodiodes based in La0.7Sr0.3MnO3/single layer MoS2 hybrid vertical heterostructures

  • Niu, Yue
  • Frisenda, Riccardo
  • Svatek, Simon A.
  • Orfila, Gloria
  • Gallego-Marcos, Fernando
  • Gant, Patricia
  • Agra, Nicolás
  • León, Carlos
  • Rivera-Calzada, Alberto
  • Pérez de Lara, David
  • Santamaría, Jacobo
  • Castellanos-Gómez, Andrés
The fabrication of artificial materials by stacking of individual two-dimensional (2D) materials is amongst one of the most promising research avenues in the field of 2D materials. Moreover, this strategy to fabricate new man-made materials can be further extended by fabricating hybrid stacks between 2D materials and other functional materials with different dimensionality making the potential number of combinations almost infinite. Among all these possible combinations, mixing 2D materials with transition metal oxides can result especially useful because of the large amount of interesting physical phenomena displayed separately by these two material families. We present a hybrid device based on the stacking of a single layer MoS onto a lanthanum strontium manganite (LaSrMnO) thin film, creating an atomically thin device. It shows a rectifying electrical transport with a ratio of 10, and a photovoltaic effect with V up to 0.4 V. The photodiode behaviour arises as a consequence of the different doping character of these two materials. This result paves the way towards combining the efforts of these two large materials science communities., Work at IMDEA was supported by MINECO (Ramón y Cajal 2014 program RYC-2014-01406, MAT2014-58399-JIN, FIS2015-67367-C2-1-P), the Comunidad de Madrid (MAD2D-CM Program (S2013/MIT-3007)) and NANOFRONTMAG-CM program (S2013/MIT-2850) and the European Commission under the Graphene Flagship (contract CNECTICT-604391) and FP7 ITN MOLESCO (project no. 606728). RF acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515. YN acknowledges the grant from the China Scholarship Council (File NO. 201506120102). Work at UCM supported by Spanish MINECO through grants MAT2014-52405-C02-01 and by CAM through grant CAM S2013/MIT-2740. Work at ICMM is supported by Spanish MINECO through grant MAT2014-52405-C02-02.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical contrast and refractive index of natural van der Waals heterostructure nanosheets of franckeite

  • Gant, Patricia
  • Ghasemi, Foad
  • Maeso, David
  • Munuera, C.
  • López-Elvira, Elena
  • Frisenda, Riccardo
  • Pérez de Lara, David
  • Rubio-Bollinger, Gabino
  • García-Hernández, Mar
  • Castellanos-Gómez, Andrés
We study mechanically exfoliated nanosheets of franckeite by quantitative optical microscopy. The analysis of transmission-mode and epi-illumination-mode optical microscopy images provides a rapid method to estimate the thickness of the exfoliated flakes at first glance. A quantitative analysis of the optical contrast spectra by means of micro-reflectance allows one to determine the refractive index of franckeite over a broad range of the visible spectrum through a fit of the acquired spectra to a model based on the Fresnel law., We acknowledge funding from the European Commission under the Graphene Flagship, contract CNECTICT-604391, from EU Horizon 2020 research and innovation program under grant agreement No. 696656 (GrapheneCore1 – Graphene-based disruptive technologies), from the FP7 ITN MOLESCO (project no. 606728), from the MINECO (FIS2015-67367-C2-1-P, MAT2014-57915-R, MDM-2014-0377 and Ramón y Cajal 2014 program RYC-2014-16626), from the Comunidad de Madrid (MAD2D-CM Program (S2013/MIT-3007)) and NANOFRONTMAG-CM program (S2013/MIT-2850). RF acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lithography-free electrical transport measurements on 2D materials by direct microprobing

  • Gant, Patricia
  • Niu, Yue
  • Svatek, Simon A.
  • Agraït, Nicolás
  • Munuera, C.
  • García-Hernández, Mar
  • Frisenda, Riccardo
  • Pérez de Lara, David
  • Castellanos-Gómez, Andrés
We present a method to carry out electrical and optoelectronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts with the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the crystal plane) configurations, finding performances comparable to those reported for MoS devices fabricated by the conventional lithographic process. We also show that this method can be used with other 2D materials., We acknowledge funding from the European Commission under the Graphene Flagship, contract CNECTICT-604391, from the EU Horizon 2020 research and innovation program under grant agreement No. 696656 (GrapheneCore1-Graphene-based disruptive technologies), from the FP7 ITN MOLESCO (project no. 606728), from the MINECO (Ramón y Cajal 2014 program RYC-2014-01406, RYC-2014-16626, MAT2014-58399-JIN and FIS2015-67367-C2-1-P), from the Comunidad de Madrid (MAD2D-CM Program (S2013/MIT-3007)) and the NANOFRONTMAG-CM program (S2013/MIT-2850). RF acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515. YN acknowledges the grant from the China Scholarship Council (File no. 201506120102).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-situ formation of one-dimensional coordination polymers in molecular junctions

  • Vladyka, Anton
  • Perrin, Mickael L.
  • Overbeck, Jan
  • Ferradás, R.
  • García-Suárez, Víctor M.
  • Gantenbein, Markus
  • Brunner, Jan
  • Mayor, Marcel
  • Ferrer, Jaime
  • Calame, Michel
We demonstrate the bottom-up in-situ formation of organometallic oligomer chains at the single-molecule level. The chains are formed using the mechanically controllable break junction technique operated in a liquid environment, and consist of alternating isocyano-terminated benzene monomers coordinated to gold atoms. We show that the chaining process is critically determined by the surface density of molecules. In particular, we demonstrate that by reducing the local supply of molecules within the junction, either by lowering the molecular concentration or by adding side groups, the oligomerization process can be suppressed. Our experimental results are supported by ab-initio simulations, confirming that the isocyano terminating groups display a high tendency to form molecular chains, as a result of their high affinity for gold. Our findings open the road for the controlled formation of one-dimensional, single coordination-polymer chains as promising model systems of organometallic frameworks., This work was partially supported the EC FP7-ITN MOLESCO grant (No. 606728). M.P. acknowledges funding by the EMPAPOSTDOCS-II programme which is financed by the European Unions Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement number 754364. J.O. and M.C. gratefully acknowledge financial support from the Swiss Nanoscience Institute. Generous support by the Swiss National Science Foundation (SNF grant No. 00020-159730) is gratefully acknowledged by M.G. and M.M., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Implementing functionality in molecular self-assembled monolayers

  • Kocić, Jelena
  • Blank, D.
  • Abufager, Paula
  • Lorente, Nicolás
  • Decurtins, Silvio
  • Liu, Shi-Xia
  • Repp, Jascha
The planar heterocyclic molecules 1,6,7,12-tetraazaperylene on a Ag(111) metal substrate show different charging characteristics depending on their local environment: next to vacancies in self-assembled islands, molecules can be charged by local electric fields, whereas their charge state is fixed otherwise. This enables the activation of selected molecules inside islands by vacancy creation from scanning-probe-based manipulation. This concept allows for combining the precise mutual atomic-scale alignment of molecules by self-assembly, on one hand, and the implementation of specific functionality into otherwise homogeneous monolayers, on the other. Activated molecules in the direct neighborhood influence each other in their charging characteristics, suggesting their use as molecular quantum cellular automata. Surprisingly, only very few interacting molecules exhibit a rich spectroscopic signature, which offers the prospect of implementing complex functionality in such structures in the future., Financial support from the Deutsche Forschungsgemeinschaft (GRK 1570), the European Commission (EC) FP7 ITN MOLESCO (Project 606728), by MINECO (MAT2015-66888-C3-2-R), and FEDER funds are gratefully acknowledged. We acknowledge computer time provided by the CCT-Rosario Computational Center and the Computational Simulation Center (CSC) for Technological Applications, members of the High Performance Computing National System (SNCAD, MincyT-Argentina)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Allocation of Ambipolar Charges on an Organic Diradical with a Vinylene–Phenylenediyne Bridge

  • Mayorga-Burrezo, Paula
  • Bejarano, Francesc
  • Calbo, Joaquín
  • Zhao, Xiaotao
  • Sousa, J. Alejandro de
  • Lloveras, Vega
  • Bryce, Martin R.
  • Ortí, Enrique
  • Veciana, Jaume
  • Rovira, Concepció
  • Crivillers, Núria
Two redox and magnetically active perchlorotriphenylmethyl (• PTM) radical units have been connected as end-capping groups to a bis(phenylene)diyne chain through vinylene linkers. Negative and positive charged species have been generated, and the influence of the bridge on their stabilization is discussed. Partial reduction of the electron-withdrawing • PTM radicals results in a class-II mixed-valence system with the negative charge located on the terminal PTM units, proving the efficiency of the conjugated chain for the electron transport between the two terminal sites. Counterintuitively, the oxidation process does not occur along the electron-rich bridge but on the vinylene units. The • PTM radicals play a key role in the stabilization of the cationic species, promoting the generation of quinoidal ring segments., This work was supported by the MICINN of Spain (Projects CTQ2016-80030-R, PGC2018-099568-B-I00 (EU Feder Funds), PID2019-111682RB-I00, Severo Ochoa FUNFUTURE CEX2019-000917-S, and María de Maeztu CEX2019- 000919-M), the Generalitat de Catalunya (2017-SGR-918), the Generalitat Valenciana (PROMETEO/2020/077), and the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN) Development Fund. P.M.- B. gratefully thanks financial support from the Juan de la Cierva-Formación 2015 programme (FJCI-2015-23577) supported by MICINN. F.B. thanks the MECD for a predoctoral FPU fellowship. J.C. acknowledges the Generalitat Valenciana (APOSTD/2017/081). J.A.d.S. is enrolled in the Materials Science doctoral program of the UAB. J.A.d.S. thanks the MINECO for the FPI-SO fellowship. The authors acknowledge A. Bernabé from ICMAB for the MALDI-ToF measurements and Dr. Mireia Díaz and Dr. Marta Vilaseca, from the IRB Barcelona Mass Spectrometry and Proteomics Core Facility (unity member of ProteoRed, PRB3-ISCIII, supported by Grant PRB3 (IPT17/0019-ISCIII-SGEFI/ERDF), for the ES+ ToF MS experiments. The work in Durham was supported by the EC FP7 ITN project MOLESCO (606728)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin signatures in the electrical response of graphene nanogaps

  • García-Suárez, Víctor M.
  • García-Fuente, Amador
  • Carrascal, Diego
  • Burzurí, Enrique
  • Koole, Max
  • Zant, Herre S. J. van der
  • El Abbassi, Maria
  • Calame, Michel
  • Ferrer, Jaime
arXiv:1809.07229v1, We analyse the electrical response of narrow graphene nanogaps in search for transport signatures stemming from spin-polarized edge states. We find that the electrical transport across graphene nanogaps having perfectly defined zigzag edges does not carry any spin-related signature. We also analyse the magnetic and electrical properties of nanogaps whose electrodes have wedges that possibly occur in the currently fabricated nanogaps. These wedges can host spin polarized wedge low-energy states due to the bipartite nature of the graphene lattice. We find that these spin-polarized low-energy modes give rise to low-voltage signatures in the differential conductance and to distinctive features in the stability diagrams. These are caused by fully spin-polarized currents., JF, AGF, VMGS and DC acknowledge funding by the Spanish MICINN through the grants FIS2012-34858 and FIS2015-63918-R. EB thanks funds from the EU FP7 program through Project 618082 ACMOL and the H2020-MSCA-IF 746579. Research at Delft was supported by NOW/OCW and an ERC advanced grant (Mols@Mols; HvdZ). Support by the EU FP7-ITN MOLESCO grant (no. 606728) and the EU H2020 RIA QuIET grant (no. 767187) is also gratefully acknowledged., Peer reviewed
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Gate tunable photovoltaic effect in MoS2 vertical p-n homostructures

  • Svatek, Simon Aurel|||0000-0002-8104-1888
  • Antolín Fernández, Elisa|||0000-0002-5220-2849
  • Lin, Der-Yuh
  • Frisenda, Riccardo
  • Reuter, Christoph
  • Molina Mendoza, Aday J.
  • Muñoz Sánchez, Manuel
  • Agrait, Nicolas
  • Ko, Tsung-Shine
  • Pérez de Lara, David
  • Castellanos Gómez, Andres
RUO. Repositorio Institucional de la Universidad de Oviedo
Publicación Artículo científico (JournalArticle)

Thermoelectricity in vertical graphene-C60-graphene architectures

  • Wu, Qingqing
  • Sadeghi, Hatef
  • García Suárez, Víctor Manuel|||0000-0002-7392-4648
  • Ferrer Rodríguez, Jaime|||0000-0002-4067-2325
  • Lambert, Colin J.
Quantum Effects in Electronic Nanodevices (QuEEN); UK EPSRC [EP/M014452/1, EP/N017188/1]; Spanish Ministerio de Economía y Competitividad [FIS2012-34858, FIS2015-63918-R]; European Commission FP7 ITN "MOLESCO" [606728]
RUO. Repositorio Institucional de la Universidad de Oviedo
Publicación Artículo científico (JournalArticle)

Systematic pseudopotentials from reference eigenvalue sets for DFT calculations

  • Rivero, Pablo
  • García Suárez, Víctor Manuel|||0000-0002-7392-4648
  • Pereñiguez, David
  • Ferrer Rodríguez, Jaime|||0000-0002-4067-2325
Acknowledge partial support from the Arkansas Biosciences Institute. V.M.G.S. and J.F. acknowledge funding from the Spanish MICINN, Grant FIS2012-34858, and European Commission FP7 ITN ‘‘MOLESCO’’ (Grant No. 606728). V.M.G.S. thanks the Spanish Ministerio de Economía y Competitividad for a Ramón y Cajal fellowship (RYC-2010-06053), Y.Y. and L.B. thank ONR (Grants N00014-11-1-0384 and N00014-12-1-1034), and K.P. acknowledges funding from the National Science Foundation (DMR-1206354). Calculations were performed at TACC (Stampede), (Grants NSF-XSEDE TG-PHY090002 and TG-DMR140052), and Arkansas (Razor)., Rivero, P., García-Suárez, V.M., Pereñiguez, D., Utt, K., Yang, Y., Bellaiche, L., Park, K., Ferrer, J., Barraza-Lopez, S.