Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 998
Encontrada(s) 10 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Kinetics of low field gradient magnetophoresis in the presence of magnetically induced convection

  • Leong, Sim Siong|||0000-0001-8247-0169
  • Ahmad, Zainal
  • Camacho, Juan|||0000-0002-8095-4167
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Lim, JitKang|||0000-0002-3205-1617
Previous work (Leong et al. Soft Matter 2015, 11, 6968) has demonstrated, by using both experiments and simulations, that a magnetic field gradient can induce substantial convective currents during magnetophoresis of superparamagnetic nanoparticles in the solution. This effect substantially enhances the efficiency of low gradient magnetic separation (LGMS) processes. Throughout the LGMS process, this circulating flow plays a dominant role in homogenizing the nanoparticle solution and enhancing the vertical motion of particles. Here we perform a detailed quantitative study of the factors affecting the kinetics of LGMS in the presence of magnetically induced convection. In particular, we have found that the magnetophoretic collection rate of magnetic nanoparticles in LGMS is solely determined by the magnetic field gradient at the surface of contact of the dispersion cuvette with the magnet (denoted as the "collection plane of particles" in this work) and the area of this surface. Surprisingly, the kinetics of LGMS is independent of the magnetic field distribution across the solution subjected to magnetophoresis as long as magnetically induced convection is present. These conclusions are of crucial relevance in the design of low gradient magnetic separators for engineering applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Predicting the self-assembly of superparamagnetic colloids under magnetic fields

  • Faraudo, Jordi|||0000-0002-6315-4993
  • Andreu Segura, Jordi
  • Calero, Carlos|||0000-0002-1977-1724
  • Camacho, Juan|||0000-0002-8095-4167
Self-assembly processes are very important in material sciences but are particularly difficult to predict quantitatively. This is the case for particulate magnetic materials in which field-induced self-assembly processes are essential. This article describes the recent advances in the development of predictive theoretical tools for the study of directed self-assembly of superparamagnetic colloids under magnetic fields. A practical view is presented of how to employ the new concepts (derived from thermodynamic theory) to predict the possible assembled structures from the properties of the colloids and thermodynamic conditions. Quantitative prediction of kinetics is also discussed for the cases in which equilibrium theory is not relevant. Finally, an outline of fundamental aspects of the theory is presented.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unified view of magnetic nanoparticle separation under magnetophoresis

  • Leong, Sim Siong|||0000-0001-8247-0169
  • Ahmad, Zainal
  • Low, Siew Chun|||0000-0002-1827-5665
  • Camacho, Juan|||0000-0002-8095-4167
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Lim, JitKang|||0000-0002-3205-1617
The migration process of magnetic nanoparticles and colloids in solution under the influence of magnetic field gradients, which is also known as magnetophoresis, is an essential step in the separation technology used in various biomedical and engineering applications. Many works have demonstrated that in specific situations, separation can be performed easily with the weak magnetic field gradients created by permanent magnets, a process known as low-gradient magnetic separation (LGMS). Due to the level of complexity involved, it is not possible to understand the observed kinetics of LGMS within the classical view of magnetophoresis. Our experimental and theoretical investigations in the last years unravelled the existence of two novel physical effects that speed up the magnetophoresis kinetics and explain the observed feasibility of LGMS. Those two effects are (i) cooperative magnetophoresis (due to the cooperative motion of strongly interacting particles) and (ii) magnetophoresis-induced convection (fluid dynamics instability originating from inhomogeneous magnetic gradients). In this feature article, we present a unified view of magnetophoresis based on the extensive research done on these effects. We present the physical basis of each effect and also propose a classification of magnetophoresis into four distinct regimes. This classification is based on the range of values of two dimensionless quantities, namely, aggregation parameter N∗ and magnetic Grashof number Grm, which include all of the dependency of LGMS on various physical parameters (such as particle properties, thermodynamic parameters, fluid properties, and magnetic field properties). This analysis provides a holistic view of the classification of transport mechanisms in LGMS, which could be particularly useful in the design of magnetic separators for engineering applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Narrowing the Zero-Field Tunneling Resonance by Decreasing the Crystal Symmetry of Mn12 Acetate

  • Espín Martí, Jordi|||0000-0001-6381-6259
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Imaz, Inhar|||0000-0002-0278-1141
  • Chudnovsky, Eugene|||0000-0002-1880-3966
  • Tejada, Javier|||0000-0001-9246-5566
  • Zarzuela, Ricardo|||0000-0003-1765-1697
  • Statuto, Nahuel|||0000-0002-0062-760X
We report the discovery of a less symmetric crystalline phase of Mn acetate, a triclinic phase, resulting from recrystallizing the original tetragonal phase reported by Lis in acetonitrile and toluene. This new phase exhibits the same structure of Mn acetate clusters and the same positions of tunneling resonances on the magnetic field as the conventional tetragonal phase. However, the width of the zero-field resonance is at least 1 order of magnitude smaller - can be as low as 50 Oe - indicating very small inhomogeneous broadening due to dipolar and nuclear fields.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

HKUST-1 metal-organic framework nanoparticle/graphene oxide nanocomposite aerogels for CO2and CH4Adsorption and separation

  • Rosado, Albert|||0000-0003-3222-9566
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Fraile, Julio|||0000-0003-2961-7920
  • Navarro, Jorge A. R.|||0000-0002-8359-0397
  • Suárez-García, Fabián|||0000-0002-1970-293X
  • Stylianou, Kyriakos C.|||0000-0003-1670-0020
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Giner Planas, José|||0000-0002-1648-2169
  • Domingo, Concepción|||0000-0001-7857-2760
  • Yazdi, Amirali|||0000-0001-9420-8504
The development of nanostructured composites made of metal-organic frameworks (MOFs) and graphene-based components, including exfoliated nanoplates of graphene oxide (GO) or reduced (rGO) graphene oxide, is an area of great interest in gas storage and separation. To improve the industrial viability, it is commonly demanded to build these nanocomposites with the shape of compact units, such as monoliths, foams, pellets, or films. Methods to generate those 3D nanocomposites involving rGO are abundant; however, they become scarce when GO is the desired support due to the difficulty in maintaining the carbon matrix oxidized during the structuration process. In this work, a methodology based on the use of supercritical CO2 (scCO2) is described for the synthesis of nanocomposites involving a discontinuous MOF phase, e.g. nanoparticles (NPs) of HKUST-1, decorating the surface of a continuous GO matrix, with surface oxygen groups favoring MOF attachment. The use of this new supercritical methodology allows the nanostructuration of the composite in the form of 3D aerogels while avoiding the reduction of GO. Enhanced values of textural properties, determined by low-temperature N2 adsorption-desorption, were observed for the nanocomposites in comparison to the values calculated for similar physical mixtures, highlighting an increase of 40-45% in the value of the surface area for samples with a high percentage of HKUST-1. Moreover, the composite aerogels, displaying a type II isotherm, outperform pristine HKUST-1 in regard to the CH4 practical working capacity at high pressure. Particularly, a composite exhibiting more than 2-fold the working capacity of net HKUST-1 NPs was obtained. Columns involving the composite aerogel as the stationary phase were used to study the separation of N2/CO2 and CH4/CO2 gas mixtures. The results showed a high selectivity of the nanostructured HKUST-1@GO composites for CO2, with breakthrough times of ca. 20 min g-1 and stable cyclic operations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Exogenous bacterial cellulose induces plant tissue regeneration through the regulation of cytokinin and defense networks

  • Ruiz Solaní, Nerea|||0000-0002-0813-0956
  • Alonso-Díaz, Alejandro|||0000-0002-7819-3848
  • Capellades, Montserrat|||0000-0001-9514-2885
  • Serrano-Ron, Laura|||0000-0001-5180-6547
  • Ferro-Costa, Miquel|||0000-0002-1458-7004
  • Sanchez-Corrionero, Álvaro|||0000-0001-5360-0294
  • Rabissi, Agnese
  • Argueso, Cristiana T.|||0000-0001-7097-9304
  • Rubio-Somoza, Ignacio|||0000-0003-0754-816X
  • Laromaine, Anna|||0000-0002-4764-0780
  • Moreno-Risueno, Miguel Angel|||0000-0002-9794-1450
  • Sánchez Coll, Núria|||0000-0002-8889-0399
Regeneration is a unique feature of postembryonic development extensively observed in plants. The capacity to induce regeneration exogenously is limited and usually confined to meristematic-like tissues. We show that bacterial cellulose (BC), but not other structurally similar matrixes, induces postwounding regeneration in nonmeristematic plant tissues via a distinctive route to callus-mediated regenerative programs. The BC-specific program involves cytokinin operating concurrently with strongly activated plant biotic response genes to induce plant regeneration. A reactive oxygen species (ROS) burst, normally associated with defense responses, is sustained upon BC application, involving a network of tightly interconnected transcription factors, where WRKY8, known for regulating stress responses, shows a clustering and hierarchical prevalence. WRKY8 regulates BC-mediated plant regeneration and ROS homeostasis, including superoxide anion accumulation, to potentially promote cell proliferation after wounding. Collectively, our results demonstrate that the cytokinin- and ROS-associated defense responses can be targeted by BC application to promote plant wound regeneration through alternative regenerative programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Functional oxides in photonic integrated devices

  • Herranz, Gervasi
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore¿s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community., Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stability and nature of the volume collapse of epsilon-Fe2O3 under extreme conditions

  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
  • Monteseguro, Virginia
  • Garbarino, Gastón
  • Gich, Marti
  • Cerantola, Valerio
  • Cuartero, Vera
  • Monte-Caballero, Manuel
  • Irifune, Tetsuo
  • Muñoz, Alfonso
  • Popescu, Catalin
[EN] Iron oxides are among the major constituents of the deep Earth's interior. Among them, the epsilon phase of Fe2O3 is one of the less studied polymorphs and there is a lack of information about its structural, electronic and magnetic transformations at extreme conditions. Here we report the precise determination of its equation of state and a deep analysis of the evolution of the polyhedral units under compression, thanks to the agreement between our experiments and ab-initio simulations. Our results indicate that this material, with remarkable magnetic properties, is stable at pressures up to 27 GPa. Above 27 GPa, a volume collapse has been observed and ascribed to a change of the local environment of the tetrahedrally coordinated iron towards an octahedral coordination, finding evidence for a different iron oxide polymorph., We are thankful for the financial support received from the Spanish Ministry of Economy and Competitiveness for the Ramon y Cajal Fellowship to J.A.S. (RYC-2015-17482), for Juan de la Cierva Fellowship to V.M. (FJCI-2016-27921), and the national projects FIS2017-83295-P, MAT2016-75586-C4-1/2/3-P, MAT2015-64442-R, and the "Severo Ochoa" Programme for Centres of Excellence in R&D (SEV-2015-0496) co-funded by ERDF of European Union. The Generalitat de Catalunya is also acknowledged for financial support (project 2017SGR765). We acknowledge the ESRF and ALBA synchrotrons for providing beamtime. We also thank D. Santamaria-Perez and J. Ibanez for fruitful discussions.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Film quality and electronic properties of a surfaceanchored metal-organic framework as revealed by a multi-technique approach

  • Liu, Jianxi
  • Paradinas, Markos
  • Heinke, Lars
  • Buck, Manfred
  • Ocal, Carmen
  • Mugnaini, Veronica
  • Wöll, Christof
The virtually unlimited versatility and unparalleled level of control in the design of metal-organic frameworks (MOFs) has recently been shown to also entail a potential for applications based on the electrical and electronic properties of this rich class of materials. At present, methods to provide reliable and reproducible contacts to MOF materials are scarce; therefore, we have carried out a detailed, multi-technique investigation of an empty and loaded prototype MOF, HKUST-1. Epitaxial thin films of this material grown on a substrate by using liquid-phase epitaxy have been studied by cyclic voltammetry, atomic force microscopy, and quartz crystal microbalance and their quality assessed. By using an ionic liquid as the electrolyte, it is shown that redox-active molecules like ferrocene can be embedded in the pores, enabling a change in the overall conductivity of the framework and the study of the redox chemistry of guest molecules inside the MOF., VM acknowledges the EU for the funding through the granting of a Marie Curie Intra-European Fellowship (FP7-PEOPLE-2011; MOLSURMOF-301110). JL acknowledges the program of China Scholarship Council (CSC) for financial support. VM, JL and CW acknowledge A. Terfort for supplying the thiol derivatives. MP and CO acknowledge financial support from the Spanish Government through grants projects MAT2013-47869-C4-1-P and SEV-2015–0496, and Generalitat de Catalunya through grant project 2014 SGR 501., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge transfer and 2kF vs 4kF instabilities in the NMP-TCNQ molecular metal and (NMP)x(Phen)1xTCNQ solid solutions

  • Alemany, Pere
  • Pouget, Jean-Paul
  • Canadell, Enric
A first-principles DFT study of the electronic structure of the two-chain molecular conductor NMP-TCNQ is reported. It is shown that the charge transfer occurring in this salt is not 1 but 2/3, finally settling the debate concerning the real charge transfer in this molecular metal. These calculations also lead to a simple rationalization of the three different regimes of 2kF and 4kF CDW instabilities occurring in the solid solutions (NMP)x(Phen)1−xTCNQ., One of us (JPP) thanks A. J. Epstein for collaborations in the study of the (NMP)x(Phen)1xTCNQ system. This work was supported by MINECO (Spain) through Grants FIS2012-37549-C05-05 and CTQ2011-23862-C02- 02, as well as Generalitat de Catalunya (2014SGR301 and XRQTC). E.C. acknowledges support of the Span- ish MINECO through the Severo Ochoa Centers of Ex- cellence Program under Grant SEV-2015-0496., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanotexturing to enhance photoluminescent response of atomically thin indium selenide with highly tunable band gap

  • Brotons-Gisbert, Mauro
  • Hidalgo, Francisco
  • Tobias, Gerard
  • Canadell, Enric
  • Ordejón, Pablo
  • Martínez Pastor, Juan Pascual
  • Sánchez-Royo, Juan F.
Brotons-Gisbert, Mauro et al., Manipulating properties of matter at the nanoscale is the essence of nanotechnology, which has enabled the realization of quantum dots, nanotubes, metamaterials, and two-dimensional materials with tailored electronic and optical properties. Two-dimensional semiconductors have revealed promising perspectives in nanotechnology. However, the tunability of their physical properties is challenging for semiconductors studied until now. Here we show the ability of morphological manipulation strategies, such as nanotexturing or, at the limit, important surface roughness, to enhance light absorption and the luminescent response of atomically thin indium selenide nanosheets. Besides, quantum-size confinement effects make this two-dimensional semiconductor to exhibit one of the largest band gap tunability ranges observed in a two-dimensional semiconductor: from infrared, in bulk material, to visible wavelengths, at the single layer. These results are relevant for the design of new optoelectronic devices, including heterostructures of two-dimensional materials with optimized band gap functionalities and in-plane heterojunctions with minimal junction defect density., This work was supported by the Spanish Government (Grant Nos. TEC2014-53727-C2-1-R and MAT2014-53500-R as well as Grants FIS2015-64886-C5-3-P and FIS2015-64886-C5-4-P), the Comunidad Valenciana Government (Grant No. PROMETEOII/ 2014/059), and the Generalitat de Catalunya Government (2014SGR301). The work at Berkeley was supported by National Science Foundation No. DMR-1306601. Authors thank the Central Support Service for Experimental Research (SCSIE) (SEM and Micro-PL facilities) of the University of Valencia. J.F.S.R. acknowledges financial support from the Mobility Program of VLC-CAMPUS. E.C., G.T., F.H., and P.O. acknowledge support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grants SEV-2015-0496 and SEV-2013-0295. F.H. acknowledges support of CONACYT. M.B.G. acknowledges his fellowship no. UVINV-PREDOC13-110538 under the program “Atracció de Talent, VLC-CAMPUS” of the University of Valencia. D.A.P. acknowledges his contract CPI-15-276 under the program PROMETEOII/2014/059., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Localization versus delocalization in chiral single component conductors of gold bis(dithiolene) complexes

  • Branzea, Diana G.
  • Pop, Flavia
  • Auban-Senzier, Pascale
  • Clérac, Rodolphe
  • Alemany, Pere
  • Canadell, Enric
  • Avarvari, Narcis
The first examples of chiral single component conductors are reported. Both (S,S) and (R,R) enantiomers of 5,6-dimethyl-5,6-dihydro-1,4-dithiin-2,3-dithiolate (dm-dddt) ligand have been used to prepare anionic metal bis(dithiolene) complexes formulated as ([(n-Bu)4N][M(dm-dddt)2] (M = Au, Ni), which are isostructural according to single crystal X-ray analysis. Single crystal transport measurements indicate semiconducting behavior for the anionic radical Ni complexes, with low room temperature conductivity values and high activation energies. Electrocrystallization experiments provided neutral [M(dm-dddt)2] (M = Au, Ni) complexes. The neutral radical gold compounds show intermolecular S···S interactions in the solid state giving rise to layers interconnected through weak C–H···S hydrogen bonds. The most peculiar structural feature concerns a dissymmetry between the two dithiolene moieties, while the nickel counterpart is symmetric. Single crystal resistivity measurements show thermally activated behavior for the open-shell gold complexes, with room temperature conductivity values of 0.02–0.04 S·cm–1 and activation energies strongly influenced by hydrostatic pressure. A thorough theoretical study on nickel anion radical and gold neutral radical bis(dithiolene) complexes applied to the chiral complexes [M(dm-dddt)2] (M = Au, Ni–) and to a series of previously reported compounds addressed the issue of symmetry versus asymmetry from an electronic coupling perspective between the two dithiolene ligands. It results that neutral gold complexes with dithiolene ligands without extended delocalization are Class II mixed-valent compounds in the Robin and Day classification, presenting an inherent tendency toward asymmetric structures, which can be however modulated by the intermolecular organization in the solid state., This work was supported in France by the National Agency for Research (ANR Inter, ANR-12-IS07-0004-04, CREMM Project), the Region Pays de la Loire (grant for D.B.), the CNRS, the University of Angers, the University of Bordeaux and the Aquitaine Region. Work in Spain was supported by the Spanish Ministerio de Economía y Competitividad (Grants FIS2012- 37549-C05-05, FIS2015-64886-C5-4-P and CTQ2015-64579- C3-3-P) and Generalitat de Catalunya (2014SGR301 and XRQTC). E.C. acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2015-0496., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct multipulse laser processing of titanium oxide–graphene oxide nanocomposite thin films

  • Pérez del Pino, Ángel
  • Datcu, Angela
  • Gyorgy, Eniko
Nanocomposite thin films consisting of titanium oxide (TiO2) nanoparticles (NPs) and graphene oxide (GO) platelets were deposited by a spin-coating technique. The obtained films were submitted to direct laser irradiation using a frequency quadrupled Nd:YAG (λ=266 nm, τFWHM≅3 ns, ν=10 Hz) laser source. The effect of the laser processing conditions, as laser fluence value and number of subsequent laser pulses incident onto the same target location, on the surface morphology, crystalline structure, and chemical composition of the TiO2/GO nanocomposite thin films was systematically investigated. The laser fluence values were maintained below the vaporization threshold of the irradiated composite material. With the increase of the laser fluence and number of incident laser pulses melting and coalescence of the TiO2 NPs into inter-connected aggregates as well as rippling of the GO platelets take place. The gradual reduction of GO platelets and the onset of anatase to rutile phase transition were observed at high laser fluence values., The authors acknowledge the financial support from the Romanian Ministry of Education and Scientific Research under the Contract PNII-ID-PCE-2012-4-0292 and the Spanish Ministry of Economy and Competitiveness under the Contracts ENE2014-56109-C3-3-R and SEV-2015-0496., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Untangling the contributions of cerium and iron to the magnetism of Ce-doped yttrium iron garnet

  • Casals, Blai
  • Espínola, Marina
  • Cichelero, Rafael
  • Geprägs, Stephan
  • Opel, Matthias
  • Gross, Rudolf
  • Herranz, Gervasi
  • Fontcuberta, Josep
The remarkable magnetic properties of yttrium iron garnets (YIGs) underpin the use of these materials in a broad scope of spintronic and photonic applications. In particular, the addition of rare earth metals in the structure enhances to a great extent the magneto-optical activity, which is beneficial for the development of nonreciprocal optical devices. Exploiting the wavelength selectivity of magneto-optics, we have identified a range of frequencies at which one can unravel the individual contributions to the magnetism and gyrotropic response arising from cerium and iron. We envision that this outcome may pave the way to further experiments to assess quantitatively the effect on the optical properties of rare earth incorporation into YIG., This work was supported by the Spanish Government by the MAT2011-29269-C03, MAT2014-56063-C2-1-R, and the Severo Ochoa SEV-2015-0496 Projects and the Generalitat de Catalunya (2014 SGR 734 Project). B.C. acknowledges his grant FPI BES-2012-059023 and R.C. acknowledges his fellowship from CNPq - Brazil. S.G., M.O., and R.G. thank T. Brenninger and E. Zamburg for technical support. We also acknowledge the contribution of C. Rubio in preliminary structural and magnetic characterization of thin films as well as Dr. F. Sanchez for scientific guiding and discussions on materials issues., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Three Redox States of a Diradical Acceptor−Donor−Acceptor Triad: Gating the Magnetic Coupling and the Electron Delocalization

  • Souto Salom, Manuel
  • Lloveras, Vega
  • Vela Llausi, Sergi
  • Fumanal, Maria
  • Ratera, Immaculada
  • Veciana, Jaume
The diradical acceptor–donor–acceptor triad 1••, based on two polychlorotriphenylmethyl (PTM) radicals connected through a tetrathiafulvalene(TTF)–vinylene bridge, has been synthesized. The generation of the mixed-valence radical anion, 1•–, and triradical cation species, 1•••+, obtained upon electrochemical reduction and oxidation, respectively, was monitored by optical and ESR spectroscopy. Interestingly, the modification of electron delocalization and magnetic coupling was observed when the charged species were generated and the changes have been rationalized by theoretical calculations., This work was supported by the DGI grant (CTQ2013-40480- R), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), and the Generalitat de Catalunya (grant 2014-SGR-17). ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). M.S. is enrolled in the Material Science Ph.D. program of UAB and is grateful to MEC for a FPU predoctoral grant. S.V. and M.F. are thankful to the LabEx-Chemistry of Complex Systems for postdoctoral grants (ANR-10-LABX-0026CSC) and to the regional High-Performance Computing (HPC) center in Strasbourg for computational resources. We thank Amable Bernabé for the MALDI spectroscopy., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser-induced chemical transformation of freestanding graphene oxide membranes in liquid and gas ammonia environments

  • Pérez del Pino, Ángel
  • Gyorgy, Eniko
  • Cotet, C.
  • Baia, L.
  • Logofatu, Constantin
Laser-induced chemical conversion of graphene oxide (GO) is an effective way to modify its properties and expand its potential use for numerous applications. In this work, a mechanically stable and flexible free-standing GO membrane is synthesized and further processed by ultraviolet laser radiation in gas and liquid ammonia-rich environments. Electron and atomic force microscopy, as well as X-ray photoelectron spectroscopy analysis, reveal that laser irradiation in gas leads to a large defect-induced morphology modification and high deoxygenation process, accompanied by the slight incorporation of nitrogen functionality to the reduced GO structure. Conversely, irradiation in liquid provokes significant integration of nitrogen groups, essentially amines, into a partially reduced GO structure, without evident modification of the morphology. Electrical measurements on the macro- and nano-scale point to a complex contribution of morphology and oxidized regions to the overall resistance of the rGO., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness under the project ENE2014-56109-C3-3-R, in addition to the Romanian National Authority for Scientific Research and Innovation, CNCS – UEFISCDI, under the Grants PN-II-ID-PCE-2012-4-0292 and PNII- RU-TE-2014-4-1194. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-Component Conductors: A Sturdy Electronic Structure Generated by Bulky Substituents

  • Filatre-Furcate, Agathe
  • Bellec, Nathalie
  • Jeannin, Olivier
  • Auban-Senzier, Pascale
  • Fourmigué, Marc
  • Íñiguez, Jorge
  • Canadell, Enric
  • Brière, Benjamin
  • Ta Phuoc, Vinh
  • Lorcy, Dominique
We thank the CDIFX (Rennes) for access to the X-ray diffraction facilities and the ANR (France) for financial support through project n°12-BS07-0032. Work in Bellaterra was supported by MINECO (Spain) through Grant FIS2012-37549-C05-05 and Generalitat de Catalunya (2014SGR301). J.I. was financially supported by the Fond National de Recherche Luxembourg through a PEARL grant (FNR/P12/4853155/Kreisel) and by MINECO-Spain (Grant No. MAT2013-40581-P). E.C. acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2015-0496., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Prominent local transport in silicon carbide composites containingin-situ synthesized three-dimensional graphene networks

  • Miranzo López, Pilar
  • López Mir, Laura
  • Román-Manso, Benito
  • Belmonte, Manuel
  • Osendi, María Isabel
  • Ocal, Carmen
In-situ grown graphene/SiC composites developed by spark plasma sintering have emerged as a very interesting family of materials with expected high performance for advanced applications. In this work, the local functional properties of graphene/SiC ceramics are elucidated for distinct α- and β- SiC polytypes combining scanning probe microscopies. We unambiguously identify all composite constituents and demonstrate the formation of a three-dimensional graphene conductive network inside the composite. The investigated composites exhibit grains with different doping level depending on growth rate during sintering so that conduction paths associated to graphene and matrix networks may compete. The relevance of nanoscale characterization on functional graphene/semiconductor materials is proved as it evidences the type of doping and carrier concentration of the semiconductor and the critical role played by the graphene constituent in the formation of ohmic contacts. Both issues of crucial importance for understanding the macroscale behavior of these materials and determine their applications., This work has been supported by the Spanish Government under projects MAT2013-47869-C4-1-P, MAT2012-32944 and CSIC (PIE201360E063). C. O acknowledges the Spanish MINECO through the Severo Ochoa Program (SEV-2015-0496) and the Generalitat de Catalunya through 2014 SGR 501. L. LM and B. RM thank the Spanish MINECO for FPI BES-2013-063424 and FPI BES-2010-041382 FPI fellowships. The authors acknowledge L. Garzón for his help with some SFM data., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Giant Optical Polarization Rotation Induced by Spin-Orbit Coupling in Polarons

  • Casals, Blai
  • Cichelero, Rafael
  • García Fernández, Pablo
  • Junquera, Javier
  • Pesquera, David
  • Campoy Quiles, Mariano
  • Infante, Ingrid C.
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
  • Herranz, Gervasi
We have uncovered a giant gyrotropic magneto-optical response for doped ferromagnetic manganite La2/3Ca1/3MnO3 around the near room-temperature paramagnetic-to-ferromagnetic transition. At odds with current wisdom, where this response is usually assumed to be fundamentally fixed by the electronic band structure, we point to the presence of small polarons as the driving force for this unexpected phenomenon. We explain the observed properties by the intricate interplay of mobility, Jahn-Teller effect and spin-orbit coupling of small polarons. As magnetic polarons are ubiquitously inherent to many strongly correlated systems, our results provide an original, general pathway towards the generation of magnetic-responsive gigantic gyrotropic responses that may open novel avenues for magnetoelectric coupling beyond the conventional modulation of magnetization., This work was supported by the Spanish Government through Projects No. MAT2014-56063-C2-1-R, No. FIS2012-37549-C05-04, No. FIS2015-64886-C5-2- P, No. MAT2012-37776, and the Severo Ochoa SEV-2015-0496 grant and the Generalitat de Catalunya (2014 SGR 734 project). B. C. acknowledges Grant No. FPI BES- 2012-059023, R. C. acknowledges support from CNPq— Brazil, and P. G. F. recognizes support from Ramón and Cajal Grant No. RYC-2013-12515., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Micro and nano-patterning of single-crystal diamond by swift heavy ion irradiation

  • García, Gustavo
  • López Mir, Laura
  • Ocal, Carmen
  • Díaz-Hijar, M.
  • Olivares Villegas, José
G. García et al., This paper presents experimental data and analysis of the structural damage caused by swift-heavy ion irradiation of single-crystal diamond. The patterned buried structural damage is shown to generate, via swelling, a mirror-pattern on the sample surface, which remains largely damage-free. While extensive results are available for light ion implantations, this effect is reported here for the first time in the heavy ion regime, where a completely different range of input parameters (in terms of ion species, energy, stopping power, etc.) is available for customized irradiation. The chosen ion species are Au and Br, in the energy range 10-40 MeV. The observed patterns, as characterized by profilometry and atomic force microscopy, are reported in a series of model experiments, which show swelling patterns ranging from a few nm to above 200 nm. Moreover, a systematic phenomenological modelling is presented, in which surface swelling measurements are correlated to buried crystal damage. A comparison is made with data for light ion implantations, showing good compatibility with the proposed models. The modelling presented in this work can be useful for the design and realization of micropatterned surfaces in single crystal diamond, allowing to generate highly customized structures by combining appropriately chosen irradiation parameters and masks., GG acknowledges support from the ALBA synchrotron, W. Schildkamp for inspiring discussions on the behavior of diamond and J. Ferrer for his help in experiment preparation. GG, MD-H, VT-M, OP-R and JO acknowledge the projects MAT-2011-28379-C03-02 of the Spanish Ministry of Economy and Competitiveness, TECHNOFUSION(II)¬CM (S2013/MAE¬2745) of the Community of Madrid, and Moncloa Campus of International Excellence (UCM-UPM) foundation for offering a PICATA postdoctoral fellowship (OP-R). FP is supported by the “DiNaMo” project n° 157660 funded by National Institute of Nuclear Physics. PO is supported by the FIRB “Futuro in Ricerca 2010” project (CUP code: D11J11000450001) funded by MIUR and by the “A.Di.N-Tech.” project (CUP code: D15E13000130003) funded by the University of Torino and “Compagnia di San Paolo”. The MeV ion beam implantations performed at the INFN Legnaro National Laboratories was supported by the “Dia.Fab.” experiment, and those at the INFN LABEC Laboratory by the “FARE” and “CICAS” experiments. NMP is supported by the European Research Council (ERC StG Ideas 2011 BIHSNAM n. 279985, ERC PoC 2013-2 KNOTOUGH n. 632277 and ERC PoC 2015 SILKENE no. 693670), by the European Commission under the Graphene Flagship ("Nanocomposites", n. 604391). FB acknowledges support from BIHSNAM. LL-M and CO acknowledge the Spanish MINECO through the Severo Ochoa Program (SEV-2015-0496) and MAT2013-47869-C4-1-P. CO acknowledges the specific agreement between ICMAB-CSIC and the Synchrotron Light Facility ALBA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Binary supercritical CO2 solvent mixtures for the synthesis of 3D metal-organic frameworks

  • López Periago, Ana M.
  • López-Domínguez, Pedro
  • Pérez Barrio, Jorge
  • Tobias, Gerard
  • Domingo, Concepción
Efficient and sustainable synthesis of MOFs, as nano or microcrystalline powder, is crucial for the development of new applications for these compounds. For this purpose, the synthesis of Zn2þ, Cu2þ and Fe3þ-based MOFs was attempted in this study by using a binary medium consisting of supercritical CO2 mixed with an ionic liquid (emimBF4 or emimBr). In comparison with conventional solvothermal and ionothermal synthesis, MOFs were herein obtained under mild reaction conditions, i.e. 200 bar and 65 C, after relatively short reaction periods (<10 h). To explore the described synthesis method as a generic procedure for the preparation of three-dimensional MOFs, different linkers of the imidazole and carboxylic acid families were tested. Widely investigated MOFs, such as ZIF-8 and HKUST-1, were prepared along with the complex mesoporous MIL-100(Fe). The structure and composition of the synthesized materials were determined by X-ray powder diffraction and elemental analysis. N2 adsorption at low temperature was used to assess the textural properties., This work was partially financed by the Spanish National Plan of Research CTQ2014-56324-CO2-P1 and MAT2014-53500-R, the Generalitat de Catalunya 2014SGR377 and Fundaci on Iberdrola. Authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496). A. L opez-Periago acknowledges the RyC-2012-11588 contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal transport in porous Si nanowires from approach-to-equilibrium molecular dynamics calculations

  • Cartoixà, Xavier
  • Dettori, Riccardo
  • Melis, Claudio
  • Colombo, Luciano
  • Rurali, Riccardo
We study thermal transport in porous Si nanowires (SiNWs) by means of approach-to-equilibrium molecular dynamics simulations. We show that the presence of pores greatly reduces the thermal conductivity, j, of the SiNWs as long mean free path phonons are suppressed. We address explicitly the dependence of j on different features of the pore topology—such as the porosity and the pore diameter—and on the nanowire (NW) geometry—diameter and length. We use the results of the molecular dynamics calculations to tune an effective model, which is capable of capturing the dependence of j on porosity and NW diameter. The model illustrates the failure of Matthiessen’s rule to describe the coupling between boundary and pore scattering, which we account for by the inclusion of an additional empirical term., We acknowledge financial support by the Spanish MINECO under Grant Nos. FIS2012-37549-C05-02, MAT2013-40581-P, TEC2012-31330 (co-funded by the EU under the FEDER Program), and TEC2015-67462-C2-1-R (MINECO/FEDER) and through the Severo Ochoa Centres of Excellence Program under Grant Nos. SEV-2013-0295 and SEV-2015-0496; the Generalitat de Catalunya under Grant Nos. 2014 SGR 301 and 2014 SGR 384; the Regione Sardegna basic research Project No. CRP78744 “Energy Applications with Porous Silicon (ENAPSi).” One of us (R.D.) acknowledges Regione Sardegna for financial support under Project P.O.R. Sardegna F.S.E. 2007-2013 (Axis IV Human Resources, Objective l.3, Line of Activity l.3.1.). The calculations have been performed at the Barcelona Supercomputing Center (BSC-CNS) within the project “Nanoporous silicon for thermoelectric applications (FI-2015-1-0010)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal rectification in silicon by a graded distribution of defects

  • Dettori, Riccardo
  • Melis, Claudio
  • Rurali, Riccardo
  • Colombo, Luciano
We discuss about computer experiments based on nonequilibrium molecular dynamics simulations providing evidence that thermal rectification can be obtained in bulk Si by a non-uniform distribution of defects. We consider a graded population of both Ge substitutional defects and nanovoids, distributed along the direction of an applied thermal bias, and predict a rectification factor comparable to what is observed in other low–dimensional Si–based nanostructures. By considering several defect distribution profiles, thermal bias conditions, and sample sizes, the present results suggest that a possible way for tuning the thermal rectification is by defect engineering., We acknowledge the financial support by the Spanish MINECO under Grant Nos. FEDER-FIS2012-37549-C05-02, FEDER-MAT2013-40581-P, TEC2012-31330, and TEC2015-67462-C2-1-R, the Generalitat de Catalunya under Grant Nos. 2014 SGR 301 and 2014 SGR 384, and the Spanish MINECO through the Severo Ochoa Centres of Excellence Program under Grant Nos. SEV-2013-0295 and SEV-2015-0496. We also acknowledge the financial support by the Regione Sardegna basic research project CRP78744 “Energy Applications with Porous Silicon (ENAPSi).” One of us (R.D.) acknowledges Regione Sardegna for the financial support under project P.O.R. Sardegna F.S.E. 2007-2013 (Axis IV Human Resources, Objective l.3, Line of Activity l.3.1.). We finally acknowledge the computational support by CINECA under ISCRA project TREWI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Band gap engineering of MoS2 upon compression

  • López Suárez, Miquel
  • Neri, Igor
  • Rurali, Riccardo
Molybdenum disulfide (MoS2) is a promising candidate for 2D nanoelectronic devices, which shows a direct band-gap for monolayer structure. In this work we study the electronic structure of MoS2 upon both compressive and tensile strains with first-principles density-functional calculations for different number of layers. The results show that the band-gap can be engineered for experimentally attainable strains (i.e., ±0.15). However, compressive strain can result in bucking that can prevent the use of large compressive strain. We then studied the stability of the compression, calculating the critical strain that results in the on-set of buckling for free-standing nanoribbons of different lengths. The results demonstrate that short structures, or few-layer MoS2, show semi-conductor to metal transition upon compressive strain without bucking., M.L.S. and I.N. gratefully acknowledge financial support from the European Commission (FPVII, Grant Agreement No. 318287, LANDAUER and Grant Agreement No. 611004, ICT-Energy). R.R. acknowledges the Severo Ochoa Centres of Excellence Program under Grant No. SEV-2015-0496, funding under Contracts Nos. FEDER-MAT2013-40581-P of the Ministerio de Economía y Competitividad (MINECO) and Grant No. 2014 SGR 301 of the Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heat transport through a solid–solid junction: the interface as an autonomous thermodynamic system

  • Rurali, Riccardo
  • Colombo, Luciano
  • Cartoixà, Xavier
  • Wilhelmsen, Øivind
  • Trinh, Thuat T.
  • Bedeaux, Dick
  • Kjelstrup, Signe
We perform computational experiments using nonequilibrium molecular dynamics simulations, showing that the interface between two solid materials can be described as an autonomous thermodynamic system. We verify the local equilibrium and give support to the Gibbs description of the interface also away from the global equilibrium. In doing so, we reconcile the common formulation of the thermal boundary resistance as the ratio between the temperature discontinuity at the interface and the heat flux with a more rigorous derivation from nonequilibrium thermodynamics. We also show that thermal boundary resistance of a junction between two pure solid materials can be regarded as an interface property, depending solely on the interface temperature, as implicitly assumed in some widely used continuum models, such as the acoustic mismatch model. Thermal rectification can be understood on the basis of different interface temperatures for the two flow directions., We acknowledge financial support from the Ministerio de Economı´a y Competitividad (MINECO) under grant no. FIS2012-37549-C05-02, MAT2013-40581-P, TEC2012-31330 and TEC2015-67462-C2-1-R (co-funded by the EU under the FEDER program), the Generalitat de Catalunya under grant no. 2014 SGR 301 and 2014 SGR 384, and the Spanish MINECO through the Severo Ochoa Centres of Excellence Program under grant no. SEV-2013-0295 and SEV-2015-0496 and from the Research Council of Norway under Project no. 221672. The Department of Chemistry, Faculty of Science and Technology, Norwegian University of Science and Technology supported ØW, TT, DB, and SK., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Rapid, Low-Cost, and Scalable Technique for Printing State-of-the-Art Organic Field-Effect Transistors

  • Temiño, Inés
  • Pozo, Freddy G. del
  • Ajayakumar, Murugan
  • Galindo, Sergi
  • Puigdollers-González, Joaquim
  • Mas Torrent, Marta
In the last few years exciting advances have been achieved in developing printing techniques for organic semiconductors, and impressive mobility values have been reported for the resulting organic field-effect transistors (OFETs). However, not all these techniques are scalable and some of them require additional crystallization steps. This study reports on the fabrication of OFETs employing blends of four benchmark organic semiconductors with polystyrene and demonstrates that applying the same formulation and experimental conditions for printing them, highly reproducible and uniform crystalline films exhibiting high OFET performance are successfully achieved. It is noted that the mobility values achieved here are not the highest reported for the studied materials; however, they are state-of-the-art values and could be regarded as exceptional considering the low cost and fast speed of the fabrication process involved here., This work was mainly funded by the ERC StG 2012 306826 e GAMES and ERC PoC 2014 640120 LAB TECH projects. The authors also thank the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER BBN), the DGI (Spain) project BE WELL CTQ2013 40480 R, the Generalitat de Catalunya (2014 SGR 17) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV 2015 0496). The authors would like to thank the ICTS "NANBIOSIS", more specifically to the Nanotechnology Platform, unit of CIBER BBN at the Institute for Bioengineering of Catalonia (IBEC) for their assistance in ToF SIMS analyses. I. T. acknowledges FPU fellowship from the Ministery and the Materials Science PhD Program of Universitat Autònoma de Barcelona. F. G. D. P. thanks Universidad Técnica de Ambato and Secretaría de Educación Superior, Ciencia, Tecnología e Innovación for funding through a doctoral scholarship “Convocatoria abierta 2010”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spontaneous formation of spiral-like patterns with distinct periodic physical properties by confined electrodeposition of Co-In disks

  • Golvano-Escobal, Irati
  • Gonzalez Rosillo, Juan Carlos
  • Domingo, Neus
  • Illa, Xavi
  • López-Barbera, José Francisco
  • Fornell, Jordina
  • Suriñach, Santiago
  • Baró, María Dolors
  • Puig Molina, Teresa
  • Pané, Salvador
  • Nogués, Josep
  • Sort, Jordi
Golvano-Escobal, Irati et al., Spatio-temporal patterns are ubiquitous in different areas of materials science and biological systems. However, typically the motifs in these types of systems present a random distribution with many possible different structures. Herein, we demonstrate that controlled spatio-temporal patterns, with reproducible spiral-like shapes, can be obtained by electrodeposition of Co-In alloys inside a confined circular geometry (i.e., in disks that are commensurate with the typical size of the spatio-temporal features). These patterns are mainly of compositional nature, i.e., with virtually no topographic features. Interestingly, the local changes in composition lead to a periodic modulation of the physical (electric, magnetic and mechanical) properties. Namely, the Co-rich areas show higher saturation magnetization and electrical conductivity and are mechanically harder than the In-rich ones. Thus, this work reveals that confined electrodeposition of this binary system constitutes an effective procedure to attain template-free magnetic, electric and mechanical surface patterning with specific and reproducible shapes., This work has been partially funded by the 2014-SGR-1015, 2014-SGR-1216 and 2014-SGR-753 projects from the Generalitat de Catalunya, the MAT2014-57960-C3-1-R, MAT2014-51778-C2-1-R and FIS2013-48668-C2-1-P from the Spanish Ministerio de Economía y Competitividad (MINECO) and the ‘Fondo Europeo de Desarrollo Regional’ (FEDER). Dr. Eva Pellicer and Dr. Neus Domingo are also grateful to MINECO for the “Ramon y Cajal” contracts (RYC-2012-10839 and RYC-2010-06365 respectively). ICN2 and ICMAB acknowledge support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295 and Grant SEV-2015-0496, respectively). The PEEM experiments were performed at CIRCE beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Untangling Electrostatic and Strain Effects on the Polarization of Ferroelectric Superlattices

  • Khestanova, Ekaterina
  • Dix, Nico
  • Fina, Ignasi
  • Scigaj, Mateusz
  • Rebled, José Manuel
  • Herranz, Gervasi
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Khestanova, Ekaterina et al., The polarization of ferroelectric superlattices is determined by both electrical boundary conditions at the ferroelectric/paraelectric interfaces and lattice strain. The combined infl uence of both factors offers new opportunities to tune ferroelectricity. However, the experimental investigation of their individual impact has been elusive because of their complex interplay. Here, a simple growth strategy has permitted to disentangle both contributions by an independent control of strain in symmetric superlattices. It is found that fully strained short-period superlattices display a large polarization whereas a pronounced reduction is observed for longer multilayer periods. This observation indicates that the electrostatic boundary mainly governs the ferroelectric properties of the multilayers whereas the effects of strain are relatively minor., Financial support by the Spanish Government [Projects MAT2014- 56063-C2-1-R and MAT2013-41506 ] and Generalitat de Catalunya ( 2014-SGR-734 and 2014-SGR-672 ) is acknowledged. ICMAB-CSIC authors acknowledge fi nancial support from the Spanish Ministry of Economy and Competitiveness , through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496 ). I.F. acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014- 19102) from the Spanish Ministry of Economy and Competitiveness. The transmission electron microscopy works were conducted in the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragón (Universidad de Zaragoza). The authors acknowledge the LMA-INA for offering access to their instruments and expertise. The authors thank Massimiliano Stengel for useful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monolithic integration of roomtemperature multifunctional BaTiO3-CoFe2O4 epitaxial heterostructures on Si(001)

  • Scigaj, Mateusz
  • Dix, Nico
  • Gázquez, Jaume
  • Varela, María
  • Fina, Ignasi
  • Domingo, Neus
  • Herranz, Gervasi
  • Skumryev, Vassil
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
The multifunctional (ferromagnetic and ferroelectric) response at room temperature that is elusive in single phase multiferroic materials can be achieved in a proper combination of ferroelectric perovskites and ferrimagnetic spinel oxides in horizontal heterostructures. In this work, lead-free CoFe2O4/BaTiO3 bilayers are integrated with Si(001) using LaNiO3/CeO2/YSZ as a tri-layer buffer. They present structural and functional properties close to those achieved on perovskite substrates: the bilayers are fully epitaxial with extremely flat surface, and exhibit robust ferromagnetism and ferroelectricity at room temperature., Financial support by the Spanish Government (projects MAT2014-56063-C2-1-R and FIS2013-48668-C2-1-P) and Generalitat de Catalunya (2014 SGR 734) is acknowledged. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). IF acknowledges Beatriu de Pinós postdoctoral scholarship (2011 BP-A 00220 and 2011 BP-A_2 00014) from AGAUR-Generalitat de Catalunya and Juan de la Cierva - Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. MS acknowledges the FPU grant and JG acknowledges RyC contract (2012–11709) from the Spanish Government. Electron microscopy observations carried out at the ICTS-CNME at UCM. Authors acknowledge the ICTS-CNME for offering access to their instruments and expertise. Research at UCM was sponsored by Spanish MINECO MAT2015-66888-C3-3-R and Fundación BBVA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High ferroelectric polarization in c-oriented BaTiO3 epitaxial thin films on SrTiO3/Si(001)

  • Scigaj, Mateusz
  • Chao, C.H.
  • Gázquez, Jaume
  • Fina, Ignasi
  • Herranz, Gervasi
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Scigaj, M. et al., The integration of epitaxial BaTiO3 films on silicon, combining c-orientation, surface flatness, and high ferroelectric polarization is of main interest towards its use in memory devices. This combination of properties has been only achieved so far by using yttria-stabilized zirconia buffer layers. Here, the all-perovskite BaTiO3/LaNiO3/SrTiO3 heterostructure is grown monolithically on Si(001). The BaTiO3 films are epitaxial and c-oriented and present low surface roughness and high remnant ferroelectric polarization around 6 μC/cm2. This result paves the way towards the fabrication of lead-free BaTiO3 ferroelectric memories on silicon platforms., ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2014-56063-C2-1-R project, and from Generalitat de Catalunya (2014 SGR 734). Work at Oak Ridge National Laboratory was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division. C. H. Chao acknowledges the NSC-CSIC 2014 Summer Program in Spain for Taiwanese PhD students. I. Fina acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness of Spanish Government. INL gratefully acknowledges the European commission and the national French research agency (ANR) for funding, through the projects SITOGA (FP7-ICT-2013-11-619456), TIPS (H2020‐ICT‐02-2014‐1-644453), ANR HIRIS and ANR DIAMWAFEL. INL also acknowledges P. Regreny, C. Botella and J.-B. Goure for MBE technical assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth Instabilities as a Source of Surface Chemical Structuration in Functional Perovskite Thin Films

  • López Mir, Laura
  • Balcells Argemi, Lluis
  • Valencia, Sergio
  • Kronast, Florian
  • Martínez Perea, Benjamín
  • Miguel, Juan José de
  • Ocal, Carmen
The spontaneous formation of double chemical terminated surfaces of La0.7Sr0.3MnO3 due to deviations from ideal epitaxial growth during its deposition on SrTiO3(001) is presented. The development of surface regions with differentiated topmost composition leads to outstanding surface nanostructuration presenting notably distinct local properties, particularly in terms of electric transport and local work function. Correlation between combined atomic force microscopy and X-ray photoelectron spectroscopy data allows the chemical identification of the two terminations as corresponding to La0.7Sr0.3O and MnO2. The most likely atomistic process at the origin of the surface organization has been interpreted by Monte Carlo simulations that reveal the importance of stacking fault formation as growth proceeds. We present a physical understanding of the experimental results for surfaces in which different electronic responses coexist. The conclusions of the present work can be extended to the growth of other perovskite thin films, therefore broadening the field of functional materials nanostructuration., This work has been supported by the Spanish Government under projects MAT2013-47869-C4 and MAT2015-71664-R. The ICMAB members acknowledge the Spanish MINECO through the project MAT2015-68994-REDC and the Severo Ochoa Program (SEV-2015-0496), FEDER program and the Generalitat de Catalunya through 2014 SGR 501. L.L.M. thanks the Spanish MINECO for a FPI BES-2013-063424 fellowship. J.J.M. thanks the Centro de Computacioń Cientıfí ca (CCC) of the Universidad Autónoma de Madrid for computing time., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pressure-Induced Conductivity in a Neutral Nonplanar Spin- Localized Radical

  • Souto Salom, Manuel
  • Blasi, Davide
  • Ratera, Immaculada
  • Rovira, Concepció
  • Veciana, Jaume
Souto, Manuel et al., There is a growing interest in the development of single-component molecular conductors based on neutral organic radicals that are mainly formed by delocalized planar radicals, such as phenalenyl or thiazolyl radicals. However, there are no examples of systems based on nonplanar and spin-localized C-centered radicals exhibiting electrical conductivity due to their large Coulomb energy (U) repulsion and narrow electronic bandwidth (W) that give rise to a Mott insulator behavior. Here we present a new type of nonplanar neutral radical conductor attained by linking a tetrathiafulvalene (TTF) donor unit to a neutral polychlorotriphenylmethyl radical (PTM) with the important feature that the TTF unit enhances the overlap between the radical molecules as a consequence of short intermolecular S···S interactions. This system becomes semiconducting upon the application of high pressure thanks to increased electronic bandwidth and charge reorganization opening the way to develop a new family of neutral radical conductors., This work was supported by the EU ITN iSwitch 642196 DGI grant (BeWell; CTQ2013-40480-R), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), and the Generalitat de Catalunya (grant 2014- SGR-17). This work has also been supported by MINECO through the projects CSD2007-00045, CTQ2012- 38599-C02- 02 and CTQ2013-48252-P. ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). M.S. is grateful to Spanish Ministerio de Educación, Cultura y Deporte for a FPU grant and he is enrolled in the Material Science Ph.D. program of UAB. D.B. is grateful to the EC ITN Nano2fun grant no607721. M.P.A. is grateful to the Spanish Ministerio de Educación, Cultura y Deporte for an FPU grant. M.P.A. and V.G.B. thank the project CTQ2015-67755-C2-1-R. H.O. Jeschke, M. Tomic and R. Valenti thank the Deutsche Forschungsgemeinschaft (DFG) for funding through grant SFB/TRR49 and Steve Winter for useful discussions. We thank Carlos Goḿ ez-Garcıá (Univ. Valencia) for SQUID measurements as well as Xavier Fontrodona (Univ. Girona) for X-ray diffraction measurements and Mercedes Taravillo (UCM) for the support provided during the high pressure Raman measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electronic structure of 2H-NbSe2 single-layers in the CDW state

  • Silva-Guillén, José Ángel
  • Ordejón, Pablo
  • Guinea, Francisco
  • Canadell, Enric
Adensity functional theory study of NbSe2 single-layers in the normal non-modulated and the 3×3 CDWstates is reported.Weshow that, in the single layer, theCDWbarely affects the Fermi surface of the system, thus ruling out a nesting mechanism as the driving force for the modulation. TheCDW stabilizes levels lying around 1.35 eV below the Fermi level within the Se-based valence band but having a substantial Nb–Nb bonding character. The absence of interlayer interactions leads to the suppression of the pancake-like portion of the bulk Fermi surface in the single-layer.Weperform scanning tunneling microscopy simulations and find that the images noticeably change with the sign and magnitude of the voltage bias. The atomic corrugation of the Se sublayer induced by the modulation plays a primary role in leading to these images, but the electronic reorganization also has an important contribution. The analysis of the variation of these images with the bias voltage does not support a Fermi surface nesting mechanism for theCDW. It is also shown that underlying graphene layers (present in some of the recent experimental work) do not modify the conduction band, but do affect the shape of the valence band of NbSe2 single-layers. The relevance of these results in understanding recent physical measurements for NbSe2 single-layers is discussed. Introduction Transition metal dichalcogenides are layered materials, easily exfoliable due to the van der Waals forces linking their layers. They have been the focus of large attention in the past few years because they are ideal systems where to study the influence of the reduced electronic screening brought about by lowering the dimensionality from bulk to layers of different thickness. Among them, 2H-NbSe2 (from now on we will refer to it just as NbSe2) is metallic at room temperature, becomes superconducting (SC) at around 7 K [1, 2] and there are strong indications that it is a twogap superconductor [3–7]. Before reaching the SC state it undergoes a charge density wave (CDW) distortion at around 30 K [8, 9]. The bulk structure of NbSe2 is built from hexagonal layers containing Nb atoms in a trigonal prismatic coordination (see figure 1(a)) [10], but there are also relatively short interlayer Se–Se contacts providing a substantial interlayer coupling. Although, This work has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) through the ERC Advanced Grant NOVGRAPHENE (GA 290846). Work in Bellaterra was supported by Spanish MINECO (Grant Nos. FIS2015-64886-C5-3-P and FIS2015-64886-C5-4-P, and the Severo Ochoa Centers of Excellence Program under Grants SEV-2013-0295 and SEV-2015-0496), and Generalitat de Catalunya (2014SGR301). We thank M. Ugeda for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-Driven Orbital and Magnetic Orders and Phase Separation in Epitaxial Half-Doped Manganite Films for Tunneling Devices

  • Pesquera, David
  • Gutiérrez Yatacue, Diego F.
  • Radaelli, Greta
  • Herranz, Gervasi
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
Mixed-valence manganites La1−xAxMnO3 (A=Sr, Ca) with x≈0.5 can be driven from a ferromagnetic-metallic to an antiferromagnetic-insulating state by a small modification (Δx) of the carrier density (Δx/x<1). For this reason, these oxides have received renewed attention due to their potentially advantageous integration in ferroelectric tunnel junctions of adjustable tunnel barrier width. Interestingly, in thin films, epitaxial strain can modify the electronic and magnetic ground state strongly affecting their magnetotransport properties. Here we exploit the extreme sensitivity of linearly and circularly polarized x-ray absorption to orbital anisotropy and magnetic ordering to explore the role of structural distortions and electronic bandwidth on the orbital occupancy and spin ordering of Mn 3d states in La0.5A0.5MnO3 films under various strain states. Mn55 NMR experiments are used to get information about the electronic and magnetic phase separation and orbital ordering occurring in these films. These results combined with the corresponding structural, magnetic, and electrical characterization allow us to map the strain-dependent orbital and magnetic phase diagrams of half-doped manganites and its dependence on the electronic bandwidth., This work is supported by the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2014-56063-C2-1-R project, the Generalitat de Catalunya (2014 SGR 734), the Italian government (MIUR-Progetto Premiale “Materiali e disposivi magnetici e superconduttivi per sensoristica e ICT”), the National Sciences Centre of Poland (Grant No. DEC 2011/03/B/ST3/02368), and the EU Seventh Framework Program [Grant No. REGPOT-CT- 2013–316014 (EAgLE)]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin Hall Magnetoresistance as a Probe for Surface Magnetization in Pt=CoFe2O4 Bilayers

  • Isasa, Miren
  • Vélez, Saül
  • Sagasta, Edurne
  • Bedoya-Pinto, Amilcar
  • Dix, Nico
  • Sánchez Barrera, Florencio
  • Hueso, Luis E.
  • Fontcuberta, Josep
  • Casanova, Félix
We study the spin Hall magnetoresistance (SMR) in Pt grown in situ on CoFe2O4 (CFO) ferrimagnetic insulating films. A careful analysis of the angle-dependent and field-dependent longitudinal magnetoresistance indicates that the SMR contains a contribution that does not follow the bulk magnetization of CFO, but it is a fingerprint of the complex magnetism at the surface of the CFO layer, thus signaling SMR as a tool for mapping surface magnetization. A systematic study of the SMR for different temperatures and CFO thicknesses gives us information impossible to obtain with any standard magnetometry technique. On one hand, the surface magnetization behaves independently of the CFO thickness and does not saturate up to high fields, evidencing that the surface has its own anisotropy. On the other hand, characteristic zero-field magnetization steps are not present at the surface while they are relevant in the bulk, strongly suggesting that antiphase boundaries are responsible for such intriguing features. In addition, a contribution from the ordinary magnetoresistance of Pt is identified, which is distinguishable only due to the low resistivity of the in situ grown Pt., This work is supported by the European Union under the NMP project (263104-HINTS) and the European Research Council (257654-SPINTROS), by the Spanish MINECO (MAT2012-37638, MAT2015-65159-R, MAT2014-56063- C2-1R, and SEV-2015-0496), by the Basque Government (PC2015-1-01), and by the Catalan Government (2014 SGR 734). M. I. and E. S. acknowledge the Basque Government and the Spanish MECD, respectively, for a Ph.D. fellowship (BFI-2011-106 and FPU14/03102). J. F. acknowledges stimulating discussions with Xavier Martí., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conformal oxide nanocoatings on electrodeposited 3D porous Ni films by atomic layer deposition

  • Zhang, J.
  • Coll, Mariona
  • Puig Molina, Teresa
  • Pellicer, Eva
  • Sort, Jordi
A versatile chemical synthesis procedure to obtain Al2O3 and Co2FeO4 nanolayers conformally coating a three-dimensional (3D) porous Ni film is presented. First, porous Ni is grown by hydrogen bubble template-assisted electrodeposition. Subsequently, Al2O3 and Co2FeO4 layers, with thickness ranging from 5 nm to 25 nm, are directly deposited onto the pore walls by atomic layer deposition, while maintaining the porous architecture and magnetic properties of the Ni scaffold. The crystal structure, thickness and distribution of elements within the composite coatings are investigated in detail. The resulting magnetic and wettability properties are assessed. Contact angle tests reveal that 3D porous Ni films become more hydrophilic after coating with Al2O3 or Co2FeO4. From a technological point of view, the obtained composite porous films could be appealing for application in magnetically actuated micro/nano-electromechanical systems (MEMS/NEMS) or bio-MEMS/NEMS, among others., This work has been partially funded by the 2014-SGR-1015 and 2014-SGR-150 projects from the Generalitat de Catalunya, the MAT2014-57960-C3-1-R and MAT2014-51778-C2-1-R projects from the Spanish Ministerio de Economı´a y Competitividad (MINECO) and associated FEDER, and the SPIN-PORICS 2014- Consolidator Grant from the European Research Council (Grant Agreement 648454). J. Z. is grateful to the China Scholarship Council (CSC) for the PhD grant. E. P. and M. C. are grateful to MINECO for the ‘‘Ramon y Cajal’’ contract (RYC-2012-10839, RYC-2013-12448). ICMAB acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Encoding Magnetic States in Monopole-Like Configurations Using Superconducting Dots

  • Palau, Anna
  • Obradors, Xavier
  • Puig Molina, Teresa
Palau Masoliver, Anna et al., A large manifold of nontrivial spin textures, including the stabilization of monopole-like fields, are generated by using a completely new and versatile approach based on the combination of superconductivity and magnetism. Robust, stable, and easily controllable complex spin structures are encoded, modified, and annihilated in a continuous magnetic thin film by defining a variety of magnetic states in superconducting dots., This work has been supported by MINECO (MAT2014-51778-C2-1R, MAT2012-35370, CSD2007-0041), Generalitat de Catalunya (2014- SGR-00753, 2014-SGR-150, 2014-PROD00059), European Seventh Framework Program (FP7/2007-2013) under grant agreement 312284, EU-NMP-LA-2012-280432EUROTAPES project and Cost Action MP1201. A. Sanchez acknowledges a grant from ICREA Academia, funded by the Generalitat de Catalunya. ICMAB acknowledge the Severo Ochoa Center of Excellence mentioned from MINECO. A. Palau and S. Valencia contributed equally to this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

H-Formulation FEM Modeling of the Current Distribution in 2G HTS Tapes and Its Experimental Validation Using Hall Probe Mapping

  • Sotelo, Guilherme Gonçalves
  • Carrera, Miquel
  • Granados, Xavier
One of the most widespread mathematical formulations applied to simulate the electromagnetic phenomena of coated conductor in the recent literature is the H one. However, the only validation of the model has been indirect by using measurements taken from the applications, as measurements of the energy losses in ac fields, forces developed in levitation systems or any other parameter related to a specific application. Direct validation of the calculation requires the observation of the local out of plane magnetic field over the surface of the sample and this is only accessible under magneto-optical observations and, in a larger scale and better dynamic range, by the Hall scanning microscopy. We propose here the experimental validation of the H-formulation by comparing the simulated results with measurements made by a Hall probe mapping in a second generation (2G) tape sample for several DC transported currents at 77 K. The paper presents a methodology to simulate the 2G tape by using only measured data obtained from a sample and its normalized J(B) experimental curves. Some boundary conditions that allow a faster convergence of the problem are investigated. Simulated results of the 2G tape modelled considering only the 1 μm HTS layer were compared with other that represent the most important layers of the coated conductor structure in the calculations. The simulated and measured results present a good agreement, proving that this model can calculate precisely the magnetic field and, hence, the current distribution in HTS samples., The authors would like to thank the Brazilian Agency CNPq for the grant “Science without Borders” and the financial supported given by the European agencies EU (EU FP7-2013-ICT-609029 FORTISSIMO project, EU-FP7 NMP-LA-2012-280432 EUROTAPES project, Eurofusion PPPT-WPMAG 2014 and EU COST ACTIONS MP1201 and MP1014), MINECO (RTC-2014-1740-3) and the financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anion size control of the packing in the metallic versus semiconducting chiral radical cation salts (DM-EDT-TTF)2XF6 (X = P, As, Sb)

  • Pop, Flavia
  • Auban-Senzier, Pascale
  • Canadell, Enric
  • Avarvari, Narcis
Control of the structural type in metallic enantiopure and racemic radical cation salts is achieved through hydrogen bonding interactions between the chiral donor DM-EDT-TTF and the XF6 anions (X = P, As, Sb), determined by the anion size and the chiral information., This work was supported in France by the ANR (Project 09- BLAN-0045-01), the CNRS and the University of Angers. Work in Spain was supported by the Spanish MINECO through Grant FIS2015-64886-C5-4-P and the Severo Ochoa Centers of Excellence Program under Grant SEV-2015-0496. We warmly thank M. Allain (MOLTECH-Anjou, Angers) for valuable technical help with the X-ray analysis., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymorphism and Superconductivity in Bilayer Molecular Metals (CNB-EDT-TTF)4I3

  • Rabaça, Sandra
  • Oliveira, Sandrina
  • Santos, Isabel C.
  • Gama, Vasco
  • Belo, Dulce
  • Lopes, Elsa B.
  • Canadell, Enric
  • Almeida, Manuel
Electrocrystallization from solutions of the dissymmetrical ET derivative cyanobenzene-ethylenedithio-tetrathiafulvalene (CNB-EDT-TTF) in the presence of triiodide I3 − affords two different polymorphs (β″ and κ) with the composition (CNB-EDT-TTF)4I3, both with a bilayer structure of the donors. These polymorphs differ in the packing patterns (β″- and κ-type) of the donor molecules in each layer, in both cases with bifurcated C−N···H interactions effectively coupling head-to-head donor molecules between layer pairs. Two β″ polymorphs can be obtained with different degrees of anionic ordering. In one disordered phase, β″d, with a smaller unit cell, the triiodide anions are disordered over two possible positions in a channel between the donor bilayers, while in the ordered phase, β″o, the triiodide anions occupy only one of those positions in this channel, leading to the doubling of the unit cell in the layer plane. These results for β″ phases contrast with the κ polymorph previously reported, for which weaker disorder of the triiodide anions, over two possible orientations with 94 and 6% occupation factors, was observed. While the β″ polymorphs remains metallic down to 1.5 K with a ρ300K/ρ4K resistivity ratio of 250, the κ polymorph presents a much smaller resistivity ratio in the range of 4−10 and superconductivity with an onset temperature of 3.5 K., This work was partially supported in Portugal by FCT under Contracts UID/Multi/04349/2013 and RECI/QEQ-QIN/ 0189/2012 and grants to S.O. (SFRH/BD/72722/2010) and S.R. (SFRH/BPD/113344/2015). Work in Bellaterra was supported by MINECO-Spain (Grant FIS2015-64886-C5-4- P) and Generalitat de Catalunya (2014SGR301). E.C. acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2015-0496., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Near-Edge X‑ray Absorption Fine Structure Investigation of the Quasi-One-Dimensional Organic Conductor (TMTSF)2PF6

  • Medjanik, K.
  • Chernenkaya, A.
  • Kozina, X.
  • Nepijko, S.A.
  • Öhrwall, G.
  • Foury-Leylekian, Pascale
  • Alemany, Pere
  • Schönhense, G.
  • Canadell, Enric
  • Pouget, Jean-Paul
We present high-resolution near-edge X-ray absorption fine structure (NEXAFS) measurements at the P L2/3-edges, F K-edge, C K-edge and Se M2/3-edges of the quasi-one-dimensional (1D) conductor and superconductor (TMTSF)2PF6. NEXAFS allows probing the donor and acceptor moieties separately; spectra were recorded between room temperature (RT) and 30 K at normal incidence. Spectra taken around RT were also studied as a function of the angle (θ) between the electric field of the X-ray beam and the 1D conducting direction. In contrast with a previous study of the S L2/3-edges spectra in (TMTTF)2AsF6, the Se M2/3-edges of (TMTSF)2PF6 do not exhibit a well resolved spectrum. Surprisingly, the C K-edge spectra contain three well defined peaks exhibiting strong and non-trivial θ and temperature dependence. The nature of these peaks as well as those of the F K-edge spectra could be rationalized on the basis of first-principles DFT calculations. Despite the structural similarity, the NEXAFS spectra of (TMTSF)2PF6 and (TMTTF)2AsF6 exhibit important differences. In contrast with the case of (TMTTF)2AsF6, the F K-edge spectra of (TMTSF)2PF6 do not change with temperature despite stronger donor-anion interactions. All these features reveal subtle differences in the electronic structure of the TMTSF and TMTTF families of salts., Work in Spain was supported by MINECO (Spain) through Grants FIS2012-37549-C05-05, FIS2015-64886-C5-4-P and CTQ2015-64579-C3-3-P, and Generalitat de Catalunya (2014SGR301 and XRQTC). E.C. acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2015-0496. Special thanks are due to Graduate School of Excellence MAINZ and to Transregio SFB TR49. The crystals were synthesized by the late A. Moradpour. We would like to thank to MAX IV laboratory for providing beam time at I1011 beam line., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Orientation symmetry breaking in self-assembled Ce1-xGdxO2-y nanowires derived from chemical solutions

  • Queraltó, Albert
  • Mata, Maria de la
  • Martínez Orellana, Lidia
  • Magén, César
  • Gibert, Marta
  • Arbiol, Jordi
  • Hühne, Ruben
  • Obradors, Xavier
  • Puig Molina, Teresa
Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a high-throughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented CeGdO (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001)CGO[0-11](011)LAO[100] growth orientation, with the enlargement occurring along the [0-11]CGO direction with (111) lateral facets. The chosen substrate allowed us to study a unique case where the resulting biaxial strain is isotropic, while the dissimilar lateral surface energies are the key factor to obtain an energetically imbalanced and non-degenerated nanowire configuration. Rapid Thermal Annealing (RTA) has allowed sorting of experimental nucleation from coarsening and analysis of the kinetic phenomena of the nanowires. A thermodynamic driving force is shown to exist for a continuous elongation of the nanowires while the coarsening rates are found to be strongly temperature dependent and so kinetic effects are the key factors to control the size and density of the self-organized nanowire system. A remarkably fast nanowire growth rate (14-40 nm min) is observed, which we associate with a high atomic mobility probably linked to a high concentration of oxygen vacancies, as detected by XPS. These nanowires are envisaged as model systems pushing forward the study of low energetic and highly oxygen deficient {111} lateral facets useful for catalysis, gas sensors and ionic conductivity applications., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2013-0295 and SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund), and the projects MAT2011-28874-C02-01, ENE2014-56109-C3-3-R and Consolider Nanoselect (CSD2007-00041), and from the Catalan Government (2014-SGR-753, 2014-SGR-1638 and Xarmae). AQ and MdlM are also grateful for JAE-Predoc fellowship from CSIC (E-08-2012-1321248 and E-08-2013-1028356, co-financed by the European Social Fund). Authors also thank the INA-LMA facilities for the use of the advanced (S)TEM equipment., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Melting temperature of YBa2Cu3O7-x and GdBa2Cu3O7-x at subatmospheric partial pressure

  • Taïr, Fadila
  • Carreras, Laura
  • Camps, Jaume
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Calleja Lázaro, Alberto
  • Puig Molina, Teresa
  • Obradors, Xavier
The melting temperature, Tm, of YBa2Cu3O7 x and GdBa2Cu3O7 x superconductor ceramic compounds has been measured by differential thermal analysis (DTA) over a large oxygen partial pressure range of five orders of magnitude (2$10 5 < PO2 < 1 bar). It is shown that the DTA peak and endset temperatures are closer to Tm than the onset temperature. Correct measurement of Tm requires low heating rates and subatmospheric pressure conditions to avoid temperature shifts due to local oxygen overpressure and kinetic effects., This work was funded by the Spanish Programa Nacional de Materiales through projects MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R. We also acknowledge: the Center of Excellence award Severo Ochoa SEV-2015-0496, SGR753 and SGR948 from the Generalitat of Catalunya and European Union through projects Eurotapes (EU-FP7 NMP-LA-2012-280432) and Ultrasupertape (ERC ADG-2014-669504). FT acknowledges financial support from USTO. The authors are indebted to Dr. Joan Pere López Olmedo and Dr. Xavier Fontrodona of STR, University of Girona, for their technical assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unique nanostructural features in Fe, Mndoped YBCO thin films

  • Meledin, A.
  • Turner, S.
  • Cayado, Pablo
  • Mundet, Bernat
  • Solano, Eduardo
  • Ricart, Susagna
  • Ros, Josep
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Tendeloo, Gustaaf van
An attempt to grow a thin epitaxial composite film of YBa2Cu3O7-δ (YBCO) with spinel MnFe2O4 (MFO) nanoparticles on a LAO substrate using the CSD approach resulted in a decomposition of the spinel and various doping modes of YBCO with the Fe and Mn cations. These nanostructural effects lead to a lowering of Tc and a slight Jc increase in field. Using a combination of advanced transmission electron microscopy (TEM) techniques such as atomic resolution high-angle annular dark field scanning transmission electron microscopy, energy dispersive X-ray spectroscopy and electron energy-loss spectroscopy we have been able to decipher and characterize the effects of the Fe and Mn doping on the film architecture. The YBaCuFeO5 anion-deficient double perovskite phase was detected in the form of 3D inclusions as well as epitaxially grown lamellas within the YBCO matrix. These nano-inclusions play a positive role as pinning centers responsible for the Jc/Jsf (H) dependency smoothening at high magnetic fields in the YBCO-MFO films with respect to the pristine YBCO films., The authors gratefully acknowledge Prof. Dr. A. Abakumov and Dr. J. Gazquez for discussions and corrections. Part of this work was performed within the framework of the EUROTAPES project (FP7-NMP.2011.2.2-1 Grant no. 280432), funded by the European Union. ICMAB research was financed by the Ministry of Economy and Competitiveness, and FEDER funds under the projects MAT2011-28874-C02-01, MAT2014-51778-C2-1-R, ENE2014-56109-C3-3-R and Consolider Nanoselect CSD2007-00041, and by Generalitat de Catalunya (2009 SGR 770, 2015 SGR 753 and Xarmae). ICMAB acknowledges support from Severo Ochoa Program (MINECO, Grant SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Redox-Active Metallacarborane-Decorated Octasilsesquioxanes. Electrochemical and Thermal Properties

  • Cabrera-González, Justo
  • Sánchez Arderiu, Víctor
  • Viñas, Clara
  • Parella, Teodor
  • Teixidor, Francesc
  • Núñez Aguilera, Rosario
Polyanionic and electroactive hybrids based on octasilsesquioxanes bearing metallacarborane units are developed. They show remarkable solubility in organic solvents and outstanding thermal stability. The metallacarboranes act as independent units simultaneously undergoing the reversible redox process., We acknowledge support by MINECO [Grants CTQ2013- 44670-R, CTQ2012-32436, and CTQ2015-64436-P and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496)] and Generalitat de Catalunya (Grant 2014/ SGR/149). J.C.-G. thanks to the CSIC for an intramural grant. V.S.-A. thanks MICINN (Grant CTQ2010-16237) for the FPI grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Donor/Acceptor Mixed Self-Assembled Monolayers for Realising a Multi-Redox-State Surface

  • Casado Montenegro, Javier
  • Marchante, Elena
  • Crivillers, Núria
  • Rovira, Concepció
  • Mas Torrent, Marta
Mixed molecular self-assembled monolayers (SAMs) on gold, based on two types of electroactive molecules, that is, electron-donor (ferrocene) and electron-acceptor (anthraquinone) molecules, are prepared as an approach to realise surfaces exhibiting multiple accessible redox states. The SAMs are investigated in different electrolyte media. The nature of these media has a strong impact on the types of redox processes that take place and on the redox potentials. Under optimised conditions, surfaces with three redox states are achieved. Such states are accessible in a relatively narrow potential window in which the SAMs on gold are stable. This communication elucidates the key challenges in fabricating bicomponent SAMs as electrochemical switches., We acknowledge the financial support of the EU projects ERC StG 2012-306826 e-GAMES, ITN iSwitch (GA no. 642196) CIG (PCIG10- GA-2011-303989), ACMOL (GA no. 618082), the Networking Research Center of Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), the DGI (Spain) with project BE-WELL CTQ2013- 40480-R and the Generalitat de Catalunya with project 2014- SGR-17. The authors also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). N.C acknowledges the RyC Program. J.C-M. and E.M. are enrolled in the Materials Science PhD program of UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carborane-stilbene dyads: influence of substituents and cluster isomers on the photoluminescence properties

  • Ferrer-Ugalde, Albert
  • Cabrera-González, Justo
  • Juárez-Pérez, Emilio J.
  • Teixidor, Francesc
  • Pérez-Inestrosa, Ezequiel
  • Montenegro, José María
  • Sillanpää, Reijo
  • Haukka, Matti
  • Núñez Aguilera, Rosario
Two novel styrene-containing meta-carborane derivatives substituted at the second carbon cluster atom (Cc) with either a methyl (Me), or a phenyl (Ph) group, are introduced herein alongside with a new set of stilbene-containing ortho- (o-) and meta- (m-) carborane dyads. The latter set of compounds has been prepared from styrenecontaining carborane derivatives via Heck coupling reaction. High regioselectivity has been achieved for these compounds by using a combination of palladium complexes [Pd2(dba)3]/[Pd(t-Bu3P)2] as a catalytic system, yielding exclusively E isomers. All compounds have been fully characterized and the crystal structures of seven of them analyzed by X-ray diffraction. The absorption spectra of these compounds are similar to those of their respective fluorophore groups (styrene or stilbene), showing very low influence of the substituent (Me or Ph) linked to the second Cc atom or the cluster isomer (o- or m-). On the other hand, fluorescence spectroscopy revealed high emission intensities for Me-o-carborane derivatives, whereas their Ph-o-carborane analogues evidenced an almost total lack of fluorescence, confirming the significant role of the substituent bound to the adjacent Cc in o-carboranes. In contrast, all the m-carborane derivatives display similar photoluminescence (PL) behavior regardless of the substituent attached to the second Cc, demonstrating its small influence on the emission properties. Additionally, m-carborane derivatives are significantly more fluorescent than their o- counterparts, reaching quantum yield values as high as 30.2%. Regarding the solid state emission, only stilbene-containing Ph-o-carborane derivatives, which showed very low fluorescence in solution, exhibited a notable PL emission in films attributed to the aggregation-induced emission. DFT calculations were performed to successfully complement the photoluminescence studies, supporting the experimentally observed photophysical behavior of the styrene and stilbene-containing carborane derivatives. In conclusion, in this work is proved that it is possible to tailor the PL properties of the carborane-stilbene dyads by changing the Cc substituent and the carborane isomer., This work has been supported by Ministerio de Economía y Competitividad, MINECO, (CTQ2013-44670-R and CTQ2013-41339-P), and Generalitat de Catalunya (2014/SGR/149). Theoretical calculations have been achieved using computers from the Centro Técnico de Informática del Consejo Superior de Investigaciones Ciéntificas (CTI-CSIC). ICMAB acknowledges financial support from the MINECO, through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV- 2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coming across a novel copper oxide 2D framework during the oxidation of Cu(111)

  • Matencio, Sonia
  • Barrena, Esther
  • Ocal, Carmen
Two dimensional copper oxides obtained on Cu(111) by air-enriched argon sputtering plus annealing have been measured at room temperature by means of scanning tunneling microscopy (STM) and atomic force microscopy (AFM) under ultra-high vacuum (UHV) conditions. Depending on the oxygen content different oxide frameworks and diverse stoichiometric metal/oxide interfaces exist. In particular, we report on a novel open honeycomb structure with a large unit cell which is modeled as a two dimensional network made out of Cu3O units. This lattice coexists with other oxide structures richer in oxygen and is suggested to develop towards these denser phases by oxygen incorporation., This work has been supported by the Spanish Government under project MAT2013-47869-C4-1-P and the Generalitat de Catalunya 2014 SGR501. We acknowledge the specific agreement between ICMAB-CSIC and the Synchrotron Light Facility ALBA and the Spanish MINECO through the project MAT2015- 68994-REDC and the ‘‘Severo Ochoa’’ Program for Centers of Excellence in R&D (SEV-2015-0496). We thank G. Sauthier for XPS measurements and Ll. Gines for equipment UHV support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Narrowing the zero-field tunneling resonance by decreasing the crystal symmetry of Mn12 acetate

  • Espín, Jordi
  • Zarzuela, R.
  • Maspoch, Daniel
  • Imaz, Inhar
  • Chudnovsky, E. M.
  • Tejada, Javier
We report the discovery of a less symmetric crystalline phase of Mn acetate, a triclinic phase, resulting from recrystallizing the original tetragonal phase reported by Lis in acetonitrile and toluene. This new phase exhibits the same structure of Mn acetate clusters and the same positions of tunneling resonances on the magnetic field as the conventional tetragonal phase. However, the width of the zero-field resonance is at least 1 order of magnitude smaller - can be as low as 50 Oe - indicating very small inhomogeneous broadening due to dipolar and nuclear fields., The work at the University of Barcelona has been supported by MINECO Project MAT2011-23698. J.E. thanks the MINECO for a FPI fellowship. The work of E.M.C was supported by the U.S. National Science Foundation; grant DMR-1161571. ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program; grants SEV-2015-0496 and SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Potassium Salts as Electrolyte Additives in Lithium-Oxygen Batteries

  • Landa, Imanol
  • Olivares, Mara
  • Bergner, Benjamin
  • Pinedo, Ricardo
  • Sorrentino, Andrea
  • Pereiro, Eva
  • Ruiz de Larramendi, Idoia
  • Janek, Jürgen
  • Rojo, Teófilo
  • Tonti, Dino
The stabilization of the intermediates formed during oxygen reduction reaction and their efficient solubilization and diffusion is a crucial issue that needs to be improved in non-aqueous lithium oxygen batteries. By adding 0.1 M K+ (as KOTf salt) to the electrolyte we have observed remarkable improvements in the rate capability of the discharge process. The K+ cation facilitates a more homogeneous discharge product deposition in the porous cathode. Instead, as evidenced by synchrotron measurements, we find that K+ does not influence the cell chemistry, suggesting that it rather assists the superoxide solvation, thus enhancing the solution-based growth of the discharge products. In addition, if iodide (I-) is added as redox mediator we find an extended cycle life when K+ instead of Li+ is used as cation. This finding remarks the benefits of stabilizing the oxygen reduction products in the electrolyte leading to a solution-based mechanism., This work has been partially financed by the Spanish Ministry of Economy, Industry and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496), through projects MAT2013-41128-R, MAT2016-78266-P, MAT2015-68394-R, by the “Fondo Europeo de Desarrollo Regional” (FEDER), by the Eusko Jaurlaritza/Gobierno Vasco (through project IT-570-13), and by the Generalitat de Catalunya (grant 2014 SGR 1505). I. Landa-Medrano thanks the Universidad del País Vasco (UPV/EHU) for his predoctoral fellowship. M. Olivares-Marín acknowledges CSIC for a JAE-DOC research contract co-funded by the European Social Fund. J. Janek acknowledges financial support by BMBF (Federal Ministry of Education and Research) within the project BENCHBATT. The xray microscopy experiments were performed at MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carborane bis-pyridylalcohols as linkers for coordination polymers: Synthesis, crystal structures, and guest-framework dependent mechanical properties

  • Tsang, Min Ying
  • Rodríguez-Hermida, Sabina
  • Stylianou, Kyriakos C.
  • Tan, Fangchang
  • Negi, Divya
  • Teixidor, Francesc
  • Viñas, Clara
  • Choquesillo-Lazarte, Duane
  • Verdugo-Escamilla, Cristóbal
  • Guerrero, Miguel
  • Sort, Jordi
  • Juanhuix, Jordi
  • Maspoch, Daniel
  • Giner Planas, José
We report the synthesis and characterization of six novel coordination polymers (CPs) based on M(II) (M: Zn and Co), di-, tri-, and tetracarboxylate linkers and two novel bis-pyridylalcohol 1,7-bis{(pyridin-n′-yl)methanol}-1,7-dicarba-closo-dodecaboranes (n′ = 3, L1; n′ = 4, L2) ligands. The polycarboxylates are terephthalic acid (H2BDC), 1,3,5-benzenetricarboxylic acid (H3BTB), and 1,2,4,5-tetrakis(4-carboxyphenyl)benzene (H4TCPB). Structural description of CPs reveals the flexibility of the carborane ligands and their ability to construct extended structures. The CP containing Co(II), BTB, and L2 behaves as a crystalline sponge for a variety of guests, showing a higher affinity for aromatic guest molecules. Single-crystal nanoindentation experiments indicate that a high number of specific interactions between the guests and the CP framework result in a high elastic modulus and hardness values., This work was supported by the EU FP7 ERC-Co 615954. M.Y.T., T.F., F.T., C.V. and J.G.P. acknowledge MEC grants CTQ2013-44670-R and the Generalitat de Catalunya (2014/ SGR/149) for financial support. J.S. thanks the Generalitat de Catalunya 2014/SGR/1015 for financial support and MAT2014-57960-C3-1-R for partial financial support and associated FEDER is acknowledged. The Intramural CSIC (201530E011) provided X-ray structural facilities for this work. ICMAB and ICN2 acknowledge the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program, under Grants SEV-2015-0496 and SEV-2013-0295. F.T. is enrolled in the UAB Ph.D. program and acknowledges the China Scholarship Council (CSC) for her Ph.D. grant (201506060171)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemically Active Thin Carbon Films with Enhanced Adhesion to Silicon Substrates

  • Pengfei, Niu
  • Asturias-Arribas, Laura
  • Gich, Martí
  • Fernández Sánchez, César
  • Roig Serra, Anna
Thin carbon films deposited on technologically relevant substrates, such as silicon wafers, can be easily implemented in miniaturized electrochemical devices and used for sensing applications. However, a major issue in most carbon films is the weak film/substrate adhesion that shortens the working device lifetime. This paper describes the facile preparation of robust thin carbon films on silicon substrates by one-pot sol-gel synthesis. The improved adherence of these carbon films is based on the incorporation of silica through the controlled synthesis of a resorcinol/formaldehyde gel modified with aminopropyltriethoxysilane. The films demonstrate excellent adhesion to the silicon substrate, good homogeneity, excellent electrical conductivity and superior electrochemical performance. Moreover, this approach opens the door to the fabrication of carbon thin-film electrodes by photolithographic techniques., G. Antorrena from the Laboratorio de Microscopias Avanzadas of the Instituto de Nanociencia de Aragón is acknowledged for performing XPS analysis. This research was partially funded by, the European Union’s 7th Framework Programme (FP7/2007-2013) under grant agreement number 614155, the Spanish Ministry of Economy and Competitiveness in cofounding with the European Social Funds through the MAT2012-35324 project, the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496) and the Generalitat de Catalunya (2014SGR213, 2014SGR1645). The Chinese Scholarship Council fellowship (201206240033) to P.N. and the COST Action MP1202 are also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-identity and fate of albumin-coated SPIONs evaluated in cells and by the C. elegans model

  • Si-Ming, Yu
  • González Moragas, Laura
  • Milla, María
  • Kolovou, Androniki
  • Santarella-Mellwig, Rachel
  • Schwab, Yannick
  • Laromaine, Anna
  • Roig Serra, Anna
Nanoparticles which surface adsorb proteins in an uncontrolled and non-reproducible manner will have limited uses as nanomedicinal products. A promising approach to avoid nanoparticle non-specific interactions with proteins is to design bio-hybrids by purposely pre-forming a protein corona around the inorganic cores. Here, we investigate, in vitro and in vivo, the newly acquired bio-identity of superparamagnetic iron oxide nanoparticles (SPIONs) upon their functionalization with a pre-formed and well-defined bovine serum albumin (BSA) corona. Cellular uptake, intracellular particle distribution and cytotoxicity were studied in two cell lines: adherent and non-adherent cells. BSA decreases nanoparticle internalization in both cell lines and protects the iron core once they have been internalized. The physiological response to the nanoparticles is then in vivo evaluated by oral administration to Caenorhabditis elegans, which was selected as a model of a functional intestinal barrier. Nanoparticle biodistribution, at single particle resolution, is studied by transmission electron microscopy. The analysis reveals that the acidic intestinal environment partially digests uncoated SPIONs but does not affect BSA-coated ones. It also discloses that some particles could enter the nematode's enterocytes, likely by endocytosis which is a different pathway than the one described for the worm nutrients. Statement of Significance Unravelling meaningful relationships between the physiological impact of engineered nanoparticles and their synthetic and biological identity is of vital importance when considering nanoparticles biomedical uses and when establishing their nanotoxicological profile. This study contributes to better comprehend the inorganic nanoparticles’ behavior in real biological milieus. We synthesized a controlled pre-formed BSA protein corona on SPIONs to lower unspecific cell uptake and decrease nanoparticle fouling with other proteins. Such findings may be of relevance considering clinical translation and regulatory issues of inorganic nanoparticles. Moreover, we have advanced in the validation of C. elegans as a simple animal model for assessing biological responses of engineering nanomaterials. The physiological response of BSA coated SPIONs was evaluated in vivo after their oral administration to C. elegans. Analyzing ultra-thin cross-sections of the worms by TEM with single-particle precision, we could track NP biodistribution along the digestive tract and determine unambiguously their translocation through biological barriers and cell membranes., This research was partially funded by the Spanish Ministry of Economy (MAT2015-64442-R, Ramon y Cajal program (AL, RyC-2010-06082), FPU program (LGM, FPU12/05549), Severo Ochoa Program (SEV-2015-0496) co-funded by European Social Funds), the Generalitat de Catalunya (2014SGR213), People Program of the European Commission (grant agreement no. 303630, co-funded by the European Social Fund), a Chinese Scholarship Council fellowship (SMY, 201206150053), the Christian Boulin fellowship 2015 from EMBL (LGM), the COST Actions HINT (Action No. MP1202), and GENIE (Action No. BM1408-A). We thank Lorenzo Albertazzi (IBEC, Spain) for the critical reading of the manuscript., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrolyte-Gated Organic Field-Effect Transistor Based on a Solution Sheared Organic Semiconductor Blend

  • Leonardi, Francesca
  • Casalini, Stefano
  • Qiaoming, Zhang
  • Galindo, Sergi
  • Gutiérrez Yatacue, Diego F.
  • Mas Torrent, Marta
descripción no proporcionada por scopus, The authors thank the ERC StG 2012-306826 e-GAMES project, the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), the DGI (Spain) project BE-WELL CTQ2013-40480-R, the Generalitat de Catalunya (2014-SGR-17) and the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa‘ Programme for Centres of Excellence in R&D (SEV- 2015-0496). F.L. gratefully acknowledges the “Juan de la Cierva” programme. The research leading to these results has received funding from the People Programme (Marie Curie Actions) of the Seventh Framework Programme of the European Union (FP7/2007-2013) under REA grant agreement no.600388 (TECNIOSpring programme), and from the Agency for Business Competitiveness of the Government of Catalonia, ACCIÓ. Q. Z. acknowledges the China Scholarship Council, the National Natural Science Foundation (NSF) of China (11404266) and the Fundamental Research Funds for the Central Universities (Grant No. XDJK2011C041). Q. Z. is enrolled in the Materials Science PhD Program of Universitat Autònoma de Barcelona. The authors gratefully acknowledge Prof. J. Puigdollers for the useful discussions, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gold nanotriangles decorated with superparamagnetic iron oxide nanoparticles: A compositional and microstructural study

  • Hachtel, Jordan Adam.
  • Si-Ming, Yu
  • Lupini, Andrew R.
  • Pantelides, Sokrates T.
  • Gich, Martí
  • Laromaine, Anna
  • Roig Serra, Anna
The combination of iron oxide and gold in a single nanoparticle results in both magnetic and plasmonic properties that can stimulate novel applications in bio-sensing, medical imaging, or therapeutics. Microwave assisted heating allows the fabrication of multi-component, multi-functional nanostructures by promoting selective heating at desired sites. Recently, we reported a microwave-assisted polyol route yielding gold nanotriangles decorated with iron oxide nanoparticles. Here, we present an in-depth microstructural and compositional characterization of the system using scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS). A method to remove the iron oxide nanoparticles from the gold nanocrystals and some insights on crystal nucleation and growth mechanisms are also provided., This research was partially funded by the Spanish Ministry of Economy and Competitiveness in co-funding with European Social Funds through the MAT2012-35324 project, the Severo Ochoa Programme for Centers of Excellence in R&D (SEV-2015- 0496) and the Ramón y Cajal program (AL, RyC-2010-06082) and the Generalitat de Catalunya (2014SGR213). Authors also acknowledge support of the Chinese Scholarship Council (SMY, 201206150053) and the following projects: COST Action MP1202, and the U.S. Department of Energy grant DE-FG02- 09ER46554 (JAH, STP). Work at Oak Ridge National Laboratory was supported by the Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anticipating hyperthermia efficiency of magnetic colloids by a semi-empirical model: a tool to help medical decisions

  • Fernández van Raap, Marcela B.
  • Coral, Diego Fernando
  • Si-Ming, Yu
  • Muñoz, Guillermo Arturo
  • Sánchez, Francisco
  • Roig Serra, Anna
Magnetic hyperthermia, a modality that uses radio frequency heating assisted with single-domain magnetic nanoparticles, is becoming established as a powerful oncological therapy. Much improvement in nanomateriales development, to enhance their heating efficiency by tuning the magnetic colloids properties, has been achieved. However, methodological standardization to accurately and univocally determine the colloids properties required to numerically reproduce specific heating efficiency using analytical expressions still holds. Thus, anticipating the hyperthermic performances of magnetic colloids entails high complexity due to polydispersity, aggregation and dipolar interaction always present in real materials to a more or lesser degree. Here, by numerically simulating experimental results and using real biomedical aqueous colloids, we analyse and compared several approaches to reproduce experimental specific absorption rate values. Then, we show that relaxation time, determined using a representative mean activation energy consistently derived from four independent experiments accurately reproduces experimental heating efficiencies. Moreover, the so-derived relaxation time can be used to extrapolate the heating performance of the magnetic nanoparticles to other field conditions within the framework of the linear response theory. We thus present a practical tool that may truly aid the design of medical decisions., This research was funded by CONICET (PIP 0720) and UNLP-X11/680 grants of Argentina and also partially funded by the Spanish Ministry of Economy (MAT2015-64442-R andSEV-2015-0496 projects, co-funded with European Social Funds) and the Generalitat de Catalunya (2014SGR213). We thank V. Lassalle for providing multicore nanoparticles, E. de Sousa for synthesizing uncoated nanoparticle and D. Muraca TEM data acquisition at Brazilian Nanotechnology National Laboratory (LNNano), Centro Nacional de Pesquisa em Energia e Materiais (CNPEM), Brazil under the Project No. TEM-MSC-14825., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrafast epitaxial growth kinetics in functional oxide thin films grown by pulsed laser annealing of chemical solutions

  • Queraltó, Albert
  • Pérez del Pino, Ángel
  • Mata, Maria de la
  • Arbiol, Jordi
  • Tristany, Mar
  • Obradors, Xavier
  • Puig Molina, Teresa
The crystallization process and physical properties of different functional oxide thin films (CeZrO, LaNiO, BaSrTiO, and LaSrMnO) on single crystal substrates (YO:ZrO, LaAlO, and SrTiO) are studied by pulsed laser annealing (PLA). A Nd:YAG laser source (λ = 266 nm, 10 Hz and τ ∼3 ns) is employed to crystallize chemical solution deposited (CSD) amorphous/nanocrystalline films under atmospheric conditions. We provide new insight on the influence of photochemical and photothermal interactions on the epitaxial crystallization kinetics of oxide thin films during the transformation from amorphous/polycrystalline material (i.e., atomic diffusion, epitaxial growth rates, and activation energies of nucleation and crystallization). The epitaxial growth is investigated by varying the laser fluence and the applied number of pulses. The morphology, structure, and epitaxial evolution of films are evaluated by means of atomic force and transmission electron microscopies and X-ray diffraction. Highly epitaxial oriented films of 20-40 nm in thickness are obtained by PLA. The crystallization kinetics of laser treatments is determined to be orders of magnitude faster than thermal treatments with similar activation energies (1.5-4.1 eV), mainly due to the large temperature gradients inducing modified atomic diffusion mechanisms derived mainly from photothermal interactions, as well as a minor contribution of photochemical effects. The fast heating rates achieved by PLA also contribute to the fast epitaxial growth due to reduced coarsening of polycrystalline material. The measurement of the physical properties (electrical resistivity and magnetism) of laser processed CSD films has revealed significantly good functionalities, close to those of thermally grown films, but with much shorter processing times., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2013-0295 and SEV-2015- 0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund), and the projects MAT2011-28874-C02-01, ENE2014-56109-C3-3-R and Consolider Nanoselect CSD2007-00041, and from the Catalan Government with 2014-SGR-753, 2014-SGR-1638 and Xarmae. AQ and MdlM are also grateful to CSIC and European Social Fund program for JAE-Predoc fellowships (E-08-2012-1321248 and E-08-2013-1028356)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disentangling epitaxial growth mechanisms of solution derived functional oxide thin films

  • Queraltó, Albert
  • Mata, Maria de la
  • Arbiol, Jordi
  • Obradors, Xavier
  • Puig Molina, Teresa
This study investigates the mechanisms of epitaxial development and functional properties of oxide thin films (Ce0.9Zr0.1O2−y, LaNiO3, and Ba0.8Sr0.2TiO3) grown on single crystal substrates (Y2O3:ZrO2, LaAlO3, and SrTiO3) by the chemical solution deposition approach. Rapid thermal annealing furnaces are very powerful tools in this study providing valuable information of the early stages of nucleation, the kinetics of epitaxial film growth, and the coarsening of nanocrystalline phases. Advanced transmission electron microscopies, X-ray diffraction, and atomic force microscopy are employed to investigate the film microstructure and morphology, microstrain relaxation, and epitaxial crystallization. This study demonstrates that the isothermal evolution toward epitaxial film growth follows a self-limited process driven by atomic diffusion, and surface and interface energy minimization. All investigated oxides experience a transformation from the polycrystalline to the epitaxial phase. This study unequivocally evidences that the film thickness highly influences the epitaxial crystallization rate due to the competition between heterogeneous and homogeneous nucleation barriers and the fast coarsening of polycrystalline grains as compared to epitaxial growth. The investigated films possess good functional properties, and this study successfully confirms an improvement at long annealing times that can be correlated with grain boundary healing processes. Thick epitaxial films can be crystallized by growing sequential individual epitaxial layers., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-56063-C2-1-R, co-financed by the European Regional Development Fund), and the projects MAT2011-28874-C02-01, ENE2014-56109-C3-3-R and Consolider Nanoselect (CSD2007-00041), and from the Catalan Government (2014-SGR-753 and Xarmae). AQ and MdlM are also grateful for JAE-Predoc fellowship from CSIC (E-08-2012-1321248 and E-08-2013-1028356, co-financed by the European Social Fund)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the effect of unintentional doping on transport optimization and analysis in efficient organic bulk-heterojunction solar cells

  • Deledalle, Florent
  • Kirchartz, Thomas
  • Vezie, Michelle S.
  • Campoy Quiles, Mariano
  • Tuladhar, Pabitra S.
  • Nelson, Jenny
  • Durrant, James R.
In this paper, we provide experimental evidence of the effects of unintentional p-type doping on the performance and the apparent recombination dynamics of bulk-heterojunction solar cells. By supporting these experimental observations with drift-diffusion simulations on two batches of the same efficient polymer-fullerene solar cells with substantially different doping levels and at different thicknesses, we investigate the way the presence of doping affects the interpretation of optoelectronic measurements of recombination and charge transport in organic solar cells. We also present experimental evidence on how unintentional doping can lead to excessively high apparent reaction orders. Our work suggests first that the knowledge of the level of dopants is essential in the studies of recombination dynamics and carrier transport and that unintentional doping levels need to be reduced below approximately 7 × 1015 cm-3 for full optimization around the second interference maximum of highly efficient polymer-fullerene solar cells., F. D. and J. R. D. are thankful of the support from the EPSRC APEX Grant No. EP/H040218/2 and SPECIFIC Grant No. EP/1019278. T. K. acknowledges funding by an Imperial College Junior Research Fellowship. We are grateful to the Ministerio de Economa y Competitividad for funding through the project PHOTOCOMB, Reference No. MAT2012-37776., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring different doping mechanisms in thermoelectric polymer/ carbon nanotube composites

  • Dörling, Bernhard
  • Sandoval, Stefania
  • Kankla, Pacharapon
  • Fuertes, Amparo
  • Tobias, Gerard
  • Campoy Quiles, Mariano
This work compares various methods to prepare polymer/carbon nanotube (CNT) composites for thermoelectric applications, focusing on the different doping mechanisms. We first look at the general trends observed in the Seebeck coefficient and power factor for a large number of composites as a function of electrical conductivity. Then we discuss two methods of nitrogen doping the carbon nanotubes in these composites, namely either during synthesis, or afterwards by ammonolysis. Finally, we discuss doping of the carbon nanotubes through charge transfer from the polymer counterpart, including photo-induced switching of the majority carrier type. As a general remark, we note that processability is negatively influenced by some doping procedures. Best results were achieved for unfunctionalized single-walled carbon nanotubes with a high content of semiconducting CNT species., The authors would like to thank Prof. Michael L. Chabinyc, Prof. Christian Müller and Prof. Alejandro R. Goñi for useful discussions. We are grateful to John D. Craddock, Prof. Matthew C. Weisen- berger and Prof. John E. Anthony for providing the n-MWCNTs. The authors would also like to acknowledge financial support from the Ministerio de Economía y Competitividad of Spain through projects CSD2010–00044 (Consolider NANOTHERM), MAT2015- 70850-P and MAT2014-53500-R; and the European Research Council (ERC) under grant agreement no. 648901. S. Sandoval acknowledges a contract though PIE 201660E013 and P. Kankla the Development and Promotion of Science and Technology Talents Project (DPST). We are grateful to Thomas Swan Co. Ltd for supplying Elicarb1 SWCNTs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Covalent Modification of Highly Ordered Pyrolytic Graphite withaStable OrganicFree Radical by UsingDiazonium Chemistry

  • Seber, Gonca
  • Rudnev, Alexander V.
  • Droghetti, Andrea
  • Rungger, Ivan
  • Veciana, Jaume
  • Mas Torrent, Marta
  • Rovira, Concepció
  • Crivillers, Núria
A novel, persistent, electrochemically active perchlorinated triphenylmethyl (PTM) radical with a diazonium functionality has been covalently attached to highly ordered pyrolytic graphite (HOPG) by electrografting in a single-step process. Electrochemical scanning tunneling microscopy (EC-STM) and Raman spectroscopy measurements revealed that PTM molecules had a higher tendency to covalently react at the HOPG step edges. The cross-section profiles from EC-STM images showed that there was current enhancement at the functionalized areas, which could be explained by redox-mediated electron tunneling through surface-confined redox-active molecules. Cyclic voltammetry clearly demonstrated that the intrinsic properties of the organic radical were preserved upon grafting and DFT calculations also revealed that the magnetic character of the PTM radical was preserved., We acknowledgeGuillaume Sauthier from the Ca talan Ins tituteof Nanoscience and Nanotechnology (ICN2) for XPS measure-ments.This work was supported by ACMOL (GA no. 618082),the Swiss National Science Foundation (grant no. 200020-144471), ERC StG 2012-306826 e-GAMES,ITN iSwitch (642196)project, the Networking Research Center of Bioengineering,Biomaterials and Nanomedicine(CIBER-BBN), the DGI (Spain)with project BE-WELL CTQ2013-40480-R, and the Generalitatde Catalunya with project 2014-SGR-17. N.C acknowledges theRyC program. We also acknowledge financial suppo rt from theSpanishMinistry of Economyand Competitiveness, throughthe “Severo Ochoa” Programme for Centres of Excellence inR&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-arranged misfit dislocation network formation upon strain release in La0.7Sr0.3MnO3/LaAlO3(100) epitaxial films under compressive strain

  • Santiso, José
  • Roqueta, Jaume
  • Bagués, Núria
  • Frontera, Carlos
  • Konstantinović, Z.
  • Martínez Perea, Benjamín
  • Pomar, Alberto
  • Balcells, Lluis
  • Sandiumenge, Felip
Santiso, José et al., Lattice-mismatched epitaxial films of LaSrMnO (LSMO) on LaAlO (001) substrates develop a crossed pattern of misfit dislocations above a critical thickness of 2.5 nm. Upon film thickness increases, the dislocation density progressively increases, and the dislocation spacing distribution becomes narrower. At a film thickness of 7.0 nm, the misfit dislocation density is close to the saturation for full relaxation. The misfit dislocation arrangement produces a 2D lateral periodic structure modulation (Λ≈ 16 nm) alternating two differentiated phases: one phase fully coherent with the substrate and a fully relaxed phase. This modulation is confined to the interface region between film and substrate. This phase separation is clearly identified by X-ray diffraction and further proven in the macroscopic resistivity measurements as a combination of two transition temperatures (with low and high T). Films thicker than 7.0 nm show progressive relaxation, and their macroscopic resistivity becomes similar than that of the bulk material. Therefore, this study identifies the growth conditions and thickness ranges that facilitate the formation of laterally modulated nanocomposites with functional properties notably different from those of fully coherent or fully relaxed material., This research was funded by the Spanish MINECO (projects: MAT2011-29081-C02, MAT2012-33207 and MAT2013-47869-C4-1-P, Consolider-Ingenio CSD2008-00023) and the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 645658. We also acknowledge financial aid from the Generalitat de Catalunya (2014 SGR 501 and 2014 SGR 1216). J. S. thanks the support of Ministry of Education and Science through program “Salvador de Madariaga” for a grant (ref: PRX14/00297) to perform a stay at MIT. Z.K. is grateful for the support from the Ministry of Education, Science, and Technological Development of the Republic of Serbia through Project III45018. Q.L. and B.Y. thank the National Science Foundation for support through the MIT Center of Materials Science and Engineering MRSEC under grant no. DMR-1419807. This work made use of the Shared Experimental Facilities supported in part by the MRSEC Program of the National Science Foundation under award number DMR – 1419807. We thank Dr. Belén Ballesteros (ICN2, Barcelona) and Prof. Marie-Jo Casanova (CEMES, Toulouse) for their assistance with transmission electron microscopy experiments. We are grateful to J. Rubio-Zuazo and the ESRF for providing assistance in using beamline BM25. We also thank HZB for the allocation of synchrotron radiation beamtime at Bessy., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unravelling and controlling hidden imprint fields in ferroelectric capacitors

  • Fanmao, Liu
  • Fina, Ignasi
  • Bertacco, Riccardo
  • Fontcuberta, Josep
Ferroelectric materials have a spontaneous polarization that can point along energetically equivalent, opposite directions. However, when ferroelectric layers are sandwiched between different metallic electrodes, asymmetric electrostatic boundary conditions may induce the appearance of an electric field (imprint field, E imp) that breaks the degeneracy of the polarization directions, favouring one of them. This has dramatic consequences on functionality of ferroelectric-based devices such as ferroelectric memories or photodetectors. Therefore, to cancel out the E imp, ferroelectric components are commonly built using symmetric contact configuration. Indeed, in this symmetric contact configuration, when measurements are done under time-varying electric fields of relatively low frequency, an archetypical symmetric single-step switching process is observed, indicating E imp ∼ 0. However, we report here on the discovery that when measurements are performed at high frequency, a well-defined double-step switching is observed, indicating the presence of E imp. We argue that this frequency dependence originates from short-living head-to-head or tail-to-tail ferroelectric capacitors in the device. We demonstrate that we can modulate E imp and the life-time of head-to-head or tail-to-tail polarization configurations by adjusting the polarization screening charges by suitable illumination. These findings are of relevance to understand the effects of internal electric fields on pivotal ferroelectric properties, such as memory retention and photoresponse., This work is supported by the Spanish Government (MAT2014-56063-C2-1-R) and by the Catalan Government (2014 SGR 734). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015- 0496). Ignasi Fina acknowledges the Beatriu de Pinós postdoctoral scholarship (2011 BP-A_2 00014) from AGAUR-Generalitat de Catalunya. Fanmao Liu is financially supported by China Scholarship Council (CSC) with No. 201306020016. We are thankful to F. Sánchez, and M. Cantoni, for growing the films and making the preliminary characterization of the films, and to M. Stengel for inspiring discussions., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Absence of magnetic proximity effects in magnetoresistive Pt/CoFe2O4 hybrid interfaces

  • Valvidares, Manuel
  • Dix, Nico
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
Valvidares, Manuel et al., Ultrathin Pt films grown on insulating ferrimagnetic CoFe2O4 (111) epitaxial films display a magnetoresistance upon rotating the magnetization of the magnetic layer. We report here x-ray magnetic circular dichroism (XMCD) recorded at Pt-L2,3 and Pt-M3 edges. The results indicate that the Pt magnetic moment, if any, is below the detection limit (<0.001μB/Pt), thus strongly favoring the view that the presence of CoFe2O4 does not induce the formation of magnetic moments in Pt. Therefore, the observed magnetoresistance cannot be attributed to some sort of proximity-induced magnetic moments at Pt ions and subsequent magnetic-field dependent scattering. It thus follows that either bulk (spin Hall and inverse spin Hall effects) or interface (Rashba) spin-orbit related effects dominate the observed magnetoresistance. Furthermore, comparison of bulk magnetization and XMCD data at (Fe,Co)-L2,3 edges suggests the presence of some spin disorder in the CoFe2O4 layer which may be relevant for the observed anomalous nonsaturating field dependence of spin Hall magnetoresistance., This work is supported by the European Union under the NMP project (263104-HINTS) and the European Research Council (257654-SPINTROS). The financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496) and the projects (MAT2012-37638, MAT2014-56063-C2-1-R, FIS2013-45469-C4-3-R, MAT2014-59315-R and MAT2015-65159-R) and by the Catalan Government (2014 SGR 734) are acknowledged. M. I. acknowledges the Basque Government for a PhD fellowship (BFI-2011-106). Beam time access at ESRF and ALBA facilities, at beamlines ID12 and BL29 respectively, is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiple strain-induced phase transitions in LaNiO3 thin films

  • Weber, M.C.
  • Dix, Nico
  • Pesquera, David
  • Sánchez Barrera, Florencio
  • Herranz, Gervasi
  • Fontcuberta, Josep
  • Íñiguez, Jorge
  • Kreisel, J.
Weber, M.C. et al., Strain effects on epitaxial thin films of LaNiO3 grown on different single crystalline substrates are studied by Raman scattering and first-principles simulation. New Raman modes, not present in bulk or fully-relaxed films, appear under both compressive and tensile strains, indicating symmetry reductions. Interestingly, the Raman spectra and the underlying crystal symmetry for tensile and compressively strained films are different. Extensive mapping of LaNiO3 phase stability is addressed by simulations, showing that a variety of crystalline phases are indeed stabilized under strain which may impact the electronic orbital hierarchy. The calculated Raman frequencies reproduce the principal features of the experimental spectra, supporting the validity of the multiple strain-driven structural transitions predicted by the simulations., J.K., M.W., M.G., and J.I. acknowledge support from the National Research Fund, Luxembourg through a Pearl grant (Grant No. FNR/P12/4853155). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015- 0496) and the MAT2014-56063-C2-1-R and MAT2013- 40581-P projects, and from Generalitat de Catalunya (2014 SGR 734). UB authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, project MAT2013-41506-P and from Generalitat de Catalunya (2014 SGR 672)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-Controlled Responsiveness of Slave Half-Doped Manganite La0.5Sr0.5MnO3 Layers Inserted in BaTiO3 Ferroelectric Tunnel Junctions

  • Radaelli, Greta
  • Gutiérrez Yatacue, Diego F.
  • Mengdi, Qian
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Baldrati, Lorenzo
  • Heidler, Jakoba
  • Piamonteze, Cinthia
  • Bertacco, Riccardo
  • Fontcuberta, Josep
Insertion of layers displaying field-induced metal-to-insulator (M/I) transition in ferroelectric tunnel junctions (FTJs) has received attention as a potentially useful way to enlarge junction tunnel electroresistance (TER). Half-doped manganites being at the verge of metal-insulator character are thus good candidates to be slave layers in FTJs. However, the phase diagram of these oxides is extremely sensitive to strain and thus can be radically different when integrated in epitaxial FTJs. Here we report a systematic study of large-area (A = 4 to 100 m2) Pt/La0.5Sr0.5MnO3/BaTiO3/La0.7Sr0.3MnO3 (Pt/HD/BTO/LSMO) FTJs, having different thicknesses of the ferroelectric (2-3nm) and HD layers (1-2nm), grown on substrates imposing either tensile (SrTiO3) or compressive (LaAlO3) strains. Room-temperature electric characterization of the FTJs shows polarization-controlled ON/ OFF states. Clear evidences of field-induced M/I transition (difference between junction resistance in OFF and ON state is increased of more than one order of magnitude) are observed in junctions prepared on SrTiO3 but the HD layer is generally metallic on LaAlO3. Moreover, the M/I transition is only confined in an interfacial layer of the slave film thus entailing an overall reduction of TER. The orderly results reported here give some hints towards selection of HD materials and substrates for optimal FTJ responsiveness., This work has been partially supported by grants from the Spanish Government (MAT2014-56063-C2-1R, MAT2015-73839-JIN and SEV-2015-0496), by the Catalan Government (2014 SGR 734) and by Fondazione Cariplo via the project MAGISTER (grant n. 2013-0726). IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The 2016 oxide electronic materials and oxide interfaces roadmap

  • Lorenz, M.
  • Fontcuberta, Josep
  • Pryds, N.
Lorenz, M. et al., Oxide electronic materials provide a plethora of possible applications and offer ample opportunity for scientists to probe into some of the exciting and intriguing phenomena exhibited by oxide systems and oxide interfaces. In addition to the already diverse spectrum of properties, the nanoscale form of oxides provides a new dimension of hitherto unknown phenomena due to the increased surface-to-volume ratio. Oxide electronic materials are becoming increasingly important in a wide range of applications including transparent electronics, optoelectronics, magnetoelectronics, photonics, spintronics, thermoelectrics, piezoelectrics, power harvesting, hydrogen storage and environmental waste management. Synthesis and fabrication of these materials, as well as processing into particular device structures to suit a specific application is still a challenge. Further, characterization of these materials to understand the tunability of their properties and the novel properties that evolve due to their nanostructured nature is another facet of the challenge. The research related to the oxide electronic field is at an impressionable stage, and this has motivated us to contribute with a roadmap on ‘oxide electronic materials and oxide interfaces’. This roadmap envisages the potential applications of oxide materials in cutting edge technologies and focuses on the necessary advances required to implement these materials, including both conventional and novel techniques for the synthesis, characterization, processing and fabrication of nanostructured oxides and oxide-based devices. The contents of this roadmap will highlight the functional and correlated properties of oxides in bulk, nano, thin film, multilayer and heterostructure forms, as well as the theoretical considerations behind both present and future applications in many technologically important areas as pointed out by Venkatesan. The contributions in this roadmap span several thematic groups which are represented by the following authors: novel field effect transistors and bipolar devices by Fortunato, Grundmann, Boschker, Rao, and Rogers; energy conversion and saving by Zaban, Weidenkaff, and Murakami; new opportunities of photonics by Fompeyrine, and Zuniga-Perez; multiferroic materials including novel phenomena by Ramesh, Spaldin, Mertig, Lorenz, Srinivasan, and Prellier; and concepts for topological oxide electronics by Kawasaki, Pentcheva, and Gegenwart. Finally, Miletto Granozio presents the European action ‘towards oxide-based electronics’ which develops an oxide electronics roadmap with emphasis on future nonvolatile memories and the required technologies. In summary, we do hope that this oxide roadmap appears as an interesting up-to-date snapshot on one of the most exciting and active areas of solid state physics, materials science, and chemistry, which even after many years of very successful development shows in short intervals novel insights and achievements., This work has been partially supported by the TO-BE COST action MP1308. J F acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496) and MAT2014-56063-C2-1R, and from the Catalan Government (2014 SGR 734). F.M.G. acknowledges support from MIUR through the PRIN 2010 Project ‘OXIDE’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thickness and temperature dependence of the magnetodynamic damping of pulsed laser deposited La0.7Sr0.3MnO3 on (111)-oriented SrTiO3

  • Flovik, Vegard
  • Macià Bros, Ferran
  • Lendínez, Sergi
  • Hernández, Joan Manel
  • Hallsteinsen, Ingrid
  • Tybell, Thomas
  • Wahlström, Erik
We have investigated the magnetodynamic properties of La0.7Sr0.3MnO3 (LSMO) films of thickness 10, 15 and 30 nm grown on (111)-oriented SrTiO3 (STO) substrates by pulsed laser deposition. Ferromagnetic resonance (FMR) experiments were performed in the temperature range 100–300 K, and the magnetodynamic damping parameter α was extracted as a function of both film thickness and temperature. We found that the damping is lowest for the intermediate film thickness of 15 nm with α≈2·10−3, where α is relatively constant as a function of temperature well below the Curie temperature of the respective films., This work was supported by the Norwegian Research Council (NFR), project number 216700. V.F acknowledge partial funding obtained from the Norwegian PhD Network on Nanotechnology for Microsystems, which is sponsored by the Research Council of Norway, Division for Science, under contract no. 221860/F40. F.M. acknowledges financial support from RYC-2014-16515 and from the MINECO through the Severo Ochoa Program (SEV- 2015-0496). J.M and F.M aslo acknowledge funding from MINECO through MAT2015-69144., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Describing synchronization and topological excitations in arrays of magnetic spin torque oscillators through the Kuramoto model

  • Flovik, Vegard
  • Macià, Ferran
  • Wahlström, Erik
The collective dynamics in populations of magnetic spin torque oscillators (STO) is an intensely studied topic in modern magnetism. Here, we show that arrays of STO coupled via dipolar fields can be modeled using a variant of the Kuramoto model, a well-known mathematical model in non-linear dynamics. By investigating the collective dynamics in arrays of STO we find that the synchronization in such systems is a finite size effect and show that the critical coupling—for a complete synchronized state—scales with the number of oscillators. Using realistic values of the dipolar coupling strength between STO we show that this imposes an upper limit for the maximum number of oscillators that can be synchronized. Further, we show that the lack of long range order is associated with the formation of topological defects in the phase field similar to the two-dimensional XY model of ferromagnetism. Our results shed new light on the synchronization of STO, where controlling the mutual synchronization of several oscillators is considered crucial for applications., This work was supported by the Norwegian Research Council (NFR), project number 216700. V.F. acknowledge partial funding obtained from the Norwegian PhD Network on Nanotechnology for Microsystems, which is sponsored by the Research Council of Norway, Division for Science, under contract no. 221860/F40. F.M. acknowledges financial support from the Ramón y Cajal program through RYC-2014-16515 and from the MINECO through the Severo Ochoa Program for Centers of Excellence in R&D (SEV- 2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A silica-based magnetic platform decorated with mixed ligand gold nanoparticles: a recyclable catalyst for esterification reactions

  • Ertem, Elif
  • Murillo Cremaes, Nerea
  • Carney, Randy Patrick
  • Laromaine, Anna
  • Janeček, Emma-Rose
  • Roig Serra, Anna
  • Stellacci, Francesco
A novel and convenient synthetic strategy for the preparation of magnetically responsive silica nanospheres decorated with mixed ligand protected gold nanoparticles is described. Gold nanoparticles are attached to the silica surface via stable amide bond formation. The hierarchical nanospheres show promising results as a reusable and efficient catalyst for esterification reactions and they can be recovered through a simple magnetic separation., This research was partially funded by Spanish Ministry of Economy (MAT2012-35324, Ramon y Cajal grant (AL) RYC-2010-06082), People Program of the European Commission (grant agreement no. 303630, co-funded by the European Social Fund) and the Generalitat de Catalunya (2014SGR213). Support from the Swiss National Science Foundation is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical devices for the detection of priority pollutants listed in the EU water framework directive

  • Díaz González, María
  • Gutiérrez-Capitán, Manuel
  • Pengfei, Niu
  • Baldi Coll, Antonio
  • Jiménez-Jorquera, Cecilia
  • Fernández Sánchez, César
Monitoring chemical contamination in water is a must to guarantee the supply to the society of this more and more scarce prized asset. The European Union as well as other bodies have released reports and directives defining lists of substances whose detection in waters should be prioritized and posing limits to the maximum allowable concentrations that drinking water must have. The scientific community has been actively working on the development of analytical tools that could be applied in the detection of hazardous chemical species in waters. Here, an overview of electrochemical devices with the potential of being implemented to the monitoring of the forty five pollutants include in the list of priority substances set in the 2013 EU directive that could be grouped into heavy metals, pesticides, hydrocarbons, halogenated hydrocarbons and alkyl phenols, is given, aiming at showing their benefits and limitations in this scenario., P.N. acknowledges the China Scholarship Council for the award of a PhD fellowship (grant no. [2012]3013)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic disorder, phonon lifetimes, and the assignment of modes to the vibrational spectra of methylammonium lead halide perovskites

  • Leguy, Aurélien M. A.
  • Goñi, Alejandro R.
  • Rodríguez Martínez, Xabier
  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
  • Barnes, Piers R. F.
Leguy, Aurélien M. A. et al., We present Raman and terahertz absorbance spectra of methylammonium lead halide single crystals (MAPbX3, X = I, Br, Cl) at temperatures between 80 and 370 K. These results show good agreement with density-functional-theory phonon calculations.1 Comparison of experimental spectra and calculated vibrational modes enables confident assignment of most of the vibrational features between 50 and 3500 cm-1. Reorientation of the methylammonium cations, unlocked in their cavities at the orthorhombic-to-tetragonal phase transition, plays a key role in shaping the vibrational spectra of the different compounds. Calculations show that these dynamics effects split Raman peaks and create more structure than predicted from the independent harmonic modes. This explains the presence of extra peaks in the experimental spectra that have been a source of confusion in earlier studies. We discuss singular features, in particular the torsional vibration of the C-N axis, which is the only molecular mode that is strongly influenced by the size of the lattice. From analysis of the spectral linewidths, we find that MAPbI3 shows exceptionally short phonon lifetimes, which can be linked to low lattice thermal conductivity and supressed electron-phonon scattering events., The authors thank Juraj Sibik and Axel Zeitler for their contribution in the measurement and interpretation of the terahertz absorption spectra, and Philip Calado and Davide Moia for their helpful discussions regarding the TOC graphic. PB and AL are grateful to the EPSRC (EP/J002305/1, EP/M014797/1 and EP/M023532/1) for financial support. The work at Bath was supported by the EPSRC (EP/K016288/1, EP/K004956/1, EP/L000202, and EP/M009580/1) and the ERC (Grant 277757). ARG, MIA and MCQ thank the Spanish Ministry of Economy and Competitiveness (MINECO) for its support through Grant No. CSD2010-00044 (Consolider NANOTHERM) and MAT2015-70850-P (HIBRI2). The work at ICMAB was carried out under the auspices of the Spanish Severo Ochoa Centre of Excellence program (grant SEV-2015-0496). F. B. is funded through the EU DESTINY Network (Grant No. 316494). JN acknowledges the EPSRC for founding (EP/J017361). AP would like to thank the Royal Irish Academy for the Charlemont grant for funding the research visit that made the terahertz work possible., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the origin of high optical absorption in conjugated polymers

  • Vezie, Michelle S.
  • Dörling, Bernhard
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
  • Nelson, Jenny
Vezie, Michelle S. et al., The specific optical absorption of an organic semiconductor is critical to the performance of organic optoelectronic devices. For example, higher light-harvesting efficiency can lead to higher photocurrent in solar cells that are limited by sub-optimal electrical transport. Here, we compared over 40 conjugated polymers, and found that many different chemical structures share an apparent maximum in their extinction coefficients. However, a diketopyrrolopyrrole-thienothiophene copolymer shows remarkably high optical absorption at relatively low photon energies. By investigating its backbone structure and conformation with measurements and quantum chemical calculations, we find that the high optical absorption can be explained by the high persistence length of the polymer. Accordingly, we demonstrate high absorption in other polymers with high theoretical persistence length. Visible light harvesting may be enhanced in other conjugated polymers through judicious design of the structure., M.S.V. and S. F. are grateful to the Engineering and Physical Sciences Research Council (EPSRC) for a doctoral training award and a CDT studentship (EP/G037515/1) respectively. G.P. and S.C.H. acknowledge the University of Cyprus for funding through the internal grant "ORGANIC". B.D., A.G. and M.C.Q. acknowledge financial support from the Ministerio de Economía y Competitividad of Spain through projects CSD2010–00044 (Consolider NANOTHERM), SEV-2015_0496 and MAT2012–37776 and the European Research Council through project ERC CoG648901. I.M., R.S.A. and I.McC. acknowledge support from the European Commission FP7 Project ArtESun (604397). J.N. is grateful to the Royal Society for a Wolfson Merit Award, and acknowledges financial support from EPSRC grants EP/K030671/1, EP/K029843/1 and EP/J017361/1. The authors thank Dr. Isabel Alonso for performing supplementary ellipsometric measurements; we thank Prof. Thomas Kirchartz, Dr. Jarvist Moore Frost, Dr. Christian Müller and Dr. Isabel Alonso for helpful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal Phase Effects in Si Nanowire Polytypes and Their Homojunctions

  • Amato, Michele
  • Kaewmaraya, Thanayut
  • Zobelli, Alberto
  • Palummo, Maurizia
  • Rurali, Riccardo
Recent experimental investigations have confirmed the possibility to synthesize and exploit polytypism in group IV nanowires. Driven by this promising evidence, we use first-principles methods based on density functional theory and many-body perturbation theory to investigate the electronic and optical properties of hexagonal–diamond and cubic–diamond Si NWs as well as their homojunctions. We show that hexagonal–diamond NWs are characterized by a more pronounced quantum confinement effect than cubic–diamond NWs. Furthermore, they absorb more light in the visible region with respect to cubic–diamond ones and, for most of the studied diameters, they are direct band gap materials. The study of the homojunctions reveals that the diameter has a crucial effect on the band alignment at the interface. In particular, at small diameters the band-offset is type-I whereas at experimentally relevant sizes the offset turns up to be of type-II. These findings highlight intriguing possibilities to modulate electron and hole separations as well as electronic and optical properties by simply modifying the crystal phase and the size of the junction., We thank L. Vincent for fruitful discussions. We acknowledge financial support by the Ministerio de Economía y Competitividad (MINECO) under grant FEDER-MAT2013-40581-P and the Severo Ochoa Centres of Excellence Program under Grant SEV-2015-0496 and by the Generalitat de Catalunya under grants no. 2014 SGR 301. M.A. and T.K. acknowledge support from the Nanodesign project "Nanoharvesting" funded by the IDEX Paris-Saclay (ANR-11-IDEX-0003-02). Part of this work was made possible thanks to the HPC resources of IDRIS under the allocation i2015097422 and i2016097531 made available by GENCI (Grand Equipement National de Calcul Intensif) and the computer resources, technical expertise, and assistance provided by the Red Española de Supercomputación. M.P. acknowledges the EC for the RISE Project No. CoExAN GA644076 and CINECA for ISCRA-B Project No.HP10B0LUWN, for computational resources., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigation of proton damage in III-V semiconductors by optical spectroscopy

  • Yaccuzzi, E.
  • Khachadorian, S.
  • Suárez, S.
  • Reinoso, M.
  • Goñi, Alejandro R.
  • Strittmatter, A.
  • Ho mann, A.
  • Giudici, P.
We studied the damage produced by 2MeV proton radiation on epitaxially grown InGaP/GaAs structure by means of spatially resolved Raman and photoluminescence (PL) spectroscopy. The irradiation was performed parallel to the sample surface in order to determine the proton penetration range in both compounds. An increase in the intensity of longitudinal optical phonons and a decrease in the luminescence were observed. We associate these changes with the creation of defects in the damaged region, also responsible for the observed change of the carrier concentration in the GaAs layer, determined by the shift of the phonon-plasmon coupled mode frequency. From the spatially resolved profile of the PL and phonon intensities, we obtained the proton range in both materials and we compared them with stopping and range of ions in matter simulations. The comparison between the experimentally obtained proton range and simulations shows a very good agreement for GaAs but a discrepancy of 20% for InGaP. This discrepancy can be explained in terms of limitations of the model to simulate the electronic orbitals and bonding structure of the simulated compound. In order to overcome this limitation, we propose an increase in 40% in the electronic stopping power for InGaP., This work was supported by BEC.AR FUNDACION YPF-CONICET 2013 (Argentina) and DFG within Grant No. SFB 787. ARG thanks the Spanish Ministry of Economy and Competitiveness (MINECO) for its support through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electronic wave functions and optical transitions in (In,Ga)As/GaP quantum dots

  • Robert, Cédric
  • Pereira da Silva, Katiane
  • Alonso Carmona, M. Isabel
  • Goñi, Alejandro R.
  • Cornet, Charles
Robert, Cédric et al., We study the complex electronic band structure of low In content InGaAs/GaP quantum dots. A supercell extended-basis tight-binding model is used to simulate the electronic and the optical properties of a pure GaAs/GaP quantum dot modeled at the atomic level. Transitions between hole states confined into the dots and several XZ-like electronic states confined by the strain field in the GaP barrier are found to play the main role on the optical properties. Especially, the calculated radiative lifetime for such indirect transitions is in good agreement with the photoluminescence decay time measured in time-resolved photoluminescence in the µs range. Photoluminescence experiments under hydrostatic pressure are also presented. The redshift of the photoluminescence spectrum with pressure is also in good agreement with the nature of the electronic confined states simulated with the tight-binding model., A.R.G. and M.I.A. acknowledge support from the Spanish Ministry of Economy and Competitiveness (MINECO) through Grant No. MAT2009-09480 (PIEZOHM) and Severo Ochoa Excellence Centre Award (No. SEV-2015-0496). M.O.N. acknowledges financial support from the Russian Foundation for Basic Research. This research is supported by “Region Bretagne” through the PONANT project including ´ FEDER funds. This paper is also supported by the OPTOSI Agence Nationale pour la Recherche Project No. 12-BS03- 002-02. This work has been performed using HPC resources of GENCI CINES, TGCC/CCRT, and IDRIS under the allocation No. 2013-[x2013096724]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Joint Computational and Experimental Evaluation of CaMn2O4 Polymorphs as Cathode Materials for Ca Ion Batteries

  • Arroyo-de Dompablo, M. Elena
  • Krich, Christopher
  • Nava Avendaño, Jessica
  • Biskup, Neven
  • Palacín, M. Rosa
  • Bardé, Fanny
The identification of potential cathode materials is a must for the development of a new calcium-ion based battery technology. In this work, we have first explored the electrochemical behavior of marokite−CaMn2O4 but the experimental attempts to deinsert Ca ion from this compound failed. First-principles calculations indicate that in terms of voltage and capacity, marokite−CaMn2O4 could sustain reversible Ca deinsertion reactions; half decalciation is predicted at an average voltage of 3.7 V with a volume variation of 6%. However, the calculated barriers for Ca diffusion are too high (1 eV), in agreement with the observed difficulty to deinsert Ca ion from the marokite structure. We have extended the computational investigation to two other CaMn2O4 polymorphs, the spinel and the CaFe2O4 structural types. Full Ca extraction from these CaMn2O4 polymorphs is predicted at an average voltage of 3.1 V, but with a large volume variation of around 20%. Structural factors limiting Ca diffusion in the three polymorphs are discussed and confronted with a previous computational investigation of the virtual-spinel [Ca]T[Mn2]OO4. Regardless the potential interest of [Ca]T[Mn2]OO4 as cathode for Ca ion batteries, calculations suggests that the synthesis of this compound would hardly be feasible. The present results unravel the bottlenecks associated with the design of feasible intercalation Ca electrode materials, and allow proposing guidelines for future research., The authors are grateful to A. Ponrouch and D. Tchitchekova for assistance with the electrochemical tests, to F. Rosciano for advices related to the material synthesis and characterization and to the Toyota Battery Research division at Higashi Fuji (M6) for financial support. M.E. Arroyo and N. Biskup ̌ acknowledge access to computational resources from Universidad de Oviedo (MALTA-Consolider cluster) and Spain’s national high performance computer service (I2 Basque Centre). ICMAB authors acknowledge the Spanish Ministry of Economy and Competitiveness (“Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496))., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In quest of cathode materials for Ca ion batteries: the CaMO3 perovskites (M = Mo, Cr, Mn, Fe, Co, and Ni)

  • Arroyo-de Dompablo, M. Elena
  • Krich, Christopher
  • Nava Avendaño, Jessica
  • Palacín, M. Rosa
  • Bardé, Fanny
Basic electrochemical characteristics of CaMO3 perovskites (M = Mo, Cr, Mn, Fe, Co, and Ni) as cathode materials for Ca ion batteries are investigated using first principles calculations at the Density Functional Theory level (DFT). Calculations have been performed within the Generalized Gradient Approximation (GGA) and GGA+U methodologies, and considering cubic and orthorhombic perovskite structures for CaxMO3 (x = 0, 0.25, 0.5, 0.75 and 1). The analysis of the calculated voltage–composition profile and volume variations identifies CaMoO3 as the most promising perovskite compound. It combines good electronic conductivity, moderate crystal structure modifications, and activity in the 2–3 V region with several intermediate CaxMoO3 phases. However, we found too large barriers for Ca diffusion (around 2 eV) which are inherent to the perovskite structure. The CaMoO3 perovskite was synthesized, characterized and electrochemically tested, and results confirmed the predicted trends., The authors would like to thank F. Rosciano for advice and support in synthesizing the perovskite material and A. Ponrouch and D. Tchitchekova for assistance with the electrochemical tests. The Toyota Battery Research division at Higashi Fuji (M6) is acknowledged for financial support and ICMAB authors are grateful to the Spanish Ministry of Economy and Competitiveness for support through the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D (SEV-2015-0496). M. E. Arroyo acknowledges access to computational resources from Universidad de Oviedo (MALTA-Consolider cluster) and to A. Saracibar for assistance in the analysis of DFT data and fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessing Si-based anodes for Ca-ion batteries: Electrochemical decalciation of CaSi2

  • Ponrouch, Alexandre
  • Tchitchekova , Deyana S.
  • Frontera, Carlos
  • Bardé, Fanny
  • Arroyo-de Dompablo, M. Elena
  • Palacín, M. Rosa
Density functional theory (DFT) calculations are used to investigate the basic electrochemical characteristics of Si-based anodes in calcium ion batteries (CIBs). The calculated average voltage of Ca alloying with fcc-Si to form the intermetallic CaxSi phases (0.5 b x ≤ 2) is of 0.4 V, with a volume variation of 306%. Decalciation of the lower Ca content phase, CaSi2, is predicted at an average voltage between 0.57 V (formation of Si-fcc, 65% volume variation) and 1.2 V (formation of metastable deinserted-Si phase, 29% volume variation). Experiments carried out in conventional alkyl carbonate electrolytes show evidence that electrochemical “decalciation” of CaSi2 is possible at moderate temperatures. The decalciation of CaSi2 is confirmed by different characterization techniques., We are grateful to the Toyota Battery Research division at Higashi Fuji (M6) for financial support. Diffraction experiments were performed at MSPD beamline at ALBA Synchrotron and the collaboration of François Fauth (ALBA staff) is sincerely acknowledged. ICMAB authors acknowledge the Spanish Ministry of Economy and Competitiveness (“Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496))., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dielectric characterization of multiferroic magnetoelectric double-perovskite Y(Ni0.5Mn0.5)O3 thin films

  • Coy, L.E.
  • Fina, Ignasi
  • Ventura Altozano, Jofre
  • Yate, L.
  • Langenberg, Eric
  • Polo, Mª. del Carmen
  • Ferrater Martorell, César
  • Varela, M.
We report on the functional properties of the Y(Ni0.5Mn0.5)O3 epitaxial thin films, growth by pulsed laser deposition, observing the clear features of their ferroelectric and ferromagnetic nature at cryogenic temperature. The characterization of temperature-dependent complex impedance spectroscopy has shown a dielectric anomaly around the ferromagnetic Curie temperature (100 K) indicative of coupling between magnetic and electric orders., The financial support by the Ministerio de Ciencia e Innovacion of the Spanish Government (Grant No. BES-2009-028641 and Project Nos. MAT2011-29269-C03-03, NANOSELECT, MAT2014-56063-C2-2-R, CSD2007-00041, MAT2015-73839-JIN, and IMAGINE CSD2009-00013) and Generalitat de Catalunya (2014 SGR 734) is acknowledged. E.C. would like to thank the National Science Centre of Poland under the PRELUDIUM (UMO-2015/17/N/ST5/ 01988) for financial support. I.F. acknowledges the financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), and also the Juan de la Cierva–Incorporacion postdoctoral fellowship (IJCI- 2014-19102) from the Spanish Ministry of Economy and Competitiveness of Spanish Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, crystal structure and magnetic properties of a Cu(II) paddle-wheel complex with mixed bridges

  • Soldevila Sanmartín, Joan
  • Ayllón, José A.
  • Calvet, Teresa
  • Font Bardia, Mercè
  • Domingo, Concepción
  • Pons, Josefina
The synthesis and characterization of a mixed carboxylate paddle-wheel copper complex, with formula [Cu(μ-Pip)(μ-MeCO2)(MeOH)]2 (Pip = piperonylate or 1,3-benzodioxole-5-carboxylate and MeCO2 = acetate), is here reported. The described compound is a binuclear complex, each pair of similar carboxylate ligands occupying mutually trans bridging positions, while the methanol occupies the apical positions. The dimers are arranged into 2D layers in the bc plane through a network of O-H ⋯ O hydrogen bonds established between the methanol and the acetate ligand. Magnetic studies showed a strong antiferromagnetic Cu ⋯ Cu interaction (J = − 308 cm− 1), in agreement with the presence of four μ-κO-κO′ carboxylates bridging the metallic centers in the binuclear complex., This work was partially financed by the Spanish National Plan of ResearchCTQ2014-56324 and Severo OchoaSEV-2015-0496, and by the 2014SGR260 and 2014SGR377 projects from the Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Titanium oxide – reduced graphene oxide – silver composite layers synthesized by laser technique: Wetting and electrical properties

  • Gyorgy, Eniko
  • Pérez del Pino, Ángel
  • Datcu, Angela
  • Duta, Liviu
  • Logofatu, Constantin
  • Iordache, Iuliana
  • Duta, Anca
Electrically conductive and highly hydrophobic surface layers are attractive for many practical applications. In this work the functional, wetting and electrical properties of titanium dioxide (TiO2), TiO2/silver (Ag), and TiO2/reduced graphene oxide (rGO)/Ag nanocomposite coatings layers are reported. The functional properties of the layers were correlated with their chemical composition and bonding states between the constituent elements, determined in turn by the synthesis and immobilization process parameters. The nanocomposite coatings were obtained by matrix assisted pulsed laser evaporation, a laser-based environmental friendly thin film deposition technique. The synthesized ternary TiO2/rGO/Ag coatings has optimum performances, highly hydrophobic character and low electrical resistance, attributed to the presence of Ag nanoparticles and to the reduction of the oxygen containing functional groups of the GO platelets during laser irradiation and transfer processes leading to the formation of graphene-like material., The authors acknowledge the financial support from the Romanian Ministry of Education and Scientific Research under the contract PN-IIPT-PCCA-2011-3.2-1235 and the Spanish Economy and Competitiveness Ministry under the contract ENE2014-56109-C3-3-R. ICMAB acknowledges financial support from the Spanish Economy and Competitiveness Ministry, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of dry SmCl3 from Sm2O3 revisited. Implications for the encapsulation of samarium compounds into carbon nanotubes

  • Martincic, Markus
  • Frontera, Carlos
  • Pach, Elzbieta
  • Ballesteros, Belén
  • Tobias, Gerard
Samarium is a rare-earth metal with several applications in materials science. It is used in organic chemistry as a reducing agent and it is the active payload in samarium-153 lexidronam, a drug being used for palliative treatment of bone metastases. Recently, the encapsulation of samarium compounds into the cavities of carbon nanotubes has attracted interest for the development of the next generation of radiopharmaceuticals. In the present study, we explore different routes to afford the encapsulation of samarium based materials into single-walled carbon nanotubes. Anhydrous samarium(III) chloride, despite being highly hygroscopic, raises as an excellent candidate to achieve a high filling efficiency. We provide a protocol that allows the synthesis of anhydrous samarium(III) chloride starting from samarium(III) oxide in a fast and simple manner. Synchrotron X-ray powder diffraction confirmed the crystallinity and purity of the synthesized SmCl3., This work has received funding from the European Union’s Seventh Framework Programme for research, technological development and demonstration under Grant agreement no 290023, RADDEL. The authors are grateful to Thomas Swan Co. Ltd. for supplying Elicarb® single-walled carbon nanotubes. The authors acknowledge Ion Such and Sara Llopis from Universidad de Alicante for her assistance with the TGA-MS. The authors are also grateful to MATGAS for providing access to TGA equipment and Mar Estelles for training and support. MM and EP work has been done as a part of their PhD program in Materials Sciences at UAB. ICMAB and ICN2 acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496 and SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Shortening of MWNT-SPION Hybrids by Steam Treatment Improves Their Magnetic Resonance Imaging Properties In Vitro and In Vivo

  • Cabana, Laura
  • Fontcuberta, Josep
  • Tobias, Gerard
Cabana, Laura et al., Carbon nanotubes (CNTs) have been advocated as promising nanocarriers in the biomedical field. Their high surface area and needle-like shape make these systems especially attractive for diagnostic and therapeutic applications. Biocompatibility, cell internalization, biodistribution, and pharmacokinetic profile have all been reported to be length dependent. In this study, further insights are gotten on the role that the length of CNTs plays when developing novel contrast agents for magnetic resonance imaging (MRI). Two samples of CNTs with different length distribution have been decorated with radio-labeled iron oxide nanoparticles. Despite characterization of the prepared hybrids reveals a similar degree of loading and size of the nanoparticles for both samples, the use of short CNTs is found to enhance the MRI properties of the developed contrast agents both in vitro and in vivo compared to their long counterparts. Keywords, L.C. and M.B. contributed equally to this work. The authors are grateful to Thomas Swan Co. & Ltd for supplying the Elicarb MWNT samples. L.C. acknowledges a CSIC JAE Predoc Fellowship. M.B. is a Marie Curie Fellow. Funding from FP7-ITN Marie-Curie Network programme RADDEL (290023), Biotechnology and Biological Sciences Research Council (BB/J008656/1), Worldwide Cancer Research (12-1054), and Spanish Ministry of Economy and Competitiveness (MAT2014-53500-R and MAT2014-56063-C2-1R) is acknowledged. R.T.M.D. acknowledges funding by The Centre of Excellence in Medical Engineering funded by the Wellcome Trust and EPSRC under Grant No. WT 088641/Z/09/Z. L.C., J.F., and G.T./ ICMAB acknowledge fi nancial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). K.T.A., G.T, and R.T.M.D. thank the members of the EU COST actions TD1004 (Theranostics Imaging and Therapy: An Action to Develop Novel Nanosized Systems for Imaging-Guided Drug Delivery) and TD1007 (Bimodal PET-MRI molecular imaging technologies and applications for in vivo monitoring of disease and biological processes) for useful discussions. The XPS data were acquired at the Laboratorio de Microscopías Avanzadas (LMA) – Instituto de Nanociencia de Aragón (INA) (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the Influence of the Electronic Structure on the Crystal Structure of a TTF-PTM Radical Dyad

  • Vela Llausi, Sergi
  • Souto Salom, Manuel
  • Ratera, Immaculada
  • Rovira, Concepció
  • Veciana, Jaume
The understanding of the crystal structure of organic compounds, and its relationship to their physical properties, have become essential to design new advanced molecular materials. In this context, we present a computational study devoted to rationalize the different crystal packing displayed by two closely related organic systems based on the TTF-PTM dyad (TTF = tetrathiafulvalene, PTM = polychlorotriphenylmethane) with almost the same molecular structure but a different electronic one. The radical species (1), with an enhanced electronic donor–acceptor character, exhibits a herringbone packing, whereas the nonradical protonated analogue (2) is organized forming dimers. The stability of the possible polymorphs is analyzed in terms of the cohesion energy of the unit cell, intermolecular interactions between pairs, and molecular flexibility of the dyad molecules. It is observed that the higher electron delocalization in radical compound 1 has a direct influence on the geometry of the molecule, which seems to dictate its preferential crystal structure., This work was supported by the DGI grant (CTQ2013- 40480-R), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), the EU ITN iSwitch 642196, the NANO2FUN Project No. 607721 and the Generalitat de Catalunya (grant 2014-SGR-17). ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). S.V. is thankful to the LabEx-Chemistry of Complex Systems for a post-doctoral grant (ANR-10-LABX-0026CSC) and to the regional High-Performance Computing (HPC) center in Strasbourg for computational resources. M.S. is enrolled in the Material Science Ph.D. program of UAB and is grateful to MEC for a FPU predoctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical control over the energy-level alignment in a two-terminal junction

  • Li, Yuan
  • Franco, Carlos
  • Crivillers, Núria
  • Mas Torrent, Marta
  • Liang, Cao
  • Suchand Sangeeth, C.S.
  • Rovira, Concepció
  • Veciana, Jaume
  • Nijhuis, Christian A.
The energy-level alignment of molecular transistors can be controlled by external gating to move molecular orbitals with respect to the Fermi levels of the source and drain electrodes. Two-terminal molecular tunnelling junctions, however, lack a gate electrode and suffer from Fermi-level pinning, making it difficult to control the energy-level alignment of the system. Here we report an enhancement of 2 orders of magnitude of the tunnelling current in a two-terminal junction via chemical molecular orbital control, changing chemically the molecular component between a stable radical and its non-radical form without altering the supramolecular structure of the junction. Our findings demonstrate that the energy-level alignment in self-assembled monolayer-based junctions can be regulated by purely chemical modifications, which seems an attractive alternative to control the electrical properties of two-terminal junctions., The National Research Foundation, Prime Minister’s Office, Singapore under its Medium sized centre programme, and for the NRF fellowship to C.A.N., award No. NRF-RF 2010-03, is kindly acknowledged for supporting this research. C.F., N.C., M.M.-T., C.R. and J.V. acknowledge the CSIC funded i-LINK0841project, the EU FP7 program through ACMOL collaborative project (GA n 618082), ERC StG 2012-306826 e-GAMES, CIG (PCIG10-GA-2011-303989) and ITN iSwitch (GA no. 642196), the financial support from the DGI (Spain) (CTQ2013-40480-R), Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496), the Generalitat de Catalunya (2014SGR-17) and the Networking Research Center of Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN); N.C. acknowledges the RyC program; C.F. is enroled in the Materials Science PhD program of UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High performing solution-coated electrolyte-gated organic fieldeffect transistors for aqueous media operation

  • Qiaoming, Zhang
  • Leonardi, Francesca
  • Casalini, Stefano
  • Temiño, Inés
  • Mas Torrent, Marta
Since the first demonstration, the electrolyte-gated organic field-effect transistors (EGOFETs) have immediately gained much attention for the development of cutting-edge technology and they are expected to have a strong impact in the field of (bio-)sensors. However EGOFETs directly expose their active material towards the aqueous media, hence a limited library of organic semiconductors is actually suitable. By using two mostly unexplored strategies in EGOFETs such as blended materials together with a printing technique, we have successfully widened this library. Our benchmarks were 6,13-bis(triisopropylsilylethynyl)pentacene and 2,8-difluoro-5,11-bis(triethylsilylethynyl) anthradithiophene (diF-TES-ADT), which have been firstly blended with polystyrene and secondly deposited by means of the bar-assisted meniscus shearing (BAMS) technique. Our approach yielded thin films (i.e. no thicker than 30 nm) suitable for organic electronics and stable in liquid environment. Up to date, these EGOFETs show unprecedented performances. Furthermore, an extremely harsh environment, like NaCl 1M, has been used in order to test the limit of operability of these electronic devices. Albeit an electrical worsening is observed, our devices can operate under different electrical stresses within the time frame of hours up to a week. In conclusion, our approach turns out to be a powerful tool for the EGOFET manufacturing., The authors thank the ERC StG 2012–306826 e-GAMES project, the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), the DGI (Spain) project BE-WELL CTQ2013-40480-R, the Generalitat de Catalunya (2014-SGR-17) and the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV- 2015-0496). Q. Z. acknowledges the China Scholarship Council, the National Natural Science Foundation (NSF) of China (Grant No. 11404266) and the Fundamental Research Funds for the Central Universities of China (Grant No. XDJK2014C081). Q. Z. And I. T. are enrolled in the Materials Science PhD Program of Universitat Autònoma de Barcelona. F.L. gratefully acknowledges the “Juan de la Cierva” programme. The research leading to these results has received funding from the People Programme (Marie Curie Actions) of the Seventh Framework Programme of the European Union (FP7/2007–2013) under REA grant agreement no.600388 (TECNIOSpring programme), and from the Agency for Business Competitiveness of the Government of Catalonia, ACCIÓ. The authors thank Dr. D. Gutierrez and Dr. S. Galindo for their assistance with the switching speed measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional protein-based nanomaterial produced in microorganisms recognized as safe: A new platform for biotechnology

  • Cano Garrido, Olivia
  • Giró Paradell, Irene
  • Tatkiewicz, Witold I.
  • Ratera, Immaculada
  • Veciana, Jaume
  • García Fruitós, Elena
Cano Garrido, Olivia et al., Inclusion bodies (IBs) are protein-based nanoparticles formed in Escherichia coli through stereospecific aggregation processes during the overexpression of recombinant proteins. In the last years, it has been shown that IBs can be used as nanostructured biomaterials to stimulate mammalian cell attachment, proliferation, and differentiation. In addition, these nanoparticles have also been explored as natural delivery systems for protein replacement therapies. Although the production of these protein-based nanomaterials in E. coli is economically viable, important safety concerns related to the presence of endotoxins in the products derived from this microorganism need to be addressed. Lactic acid bacteria (LAB) are a group of food-grade microorganisms that have been classified as safe by biologically regulatory agencies. In this context, we have demonstrated herein, for the first time, the production of fully functional, IB-like protein nanoparticles in LAB. These nanoparticles have been fully characterized using a wide range of techniques, including field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, zymography, cytometry, confocal microscopy, and wettability and cell coverage measurements. Our results allow us to conclude that these materials share the main physico-chemical characteristics with IBs from E. coli and moreover are devoid of any harmful endotoxin contaminant. These findings reveal a new platform for the production of protein-based safe products with high pharmaceutical interest., This work was supported by grants from INIA, MINECO, Spain to AA and EGF (RTA2012-00028-C02-02), from DGI to JV (BeWell CTQ2013-40480-R), from MINECO to EGF and IR (MAT2013-50036-EXP) and to ICMAB (Severo Ochoa Programme for Centres of Excellence in R&D – SEV – 2015-0496), from Agència de Gestió d’Ajuts Universitaris i de Recerca to AV and JV (2014SGR-132 and 2014-SGR-17, respectively) and from EU to JV, AV and IR (H2020-INFRAIA-2014-2015; NFFA-654360). Besides, the authors acknowledge the financial support granted to AV and JV from the Centro de Investigación Biomédica en Red (CIBER) de Bioingeniería, Biomateriales y Nanomedicina financed by the Instituto de Salud Carlos III with assistance from the European Regional Development. OCG and WIT received a PhD fellowship from MECD (FPU) and CSIC (JAE-pre), respectively, and EGF a post-doctoral fellowship from INIA (DOC-INIA). AV has been distinguished with an ICREA ACADEMIA Award. The authors also acknowledge Micalis Institute, INRA, France that kindly provide us the strain clpP− htrA−-NZ9000 (patent n° EP1141337B1/US6994997B1). We are also indebted to “Servei de Microscopia” (UAB) and ICTS “NANBIOSIS”, more specifically to the Protein Production Platform of CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN)/IBB, at the UAB SepBioES scientific-technical service (http://www.nanbiosis.es/unit/u1-protein-production-platform-ppp/). No other potential conflicts of interest were identified., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New fabrication method for producing reduced graphene oxide flexible electrodes by using a low-power visible laser diode engraving system

  • Chuquitarqui, Alex
  • Cotet, Liviu Cosmin
  • Baia, M.
  • Gyorgy, Eniko
  • Magyari, K.
  • Barbu-Tudoran, L.
  • Baia, L.
  • Díaz-González, M.
  • Fernández Sánchez, César
  • Pérez del Pino, Ángel
The fabrication of bendable electronic devices is a scientific-technological area of very rapid advance in which new materials and fabrication techniques are being continuously developed. In these kinds of devices, the fabrication of flexible conductive electrodes adherent to the substrate is a key factor. Further, eco-friendliness, low cost and fast production are essential requirements for the successful progress of new technologies. In this work, a novel method for obtaining graphene-based flexible electrodes is presented. Conductive films were obtained by means of the visible laser irradiation of graphene oxide layers deposited on polyethylene terephthalate substrates and self-standing membranes sandwiched between glass slides. Despite the low power of the laser system, the numerical simulations indicate the development of temperatures over 1000 K throughout the irradiated material. The laser-induced spatially confined heating leads to the reduction of the graphene oxide material, whereas the glass-based sandwich assembly avoids reoxidation from the surrounding air. By scanning and pixelated modes, reduced graphene oxide electrodes, up to 100 μm in thickness, and with a resistivity as low as 6 × 10−4 Ωm, were obtained in an easy and versatile way. Proof-of-concept microsupercapacitors and electrochemical sensors were fabricated with this technique, showing promising performance., The authors are grateful for the financial support of the Spanish Ministry of Economy, Industry and Competitiveness under the project ENE2017-89210-C2-1-R, and support from AGAUR of Generalitat de Catalunya through projects 2017 SGR 1086 and 2017 SGR 1771. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the 'Severo Ochoa' Programme for Centres of Excellence in R&D (SEV- 2015-0496). Also, this work was supported by a grant of the Romanian Ministry of Research and Innovation, CCCDI—UEFISCDI, project number PN-III-P1-1.2-PCCDI-2017-0350/01.03.2018 (Graphene4Life), within PNCDI III., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hetero-bimetallic paddlewheel clusters in coordination polymers formed by a water-induced single-crystal-to-single-crystal transformation

  • Albalad, Jorge
  • Aríñez-Soriano, Javier
  • Vidal Gancedo, José
  • Lloveras, Vega
  • Juanhuix, Jordi
  • Imaz, Inhar
  • Aliaga Alcalde, Nuria
  • Maspoch, Daniel
Herein we report a water-induced single-crystal to single-crystal transformation that involves the formation of hetero-bimetallic paddlewheel clusters in coordination polymers. Through this transformation, which involves the cleavage and formation of different coordination bonds, two different Cu(II)-Zn(II) and Cu(II)-Ni(II) paddle-wheel units exhibiting a 1 : 1 metal ratio were created., This work was supported by the Spanish MINECO (projects PN MAT2015-65354-C2-1-R and MAT2013-47869-C4-2-P), DGI grant BeWell (CTQ2013-40480-R), the Catalan AGAUR (project 2014-SGR-80 and 2014-SGR-17), and the ERC under the EU FP7 (ERC-Co 615954). J. A. thanks the Generalitat de Catalunya for a FI fellowship (2016FI B 00449). ICN2 and ICMAB acknowledge the support of the Spanish MINECO through the Severo Ochoa Centres of Excellence Programme, under Grants SEV-2013-0295 and SEV-2015-0496. The authors thank Dr N. Clos from the Serveis Cientifíco-Tècnics of the University of Barcelona for her assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of Ethylenedithio-MPTTF-PTM Radical Dyad as a Potential Neutral Radical Conductor

  • Souto Salom, Manuel
  • Bendixen, Dan
  • Jensen, Morten
  • Díez Cabanes, Valentín
  • Cornil, Jérôme
  • Jeppesen, Jan O.
  • Ratera, Immaculada
  • Rovira, Concepció
  • Veciana, Jaume
During the last years there has been a high interest in the development of new purely-organic single-component conductors. Very recently, we have reported a new neutral radical conductor based on the perchlorotriphenylmethyl (PTM) radical moiety linked to a monopyrrolotetrathiafulvalene (MPTTF) unit by a π-conjugated bridge (1) that behaves as a semiconductor under high pressure. With the aim of developing a new material with improved conducting properties, we have designed and synthesized the radical dyad 2 which was functionalized with an ethylenedithio (EDT) group in order to improve the intermolecular interactions of the tetrathiafulvalene (TTF) subunits. The physical properties of the new radical dyad 2 were studied in detail in solution to further analyze its electronic structure., This work was supported by the EU ITN iSwitch 642196 and “Nano2Fun” 607721 DGI grant (BeWell; CTQ2013-40480-R), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), and the Generalitat de Catalunya (grant 2014-SGR-17). ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). In Denmark, this work was supported by the Danish Council for Independent Research | Natural Sciences (#11-106744). M.S. is grateful to Spanish Ministerio de Educación, Cultura y Deporte for a FPU grant. We thank Vega Lloveras for ESR spectroscopy and Amable Bernabé for MALDI spectroscopy., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Attractive mechanical properties of a lightweight highly sensitive bi layer thermistor: polycarbonate/organic molecular conductor

  • Laukhina, Elena
  • Lebedev, Victor
  • Rovira, Concepció
  • Laukhin, Vladimir
  • Veciana, Jaume
The paper covers some of the basic mechanical characteristics of a recently developed bi layer thermistor: polycarbonate/(001) oriented layer of organic molecular conductor α’-(BEDT-TTF)2IxBr3-x, were BEDT-TTF=bis(ethylenedithio)tetrathiafulvalen. The nano and macro mechanical properties have been studied in order to use this flexible, low cost thermistor in sensing applications by proper way. The nano-mechanical properties of the temperature sensitive semiconducting layer of α’-(BEDT-TTF)2IxBr3-x were tested using nanoindentation method. The value of Young’s modulus in direction being perpendicular to the layer plan was found as 9.0 ±1.4 GPa. The macro mechanical properties of the thermistor were studied using a 5848 MicroTester. The tensile tests showed that basic mechanical characteristics of the thermistor are close to those of polycarbonate films. This indicates a good mechanical strength of the developed sensor. Therefore, the thermistor can be used in technologies that need to be instrumented with highly robustness lightweight low cost temperature sensors. The paper also reports synthetic details on fabricating temperature sensing e-textile. As the temperature control is becoming more and more important in biomedical technologies like healthcare monitoring, this work strongly contributes on the ongoing research on engineering sensitive conducting materials for biomedical applications., The authors acknowledge the financial support from Instituto de Salud Carlos III, through “Acciones CIBER.” The Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), an initiative funded by theVINational R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos IIIwith assistance from the European Regional Development Fund. The authors also appreciate the financial support through the projects: BE-WELL (CTQ2013–40480-R) granted by DGI (Spain), and GenCat (2014-SGR-17) financed by DGR (Catalunya), the European Commission’s Seventh Framework Programme for Research under contracts FP7-OCEAN-2013-614155., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly sensitive multi-layer pressure sensor with an active nanostructured layer of an organic molecular metal

  • Laukhin, Vladimir
  • Lebedev, Victor
  • Laukhina, Elena
  • Rovira, Concepció
  • Veciana, Jaume
This work addresses to the modern technologies that need to be instrumented with lightweight highly sensitive pressure sensors. The paper presents the development of a new plain flexible thin pressure sensor using a nanostructured layer of the highly sensitive organic piezoresistive metal β-(BEDT-TTF)2I3 as an active component; BEDT-TTF=bis (ethylenedithio)tetrathiafulvalene. The original construction approach permits one to operate the developed sensor on the principle of electrical resistance variations when its piezoresistive layer is elongated under a pressure increase. The pressure sensing element and a set of gold electrodes were integrated into one compact multi-layer design. The construction was optimized to enable one generic design for pressure ranges from 1 to 400 bar. The pressure tests showed that the sensor is able to control a small pressure change as a well definite electrical signal. So the developed type of the sensors is very attractive as a new generation of compact, lightweight, low-cost sensors that might monitor pressure with a good level of measurement accuracy., The authors acknowledge the financial support from Instituto de Salud Carlos III, through “Acciones CIBER.” The Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), an initiative funded by theVINational R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos IIIwith assistance from the European Regional Development Fund. The authors also appreciate the financial support through the projects: BE-WELL (CTQ2013–40480-R) granted by DGI (Spain), and GenCat (2014-SGR-17) financed by DGR (Catalunya), the European Commission’s Seventh Framework Programme for Research under contracts FP7-OCEAN-2013-614155., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charged versus Neutral Hydrogen-Bonded Complexes: Is There a Difference in the Nature of the Hydrogen Bonds?

  • Alkorta, Ibon
  • Mata, Ignasi
  • Molins, Elies
  • Espinosa, Enrique
A theoretical study on some carboxylic acid dimers formed by positively or negatively charged molecules has been carried out by using DFT methods. The resulting dimers possess either a charge of +2 or −2. In addition, the corresponding neutral complexes have also been considered. The electron density distribution described by the atoms in molecules and the natural bond orbital methods, as well as the electric field maps of the systems, have been analyzed and compared without finding significant differences between the neutral and ionic complexes. The interaction energy along the dissociation path of the charged dimers shows both a local minimum and a local maximum, defining a stability region between them. When this energetic profile is recalculated by removing the repulsion between the charged groups, it resembles to those of the neutral molecules. Hence, the characteristics of the charged dimers are similar to those of the neutral ones: the addition of a repulsion term for the charged groups permits to retrieve the energetic profiles dependence with the distance in the charged system. The interacting quantum atom (IQA) method has been used to calculate the interaction energy terms, including the classic Coulombic term between the whole molecules and the corresponding of the carboxylic acid groups. The IQA results show repulsive electrostatic interactions when the whole molecules are considered in the ionic complexes, but attractive ones between the carboxylic groups in both neutral and ionic complexes., This work was supported by the Spanish Ministerio de Economía y Competitividad (Grants CSD2007-00041, ENE2012-36368-C02-02, ENE2015-63969, SEV2015-0496 and CTQ2015-63997-C2-2-P), the Catalan Government (Grant PRC 2014SGR-1643), and the Autonomous Community of Madrid (S2013/MIT2841, Fotocarbon)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic stability against calcining of microwavesynthesized CoFe2O4 nanoparticles

  • Bartolomé, Elena
  • Cayado, Pablo
  • Ricart, Susagna
  • Gázquez, Jaume
  • Mundet, Bernat
  • Coll, Mariona
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Pellegrin, Eric
High quality CoFe2O4 nanoparticles were synthesized using a one-pot, microwave assisted method, that allows forming stable colloidal solutions in alcoholic solvents, as required for the preparation by Chemical Solution Deposition of hybrid nanocomposite ferromagnetic-high Tc YBa2Cu3O7 superconducting films or devices. We have investigated how the thermal process necessary for the preparation of such epitaxial nanocomposites, involving high temperatures (800 °C) and oxygen partial pressures (1 atm), affects the structure and magnetic properties of the isolated nanoparticles. The NPs were fully characterised by XRD, SQUID, STEM-EELS and XMCD at four different stages of the thermal process. Results show that, despite intermediate changes in the cation distribution occur during the process, the final NP magnetization is stable against the thermal treatment. This result opens up perspectives for the preparation of hybrid YBCO films with embedded magnetic NPs using low-cost chemical-solution methods, Authors acknowledge the MICIN (NANOSELECT, CSD2007-00041 and MAT2014-51778-C2-1-R and FEDER), Generalitat de Catalunya (2014SGR 753 and Xarmae), ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D (SEV-2015-0496), the CONSOLIDER Excellence Network (MAT2015-68994-REDC) and the EU (EU-FP7 NMP-LA-2012- 280432 EUROTAPES project). Electron microscopy performed at the Centro Nacional de Microscopı´a Electro´nica (UCM) was sponsored by the ERC Starting Investigator Award No. STEMOX#239739. J. G. and M. C. also acknowledge the Ramon y Cajal program (RYC-2012- 11709, RYC-2013-12448). The XMCD experiments were performed at the BOREAS beamline of the ALBA Synchrotron Light Facility with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In vivo testing of gold nanoparticles using the Caenorhabditis elegans model organism

  • González Moragas, Laura
  • Berto, Pascal
  • Vilches, Clara
  • Quidant, Romain
  • Kolovou, Androniki
  • Santarella-Mellwig, Rachel
  • Schwab, Yannick
  • Stürzenbaum, Stephen
  • Roig Serra, Anna
  • Laromaine, Anna
Gold nanoparticles (AuNPs) are present in many man-made products and cosmetics and are also used by the food and medical industries. Tight regulations regarding the use of mammalian animals for product testing can hamper the study of the specific interactions between engineered nanoparticles and biological systems. Invertebrate models, such as the nematode Caenorhabditis elegans (C. elegans), can offer alternative approaches during the early phases of nanoparticle discovery. Here, we thoroughly evaluated the biodistribution of 11-nm and 150-nm citrate-capped AuNPs in the model organism C. elegans at multiple scales, moving from micrometric to nanometric resolution and from the organismal to cellular level. We confirmed that the nanoparticles were not able to cross the intestinal and dermal barriers. We investigated the effect of AuNPs on the survival and reproductive performance of C. elegans, and correlated these effects with the uptake of AuNPs in terms of their number, surface area, and metal mass. In general, exposure to 11-nm AuNPs resulted in a higher toxicity than the larger 150-nm AuNPs. NP aggregation inside C. elegans was determined using absorbance microspectroscopy, which allowed the plasmonic properties of AuNPs to be correlated with their confinement inside the intestinal lumen, where anatomical traits, acidic pH and the presence of biomolecules play an essential role on NP aggregation. Finally, quantitative PCR of selected molecular markers indicated that exposure to AuNPs did not significantly affect endocytosis and intestinal barrier integrity., C. elegans N2 and E. coli OP50 were provided by the CGC, which is funded by NIH Office of Research Infrastructure Programs (P40 OD010440). This research was partially funded by the Spanish Ministry of Economy (MAT2015-64442-R, Ramon y Cajal program (AL, RyC-2010-06082), FPU program (LGM, FPU12/05549), Severo Ochoa Program (SEV-2015-0496) co-funded by European Social Funds), the Generalitat de Catalunya (2014SGR213), People Program of the European Commission (grant agreement no. 303630, co-funded by the European Social Fund), the Christian Boulin fellowship 2015 from EMBL (LGM), the COST Actions HINT (Action No. MP1202), and GENIE (Action No. BM1408-A). We acknowledge Víctor Fuentes for his collaboration in the synthesis of AuNPs. P. B., C. V. and R. Q. acknowledge the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522), Fundació Privada Cellex, and the CERCA Programme from the Generalitat de Catalunya. SRS acknowledges support by the RCUK (BBSRC – Biotechnology and Biological Sciences Research Council, grant BB/E025099/1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TTF–PTM dyads: from switched molecular self assembly in solution to radical conductors in solid state

  • Souto Salom, Manuel
  • Rovira, Concepció
  • Ratera, Immaculada
  • Veciana, Jaume
Organic donor-acceptor (D-A) systems formed by the electron-donor tetrathiafulvalene (TTF) linked to the electron-acceptor polychlorotriphenylmethyl (PTM) radical through different π-conjugated bridges exhibit interesting physical properties such as bistability in solution or conductivity in solid state. Understanding the interplay between intra- and intermolecular charge transfer processes in solution is of high interest in order to rationalize the self-assembling ability and conducting properties of such dyads in solid state. In this Highlight we go over the self-assembling properties of different TTF-π-PTM radical dyads that find potential applications as molecular switches or conductors in the field of molecular electronics., This work was supported by the EU Training Networks (ITN) “iSwitch” (GA No. 642196) and ‘‘NANO2FUN’’ (GA No. 607721) DGI (Spain) grant (BeWell; CTQ2013-40480-R), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), and the Generalitat de Catalunya (grant 2014- SGR-17). ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). M. S. is grateful to Spanish Ministerio de Educación, Cultura y Deporte for a FPU grant and he is enrolled in the Material Science Ph.D. program of UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Solution-Doped Polymer Semiconductor:Insulator Blend for Thermoelectrics

  • Kiefer, David
  • Liyang, Yu
  • Fransson, Erik
  • Gómez Rodríguez, Andrés
  • Primetzhofer, Daniel
  • Amassian, Aram
  • Campoy Quiles, Mariano
  • Müller, Christian
Poly(ethylene oxide) is demonstrated to be a suitable matrix polymer for the solution-doped conjugated polymer poly(3-hexylthiophene). The polarity of the insulator combined with carefully chosen processing conditions permits the fabrication of tens of micrometer-thick films that feature a fine distribution of the F4TCNQ dopant:semiconductor complex. Changes in electrical conductivity from 0.1 to 0.3 S cm−1 and Seebeck coefficient from 100 to 60 μV K−1 upon addition of the insulator correlate with an increase in doping efficiency from 20% to 40% for heavily doped ternary blends. An invariant bulk thermal conductivity of about 0.3 W m−1 K−1 gives rise to a thermoelectric Figure of merit ZT ∼ 10−4 that remains unaltered for an insulator content of more than 60 wt%. Free-standing, mechanically robust tapes illustrate the versatility of the developed dopant:semiconductor:insulator ternary blends., Financial support from the Swedish Research Council Formas, the Knut and Alice Wallenberg Foundation through a Wallenberg Academy Fellowship, the Foundation of Strategic Research (SSF) through a research infrastructure fellowship and the European Research Council (ERC) under grant agreements no. 637624 and 648901 is gratefully acknowledged. The authors thank Jason Ryan and Anders Mårtensson (Chalmers) for help with thermal conductivity and SEC measurements, Dr. Duc T. Duong (Stanford University) for advice on doping efficiency calculations and CHESS (supported by the NSF & NIH/NIGMS via NSF award DMR-1332208) for providing experimental time for GIWAXS measurements. M.C.Q. and A.G. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and project CSD2010–00044 (Consolider NANOTHERM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser-induced nanostructuration of vertically aligned carbon nanotubes coated with nickel oxide nanoparticles

  • Pérez del Pino, Ángel
  • Gyorgy, Eniko
  • Hussain, Shahzad
  • Andújar, José Luís
  • Pascual Miralles; Esther
  • Amade, Roger
  • Bertrán Serra, Enric
A versatile method is explored to decorate vertically aligned multi-walled carbon nanotubes (VACNTs) with NiO nanostructures. Multi-walled VACNTs are grown by plasma enhanced chemical vapor deposition and coated with NiO nanoparticles (NPs) by drop casting. After that, the system is submitted to nanosecond pulsed UV laser irradiation in atmospheric environment. Laser irradiation provokes rapid heating-melting-cooling processes which lead to the recrystallization of NiO NPs on the outer walls of VACNTs. In this way, and depending on the laser fluence and the number of accumulated pulses, different nano-architectures such as continuous NiO coatings and spiny features on VACNTs are obtained. High resolution scanning and transmission electron microscopies and Raman spectroscopy, corroborated with photothermal simulations, suggest that the grown nanostructures are mainly created by the laser-induced high temperatures (photothermal mechanisms). However, the observed reconstruction of the outer graphitic shells of VACNTs point to the catalytic action of NiO NPs, probably induced by the direct action of the laser radiation., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness under the projects MAT2010-20468, ENE2014-56109-C3-1-R and ENE2014-56109-C3-3-R, as well as AGAUR (Generalitat de Catalunya) under the project 2014SGR984. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). The authors would also like to thank the CCiT-UB for help with the structural and morphological characterization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of a minority monoclinic LaNiO2.5 phase in lanthanum nickelate thin films

  • López-Conesa, L.
  • Rebled, José Manuel
  • Pesquera, David
  • Dix, Nico
  • Sánchez Barrera, Florencio
  • Herranz, Gervasi
  • Fontcuberta, Josep
  • Peiró, Francesca
López-Conesa, L. et al., LaNiO3 (LNO) thin films of 14 nm and 35 nm thicknesses grown epitaxially on LaAlO3 (LAO) and (LaAlO3)0.3(Sr2TaAlO6)0.7 (LSAT) substrates are studied by High Resolution Transmission Electron Microscopy (HRTEM) and (High Angle Annular Dark Field (HAADF) imaging. The strain state of the films is studied by Geometric Phase Analysis (GPA). Results show the successful in-plane adaptation of the films to the substrates, both in the compressive (LAO) and tensile (LSAT) cases. Through the systematic analysis of HRTEM superstructure contrast modulation along different crystal orientations, localized regions of the monoclinic LaNiO2.5 phase are detected in the 35 nm films., LLC, JMR, SE and FP acknowledge financial support by the Spanish Government (projects MAT2013-41506 and CSD2009-2013). ICMAB activity has been sponsored by the Spanish MINECO (Project:MAT2014-56063-C02) and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)), and by Generalitat de Catalunya (2014 SGR 00734). TEM facilities at CCiT-UB, CEMES-CNRS and LMA-INA are also acknowledged., Peer reviewed