Pasar al contenido principal

FABRICACION AVANZADA DE ELECTRODOS HIBRIDOS BASADOS EN NANOCARBONO PARA APLICACIONES EN SUPERCONDENSADORES

ENE2017-89210-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New fabrication method for producing reduced graphene oxide flexible electrodes by using a low-power visible laser diode engraving system

  • Chuquitarqui, Alex
  • Cotet, Liviu Cosmin
  • Baia, M.
  • Gyorgy, Eniko
  • Magyari, K.
  • Barbu-Tudoran, L.
  • Baia, L.
  • Díaz-González, M.
  • Fernández Sánchez, César
  • Pérez del Pino, Ángel
The fabrication of bendable electronic devices is a scientific-technological area of very rapid advance in which new materials and fabrication techniques are being continuously developed. In these kinds of devices, the fabrication of flexible conductive electrodes adherent to the substrate is a key factor. Further, eco-friendliness, low cost and fast production are essential requirements for the successful progress of new technologies. In this work, a novel method for obtaining graphene-based flexible electrodes is presented. Conductive films were obtained by means of the visible laser irradiation of graphene oxide layers deposited on polyethylene terephthalate substrates and self-standing membranes sandwiched between glass slides. Despite the low power of the laser system, the numerical simulations indicate the development of temperatures over 1000 K throughout the irradiated material. The laser-induced spatially confined heating leads to the reduction of the graphene oxide material, whereas the glass-based sandwich assembly avoids reoxidation from the surrounding air. By scanning and pixelated modes, reduced graphene oxide electrodes, up to 100 μm in thickness, and with a resistivity as low as 6 × 10−4 Ωm, were obtained in an easy and versatile way. Proof-of-concept microsupercapacitors and electrochemical sensors were fabricated with this technique, showing promising performance., The authors are grateful for the financial support of the Spanish Ministry of Economy, Industry and Competitiveness under the project ENE2017-89210-C2-1-R, and support from AGAUR of Generalitat de Catalunya through projects 2017 SGR 1086 and 2017 SGR 1771. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the 'Severo Ochoa' Programme for Centres of Excellence in R&D (SEV- 2015-0496). Also, this work was supported by a grant of the Romanian Ministry of Research and Innovation, CCCDI—UEFISCDI, project number PN-III-P1-1.2-PCCDI-2017-0350/01.03.2018 (Graphene4Life), within PNCDI III., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reactive laser synthesis of nitrogen-doped hybrid graphene-based electrodes for energy storage

  • Pérez del Pino, Ángel
  • Martínez Villarroya, Andreu
  • Chuquitarqui, Alex
  • Logofatu, Constantin
  • Tonti, Dino
  • Gyorgy, Eniko
A versatile method based on the matrix assisted pulsed laser evaporation (MAPLE) technique was used for the fabrication of graphene-based electrodes for application in supercapacitors. The simultaneous deposition and chemical transformation of graphene oxide (GO) and GO–NiO nanoparticles was attained by including nitrogen-containing chemically reactive compounds (ammonia, urea and melamine) in aqueous MAPLE targets. Morphological analyses reveal the formation of hundreds of nanometres to tens of micrometres thick porous films on both plastic and metallic flexible substrates. Structural and compositional studies, carried out by transmission electron microscopy, and Raman and X-ray photoelectron spectroscopies, disclose significant deoxidation and nitrogen doping of the GO material. The electrodes reveal remarkable electrochemical performance, showing a maximum volumetric capacitance of 350 F cm 3 (9 mF cm 2 areal capacitance) in aqueous electrolyte. Symmetric supercapacitors fabricated with these electrodes reveal excellent long-term stability at high specific intensities. From the obtained results, it can be asserted that the reactive inverse MAPLE method stands out as a promising technology not only for the adaptable fabrication of flexible graphene-based composite electrodes but also for a wide variety of advanced functional materials for diverse applications., The authors are thankful for the nancial support of the Spanish Ministry of Economy, Industry and Competitiveness under project ENE2017-89210-C2-1-R, and support from AGAUR of Generalitat de Catalunya through project 2017 SGR 1086. ICMAB acknowledges nancial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015- 0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of graphene-based electrochemical capacitors through reactive inverse matrix assisted pulsed laser evaporation

  • Pérez del Pino, Ángel
  • Ramadan, Mohamed Ahmed
  • García Lebière, Pablo
  • Ivan, Raluca
  • Logofatu, Constantin
  • Yousef, Ibraheem
  • Gyorgy, Eniko
Electrodes constituted by nitrogen-doped reduced graphene oxide (NrGO) in combination with NiO nanostructures were fabricated by means of reactive inverse matrix assisted pulsed laser evaporation technique. The structure-composition of the electrode composites was tailored by laser-inducing chemical reactions of graphene oxide (GO) flakes with different precursor molecules (citric acid, ascorbic acid and imidazole) during GO deposition. Structural characterizations reveal the formation of wrinkles and nanoholes in the NrGO sheets, besides their coating with NiO nanostructures. Compositional studies disclose that imidazole precursor promotes the synthesis of NrGO with the largest degree of reduction and nitrogen doping (mainly with graphitic and pyridinic N). Electrochemical analyses of the obtained electrodes reveal that NiO nanostructures increase surface charge storage processes (double layer – pseudocapacitive) over diffusive ones, being the imidazole-based electrodes the ones exhibiting the best performance (up to 114 F cm−3 at 10 mV s−1). Symmetric and asymmetric electrochemical capacitors were also fabricated showing excellent robustness over 10,000 charge-discharge cycles at high specific currents., The authors thank the financial support of the Spanish Ministry of Economy, Industry and Competitiveness under the project ENE2017-89210-C2-1-R, and support from AGAUR of Generalitat de Catalunya through the project 2017 SGR 1086. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). FTIRM experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancement of the supercapacitive properties of laser deposited graphene-based electrodes through carbon nanotube loading and nitrogen doping

  • Pérez del Pino, Ángel
  • Rodríguez López, Marta
  • Ramadan, Mohamed Ahmed
  • García Lebière, Pablo
  • Logofatu, Constantin
  • Martínez Rovira, Immaculada
  • Yousef, Ibraheem
  • Gyorgy, Eniko
Several technological routes are being investigated for improving the energy storage capability and power delivery of electrochemical capacitors. In this work, ternary hybrid electrodes composed of conducting graphene/reduced graphene oxide (rGO), which store charge mainly through electric double-layer mechanisms, covered by NiO nanostructures, for adding pseudocapacitance, were fabricated through a matrix assisted pulsed laser evaporation technique. The incorporation of multiwall carbon nanotubes (MWCNTs) provokes an increase of the porosity and thus, a substantial enhancement of the electrodes’ capacitance (from 4 to 20 F cm−3 at 10 mV s−1). Volumetric capacitances of 34 F cm−3 were also obtained with electrodes containing just carbon nanotubes coated with NiO nanostructures. Moreover, the use of nitrogen containing precursors (ammonia, urea) for laser-induced N-doping of the nanocarbons also provokes a notable increase of the capacitance. Remarkably, N-containing groups in rGO–MWCNTs mainly add electric double layer charge storage, pointing to an increase of electrode porosity, whereas redox reactions contribute with a minor diffusion fraction. It was also observed that the loading of carbon nanotubes leads to an increase of diffusion-controlled charge storage mechanisms versus capacitive ones in rGO-based electrodes, the opposite effect being observed in graphene electrodes., The authors acknowledge the financial support of the Spanish Ministry of Economy, Industry and Competitiveness under the project ENE2017-89210-C2-1-R, and support from AGAUR of Generalitat de Catalunya through the project 2017 SGR 1086. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). FTIRM experiments were performed at the MIRAS beamline at the ALBA Synchrotron with the collaboration of ALBA staff. The authors acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective laser-assisted synthesis of tubular van der Waals heterostructures of single-layered PbI2 within carbon nanotubes exhibiting carrier photogeneration

  • Sandoval, Stefania
  • Kepić, Dejan
  • Pérez del Pino, Ángel
  • Gyorgy, Eniko
  • Gómez Rodríguez, Andrés
  • Pfannmoeller, Martin
  • Tendeloo, Gustaaf van
  • Ballesteros, Belén
  • Tobias, Gerard
The electronic and optical properties of two-dimensional layered materials allow the miniaturization of nanoelectronic and optoelectronic devices in a competitive manner. Even larger opportunities arise when two or more layers of different materials are combined. Here, we report on an ultrafast energy efficient strategy, using laser irradiation, which allows bulk synthesis of crystalline single-layered lead iodide in the cavities of carbon nanotubes by forming cylindrical van der Waals heterostructures. In contrast to the filling of van der Waals solids into carbon nanotubes by conventional thermal annealing, which favors the formation of inorganic nanowires, the present strategy is highly selective toward the growth of monolayers forming lead iodide nanotubes. The irradiated bulk material bearing the nanotubes reveals a decrease of the resistivity as well as a significant increase in the current flow upon illumination. Both effects are attributed to the presence of single-walled lead iodide nanotubes in the cavities of carbon nanotubes, which dominate the properties of the whole matrix. The present study brings in a simple, ultrafast and energy efficient strategy for the tailored synthesis of rolled-up single-layers of lead iodide (i.e., single-walled PbI2 nanotubes), which we believe could be expanded to other two-dimensional (2D) van der Waals solids. In fact, initial tests with ZnI2 already reveal the formation of single-walled ZnI2 nanotubes, thus proving the versatility of the approach., We acknowledge funding from MINECO (Spain), through MAT2017-86616-R, ENE2017-89210-C2-1-R, and “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV2015-0496, SEV-2013-0295), CERCA programme for funding ICN2 and support from AGAUR of Generalitat de Catalunya through the projects 2017 SGR 1086, 2017 SGR 581 and 2017 SGR 327.D.K. acknowledges financial support from the Ministry of Education, Science, and Technological Development of the Republic of Serbia for postdoctoral research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced UV-Vis Photodegradation of Nanocomposite Reduced Graphene Oxide/Ferrite Nanofiber Films Prepared by Laser-Assisted Evaporation

  • Queraltó, Albert
  • Gyorgy, Eniko
  • Ivan, Raluca
  • Pérez del Pino, Ángel
  • Frohnhoven, Robert
  • Mathur, Sanjay
© 2020 by the authors., Nanocomposite films of rGO/MFeO3 (M = Bi, La) nanofibers were grown by matrix-assisted pulsed laser evaporation of frozen target dispersions containing GO platelets and MFeO3 nanofibers. Electron microscopy investigations confirmed the successful fabrication of MFeO3 nanofibers by electrospinning Part of nanofibers were broken into shorter units, and spherical nanoparticles were formed during laser processing. Numerical simulations were performed in order to estimate the maximum temperature values reached by the nanofibers during laser irradiation. X-ray diffraction analyses revealed the formation of perovskite MFeO3 phase, whereas secondary phases of BiFeO3 could not be completely avoided, due to the high volatility of bismuth. XPS measurements disclosed the presence of metallic bismuth and Fe2+ for BiFeO3, whereas La2(CO3)3 and Fe2+ were observed in case of LaFeO3 nanofibers. High photocatalytic efficiencies for the degradation of methyl orange were achieved for nanocomposite films, both under UV and visible light irradiation conditions. Degradation values of up to 70% after 400 min irradiation were obtained for rGO/LaFeO3 nanocomposite thin layers, with weights below 10 µg, rGO platelets acting as reservoirs for photoelectrons generated at the surface of MFeO3., This research was funded by the ALEXANDER VON HUMBOLDT FOUNDATION AND THE GERMAN FEDERAL MINISTRY FOR EDUCATION AND RESEARCH (grant number AVH 1184642), UNIVERSITY OF COLOGNE, the SPANISH MINISTRY of ECONOMY, INDUSTRY AND COMPETITIVENESS (grant number ENE2017-89210-C2-1-R), AGAUR OF GENERALITAT DE CATALUNYA (grant number 2017 SGR 1086) and SEVERO OCHOA PROGRAMME FOR CENTRES OF EXCELLENCE IN R&D (grant number SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cost Effective Laser Processing of Graphene Oxide, Transition Metal Oxides and Alginate Composite for Hybrid Electrodes for Supercapacitors

  • García Lebière, Pablo
  • Koutsogianni, Afroditi
  • Gispert, Joaquim
  • Minguillon, Miquel
  • Pérez del Pino, Ángel
  • Gyorgy, Eniko
The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness under the project ENE2017-89210-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fabrication of Reduced Graphene Oxide Supercapacitor Electrodes Through Easily-scalable Laser-method

  • García Lebière, Pablo
  • Ponsa, Nil
  • Pérez del Pino, Ángel
  • Gyorgy, Eniko
The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness under the projects ENE2017-89210-C2-1-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon-based nanomaterials and ZnO ternary compound layers grown by laser technique for environmental and energy storage applications

  • Ivan, R.
  • Popescu, Catalina
  • Pérez del Pino, Ángel
  • Logofatu, Constantin
  • Gyorgy, Eniko
Carbon nanotube – highly reduced graphene oxide – transition metal oxide (ZnO) nanohybrid layers were synthesized using a one-step laser technique. Commercial multiwall carbon nanotubes (MWCNTs), graphene oxide (GO) platelets and ZnO nanoparticles were used as starting materials. We discuss the influence of carbon/metal oxide ratio on the physico-chemical properties of the nanohybrid layers, geometrical characteristics, shape and dimensions of constituent nanoentities, chemical composition and chemical bonding states, optical properties, UV–visible absorption, band gap values, as well as charge transfer properties. In the followings the relation between these properties and functional characteristics, removal of water contaminants, antibiotic molecules, and charge storage performances of the ternary, MWCNTs/reduced GO/ZnO layers are presented, identifying the optimum relative concentrations of the constituting nanomaterials. The high photocatalytic efficiencies both under UV and visible light irradiations, even after several consecutive degradation cycles, were attributed to effective separation of photogenerated charge carriers by carbon nanomaterials as well as formation of oxygen deficient ZnOx−1 nanocrystals. The enhanced charge storage capacity of ternary nanohybrid electrodes is based on combined electrochemical double layer capacitance and pseudocapacitance implying redox reactions on the surface and subsurface of the layers in contact with the electrolyte. Both functional properties are strongly influenced by the relative concentrations of the nanomaterials constituting the ternary layers., The authors thank the financial support of the Executive Unit for Financing Higher Education, Research, Development and Innovation of the Romanian Ministry of Education and Scientific Research under the contract PN-III-P4-ID-PCE-2016-0550, the Spanish Ministry of Economy, Industry and Competitiveness under the projects ENE2017-89210-C2-1-R, AEI/FEDER,EU. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser synthesis of TiO2–carbon nanomaterial layers with enhanced photodegradation efficiency towards antibiotics and dyes

  • Ivan, R.
  • Pérez del Pino, Ángel
  • Yousef, I.
  • Logofatu, Constantin
  • Gyorgy, Eniko
Graphene-based photocatalytic layers were prepared by reactive matrix assisted pulsed laser evaporation technique. Binary, nitrogen doped reduced graphene oxide (RGO)/TiO2 and ternary RGO/TiO2/graphitic carbon nitride (g-C3N4) compounds were synthesized and simultaneously deposited onto solid substrates. Aqueous dispersions of commercial graphene oxide platelets and TiO2 nanoparticles were prepared. NH3 or melamine powder was added to the dispersions to achieve enhanced nitrogen doping and synthesis of g-C3N4 during laser irradiation. The photocatalytic efficiency of the layers towards degradation of antibiotic, chloramphenicol and organic dye molecules was systematically investigated and correlated with structural, compositional, and morphological features. This study provides new insights into the importance of TiO2 crystal facets and the synergistic effects between TiO2 nanocrystals and the other constituents, nitrogen doped RGO and g-C3N4 of the hybrid layers. As a result of combined effect of constituent materials, TiO2, RGO, and g-C3N4 as well as N doping of RGO, through the generation of quaternary and pyrrolic N functionalities, the composite layers showed high photocatalytic efficiency for degradation of organic molecules. Stability and reusability experiments indicated that the composite layers maintain their high photodegradation efficiency towards organic molecules during consecutive degradation cycles. Active radical scavenging experiments were also carried out in order to determine the role of the main active species involved in the photocatalytic degradation process., The authors thank the financial support of the Executive Unit for Financing Higher Education, Research, Development and Innovation of the Romanian Ministry of Education and Scientific Research under the contract PN-III-P4-ID-PCE-2016-0550, the Spanish Ministry of Economy, Industry, and Competitiveness under the project ENE2017-89210-C2-1-R, AEI/FEDER,EU. ICMAB acknowledges financial support from the Spanish Ministry of Economy, Industry, and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). SR-FTIR experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff and CALIPSOplus (Grant 730872) funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser fabrication of hybrid electrodes composed of nanocarbons mixed with cerium and manganese oxides for supercapacitive energy storage

  • García Lebière, Pablo
  • Pérez del Pino, Ángel
  • Domènech Domingo, Guillem
  • Logofatu, Constantin
  • Martínez Rovira, Immaculada
  • Yousef, Ibraheem
  • Gyorgy, Eniko
Novel composite materials are being investigated for improving the energy storage performance of electrochemical capacitors. For this goal, synergistic effects via the combination of diverse types of materials are crucial. In this work, electrodes composed of reduced graphene oxide, multiwall carbon nanotubes, as well as cerium and manganese oxides were fabricated through reactive inverse matrix-assisted pulsed laser evaporation (RIMAPLE). UV-pulsed laser irradiation of frozen aqueous dispersions containing graphene oxide sheets, carbon nanotubes, and ceria nanoentities, besides manganese acetate precursor, led to the simultaneous chemical transformation and co-deposition of hybrid electrodes onto flexible metallic substrates via photothermal and photochemical processes. Thorough morphological and compositional studies of the electrodes demonstrated the laser-induced reduction of graphene oxide, besides the crystallization of a mixture of cerium and manganese oxide nanostructures decorating the carbon nanoentities during the deposition process. Electrochemical analyses revealed a remarkable improvement of performance with the combination of electrochemical double layer in the porous nanocarbon framework with pseudocapacitance from the oxide nanostructures, obtaining excellent volumetric capacitances of up to 140 F cm−3 at 10 mV s−1 with the combination of all four materials. The attained results are the best ones yet published regarding RIMAPLE of hybrid nanocarbon-based electrodes with micrometric thickness. Finally, symmetric electrochemical capacitors were fabricated using aqueous electrolyte, revealing excellent stability upon tens of thousands of charge–discharge cycles., The authors thank the financial support of the Spanish Ministry of Economy, Industry and Competitiveness under the project ENE2017-89210-C2-1-R and support from AGAUR of Generalitat de Catalunya through projects 2017 SGR 1086 and 2017 SGR 1771. PGL thanks the financial support of the Spanish Ministry of Economy, Industry and Competitiveness through the grant BES-2017-081652 for the formation of scientific researchers. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through Severo Ochoa FUNFUTURE (CEX2019-000917-S). The FTIRM experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boost of charge storage performance of graphene nanowalls electrodes by laser-induced crystallization of metal oxide nanostructures

  • Esqueda Barron, Yasmín
  • Pérez del Pino, Ángel
  • García Lebière, Pablo
  • Musheghyan Avetisyan, Arevik
  • Bertrán Serra, Enric
  • Gyorgy, Eniko
  • Logofatu, Constantin
Major research efforts are being carried out for the technological advancement to an energetically sustainable society. However, for the full commercial integration of electrochemical energy storage devices, not only materials with higher performance should be designed and manufactured but also more competitive production techniques need to be developed. The laser processing technology is well extended at the industrial sector for the versatile and high throughput modification of a wide range of materials. In this work, a method based on laser processing is presented for the fabrication of hybrid electrodes composed of graphene nanowalls (GNWs) coated with different transition-metal oxide nanostructures for electrochemical capacitor (EC) applications. GNW/stainless steel electrodes grown by plasma enhanced chemical vapor deposition were decorated with metal oxide nanostructures by means of their laser surface processing while immersed in aqueous organometallic solutions. The pseudocapacitive nature of the laser-induced crystallized oxide materials prompted an increase of the GNW electrodes’ capacitance by 3 orders of magnitude, up to ca. 28 F/cm3 at 10 mV/s, at both the positive and negative voltages. Finally, asymmetric aqueous and solid-state ECs revealed excellent stability upon tens of thousands of charge–discharge cycles., The authors are grateful for the financial support of the Spanish Ministry of Economy, Industry, and Competitiveness under the projects ENE2017-89210-C2-1-R and ENE2017-89210-C2-2-R and support from AGAUR of Generalitat de Catalunya through projects 2017 SGR 1086. ICMAB acknowledges the financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (CEX2019-000917-S). Y.E.B acknowledges the financial support from CONACyT—Mexico through the postdoctoral scholarship granted 740661. P.G.L thanks the financial support of the Spanish Ministry of Economy, Industry, and Competitiveness through the grant BES-2017-081652 for the formation of scientific researchers. The authors acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser synthesis of NixZnyO/reduced graphene oxide/carbon nanotube electrodes for energy storage applications

  • García Lebière, Pablo
  • Pérez del Pino, Ángel
  • Logofatu, Constantin
  • Gyorgy, Eniko
Porous multicomponent surface layers consisting of bimetallic oxide nanoparticles, carbon nanomaterials reduced graphene oxide (GO) and multiwall carbon nanotubes (MWCNTs) were prepared by reactive inverse matrix assisted pulsed laser evaporation. The layers were tested as electrodes for supercapacitor devices. Bimetallic oxide nanoparticles were grown through the mixing of simple inorganic oxides and organic compounds in distilled water. A frequency quadrupled Nd:YAG laser was used for the irradiation of the target dispersions consisting of GO platelets, MWCNTs, NiO, and Zn acetate. Besides oxide nanoparticles synthesis, which were present both on the surface of GO platelets and MWCTs and were also encapsulated within the MWCNTs walls, the GO platelets used for the preparation of the target dispersion were reduced under the effect of the laser pulses. An enhancement of the electrochemical performances of the nanohybrid electrodes were obtained as a results of the formation of bimetallic oxide nanoparticles. The electrodes exhibit fast charge–discharge cycling rate and improved storage capacity as compared to compound layer counterparts containing carbon nanomaterials, reduced graphene oxide, carbon nanotubes and simple binary transition metal oxide nanoparticles, 40F/cm3 volumetric capacitance at 10 mV/s scan rate, 1.5 mW/cm3 energy density and 12 W/cm3 power density at 4 mA/cm3 current density., The authors thank the financial support of the Spanish Ministry of Economy, Industry and Competitiveness under the project ENE2017-89210-C2-1-R, AEI/FEDER,EU. PGL thanks the financial support of the Spanish Ministry of Economy, Industry and Competitiveness through the grant BES-2017-081652 for the formation of scientific researchers. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhancement of the supercapacitive properties of laser deposited graphene-based electrodes through carbon nanotube loading and nitrogen doping

  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • Rodríguez López, Marta
  • Ramadan, Mohamed Ahmed|||0000-0001-9792-6675
  • García Lebière, Pablo
  • Logofatu, Constantin
  • Martínez-Rovira, Immaculada|||0000-0002-2918-489X
  • Yousef, Ibraheem|||0000-0001-7818-8611
  • Gyorgy, Eniko|||0000-0001-6311-5823
Several technological routes are being investigated for improving the energy storage capability and power delivery of electrochemical capacitors. In this work, ternary hybrid electrodes composed of conducting graphene/reduced graphene oxide (rGO), which store charge mainly through electric double-layer mechanisms, covered by NiO nanostructures, for adding pseudocapacitance, were fabricated through a matrix assisted pulsed laser evaporation technique. The incorporation of multiwall carbon nanotubes (MWCNTs) provokes an increase of the porosity and thus, a substantial enhancement of the electrodes' capacitance (from 4 to 20 F cm at 10 mV s). Volumetric capacitances of 34 F cm were also obtained with electrodes containing just carbon nanotubes coated with NiO nanostructures. Moreover, the use of nitrogen containing precursors (ammonia, urea) for laser-induced N-doping of the nanocarbons also provokes a notable increase of the capacitance. Remarkably, N-containing groups in rGO-MWCNTs mainly add electric double layer charge storage, pointing to an increase of electrode porosity, whereas redox reactions contribute with a minor diffusion fraction. It was also observed that the loading of carbon nanotubes leads to an increase of diffusion-controlled charge storage mechanisms versus capacitive ones in rGO-based electrodes, the opposite effect being observed in graphene electrodes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Selective Laser-Assisted Synthesis of Tubular van der Waals Heterostructures of Single-Layered PbI2 within Carbon Nanotubes Exhibiting Carrier Photogeneration

  • Sandoval, Stefania|||0000-0002-0050-7501
  • Kepić, Dejan|||0000-0003-2777-6864
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • Gyorgy, Eniko|||0000-0001-6311-5823
  • Gómez, Andrés|||0000-0003-2847-0138
  • Pfannmoeller, Martin|||0000-0002-0910-1591
  • Tendeloo, Gustaaf V.
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Tobias, Gerard|||0000-0001-7116-2152
The electronic and optical properties of two-dimensional layered materials allow the miniaturization of nanoelectronic and optoelectronic devices in a competitive manner. Even larger opportunities arise when two or more layers of different materials are combined. Here, we report on an ultrafast energy efficient strategy, using laser irradiation, which allows bulk synthesis of crystalline single-layered lead iodide in the cavities of carbon nanotubes by forming cylindrical van der Waals heterostructures. In contrast to the filling of van der Waals solids into carbon nanotubes by conventional thermal annealing, which favors the formation of inorganic nanowires, the present strategy is highly selective toward the growth of monolayers forming lead iodide nanotubes. The irradiated bulk material bearing the nanotubes reveals a decrease of the resistivity as well as a significant increase in the current flow upon illumination. Both effects are attributed to the presence of single-walled lead iodide nanotubes in the cavities of carbon nanotubes, which dominate the properties of the whole matrix. The present study brings in a simple, ultrafast and energy efficient strategy for the tailored synthesis of rolled-up single-layers of lead iodide (i.e., single-walled PbI nanotubes), which we believe could be expanded to other two-dimensional (2D) van der Waals solids. In fact, initial tests with ZnI already reveal the formation of single-walled ZnI nanotubes, thus proving the versatility of the approach.