Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Stabilizing Edge Fluorination in Graphene Nanoribbons

  • Panighel, Mirco
  • Quiroga Fernández, Sabela
  • Brandimarte, Pedro
  • Moreno, Cesar
  • García Lekue, Aran
  • Vilas Varela, Manuel
  • Rey Vieites, Dulce María
  • Sauthier, Guillaume
  • Ceballos, Gustavo
  • Peña Gil, Diego
  • Mugarza, Aitor
The on-surface synthesis of edge-functionalized graphene nanoribbons (GNRs) is challenged by the stability of the functional groups throughout the thermal reaction steps of the synthetic pathway. Edge fluorination is a particularly critical case in which the interaction with the catalytic substrate and intermediate products can induce the complete cleavage of the otherwise strong C–F bonds before the formation of the GNR. Here, we demonstrate how a rational design of the precursor can stabilize the functional group, enabling the synthesis of edge-fluorinated GNRs. The survival of the functionalization is demonstrated by tracking the structural and chemical transformations occurring at each reaction step with complementary X-ray photoelectron spectroscopy and scanning tunneling microscopy measurements. In contrast to previous attempts, we find that the C–F bond survives the cyclodehydrogenation of the intermediate polymers, leaving a thermal window where GNRs withhold more than 80% of the fluorine atoms. We attribute this enhanced stability of the C–F bond to the particular structure of our precursor, which prevents the cleavage of the C–F bond by avoiding interaction with the residual hydrogen originated in the cyclodehydrogenation. This structural protection of the linking bond could be implemented in the synthesis of other sp2-functionalized GNRs
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bottom-up synthesis of multifunctional nanoporous graphene

  • Moreno, César
  • Vilas-Varela, Manuel
  • Kretz, Bernhard
  • Garcia-Lekue, Aran
  • Costache, Marius V.
  • Paradinas, Markos
  • Panighel, Mirko
  • Ceballos, Gustavo
  • Valenzuela, Sergio O.
  • Peña, Diego
  • Mugarza, Aitor
Nanosize pores can turn semimetallic graphene into a semiconductor and, from being impermeable, into the most efficient molecular-sieve membrane. However, scaling the pores down to the nanometer, while fulfilling the tight structural constraints imposed by applications, represents an enormous challenge for present top-down strategies. Here we report a bottom-up method to synthesize nanoporous graphene comprising an ordered array of pores separated by ribbons, which can be tuned down to the 1-nanometer range. The size, density, morphology, and chemical composition of the pores are defined with atomic precision by the design of the molecular precursors. Our electronic characterization further reveals a highly anisotropic electronic structure, where orthogonal one-dimensional electronic bands with an energy gap of ∼1 electron volt coexist with confined pore states, making the nanoporous graphene a highly versatile semiconductor for simultaneous sieving and electrical sensing of molecular species., This research was funded by the Centres de Recerca de Catalunya Programme–Generalitat de Catalunya, the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016–2019, ED431G/09), and the European Regional Development Fund. This research was supported by the Spanish Ministry of Economy and Competitiveness (under contract no. MAT2016-78293-C6-2-R, MAT2016-78293-C6-3-R, MAT2016-78293-C6-4-R, and MAT2016-75952-R and Severo Ochoa no. SEV-2013-0295); the Secretariat for Universities and Research, Knowledge Department of the Generalitat de Catalunya 2014 SGR 715, 2014 SGR 56, and 2017 SGR 827; the Basque Department of Education (contract no. PI-2016-1-0027); and the European Union’s Horizon 2020 research and innovation program under grant agreement 696656. C.M. was supported by the Agency for Management of University and Research grants (AGAUR) of the Catalan government through the FP7 framework program of the European Commission under Marie Curie COFUND action 600385., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-surface synthesis of superlattice arrays of ultra-long graphene nanoribbons

  • Moreno, César
  • Paradinas, Markos
  • Vilas-Varela, Manuel
  • Panighel, Mirko
  • Ceballos, Gustavo
  • Peña, Diego
  • Mugarza, Aitor
We report the on-surface synthesis of graphene nanoribbon superlattice arrays directed by the herringbone reconstruction of the Au(111) surface. The uniaxial anisotropy of the zigzag pattern of the reconstruction defines a one dimensional grid for directing the Ullmann polymerization and inducing periodic arrays of parallel ultra-long nanoribbons (>100 nm), where the periodicity is varied with coverage at discrete values following a hierarchical templating behavior., C. M. was supported by AGAUR through the FP7-EU under Marie Curie COFUND action 600385. M. P. acknowledges the Spanish Government for financial support through PTA2014-09788-I. Funded by the CERCA Programme/Generalitat de Catalunya. We acknowledge support from the Ministerio de Ciencia e Innovación (MAT2013-46593-C6-2-P, MAT2013-46593-C6-5-P, MAT2016-78293-C6-2-R, MAT2016-78293-C6-4-R and Severo Ochoa No. SEV-2013-0295), the EU project PAMS (610446) the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016–2019, ED431G/09), and the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pentacene/TiO2 anatase hybrid interface study by scanning probe microscopy and first principles calculations

  • Todorović, Milica
  • Stetsovych, Oleksandr
  • Moreno, César
  • Shimizu, Tomoko K.
  • Custance, Oscar
  • Pérez, Rubén
The understanding and control of the buried interface between functional materials in optoelectronic devices is key to improving device performance. We combined atomic resolution scanning probe microscopy with first-principles calculations to characterize the technologically relevant organic/inorganic interface structure between pentacene molecules and the TiO2 anatase (101) surface. A multipass atomic force microscopy imaging technique overcomes the technical challenge of imaging simultaneously the corrugated anatase substrate, molecular adsorbates, monolayers, and bilayers at the same level of detail. Submolecular resolution images revealed the orientation of the adsorbates with respect to the substrate and allowed direct insights into interface formation. Pentacene molecules were found to physisorb parallel to the anatase substrate in the first contact layer, passivating the surface and promoting bulk-like growth in further organic layers. While molecular electronic states were not significantly hybridized by the substrate, simulations predicted localized pathways for molecule–surface charge injection. The localized states were associated with the molecular lowest unoccupied molecular orbital inside the oxide conduction band, pointing to efficient transfer of photo-induced electron charge carriers across this interface in prospective photovoltaic devices. In uncovering the atomic arrangement and favorable electronic properties of the pentacene/anatase interface, our findings testify to the maturity and analytic power of our methodology in further studies of organic/inorganic interfaces., Work was supported by the NIMS (PF201 and PF303 projects), by the JST PRESTO grant number JPMJPR1418, JSPS KAKENHI grant number 16K05674, and by the Spanish MINECO (projects CSD2010-00024, MAT2014-54484-P, and MAT2017-83273-R). C.M. was supported by the Japanese Ministry for Education, Science and Technology through International Center for Young Scientist (ICYS) program and by the Agency for Management of University and Research grants (AGAUR) of the Catalan government through the FP7 framework program of the European Commission under Marie Curie COFUND action 600385., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zigzag ligands for transversal design in reticular chemistry: Unveiling new structural opportunities for metal−organic frameworks

  • Guillerm, Vincent
  • Grancha, Thais
  • Imaz, Inhar
  • Juanhuix, Jordi
  • Maspoch, Daniel
Herein we describe the topological influence of zigzag ligands in the assembly of Zr(IV) metal–organic frameworks (MOFs). Through a transversal design strategy using reticular chemistry, we were able to synthesize a family of isoreticular Zr(IV)-based MOFs exhibiting the bcu—rather than the fcu—topology. Our findings underscore the value of the transversal parameter in organic ligands for dictating MOF architectures., This work was supported by the EU FP7 ERC-Co 615954, the Spanish MINECO (project PN MAT2015-65354-C2-1-R), and the Catalan AGAUR (project 2014 SGR 80). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 acknowledges the support of MINECO through the Severo Ochoa Centers of Excellence Program, under Grant SEV-2013-0295. V.G. is grateful to the Generalitat de Catalunya for a Beatriu de Pinos fellowship (2014 BP-B 00155) (Marie Curie Fellowship, EU-funded project ITHACA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Critical role of phenyl substitution and catalytic substrate on the surface-assisted polymerization of dibromobianthracene derivatives

  • Moreno, César
  • Panighel, Mirko
  • Vilas-Varela, Manuel
  • Sauthier, Guillaume
  • Tenorio, Maria
  • Ceballos, Gustavo
  • Peña, Diego
  • Mugarza, Aitor
Understanding the nature and hierarchy of on-surface reactions is a major challenge for designing coordination and covalent nanostructures by means of multistep synthetic routes. In particular, intermediates and final products are hard to predict since the reaction paths and their activation windows depend on the choice of both the molecular precursor design and the substrate. Here, we report a systematic study of the effect of the catalytic metal surface to reveal how a single precursor can give rise to very distinct polymers that range from coordination and covalent nonplanar polymer chains of distinct chirality to atomically precise graphene nanoribbons and nanoporous graphene. Our precursor consists on adding two phenyl substituents to 10,10′-dibromo-9,9′-bianthracene, a well-studied precursor in the on-surface synthesis of graphene nanoribbons. The critical role of the monomer design in the reaction paths is inferred from the fact that the phenyl substitution leads to very distinct products in each one of the studied metallic substrates., C.M. was supported by the Agency for Management of University and Research grants (AGAUR) of the Catalan government through the FP7 framework program of the European Commission under Marie Curie COFUND action 600385. Funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). We acknowledge support from the Ministerio de Ciencia e Innovación (MAT2013-46593-C6-2-P, MAT2013-46593-C6-5-P, MAT2016-78293-C6-2-R, MAT2016-78293-C6-4-R), the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI), the EU project PAMS (610446) the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016–2019, ED431G/09), and the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Neutral organic radical formation by chemisorption on metal surfaces

  • Ajayakumar, Murugan
  • Moreno, César
  • Alcón, Isaac
  • Illas, Francesc
  • Rovira, Concepció
  • Veciana, Jaume
  • Bromley, Stefan T.
  • Mugarza, Aitor
  • Mas Torrent, Marta
Organic radical monolayers (r-MLs) bonded to metal surfaces are potential materials for the development of molecular (spin)electronics. Typically, stable radicals bearing surface anchoring groups are used to generate r-MLs. Following a recent theoretical proposal based on a model system, we report the first experimental realization of a metal surface-induced r-ML, where a rationally chosen closed-shell precursor 3,5-dichloro-4-[bis(2,4,6-trichlorophenyl)methylen]cyclohexa-2,5-dien-1-one (1) transforms into a stable neutral open-shell species (1•) via chemisorption on the Ag(111) surface. X-ray photoelectron spectroscopy reveals that the >C═O group of 1 reacts with the surface, forming a C–O–Ag linkage that induces an electronic rearrangement that transforms 1 to 1•. We further show that surface reactivity is an important factor in this process whereby Au(111) is inert towards 1, whereas the Cu(111) surface leads to dehalogenation reactions. The radical nature of the Ag(111)-bound monolayer was further confirmed by angle-resolved photoelectron spectroscopy and electronic structure calculations, which provide evidence of the emergence of the singly occupied molecular orbital (SOMO) of 1•., This work was funded by ERC StG 2012-306826 e-GAMES, the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (contract no. EFA 194/16 TNSI), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBERBBN), the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER) through projects FANCY CTQ2016-80030-R, RTI2018-095460-B-I00 and MAT2016-78293-C6-2-R, the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496 and SEV-2017-0706), and the “Maria de Maeztu” program for Spanish Structures of Excellence (MDM-2017-0767). This research was also supported in part by Generalitat de Catalunya (grants 2017SGR13 and 2017SGR918). Computational time was provided by through grants from the Red Española de Supercomputacion. I.A. acknowledges the Spanish Ministerio de Educacion Cultura y Deporte for an FPU Ph.D. scholarship, and F.I. acknowledges additional support from a 2015 ICREA Academia Award. This research was also funded by the CERCA Programme/Generalitat de Catalunya. C.M. was supported by the Agency for Management of University and Research grants (AGAUR) of the Catalan government through the FP7 framework program of the European Commission under Marie Curie COFUND action 600385., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stabilizing edge fluorination in graphene nanoribbons

  • Panighel, Mirko
  • Quiroga, Sabela
  • Brandimarte, Pedro
  • Moreno, César
  • Garcia-Lekue, Aran
  • Vilas-Varela, Manuel
  • Rey, Dulce
  • Sauthier, Guillaume
  • Ceballos, Gustavo
  • Peña, Diego
  • Mugarza, Aitor
The on-surface synthesis of edge-functionalized graphene nanoribbons (GNRs) is challenged by the stability of the functional groups throughout the thermal reaction steps of the synthetic pathway. Edge fluorination is a particularly critical case in which the interaction with the catalytic substrate and intermediate products can induce the complete cleavage of the otherwise strong C–F bonds before the formation of the GNR. Here, we demonstrate how a rational design of the precursor can stabilize the functional group, enabling the synthesis of edge-fluorinated GNRs. The survival of the functionalization is demonstrated by tracking the structural and chemical transformations occurring at each reaction step with complementary X-ray photoelectron spectroscopy and scanning tunneling microscopy measurements. In contrast to previous attempts, we find that the C–F bond survives the cyclodehydrogenation of the intermediate polymers, leaving a thermal window where GNRs withhold more than 80% of the fluorine atoms. We attribute this enhanced stability of the C–F bond to the particular structure of our precursor, which prevents the cleavage of the C–F bond by avoiding interaction with the residual hydrogen originated in the cyclodehydrogenation. This structural protection of the linking bond could be implemented in the synthesis of other sp2-functionalized GNRs., C.M. was supported by the Agency for Management of University and Research grants (AGAUR) of the Catalan government through the FP7 framework program of the European Commission under Marie Curie COFUND action 600385 funded by the CERCA Program/Generalitat de Catalunya. We acknowledge support from the Spanish Ministry of Economy and Competitiveness, MINECO (under Contracts Nos. MAT2016-78293-C6 and FIS2017-83780-P and SEV-2017-0706), the Spanish Research Agency (AEI /10.13039/501100011033, under Contracts Nos. PID2019-107338RB, PCI2019-111890-2), the European Regional Development Fund (ERDF), the Interreg V-A España-Francia-Andorra program (Contract No. EFA 194/16 TNSI), the EU project SPRING (863098), the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2019-2022, ED431G 2019/03)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

ts-PWS (v1.0.2): software to compute time-scale phase-weighted stack

  • Ventosa, Sergio
  • Schimmel, Martin
Más información: The ts-PWS version 1.0 is available in Ventosa (2018), DOI:10.5281/zenodo.1154588., Más información: https://github.com/sergiventosa/ts-PWS, Contacto: Sergi Ventosa, sventosa@geo3bcn.csic.es Contacto: Martin Schimmel, mschimmel@geo3bcn.csic.es, Software to compute the time-scale phase-weighted stack (ts-PWS), including the two-stage stack and the unbiased phase coherence strategies (Ventosa et al., GJI 2017). The software packages of fast phase cross-correlation and ts-PWS stacking are basic building blocks in the design of efficient signal extraction methods from interstation correlations. Main features Fast: The time-frequency expansion used in the ts-PWS is implemented using frames of wavelets (Morlet and Mexican hat wavelets are available). The most demanding operation is conventionally reading the data. Better filtering: The two-stage stacking and the unbiased phase coherence help to reduce signal attenuation and to increase noise attenation. Simple setup: All parameters are automatically set, e.g., when w0, Q or number of cycles is changed the parameters describing the frame are adapted accordingly. Resampling techniques: The bootstrap and jackknife techniques can be applied to build a pull of stacked sequences for a subsequent error analysis. The ts-PWS version 1.0 is available in Ventosa (2018), DOI:10.5281/zenodo.1154588., Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la General- itat de Catalunya; 7th European Framework Program Marie Curie COFUND contract 600385 Beatriu de Pinos Fellowship; EU Framework Programme Horizon 2020 ES1401 TIDES COST Actions; Ministerio de Economía, industria y competitividad CGL2013-48601-C2-1-R MISTERIOS; Agence Nationale de la Recherche ANR-16-C33-0005 ANR MIMOSA, Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Bottom-up synthesis of multifunctional nanoporous graphene

  • Moreno, Cesar|||0000-0003-2682-211X
  • Vilas Varela, Manuel
  • Kretz, Bernhard
  • Garcia-Lekue, Aran|||0000-0001-5556-0898
  • Costache, Marius Vasile|||0000-0001-7432-6175
  • Paradinas, Markos|||0000-0003-1006-9506
  • Panighel, Mirco|||0000-0001-8413-5196
  • Ceballos, Gustavo|||0000-0002-6713-7963
  • Valenzuela, Sergio O.|||0000-0002-4632-8891
  • Peña, Diego|||0000-0003-3814-589X
  • Mugarza, Aitor|||0000-0002-2698-885X
Nanosize pores can turn semimetallic graphene into a semiconductor and, from being impermeable, into the most efficient molecular-sieve membrane. However, scaling the pores down to the nanometer, while fulfilling the tight structural constraints imposed by applications, represents an enormous challenge for present top-down strategies. Here we report a bottom-up method to synthesize nanoporous graphene comprising an ordered array of pores separated by ribbons, which can be tuned down to the 1-nanometer range. The size, density, morphology, and chemical composition of the pores are defined with atomic precision by the design of the molecular precursors. Our electronic characterization further reveals a highly anisotropic electronic structure, where orthogonal one-dimensional electronic bands with an energy gap of ∼1 electron volt coexist with confined pore states, making the nanoporous graphene a highly versatile semiconductor for simultaneous sieving and electrical sensing of molecular species.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Critical Role of Phenyl Substitution and Catalytic Substrate in the Surface-Assisted Polymerization of Dibromobianthracene Derivatives

  • Moreno, Cesar|||0000-0003-2682-211X
  • Panighel, Mirco|||0000-0001-8413-5196
  • Vilas Varela, Manuel
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Tenorio, María José|||0000-0002-0855-7968
  • Ceballos, Gustavo|||0000-0002-6713-7963
  • Peña, Diego|||0000-0003-3814-589X
  • Mugarza, Aitor|||0000-0002-2698-885X
Understanding the nature and hierarchy of on-surface reactions is a major challenge for designing coordination and covalent nanostructures by means of multistep synthetic routes. In particular, intermediates and final products are hard to predict since the reaction paths and their activation windows depend on the choice of both the molecular precursor design and the substrate. Here, we report a systematic study of the effect of the catalytic metal surface to reveal how a single precursor can give rise to very distinct polymers that range from coordination and covalent nonplanar polymer chains of distinct chirality to atomically precise graphene nanoribbons and nanoporous graphene. Our precursor consists on adding two phenyl substituents to 10,10'-dibromo-9,9'-bianthracene, a well-studied precursor in the on-surface synthesis of graphene nanoribbons. The critical role of the monomer design in the reaction paths is inferred from the fact that the phenyl substitution leads to very distinct products in each one of the studied metallic substrates.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Pentacene/TiO2 Anatase Hybrid Interface Study by Scanning Probe Microscopy and First Principles Calculations

  • Todorović, Milica|||0000-0003-0028-0105
  • Stetsovych, Oleksandr
  • Moreno, Cesar|||0000-0003-2682-211X
  • Shimizu, Tomoko K.
  • Custance, Oscar
  • Pérez, Rubén
The understanding and control of the buried interface between functional materials in optoelectronic devices is key to improving device performance. We combined atomic resolution scanning probe microscopy with first-principles calculations to characterize the technologically relevant organic/inorganic interface structure between pentacene molecules and the TiO anatase (101) surface. A multipass atomic force microscopy imaging technique overcomes the technical challenge of imaging simultaneously the corrugated anatase substrate, molecular adsorbates, monolayers, and bilayers at the same level of detail. Submolecular resolution images revealed the orientation of the adsorbates with respect to the substrate and allowed direct insights into interface formation. Pentacene molecules were found to physisorb parallel to the anatase substrate in the first contact layer, passivating the surface and promoting bulk-like growth in further organic layers. While molecular electronic states were not significantly hybridized by the substrate, simulations predicted localized pathways for molecule-surface charge injection. The localized states were associated with the molecular lowest unoccupied molecular orbital inside the oxide conduction band, pointing to efficient transfer of photo-induced electron charge carriers across this interface in prospective photovoltaic devices. In uncovering the atomic arrangement and favorable electronic properties of the pentacene/anatase interface, our findings testify to the maturity and analytic power of our methodology in further studies of organic/inorganic interfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On-surface synthesis of superlattice arrays of ultra-long graphene nanoribbons

  • Moreno, Cesar|||0000-0003-2682-211X
  • Paradinas, Markos|||0000-0003-1006-9506
  • Vilas Varela, Manuel
  • Panighel, Mirco|||0000-0001-8413-5196
  • Ceballos, Gustavo|||0000-0002-6713-7963
  • Peña, Diego|||0000-0003-3814-589X
  • Mugarza, Aitor|||0000-0002-2698-885X
We report the on-surface synthesis of graphene nanoribbon superlattice arrays directed by the herringbone reconstruction of the Au(111) surface. The uniaxial anisotropy of the zigzag pattern of the reconstruction defines a one dimensional grid for directing the Ullmann polymerization and inducing periodic arrays of parallel ultra-long nanoribbons (.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Symmetry forbidden morphologies and domain boundaries in nanoscale graphene islands

  • Parreiras, Sofia de Oliveira|||0000-0001-9009-1994
  • Gastaldo, Michele|||0000-0002-8900-8257
  • Moreno, Cesar|||0000-0003-2682-211X
  • Martins, M. D.
  • Garcia-Lekue, Aran|||0000-0001-5556-0898
  • Ceballos, Gustavo|||0000-0002-6713-7963
  • Paniago, R.
  • Mugarza, Aitor|||0000-0002-2698-885X
The synthesis of graphene nanoislands with tailored quantum properties requires an atomic control of the morphology and crystal structure. As one reduces their size down to the nanometer scale, domain boundary and edge energetics, as well as nucleation and growth mechanisms impose different stability and kinetic landscape from that at the microscale. This offers the possibility to synthesize structures that are exclusive to the nanoscale, but also calls for fundamental growth studies in order to control them. By employing high-resolution scanning tunneling microscopy we elucidate the atomic stacking configurations, domain boundaries, and edge structure of graphene nanoislands grown on Ni(1 1 1) by CVD and post-annealed at different temperatures. We find a non-conventional multistep mechanism that separates the thermal regimes for growth, edge reconstruction, and final stacking configuration, leading to nanoisland morphologies that are incompatible with their stacking symmetry. Whole islands shift their stacking configuration during cooling down, and others present continuous transitions at the edges. A statistical analysis of the domain structures obtained at different annealing temperatures reveals how polycrystalline, ill-defined structures heal into shape-selected islands of a single predominant stacking. The high crystallinity and the control on morphology and edge structure makes these graphene nanoislands ideal for their application in optoelectronics and spintronics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Neutral organic radical formation by chemisorption on metal surfaces

  • Ajayakumar, M. R.|||0000-0002-7041-7456
  • Moreno, Cesar|||0000-0003-2682-211X
  • Alcón, Isaac|||0000-0002-7569-2000
  • Illas, Francesc|||0000-0003-2104-6123
  • Rovira Angulo, Concepció|||0000-0002-2365-9479
  • Veciana i Miró, Jaume|||0000-0003-1023-9923
  • Bromley, Stefan|||0000-0002-7037-0475
  • Mugarza, Aitor|||0000-0002-2698-885X
  • Mas-Torrent, Marta|||0000-0002-1586-005X
Organic radical monolayers (r-MLs) bonded to metal surfaces are potential materials for the development of molecular (spin)electronics. Typically, stable radicals bearing surface anchoring groups are used to generate r-MLs. Following a recent theoretical proposal based on a model system, we report the first experimental realization of a metal surface-induced r-ML, where a rationally chosen closed-shell precursor 3,5-dichloro-4-[bis(2,4,6-trichlorophenyl)methylen]cyclohexa-2,5-dien-1-one (1) transforms into a stable neutral open-shell species () via chemisorption on the Ag(111) surface. X-ray photoelectron spectroscopy reveals that the.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stabilizing edge fluorination in graphene nanoribbons

  • Panighel, Mirco|||0000-0001-8413-5196
  • Peña, Diego|||0000-0003-3814-589X
  • Brandimarte Mendonça, Pedro|||0000-0002-8762-5876
  • Moreno, Cesar|||0000-0003-2682-211X
  • Garcia-Lekue, Aran|||0000-0001-5556-0898
  • Vilas-Varela, Manuel|||0000-0002-6768-5441
  • Rey, Dulce
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Ceballos, Gustavo|||0000-0002-6713-7963
  • Mugarza, Aitor|||0000-0002-2698-885X
The on-surface synthesis of edge-functionalized graphene nanoribbons (GNRs) is challenged by the stability of the functional groups throughout the thermal reaction steps of the synthetic pathway. Edge fluorination is a particularly critical case in which the interaction with the catalytic substrate and intermediate products can induce the complete cleavage of the otherwise strong C-F bonds before the formation of the GNR. Here, we demonstrate how a rational design of the precursor can stabilize the functional group, enabling the synthesis of edge-fluorinated GNRs. The survival of the functionalization is demonstrated by tracking the structural and chemical transformations occurring at each reaction step with complementary X-ray photoelectron spectroscopy and scanning tunneling microscopy measurements. In contrast to previous attempts, we find that the C-F bond survives the cyclodehydrogenation of the intermediate polymers, leaving a thermal window where GNRs withhold more than 80% of the fluorine atoms. We attribute this enhanced stability of the C-F bond to the particular structure of our precursor, which prevents the cleavage of the C-F bond by avoiding interaction with the residual hydrogen originated in the cyclodehydrogenation. This structural protection of the linking bond could be implemented in the synthesis of other sp2-functionalized GNRs.