Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photodiodes based in La0.7Sr0.3MnO3/single layer MoS2 hybrid vertical heterostructures

  • Niu, Yue
  • Frisenda, Riccardo
  • Svatek, Simon A.
  • Orfila, Gloria
  • Gallego-Marcos, Fernando
  • Gant, Patricia
  • Agra, Nicolás
  • León, Carlos
  • Rivera-Calzada, Alberto
  • Pérez de Lara, David
  • Santamaría, Jacobo
  • Castellanos-Gómez, Andrés
The fabrication of artificial materials by stacking of individual two-dimensional (2D) materials is amongst one of the most promising research avenues in the field of 2D materials. Moreover, this strategy to fabricate new man-made materials can be further extended by fabricating hybrid stacks between 2D materials and other functional materials with different dimensionality making the potential number of combinations almost infinite. Among all these possible combinations, mixing 2D materials with transition metal oxides can result especially useful because of the large amount of interesting physical phenomena displayed separately by these two material families. We present a hybrid device based on the stacking of a single layer MoS onto a lanthanum strontium manganite (LaSrMnO) thin film, creating an atomically thin device. It shows a rectifying electrical transport with a ratio of 10, and a photovoltaic effect with V up to 0.4 V. The photodiode behaviour arises as a consequence of the different doping character of these two materials. This result paves the way towards combining the efforts of these two large materials science communities., Work at IMDEA was supported by MINECO (Ramón y Cajal 2014 program RYC-2014-01406, MAT2014-58399-JIN, FIS2015-67367-C2-1-P), the Comunidad de Madrid (MAD2D-CM Program (S2013/MIT-3007)) and NANOFRONTMAG-CM program (S2013/MIT-2850) and the European Commission under the Graphene Flagship (contract CNECTICT-604391) and FP7 ITN MOLESCO (project no. 606728). RF acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515. YN acknowledges the grant from the China Scholarship Council (File NO. 201506120102). Work at UCM supported by Spanish MINECO through grants MAT2014-52405-C02-01 and by CAM through grant CAM S2013/MIT-2740. Work at ICMM is supported by Spanish MINECO through grant MAT2014-52405-C02-02.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large magnetoelectric coupling near room temperature in synthetic melanostibite Mn2FeSbO6

  • Dos Santos-García, Antonio J.
  • Solana-Madruga, Elena
  • Ritter, Clemens
  • Andrada-Chacón, Adrián
  • Sánchez-Benítez, J.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Sáez-Puche, Regino
  • Schmidt, Rainer
Multiferroic materials exhibit two or more ferroic orders and have potential applications as multifunctional materials in the electronics industry. A coupling of ferroelectricity and ferromagnetism is hereby particularly promising. We show that the synthetic melanostibite mineral MnFeSbO (R (Formula presented.) space group) with ilmenite-type structure exhibits cation off-centering that results in alternating modulated displacements, thus allowing antiferroelectricity to occur. Massive magnetoelectric coupling (MEC) and magnetocapacitance effect of up to 4000 % was detected at a record high temperature of 260 K. The multiferroic behavior is based on the imbalance of cationic displacements caused by a magnetostrictive mechanism, which sets up an unprecedented example to pave the way for the development of highly effective MEC devices operational at or near room temperature., The authors thank MINECO for funding through projects MAT2013‐44964‐R, MAT2013‐41099‐R, MAT2015‐71070‐REDC, MAT2014‐52405‐C02‐02, CTQ2015‐67755‐C2‐1‐R (MINECO/FEDER) and FPI (BES‐2013‐066112) and Ramon y Cajal (RyC‐2010–06276) fellowships, and Comunidad de Madrid through S‐2013/MIT‐2753 grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modified magnetic anisotropy at LaCoO3/La0.7Sr0.3MnO3 interfaces

  • Cabero, Mariona
  • Nagy, K.
  • Gallego, Fernando
  • Sander, A.
  • Rio, M.
  • Cuellar, Fabián A.
  • Tornos, Javier
  • Hernandez-Martin, D.
  • Nemes, N. M.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Rivera-Calzada, A.
  • Sefrioui, Z.
  • Reyren, N.
  • Feher, T.
  • Varela, M.
  • León, Carlos
  • Santamaría, Jacobo
Controlling magnetic anisotropy is an important objective towards engineering novel magnetic device concepts in oxide electronics. In thin film manganites, magnetic anisotropy is weak and it is primarily determined by the substrate, through induced structural distortions resulting from epitaxial mismatch strain. On the other hand, in cobaltites, with a stronger spin orbit interaction, magnetic anisotropy is typically much stronger. In this paper, we show that interfacing LaSrMnO (LSMO) with an ultrathin LaCoO (LCO) layer drastically modifies the magnetic anisotropy of the manganite, making it independent of the substrate and closer to the magnetic isotropy characterizing its rhombohedral structure. Ferromagnetic resonance measurements evidence a tendency of manganite magnetic moments to point out-of-plane suggesting non collinear magnetic interactions at the interface. These results may be of interest for the design of oxide interfaces with tailored magnetic structures for new oxide devices., Work at UCM supported by Spanish MINECO through Grant Nos. MAT2014-52405-C02-01 and MAT2014-52405-C02-02 and by CAM through Grant No. CAM S2013/MIT-2740. M.V. and M.C. acknowledge support from Fundación BBVA and from MINECO through Grant No. MAT2015-066888-C3-3-R. J.S. thanks the University Paris-Saclay (D’Alembert program) and CNRS for financing his stay at CNRS/Thales. T.F. acknowledges support from the Hungarian Research Fund OTKA No. K107228., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective anisotropies in magnetic nanowires using the torque method

  • Rotarescu, C.
  • Moreno, R.
  • Fernández-Roldán, José A.
  • Trabada, D. G.
  • Nemes, N. M.
  • Fehér, T.
  • Bran, Cristina
  • Vázquez Villalabeitia, Manuel
  • Chiriac, H.
  • Lupu, N.
  • Óvári, T. A.
  • Chubykalo-Fesenko, O.
The effective anisotropy of Co-based nanowires such as CoFe, monocrystalline hcp Co and polycrystalline Co with a mixture of fcc and hcp grains has been evaluated through micromagnetic modeling based on the magnetization torque simulations. We retrieve the experimental profile of the torque curves and show that the non-harmonic forms observed at low fields correspond to the presence of open vortices at the nanowire ends. Our results show that strong hcp anisotropy of Co cannot overcome the uniaxial character of the effective anisotropy which always remains parallel to the nanowire axis, even in the case of magnetocrystalline easy axis perpendicular to the nanowire. We evaluate effective anisotropy values for monocrystalline Co nanowires with different easy axis orientations and polycrystalline Co nanowires with different mixtures of hcp and fcc grains., Work supported by the Romanian Executive Agency for Higher Education, Research, Development and Innovation Funding (UEFISCCDI) under project PN 16 37 02 02 (Nucleu Program) and by the European Commission under Grant no. 316194 (NANOSENS). The work of R.M., N.N., M.V and O.C. F was partially supported by Spanish MINECO Grant MAT2016-76824-C3-1-R, MAT2014-52405-C02-02 and MAT2013-48054-C2-1-R. The work of T.F. was partially supported by the Hungarian research fund OTKA K 107228.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Resonant electron tunnelling assisted by charged domain walls in multiferroic tunnel junctions

  • Sanchez-Santolino, Gabriel
  • Tornos, Javier
  • Hernandez-Martin, David
  • Beltrán, Juan I.
  • Munuera, C.
  • Cabero, Mariona
  • Perez-Muñoz, Ana
  • Ricote, J.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Sefrioui, Zouhair
  • León, Carlos
  • Pennycook, Steve J.
  • Muñoz, M. Carmen
  • Varela, M.
  • Santamaría, Jacobo
The peculiar features of domain walls observed in ferroelectrics make them promising active elements for next-generation non-volatile memories, logic gates and energy-harvesting devices. Although extensive research activity has been devoted recently to making full use of this technological potential, concrete realizations of working nanodevices exploiting these functional properties are yet to be demonstrated. Here, we fabricate a multiferroic tunnel junction based on ferromagnetic LaSrMnO electrodes separated by an ultrathin ferroelectric BaTiO tunnel barrier, where a head-to-head domain wall is constrained. An electron gas stabilized by oxygen vacancies is confined within the domain wall, displaying discrete quantum-well energy levels. These states assist resonant electron tunnelling processes across the barrier, leading to strong quantum oscillations of the electrical conductance., Work supported by Spanish MINECO through grants MAT2014-52405-C02-01 and MAT2014-52405-C02-02, MAT2015-066888-C3-1-R, MAT2015-066888-C3-3-R (MINECO/FEDER) and CAM S2013/MIT-2740. Research at ORNL sponsored by the US Department of Energy (DOE), Basic Energy Sciences (BES), M.V. acknowledges support from Fundación BBVA. G.S. and M.C. acknowledge support from ERC Starting Investigator Grant #239739 STEMOX. J.I.B. acknowledges the Spanish Supercomputing Network (RES) and CeSViMa (project FI-2016-2-0006). J.S. thanks Université Paris Saclay (DÁlembert Program) and CNRS for financing his stay at CNRS Thales.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring nanostructured surfaces with plasmonic/magnetic multifunctional response

  • Serrano Rubio, Aída
  • Rodríguez de la Fuente, Óscar
  • García-Hernández, Mar
  • Campo, G.
  • de Julián Fernández, C.
  • Fernández Lozano, José Francisco
  • García García-Tuñón, Miguel Ángel
[EN] In this work, we present an innovative way to functionalize large surfaces combining both plasmonic and magnetic nanoparticles on a substrate, by the growth of bilayers and a subsequent single annealing. In particular, we show here the formation of Au and γ-FeO nanoparticles using this route. Thermal treatments promote the nanostructuration of the film plus a partial oxidation of Fe to form ferrimagnetic oxides. For this purpose, annealing conditions and the structure of the bilayer must be selected to achieve an optimal nanostructuration, avoiding the full oxidation of Fe to form antiferromagnetic hematite., Project supported by a 2016 BBVA Foundation Grant for Researchers and Cultural Creators. This work has been also supported by the Ministerio Español de Economía y Competitividad (MINECO) through the projects MAT2017-86540-C4-1-R, MAT2014-52405-C02-02 and CSIC 20150E068. A. S. acknowledges the Comunidad de Madrid for the financial support (grant nº 2017-t2/IND-5395).