Pasar al contenido principal

NANOHILOS MAGNETICOS Y SUS REDES TRIDIMENSIONALES PARA TECNOLOGIAS AVANZADAS

MAT2013-48054-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A comparative study of magnetic properties of large diameter Co nanowires and nanotubes

  • Fernández-Roldán, José A.
  • Chrischon, Dieivase
  • Dorneles, Lucio Strazzabosco
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
  • Bran, Cristina
A comparative study of the magnetic properties of the arrays of Co nanowires and nanotubes with large external diameters (180 nm) has been carried out. The nanowires/nanotubes were grown by electrodeposition into the self-assembled pores of anodic alumina membranes. The experimental study of their magnetic behavior was focused on the angular dependence of hysteresis loops and their parameters. In both nanowire and nanotube arrays, from the analysis of experimental data, effective longitudinal magnetic anisotropy is concluded, which is stronger in the case of the nanotube array. In addition, the extremely small remanence observed for all loops indicates the important role played by magnetostatic interactions. Micromagnetic simulations were first performed considering intrinsic shape and magnetocrystalline anisotropy terms, together with an effective easy-plane anisotropy to account for those magnetostatic interactions. A qualitative agreement between experiments and simulations is found despite the complexity introduced by the intrinsic and extrinsic array properties (i.e., large diameters, grain structure, and array configuration). In addition, simulations were also carried out for individual nanowire/nanotube with a particular emphasis to understand their differences at the remanence, due to pure geometry contribution., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) under the grants MAT2016-76824-C3-1-R and FIS2016-78591-C3-3-R, and the Regional Government of Madrid under project under project S2013/MIT2850 NANOFRONTMAG-CM.; D.C. and L.S.D. acknowledge Brazilian PDSE Doctoral Programme and Bolsista da CAPES - Proc. n° BEX 7845/14-6.; L.S.D. acknowledges support from Brazilian agency CNPq (Grant 302950/2017-6). J.A. F.-R. acknowledges the support from MINECO and European Social Fund though fellowship BES-2014-068789., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetization reversal dependence on effective magnetic anisotropy in electroplated Co-Cu nanowire arrays

  • García, J.
  • Prida, V. M.
  • Vivas, Laura G.
  • Hernando, B.
  • Barriga-Castro, E.D.
  • Mendoza-Reséndez, Raquel
  • Luna, C.
  • Escrig, J.
  • Vázquez Villalabeitia, Manuel
Arrays of Co(100−x)Cu(x) (0 ≤ x ≤ 27) nanowires with 45 nm of diameter and 18 μm in length have been potentiostatically electrodeposited into the hexagonally self-assembled nanopores of anodic alumina membranes. The structural characterization of Co–Cu nanowires confirms the coexistence of both hcp and fcc crystalline phases, with textures that are strongly affected by the fractional content of Cu. Parallel magnetic studies of the room temperature magnetization process by First Order Reversal Curve (FORC) analysis and the angular dependence of coercivity confirm the presence of two coexisting ferromagnetic phases on intermediate Cu content nanowires, ascribed to a softer magnetic phase for pure Co and a harder magnetic one for the Co–Cu composition alloy, respectively. The temperature dependence of coercivity and remanence reveal a reorientation of the effective magnetic anisotropy with the addition of Cu to the Co–Cu alloy nanowires, being enhanced by the coexistence of the two ferromagnetic phases., Financial support from Spanish MICINN under research projects No. MAT2010-20798-C05-01 and 04, and MINECO research Projects No. MAT2013-48054-C2-1-R and 2-R, and MAT2013-47231-C2-1-P is gratefully acknowledged. Mexican funding from the Mexican Council of Science and Technology (CONACYT) and Universidad Autónoma de Nuevo León under research projects CB12-179486 and PAICYT-CE793-11 is also acknowledged. J. Escrig thanks Fondecyt project 1150952 and Basal FB0807. J. García thanks FICYT for a ‘‘Severo Ochoa’’ fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct imaging of the magnetic polarity and reversal mechanism in individual Fe3-xO4 nanoparticles

  • Moya, Carlos
  • Iglesias-Freire, Óscar
  • Pérez, Nicolás
  • Batlle, Xavier
  • Labarta, Amilcar
  • Asenjo Barahona, Agustina
This work reports on the experimental characterization of the magnetic domain configurations in cubic, isolated Fe3-xO4 nanoparticles with a lateral size of 25-30 nm. The magnetic polarity at remanence of single domain ferrimagnetic Fe3-xO4 nanoparticles deposited onto a carbon-silicon wafer is observed by magnetic force microscopy. The orientations of these domains provide a direct observation of the magneto-crystalline easy axes in each individual nanoparticle. Furthermore, the change in the domain orientation with an external magnetic field gives evidence of particle magnetization reversal mediated by a coherent rotation process that is also theoretically predicted by micromagnetic calculations., This work was supported by Spanish MINECO (MAT2012-33037, CSD2010-00024 and MAT2013-48054-C2) and Catalan DURSI (2009SGR856, 2014SGR220).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superparamagnetic versus blocked states in aggregates of Fe3-xO4 nanoparticles studied by MFM

  • Moya, Carlos
  • Iglesias-Freire, Óscar
  • Batlle, Xavier
  • Labarta, Amilcar
  • Asenjo Barahona, Agustina
Magnetic domain configurations in two samples containing small aggregates of FeO nanoparticles of about 11 and 49 nm in size, respectively, were characterized by magnetic force microscopy (MFM). Two distinct magnetic behaviors were observed depending on the particle size. The aggregates constituted of nanoparticles of about 11 nm in size showed a uniform dark contrast on MFM images, reflecting the predominant superparamagnetic character of these particles and arising from the coherent rotation of the spins within the aggregate as the latter align along the tip stray-field. By applying a variable in-plane field, it is possible to induce magnetic polarization yielding an increasing dark/bright contrast as the strength of the applied field overcomes the stray-field of the tip, although this polarization completely disappears as the remanent state is recovered when the magnetic field is switched off. On the contrary, for aggregates of NPs of about 49 nm in size, dark/bright contrast associated with the existence of magnetic domains and magnetic polarization prevails in MFM images all along the magnetic cycle due to the blocking state of the magnetization of these larger particles, even in the absence of an applied field. All in all, we unambiguously demonstrate the capabilities of magnetic force microscopy to distinguish between blocked and superparamagnetic states in the aggregates of magnetic nanoparticles. Micromagnetic simulations strongly support the conclusions stated from the MFM experiments., This work was supported by Spanish MINECO (MAT2012-33037, CSD2010-00024 and MAT2013-48054-C2) and Catalan DURSI (2014SGR220).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin configuration in isolated FeCoCu nanowires modulated in diameter

  • Iglesias-Freire, Óscar
  • Bran, Cristina
  • Berganza, Eider
  • Mínguez-Bacho, I.
  • Magén, César
  • Vázquez Villalabeitia, Manuel
  • Asenjo Barahona, Agustina
Cylindrical Fe28Co67Cu5 nanowires modulated in diameter between 22 and 35 nm are synthesized by electroplating into the nanopores of alumina membranes. High-sensitivity MFM imaging (with a detection noise of 1 μN m−1) reveals the presence of single-domain structures in remanence with strong contrast at the ends of the nanowires, as well as at the transition regions where the diameter is modulated. Micromagnetic simulations suggest that curling of the magnetization takes place at these transition sites, extending over 10–20 nm and giving rise to stray fields measurable with our MFM. An additional weaker contrast is imaged, which is interpreted to arise from inhomogeneities in the nanowire diameter., The authors acknowledge support from the Spanish MINECO under projects CSD2010-00024 and MAT2013-48054-C2-1-R and from the EU commission under project 'REFREEPERMAG' FP7NMP.2011.2.2. info:eu-repo/grantAgreement/EC/FP7/280670
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vortex domain wall propagation in periodically modulated diameter FeCoCu nanowire as determined by the magneto-optical Kerr effect

  • Palmero, Ester M.
  • Bran, Cristina
  • Pérez del Real, Rafael
  • Vázquez Villalabeitia, Manuel
Control over the magnetization reversal process of nanowires is essential to current advances in modern spintronic media and magnetic data storage. Much effort has been devoted to permalloy nanostrips with rectangular cross section and vanishing crystalline anisotropy. Our aim was to unveil and control the reversal process in FeCoCu nanowires with significant anisotropy and circular cross section with tailored periodical modulations in diameter. Magneto-optical Kerr effect measurements and their angular dependence performed on individual nanowires together with their analysis allow us to conclude that the demagnetization process takes place due to the propagation of a single vortex domain wall which is eventually pinned at given modulations with slightly higher energy barrier. In addition these results create new expectations for further controlling of the propagation of single and multiple domain walls., The authors acknowledge support from the Spanish National Research Council under project 201460E014, from the Spanish Ministerio de Economia y Competitividad under project no. MAT2013-48054-C2-1-R, and from the European Community's 7th Framework Program under project no. REFREEPERMAG, grant agreement no. 280670. info:eu-repo/grantAgreement/EC/FP7/280670
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the magnetic properties of Co-ferrite nanoparticles through the 1,2-hexadecanediol concentration in the reaction mixture

  • Moya, Carlos
  • Morales, María Del Puerto
  • Batlle, Xavier
  • Labarta, Amilcar
This work reports on the effect of the 1,2-hexadecanediol content on the structural and magnetic properties of CoFe2O4 nanoparticles synthesized by thermal decomposition of metal–organic precursors in 1-octadecene. Although pseudo-spherical particles having an average size of about 8 nm and similar stoichiometry have been observed in all studied samples, a high level of variability in the crystal quality and, in turn, in the magnetic properties has been found as a function of the amount of 1,2-hexadecanediol added to the reaction mixture. The magnetic study reveals that samples progress from glassy magnetic behavior to bulk-like, ferrimagnetic order as the crystal quality improves. The analysis of the reaction mixtures by Fourier transform infrared spectroscopy at various stages of the reaction shows the key role of the 1,2-hexadecanediol in favoring the decomposition of the metal–organic precursor, formation of an intermediate Co2+Fe3+–oleate complex and, finally, the nucleation of nanoparticles at lower temperatures., This work was supported by Spanish MINECO (MAT2011-23641, MAT2012-33037, MAT2013-48054-C2), Catalan DURSI (2014SGR220) and European Union FEDER funds (Una manera de hacer Europa). C. Moya acknowledges Spanish MINECO for a PhD contract (BES-2010-038075) and a three month stay at the ICMM-CSIC (Madrid).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic force microscopy in liquids

  • Ares, P.
  • Jaafar, Miriam
  • Gil, A.
  • Gómez-Herrero, J.
  • Asenjo Barahona, Agustina
In this work, the use of magnetic force microscopy (MFM) to acquire images of magnetic nanostructures in liquid environments is presented. Optimization of the MFM signal acquisition in liquid media is performed and it is applied to characterize the magnetic signal of magnetite nanoparticles. The ability for detecting magnetic nanostructures along with the well‐known capabilities of atomic force microscopy in liquids suggests potential applications in fields such as nanomedicine, nanobiotechnology, or nanocatalysis., This work was supported by Consolider CSD2010‐0024, MAT2013‐46753‐C2‐2‐P, and MAT2013‐48054‐C2‐1 projects.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin configuration of cylindrical bamboo-like magnetic nanowires

  • Bran, Cristina
  • Berganza, Eider
  • Palmero, Ester M.
  • Fernández-Roldán, José A.
  • Pérez del Real, Rafael
  • Aballe, Lucía
  • Foerster, Michael
  • Asenjo Barahona, Agustina
  • Fraile Rodríguez, A.
  • Vázquez Villalabeitia, Manuel
The surface and the internal magnetic structure of bamboo-like cylindrical nanowires with tailored diameter modulations have been determined exploiting the direct photoemission and transmission contrasts using photoemission electron microscopy combined with X-ray magnetic circular dichroism, as well as complementary magnetic force microscopy and micromagnetic simulations. Bamboo-like cylindrical nanowires with diameters of 130 and 140 nm, and a modulation periodicity of 400 nm were electrochemically grown into the pores of alumina templates. FeCoCu and Co nanowires were selected to offer parallel and perpendicular magnetization easy axis, respectively. For FeCoCu nanowires, a main longitudinal magnetization configuration is found consistent with the predominant shape anisotropy. In addition, a weaker modulated contrast along the wires' axis is observed that matches the position of each diameter modulation: vortex-like structures are observed at the ends of the wires and at the surface around the modulations. In Co nanowires, a multi-segmented vortex-like structure with alternating opposite chirality is found not matching the periodicity of the diameter modulations. Such a spin configuration is interpreted considering that Co nanowires exhibit hexagonal symmetry with c axis nearly perpendicular to the nanowires defining strong uniaxial transverse magnetocrystalline anisotropy., The study has been performed under the framework of the projects MAT2013-48054-C2-1-R and CSD2010-00024 supported by the MINECO from Spain. A.F.R. acknowledges financial support from the Spanish MICINN through the Ramón y Cajal Programme. J. A. F.-R. acknowledges financial support from MINECO and the European Social Fund through the “Ayudas para contratos predoctorales para la formación de doctores 2014”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced magnetocrystalline anisotropy of Fe30Co70 nanowires by Cu additives and annealing

  • Palmero, Ester M.
  • Salikhov, Ruslan
  • Wiedwald, Ulf
  • Bran, Cristina
  • Spasova, Marina
  • Vázquez Villalabeitia, Manuel
  • Farle, Michael
The use of 3d transition metal-based magnetic nanowires (NWs) for permanent magnet applications requires large magnetocrystalline anisotropy energy (MAE), which in combination with the NWs' magnetic shape anisotropy yields magnetic hardening and an enhancement of the magnetic energy product. Here, we report on the significant increase in MAE by 125 kJ m in FeCo NWs with diameters of 20-150 nm embedded in anodic aluminum oxide templates by adding 5 at.% Cu and subsequent annealing at 900 K. Ferromagnetic resonance (FMR) reveals that this enhancement of MAE is twice as large as the enhancement of MAE in annealed, but undoped NWs. X-ray diffraction (XRD) analysis suggests that upon annealing the immiscible Cu in FeCo NWs causes a crystal reorientation with respect to the NW axis with a considerable distortion of the bcc FeCo lattice. This strain is most likely the origin of the strongly enhanced MAE., The work has been partially supported by the Spanish National Research Council under Project 201460E014 and by the Spanish 'Ministerio de Economia y Competitividad' under Project MAT2013-48054-C2-1-R. EMP acknowledges the DAAD grant that supported her research stay at the University of Duisburg-Essen.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic interactions in compositionally modulated nanowire arrays

  • Palmero, Ester M.
  • Béron, Fanny
  • Bran, Cristina
  • Pérez del Real, Rafael
  • Vázquez Villalabeitia, Manuel
Series of high hexagonally ordered compositionally modulated nanowire arrays, with different Cu layer and FeCoCu segment thicknesses and a constant diameter of 35 nm, were fabricated by electroplating from a single electrolytic bath into anodic aluminum oxide membranes. The objective of the study was to determine the influence of ferromagnetic (FM) segment and non-ferromagnetic (NFM) layer thickness on the magnetic properties, particularly coercivity and magnetic interactions. First-order reversal curve (FORC) measurements and simulations were performed to quantify the effect of the inter-/intra-nanowire magnetostatic interactions on the coercivity and interaction field distributions. The FORC coercivity increases for a thick NFM layer and long FM segments due to decoupling of the the FM segments and the increased shape anisotropy, respectively. On the other hand, the interaction field presents a parallel strong reduction for a thick NFM layer and thin FM segments, which is ascribed to a similar NFM/FM thickness ratio and degree of FM segment decoupling along the nanowire., The authors acknowledge financial support from the Spanish National Research Council under project 201460E014 and from the Spanish Ministerio de Economia y Competitividad under project MAT2013-48054-C2-1-R. FB acknowledges financial support from the Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Domain wall pinning in FeCoCu bamboo-like nanowires

  • Berganza, Eider
  • Bran, Cristina
  • Jaafar, Miriam
  • Vázquez Villalabeitia, Manuel
  • Asenjo Barahona, Agustina
The three dimensional nature of cylindrical magnetic nanowires has opened a new way to control the domain configuration as well as the magnetization reversal process. The pinning effect of the periodic diameter modulations on the domain wall propagation in FeCoCu individual nanowires is determined by Magnetic Force Microscopy, MFM. A main bistable magnetic configuration is firstly concluded from MFM images characterized by the spin reversal between two nearly single domain states with opposite axial magnetization. Complementary micromagnetic simulations confirm a vortex mediated magnetization reversal process. A non-standard variable field MFM imaging procedure allows us to observe metastable magnetic states where the propagating domain wall is pinned at certain positions with enlarged diameter. Moreover, it is demonstrated that it is possible to control the position of the pinned domain walls by an external magnetic field., We acknowledge the support from the Spanish Ministerio de Economia y Competitividad under project no. MAT2013-48054-C2-1-R, Consolider CSD2010-00024 and from the European Community’s 7th Framework Program, project REFREEPERMAG, grant agreement no 280670.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single crystalline cylindrical nanowires-toward dense 3D arrays of magnetic vortices

  • Ivanov, Yu P.
  • Chuvilin, Andrey
  • Vivas, Laura G.
  • Kosel, Jürgen
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
Magnetic vortex-based media have recently been proposed for several applications of nanotechnology; however, because lithography is typically used for their preparation, their low-cost, large-scale fabrication is a challenge. One solution may be to use arrays of densely packed cobalt nanowires that have been efficiently fabricated by electrodeposition. In this work, we present this type of nanoscale magnetic structures that can hold multiple stable magnetic vortex domains at remanence with different chiralities. The stable vortex state is observed in arrays of monocrystalline cobalt nanowires with diameters as small as 45 nm and lengths longer than 200 nm with vanishing magnetic cross talk between closely packed neighboring wires in the array. Lorentz microscopy, electron holography and magnetic force microscopy, supported by micromagnetic simulations, show that the structure of the vortex state can be adjusted by varying the aspect ratio of the nanowires. The data we present here introduce a route toward the concept of 3-dimensional vortex-based magnetic memories., O.C.-F. and M.V. acknowledge support from the Spanish Ministry of Economy and Competitiveness under the grants MAT2013-47078-C2-2-P and MAT2013-48054-C2-1-R. J.K. and Y.P.I. acknowledge support from King Abdullah University of Science and Technology (KAUST) and the Saudi Arabia Basic Industries Corporation (SABIC). A.C. acknowledges support from the Spanish Ministry of Science and Education, Consolider-Ingenio 2010 Program, Project No. CSD2006-53 and the Basque Government, ETORTEK Program, Project No. IE09-243.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable magnetic nanowires for biomedical and harsh environment applications

  • Ivanov, Yu P.
  • Alfadhel, Ahmed
  • Alnassar, Mohammed
  • Perez, Jose E.
  • Vázquez Villalabeitia, Manuel
  • Chuvilin, A.
  • Kosel, Jürgen
We have synthesized nanowires with an iron core and an iron oxide (magnetite) shell by a facile low-cost fabrication process. The magnetic properties of the nanowires can be tuned by changing shell thicknesses to yield remarkable new properties and multi-functionality. A multi-domain state at remanence can be obtained, which is an attractive feature for biomedical applications, where a low remanence is desirable. The nanowires can also be encoded with different remanence values. Notably, the oxidation process of single-crystal iron nanowires halts at a shell thickness of 10 nm. The oxide shell of these nanowires acts as a passivation layer, retaining the magnetic properties of the iron core even during high-temperature operations. This property renders these core-shell nanowires attractive materials for application to harsh environments. A cell viability study reveals a high degree of biocompatibility of the core-shell nanowires., Research reported in this publication was supported by the King Abdullah University of Science and Technology (KAUST). Support from Spanish MINECO under project MAT2013-48054-C2-1-R is also acknowledged. This paper contains results and findings of a research project partly funded by King Abdulaziz City for Science and Technology (KACST), Grant No. KACST GDRG AT-34-151., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Identifying weakly-interacting single domain states in Ni nanowire arrays by FORC

  • Proenca, Mariana P.
  • Sousa, Célia T.
  • Ventura, Joao
  • García, Javier
  • Vázquez Villalabeitia, Manuel
  • Araujo, Joao P.
The control and understanding of magnetization reversal mechanisms and magnetostatic interactions in nanomagnet arrays is a critical point that has to be overcome in order to reach industrial applications. However, usual magnetic characterization techniques can only provide information on the overall array behaviour and are not able to discriminate relevant local properties. In this work, we show that the first-order reversal curve (FORC) method is a unique tool to identify weakly-interacting uniaxial single domain (SD) particles in systems with complex mixed magnetic states. We compare the FORC diagrams of two sets of Ni nanowire (NW) arrays electrodeposited in hexagonally ordered nanoporous alumina templates: A) with a uniform length distribution (interacting SD particles), and B) with a non-uniform length distribution. For non-uniform length distributions, regions of isolated NWs occur in the array, creating a complex mixture of strongly and weakly-interacting SD particles. These weakly-interacting NWs are here identified by a characteristic ridge along the coercive field axis of the FORC diagram. Micromagnetic simulations confirmed the presence of this weakly-interacting magnetic behaviour in the array with non-uniform length distributions. Combining FORC results with micromagnetic simulations, we show that the magnetization reversal of interacting wires occurs by the nucleation of transverse domain walls at the NWs' ends, while isolated wires nucleate vortex domain walls. This work thus highlights the importance of the FORC method for the accurate identification and understanding of local magnetic behaviours in nanomagnet arrays., MPP and CTS acknowledge FCT for grants SFRH/BPD/84948/2012 and SFRH/BPD/82010/2011, respectively, supported by funding POPH/FSE. JV acknowledges financial support through FSE/POPH and PTDC/CTM-NAN/3146/2014. The authors acknowledge funding from FCT through the Associated Laboratory IN and project UID/NAN/50024/2013, from FEDER and ON2 through project Norte-070124-FEDER-000070, from Spanish MINECO under project MAT2013-48054-C2-1-R and from Comunidad Madrid under project Nanofrontmag S2103/MIT-2850.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective anisotropies in magnetic nanowires using the torque method

  • Rotarescu, C.
  • Moreno, R.
  • Fernández-Roldán, José A.
  • Trabada, D. G.
  • Nemes, N. M.
  • Fehér, T.
  • Bran, Cristina
  • Vázquez Villalabeitia, Manuel
  • Chiriac, H.
  • Lupu, N.
  • Óvári, T. A.
  • Chubykalo-Fesenko, O.
The effective anisotropy of Co-based nanowires such as CoFe, monocrystalline hcp Co and polycrystalline Co with a mixture of fcc and hcp grains has been evaluated through micromagnetic modeling based on the magnetization torque simulations. We retrieve the experimental profile of the torque curves and show that the non-harmonic forms observed at low fields correspond to the presence of open vortices at the nanowire ends. Our results show that strong hcp anisotropy of Co cannot overcome the uniaxial character of the effective anisotropy which always remains parallel to the nanowire axis, even in the case of magnetocrystalline easy axis perpendicular to the nanowire. We evaluate effective anisotropy values for monocrystalline Co nanowires with different easy axis orientations and polycrystalline Co nanowires with different mixtures of hcp and fcc grains., Work supported by the Romanian Executive Agency for Higher Education, Research, Development and Innovation Funding (UEFISCCDI) under project PN 16 37 02 02 (Nucleu Program) and by the European Commission under Grant no. 316194 (NANOSENS). The work of R.M., N.N., M.V and O.C. F was partially supported by Spanish MINECO Grant MAT2016-76824-C3-1-R, MAT2014-52405-C02-02 and MAT2013-48054-C2-1-R. The work of T.F. was partially supported by the Hungarian research fund OTKA K 107228.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A colloidally stable water dispersion of Ni nanowires as an efficient: T 2-MRI contrast agent

  • Bañobre-López, Manuel
  • Bran, Cristina
  • Rodríguez-Abreu, Carlos
  • Gallo, Juan
  • Vázquez Villalabeitia, Manuel
  • Rivas, José
A colloidally stable dispersion of anisotropic Ni nanowires in water has been achieved showing good performance as a T-contrast agent in magnetic resonance imaging (MRI). A wet chemistry approach has been developed that renders water dispersible Ni nanowires of controlled size. Firstly, an array of Ni/Au multilayer nanowires of tailored dimensions was synthesized by pulsed electrodeposition within a porous alumina template in a three-electrode cell at room-temperature. Then, Ni/Au multilayer nanowires were released from the template followed by the isolation of the Ni segments through a two-step acidic etching, ending up with a colloidally stable dispersion of poly-acrylic acid (PAA)-coated Ni nanowires in water solution. The PAA-coated Ni nanowires have been morphologically and structurally characterized by scanning and transmission electron microscopy (SEM, TEM, respectively), whereas their ferromagnetic properties were studied using a SQUID-magnetometer. Importantly, relaxivity properties (transversal relaxivity, r) indicated good performance of PAA-coated Ni nanowires as a T-contrast agent at 1.41 T and body temperature, with values as large as those of commercial contrast agents based on iron oxide nanoparticles. MRI phantom imaging at clinical fields of 3 T confirmed the dark contrast effect of PAA-coated Ni nanowires, as compared to a water control, which opens a new window of opportunities for anisotropic metal nanostructures as contrast agents in MRI applications., MB-L and CR-A are grateful to the ERDF (European Regional Development Fund) under grant NORTE-45-2015-02. JG acknowledges the financial support from the Marie Curie COFUND Programme (NanoTRAINforGrowth) under grant no. 600375. Research at ICMM/CSIC has been supported by the Spanish Ministry of Science and Innovation under project MAT2013-48054-C2-1-R, and by the Regional Government of Madrid under Project S2013/MIT2850 NANOFRONTMAG-CM.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic hardening and domain structure in Co/Pt antidots with perpendicular anisotropy

  • Bran, Cristina
  • Gawronski, P.
  • Lucas, Irene
  • Pérez del Real, Rafael
  • Strichovanec, P.
  • Asenjo Barahona, Agustina
  • Vázquez Villalabeitia, Manuel
  • Chubykalo-Fesenko, O.
(Co(0.4 nm)/Pt(0.7 nm)) (x = 10, 20, 30) multilayer antidot thin films (films with arrays of nanoholes) have been grown by dc sputtering onto self-assembled pores of anodic alumina membranes with a tailored diameter and a fixed inter-hole distance. The magnetic behavior has been quantified by vibrating sample magnetometry, and the surface magnetization patterns have been imaged by magnetic force microscopy. The magnetization reversal mechanism is characterized by two steps depending on the film thickness and antidot diameter. These steps are ascribed to the nucleation and demagnetization of magnetic stripe domains. Their presence confirms the perpendicular anisotropy of the multilayer antidot films. The coercivity of antidot thin film is larger than that of the continuous films due to additional pinning centers provided by antidots. The width of the stripe domains increases as a function of film thickness. The demagnetization is further investigated through micromagnetic simulations that are in agreement with the measured hysteresis loops and their features. Different reversal mechanisms and an increase of the domain width in antidot thin films are also confirmed as a function of the magnetic anisotropy, antidot diameter and thickness of the thin film. The presence of antidots with a designed geometry is revealed to be successful in tailoring the coercivity of the thin films and magnetic patterns, which is relevant for advances in nanoscale technologies., The work has been supported by the Spanish Ministry of Science and Innovation under projects MAT2013-48054-C2-1-R and MAT2013-47078-C2-2-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Co/Au multisegmented nanowires: A 3D array of magnetostatically coupled nanopillars

  • Bran, Cristina
  • Ivanov, Yu P.
  • Kosel, J.
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
Arrays of multisegmented Co/Au nanowires with designed segment lengths and diameters have been prepared by electrodeposition into aluminum oxide templates. The high quality of the Co/Au interface and the crystallographic structure of Co segments have determined by high-resolution transmission electron microscopy. Magnetic hysteresis loop measurements show larger coercivity and squareness of multisegmented nanowires as compared to single segment Co nanowires. The complementary micromagnetic simulations are in good agreement with the experimental results, confirming that the magnetic behavior is defined mainly by magnetostatic coupling between different segments. The proposed structure constitutes an innovative route towards a 3D array of synchronized magnetic nano-oscillators with large potential in nanoelectronics., This work was supported by Ministerio de Economia y Competitividad (MINECO) (MAT2013-48054-C2-1-R and MAT2013-47078C2-2-P).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Doubling of the magnetic energy product in ferromagnetic nanowires at ambient temperature by capping their tips with an antiferromagnet

  • Wang, F. Z.
  • Salikhov, R.
  • Spasova, M.
  • Liébana-Viñas, S.
  • Bran, Cristina
  • Chen, Y. S.
  • Vázquez Villalabeitia, Manuel
  • Farle, M.
  • Wiedwald, U.
We present an approach to prepare free-standing tips of micrometer-long nanowires electrodeposited in anodic aluminum oxide nanopores. Such open tips can be further processed, e.g. for vertical interconnects of functional layers or for tailoring the magnetization reversal of ferromagnetic nanowires. The magnetic switching of nanowires is usually initiated by vortex or domain formation at the nanowire tips. We show that coating the tips of FeCo nanowires (diameter 40 nm, length 16 μm) with thin antiferromagnetic FeMn capping layers (thickness ≈10 nm) leads to magnetic hardening with a more than doubled energy product at ambient temperature., RS acknowledges funding by the Deutsche Forschungsgemeinschaft (DFG) under Grant No. SA 3095/2-1. This work has been partly supported by the Spanish Ministry of Economy and Competitiveness under project MAT2013-48054-C2-1-R and MAT2016-76824-C3-1-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct observation of transverse and vortex metastable magnetic domains in cylindrical nanowires

  • Bran, Cristina
  • Fernández-Roldán, José A.
  • Palmero, Ester M.
  • Berganza, Eider
  • Guzmán, J.
  • Pérez del Real, Rafael
  • Asenjo Barahona, Agustina
  • Fraile Rodríguez, A.
  • Foerster, Michael
  • Aballe, Lucía
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
We present experimental evidence of transverse magnetic domains, previously observed only in nanostrips, in CoNi cylindrical nanowires with designed crystal symmetry and tailored magnetic anisotropy. The transverse domains are found together with more conventional vortex domains along the same cylindrical nanowire, denoting a bistable system with similar energies. The surface and the inner magnetization distribution in both types of domains are analyzed by photoemission electron microscopy with x-ray magnetic circular dichroism contrast, and hysteresis loop in individual nanowires are measured by magneto-optical Kerr effect. These experimental data are understood and compared with complementary micromagnetic simulations., The study has been performed under the framework of the Projects No. MAT2013-48054-C2-1-R, MAT2016-76824-C3-1-R, MAT-2015-68772-P, MAT2015-64110-C2-2-P supported by the MINECO from Spain and DURSI 2014SGR220 supported by the Catalan Government. J.A.F.-R. acknowledges financial support from MINECO and the ESF through the “Ayudas para contratos predoctorales para la formación de doctores 2014.”
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Micromagnetism of cylindrical nanowires with compositional and geometric modulations

  • Fernández-Roldán, José A.
[EN] TThis thesis focuses on micromagnetic and analytical modelling of the magnetization processes in individual cylindrical nanowires with different geometries (modulations in diameter) and compositions. The objective is the design of nanowires to control the type of magnetic domains and domain walls as well as their pinning mechanisms which may serve as a basis for nanotechnological applications of these objects. The first part is dedicated to remanent states, hysteresis processes and pinning properties of Co-based and Permalloy nanowires with antinotches and diameter modulations. On the other hand, magnetic domains are studied in nanowires of CoxNi100-x, and we present the numerical modelling of signals of Transmision X-Ray Microscopy with X-Ray Magnetic Circular Dichroism for different magnetization configurations to interpret the magnetic state in nanowires of CoNi/Ni. We additionally evaluate the heat dissipation of Permalloy and Co nanowires under an alternating magnetic field and interpret it by a simple analytical model of the domain wall motion. The results of this thesis constitute a basis for nanowires design for different nanotechnological applications such as 3D magnetic memories, sensors, permanent magnets, bio-magnetic applications (magnetic hyperthermia) or water purification treatment., [ES] Esta tesis se centra en la modelizado micromagnético y analítico de procesos de imanación en nanohilos cilíndricos individuales con diferentes geometrías (modulaciones en diámetro) y composiciones (nanohilos multisegmentados). El propósito del estudio es el diseño de nanohilos con el objetivo de controlar el tipo de dominios magnéticos y paredes de dominio, así como sus mecanismos de enganche (pinning) que pueden servir de base para multitud de aplicaciones nanotecnológicas de estos objetos. La primera parte de la tesis se dedica al estudio de la modulación geométrica en diámetro de nanohilos magnéticos. En particular, se ha llevado a cabo el modelizado magnético de estados de remanencia, procesos de histéresis y propiedades de enganche en nanohilos basados en cobalto con antinotches y modulaciones en diámetro. Se han escogido Co y aleaciones basadas en este elemento debido a su alta imanación de saturación y su alta anisotropía magnetocristalina. En el caso de antinotches se han investigados dos situaciones: aquella en la que los antinotches producen enganche de paredes de dominio de vórtice, y otra en las que la estructura de dominios de vórtice es independiente de su presencia. Los resultados están de acuerdo con las imágenes de Microscopía de Fuerza Magnética (MFM) y Dicroismo Circular Magnético de rayos X (DCMX). En nanohilos modulados periódicamente en diámetro, hemos encontrado las condiciones desenganche fuerte y débil de la pared de dominio en las constricciones. Hemos probado que estos nanohilos se desimanan por propagación de un tubo, bien de vórtice, o bien de skyrmion, donde la protección topológica juega un papel relevante en los procesos de enganche. Hemos introducido un nuevo mecanismo de enganche que llamamos “enganche sacacorchos” (corkscrew pinning) cuando el núcleo del skyrmion describe una rotación helicoidal en torno al eje del hilo en el segmento de mayor diámetro, y precisa penetrar en el segmento de menor diámetro. Así mismo, en esta parte de la tesis también introducimos un modelo analítico simple del enganche de una pared de dominio en un nanohilo bisegmentado de Permalloy., Del modelo se deriva una ley de escala para el campo de desenganche (depinning field) de una pared de tipo transversal que es comparada con simulaciones micromagnéticas. Igualmente, se ha introducido el efecto de ratchet de imanación (propagación unidireccional de la desimanación) en nanohilos multicapa de FeCo/Cu con segmentos de FeCo de longitud creciente. Este efecto es importante para aplicaciones que precisen el control de portadores de información magnéticos como las memorias 3D y registros de desplazamiento (shift registers). Los resultados micromagnéticos prevén esclarecer el proceso de imanación complejo observado en medidas de DCMX. Por otro lado, se estudian los procesos de histéresis y dominios magnéticos en nanohilos cilíndricos de aleaciones de CoxNi100-x para diferentes contenidos de cobalto x a fin de observar la competición entre las anisotropías magnetocristalina y de forma, que da lugar a diferentes configuraciones magnéticas. Se modelizan estados magnéticos “vírgenes” (As-prepared states) y se comparan con observaciones de DCMX y MFM. Observamos y demostramos por primera vez la presencia de dominios transversales en coexistencia con dominios de vórtice para contenidos de cobalto intermedios. Además del modelizado micromagnético, se presenta la modelización numérica de señales de Microscopía de rayos X de transmisión con DCMX para diferentes configuraciones de imanación como una herramienta para interpretar el estado magnético en segmentos de nanohilos cilíndricos de CoNi, y se discute con resultados experimentales preliminares. Aquí se emplea un ansatz de vórtice, y por comparación de las imágenes simuladas con la experimental, se demuestra que la señal de DCMX observada corresponde a un estado magnético de vórtice a lo largo del segmento de CoNi., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multisegmented nanowires: a step towards the control of the domain wall configuration

  • Berganza, Eider
  • Jaafar, Miriam
  • Bran, Cristina
  • Fernández-Roldán, José A.
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
  • Asenjo Barahona, Agustina
Cylindrical nanowires synthesized by controlled electrodeposition constitute excellent strategic candidates to engineer magnetic domain configurations. In this work, multisegmented CoNi/Ni nanowires are synthesized for tailoring a periodic magnetic structure determined by the balance between magnetocrystalline and magnetostatic energies. High-resolution Transmission Electron Microscopy confirms the segmented growth and the sharp transition between layers. Although both CoNi and Ni segments have similar fcc cubic crystal symmetry, their magnetic configuration is quite different as experimentally revealed by Magnetic Force Microscopy (MFM) imaging. While the Ni segments are single domain with axial magnetization direction, the CoNi segments present two main configurations: A single vortex state or a complex multivortex magnetic configuration, which is further interpreted with the help of micromagnetic simulations. This original outcome is ascribed to the tight competition between anisotropies. The almost monocrystalline fcc structure of the CoNi segments, as revealed by the electron diffraction patterns, which is atypical for its composition, contributes to balance the magnetocrystalline and shape anisotropies. The results of MFM measurements performed under in-plane magnetic field demonstrate that it is possible to switch from the multivortex configuration to a single vortex configuration with low magnetic fields., We acknowledge the support from the Spanish Ministerio de Economia y Competitividad (MINECO) under projects no. MAT2013-48054-C2-1-R, Consolider CSD2010-00024, MAT2015-73775-JIN and MAT2016-76824-C3-1-R. J.A. acknowledges the support from MINECO and the ESF though ‘Ayudas para contratos predoctorales para la formación de doctores 2014’.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling magnetic-field-induced domain wall propagation in modulated-diameter cylindrical nanowires

  • Fernández-Roldán, José A.
  • De Riz, A.
  • Trapp, B.
  • Thirion, C.
  • Vázquez Villalabeitia, Manuel
  • Toussaint, J.-C.
  • Fruchart, Olivier
  • Gusakova, D.
[EN] Domain wall propagation in modulated-diameter cylindrical nanowires is a key phenomenon to be studied with a view to designing three-dimensional magnetic memory devices. This paper presents a theoretical study of transverse domain wall behavior under the influence of a magnetic field within a cylindrical nanowire with diameter modulations. In particular, domain wall pinning close to the diameter modulation was quantified, both numerically, using finite element micromagnetic simulations, and analytically. Qualitative analytical model for gently sloping modulations resulted in a simple scaling law which may be useful to guide nanowire design when analyzing experiments. It shows that the domain wall depinning field value is proportional to the modulation slope., We acknowledge financial support from the French National Research Agency (ANR) (Grant No. JCJC MATEMAC-3D) and from the European Union’s Seventh Framework Programme (FP7/2007–2013) under grant agreement No. 309589 (M3d). J. A. F.-R. is grateful for financial support from the Spanish MINECO under MAT2016-76824-C3-1-R and co-support from the ESF though BES-2014-068789 and EEBB-I-16-10934.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stepwise magnetization reversal of geometrically tuned in diameter Ni and FeCo bi-segmented nanowire arrays

  • Palmero, Ester M.
  • Méndez, Miguel
  • González, Silvia
  • Bran, Cristina
  • Vega, Víctor
  • Vázquez Sulleiro, Manuel
  • Prida, V. M.
Magnetization reversal processes of hexagonal dense arrays of bi-segmented Ni and Fe50Co50 nanowires consisting of two well defined diameters (45 and 80 nm) have been studied. The nanowires were grown inside of tailored pores of anodic alumina templates by combined anodization, atomic layer deposition (ALD) and electrodeposition techniques. The experiments have allowed to identify their two-step magnetization reversal process ascribed to the respective segments of different diameter. This is concluded from the differential susceptibility observed in the hysteresis loops, contrary to those for nanowires with homogeneous diameter. These results are also confirmed by the first-order reversal curve (FORC) distribution diagrams, where an elongation parallel to the interaction axis around two coercive field values is obtained, which is correlated to the difference in diameter of the two segments. This well-defined two-step magnetization reversal process through the nanowire diameter design is thought to be very useful for the advanced control of the remagnetization in arrays of magnetic multidomain systems., The authors acknowledge financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) through the research Projects MAT2013-48054-C2-1-R, MAT2013-48054-C2-2-R, MAT2016-76824-C3-1-R and MAT2016-76824-C3-3-R. The scientific support from the SCTs of the University of Oviedo is also acknowledged., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin configuration in isolated FeCoCu nanowires modulated in diameter

  • Iglesias-Freire, Ó.
  • Bran, C.
  • Berganza, E.
  • Mínguez-Bacho, I.
  • Magén, C.
  • Vázquez, M.
  • Asenjo, A.
Cylindrical Fe28Co67Cu5 nanowires modulated in diameter between 22 and 35 nm are synthesized by electroplating into the nanopores of alumina membranes. High-sensitivity MFM imaging (with a detection noise of 1 µN m-1) reveals the presence of single-domain structures in remanence with strong contrast at the ends of the nanowires, as well as at the transition regions where the diameter is modulated. Micromagnetic simulations suggest that curling of the magnetization takes place at these transition sites, extending over 10–20 nm and giving rise to stray fields measurable with our MFM. An additional weaker contrast is imaged, which is interpreted to arise from inhomogeneities in the nanowire diameter.