Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 129
Encontrada(s) 2 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Xue, Qian
  • Han, Xu|||0000-0001-8319-8830
  • Xing, Congcong|||0000-0001-7674-6720
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Zuo, Yong|||0000-0003-1564-467X
  • Du, Ruifeng
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Is Soft Carbon a More Suitable Match for SiOx in Li-Ion Battery Anodes?

  • Sun, Qing|||0000-0002-9145-7772
  • Zeng, Guifang|||0000-0002-5927-4730
  • Li, Jing|||0000-0002-9283-3821
  • Wang, Shang
  • Botifoll, Marc|||0000-0002-4876-6393
  • Wang, Hao
  • Li, Deping
  • Ji, Fengjun
  • Cheng, Jun
  • Shao, Huaiyu
  • Tian, Yanhong
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Ci, Lijie|||0000-0002-1759-105X
Silicon oxide (SiOx), inheriting the high-capacity characteristic of silicon-based materials but possessing superior cycling stability, is a promising anode material for next-generation Li-ion batteries. SiOx is typically applied in combination with graphite (Gr), but the limited cycling durability of the SiOx/Gr composites curtails large-scale applications. In this work, this limited durability is demonstrated in part related to the presence of a bidirectional diffusion at the SiOx/Gr interface, which is driven by their intrinsic working potential differences and the concentration gradients. When Li on the Li-rich surface of SiOx is captured by Gr, the SiOx surface shrinks, hindering further lithiation. The use of soft carbon (SC) instead of Gr can prevent such instability is further demonstrated. The higher working potential of SC avoids bidirectional diffusion and surface compression thus allowing further lithiation. In this scenario, the evolution of the Li concentration gradient in SiOx conforms to its spontaneous lithiation process, benefiting the electrochemical performance. These results highlight the focus on the working potential of carbon as a strategy for rational optimization of SiOx/C composites toward improved battery performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Palladium Hydride on C2N to Boost Formate Oxidation

  • Wang, Xiang
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Han, Xu|||0000-0001-8319-8830
  • Yu, Jing|||0000-0002-7620-745X
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liang, Zhifu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Li, Junshan|||0000-0002-1482-1972
The lack of electrocatalysts for the formate oxidation reaction (FOR) hampers the deployment of direct formate fuel cells (DFFCs). To overcome this limitation, herein, we detail the production of palladium hydride particles supported on CN (PdH@CN) via a facile method. PdH@CN displays excellent FOR performance, reaching current densities up to 5.6 A·mg and stable cycling and chronoamperometric operation. The Pd lattice expands due to the hydrogen intercalation. Besides, an electronic redistribution associated with the distinct electronegativity of Pd and H is observed. Both phenomena modify the electron energy levels, enhancing the activity and stability of the composite catalyst. More specifically, differential functional theory calculations show H intercalation to downshift the Pd d-band center in Pd@CN, weakening adsorbate binding and accelerating the FOR rate-determining step.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Translational Boundaries as Incipient Ferrielectric Domains in Antiferroelectric PbZrO3

  • Liu, Ying|||0000-0002-1262-2590
  • Niu, Ranming|||0000-0001-8190-552X
  • Majchrowski, Andrzej|||0000-0003-1078-418X
  • Roleder, Krystian|||0000-0002-2116-2362
  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Cairney, Julie M.|||0000-0003-4564-2675
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Catalan, Gustau|||0000-0003-0214-4828
In the archetypal antiferroelectric PbZrO3, antiparallel electric dipoles cancel each other, resulting in zero spontaneous polarization at the macroscopic level. Yet in actual hysteresis loops, the cancellation is rarely perfect and some remnant polarization is often observed, suggesting the metastability of polar phases in this material. In this work, using aberration-corrected scanning transmission electron microscopy methods on a PbZrO3 single crystal, we uncover the coexistence of the common antiferroelectric phase and a ferrielectric phase featuring an electric dipole pattern of ↓↑↓. This dipole arrangement, predicted by Aramberri et al. to be the ground state of PbZrO3 at 0 K, appears at room temperature in the form of translational boundaries. The dual nature of the ferrielectric phase, both a distinct phase and a translational boundary structure, places important symmetry constraints on its growth. These are overcome by sideways motion of the boundaries, which aggregate to form arbitrarily wide stripe domains of the polar phase embedded within the antiferroelectric matrix.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A CrMnFeCoNi high entropy alloy boosting oxygen evolution/reduction reactions and zinc-air battery performance

  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Zhang, Yu|||0000-0002-0332-0013
  • Wang, Xiang
  • Lee, Seungho|||0000-0002-6962-8598
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Lingxiao|||0000-0003-1628-2738
  • Liang, Zhifu
  • Chen, Jingwei
  • Li, Junshan|||0000-0002-1482-1972
  • Ostovari Moghaddam, Ahmad|||0000-0002-5316-3773
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Xu, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of cost-effective, high-activity and stable bifunctional catalysts for the oxygen reduction and evolution reactions (ORR/OER) is essential for zinc-air batteries (ZABs) to reach the market. Such catalysts must contain multiple adsorption/reaction sites to cope with the high demands of reversible oxygen electrodes. Herein, we propose a high entropy alloy (HEA) based on relatively abundant elements as a bifunctional ORR/OER catalyst. More specifically, we detail the synthesis of a CrMnFeCoNi HEA through a low-temperature solution-based approach. Such HEA displays superior OER performance with an overpotential of 265 mV at a current density of 10 mA/cm, and a 37.9 mV/dec Tafel slope, well above the properties of a standard commercial catalyst based on RuO. This high performance is partially explained by the presence of twinned defects, the incidence of large lattice distortions, and the electronic synergy between the different components, being Cr key to decreasing the energy barrier of the OER rate-determining step. CrMnFeCoNi also displays superior ORR performance with a half-potential of 0.78 V and an onset potential of 0.88 V, comparable with commercial Pt/C. The potential gap (Egap) between the OER overpotential and the ORR half-potential of CrMnFeCoNi is just 0.734 V. Taking advantage of these outstanding properties, ZABs are assembled using the CrMnFeCoNi HEA as air cathode and a zinc foil as the anode. The assembled cells provide an open-circuit voltage of 1.489 V, i.e. 90% of its theoretical limit (1.66 V), a peak power density of 116.5 mW/cm, and a specific capacity of 836 mAh/g that stays stable for more than 10 days of continuous cycling, i.e. 720 cycles @ 8 mA/cm and 16.6 days of continuous cycling, i.e. 1200 cycles @ 5 mA/cm.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Thermoelectric Performance of Surface-Engineered Cu1.5-xTe-Cu2Se Nanocomposites

  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Yu|||0000-0002-0332-0013
  • Xiao, Ke
  • Han, Xu|||0000-0001-8319-8830
  • Liu, Yu|||0000-0001-7313-6740
  • Nan, Bingfei|||0000-0002-7128-6056
  • Garcia Ramon, Maria|||0000-0003-1097-1639
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Poudel, Bed|||0000-0001-7760-2016
  • Nozariasbmarz, Amin|||0000-0003-2789-9469
  • Li, Wenjie|||0000-0003-4509-3303
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
CuS and CuSe have recently been reported as promising thermoelectric (TE) materials for medium-temperature applications. In contrast, CuTe, another member of the copper chalcogenide family, typically exhibits low Seebeck coefficients that limit its potential to achieve a superior thermoelectric figure of merit, zT, particularly in the low-temperature range where this material could be effective. To address this, we investigated the TE performance of CuTe-CuSe nanocomposites by consolidating surface-engineered CuTe nanocrystals. This surface engineering strategy allows for precise adjustment of Cu/Te ratios and results in a reversible phase transition at around 600 K in CuTe-CuSe nanocomposites, as systematically confirmed by in situ high-temperature X-ray diffraction combined with differential scanning calorimetry analysis. The phase transition leads to a conversion from metallic-like to semiconducting-like TE properties. Additionally, a layer of CuSe generated around CuTe nanoparticles effectively inhibits CuTe grain growth, minimizing thermal conductivity and decreasing hole concentration. These properties indicate that copper telluride based compounds have a promising thermoelectric potential, translated into a high dimensionless zT of 1.3 at 560 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tailoring the Architecture of Cationic Polymer Brush-Modified Carbon Nanotubes for Efficient siRNA Delivery in Cancer Immunotherapy

  • Li, Danyang
  • Ahmed, Momina
  • Khan, Anisah
  • Xu, Lizhou|||0000-0001-5983-4059
  • Walters, Adam A.
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Al-Jamal, Khuloud T.|||0000-0001-5165-2699
The facile and controlled fabrication of homogeneously grafted cationic polymers on carbon nanotubes (CNTs) remains poorly investigated, which further hinders the understanding of interactions between functionalized CNTs with different nucleic acids and the rational design of appropriate gene delivery vehicles. Herein, we describe the controlled grafting of cationic poly(2-dimethylaminoethylmethacrylate) brushes on CNTs via surface-initiated atom transfer radical polymerization integrated with mussel-inspired polydopamine chemistry. The binding of nucleic acids with different brush-CNT hybrids discloses the highly architectural-dependent behavior with dense short brush-coated CNTs displaying the highest binding among all the other hybrids, namely, dense long, sparse long, and sparse short brush-coated CNTs. Additionally, different chemistries of the brush coatings were shown to influence the biocompatibility, cellular uptake, and silencing efficiency in vitro. This platform provides great flexibility for the design of polymer brush-CNT hybrids with precise control over their structure-activity relationship for the rational design of nucleic acid delivery systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Colloidal synthesis of CsX nanocrystals (X = Cl, Br, I)

  • Shaw, Peter J.
  • Meyns, Michaela|||0000-0003-2476-9001
  • Zuo, Yong|||0000-0003-1564-467X
  • Grau Carbonell, Albert
  • Lagoudakis, Pavlos G.
  • Charlton, Martin D. B.
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kanaras, Antonios G.
A facile colloidal synthesis of highly ionic cesium halide nanocrystals is reported. Colloidal nanocrystals of CsI, CsCl and CsBr with unprecedentedly small dimensions are obtained using oleylammonium halides and cesium oleate as precursors. The ease and adaptability of our method enables its universalization for the formation of other highly ionic nanocrystals.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Selectivity Map for Molecular Beam Epitaxy of Advanced III-V Quantum Nanowire Networks

  • Aseev, Pavel|||0000-0003-0343-9302
  • Fursina, Alexandra
  • Boekhout, Frenk
  • Krizek, Filip
  • Sestoft, Joachim E.
  • Borsoi, Francesco|||0000-0001-9398-7614
  • Heedt, Sebastian
  • Wang, Guanzhong
  • Binci, Luca
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Swoboda, Timm
  • Koops, René
  • Uccelli, Emanuele
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Krogstrup, Peter|||0000-0002-1930-8553
  • Kouwenhoven, Leo P.
  • Caroff, Philippe
Selective-area growth is a promising technique for enabling of the fabrication of the scalable III-V nanowire networks required to test proposals for Majorana-based quantum computing devices. However, the contours of the growth parameter window resulting in selective growth remain undefined. Herein, we present a set of experimental techniques that unambiguously establish the parameter space window resulting in selective III-V nanowire networks growth by molecular beam epitaxy. Selectivity maps are constructed for both GaAs and InAs compounds based on in situ characterization of growth kinetics on GaAs(001) substrates, where the difference in group III adatom desorption rates between the III-V surface and the amorphous mask area is identified as the primary mechanism governing selectivity. The broad applicability of this method is demonstrated by the successful realization of high-quality InAs and GaAs nanowire networks on GaAs, InP, and InAs substrates of both (001) and (111)B orientations as well as homoepitaxial InSb nanowire networks. Finally, phase coherence in Aharonov-Bohm ring experiments validates the potential of these crystals for nanoelectronics and quantum transport applications. This work should enable faster and better nanoscale crystal engineering over a range of compound semiconductors for improved device performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Template-Assisted Scalable Nanowire Networks

  • Friedl, Martin
  • Cerveny, Kris
  • Weigele, Pirmin
  • Tütüncüoglu, Gözde
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Huang, Chunyi
  • Patlatiuk, Taras
  • Potts, Heidi A.
  • Sun, Zhiyuan|||0000-0003-3981-9083
  • Hill, Megan O.|||0000-0002-7663-7986
  • Güniat, Lucas|||0000-0001-7883-4433
  • Kim, Wonjong
  • Zamani, Mahdi|||0000-0003-0750-2938
  • Dubrovskii, Vladimir G.|||0000-0003-2088-7158
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Lauhon, Lincoln J.|||0000-0001-6046-3304
  • Zumbühl, Dominik M.
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
Topological qubits based on Majorana Fermions have the potential to revolutionize the emerging field of quantum computing by making information processing significantly more robust to decoherence. Nanowires are a promising medium for hosting these kinds of qubits, though branched nanowires are needed to perform qubit manipulations. Here we report a gold-free templated growth of III-V nanowires by molecular beam epitaxy using an approach that enables patternable and highly regular branched nanowire arrays on a far greater scale than what has been reported thus far. Our approach relies on the lattice-mismatched growth of InAs on top of defect-free GaAs nanomembranes yielding laterally oriented, low-defect InAs and InGaAs nanowires whose shapes are determined by surface and strain energy minimization. By controlling nanomembrane width and growth time, we demonstrate the formation of compositionally graded nanowires with cross-sections less than 50 nm. Scaling the nanowires below 20 nm leads to the formation of homogeneous InGaAs nanowires, which exhibit phase-coherent, quasi-1D quantum transport as shown by magnetoconductance measurements. These results are an important advance toward scalable topological quantum computing.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the role of ceria in Ni-Al₂O₃ catalyst for CO₂ plasma methanation

  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Guilera, Jordi
  • Zhang, Ting
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Andreu, Teresa|||0000-0002-2804-4545
The effect of Ce loading content on Ni-CeO₂/Ni-Al₂O₃ catalysts for CO₂ plasma methanation was evaluated. Catalysts were prepared by one-pot evaporation-induced self-assembly, Ni content was fixed at 15 wt. %, while CeO₂ ranged 0-50 wt. %. The catalysts performances were tested under atmospheric pressure in two operation modes, thermal- and plasma-catalysis. As for conventional thermal catalysis, the catalyst was thermally activated between 200 and 400 °C; while in plasma-catalysis, the catalyst was activated by plasma generated by a dielectric barrier discharges (DBD) reactor. By the application of plasma in the catalyst bed, the reaction temperature was reduced from 350 °C to 150 °C to obtain the same level of conversion than thermal-catalysis. In addition, the incorporation of Ce in Ni-CeO₂/Ni-Al₂O₃ led to an improvement of the catalytic performance in both thermal- and plasma-catalysis. Nevertheless, divergences on the optimum Ce content were found. On plasma experiments, the catalyst was more active at a lower amount of CeO₂ (˜10 wt.%) with respect to thermal catalysis (˜40 wt.%), reducing the catalyst fabrication cost. Those differences highlights that the CO generated by plasma CO₂ dissociation has a significant role for methane production, and thus the need to consider the by-products as reactant for the optimization of catalysts composition for DBD plasma-catalysis.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optical emission of GaN/AlN quantum-wires-the role of charge transfer from a nanowire template

  • Müßener, Jan
  • Greif, Ludwig A. Th.
  • Kalinowski, Stefan
  • Callsen, Gordon|||0000-0001-6390-3977
  • Hille, Pascal
  • Schörmann, Jörg
  • Wagner, Markus R..|||0000-0002-7367-5629
  • Schliwa, Andrei
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hoffmann, Axel
  • Eickhoff, Martin
We show that one-dimensional (1d) GaN quantum-wires (QWRs) exhibit intense and spectrally sharp emission lines. These QWRs are realized in an entirely self-assembled growth process by molecular beam epitaxy (MBE) on the side facets of GaN/AlN nanowire (NW) heterostructures. Time-integrated and time-resolved photoluminescence (PL) data in combination with numerical calculations allow the identification and assignment of the manifold emission features to three different spatial recombination centers within the NWs. The recombination processes in the QWRs are driven by efficient charge carrier transfer effects between the different optically active regions, providing high intense QWR luminescence despite their small volume. This is deduced by a fast rise time of the QWR PL, which is similar to the fast decay-time of adjacent carrier reservoirs. Such processes, feeding the ultra-narrow QWRs with carriers from the relatively large NWs, can be the key feature towards the realization of future QWR-based devices. While processing of single quantum structures with diameters in the nm range presents a serious obstacle with respect to their integration into electronic or photonic devices, the QWRs presented here can be analyzed and processed using existing techniques developed for single NWs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Triphenyl phosphite as the phosphorus source for the scalable and cost-effective production of transition metal phosphides

  • Liu, Junfeng|||0000-0003-3164-6472
  • Meyns, Michaela|||0000-0003-2476-9001
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Shavel, Alexey|||0000-0002-3995-0391
Transition metal phosphides have great potential to optimize a number of functionalities in several energy conversion and storage applications, particularly when nanostructured or in nanoparticle form. However, the synthesis of transition metal phosphide nanoparticles and its scalability is often limited by the toxicity, air sensitivity, and high cost of the reagents used. We present here a simple, scalable, and cost-effective "heating up" procedure to produce metal phosphides using inexpensive, low-toxicity, and air-stable triphenyl phosphite as source of phosphorus and chlorides as metal precursors. This procedure allows the synthesis of a variety of phosphide nanoparticles, including phosphides of Ni, Co, and Cu. The use of carbonyl metal precursors further allowed the synthesis of FeP and MoP nanoparticles. The fact that minor modifications in the experimental parameters allowed producing nanoparticles with different compositions and even to tune their size and shape shows the high potential and versatility of the triphenyl phosphite precursor and the presented method. We also detail here a methodology to displace organic ligands from the surface of phosphide nanoparticles, which is a key step toward their application in energy conversion and storage systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Supported Mn₃O₄ nanosystems for hydrogen production through ethanol photoreforming

  • Barreca, Davide|||0000-0002-8779-3386
  • Bigiani, Lorenzo|||0000-0001-7404-2340
  • Monai, Mateo
  • Carraro, Giorgio
  • Gasparotto, Alberto|||0000-0003-4626-651X
  • Sada, Cinzia|||0000-0002-7607-0481
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Grau Carbonell, Albert
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Maccato, Chiara|||0000-0001-6368-5754
  • Fornasiero, Paolo|||0000-0003-1082-9157
Photoreforming promoted by metal oxide nanophotocatalysts is an attractive route for clean and sustainable hydrogen generation. In the present work, we propose for the first time the use of supported MnO nanosystems, both pure and functionalized with Au nanoparticles (NPs), for hydrogen generation by photoreforming. The target oxide systems, prepared by chemical vapor deposition (CVD) and decorated with gold NPs by radio frequency (RF) sputtering, were subjected to a thorough chemico-physical characterization and utilized for a proof-of-concept H₂ generation in aqueous ethanolic solutions under simulated solar illumination. Pure MnO nanosystems yielded a constant hydrogen production rate of 10 mmol h⁻¹ m⁻² even for irradiation times up to 20 h. The introduction of Au NPs yielded a significant enhancement in photocatalytic activity, which decreased as a function of irradiation time. The main phenomena causing the Au-containing photocatalyst deactivation have been investigated by morphological and compositional analysis, providing important insights for the design of Mn₃O₄-based photocatalysts with improved performances.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The Role of polarity in nonplanar semiconductor nanostructures

  • De La Mata, Maria|||0000-0002-1581-4838
  • Zamani, Reza|||0000-0001-6940-0000
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Eickhoff, Martin
  • Xiong, Qihua|||0000-0002-2555-4363
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
  • Caroff, Philippe
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The lack of mirror symmetry in binary semiconductor compounds turns them into polar materials, where two opposite orientations of the same crystallographic direction are possible. Interestingly, their physical properties (e.g., electronic or photonic) and morphological features (e.g., shape, growth direction, and so forth) also strongly depend on the polarity. It has been observed that nanoscale materials tend to grow with a specific polarity, which can eventually be reversed for very specific growth conditions. In addition, polar-directed growth affects the defect density and topology and might induce eventually the formation of undesirable polarity inversion domains in the nanostructure, which in turn will affect the photonic and electronic final device performance. Here, we present a review on the polarity-driven growth mechanism at the nanoscale, combining our latest investigation with an overview of the available literature highlighting suitable future possibilities of polarity engineering of semiconductor nanostructures. The present study has been extended over a wide range of semiconductor compounds, covering the most commonly synthesized III-V (GaN, GaP, GaAs, GaSb, InN, InP, InAs, InSb) and II-VI (ZnO, ZnTe, CdS, CdSe, CdTe) nanowires and other free-standing nanostructures (tripods, tetrapods, belts, and membranes). This systematic study allowed us to explore the parameters that may induce polarity-dependent and polarity-driven growth mechanisms, as well as the polarity-related consequences on the physical properties of the nanostructures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Compositionally tuned NixSn alloys as anode materials for lithium-ion and sodium-ion batteries with a high pseudocapacitive contribution

  • Li, Junshan|||0000-0002-1482-1972
  • Xu, Xijun
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Nickel tin alloy nanoparticles (NPs) with tuned composition NixSn (0.6 ≤ x ≤ 1.9) were synthesized by a solution-based procedure and used as anode materials for Li-ion batteries (LIBs) and Na-ion batteries (SIBs). Among the compositions tested, Ni₀₉Sn-based electrodes exhibited the best performance in both LIBs and SIBs. As LIB anodes, Ni₀₉Sn-based electrodes delivered charge-discharge capacities of 980 mAh g⁻¹ after 340 cycles at 0.2 A g⁻¹ rate, which surpassed their maximum theoretical capacity considering that only Sn is lithiated. A kinetic characterization of the charge-discharge process demonstrated the electrode performance to be aided by a significant pseudocapacitive contribution that compensated for the loss of energy storage capacity associated to the solid-electrolyte interphase formation. This significant pseudocapacitive contribution, which not only translated into higher capacities but also longer durability, was associated to the small size of the crystal domains and the proper electrode composition. The performance of NixSn-based electrodes toward Na-ion storage was also characterized, reaching significant capacities above 200 mAh g⁻¹ at 0.1 A g⁻¹ but with a relatively fast fade over 120 continuous cycles. A relatively larger pseudocapacitive contribution was obtained in Ni Sn-based electrodes for SIBs when compared with LIBs, consistently with the lower contribution of the Na ion diffusion associated to its larger size.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optical Analysis of Oxygen Self-Diffusion in Ultrathin CeO2 Layers at Low Temperatures

  • Neuderth, Paula|||0000-0003-3468-2815
  • Hille, Pascal
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • De La Mata, Maria|||0000-0002-1581-4838
  • Coll, Mariona|||0000-0001-5157-7764
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Eickhoff, Martin
An optical in situ strategy for the analysis of oxygen diffusion in ultrathin ceria layers with a thickness of 2-10 nm at temperatures between 50 and 200 °C is presented, which allows for the determination of diffusion coefficients. This method is based on the sensitivity of the photoluminescence (PL) intensity of InGaN nanowires to adsorbed oxygen. The oxygen diffusion through an ultrathin CeO coating deposited on the InGaN nanowires is monitored by analyzing the transient PL behavior of the InGaN nanowires, which responds to changes of the oxygen concentration in the environment when the corresponding oxygen concentration is established at the CeO/InGaN interface due to diffusion through the coating. Quantitative evaluation of the oxygen diffusion in CeO based on a model considering Langmuir Adsorption and recombination yields a diffusion coefficient D of (2.55 ± 0.05) × 10 cm s at a temperature of 100 °C. Temperature-dependent measurements reveal an Arrhenius type behavior of D with an activation energy of (0.28 ± 0.04) eV. In contrast, no oxygen diffusion is detected for an ultrathin layer (≥5 nm) of AlO, which is known as a poor oxygen ion conductor within the analyzed temperature regime.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High Thermoelectric Performance in Crystallographically Textured n-Type Bi2Te3- xSex Produced from Asymmetric Colloidal Nanocrystals

  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Ortega, Silvia|||0000-0002-3812-5146
  • Li, Mengyao|||0000-0002-9082-7938
  • David, Jérémy|||0000-0003-3219-149X
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Ng, Ka Ming
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cadavid, Doris|||0000-0002-1376-6078
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the present work, we demonstrate crystallographically textured n-type BiTeSe nanomaterials with exceptional thermoelectric figures of merit produced by consolidating disk-shaped BiTeSe colloidal nanocrystals (NCs). Crystallographic texture was achieved by hot pressing the asymmetric NCs in the presence of an excess of tellurium. During the hot press, tellurium acted both as lubricant to facilitate the rotation of NCs lying close to normal to the pressure axis and as solvent to dissolve the NCs approximately aligned with the pressing direction, which afterward recrystallize with a preferential orientation. NC-based BiTeSe nanomaterials showed very high electrical conductivities associated with large charge carrier concentrations, n. We hypothesize that such large n resulted from the presence of an excess of tellurium during processing, which introduced a high density of donor Te antisites. Additionally, the presence in between grains of traces of elemental Te, a narrow band gap semiconductor with a work function well below BiTeSe, might further contribute to increase n through spillover of electrons, while at the same time blocking phonon propagation and hole transport through the nanomaterial. NC-based BiTeSe nanomaterials were characterized by very low thermal conductivities in the pressing direction, which resulted in ZT values up to 1.31 at 438 K in this direction. This corresponds to a ca. 40% ZT enhancement from commercial ingots. Additionally, high ZT values were extended over wider temperature ranges due to reduced bipolar contribution to the Seebeck coefficient and the thermal conductivity. Average ZT values up to 1.15 over a wide temperature range, 320 to 500 K, were measured, which corresponds to a ca. 50% increase over commercial materials in the same temperature range. Contrary to most previous works, highest ZT values were obtained in the pressing direction, corresponding to the c crystallographic axis, due to the predominance of the thermal conductivity reduction over the electrical conductivity difference when comparing the two crystal directions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Colloidal Ni2-, XCoxP nanocrystals for the hydrogen evolution reaction

  • Liu, Junfeng|||0000-0003-3164-6472
  • Wang, Zhenxing|||0000-0001-5083-0975
  • David, Jérémy|||0000-0003-3219-149X
  • Llorca, Jordi|||0000-0002-7447-9582
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Shavel, Alexey|||0000-0002-3995-0391
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Meyns, Michaela|||0000-0003-2476-9001
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
A cost-effective and scalable approach was developed to produce monodisperse NiCoP nanocrystals (NCs) with composition tuned over the entire range (0 ≤ x ≤ 2). NiCoP NCs were synthesized using low-cost, stable and low-toxicity triphenyl phosphite (TPP) as a phosphorus source, metal chlorides as metal precursors and hexadecylamine (HDA) as a ligand. The synthesis involved the nucleation of amorphous Ni-P and its posterior crystallization and simultaneous incorporation of Co. The composition, size and morphology of the NiCoP NCs could be controlled simply by varying the ratio of Ni and Co precursors and the amounts of TPP and HDA. Ternary NiCoP-based electrocatalysts exhibited enhanced electrocatalytic activity toward the hydrogen evolution reaction (HER) compared to binary phosphides. In particular, NiCoP electrocatalysts displayed the lowest overpotential of 97 mV at J = 10 mA cm and an excellent long-term stability. DFT calculations of the Gibbs free energy for hydrogen adsorption at the surface of NiCoP NCs showed NiCoP to have the most appropriate composition to optimize this parameter within the whole NiCoP series. However, the hydrogen adsorption energy was demonstrated not to be the only parameter controlling the HER activity in NiCoP.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tin Diselenide Molecular Precursor for Solution-Processable Thermoelectric Materials

  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Yu|||0000-0001-7313-6740
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Xing, Congcong|||0000-0001-7674-6720
  • Li, Mengyao|||0000-0002-9082-7938
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ng, Ka Ming
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Guardia, Pablo|||0000-0001-9076-4642
  • Prato, Mirko|||0000-0002-2188-8059
  • Cadavid, Doris|||0000-0002-1376-6078
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the present work, we detail a fast and simple solution-based method to synthesize hexagonal SnSe nanoplates (NPLs) and their use to produce crystallographically textured SnSe nanomaterials. We also demonstrate that the same strategy can be used to produce orthorhombic SnSe nanostructures and nanomaterials. NPLs are grown through a screw dislocation-driven mechanism. This mechanism typically results in pyramidal structures, but we demonstrate here that the growth from multiple dislocations results in flower-like structures. Crystallographically textured SnSe bulk nanomaterials obtained from the hot pressing of these SnSe structures display highly anisotropic charge and heat transport properties and thermoelectric (TE) figures of merit limited by relatively low electrical conductivities. To improve this parameter, SnSe NPLs are blended here with metal nanoparticles. The electrical conductivities of the blends are significantly improved with respect to bare SnSe NPLs, what translates into a three-fold increase of the TE Figure of merit, reaching unprecedented ZT values up to 0.65.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Controllable vapor phase fabrication of F:Mn3O4 thin films functionalized with Ag and TiO2

  • Bigiani, Lorenzo|||0000-0001-7404-2340
  • Barreca, Davide|||0000-0002-8779-3386
  • Gasparotto, Alberto|||0000-0003-4626-651X
  • Sada, Cinzia|||0000-0002-7607-0481
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Maccato, Chiara|||0000-0001-6368-5754
A facile two-step vapor phase synthetic approach is proposed for the fabrication of MnO thin films chemically modified with fluorine, and eventually functionalized with silver or titania. The adopted strategy exploits the initial chemical vapor deposition (CVD) of MnO on Si(100) substrates starting from a diamine diketonate Mn(ii) complex, followed by the controlled radio frequency (RF)-sputtering of silver or titania. Complementary analytical techniques were employed to investigate the crystallinity (X-ray diffraction), chemical composition (X-ray photoelectron spectroscopy, secondary ion mass spectrometry, energy dispersive X-ray spectroscopy), morphology and nano-organization (field emission-scanning electron microscopy, atomic force microscopy, transmission electron microscopy) of both pristine and functionalized manganese oxide thin films. Under the adopted operating conditions, the target Mn(ii) complex acted as a single-source precursor for both Mn and F, leading to the formation of phase-pure hausmannite MnO films characterized by a uniform in-depth fluorine content. In addition, the obtained results gave evidence of the formation of high purity Ag/F:MnO and TiO/F:MnO composites with a close contact between the single constituents. This work outlines an amenable and efficient method for the vapor phase growth of composite MnO-based thin films, which are favorable candidates for diverse technological applications, from photocatalysis to gas sensing.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Colloidal Ni-Co-Sn nanoparticles as efficient electrocatalysts for the methanol oxidation reaction

  • Li, Junshan|||0000-0002-1482-1972
  • Luo, Zhishan|||0000-0002-0801-9238
  • He, Feng
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Liu, Junfeng|||0000-0003-3164-6472
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Ting|||0000-0002-0317-9662
  • Infante Carrió, María F.
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The deployment of direct methanol fuel cells requires engineering cost-effective and durable electrocatalysts for the methanol oxidation reaction (MOR). As an alternative to noble metals, Ni-based alloys have shown excellent performance and good stability toward the MOR. Herein, we present a series of NiCoSn colloidal nanoparticles (NPs) with composition tuned over the entire Ni/Co range (0 ≤ x ≤ 3). We demonstrate electrodes based on these ternary NPs to provide improved catalytic performance toward the MOR in an alkaline medium when compared with binary NiSn NPs. A preliminary composition optimization resulted in NiCoSn NP-based electrodes exhibiting extraordinary mass current densities, up to 1050 mA mg, at 0.6 V vs. Hg/HgO in 1.0 M KOH containing 1.0 M methanol. This current density was about two-fold higher than that of NiSn electrodes (563 mA mg). The excellent performance obtained with the substitution of small amounts of Ni by Co was concomitant with an increase of the surface coverage of active species and an enhancement of the diffusivity of the reaction limiting species. Additionally, saturation of the catalytic activity at higher methanol concentrations was measured for NiCoSn NP-based electrodes containing a small amount of Co when compared with binary NiSn NPs. While the electrode stability was improved with respect to elemental Ni NP-based electrodes, the introduction of small amounts of Co slightly decreased the cycling performance. Additionally, Sn, a key element to improve stability with respect to elemental Ni NPs, was observed to slowly dissolve in the presence of KOH. Density functional theory calculations on metal alloy surfaces showed the incorporation of Co within the NiSn structure to provide more effective sites for CO and CHOH adsorption. However, the relatively lower stability could not be related to CO or CHOH poisoning.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Field effect enhancement in buffered quantum nanowire networks

  • Krizek, Filip
  • Sestoft, Joachim E.
  • Aseev, Pavel|||0000-0003-0343-9302
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Vaitiekenas, Saulius
  • Casparis, Lucas
  • Khan, Sabbir A.|||0000-0003-1279-7638
  • Liu, Yu|||0000-0001-7313-6740
  • Stankevič, Tomas
  • Whiticar, A. M.
  • Fursina, Alexandra
  • Boekhout, Frenk
  • Koops, René
  • Uccelli, Emanuele
  • Kouwenhoven, Leo P.
  • Marcus, Charles M.
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Krogstrup, Peter|||0000-0002-1930-8553
III-V semiconductor nanowires have shown great potential in various quantum transport experiments. However, realizing a scalable high-quality nanowire-based platform that could lead to quantum information applications has been challenging. Here, we study the potential of selective area growth by molecular beam epitaxy of InAs nanowire networks grown on GaAs-based buffer layers, where Sb is used as a surfactant. The buffered geometry allows for substantial elastic strain relaxation and a strong enhancement of field effect mobility. We show that the networks possess strong spin-orbit interaction and long phase-coherence lengths with a temperature dependence indicating ballistic transport. With these findings, and the compatibility of the growth method with hybrid epitaxy, we conclude that the material platform fulfills the requirements for a wide range of quantum experiments and applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optimizing the yield of A-polar GaAs nanowires to achieve defect-free zinc blende structure and enhanced optical functionality

  • Zamani, Mahdi|||0000-0003-0750-2938
  • Tütüncüoglu, Gözde
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Francaviglia, Luca|||0000-0002-2138-0837
  • Güniat, Lucas|||0000-0001-7883-4433
  • Ghisalberti, Lea
  • Potts, Heidi A.
  • Friedl, Martin
  • Markov, Edoardo
  • Kim, Wonjong
  • Leran, Jean-Baptiste
  • Dubrovskii, Vladimir G.|||0000-0003-2088-7158
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
Compound semiconductors exhibit an intrinsic polarity, as a consequence of the ionicity of their bonds. Nanowires grow mostly along the (111) direction for energetic reasons. Arsenide and phosphide nanowires grow along (111)B, implying a group V termination of the (111) bilayers. Polarity engineering provides an additional pathway to modulate the structural and optical properties of semiconductor nanowires. In this work, we demonstrate for the first time the growth of Ga-assisted GaAs nanowires with (111)A-polarity, with a yield of up to ∼50%. This goal is achieved by employing highly Ga-rich conditions which enable proper engineering of the energies of A and B-polar surfaces. We also show that A-polarity growth suppresses the stacking disorder along the growth axis. This results in improved optical properties, including the formation of AlGaAs quantum dots with two orders or magnitude higher brightness. Overall, this work provides new grounds for the engineering of nanowire growth directions, crystal quality and optical functionality.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

III-V Integration on Si(100), Vertical Nanospades

  • Güniat, Lucas|||0000-0001-7883-4433
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Garcia, Oscar|||0000-0001-8541-7013
  • Boscardin, Mégane
  • Vindice, David
  • Tappy, Nicolas
  • Friedl, Martin
  • Kim, Wonjong
  • Zamani, Mahdi|||0000-0003-0750-2938
  • Francaviglia, Luca|||0000-0002-2138-0837
  • Balgarkashi, Akshay
  • Leran, Jean-Baptiste
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
III-V integration on Si(100) is a challenge: controlled vertical vapor liquid solid nanowire growth on this platform has not been reported so far. Here we demonstrate an atypical GaAs vertical nanostructure on Si(100), coined nanospade, obtained by a nonconventional droplet catalyst pinning. The Ga droplet is positioned at the tip of an ultrathin Si pillar with a radial oxide envelope. The pinning at the Si/oxide interface allows the engineering of the contact angle beyond the Young-Dupré equation and the growth of vertical nanospades. Nanospades exhibit a virtually defect-free bicrystalline nature. Our growth model explains how a pentagonal twinning event at the initial stages of growth provokes the formation of the nanospade. The optical properties of the nanospades are consistent with the high crystal purity, making these structures viable for use in integration of optoelectronics on the Si(100) platform.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Co-Sn Nanocrystalline Solid Solutions as Anode Materials in Lithium-Ion Batteries with High Pseudocapacitive Contribution

  • Li, Junshan|||0000-0002-1482-1972
  • Xu, Xijun
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Infante Carrió, María F.
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Co-Sn solid-solution nanoparticles with Sn crystal structure and tuned metal ratios were synthesized by a facile one pot solution-based procedure involving the initial reduction of a Sn precursor followed by incorporation of Co within the Sn lattice. These nanoparticles were used as anode materials for Li-ion batteries. Among the different compositions tested, Co Sn and Co Sn electrodes provided the highest capacities with values above 1500 mAh g at a current density of 0.2 A g after 220 cycles, and up to 800 mAh g at 1.0 A g after 400 cycles. Up to 81 % pseudocapacitance contribution was measured for these electrodes at a sweep rate of 1.0 mV s , thereby indicating fast kinetics and long durability. The excellent performance of Co-Sn nanoparticle alloy-based electrodes was attributed to both the small size of the crystal domains and their suitable composition, which buffered volume changes of Sn and contributed to a suitable electrode restructuration.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hierarchical Porous Ni3S4 with Enriched High-Valence Ni Sites as a Robust Electrocatalyst for Efficient Oxygen Evolution Reaction

  • Wan, Kai|||0000-0003-4689-310X
  • Luo, Jiangshui
  • Zhou, Chen
  • Zhang, Ting
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Lu, Xihong
  • Mao, Bing-Wei
  • Zhang, Xuan|||0000-0002-3667-4280
  • Fransaer, Jan|||0000-0002-0232-0687
Electrochemical water splitting is a common way to produce hydrogen gas, but the sluggish kinetics of the oxygen evolution reaction (OER) significantly limits the overall energy conversion efficiency of water splitting. In this work, a highly active and stable, meso-macro hierarchical porous Ni S architecture, enriched in Ni is designed as an advanced electrocatalyst for OER. The obtained Ni S architectures exhibit a relatively low overpotential of 257 mV at 10 mA cm and 300 mV at 50 mA cm . Additionally, this Ni S catalyst has excellent long-term stability (no degradation after 300 h at 50 mA cm ). The outstanding OER performance is due to the high concentration of Ni and the meso-macro hierarchical porous structure. The presence of Ni enhances the chemisorption of OH , which facilitates electron transfer to the surface during OER. The hierarchical porosity increases the number of exposed active sites, and facilitates mass transport. A water-splitting electrolyzer using the prepared Ni S as the anode catalyst and Pt/C as the cathode catalyst achieves a low cell voltage of 1.51 V at 10 mA cm . Therefore, this work provides a new strategy for the rational design of highly active OER electrocatalysts with high valence Ni and hierarchical porous architectures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ligand-mediated band engineering in bottom-up assembled SnTe nanocomposites for thermoelectric energy conversion

  • Ibáñez, Maria|||0000-0001-5013-2843
  • Hasler, Roger
  • Genç, Aziz|||0000-0002-2888-2549
  • Liu, Yu|||0000-0001-7313-6740
  • Kuster, Beatrice
  • Schuster, Maximilian
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Cadavid, Doris|||0000-0002-1376-6078
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
The bottom-up assembly of colloidal nanocrystals is a versatile methodology to produce composite nanomaterials with precisely tuned electronic properties. Beyond the synthetic control over crystal domain size, shape, crystal phase, and composition, solution-processed nanocrystals allow exquisite surface engineering. This provides additional means to modulate the nanomaterial characteristics and particularly its electronic transport properties. For instance, inorganic surface ligands can be used to tune the type and concentration of majority carriers or to modify the electronic band structure. Herein, we report the thermoelectric properties of SnTe nanocomposites obtained from the consolidation of surface-engineered SnTe nanocrystals into macroscopic pellets. A CdSe-based ligand is selected to (i) converge the light and heavy bands through partial Cd alloying and (ii) generate CdSe nanoinclusions as a secondary phase within the SnTe matrix, thereby reducing the thermal conductivity. These SnTe-CdSe nanocomposites possess thermoelectric figures of merit of up to 1.3 at 850 K, which is, to the best of our knowledge, the highest thermoelectric figure of merit reported for solution-processed SnTe.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Solution-Processed Ultrathin SnS2-Pt Nanoplates for Photoelectrochemical Water Oxidation

  • Zuo, Yong|||0000-0003-1564-467X
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Li, Junshan|||0000-0002-1482-1972
  • Du, Ruifeng
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Ting|||0000-0002-0317-9662
  • Yao, Liang
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Sivula, Kevin|||0000-0002-8458-0270
  • Guijarro, Néstor|||0000-0002-3277-8816
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Tin disulfide (SnS ) is attracting significant interest because of the abundance of its elements and its excellent optoelectronic properties in part related to its layered structure. In this work, we specify the preparation of ultrathin SnS nanoplates (NPLs) through a hot-injection solution-based process. Subsequently, Pt was grown on their surface via in situ reduction of a Pt salt. The photoelectrochemical (PEC) performance of such nanoheterostructures as photoanode toward water oxidation was tested afterwards. Optimized SnS -Pt photoanodes provided significantly higher photocurrent densities than bare SnS and SnS -based photoanodes of previously reported study. Mott-Schottky analysis and PEC impedance spectroscopy (PEIS) were used to analyze in more detail the effect of Pt on the PEC performance. From these analyses, we attribute the enhanced activity of SnS -Pt photoanodes reported here to a combination of the very thin SnS NPLs and the proper electronic contact between Pt nanoparticles (NPs) and SnS .
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Upscaling high activity oxygen evolution catalysts based on CoFe2O4 nanoparticles supported on nickel foam for power-to-gas electrochemical conversion with energy efficiencies above 80%

  • Urbain, Félix|||0000-0001-5423-6818
  • Du, Ruifeng
  • Tang, PengYi|||0000-0002-2306-095X
  • Smirnov, Vladimir
  • Andreu, Teresa|||0000-0002-2804-4545
  • Finger, Friedhelm
  • Jiménez Divins, Nuria
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Morante, Joan Ramon|||0000-0002-4981-4633
We investigate cobalt ferrite nanoparticles (NPs) supported on large-scale electrodes as oxygen evolution reaction (OER) catalysts. Colloidal CoFeO NPs were loaded on low-cost and high surface area nickel foam (NF) scaffolds. The coating process was optimized for large electrode areas, ensuring a proper distribution of the NPs on the NF that allowed overcoming the electrical conductivity limitations of oxide NPs. We were able to produce CoFeO-coated NFs having 10 cm geometric surface areas with overpotentials below 300 mV for the OER at a current density of 50 mA/cm. Such impressively low overpotentials suggested using CoFeO NP-based electrodes within a water electrolysis device. In this prototype device, stable operating currents up to 500 mA at remarkably low cell-voltages of 1.62 and 1.53 V, at ambient and 50 °C electrolyte temperatures, respectively, were reached during operation periods of up to 50 h. The high electrochemical energy efficiencies reached at 50 mA/cm, 75% and 81% respectively, rendered these devices particularly appealing to be combined with low-cost photovoltaic systems for bias-free hydrogen production. Therefore, CoFeO NP-based electrolysers were coupled to low-cost thin-film silicon solar cells with 13% efficiency to complete a system that afforded solar-to-fuel efficiencies above 10%.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Understanding semiconductor nanostructures via advanced electron microscopy and spectroscopy

  • Zamani, Reza|||0000-0001-6940-0000
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Transmission electron microscopy (TEM) offers an ample range of complementary techniques which are able to provide essential information about the physical, chemical and structural properties of materials at the atomic scale, and hence makes a vast impact on our understanding of materials science, especially in the field of semiconductor one-dimensional (1D) nanostructures. Recent advancements in TEM instrumentation, in particular aberration correction and monochromation, have enabled pioneering experiments in complex nanostructure material systems. This review aims to address these understandings through the applications of the methodology for semiconductor nanostructures. It points out various electron microscopy techniques, in particular scanning TEM (STEM) imaging and spectroscopy techniques, with their already-employed or potential applications on 1D nanostructured semiconductors. We keep the main focus of the paper on the electronic and optoelectronic properties of such semiconductors, and avoid expanding it further. In the first part of the review, we give a brief introduction to each of the STEM-based techniques, without detailed elaboration, and mention the recent technological and conceptual developments which lead to novel characterization methodologies. For further reading, we refer the audience to a handful of papers in the literature. In the second part, we highlight the recent examples of application of the STEM methodology on the 1D nanostructure semiconductor materials, especially III-V, II-V, and group IV bare and heterostructure systems. The aim is to address the research questions on various physical properties and introduce solutions by choosing the appropriate technique that can answer the questions. Potential applications will also be discussed, the ones that have already been used for bulk and 2D materials, and have shown great potential and promise for 1D nanostructure semiconductors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Porous NiTiO3/TiO2 nanostructures for photocatatalytic hydrogen evolution

  • Xing, Congcong|||0000-0001-7674-6720
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Junfeng|||0000-0003-3164-6472
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Soler, Lluís|||0000-0003-1591-3366
  • Sivula, Kevin|||0000-0002-8458-0270
  • Guijarro, Néstor|||0000-0002-3277-8816
  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Du, Ruifeng
  • Zuo, Yong|||0000-0003-1564-467X
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Llorca, Jordi|||0000-0002-7447-9582
We present a strategy to produce porous NiTiO/TiO nanostructures with excellent photocatalytic activity toward hydrogen generation. In a first step, nickel-doped TiO needle bundles were synthesized by a hydrothermal procedure. Through the sintering in air of these nanostructures, porous NiTiO/TiO heterostructured rods were obtained. Alternatively, the annealing in argon of the nickel-doped TiO needle bundles resulted in NiO/TiO elongated nanostructures. Porous NiTiO/TiO structures were tested for hydrogen evolution in the presence of ethanol. Such porous heterostructures exhibited superior photocatalytic activity toward hydrogen generation, with hydrogen production rates up to 11.5 mmol h g at room temperature. This excellent performance is related here to the optoelectronic properties and geometric parameters of the material.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Combined High Catalytic Activity and Efficient Polar Tubular Nanostructure in Urchin-Like Metallic NiCo2Se4 for High-Performance Lithium-Sulfur Batteries

  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Zhang, Ting|||0000-0002-0317-9662
  • Du, Ruifeng
  • Li, Junshan|||0000-0002-1482-1972
  • Yang, Xuhui
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Urchin-shaped NiCoSe (u-NCSe) nanostructures as efficient sulfur hosts are synthesized to overcome the limitations of lithium-sulfur batteries (LSBs). u-NCSe provides a beneficial hollow structure to relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics. Owing to these excellent qualities as cathode for LSBs, S@u-NCSe delivers outstanding initial capacities up to 1403 mAh g at 0.1 C and retains 626 mAh g at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg cm), a reversible capacity of 557 mAh g is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measurements prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long-life and high-rate electrochemical performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multilayered Hematite Nanowires with Thin-Film Silicon Photovoltaics in an All-Earth-Abundant Hybrid Tandem Device for Solar Water Splitting, Insights into the Combination of Multilayered Hematite Nanowires with Thin-Film Silicon Photovoltaics in an All-Earth-Abundant Hybrid Tandem Device for Solar Water Splitting

  • Urbain, Félix|||0000-0001-5423-6818
  • Tang, PengYi|||0000-0002-2306-095X
  • Smirnov, Vladimir
  • Welter, Katharina
  • Andreu, Teresa|||0000-0002-2804-4545
  • Finger, Friedhelm
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
The concept of hybrid tandem device structures that combine metal oxides with thin-film semiconducting photoabsorbers holds great promise for large-scale, robust, and cost-effective bias-free photoelectrochemical water splitting (PEC-WS). This work highlights important steps toward the efficient coupling of high-performance hematite photoanodes with multijunction thin-film silicon photocathodes providing high bias-free photocurrent density. The hybrid PEC-WS device is optimized by testing three types of multijunction silicon photocathodes with the hematite photoanode: amorphous silicon (a-Si:H) tandem: a-Si:H/a-Si:H and triple junction with microcrystalline silicon (μc-Si:H): a-Si:H/a-Si:H/μc-Si:H and a-Si:H/μc-Si:H/μc-Si:H. The results provide evidence that the multijunction structures offer high flexibility for hybrid tandem devices with regard to tunable photovoltages and spectral matching. Furthermore, both photoanode and photocathode are tested under various electrolyte and light concentration conditions, respectively, with respect to their photoelectrochemical performance and stability. A 27 % enhancement in the solar-to-hydrogen conversion efficiency is observed upon concentrating light from 100 to 300 mW cm . Ultimately, bias-free water splitting is demonstrated, with a photocurrent density of 4.6 mA cm (under concentrated illumination) paired with excellent operation stability for more than 24 h of the all-earth-abundant and low-cost hematite/silicon tandem PEC-WS device.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tuning transport properties in thermoelectric nanocomposites through inorganic ligands and heterostructured building blocks

  • Ibáñez, Maria|||0000-0001-5013-2843
  • Genç, Aziz|||0000-0002-2888-2549
  • Hasler, Roger
  • Liu, Yu|||0000-0001-7313-6740
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Nazarenko, Olga
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
Methodologies that involve the use of nanoparticles as "artificial atoms" to rationally build materials in a bottom-up fashion are particularly well-suited to control the matter at the nanoscale. Colloidal synthetic routes allow for an exquisite control over such "artificial atoms" in terms of size, shape, and crystal phase as well as core and surface compositions. We present here a bottom-up approach to produce Pb-Ag-K-S-Te nanocomposites, which is a highly promising system for thermoelectric energy conversion. First, we developed a high-yield and scalable colloidal synthesis route to uniform lead sulfide (PbS) nanorods, whose tips are made of silver sulfide (AgS). We then took advantage of the large surface-to-volume ratio to introduce a p-type dopant (K) by replacing native organic ligands with KTe. Upon thermal consolidation, KTe-surface modified PbS-AgS nanorods yield p-type doped nanocomposites with PbTe and PbS as major phases and AgS and AgTe as embedded nanoinclusions. Thermoelectric characterization of such consolidated nanosolids showed a high thermoelectric figure-of-merit of 1 at 620 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Robust one-pot synthesis of citrate-stabilized Au@CeO2 hybrid nanocrystals with different thickness and dimensionality

  • Bastús, Neus G.|||0000-0002-3144-7986
  • Piella, Jordi|||0000-0002-5788-3145
  • Pérez Brizuela, Sara
  • Patarroyo, Javier|||0000-0002-3703-666X
  • Genç, Aziz|||0000-0002-2888-2549
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Puntes, Víctor|||0000-0001-8996-9499
Well-defined colloidal Au@CeO hybrid nanocrystals (NCs) comprising different core/shell morphologies have been synthesized via a novel and simple one-pot aqueous approach. The method allows producing hybrid morphologies composed by an active and accessible Au core coated by a porous CeO shell with varying shell thickness and dimensionality by simply adjusting the Au /Ce precursor ratio. These hybrid NCs are highly monodisperse and well-dispersed in water, showing intense surface plasmon resonance bands that offer unique opportunities for advanced material applications, such as plasmonics and catalysis.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Role of Boron and Phosphorus in Enhanced Electrocatalytic Oxygen Evolution by Nickel Borides and Nickel Phosphides

  • Masa, Justus|||0000-0002-8555-5157
  • Andronescu, Corina
  • Antoni, Hendrik
  • Sinev, Ilya
  • Seisel, Sabine
  • Elumeeva, Karina
  • Barwe, Stephan
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Roldan Cuenya, Beatriz
  • Muhler, Martin
  • Schuhmann, Wolfgang|||0000-0003-2916-5223
The modification of nickel with boron or phosphorus leads to significant enhancement of its electrocatalytic activity for the oxygen evolution reaction (OER). However, the precise role of the guest elements, B and P, in enhancing the OER of the host element (Ni) remains unclear. Herein, we present insight into the role of B and P in enhancing electrocatalysis of oxygen evolution by nickel borides and nickel phosphides. The apparent activation energy, E*, of electrocatalytic oxygen evolution on NiP was 78.4 kJ/mol, on NiB 65.4 kJ/mol, and on Ni nanoparticles 94.0 kJ/mol, thus revealing that both B and P affect the intrinsic activity of nickel. XPS data revealed shifts of -0.30 and 0.40 eV in the binding energy of the Ni 2p peak of NiB and NiP, respectively, with respect to that of pure Ni at 852.60 eV, thus indicating that B and P induce opposite electronic effects on the surface electronic structure of Ni. The origin of enhanced activity for oxygen evolution cannot, therefore, be attributed to such electronic modification or ligand effect. Severe changes induced on the nickel lattice, specifically, the Ni-Ni atomic order and interatomic distances (strain effect), by the presence of the guest atoms seem to be the dominant factors responsible for enhanced activity of oxygen evolution in nickel borides and nickel phosphides.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Chromium phosphide CrP as highly active and stable electrocatalysts for oxygen electroreduction in alkaline media

  • Liu, Junfeng|||0000-0003-3164-6472
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Zhang, Ting|||0000-0002-0317-9662
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Wang, Ying
  • Meyns, Michaela|||0000-0003-2476-9001
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Catalysts for oxygen reduction reaction (ORR) are key components in emerging energy technologies such as fuel cells and metal-air batteries. Developing low-cost, high performance and stable electrocatalysts is critical for the extensive implementation of these technologies. Herein, we present a procedure to prepare colloidal chromium phosphide CrP nanocrystals and we test their performance as ORR electrocatalyst. CrP-based catalysts exhibited remarkable activities with a limiting current density of 4.94 mA cm at 0.2 V, a half-potential of 0.65 V and an onset potential of 0.8 V at 1600 rpm, which are comparable to commercial Pt/C. Advantageously, CrP-based catalysts displayed much higher stabilities and higher tolerances to methanol in alkaline solution. Using density functional theory calculations, we demonstrate CrP to provide a very strong chemisorption of O that facilitates its reduction and explains the excellent ORR performance experimentally demonstrated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

From rational design of a new bimetallic MOF family with tunable linkers to OER catalysts

  • Zhang, Xuan
  • Luo, Jiangshui
  • Wan, Kai|||0000-0003-4689-310X
  • Plessers, Dieter
  • Sels, Bert
  • Song, Jianxun
  • Chen, Liugang
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fransaer, Jan|||0000-0002-0232-0687
Innovative bimetallic MOFs offer more possibilities to further tailor the properties of MOFs, which have attracted great attention for wide applications. However, it is still a great challenge to rationally design bimetallic MOFs due to the lack of a tunable and reasonable hybrid structure architecture. Herein, a new series of bimetallic metal-organic frameworks (MOFs) with tunable pillar linkers were prepared by a one-step synthesis method. These bimetallic MOFs retain the same crystal structure when the mole fraction (based on metal) of the two metals changes from 0 to 1 and both metal ions occupy random nodal positions. The incorporation of a second metal cation has a large influence on the intrinsic properties (e.g. thermal stabilities and band gaps) of the MOFs. Furthermore, these bimetallic MOFs were used as self-sacrificial templates to prepare bimetal oxide catalysts for the oxygen evolution reaction (OER). After pyrolysis, a porous and hierarchical honeycomb-like structure with carbon network covered (bi)metal oxides is formed. Among all the bimetallic MOF-derived catalysts, CoNi1@C showed the best performance for the OER with the lowest Tafel slopes (55.6 mV dec ) and overpotentials (335 mV on a glassy carbon electrode and 276 mV on Ni foam) at a current density of 10 mA cm , which is higher than those of state-of-the-art Co-Ni mixed oxide catalysts derived from MOFs for the OER. Our results indicate that the incorporation of a second metal ion is a promising strategy to tailor the properties of MOFs. More importantly, this new bimetallic MOF family with tunable linkers is expected to serve as a flexible assembly platform to offer broad possibilities for practical applications of MOFs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Graphene-supported palladium phosphide PdP2 nanocrystals for ethanol electrooxidation

  • Liu, Junfeng|||0000-0003-3164-6472
  • Luo, Zhishan|||0000-0002-0801-9238
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Llorca, Jordi|||0000-0002-7447-9582
  • Nasiou, Déspina
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Meyns, Michaela|||0000-0003-2476-9001
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We present a procedure to produce single-phase PdP nanocrystals (NCs). The approach involves the reaction of palladium(II) acetylacetonate and hexamethylphosphoroustriamide to nucleate defective Pd P nanoparticles that subsequently, with further phosphorous incorporation, crystallize into PdP . The synthesized PdP NCs were supported on reduced graphene oxide (rGO) and applied as electrocatalysts for ethanol oxidation. The activity of PdP toward the ethanol oxidation reaction (EOR) was over a threefold higher than that of Pd NCs prepared under similar conditions. Even better performance was obtained from PdP NCs supported on rGO, which showed current densities up to 51.4 mA cm and mass activities of 1.60 A mg , that is 4.8 and 15 times higher than Pd NCs. Besides, PdP NCs and PdP /rGO catalysts showed improved stability during EOR than Pd NCs and Pd/rGO.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

MoSx@NiO Composite Nanostructures, An Advanced Nonprecious Catalyst for Hydrogen Evolution Reaction in Alkaline Media

  • Ibupoto, Zafar Hussain
  • Tahira, Aneela
  • Tang, PengYi|||0000-0002-2306-095X
  • Liu, Xianjie
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Fahlman, Mats
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Vagin, Mikhail
  • Vomiero, Alberto|||0000-0003-2935-1165
The design of the earth-abundant, nonprecious, efficient, and stable electrocatalysts for efficient hydrogen evolution reaction (HER) in alkaline media is a hot research topic in the field of renewable energies. A heterostructured system composed of MoS deposited on NiO nanostructures (MoS @NiO) as a robust catalyst for water splitting is proposed here. NiO nanosponges are applied as cocatalyst for MoS in alkaline media. Both NiO and MoS @NiO composites are prepared by a hydrothermal method. The NiO nanostructures exhibit sponge-like morphology and are completely covered by the sheet-like MoS . The NiO and MoS exhibit cubic and hexagonal phases, respectively. In the MoS @NiO composite, the HER experiment in 1 m KOH electrolyte results in a low overpotential (406 mV) to produce 10 mA cm current density. The Tafel slope for that case is 43 mV per decade, which is the lowest ever achieved for MoS -based electrocatalyst in alkaline media. The catalyst is highly stable for at least 13 h, with no decrease in the current density. This simple, cost-effective, and environmentally friendly methodology can pave the way for exploitation of MoS @NiO composite catalysts not only for water splitting, but also for other applications such as lithium ion batteries, and fuel cells.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tailor-made metal-nitrogen-carbon bifunctional electrocatalysts for rechargeable Zn-air batteries via controllable MOF units

  • Zhang, Xuan|||0000-0002-3667-4280
  • Luo, Jiangshui
  • Lin, Heng-Fu
  • Tang, PengYi|||0000-0002-2306-095X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Wan, Kai|||0000-0003-4689-310X
  • Mao, Bing-Wei
  • Liu, Li-Min
  • Fransaer, Jan|||0000-0002-0232-0687
The majority of chemical syntheses involve the use of catalysts, which play a crucial role in the yield and conversion rates of chemical reactions. In view of the increasing demand for chemical commodities and specialties linked to the growth of the world's population and the living standards, highly efficient and low-cost catalysts are urgently required. The metal-nitrogen-carbon (M-N-C) catalysts family is one of the most promising candidates. In this work, a series of benzene-1,3,5-tricarboxylate linker based metal organic frameworks (MOFs) were used as self-sacrificial templates and tunable platform for designable preparation of M-N-C catalysts. Changing the pillars between the 2D layers and the nature of the metal ions in the pristine MOFs significantly influenced the structure, chemical composition and catalytic activity of the resulting M-N-C catalysts for the oxygen reduction reaction (ORR). Furthermore, the influence of the MOF units on the catalyst performance, the role of the metals in the M-N-C catalysts and the primary catalytically active sites for ORR were explored by a combination of density functional theory (DFT), in-depth structural and chemical/elemental characterizations, and electrochemical studies. Among the prepared catalysts, Co-BTC-bipy-700 exhibited the highest electrocatalytic activity for oxygen reduction reaction (ORR), which showed a larger limiting current density and similar half-wave potentials with less catalyst degradation and much higher methanol tolerance than the commercial Pt/C catalyst. Meanwhile, as a bifunctional electrocatalyst, Co-BTC-bipy-700 catalyst was also employed for oxygen evolution reaction (OER) and demonstrated a lower overpotential (lowered by 140 mV at a current density of 10 mA cm) and better durability than IrO. Furthermore, in terms of device performance, the Zn-air battery enabled by Co-BTC-bipy-700 catalyst reached a maximum specific energy as high as 1009.8 Wh kg, which is 76.5% of the theoretical value (1320 Wh kg), and demonstrated higher discharge potential and lower charge potential than that based on the Pt/C catalyst. Importantly, the presented strategy for tailor-made M-N-C catalysts by controlling the synthesis of the pristine MOFs could offer a guide map for the future design of M-N-C catalysts family not only for electrochemical reactions but also beyond electrochemistry.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Segregation scheme of indium in AlGaInAs nanowire shells

  • Francaviglia, Luca|||0000-0002-2138-0837
  • Tütüncüoglu, Gözde
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Di Russo, Enrico
  • Escobar Steinvall, Simon|||0000-0003-4993-2979
  • Segura Ruiz, Jaime
  • Potts, Heidi A.
  • Friedl, Martin
  • Rigutti, Lorenzo
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
Quaternary alloys enable the independent optimization of different semiconductor properties, such as the separate tuning of the band gap and the lattice constant. Nanowire core-shell structures should allow a larger range of compositional tuning as strain can be accommodated in a more effective manner than in thin films. Still, the faceted structure of the nanowire may lead to local segregation effects. Here, we explore the incorporation of indium in AlGaAs shells up to 25%. In particular, we show the effect of In incorporation on the energy shift of the AlGaInAs single-photon emitters present in the shell. We observe a redshift up to 300 meV as a function of the group-III site fraction of In. We correlate the shift with segregation at the nanoscale. We find evidence of the segregation of the group-III elements at different positions in the nanowire, not observed before. We propose a model that takes into account the strain distribution in the nanowire shell and the adatom diffusion on the nanowire facets to explain the observations. This work provides novel insights on the segregation phenomena necessary to engineer the composition of multidinary alloys.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Seeded-Growth Aqueous Synthesis of Colloidal-Stable Citrate-Stabilized Au/CeO2 Hybrid Nanocrystals, Heterodimers, Core@Shell, and Clover- And Star-Like Structures

  • Piella, Jordi|||0000-0002-5788-3145
  • González Febles, Ana
  • Patarroyo, Javier|||0000-0002-3703-666X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
Well-defined colloidal-stable citrate-stabilized Au/CeO hybrid nanocrystals (NCs) with coherent quasi-epitaxial interfaces and unprecedented control of their architectural and morphological characteristics have been synthesized via a novel and straightforward seeded-growth aqueous approach. The synthetic strategy, based on the identification of the experimental conditions under which the heterogeneous nucleation and growth processes of CeO onto presynthesized Au are controlled, allows for the fine adjustment of each individual domain in the structure, particularly the size of the Au core (from 5 to 100 nm), the thickness of the CeO shell (from 5 to 20 nm), and the growth mode of CeO onto Au NCs (from core@shell to heterodimer, clover- and star-like structures). This morphological control is achieved by the rational use of sodium citrate, which plays multiple key roles, as a reducer and stabilizing agent in the preparation of Au NCs, and as a complexing agent of Ce for its controlled oxidation and hydrolysis during the subsequent CeO deposition. The resultant Au/CeO NCs remain stable and well-dispersed in water, allowing us to study the impact of fine variations of the NC structure on the underlying optical response. This level of morphological control, as well as the ease by which such well-defined nanostructures are produced, opens new opportunities for systematically investigating the interactions between individual components in designing more advanced complex NCs. Remarkably, because no organic solvents are used and no toxic waste is formed during the reaction, the proposed synthesis method can be defined as sustainable, viable, and cost-effective.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

In Situ Electrochemical Oxidation of Cu2S into CuO Nanowires as a Durable and Efficient Electrocatalyst for Oxygen Evolution Reaction

  • Zuo, Yong|||0000-0003-1564-467X
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Li, Junshan|||0000-0002-1482-1972
  • Du, Ruifeng
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Jiménez Divins, Nuria
  • Llorca, Jordi|||0000-0002-7447-9582
  • Guijarro, Néstor|||0000-0002-3277-8816
  • Sivula, Kevin|||0000-0002-8458-0270
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Development of cost-effective oxygen evolution catalysts is of capital importance for the deployment of large-scale energy-storage systems based on metal-air batteries and reversible fuel cells. In this direction, a wide range of materials have been explored, especially under more favorable alkaline conditions, and several metal chalcogenides have particularly demonstrated excellent performances. However, chalcogenides are thermodynamically less stable than the corresponding oxides and hydroxides under oxidizing potentials in alkaline media. Although this instability in some cases has prevented the application of chalcogenides as oxygen evolution catalysts and it has been disregarded in some others, we propose to use it in our favor to produce high-performance oxygen evolution catalysts. We characterize here the in situ chemical, structural, and morphological transformation during the oxygen evolution reaction (OER) in alkaline media of CuS into CuO nanowires, mediating the intermediate formation of Cu(OH). We also test their OER activity and stability under OER operation in alkaline media and compare them with the OER performance of Cu(OH) and CuO nanostructures directly grown on the surface of a copper mesh. We demonstrate here that CuO produced from in situ electrochemical oxidation of CuS displays an extraordinary electrocatalytic performance toward OER, well above that of CuO and Cu(OH) synthesized without this transformation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Superior methanol electrooxidation performance of (110)-faceted nickel polyhedral nanocrystals

  • Li, Junshan|||0000-0002-1482-1972
  • Zuo, Yong|||0000-0003-1564-467X
  • Liu, Junfeng|||0000-0003-3164-6472
  • Wang, Xiang
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Ting|||0000-0002-0317-9662
  • Infante Carrió, María F.
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Luo, Zhishan|||0000-0002-0801-9238
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We present the synthesis of (110)-faceted nickel polyhedral nanocrystals (NCs) and their characterization as electrocatalysts for the methanol oxidation reaction (MOR). Ni NCs were produced at 180 °C through the reduction in solution of a Ni salt. They were combined with carbon black and Nafion and deposited over glassy carbon to study their electrocatalytic properties. Electrodes based on (110)-faceted Ni NCs displayed a first order reaction with KOH in the concentration range from 0.1 M to 1.0 M. These electrodes were characterized by higher coverages of active species, but lower diffusion coefficients of the species limiting the reaction rate when compared with electrodes prepared from spherical Ni NCs. Overall, electrodes based on faceted Ni NCs displayed excellent performance with very high current densities, up to 61 mA cm, and unprecedented mass activities, up to 2 A mg, at 0.6 V vs. Hg/HgO in 1.0 M KOH containing 1.0 M methanol. These electrodes also displayed a notable stability. While they suffered an activity loss of ca. 30% during the first 10000 s of operation, afterward activity stabilized at very high current densities, ∼35 mA cm, and mass activities, ∼1.2 A mg, with only a 0.5% decrease during operation from 20000 to 30000 s.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Boosting Photoelectrochemical Water Oxidation of Hematite in Acidic Electrolytes by Surface State Modification

  • Tang, PengYi|||0000-0002-2306-095X
  • Han, Li-Juan
  • Hegner, Franziska Simone
  • Paciok, Paul
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Du, Hong-Chu
  • Wei, Xiankui|||0000-0003-4320-1120
  • Jin, Lei
  • Xie, Haibing|||0000-0002-5070-2882
  • Shi, Qin
  • Andreu, Teresa|||0000-0002-2804-4545
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • López, Núria|||0000-0001-9150-5941
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
State-of-the-art water-oxidation catalysts (WOCs) in acidic electrolytes usually contain expensive noble metals such as ruthenium and iridium. However, they too expensive to be implemented broadly in semiconductor photoanodes for photoelectrochemical (PEC) water splitting devices. Here, an Earth-abundant CoFe Prussian blue analogue (CoFe-PBA) is incorporated with core-shell FeO/FeTiO type II heterojunction nanowires as composite photoanodes for PEC water splitting. Those deliver a high photocurrent of 1.25 mA cm at 1.23 V versus reversible reference electrode in acidic electrolytes (pH = 1). The enhancement arises from the synergic behavior between the successive decoration of the hematite surface with nanolayers of FeTiO and then, CoFe-PBA. The underlying physical mechanism of performance enhancement through formation of the FeO/FeTiO/CoFe-PBA heterostructure reveals that the surface states' electronic levels of hematite are modified such that an interfacial charge transfer becomes kinetically favorable. These findings open new pathways for the future design of cheap and efficient hematite-based photoanodes in acidic electrolytes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ballistic InSb Nanowires and Networks via Metal-Sown Selective Area Growth

  • Aseev, Pavel|||0000-0003-0343-9302
  • Wang, Guanzhong
  • Binci, Luca
  • Singh, Amrita
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Botifoll, Marc|||0000-0002-4876-6393
  • Stek, Lieuwe J.
  • Bordin, Alberto
  • Watson, John D.
  • Boekhout, Frenk
  • Abel, Daniel
  • Gamble, John
  • Van Hoogdalem, Kevin
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kouwenhoven, Leo P.
  • De Lange, Gijs
  • Caroff, Philippe
Selective area growth is a promising technique to realize semiconductor-superconductor hybrid nanowire networks, potentially hosting topologically protected Majorana-based qubits. In some cases, however, such as the molecular beam epitaxy of InSb on InP or GaAs substrates, nucleation and selective growth conditions do not necessarily overlap. To overcome this challenge, we propose a metal-sown selective area growth (MS SAG) technique, which allows decoupling selective deposition and nucleation growth conditions by temporarily isolating these stages. It consists of three steps: (i) selective deposition of In droplets only inside the mask openings at relatively high temperatures favoring selectivity, (ii) nucleation of InSb under Sb flux from In droplets, which act as a reservoir of group III adatoms, done at relatively low temperatures, favoring nucleation of InSb, and (iii) homoepitaxy of InSb on top of the formed nucleation layer under a simultaneous supply of In and Sb fluxes at conditions favoring selectivity and high crystal quality. We demonstrate that complex InSb nanowire networks of high crystal and electrical quality can be achieved this way. We extract mobility values of 10※000-25※000 cm V s consistently from field-effect and Hall mobility measurements across single nanowire segments as well as wires with junctions. Moreover, we demonstrate ballistic transport in a 440 nm long channel in a single nanowire under a magnetic field below 1 T. We also extract a phase-coherent length of ∼8 μm at 50 mK in mesoscopic rings.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Insight into the Degradation Mechanisms of Atomic Layer Deposited TiO2 as Photoanode Protective Layer

  • Ros, Carles|||0000-0002-9148-2767
  • Carretero González, Nina Magali
  • David, Jérémy|||0000-0003-3219-149X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Andreu, Teresa|||0000-0002-2804-4545
  • Morante, Joan Ramon|||0000-0002-4981-4633
Around 100 nm thick TiO layers deposited by atomic layer deposition (ALD) have been investigated as anticorrosion protective films for silicon-based photoanodes decorated with 5 nm NiFe catalyst in highly alkaline electrolyte. Completely amorphous layers presented high resistivity; meanwhile, the ones synthesized at 300 °C, having a fully anatase crystalline TiO structure, introduced insignificant resistance, showing direct correlation between crystallization degree and electrical conductivity. The conductivity through crystalline TiO layers has been found not to be homogeneous, presenting preferential conduction paths attributed to grain boundaries and defects within the crystalline structure. A correlation between the conductivity atomic force microscopy measurements and grain interstitials can be seen, supported by high-resolution transmission electron microscopy cross-sectional images presenting defective regions in crystalline TiO grains. It was found that the conduction mechanism goes through the injection of electrons coming from water oxidation from the electrocatalyst into the TiO conduction band. Then, electrons are transported to the Si/SiO/TiO interface where electrons recombine with holes given by the pn-Si junction. No evidences of intra-band-gap states in TiO responsible of conductivity have been detected. Stability measurements of fully crystalline samples over 480 h in anodic polarization show a continuous current decay. Electrochemical impedance spectroscopy allows to identify that the main cause of deactivation is associated with the loss of TiO electrical conductivity, corresponding to a self-passivation mechanism. This is proposed to reflect the effect of OH ions diffusing in the TiO structure in anodic conditions by the electric field. This fact proves that a modification takes place in the defective zone of the layer, blocking the ability to transfer electrical charge through the layer. According to this mechanism, a regeneration of the degradation process is demonstrated possible based on ultraviolet illumination, which contributes to change the occupancy of TiO electronic states and to recover the defective zone's conductivity. These findings confirm the connection between the structural properties of the ALD-deposited polycrystalline layer and the degradation mechanisms and thus highlight main concerns toward fabricating long-lasting metal-oxide protective layers for frontal illuminated photoelectrodes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A low temperature solid state reaction to produce hollow MnxFe3-xO4 nanoparticles as anode for lithium-ion batteries

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Ting|||0000-0002-0317-9662
  • Liu, Junfeng|||0000-0003-3164-6472
  • Li, Junshan|||0000-0002-1482-1972
  • Zuo, Yong|||0000-0003-1564-467X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Hollow MnFeO nanoparticles (NPs) with an average size of 15 nm are produced from the solid state reaction of FeO-MnO heterostructures. These heterostructures are synthesized through the seeded-growth of MnO crystal domains on the surface of hollow FeO NPs obtained by the nanoscale Kirkendall effect. FeO-MnO heterostructures are subsequently annealed at 500 °C, enough temperature to promote the interfusion of Fe and Mn ions, but without compromising the hollow geometry. MnFeO nanostructures are tested as anode in lithium-ion batteries (LIBs), delivering large lithium storage capacities and high-rate capabilities of 1054 mAh g at 0.1 A g and 369 mAh g at 5 A g. Additionally, hollow MnFeO NPs display long cycling stability, with a capacity up to 887 mAh g at 0.3 A g after 450 cycles. The excellent performance of hollow MnFeO NPs as anode for LIBs is associated with their crystal structure, composition, and the presence of carbonized ligands, which further promote electrical conductivity and buffer the volume changes during cycling. Additionally, the small particle size and hollow morphology improves the lithium kinetics, structural stability and cycling performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Degradation and regeneration mechanisms of NiO protective layers deposited by ALD on photoanodes, About degradation and regeneration mechanisms of NiO protective layers deposited by ALD on photoanodes

  • Ros, Carles|||0000-0002-9148-2767
  • Andreu, Teresa|||0000-0002-2804-4545
  • David, Jérémy|||0000-0003-3219-149X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
The use of high pH electrolytes requires protective layers to avoid corrosion in photoanodes based on semiconductors like silicon. NiO is one of the materials that comply with the requirements for transparency, conductivity, chemical stability and catalysis on the surface in contact with the electrolyte. Here, NiO layers have been deposited by atomic layer deposition (ALD) at low temperatures, and their stability is analyzed over 1000 hours. Due to the layer structure characteristics, the best overall performance was achieved at 100 °C deposition temperature. By electrochemical measurements progressive time dependent degradation under anodic working conditions is observed, attributed to the formation of higher nickel oxidation states at the electrode/electrolyte interface as a main degradation mechanism, resulting in an OER overpotential increase. Another minor degradation mechanism affects the optical surface quality and gives rise to a loss of photon absorption efficiency on the scale of hundreds of hours. A regeneration process based on in situ periodic cyclic voltammetry, bringing the electrodes to cathodic conditions every 3, 12 or 48 hours, has been shown to partially reverse the main degradation mechanism achieving 85% stability over 1000 hours in a study with over 10 mA cm photocurrent densities.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Engineering surface states of hematite based photoanodes for boosting photoelectrochemical water splitting

  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Hematite-based photoanodes are promising candidates for photoelectrochemical water splitting. However, the performance of pristine hematite semiconductors is unsatisfactory due to charge recombination occurring at different interfaces: Back contact, bulk and semiconductor/electrolyte interfaces. Increasing efforts have been focused on enhancing the performance of hematite based photoanodes via nanostructure control, doping, heterojunction construction, and surface modification with a secondary semiconductor or an oxygen evolution electrocatalyst. Most of the previous studies attributed the enhanced PEC water splitting performance to the changes in the donor density via doping, the formation of type II heterojunction via a secondary semiconductor coating and the improved water oxidation kinetics via coating oxygen evolution electrocatalysts. However, the role of surface states presented at the semiconductor/electrolyte interfaces of hematite-based photoanodes has been overlooked in previous investigations, which virtually play a critical role in determining the photoelectrochemical water oxidation process. In this review, we summarize the recent progress of various techniques employed for the detection of surface states of hematite photoanodes and highlight the important role of modifying surface states in the development of high performance hematite based photoanodes for photoelectrochemical water splitting application. The challenges and future prospects in the study of hematite based photoanodes are also discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hollow PdAg-CeO2 heterodimer nanocrystals as highly structured heterogeneous catalysts

  • Patarroyo, Javier|||0000-0002-3703-666X
  • Delgado, Jorge A.
  • Merkoçi, Florind|||0000-0002-4925-5317
  • Genç, Aziz|||0000-0002-2888-2549
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Godard, Cyril
  • Claver, Carmen
  • Puntes, Víctor|||0000-0001-8996-9499
In the present work, hollow PdAg-CeO heterodimer nanocrystals (NCs) were prepared and tested as catalysts for the selective hydrogenation of alkynes. These nanostructures combine for the first time the beneficial effect of alloying Pd with Ag in a single NC hollow domain with the formation of active sites at the interface with the CeO counterpart in an additive manner. The PdAg-CeO NCs display excellent alkene selectivity for aliphatic alkynes. For the specific case of hydrogenation of internal alkynes such as 4-octyne, very low over-hydrogenation and isomerization products were observed over a full conversion regime, even after prolonged reaction times. These catalytic properties were remarkably superior in comparison to standard catalysts. The promotion of Ag on the moderation of the reactivity of the Pd phase, in combination with the creation of interfacial sites with the CeO moiety in the same nanostructure, is pointed as the responsible of such a remarkable catalytic performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tailoring Copper Foam with Silver Dendrite Catalysts for Highly Selective Carbon Dioxide Conversion into Carbon Monoxide

  • Urbain, Félix|||0000-0001-5423-6818
  • Tang, PengYi|||0000-0002-2306-095X
  • Carretero González, Nina Magali
  • Andreu, Teresa|||0000-0002-2804-4545
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
The present study outlines the important steps to bring electrochemical conversion of carbon dioxide (CO ) closer to commercial viability by using a large-scale metallic foam electrode as a highly conductive catalyst scaffold. Because of its versatility, it was possible to specifically tailor three-dimensional copper foam through coating with silver dendrite catalysts by electrodeposition. The requirements of high-yield CO conversion to carbon monoxide (CO) were met by tuning the deposition parameters toward a homogeneous coverage of the copper foam with nanosized dendrites, which additionally featured crystallographic surface orientations favoring CO production. The presented results evidence that Ag dendrites, owing a high density of planes with stepped (220) surface sites, paired with the superior active surface area of the copper foam can significantly foster the CO productivity. In a continuous flow-cell reactor setup, CO Faradaic efficiencies reaching from 85 to 96% for a wide range of low applied cathode potentials (<1.0 V ) along with high CO current densities up to 27 mA/cm were achieved, far outperforming other tested scaffold materials. Overall, this research provides new strategic guidelines for the fabrication of efficient and versatile cathodes for CO conversion compatible with large-scale integrated prototype devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Selective Laser-Assisted Synthesis of Tubular van der Waals Heterostructures of Single-Layered PbI2 within Carbon Nanotubes Exhibiting Carrier Photogeneration

  • Sandoval, Stefania|||0000-0002-0050-7501
  • Kepić, Dejan|||0000-0003-2777-6864
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • Gyorgy, Eniko|||0000-0001-6311-5823
  • Gómez, Andrés|||0000-0003-2847-0138
  • Pfannmoeller, Martin|||0000-0002-0910-1591
  • Tendeloo, Gustaaf V.
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Tobias, Gerard|||0000-0001-7116-2152
The electronic and optical properties of two-dimensional layered materials allow the miniaturization of nanoelectronic and optoelectronic devices in a competitive manner. Even larger opportunities arise when two or more layers of different materials are combined. Here, we report on an ultrafast energy efficient strategy, using laser irradiation, which allows bulk synthesis of crystalline single-layered lead iodide in the cavities of carbon nanotubes by forming cylindrical van der Waals heterostructures. In contrast to the filling of van der Waals solids into carbon nanotubes by conventional thermal annealing, which favors the formation of inorganic nanowires, the present strategy is highly selective toward the growth of monolayers forming lead iodide nanotubes. The irradiated bulk material bearing the nanotubes reveals a decrease of the resistivity as well as a significant increase in the current flow upon illumination. Both effects are attributed to the presence of single-walled lead iodide nanotubes in the cavities of carbon nanotubes, which dominate the properties of the whole matrix. The present study brings in a simple, ultrafast and energy efficient strategy for the tailored synthesis of rolled-up single-layers of lead iodide (i.e., single-walled PbI nanotubes), which we believe could be expanded to other two-dimensional (2D) van der Waals solids. In fact, initial tests with ZnI already reveal the formation of single-walled ZnI nanotubes, thus proving the versatility of the approach.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Engineering grain boundaries at the 2D limit for the hydrogen evolution reaction

  • He, Yongmin|||0000-0002-9347-930X
  • Tang, PengYi|||0000-0002-2306-095X
  • Hu, Zhili
  • He, Qiyuan|||0000-0001-9083-8285
  • Zhu, Chao|||0000-0002-1589-855X
  • Wang, Luqing
  • Zeng, Qingsheng
  • Golani, Prafful
  • Gao, Guanhui
  • Fu, Wei
  • Huang, Zhiqi
  • Gao, Caitian
  • Xia, Juan
  • Wang, Xingli
  • Wang, Xuewen
  • Zhu, Chao|||0000-0002-1589-855X
  • Ramasse, Quentin|||0000-0001-7466-2283
  • Zhang, Ao|||0000-0002-9427-9641
  • An, Boxing
  • Zhang, Yongzhe
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Wang, Liang|||0000-0002-3771-4627
  • Tay, Beng Kang|||0000-0002-3776-3648
  • Yakobson, Boris I.
  • Trampert, Achim|||0000-0001-7949-643X
  • Zhang, Hua|||0000-0001-9518-740X
  • Wu, Minghong|||0000-0002-9776-671X
  • Wang, Qi Jie|||0000-0002-9910-1455
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liu, Zheng|||0000-0002-8825-7198
Atom-thin transition metal dichalcogenides (TMDs) have emerged as fascinating materials and key structures for electrocatalysis. So far, their edges, dopant heteroatoms and defects have been intensively explored as active sites for the hydrogen evolution reaction (HER) to split water. However, grain boundaries (GBs), a key type of defects in TMDs, have been overlooked due to their low density and large structural variations. Here, we demonstrate the synthesis of wafer-size atom-thin TMD films with an ultra-high-density of GBs, up to ~10 12 cm -2. We propose a climb and drive 0D/2D interaction to explain the underlying growth mechanism. The electrocatalytic activity of the nanograin film is comprehensively examined by micro-electrochemical measurements, showing an excellent hydrogen-evolution performance (onset potential: -25 mV and Tafel slope: 54 mV dec -1), thus indicating an intrinsically high activation of the TMD GBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Understanding galvanic replacement reactions, the case of Pt and Ag

  • Merkoçi, Florind|||0000-0002-4925-5317
  • Patarroyo, Javier|||0000-0002-3703-666X
  • Russo, Lorenzo|||0000-0003-4094-8392
  • Piella, Jordi|||0000-0002-5788-3145
  • Genç, Aziz|||0000-0002-2888-2549
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
Synthesis of nanocrystals (NCs), where material science elements are addressed with organic chemistry precision techniques, is especially challenging and difficult to control. This difficulty arises from the increased complexity of the mineralization processes and the generation of a liquid-solid interface. These aspects, along with a strong susceptibility to reaction kinetics, ultimately translate into serious challenges for reproducibility and morphological control. By systematically varying the different parameters used to control the morphology of NCs, including complexing agents, coreducers, and cooxidants, the general reaction landscape can be mapped and the most stable and reproducible recipes can be identified. We apply this concept to the model transmetallation reaction between immiscible Pt and Ag forming hollow Pt NCs by galvanic replacement reactions. In this work, 648 synthetic recipes were performed and characterized per duplicate, from which a subset of 307 recipes leading to the controlled formation of hollow NCs were further analyzed to correlate reaction conditions with the final obtained structure and stability (reproducibility). As a result, we present robust general synthetic protocols leading to the ad hoc production of Pt-based hollow NCs with independent control of shell thickness, void size, surface roughness, and degree of porosity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

SnS2/g-C3N4/graphite nanocomposites as durable lithium-ion battery anode with high pseudocapacitance contribution

  • Zuo, Yong|||0000-0003-1564-467X
  • Xu, Xijun
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Li, Junshan|||0000-0002-1482-1972
  • Du, Ruifeng
  • Wang, Xiang
  • Han, Xu|||0000-0001-8319-8830
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Tin disulfide is a promising anode material for Li-ion batteries (LIB) owing to its high theoretical capacity and the abundance of its composing elements. However, bare SnS suffers from low electrical conductivity and large volume expansion, which results in poor rate performance and cycling stability. Herein, we present a solution-based strategy to grow SnS nanostructures within a matrix of porous g-CN (CN) and high electrical conductivity graphite plates (GPs). We test the resulting nanocomposite as anode in LIBs. First, SnS nanostructures with different geometries are tested, to find out that thin SnS nanoplates (SnS-NPLs) provide the highest performances. Such SnS-NPLs, incorporated into hierarchical SnS/CN/GP nanocomposites, display excellent rate capabilities (536.5 mA h g at 2.0 A g) and an outstanding stability (∼99.7% retention after 400 cycles), which are partially associated with a high pseudocapacitance contribution (88.8% at 1.0 mV s). The excellent electrochemical properties of these nanocomposites are ascribed to the synergy created between the three nanocomposite components: i) thin SnS-NPLs provide a large surface for rapid Li-ion intercalation and a proper geometry to stand volume expansions during lithiation/delithiation cycles; ii) porous CN prevents SnS-NPLs aggregation, habilitates efficient channels for Li-ion diffusion and buffer stresses associated to SnS volume changes; and iii) conductive GPs allow an efficient charge transport.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Large thermoelectric power variations in epitaxial thin films of layered perovskite GdBaCo2O5.5±δwith a different preferred orientation and strain

  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Leborán, Víctor|||0000-0001-9806-3234
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Rivadulla, Francisco|||0000-0003-3099-0159
  • Santiso, José|||0000-0003-4274-2101
This work describes the growth of thin epitaxial films of the layered perovskite material GdBaCoO(GBCO) on different single crystal substrates SrTiO(STO), (LaAlO)(SrTaAlO)(LSAT) and LaAlO(LAO) as an approach to study changes in the thermoelectric properties by means of the induced epitaxial strain. In addition to strain changes, the films grow with considerably different preferred orientations and domain microstructures: GBCO films on STO are purelyc-axis oriented (c) with an average 0.18% in-plane tensile strain; GBCO on LSAT is composed of domains with a mixed orientation (candc) with an average 0.71% in-plane compressive strain; while on LAO it isb-axis oriented (c) with an average 0.89% in-plane compressive strain. These differences result in important cell volume changes, as well as in the orthorhombicity of thea-bplane of the GBCO structure, which in turn induce a change in the sign and temperature dependence of the thermopower, while the electrical conductivity remains almost unchanged. In general, compressively strained films show negativeSthermopower (n-type) while tensile strained films show a positiveS(p-type) at low temperatures, probing the adaptive nature of the GdBaCoOcompound. These results point to the spontaneous generation of oxygen vacancies to partially accommodate the epitaxial stress as the main cause for this effect.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tin selenide molecular precursor for the solution processing of thermoelectric materials and devices

  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Yu|||0000-0001-7313-6740
  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Mengyao|||0000-0002-9082-7938
  • Pacios Pujadó, Merce|||0000-0002-3559-4561
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the present work, we report a solution-based strategy to produce crystallographically textured SnSe bulk nanomaterials and printed layers with optimized thermoelectric performance in the direction normal to the substrate. Our strategy is based on the formulation of a molecular precursor that can be continuously decomposed to produce a SnSe powder or printed into predefined patterns. The precursor formulation and decomposition conditions are optimized to produce pure phase 2D SnSe nanoplates. The printed layer and the bulk material obtained after hot press displays a clear preferential orientation of the crystallographic domains, resulting in an ultralow thermal conductivity of 0.55 W m-1 K-1 in the direction normal to the substrate. Such textured nanomaterials present highly anisotropic properties with the best thermoelectric performance in plane, i.e., in the directions parallel to the substrate, which coincide with the crystallographic bc plane of SnSe. This is an unfortunate characteristic because thermoelectric devices are designed to create/harvest temperature gradients in the direction normal to the substrate. We further demonstrate that this limitation can be overcome with the introduction of small amounts of tellurium in the precursor. The presence of tellurium allows one to reduce the band gap and increase both the charge carrier concentration and the mobility, especially the cross plane, with a minimal decrease of the Seebeck coefficient. These effects translate into record out of plane ZT values at 800 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Monodisperse CoSn and NiSn nanoparticles supported on commercial carbon as anode for lithium- and potassium-ion batteries

  • Li, Junshan|||0000-0002-1482-1972
  • Xu, Xijun
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Yang, Dawei|||0000-0002-3842-8286
  • Wang, Xiang
  • Luo, Zhishan|||0000-0002-0801-9238
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Monodisperse CoSn and NiSn nanoparticles were prepared in solution and supported on commercial carbon black. The obtained nanocomposites were applied as anodes for Li- and K-ion batteries. CoSn@C delivered stable average capacities of 850, 650, and 500 mAh g-1 at 0.2, 1.0, and 2.0 A g-1, respectively, well above those of commercial graphite anodes. The capacity of NiSn@C retained up to 575 mAh g-1 at a current of 1.0 A g-1 over 200 continuous cycles. Up to 74.5 and 69.7% pseudocapacitance contributions for Li-ion batteries were measured for CoSn@C and NiSn@C, respectively, at 1.0 mV s-1. CoSn@C was further tested in full-cell lithium-ion batteries with a LiFePO4 cathode to yield a stable capacity of 350 mAh g-1 at a rate of 0.2 A g-1. As electrode in K-ion batteries, CoSn@C composites presented a stable capacity of around 200 mAh g-1 at 0.2 A g-1 over 400 continuous cycles, and NiSn@C delivered a lower capacity of around 100 mAh g-1 over 300 cycles.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

GaAs nanoscale membranes, prospects for seamless integration of III-Vs on silicon

  • Raya, Andrés M.|||0000-0002-6619-8967
  • Friedl, Martin
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Dubrovskii, Vladimir G.|||0000-0003-2088-7158
  • Francaviglia, Luca|||0000-0002-2138-0837
  • Alén, Benito
  • Morgan, Nicholas
  • Tütüncüoglu, Gözde
  • Ramasse, Quentin|||0000-0001-7466-2283
  • Fuster Signes, David
  • Llorens, José M.
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
The growth of compound semiconductors on silicon has been widely sought after for decades, but reliable methods for defect-free combination of these materials have remained elusive. Recently, interconnected GaAs nanoscale membranes have been used as templates for the scalable integration of nanowire networks on III-V substrates. Here, we demonstrate how GaAs nanoscale membranes can be seamlessly integrated on silicon by controlling the density of nuclei in the initial stages of growth. We also correlate the absence or presence of defects with the existence of a single or multiple nucleation regime for the single membranes. Certain defects exhibit well-differentiated spectroscopic features that we identify with cathodoluminescence and micro-photoluminescence techniques. Overall, this work presents a new approach for the seamless integration of compound semiconductors on silicon.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Rhodium as efficient additive for boosting acetone sensing by TiO2 nanocrystals. Beyond the classical view of noble metal additives

  • Epifani, Mauro|||0000-0002-9242-6484
  • Kaciulis, Saulius|||0000-0002-9868-7626
  • Mezzi, Alessio|||0000-0002-2887-520X
  • Zhang, Ting
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Siciliano, Pietro|||0000-0001-9748-0925
  • Landström, Anton|||0000-0003-2099-7605
  • Concina, Isabella
  • Moumen, Abderrahim
  • Comini, Elisabetta|||0000-0003-2559-5197
  • Xiangfeng, Chu|||0000-0003-0402-626X
Anatase TiO nanocrystals were prepared by solvothermal synthesis and modified by in- situ generated Rh nanoparticles, with a starting nominal Rh:Ti atomic concentration of 0.01 and 0.05. After heat-treatment at 400 °C the TiO host was still in the anatase crystallographic phase, embedding Rh nanoparticles homogeneously distributed and whose surface had been oxidized to RhO, as established by X-ray diffraction, Transmission Electron Microscopy and X-ray Photoelectron spectroscopy. Moreover, Rh seemed also homogeneously distributed in elemental form or as RhO nanoclusters. The acetone sensing properties of the resulting materials were enhanced by Rh addition, featuring a response increase of one order of magnitude at the best operating temperature of 300 °C. Moreover, Rh addition enlarged the detection range down to 10 ppm whereas pure TiO was not able of giving an appreciable response already at a concentration as high as 50 ppm. From the sensing data, the enhancement of the sensor response was attributed to the finely dispersed Rh species and not to the oxidized Rh nanocrystals.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Semiconductor-ferromagnetic insulator-superconductor nanowires, stray field and exchange field

  • Liu, Yu|||0000-0001-7313-6740
  • Vaitiekenas, Saulius
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Koch, Christian
  • Hart, Sean
  • Cui, Zheng
  • Kanne, Thomas
  • Khan, Sabbir A.|||0000-0003-1279-7638
  • Tanta, Rawa
  • Upadhyay, Shivendra
  • Cachaza, Martin Espiñeira
  • Marcus, Charles M.
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Moler, Kathryn A.
  • Krogstrup, Peter|||0000-0002-1930-8553
Nanowires can serve as flexible substrates for hybrid epitaxial growth on selected facets, allowing for the design of heterostructures with complex material combinations and geometries. In this work we report on hybrid epitaxy of freestanding vapor-liquid-solid grown and in-plane selective area grown semiconductor-ferromagnetic insulator-superconductor (InAs/EuS/Al) nanowire heterostructures. We study the crystal growth and complex epitaxial matching of wurtzite and zinc-blende InAs/rock-salt EuS interfaces as well as rock-salt EuS/face-centered cubic Al interfaces. Because of the magnetic anisotropy originating from the nanowire shape, the magnetic structure of the EuS phase is easily tuned into single magnetic domains. This effect efficiently ejects the stray field lines along the nanowires. With tunnel spectroscopy measurements of the density of states, we show that the material has a hard induced superconducting gap, and magnetic hysteretic evolution which indicates that the magnetic exchange fields are not negligible. These hybrid nanowires fulfill key material requirements for serving as a platform for spin-based quantum applications, such as scalable topological quantum computing.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Selective methanol-to-formate electrocatalytic conversion on branched nickel carbide

  • Li, Junshan|||0000-0002-1482-1972
  • Wei, Ruilin
  • Wang, Xiang
  • Zuo, Yong|||0000-0003-1564-467X
  • Han, Xu|||0000-0001-8319-8830
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Yang, Yaoyue|||0000-0002-4573-9437
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Cui, Chunhua|||0000-0002-2774-1576
A methanol economy will be favored by the availability of low-cost catalysts able to selectively oxidize methanol to formate. This selective oxidation would allow extraction of the largest part of the fuel energy while concurrently producing a chemical with even higher commercial value than the fuel itself. Herein, we present a highly active methanol electrooxidation catalyst based on abundant elements and with an optimized structure to simultaneously maximize interaction with the electrolyte and mobility of charge carriers. In situ infrared spectroscopy combined with nuclear magnetic resonance spectroscopy showed that branched nickel carbide particles are the first catalyst determined to have nearly 100 % electrochemical conversion of methanol to formate without generating detectable CO as a byproduct. Electrochemical kinetics analysis revealed the optimized reaction conditions and the electrode delivered excellent activities. This work provides a straightforward and cost-efficient way for the conversion of organic small molecules and the first direct evidence of a selective formate reaction pathway.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stability of Pd3Pb nanocubes during electrocatalytic thanol oxidation

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Li, Junshan|||0000-0002-1482-1972
  • Wang, Xiang
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liu, Junfeng|||0000-0003-3164-6472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Intermetallic PdPb nanocrystals with controlled size and cubic geometry exposing (100) facets are synthesized and tested as electrocatalysts for ethanol oxidation in alkaline media. We observe the ethanol oxidation activity and stability to be size-dependent. The 10 nm PdPb nanocrystals display the highest initial current densities, but after few hundred cycles, the current density of smaller nanocrystals becomes much larger. All of the catalysts exhibit a pronounced current decay during the first 500 s of continuous operation, which is associated with the accumulation of strongly adsorbed reaction intermediates, blocking reaction sites. These adsorbed species can be removed by cycling the catalysts or maintaining them at slightly higher potentials for a short period of time to oxidize and later reduce the Pd surface. Such simple cleaning processes, that can be performed during operation breaks without cell disassembly, is sufficient to effectively remove the poisoning species adsorbed on the surface and recover the electrocatalytic activity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Charge transfer in steam purified arc discharge single walled carbon nanotubes filled with lutetium halides

  • Santidrián, Ana|||0000-0002-6964-4096
  • Kierkowicz, Magdalena
  • Pach, Elzbieta|||0000-0001-9587-3768
  • Darvasiová, Denisa
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Tobias, Gerard|||0000-0001-7116-2152
  • Kalbáč, Martin|||0000-0001-9574-4368
In the present work, the effect of doping on electronic properties in bulk purified and filled arc-discharge single-walled carbon nanotubes samples is studied for the first time by in situ Raman spectroelectrochemical method. A major challenge to turn the potential of SWCNTs into customer applications is to reduce or eliminate their contaminants by means of purification techniques. Besides, the endohedral functionalization of SWCNTs with organic and inorganic materials (i.e. metal halides) allows the development of tailored functional hybrids. Here, we report the purification and endohedral functionalization of SWCNTs with doping affecting the SWCNTs. Steam-purified SWCNTs have been filled with selected lutetium(iii) halides, LuCl, LuBr, LuI, and sealed using high-temperature treatment, yielding closed-ended SWCNTs with the filling material confined in the inner cavity. The purified SWCNTs were studied using TGA, EDX, STEM and Raman spectroscopy. The lutetium(iii) halide-filled SWCNTs (LuX@SWCNTs) were characterized using STEM, EDX, Raman spectroscopy and in situ Raman spectroelectrochemistry. It was found that there is a charge transfer between the SWCNTs and the encapsulated LuX (X = Cl, Br, I). The obtained data testify to the acceptor doping effect of lutetium(iii) halides incorporated into the SWCNT channels, which is accompanied by the charge transfer from nanotube walls to the introduced substances.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cobalt hexacyanoferrate as a selective and high current density formate oxidation electrocatalyst

  • Han, Lijuan
  • González-Cobos, Jesús|||0000-0003-0885-5815
  • Sánchez-Molina, Irene
  • Giancola, Stefano
  • Folkman, Scott J.|||0000-0002-8124-7253
  • Tang, PengYi|||0000-0002-2306-095X
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Giménez, Sixto|||0000-0002-4522-3174
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
Herein we report the selectivity, stability, and electrochemical characterization of cobalt hexacyanoferrate, the Co-Fe Prussian Blue derivative (CoFePB), as a formate/formic acid oxidation electrocatalyst in aqueous media. CoFePB is able to quantitatively catalyze (100% Faradaic efficiency within less than 8% standard error at pH 5) the electrochemical oxidation of formate to CO2 over a pH range of 1-13. This quantitative formate elecrooxidation is possible due to the exclusive selectivity of the catalyst in a wide potential window (from ca. 1.2 to 1.7 V vs RHE), where no other substrate in aqueous conditions is activated: neither other organic molecules, such as alcohols or acids, nor water itself. CoFePB is one of the first heterogeneous noble-metal-free catalysts reported for the electrooxidation of small hydrocarbon molecules. Importantly, the catalyst showed a very high tolerance against surface poisoning during the reaction, as supported by the cyclic voltammetry and electrochemical impedance spectroscopy data, thereby allowing CoFePB to operate at greater current density than state-of-the-art noble metal catalysts. For example, we observed that CoFePB is able to achieve a formate oxidation current ∼10 mA cm-2 at pH 5, 0.4 M formate at 1.4 V vs RHE, whereas a Pt disk and Pd(5%)/C electrodes had currents of 0.4 and 1.4 mA cm-2, respectively, under identical conditions. The remarkable selectivity, stability, and high current density of CoFePB, in contrast to state-of-the-art catalysts based on platinum-group metals, is an important step in the search for inexpensive earth-abundant materials for oxidation of organic molecules for use in liquid fuel cells or for selective organic molecule sensors. Furthermore, because CoFePB is not poisoned by intermediates and can achieve higher current density than Pt or Pd, improvement of the catalyst onset potential can lead to higher power density formate oxidation fuel cells using earth-abundant metals than with Pt or Pd.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phosphorous incorporation in Pd₂Sn alloys for electrocatalytic ethanol oxidation

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Liu, Junfeng|||0000-0003-3164-6472
  • Li, Junshan|||0000-0002-1482-1972
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zuo, Yong|||0000-0003-1564-467X
  • Xing, Congcong|||0000-0001-7674-6720
  • Llorca, Jordi|||0000-0002-7447-9582
  • Nasiou, Déspina
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Pan, Kai
  • Kleinhanns, Tobias
  • Xie, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Direct ethanol fuel cells (DEFCs) show a huge potential to power future electric vehicles and portable electronics, but their deployment is currently limited by the unavailability of proper electrocatalysis for the ethanol oxidation reaction (EOR). In this work, we engineer a new electrocatalyst by incorporating phosphorous into a palladium-tin alloy and demonstrate a significant performance improvement toward EOR. We first detail a synthetic method to produce Pd₂Sn:P nanocrystals that incorporate 35% of phosphorus. These nanoparticles are supported on carbon black and tested for EOR. Pd₂Sn:P/C catalysts exhibit mass current densities up to 5.03 A mg , well above those of Pd₂Sn/C, Pd₂P/C and Pd/C reference catalysts. Furthermore, a twofold lower Tafel slope and a much longer durability are revealed for the Pd₂Sn:P/C catalyst compared with Pd/C. The performance improvement is rationalized with the aid of density functional theory (DFT) calculations considering different phosphorous chemical environments. Depending on its oxidation state, surface phosphorus introduces sites with low energy OH adsorption and/or strongly influences the electronic structure of palladium and tin to facilitate the oxidation of the acetyl to acetic acid, which is considered the EOR rate limiting step. DFT calculations also points out that the durability improvement of Pd₂Sn:P/C catalyst is associated to the promotion of OH adsorption that accelerates the oxidation of intermediate poisoning CO, reactivating the catalyst surface.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Coherent epitaxial semiconductor-ferromagnetic insulator InAs/EuS interfaces, band alignment and magnetic structure

  • Liu, Yu|||0000-0001-7313-6740
  • Luchini, Alessandra|||0000-0003-2380-6069
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Koch, Christian
  • Schuwalow, Sergej
  • Khan, Sabbir A.|||0000-0003-1279-7638
  • Stankevič, Tomas
  • Francoual, Sonia
  • Mardegan, Jose R. L.
  • Krieger, Jonas A.
  • Strocov, Vladimir N.
  • Stahn, Jochen
  • Vaz, Carlos A. F.|||0000-0002-6209-8918
  • Ramakrishnan, Mahesh
  • Staub, Urs
  • Lefmann, Kim
  • Aeppli, Gabriel
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Krogstrup, Peter|||0000-0002-1930-8553
Hybrid semiconductor-ferromagnetic insulator heterostructures are interesting due to their tunable electronic transport, self-sustained stray field, and local proximitized magnetic exchange. In this work, we present lattice-matched hybrid epitaxy of semiconductor-ferromagnetic insulator InAs/EuS heterostructures and analyze the atomic-scale structure and their electronic and magnetic characteristics. The Fermi level at the InAs/EuS interface is found to be close to the InAs conduction band and in the band gap of EuS, thus preserving the semiconducting properties. Both neutron and X-ray reflectivity measurements show that the overall ferromagnetic component is mainly localized in the EuS thin film with a suppression of the Eu moment in the EuS layer nearest the InAs and magnetic moments outside the detection limits on the pure InAs side. This work presents a step toward realizing defect-free semiconductor-ferromagnetic insulator epitaxial hybrids for spin-lifted quantum and spintronic applications without external magnetic fields.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

3D ordering at the liquid-solid polar interface of nanowires

  • Zamani, Mahdi|||0000-0003-0750-2938
  • Imbalzano, Giulio
  • Tappy, Nicolas
  • Alexander, Duncan T. L.|||0000-0003-4350-8587
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Ghisalberti, Lea
  • Ramasse, Quentin|||0000-0001-7466-2283
  • Friedl, Martin
  • Tütüncüoglu, Gözde
  • Francaviglia, Luca|||0000-0002-2138-0837
  • Bienvenue, Sebastien
  • Hébert, Cécile
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ceriotti, Michele
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
The nature of the liquid-solid interface determines the characteristics of a variety of physical phenomena, including catalysis, electrochemistry, lubrication, and crystal growth. Most of the established models for crystal growth are based on macroscopic thermodynamics, neglecting the atomistic nature of the liquid-solid interface. Here, experimental observations and molecular dynamics simulations are employed to identify the 3D nature of an atomic-scale ordering of liquid Ga in contact with solid GaAs in a nanowire growth configuration. An interplay between the liquid ordering and the formation of a new bilayer is revealed, which, contrary to the established theories, suggests that the preference for a certain polarity and polytypism is influenced by the atomic structure of the interface. The conclusions of this work open new avenues for the understanding of crystal growth, as well as other processes and systems involving a liquid-solid interface.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A SnS2 molecular precursor for conformal nanostructured coatings

  • Zuo, Yong|||0000-0003-1564-467X
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Ting|||0000-0002-0317-9662
  • Wang, Xiang
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We present a simple, versatile, and scalable procedure to produce SnS nanostructured layers based on an amine/thiol-based molecular ink. The ratios amine/thiol and Sn/S, and the reaction conditions, are systematically investigated to produce phase-pure SnS planar and conformal layers with a tremella-like SnS morphology. Such nanostructured layers are characterized by excellent photocurrent densities. The same strategy can be used to produce SnS-graphene composites by simply introducing graphene oxide (GO) into the initial solution. Conveniently, the solvent mixture is able to simultaneously dissolve the Sn and Se powders and reduce the GO. Furthermore, SnSSe ternary coatings and phase-pure SnSe can be easily produced by simply incorporating proper amounts of Se into the initial ink formulation. Finally, the potential of this precursor ink to produce gram-scale amounts of unsupported SnS is investigated._.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Exploiting the lability of metal halide perovskites for doping semiconductor nanocomposites

  • Calcabrini, Mariano|||0000-0003-4566-5877
  • Genç, Aziz|||0000-0002-2888-2549
  • Liu, Yu|||0000-0001-7313-6740
  • Kleinhanns, Tobias
  • Lee, Seungho|||0000-0002-6962-8598
  • Dirin, Dmitry N.|||0000-0002-5187-4555
  • Akkerman, Quinten A.
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
Cesium lead halides have intrinsically unstable crystal lattices and easily transform within perovskite and nonperovskite structures. In this work, we explore the conversion of the perovskite CsPbBr into CsPbBr in the presence of PbS at 450 °C to produce doped nanocrystal-based composites with embedded CsPbBr nanoprecipitates. We show that PbBr is extracted from CsPbBr and diffuses into the PbS lattice with a consequent increase in the concentration of free charge carriers. This new doping strategy enables the adjustment of the density of charge carriers between 10 19 and 10 20 cm -3, and it may serve as a general strategy for doping other nanocrystal-based semiconductors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Decoupling the effects of defects on efficiency and stability through phosphonates in stable halide perovskite solar cells

  • Xie, Haibing|||0000-0002-5070-2882
  • Wang, Zaiwei
  • Chen, Zehua
  • Pereyra, Carlos
  • Pols, Mike
  • Gałkowski, Krzysztof
  • Anaya, Miguel
  • Fu, Shuai|||0000-0003-4038-2384
  • Jia, Xiaoyu
  • Tang, PengYi|||0000-0002-2306-095X
  • Kubicki, Dominik Józef
  • Agarwalla, Anand
  • Kim, Hui-Seon|||0000-0002-9928-3033
  • Prochowicz, Daniel
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Bonn, Mischa|||0000-0001-6851-8453
  • Bao, Chunxiong
  • Sun, Xiaoxiao
  • Zakeeruddin, Shaik Mohammed|||0000-0003-0655-4744
  • Emsley, Lyndon
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Gao, Feng
  • Fu, Fan
  • Wang, Hai I.|||0000-0003-0940-3984
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
  • Stranks, Samuel D.|||0000-0002-8303-7292
  • Tao, Shuxia
  • Grätzel, Michael|||0000-0002-0068-0195
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Understanding defects is of paramount importance for the development of stable halide perovskite solar cells (PSCs). However, isolating their distinctive effects on device efficiency and stability is currently a challenge. We report that adding the organic molecule 3-phosphonopropionic acid (H3pp) to the halide perovskite results in unchanged overall optoelectronic performance while having a tremendous effect on device stability. We obtained PSCs with ∼21% efficiency that retain ∼100% of the initial efficiency after 1,000 h at the maximum power point under simulated AM1.5G illumination. The strong interaction between the perovskite and the H3pp molecule through two types of hydrogen bonds (HI and OH) leads to shallow point defect passivation that has a significant effect on device stability but not on the non-radiative recombination and device efficiency. We expect that our work will have important implications for the current understanding and advancement of operational PSCs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Photodehydrogenation of ethanol over CuO/TiO heterostructures

  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Guardia, Pablo|||0000-0001-9076-4642
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The photodehydrogenation of ethanol is a sustainable and potentially cost-effective strategy to produce hydrogen and acetaldehyde from renewable resources. The optimization of this process requires the use of highly active, stable and selective photocatalytic materials based on abundant elements and the proper adjustment of the reaction conditions, including temperature. In this work, CuO-TiO type-II heterojunctions with different CuO amounts are obtained by a one-pot hydrothermal method. The structural and chemical properties of the produced materials and their activity toward ethanol photodehydrogenation under UV and visible light illumination are evaluated. The CuO-TiO photocatalysts exhibit a high selectivity toward acetaldehyde production and up to tenfold higher hydrogen evolution rates compared to bare TiO. We further discern here the influence of temperature and visible light absorption on the photocatalytic performance. Our results point toward the combination of energy sources in thermo-photocatalytic reactors as an efficient strategy for solar energy conversion.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

MOF-derived ultrathin cobalt molybdenum phosphide nanosheets for efficient electrochemical overall water splitting

  • Wang, Xiang
  • Yang, Linlin|||0009-0006-9953-5698
  • Xing, Congcong|||0000-0001-7674-6720
  • Han, Xu|||0000-0001-8319-8830
  • Du, Ruifeng
  • He, Ren|||0000-0003-3712-5539
  • Guardia, Pablo|||0000-0001-9076-4642
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of high-performance and cost-effective earth-abundant transition metal-based electrocatalysts is of major interest for several key energy technologies, including water splitting. Herein, we report the synthesis of ultrathin CoMoP nanosheets through a simple ion etching and phosphorization method. The obtained catalyst exhibits outstanding electrocatalytic activity and stability towards oxygen and hydrogen evolution reactions (OER and HER), with overpotentials down to 273 and 89 mV at 10 mA cm -2, respectively. The produced CoMoP nanosheets are also characterized by very small Tafel slopes, 54.9 and 69.7 mV dec -1 for OER and HER, respectively. When used as both cathode and anode electrocatalyst in the overall water splitting reaction, CoMoP-based cells require just 1.56 V to reach 10 mA cm -2 in alkaline media. This outstanding performance is attributed to the proper composition, weak crystallinity and two-dimensional nanosheet structure of the electrocatalyst.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Rotated domains in selective area epitaxy grown ZnP, formation mechanism and functionality

  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Escobar Steinvall, Simon|||0000-0003-4993-2979
  • Dzade, Nelson Y.|||0000-0001-7733-9473
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Torres-Vila, Pol
  • Stutz, Elias Z.|||0000-0003-1079-8063
  • Zamani, Mahdi|||0000-0003-0750-2938
  • Paul, Rajrupa
  • Leran, Jean-Baptiste
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Zinc phosphide (ZnP) is an ideal absorber candidate for solar cells thanks to its direct bandgap, earth-abundance, and optoelectronic characteristics, albeit it has been insufficiently investigated due to limitations in the fabrication of high-quality material. It is possible to overcome these factors by obtaining the material as nanostructures, e.g. via the selective area epitaxy approach, enabling additional strain relaxation mechanisms and minimizing the interface area. We demonstrate that ZnP nanowires grow mostly defect-free when growth is oriented along the [100] and [110] of the crystal, which is obtained in nanoscale openings along the [110] and [010] on InP(100). We detect the presence of two stable rotated crystal domains that coexist in the structure. They are due to a change in the growth facet, which originates either from the island formation and merging in the initial stages of growth or lateral overgrowth. These domains have been visualized through 3D atomic models and confirmed with image simulations of the atomic scale electron micrographs. Density functional theory simulations describe the rotated domains' formation mechanism and demonstrate their lattice-matched epitaxial relation. In addition, the energies of the shallow states predicted closely agree with transition energies observed by experimental studies and offer a potential origin for these defect transitions. Our study represents an important step forward in the understanding of ZnP and thus for the realisation of solar cells to respond to the present call for sustainable photovoltaic technology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sustainable oxygen evolution electrocatalysis in aqueous 1 M HSO with earth abundant nanostructured CoO

  • Yu, Jiahao|||0000-0003-3707-7047
  • Garcés-Pineda, Felipe A.|||0000-0001-5759-9980
  • González-Cobos, Jesús|||0000-0003-0885-5815
  • Peña-Díaz, Marina|||0000-0001-9309-6272
  • Rogero, Celia|||0000-0002-2812-8853
  • Giménez, Sixto|||0000-0002-4522-3174
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Barja, Sara|||0000-0002-4257-2651
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
Earth-abundant electrocatalysts for the oxygen evolution reaction (OER) able to work in acidic working conditions are elusive. While many first-row transition metal oxides are competitive in alkaline media, most of them just dissolve or become inactive at high proton concentrations where hydrogen evolution is preferred. Only noble-metal catalysts, such as IrO2, are fast and stable enough in acidic media. Herein, we report the excellent activity and long-term stability of Co3O4-based anodes in 1 M H2SO4 (pH 0.1) when processed in a partially hydrophobic carbon-based protecting matrix. These Co3O4@C composites reliably drive O2 evolution a 10 mA cm-2 current density for >40 h without appearance of performance fatigue, successfully passing benchmarking protocols without incorporating noble metals. Our strategy opens an alternative venue towards fast, energy efficient acid-media water oxidation electrodes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Engineering the Interfacial Microenvironment via Surface Hydroxylation to Realize the Global Optimization of Electrochemical CO Reduction

  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Zhang, Xuan|||0000-0002-3667-4280
  • Li, Jian
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Tang, PengYi|||0000-0002-2306-095X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The adsorption and activation of CO on the electrode interface is a prerequisite and key step for electrocatalytic CO reduction reaction (eCO RR). Regulating the interfacial microenvironment to promote the adsorption and activation of CO is thus of great significance to optimize overall conversion efficiency. Herein, a CO-philic hydroxyl coordinated ZnO (ZnO-OH) catalyst is fabricated, for the first time, via a facile MOF-assisted method. In comparison to the commercial ZnO, the as-prepared ZnO-OH exhibits much higher selectivity toward CO at lower applied potential, reaching a Faradaic efficiency of 85% at -0.95 V versus RHE. To the best of our knowledge, such selectivity is one of the best records in ZnO-based catalysts reported till date. Density functional theory calculations reveal that the coordinated surficial -OH groups are not only favorable to interact with CO molecules but also function in synergy to decrease the energy barrier of the rate-determining step and maintain a higher charge density of potential active sites as well as inhibit undesired hydrogen evolution reaction. Our results indicate that engineering the interfacial microenvironment through the introduction of CO-philic groups is a promising way to achieve the global optimization of eCO RR via promoting adsorption and activation of CO.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sub-nanometer mapping of strain-induced band structure variations in planar nanowire core-shell heterostructures

  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Botifoll, Marc|||0000-0002-4876-6393
  • Oksenberg, Eitan|||0000-0001-9462-3986
  • Koch, Christian|||0000-0002-2655-7363
  • Borja, Carla
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Di Giulio, Valerio
  • Ramasse, Quentin|||0000-0001-7466-2283
  • García de Abajo, F. Javier
  • Joselevich, Ernesto|||0000-0002-9919-0734
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Strain relaxation mechanisms during epitaxial growth of core-shell nanostructures play a key role in determining their morphologies, crystal structure and properties. To unveil those mechanisms, we perform atomic-scale aberration-corrected scanning transmission electron microscopy studies on planar core-shell ZnSe@ZnTe nanowires on α-AlO substrates. The core morphology affects the shell structure involving plane bending and the formation of low-angle polar boundaries. The origin of this phenomenon and its consequences on the electronic band structure are discussed. We further use monochromated valence electron energy-loss spectroscopy to obtain spatially resolved band-gap maps of the heterostructure with sub-nanometer spatial resolution. A decrease in band-gap energy at highly strained core-shell interfacial regions is found, along with a switch from direct to indirect band-gap. These findings represent an advance in the sub-nanometer-scale understanding of the interplay between structure and electronic properties associated with highly mismatched semiconductor heterostructures, especially with those related to the planar growth of heterostructured nanowire networks. Planar growth of nanowire arrays involves interactions between materials that affect the electronic behavior of the effective heterojunction. Here, authors show how core curvature and cross-section morphology affect shell growth, demonstrating how strain at the core-shell interface induces electronic band modulations in ZnSe@ZnTe nanowires.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

2D/2D heterojunction of TiO2 nanoparticles and ultrathin G-C3N4 nanosheets for efficient photocatalytic hydrogen evolution

  • Du, Ruifeng
  • Li, Baoying
  • Han, Xu|||0000-0001-8319-8830
  • Xiao, Ke
  • Wang, Xiang
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Photocatalytic hydrogen evolution is considered one of the promising routes to solve the energy and environmental crises. However, developing efficient and low-cost photocatalysts remains an unsolved challenge. In this work, ultrathin 2D g-CN nanosheets are coupled with flat TiO nanoparticles as face-to-face 2D/2D heterojunction photocatalysts through a simple electrostatic self-assembly method. Compared with g-CN and pure TiO nanosheets, 2D/2D TiO/g-CN heterojunctions exhibit effective charge separation and transport properties that translate into outstanding photocatalytic performances. With the optimized heterostructure composition, stable hydrogen evolution activities are threefold and fourfold higher than those of pure TiO and g-CN are consistently obtained. Benefiting from the favorable 2D/2D heterojunction structure, the TiO/g-CN photocatalyst yields H evolution rates up to 3875 μmol·g -1 ·h -1 with an AQE of 7.16% at 380 nm.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Defect engineering in solution-processed polycrystalline SnSe leads to high thermoelectric performance

  • Liu, Yu|||0000-0001-7313-6740
  • Calcabrini, Mariano|||0000-0003-4566-5877
  • Yu, Yuan|||0000-0002-3148-6600
  • Lee, Seungho|||0000-0002-6962-8598
  • Chang, Cheng|||0000-0002-9515-4277
  • David, Jérémy|||0000-0003-3219-149X
  • Ghosh, Tanmoy
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Xie, Chenyang
  • Cojocaru-Mirédin, Oana|||0000-0001-6543-203X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
SnSe has emerged as one of the most promising materials for thermoelectric energy conversion due to its extraordinary performance in its single-crystal form and its low-cost constituent elements. However, to achieve an economic impact, the polycrystalline counterpart needs to replicate the performance of the single crystal. Herein, we optimize the thermoelectric performance of polycrystalline SnSe produced by consolidating solution-processed and surface-engineered SnSe particles. In particular, the SnSe particles are coated with CdSe molecular complexes that crystallize during the sintering process, forming CdSe nanoparticles. The presence of CdSe nanoparticles inhibits SnSe grain growth during the consolidation step due to Zener pinning, yielding a material with a high density of grain boundaries. Moreover, the resulting SnSe-CdSe nanocomposites present a large number of defects at different length scales, which significantly reduce the thermal conductivity. The produced SnSe-CdSe nanocomposites exhibit thermoelectric figures of merit up to 2.2 at 786 K, which is among the highest reported for solution-processed SnSe.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Heat-Up Colloidal Synthesis of Shape-Controlled Cu-Se-S Nanostructures-Role of Precursor and Surfactant Reactivity and Performance in N Electroreduction

  • Mourdikoudis, Stefanos|||0000-0001-7187-5128
  • Antonaropoulos, George|||0000-0003-0214-8327
  • Antonatos, Nikolas|||0000-0003-2563-9970
  • Rosado, Marcos|||0000-0003-3938-9132
  • Storozhuk, Liudmyla|||0000-0002-9602-4933
  • Takahashi, Mari
  • Maenosono, Shinya
  • Luxa, Jan
  • Sofer, Zdeněk
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Thanh, Nguyen Thi Kim|||0000-0002-4131-5952
  • Lappas, Alexandros|||0000-0001-8486-0312
Copper selenide-sulfide nanostructures were synthesized using metal-organic chemical routes in the presence of Cu- and Se-precursors as well as S-containing compounds. Our goal was first to examine if the initial Cu/Se 1:1 molar proportion in the starting reagents would always lead to equiatomic composition in the final product, depending on other synthesis parameters which affect the reagents reactivity. Such reaction conditions were the types of precursors, surfactants and other reagents, as well as the synthesis temperature. The use of 'hot-injection' processes was avoided, focusing on 'non-injection' ones; that is, only heat-up protocols were employed, which have the advantage of simple operation and scalability. All reagents were mixed at room temperature followed by further heating to a selected high temperature. It was found that for samples with particles of bigger size and anisotropic shape the CuSe composition was favored, whereas particles with smaller size and spherical shape possessed a CuSe phase, especially when no sulfur was present. Apart from elemental Se, AlSe was used as an efficient selenium source for the first time for the acquisition of copper selenide nanostructures. The use of dodecanethiol in the presence of trioctylphosphine and elemental Se promoted the incorporation of sulfur in the materials crystal lattice, leading to Cu-Se-S compositions. A variety of techniques were used to characterize the formed nanomaterials such as XRD, TEM, HRTEM, STEM-EDX, AFM and UV-Vis-NIR. Promising results, especially for thin anisotropic nanoplates for use as electrocatalysts in nitrogen reduction reaction (NRR), were obtained.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced Thermoelectric Performance of n-Type BiSe Nanosheets through Sn Doping

  • Li, Mengyao|||0000-0002-9082-7938
  • Zhang, Yu|||0000-0002-0332-0013
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Xiao, Ke
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Yu|||0000-0001-7313-6740
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The cost-effective conversion of low-grade heat into electricity using thermoelectric devices requires developing alternative materials and material processing technologies able to reduce the currently high device manufacturing costs. In this direction, thermoelectric materials that do not rely on rare or toxic elements such as tellurium or lead need to be produced using high-throughput technologies not involving high temperatures and long processes. BiSe is an obvious possible Te-free alternative to BiTe for ambient temperature thermoelectric applications, but its performance is still low for practical applications, and additional efforts toward finding proper dopants are required. Here, we report a scalable method to produce BiSe nanosheets at low synthesis temperatures. We studied the influence of different dopants on the thermoelectric properties of this material. Among the elements tested, we demonstrated that Sn doping resulted in the best performance. Sn incorporation resulted in a significant improvement to the BiSe Seebeck coefficient and a reduction in the thermal conductivity in the direction of the hot-press axis, resulting in an overall 60% improvement in the thermoelectric figure of merit of BiSe.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Direct observation of the chemical transformations in BiVO4 photoanodes upon prolonged light-aging treatments

  • Arcas, Ramón
  • Cardenas-Morcoso, Drialys
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • García-Tecedor, Miguel|||0000-0002-9664-4665
  • Mesa, Camilo A.|||0000-0002-8450-2563
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fabregat-Santiago, Francisco
  • Giménez, Sixto|||0000-0002-4522-3174
  • Mas-Marzá, Elena
Exposing BiVO photoanodes to light-aging treatments is known to produce a significant photocurrent enhancement. Until now, the interpretation given to this phenomenon is associated to the formation of oxygen vacancies and little is reported about chemical changes in the material. Herein, the chemical segregation of Bi species toward the surface upon light-aging treatment is demonstrated, which takes place with the concomitant formation of intra-bandgap states associated to the oxygen vacancies. It is further demonstrated that these intra-bandgap states are photoactive and generate photocurrent under infrared excitation. These results highlight the importance of understanding light-induced effects while employing multinary metal oxide photoelectrodes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Site-specific axial oxygen coordinated FeN4 active sites for highly selective electroreduction of carbon dioxide

  • Zhang, Ting|||0000-0002-0317-9662
  • Han, Xu|||0000-0001-8319-8830
  • Liu, Hong|||0000-0003-3165-8764
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Li, Jian|||0000-0003-3060-0501
  • Zhang, Xuan
  • Tang, Penguy
  • Yang, Bo|||0000-0001-6904-6646
  • Zheng, Lirong
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Regulating the coordination environment via heteroatoms to break the symmetrical electronic structure of M-N active sites provides a promising route to engineer metal-nitrogen-carbon catalysts for electrochemical CO reduction reaction. However, it remains challenging to realize a site-specific introduction of heteroatoms at atomic level due to their energetically unstable nature. Here, this paper reports a facile route via using an oxygen- and nitrogen-rich metal-organic framework (MOF) (IRMOF-3) as the precursor to construct the Fe-O and Fe-N chelation, simultaneously, resulting in an atomically dispersed axial O-coordinated FeN active site. Compared to the FeN active sites without O coordination, the formed FeN-O sites exhibit much better catalytic performance toward CO, reaching a maximum FE of 95% at -0.50 V versus reversible hydrogen electrode. To the best of the authors' knowledge, such performance exceeds that of the existing Fe-N-C-based catalysts derived from sole N-rich MOFs. Density functional theory calculations indicate that the axial O-coordination regulates the binding energy of intermediates in the reaction pathways, resulting in a smoother desorption of CO and increased energy for the competitive hydrogen production.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stoichiometry modulates the optoelectronic functionality of zinc phosphide (Zn3-xP2+x)

  • Stutz, Elias Z.|||0000-0003-1079-8063
  • Ramanandan, Santhanu Panikar|||0000-0003-2832-8641
  • Flór, Mischa|||0000-0001-9871-4746
  • Paul, Rajrupa
  • Zamani, Mahdi|||0000-0003-0750-2938
  • Escobar Steinvall, Simon|||0000-0003-4993-2979
  • Sandoval Salaiza, Diego Armando
  • Xifra Montesinos, Clàudia
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Leran, Jean-Baptiste
  • Litvinchuk, Alexander P.
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
  • Dimitrievska, Mirjana|||0000-0002-9439-1019
Predictive synthesis-structure-property relationships are at the core of materials design for novel applications. In this regard, correlations between the compositional stoichiometry variations and functional properties are essential for enhancing the performance of devices based on these materials. In this work, we investigate the effect of stoichiometry variations and defects on the structural and optoelectronic properties of monocrystalline zinc phosphide (ZnP), a promising compound for photovoltaic applications. We use experimental methods, such as electron and X-ray diffraction and Raman spectroscopy, along with density functional theory calculations, to showcase the favorable creation of P interstitial defects over Zn vacancies in P-rich and Zn-poor compositional regions. Photoluminescence and absorption measurements show that these defects create additional energy levels at about 180 meV above the valence band. Furthermore, they lead to the narrowing of the bandgap, due to the creation of band tails in the region of around 10-20 meV above the valence and below the conduction band. The ability of zinc phosphide to form off-stoichiometric compounds provides a new promising opportunity for tunable functionality that benefits applications. In that regard, this study is crucial for the further development of zinc phosphide and its application in optoelectronic and photovoltaic devices, and should pave the way for defect engineering in this kind of material.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Molecular engineering to introduce carbonyl between nickel salophen active sites to enhance electrochemical CO2 reduction to methanol

  • Liang, Zhifu
  • Wang, Jianghao
  • Tang, PengYi|||0000-0002-2306-095X
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Liu, Lijia
  • Shakouri, Mohsen
  • Wang, Xiang
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhao, Shuangliang
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Wu, Hao Bin
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The electrochemical reduction of CO to methanol is a potentially cost-effective strategy to reduce the concentration of this greenhouse gas while at the same time producing a value-added chemical. Herein, we detail a highly efficient 2D nickel organic framework containing a large density of highly dispersed salophen NiNO active sites toward electrochemical CORR to methanol. By tuning the ligand environment of the salophen NiNO, the electrocatalytic activity of the material toward CO reduction can be significantly improved. We prove that by introducing a carbonyl group at the ligand environment of the Ni active sites, the electrochemical CO reduction activity is highly promoted and its product selectivity reaches a Faradaic efficiency of 27% toward the production of methanol at - 0.9 V vs RHE. The salophen-based π-d conjugated metal-organic framework presented here thus provides the best performance toward CO reduction to methanol among the previously developed nickel-based electrocatalysts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Surface functionalization of surfactant-free particles, a strategy to tailor the properties of nanocomposites for enhanced thermoelectric performance

  • Chang, Cheng|||0000-0002-9515-4277
  • Liu, Yu|||0000-0001-7313-6740
  • Lee, Seung Ho
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Koskela, Kristopher M.
  • Kleinhanns, Tobias
  • Costanzo, Tommaso
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Brutchey, Richard L.
  • Ibáñez, Maria|||0000-0001-5013-2843
The broad implementation of thermoelectricity requires high-performance and low-cost materials. One possibility is employing surfactant-free solution synthesis to produce nanopowders. We propose the strategy of functionalizing "naked" particles' surface by inorganic molecules to control the nanostructure and, consequently, thermoelectric performance. In particular, we use bismuth thiolates to functionalize surfactant-free SnTe particles' surfaces. Upon thermal processing, bismuth thiolates decomposition renders SnTe-BiS nanocomposites with synergistic functions: 1) carrier concentration optimization by Bi doping; 2) Seebeck coefficient enhancement and bipolar effect suppression by energy filtering; and 3) lattice thermal conductivity reduction by small grain domains, grain boundaries and nanostructuration. Overall, the SnTe-BiS nanocomposites exhibit peak z T up to 1.3 at 873 K and an average z T of ≈0.6 at 300-873 K, which is among the highest reported for solution-processed SnTe.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A novel π-d conjugated cobalt tetraaza[14]annulene based atomically dispersed electrocatalyst for efficient CO2 reduction

  • Liang, Zhifu
  • Zhang, Ting|||0000-0002-0317-9662
  • Cao, Pengfei
  • Yoshida, Takefumi
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Wang, Xiang
  • Zuo, Yong|||0000-0003-1564-467X
  • Tang, PengYi|||0000-0002-2306-095X
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Yamashita, Masahiro
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Tetraaza[14]annulenes (TAA) are synthetic macrocycles which are analogue to porphyrins. However, there are almost no reports about the synthesis of polymers based on TAA and neither on their use as electrocatalysts. The study of new catalysts to promote an efficient electrochemical conversion of carbon dioxide to valuable chemicals is a promising approach to relieve the pressure of carbon emissions and realize the carbon cycle. Herein, we first report the synthesis of a novel tetraaza[14]annulene (TAA) based organic polymeric metal complex (PMC) by a non-template method. This PMC is used as ligand to construct a π-d conjugated cobalt coordination polymer (Poly-TAA-Co) with CoN structure which is supported on multi-wall carbon nanotubes (CNTs) to work as an atomically dispersed efficient electrocatalyst for the CO reduction reaction (CORR). The resulting catalyst (Poly-TAA-Co-CNT) exhibits excellent performance, with a 90% CO faradaic efficiency, a low overpotential (390 mV) and good stability in 0.5 M KHCO aqueous solution. Density functional theory calculations confirmed that the cobalt tetra[14]annulene is an excellent active site for electrocatalytic CORR. This work not only inspires the design of novel TAA based macromolecules, but also paves the way to the development and application of new molecular-based catalysts for electrocatalytic CORR.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A yolk-albumen-shell structure of mixed Ni-Co oxide with an ultrathin carbon shell for high-sensitivity glucose sensors

  • Zhang, Xuan
  • Zhang, Yawei
  • Guo, Wei|||0000-0002-4322-3699
  • Wan, Kai|||0000-0003-4689-310X
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhao, Yong-Qing|||0000-0003-1287-8673
  • Xu, Cai-Ling|||0000-0001-9360-3668
  • Xu, Maowen|||0000-0001-9320-5731
  • Fransaer, Jan|||0000-0002-0232-0687
Non-enzymatic glucose sensors based on different Co-Ni-C composite materials were developed by pyrolysis of bimetallic or single metal based metal-organic frameworks (MOFs). The structure and composition of the resulting materials were explored by XRD, nitrogen adsorption/desorption isotherms, SEM, HRTEM and STEM-EELS. The electrochemical performance of the bimetallic MOF derived novel yolk-albumen-shell structure of Ni-Co@C (YASNiCo@C) stands out from these materials. The YASNiCo@C electrode exhibited a sensitivity of 1964 μA cm-2 mM-1 with the detection limit of 0.75 μM, a linear range from 5 μM to 1000 μM and good stability for the detection of glucose. These promising electrochemical performances prove that YASNiCo@C is a promising material for glucose sensors. Moreover, the strategy outlined in this work for the design of MOF based nanomaterials can also be used beyond glucose sensors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Molecular engineering to tune the ligand environment of atomically dispersed nickel for efficient alcohol electrochemical oxidation

  • Liang, Zhifu
  • Jiang, Daochuan
  • Wang, Xiang
  • Shakouri, Mohsen
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Zhongjun
  • Tang, PengYi|||0000-0002-2306-095X
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Lijia
  • Yuan, Yupeng
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Atomically dispersed metals maximize the number of catalytic sites and enhance their activity. However, their challenging synthesis and characterization strongly complicates their optimization. Here, the aim is to demonstrate that tuning the electronic environment of atomically dispersed metal catalysts through the modification of their edge coordination is an effective strategy to maximize their performance. This article focuses on optimizing nickel-based electrocatalysts toward alcohol electrooxidation in alkaline solution. A new organic framework with atomically dispersed nickel is first developed. The coordination environment of nickel within this framework is modified through the addition of carbonyl (CO) groups. The authors then demonstrate that such nickel-based organic frameworks, combined with carbon nanotubes, exhibit outstanding catalytic activity and durability toward the oxidation of methanol (CHOH), ethanol (CHCHOH), and benzyl alcohol (CHCHOH); the smaller molecule exhibits higher catalytic performance. These outstanding electrocatalytic activities for alcohol electrooxidation are attributed to the presence of the carbonyl group in the ligand chemical environment, which enhances the adsorption for alcohol, as revealed by density functional theory calculations. The work not only introduces a new atomically dispersed Ni-based catalyst, but also demonstrates a new strategy for designing and engineering high-performance catalysts through the tuning of their chemical environment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhancement of proximity-induced superconductivity in a planar Ge hole gas

  • Aggarwal, Kushagra
  • Hofmann, Andrea
  • Jirovec, D.|||0000-0002-7197-4801
  • Prieto, Ivan
  • Sammak, Amir
  • Botifoll, Marc|||0000-0002-4876-6393
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Veldhorst, Menno|||0000-0001-9730-3523
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Scappucci, Giordano|||0000-0003-2512-0079
  • Danon, Jeroen
  • Katsaros, Georgios|||0000-0001-8342-202X
Hole gases in planar germanium can have high mobilities in combination with strong spin-orbit interaction and electrically tunable g factors, and are therefore emerging as a promising platform for creating hybrid superconductor-semiconductor devices. A key challenge towards hybrid Ge-based quantum technologies is the design of high-quality interfaces and superconducting contacts that are robust against magnetic fields. In this work, by combining the assets of aluminum, which provides good contact to the Ge, and niobium, which has a significant superconducting gap, we demonstrate highly transparent low-disordered JoFETs with relatively large ICRN products that are capable of withstanding high magnetic fields. We furthermore demonstrate the ability of phase-biasing individual JoFETs, opening up an avenue to explore topological superconductivity in planar Ge. The persistence of superconductivity in the reported hybrid devices beyond 1.8 T paves the way towards integrating spin qubits and proximity-induced superconductivity on the same chip.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effects of solar irradiation on thermally driven CO2 methanation using Ni/CeO2-based catalyst

  • Golovanova, Viktoria|||0000-0002-4008-0733
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Golovanov, Viacheslav
  • Rantala Tapio, T.
  • Andreu, Teresa|||0000-0002-2804-4545
  • Morante, Joan Ramon|||0000-0002-4981-4633
Utilization of the renewable energy sources is one of the main challenges in the state-of-the-art technologies for CO recycling. Here we have taken advantage of the solar light harvesting in the thermocatalytic approach to carbon dioxide methanation. The large-surface-area Ni/CeO catalyst produced by a scalable low-cost method was characterized and tested in the dark and under solar light irradiation conditions. Light-assisted CO conversion experiments as well as in-situ DRIFT spectrometry, performed at different illumination intensities, have revealed a dual effect of the incident photons on the catalytic properties of the two-component Ni/CeO catalyst. On the one hand, absorbed photons induce a localized surface plasmon resonance in the Ni nanoparticles followed by dissipation of the heat to the oxide matrix. On the other hand, the illumination activates the photocatalytic properties of the CeO support, which leads to an increase in the concentration of the intermediates being precursor for methane production. Analysis of the methane production at different temperatures and illumination conditions has shown that the methanation reaction in our case is controlled by a photothermally-activated process. The used approach has allowed us to increase the reaction rate up to 2.4 times and consequently to decrease the power consumption by 20 % under solar illumination, thus replacing the conventional thermal activation of the reaction with a green energy source.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Room temperature aqueous-based synthesis of copper-doped lead sulfide nanoparticles for thermoelectric application

  • Li, Mengyao|||0000-0002-9082-7938
  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Chang, Cheng|||0000-0002-9515-4277
  • Zhang, Ting|||0000-0002-0317-9662
  • Yang, Dawei|||0000-0002-3842-8286
  • Xiao, Ke
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
A versatile, scalable, room temperature and surfactant-free route for the synthesis of metal chalcogenide nanoparticles in aqueous solution is detailed here for the production of PbS and Cu-doped PbS nanoparticles. Subsequently, nanoparticles are annealed in a reducing atmosphere to remove surface oxide, and consolidated into dense polycrystalline materials by means of spark plasma sintering. By characterizing the transport properties of the sintered material, we observe the annealing step and the incorporation of Cu to play a key role in promoting the thermoelectric performance of PbS. The presence of Cu allows improving the electrical conductivity by increasing the charge carrier concentration and simultaneously maintaining a large charge carrier mobility, which overall translates into record power factors at ambient temperature, 2.3 mWmK. Simultaneously, the lattice thermal conductivity decreases with the introduction of Cu, leading to a record high ZT = 0.37 at room temperature and ZT = 1.22 at 773 K. Besides, a record average ZT = 0.76 is demonstrated in the temperature range 320-773 K for n-type Pb0.955Cu0.045S.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Pd2Ga nanorods as highly active bifunctional catalysts for electrosynthesis of acetic acid coupled with hydrogen production

  • Wang, Qiuxia
  • Liu, Junfeng|||0000-0003-3164-6472
  • Li, Tong
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Yan, Suxia
  • Wang, Yong
  • Li, Huaming
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The production of hydrogen from water splitting is hampered by the sluggish oxygen evolution reaction (OER). To overcome the OER limitation, herein we propose the electrosynthesis of value-added acetic acid from ethanol as the anodic reaction using high activity catalyts. For this strategy to be cost-effective, we develop a bifunctional catalyst based on PdGa nanorods. Such PdGa/C-based catalyst presents outstanding activity, selectivity and also stability for the electrocatalytic ethanol-to-acetic acid conversion with a current density above 164 mA cm and a mass activity of 1.97 A mg . Besides, its activity for hydrogen production is comparable to that of commercial Pt/C catalysts. Using PdGa/C as a bifunctional catalyst for both water reduction at the cathode and ethanol oxidation at the anode, these two coupled reactions are demonstrated to be an energy-efficient approach for the simultaneous production of high purity acetic acid and hydrogen. The assembled electrolyzer requires a small voltage input of 0.62 V to reach a current density of 10 mA cm, much lower than that of cells based on commercial Pt/C or Pd/C catalyst. Density functional theory calculations reveal that the high performance of the coupled system relies on a combination of an electronic and bifunctional effect of Ga, reducing the hydrogen-binding energy on the Pd site and at the same time actively participating in the reaction by providing OH binding sites and reducing the energy barrier of the ethanol oxidation rate-determining step.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrochemical reforming of ethanol with acetate Co-Production on nickel cobalt selenide nanoparticles

  • Li, Junshan|||0000-0002-1482-1972
  • Wang, Xiang
  • Xing, Congcong|||0000-0001-7674-6720
  • Li, Luming
  • Mu, Shijia
  • Han, Xu|||0000-0001-8319-8830
  • He, Ren|||0000-0003-3712-5539
  • Liang, Zhifu
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Yi, Yunan
  • Wu, Qianbao|||0000-0003-3236-8582
  • Pan, Huiyan
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cui, Chunhua|||0000-0002-2774-1576
  • Zhang, Yu|||0000-0002-0332-0013
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The energy efficiency of water electrolysis is limited by the sluggish reaction kinetics of the anodic oxygen evolution reaction (OER). To overcome this limitation, OER can be replaced by a less demanding oxidation reaction, which in the ideal scenario could be even used to generate additional valuable chemicals. Herein, we focus on the electrochemical reforming of ethanol in alkaline media to generate hydrogen at a Pt cathode and acetate as a co-product at a NiCoSe anode. We first detail the solution synthesis of a series of NiCoSe electrocatalysts. By adjusting the Ni/Co ratio, the electrocatalytic activity and selectivity for the production of acetate from ethanol are optimized. Best performances are obtained at low substitutions of Ni by Co in the cubic NiSe phase. Density function theory reveals that the Co substitution can effectively enhance the ethanol adsorption and decrease the energy barrier for its first step dehydrogenation during its conversion to acetate. However, we experimentally observe that too large amounts of Co decrease the ethanol-to-acetate Faradaic efficiency from values above 90% to just 50 %. At the optimized composition, the NiCoSe electrode delivers a stable chronoamperometry current density of up to 45 mA cm, corresponding to 1.2 A g, in a 1 M KOH + 1 M ethanol solution, with a high ethanol-to-acetate Faradaic efficiency of 82.2% at a relatively low potential, 1.50 V vs. RHE, and with an acetate production rate of 0.34 mmol cm-2 h-1.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Critical role of phosphorus in hollow structures cobalt-based phosphides as bifunctional catalysts for water splitting, High-performance bifunctional hollow structures cobalt-based phosphides catalysts for water splitting

  • Zhang, Wei
  • Han, Ning
  • Luo, Jiangshui
  • Han, Xu|||0000-0001-8319-8830
  • Feng, Shihui
  • Guo, Wei|||0000-0002-4322-3699
  • Xie, Sijie
  • Zhou, Zhenyu
  • Subramanian, Palaniappan|||0000-0003-1000-6994
  • Wan, Kai|||0000-0003-4689-310X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhang, Chi|||0000-0001-6009-5273
  • Liu, Shaomin
  • Xu, Maowen|||0000-0001-9320-5731
  • Zhang, Xuan
  • Fransaer, Jan|||0000-0002-0232-0687
Cobalt phosphides electrocatalysts have great potential for water splitting, but the unclear active sides hinder the further development of cobalt phosphides. Wherein, three different cobalt phosphides with the same hollow structure morphology (CoP-HS, CoP-HS, CoP-HS) based on the same sacrificial template of ZIF-67 are prepared. Surprisingly, these cobalt phosphides exhibit similar OER performances but quite different HER performances. The identical OER performance of these CoP-HS in alkaline solution is attributed to the similar surface reconstruction to CoOOH. CoP-HS exhibits the best catalytic activity for HER among these CoP-HS in both acidic and alkaline media, originating from the adjusted electronic density of phosphorus to affect absorption-desorption process on H. Moreover, the calculated ΔG based on P-sites of CoP-HS follows a quite similar trend with the normalized overpotential and Tafel slope, indicating the important role of P-sites for the HER process. Moreover, CoP-HS displays good performance (cell voltage of 1.67 V at a current density of 50 mA cm) and high stability in 1 M KOH. For the first time, this work detailly presents the critical role of phosphorus in cobalt-based phosphides for water splitting, which provides the guidance for future investigations on transition metal phosphides from material design to mechanism understanding.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Machine learning in electron microscopy for advanced nanocharacterization, current developments, available tools and future outlook

  • Botifoll, Marc|||0000-0002-4876-6393
  • Pinto-Huguet, Ivan
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
In the last few years, electron microscopy has experienced a new methodological paradigm aimed to fix the bottlenecks and overcome the challenges of its analytical workflow. Machine learning and artificial intelligence are answering this call providing powerful resources towards automation, exploration, and development. In this review, we evaluate the state-of-the-art of machine learning applied to electron microscopy (and obliquely, to materials and nano-sciences). We start from the traditional imaging techniques to reach the newest higher-dimensionality ones, also covering the recent advances in spectroscopy and tomography. Additionally, the present review provides a practical guide for microscopists, and in general for material scientists, but not necessarily advanced machine learning practitioners, to straightforwardly apply the offered set of tools to their own research. To conclude, we explore the state-of-the-art of other disciplines with a broader experience in applying artificial intelligence methods to their research (e.g., high-energy physics, astronomy, Earth sciences, and even robotics, videogames, or marketing and finances), in order to narrow down the incoming future of electron microscopy, its challenges and outlook.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Coordination polymer to atomically thin, holey, metal-oxide nanosheets for tuning band alignment

  • Mofarah, Sajjad S.|||0000-0002-4835-767X
  • Adabifiroozjaei, Esmaeil|||0000-0002-5095-2419
  • Pardehkhorram, Raheleh|||0000-0002-1412-2151
  • Assadi, Hussein|||0000-0002-1559-3211
  • Hinterstein, Manuel
  • Yao, Yin|||0000-0001-7487-4294
  • Liu, Xinhong
  • Ghasemian, Mohammad B.
  • Kalantar-Zadeh, Kourosh
  • Mehmood, Rashid
  • Cazorla, Claudio|||0000-0002-6501-4513
  • Shahmiri, Reza
  • Bahmanrokh, Ghazaleh|||0000-0003-0054-772X
  • Bhattacharyya, Saroj
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Lim, Sean
  • Xu, Yuwen
  • Arandiyan, Hamidreza
  • Scott, Jason
  • Koshy, Pramod
  • Sorrell, Charles C.
Holey 2D metal oxides have shown great promise as functional materials for energy storage and catalysts. Despite impressive performance, their processing is challenged by the requirement of templates plus capping agents or high temperatures; these materials also exhibit excessive thicknesses and low yields. The present work reports a metal-based coordination polymer (MCP) strategy to synthesize polycrystalline, holey, metal oxide (MO) nanosheets with thicknesses as low as two-unit cells. The process involves rapid exfoliation of bulk-layered, MCPs (Ce-, Ti-, Zr-based) into atomically thin MCPs at room temperature, followed by transformation into holey 2D MOs upon the removal of organic linkers in aqueous solution. Further, this work represents an extra step for decorating the holey nanosheets using precursors of transition metals to engineer their band alignments, establishing a route to optimize their photocatalysis. The work introduces a simple, high-yield, room-temperature, and template-free approach to synthesize ultrathin holey nanosheets with high-level functionalities.