Pasar al contenido principal

-

CSD2010-00024

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE MURCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2010-00024

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2010-00024

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD AUTONOMA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2010-00024

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2010-00024

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2010-00024

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin configuration in isolated FeCoCu nanowires modulated in diameter

  • Iglesias-Freire, Ó.
  • Bran, C.
  • Berganza, E.
  • Mínguez-Bacho, I.
  • Magén, C.
  • Vázquez, M.
  • Asenjo, A.
Cylindrical Fe28Co67Cu5 nanowires modulated in diameter between 22 and 35 nm are synthesized by electroplating into the nanopores of alumina membranes. High-sensitivity MFM imaging (with a detection noise of 1 µN m-1) reveals the presence of single-domain structures in remanence with strong contrast at the ends of the nanowires, as well as at the transition regions where the diameter is modulated. Micromagnetic simulations suggest that curling of the magnetization takes place at these transition sites, extending over 10–20 nm and giving rise to stray fields measurable with our MFM. An additional weaker contrast is imaged, which is interpreted to arise from inhomogeneities in the nanowire diameter.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Towards a metallic top contact electrode in molecular electronic devices exhibiting a large surface coverage by photoreduction of silver cations

  • Martin, Santiago
  • Ballesteros, Luz M.
  • Gonzalez-Orive, A.
  • Oliva, H.
  • Marques-Gonzalez, Santiago
  • Lorenzoni, Matteo
  • Nichols, Richard J.
  • Perez-Murano, Francesc
  • Low, Paul J.
  • Cea, Pilar
In this contribution the photoreduction of silver ions coordinated onto a Langmuir–Blodgett monolayer is presented as an effective method for the deposition of the top contact electrode in metal/monolayer/metal devices. Silver cations were incorporated from an aqueous AgNO3 sub-phase of Langmuir films of 4,4'-(1,4-phenylenebis(ethyne-2,1-diyl))dibenzoic acid upon the transference of these films onto a metallic substrate. Subsequent irradiation of the silver-ion functionalized Langmuir–Blodgett films with 254 nm light results in the photoreduction of silver cations to produce metallic silver nanoparticles, which are distributed over the organic monolayer and exhibit a surface coverage as large as 76% of the monolayer surface. Electrical properties of these metal/monolayer/metal devices were determined by recording I–V curves, which show a sigmoidal behaviour indicative of well-behaved junctions free of metallic filaments and short-circuits. The integrity of the organic monolayer upon the irradiation process and formation of the silver top-contact electrode has also been demonstrated through cyclic voltammetry experiments.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Functional dependence of resonant harmonics on nanomechanical parameters in dynamic mode atomic force microscopy

  • Gramazio, Federico
  • Lorenzoni, Matteo|||0000-0001-5287-8761
  • Pérez-Murano, Francesc
  • Rull Trinidad, Enrique
  • Staufer, Urs
  • Fraxedas, Jordi|||0000-0002-2821-4831
We present a combined theoretical and experimental study of the dependence of resonant higher harmonics of rectangular cantilevers of an atomic force microscope (AFM) as a function of relevant parameters such as the cantilever force constant, tip radius and free oscillation amplitude as well as the stiffness of the sample's surface. The simulations reveal a universal functional dependence of the amplitude of the 6th harmonic (in resonance with the 2nd flexural mode) on these parameters, which can be expressed in terms of a gun-shaped function. This analytical expression can be regarded as a practical tool for extracting qualitative information from AFM measurements and it can be extended to any resonant harmonics. The experiments confirm the predicted dependence in the explored 3-45 N/m force constant range and 2-345 GPa sample's stiffness range. For force constants around 25 N/m, the amplitude of the 6th harmonic exhibits the largest sensitivity for ultrasharp tips (tip radius below 10 nm) and polymers (Young's modulus below 20 GPa).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magnetic vortex evolution in self-assembled La₀.₇Sr₀.₃MnO₃ nanoislands under in-plane magnetic field

  • Zabaleta Llorens, Jone
  • Jaafar, Míriam|||0000-0002-9086-6187
  • Asenjo, Agustina|||0000-0001-6524-9702
  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
The magnetic vortex formation at room temperature and its evolution under in-plane magnetic field is studied in chemically grown self-assembled La₀.₇Sr₀.₃MnO₃ nanoislands of less than 200 nm in width. We use variable field magnetic force microscopy and numerical simulations to confirm that the vortex state is ubiquitous in these square-base pyramid shape epitaxial LaSrMnO nanostructures, and that it requires in-plane magnetic fields below 40 kA/m to be annihilated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Atomic species identification at the (101) anatase surface by simultaneous scanning tunnelling and atomic force microscopy

  • Stetsovych, Oleksandr
  • Todorovi, Milica
  • Shimizu, Tomoko K.
  • Moreno, Cesar|||0000-0003-2682-211X
  • Ryan, James William
  • Pérez León, Carmen
  • Sagisaka, Keisuke
  • Palomares, Emilio
  • Matolín, Vladimír
  • Fujita, Daisuke
  • Perez, Ruben
  • Custance, Oscar
Anatase is a pivotal material in devices for energy-harvesting applications and catalysis. Methods for the accurate characterization of this reducible oxide at the atomic scale are critical in the exploration of outstanding properties for technological developments. Here we combine atomic force microscopy (AFM) and scanning tunnelling microscopy (STM), supported by first-principles calculations, for the simultaneous imaging and unambiguous identification of atomic species at the (101) anatase surface. We demonstrate that dynamic AFM-STM operation allows atomic resolution imaging within the materiala € s band gap. Based on key distinguishing features extracted from calculations and experiments, we identify candidates for the most common surface defects. Our results pave the way for the understanding of surface processes, like adsorption of metal dopants and photoactive molecules, that are fundamental for the catalytic and photovoltaic applications of anatase, and demonstrate the potential of dynamic AFM-STM for the characterization of wide band gap materials.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Evaluating the compressive stress generated during fabrication of Si doubly clamped nanobeams with AFM

  • Lorenzoni, Matteo|||0000-0001-5287-8761
  • Llobet Sixto, Jordi|||0000-0001-7007-9277
  • Gramazio, Federico
  • Sansa Perna, Marc
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Pérez Murano, Francesc|||0000-0002-4647-8558
In this work, the authors employed Peak Force tapping and force spectroscopy to evaluate the stress generated during the fabrication of doubly clamped, suspended silicon nanobeams with rectangular section. The silicon beams, released at the last step of fabrication, present a curved shape that suggests a bistable buckling behavior, typical for structures that retain a residual compressive stress. Both residual stress and Young's modulus were extracted from experimental data using two different methodologies: analysis of beam deflection profiles and tip-induced mechanical bending. The results from the two methods are compared, providing an insight into the possible limitations of both methods.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Pentacene/TiO2 Anatase Hybrid Interface Study by Scanning Probe Microscopy and First Principles Calculations

  • Todorović, Milica|||0000-0003-0028-0105
  • Stetsovych, Oleksandr
  • Moreno, Cesar|||0000-0003-2682-211X
  • Shimizu, Tomoko K.
  • Custance, Oscar
  • Pérez, Rubén
The understanding and control of the buried interface between functional materials in optoelectronic devices is key to improving device performance. We combined atomic resolution scanning probe microscopy with first-principles calculations to characterize the technologically relevant organic/inorganic interface structure between pentacene molecules and the TiO anatase (101) surface. A multipass atomic force microscopy imaging technique overcomes the technical challenge of imaging simultaneously the corrugated anatase substrate, molecular adsorbates, monolayers, and bilayers at the same level of detail. Submolecular resolution images revealed the orientation of the adsorbates with respect to the substrate and allowed direct insights into interface formation. Pentacene molecules were found to physisorb parallel to the anatase substrate in the first contact layer, passivating the surface and promoting bulk-like growth in further organic layers. While molecular electronic states were not significantly hybridized by the substrate, simulations predicted localized pathways for molecule-surface charge injection. The localized states were associated with the molecular lowest unoccupied molecular orbital inside the oxide conduction band, pointing to efficient transfer of photo-induced electron charge carriers across this interface in prospective photovoltaic devices. In uncovering the atomic arrangement and favorable electronic properties of the pentacene/anatase interface, our findings testify to the maturity and analytic power of our methodology in further studies of organic/inorganic interfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enabling electromechanical transduction in silicon nanowire mechanical resonators fabricated by focused ion beam implantation, Enabling electromechanical transduction in silicon nanowire mechanical resonators fabricated by FIB ion implantation

  • Llobet Sixto, Jordi|||0000-0001-7007-9277
  • Sansa Perna, Marc
  • Gerbolés, M.
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Pérez Murano, Francesc|||0000-0002-4647-8558
We present the fabrication of silicon nanowire (SiNW) mechanical resonators by a resistless process based on focused ion beam local gallium implantation, selective silicon etching and diffusive boron doping. Suspended, doubly clamped SiNWs fabricated by this process presents a good electrical conductivity which enables the electrical read-out of the SiNW oscillation. During the fabrication process, gallium implantation induces the amorphization of silicon that, together with the incorporation of gallium into the irradiated volume, increases the electrical resistivity to values higher than 3 Ω m, resulting in an unacceptably high resistance for electrical transduction. We show that the conductivity of the SiNWs can be restored by performing a high temperature doping process, which allows us to recover the crystalline structure of the silicon and to achieve a controlled resistivity of the structures. Raman spectroscopy and TEM microscopy are used to characterize the recovery of crystallinity, while electrical measurements show a resistivity of 10 Ω m. This resistivity allows to obtain excellent electromechanical transduction, which is employed to characterize the high frequency mechanical response by electrical methods.