Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 54
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electron bottleneck in the charge/discharge Mechanism of Lithium Titanates for Batteries

  • Ventosa, Edgar
  • Skoumal, Marcel
  • Vazquez, Francisco Javier
  • Flox, Cristina
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
The semi-solid flow battery (SSFB) is a promising storage energy technology featured by employing semi-solid fluid electrodes containing conductive additive and active Li-ion battery materials. The state of art anode material for SSFB is LiTiO (LTO). This work shows that LTO improves drastically the performance in fluid electrode via hydrogen annealing manifesting the importance of the electrical conductivity of the active material in SSFBs. On the other hand, the properties of fluid electrodes allow the contributions of ionic and electrical resistance to be separated in operando. The asymmetric overpotential observed in LiTiO and TiO is proposed to originate from the so-called electron bottleneck mechanism based on the transformation from electrically insulator to conductor upon (de-)lithiation, or vice versa, which should be considered when modelling, evaluating or designing advanced materials based on LiTiO, TiO or others with insulating-conducting behavior materials.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unveiling the Nucleation and Coarsening Mechanisms of Solution-Derived Self-Assembled Epitaxial Ce0.9Gd0.1O2-y Nanostructures

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hühne, Ruben
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Self-Assembling approaches based on chemical solution deposition (CSD) are ideal methods for the cost-effective production of epitaxial nanostructures with high throughput. Therefore, an in-depth investigation of the nucleation and coarsening processes involved in the self-Assembly of nanostructures is mandatory to achieve a good control over nanostructure shape, dimensions, and orientation. Heteroepitaxial CeGdO (CGO) is an ideal model system to unveil the underlying nanostructure development mechanisms in addition to their promising properties for catalysis, gas sensors, and ionic conductivity. Rapid thermal annealing furnaces have been used to study separately the thermodynamic and kinetic nucleation and coarsening mechanisms of self-Assembled CGO isotropic and anisotropic nanostructures based on strain-engineering and surface energies control. Different CGO nanoislands are obtained: isotropic (001)CGO nanodots are grown on (001)-oriented YO:ZrO(YSZ) and LaAlO (Lao) substrates, whereas (011)Lao substrates promote the growth of elongated (011)CGO nanowires. HRTEM and RHEED analyses are used to study the early stages of nucleation, as well as the shape and interfacial structure of CGO nanostructures. A systematic study with the heating ramp, annealing temperature and time, and strain in combination with thermally activated theoretical models provides information on the nucleation behavior, nucleation barriers, and atomic diffusion coefficients along in-plane and out-of-plane island orientations. Highly anisotropic atomic diffusion constants have been shown to be at the origin of the high aspect ratios of some of the nanostructures. Overall, our study provides a general method for the evaluation of nucleation and coarsening of multiple CSD-derived oxide nanostructures and understanding the shape development by combining thermodynamic and kinetic approaches.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Solution-based synthesis and processing of Sn- and Bi-doped Cu₃SbSe₄ nanocrystals, nanomaterials and ring-shaped thermoelectric generators

  • Liu, Yu|||0000-0001-7313-6740
  • Ortega, Silvia|||0000-0002-3812-5146
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Xi, Lili
  • De Roo, Jonathan
  • López Peña, Antonio M.|||0000-0002-6979-5783
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Cabezas, Ignasi
  • De La Mata, Maria|||0000-0002-1581-4838
  • Luo, Zhishan|||0000-0002-0801-9238
  • Dun, Chaochao
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Zhang, Wenqing
  • Martins, José
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Noriega, German
  • Song, Ji-Ming
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Copper-based chalcogenides that comprise abundant, low-cost, and environmental friendly elements are excellent materials for a number of energy conversion applications, including photovoltaics, photocatalysis, and thermoelectrics (TE). In such applications, the use of solution-processed nanocrystals (NCs) to produce thin films or bulk nanomaterials has associated several potential advantages, such as high material yield and throughput, and composition control with unmatched spatial resolution and cost. Here we report on the production of Cu₃SbSe₄ (CASe) NCs with tuned amounts of Sn and Bi dopants. After proper ligand removal, as monitored by nuclear magnetic resonance and infrared spectroscopy, these NCs were used to produce dense CASe bulk nanomaterials for solid state TE energy conversion. By adjusting the amount of extrinsic dopants, dimensionless TE figures of merit (ZT) up to 1.26 at 673 K were reached. Such high ZT values are related to an optimized carrier concentration by Sn doping, a minimized lattice thermal conductivity due to efficient phonon scattering at point defects and grain boundaries, and to an increase of the Seebeck coefficient obtained by a modification of the electronic band structure with Bi doping. Nanomaterials were further employed to fabricate ring-shaped TE generators to be coupled to hot pipes, which provided 20 mV and 1 mW per TE element when exposed to a 160 °C temperature gradient. The simple design and good thermal contact associated with the ring geometry and the potential low cost of the material solution processing may allow the fabrication of TE generators with short payback times.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A prototype reactor for highly selective solar-driven CO2 reduction to synthesis gas using nanosized earth-abundant catalysts and silicon photovoltaics

  • Urbain, Félix|||0000-0001-5423-6818
  • Tang, PengYi|||0000-0002-2306-095X
  • Carretero González, Nina Magali
  • Andreu, Teresa|||0000-0002-2804-4545
  • Gerling, Luis G.
  • Voz Sánchez, Cristóbal
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
The conversion of carbon dioxide (CO) into value-added chemicals and fuels, preferably using renewable energy and earth-abundant materials, is considered a key priority for future energy research. In this work, a bias-free reactor device for the solar-driven conversion of CO to synthesis gas (syngas) has been developed. The integrated fluidic device consists of a cathode made of copper foam coated with low-cost nanosized zinc flakes as catalyst to perform the CO reduction reaction (CORR) to syngas, an adapted silicon heterojunction solar cell structure as photoanode with nickel foam as catalyst to facilitate the oxygen evolution reaction (OER), and a bipolar membrane separating the respective catholyte and anolyte compartments. The membrane allows for the operation of the catholyte and anolyte at different pH values. Stable and tunable hydrogen-to-carbon monoxide (H:CO) ratios between 5 and 0.5 along with high CO Faradaic efficiencies of up to 85% and CO current densities of 39.4 mA cm have been demonstrated. Under photoelectrolysis conditions, the photovoltage of the photoanode was varied between 0.6 V and 2.4 V by connecting up to four heterojunction solar cells in series, and thus reducing the overall cell voltage solely by solar energy utilization. Bias-free operation of the integrated device has been achieved under ambient conditions with active areas for CORR and OER, respectively, of 10 cm. An operation current density of 5.0 mA cm was measured under 100 mW cm illumination of the complete device, which corresponds to a solar-to-syngas conversion efficiency of 4.3%.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High-performance thermoelectric nanocomposites from nanocrystal building blocks

  • Ibáñez, Maria|||0000-0001-5013-2843
  • Luo, Zhishan|||0000-0002-0801-9238
  • Genç, Aziz|||0000-0002-2888-2549
  • Piveteau, Laura
  • Ortega, Silvia|||0000-0002-3812-5146
  • Cadavid, Doris|||0000-0002-1376-6078
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Liu, Yu|||0000-0001-7313-6740
  • Nachtegaal, Maarten
  • Zebarjadi, Mona
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The efficient conversion between thermal and electrical energy by means of durable, silent and scalable solid-state thermoelectric devices has been a long standing goal. While nanocrystalline materials have already led to substantially higher thermoelectric efficiencies, further improvements are expected to arise from precise chemical engineering of nanoscale building blocks and interfaces. Here we present a simple and versatile bottom-up strategy based on the assembly of colloidal nanocrystals to produce consolidated yet nanostructured thermoelectric materials. In the case study on the PbS-Ag system, Ag nanodomains not only contribute to block phonon propagation, but also provide electrons to the PbS host semiconductor and reduce the PbS intergrain energy barriers for charge transport. Thus, PbS-Ag nanocomposites exhibit reduced thermal conductivities and higher charge carrier concentrations and mobilities than PbS nanomaterial. Such improvements of the material transport properties provide thermoelectric figures of merit up to 1.7 at 850 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Low-Temperature Growth of Axial Si/Ge Nanowire Heterostructures Enabled by Trisilane

  • Hui, Ho Yee
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Filler, Michael A.
Axial Si/Ge heterostructure nanowires, despite their promise in applications ranging from electronics to thermal transport, remain notoriously difficult to synthesize. Here, we grow axial Si/Ge heterostructures at low temperatures using a Au catalyst with a combination of trisilane and digermane. This approach yields, as determined with detailed electron microscopy characterization, arrays of epitaxial Si/Ge nanowires with excellent morphologies and purely axial composition profiles. Our data indicate that heterostructure formation can occur via the vapor-liquid-solid or vapor-solid-solid mechanism. These findings highlight the importance of precursor chemistry in semiconductor nanowire synthesis and open the door to Si/Ge nanowires with programmable quantum domains.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Charge transfer characterization of ALD-Grown TiO₂ protective layers in silicon photocathodes

  • Ros, Carles|||0000-0002-9148-2767
  • Andreu, Teresa|||0000-0002-2804-4545
  • Hernández-Alonso, María Dolores
  • Penelas-Pérez, Germán
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
A critical parameter for the implementation of standard high-efficiency photovoltaic absorber materials for photoelectrochemical (PEC) water splitting is its proper protection from chemical corrosion while remaining transparent and highly conductive. Atomic layer deposited (ALD) TiO₂ layers fulfill material requirements while conformally protecting the underlying photoabsorber. Nanoscale conductivity of ALD TiO₂ protective layers on silicon based photocathodes has been analyzed, proving that the conduction path is through the columnar crystalline structure of TiO₂. Deposition temperature has been explored from 100 to 300 ºC, and a temperature threshold is found to be mandatory for an efficient charge transfer, as a consequence of layer crystallization between 100 and 200 ºC. Completely crystallized TiO₂ is demonstrated to be mandatory for long term stability, as seen in the 300 h continuous operation test.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Co-Cu Nanoparticles, Synthesis by Galvanic Replacement and Phase Rearrangement during Catalytic Activation

  • Nafria, Raquel|||0000-0002-3254-1616
  • Genç, Aziz|||0000-0002-2888-2549
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ramírez de la Piscina, Pilar
  • Homs, N.
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The control of the phase distribution in multicomponent nanomaterials is critical to optimize their catalytic performance. In this direction, while impressive advances have been achieved in the past decade in the synthesis of multicomponent nanoparticles and nanocomposites, element rearrangement during catalyst activation has been frequently overseen. Here, we present a facile galvanic replacement-based procedure to synthesize Co@Cu nanoparticles with narrow size and composition distributions. We further characterize their phase arrangement before and after catalytic activation. When oxidized at 350 °C in air to remove organics, Co@Cu core-shell nanostructures oxidize to polycrystalline CuO-CoO nanoparticles with randomly distributed CuO and CoO crystallites. During a posterior reduction treatment in H atmosphere, Cu precipitates in a metallic core and Co migrates to the nanoparticle surface to form Cu@Co core-shell nanostructures. The catalytic behavior of such Cu@Co nanoparticles supported on mesoporous silica was further analyzed toward CO hydrogenation in real working conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cobalt boride modified with N-doped carbon nanotubes as a high-performance bifunctional oxygen electrocatalyst

  • Elumeeva, Karina
  • Masa, Jistis
  • Medina, Danea
  • Ventosa, Edgar
  • Seisel, Sabine
  • Kayran, Yasin Ugur
  • Genç, Aziz|||0000-0002-2888-2549
  • Bobrowski, Tim
  • Weide, Philippe
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Muhler, Martin
  • Schuhmann, Wolfgang|||0000-0003-2916-5223
The development of reversible oxygen electrodes, able to drive both the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR), is still a great challenge. We describe a very efficient and stable bifunctional electrocatalytic system for reversible oxygen electrodes obtained by direct CVD growth of nitrogen-doped carbon nanotubes (NCNTs) on the surface of cobalt boride (CoB) nanoparticles. A detailed investigation of the crystalline structure and elemental distribution of CoB before and after NCNT growth reveals that the NCNTs grow on small CoB nanoparticles formed in the CVD process. The resultant CoB/NCNT system exhibited outstanding activity in catalyzing both the OER and the ORR in 0.1 M KOH with an overvoltage difference of only 0.73 V between the ORR at -1 mA cm⁻² and the OER at +10 mA cm⁻². The proposed CoB/NCNT catalyst showed stable performance during 50 h of OER stability assessment in 0.1 M KOH. Moreover, CoB/NCNT spray-coated on a gas diffusion layer as an air-breathing electrode proved its high durability during 170 galvanostatic charge-discharge (OER/ORR) test cycles (around 30 h) at ±10 mA cm⁻² in 6 M KOH, making it an excellent bifunctional catalyst for potential Zn-air battery application.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrathin High Surface Area Nickel Boride (NixB) Nanosheets as Highly Efficient Electrocatalyst for Oxygen Evolution, Nickel boride (NixB) as a highly efficient catalyst for oxygen evolution

  • Masa, Justus|||0000-0002-8555-5157
  • Sinev, Ilya
  • Mistry, Hemma
  • Ventosa, Edgar
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Muhler, Martin
  • Roldan Cuenya, Beatriz
  • Schuhmann, Wolfgang|||0000-0003-2916-5223
The overriding obstacle to mass production of hydrogen from water as the premium fuel for powering our planet is the frustratingly slow kinetics of the oxygen evolution reaction (OER). Additionally, inadequate understanding of the key barriers of the OER is a hindrance to insightful design of advanced OER catalysts. This study presents ultrathin amorphous high-surface area nickel boride (NiB) nanosheets as a low-cost, very efficient and stable catalyst for the OER for electrochemical water splitting. The catalyst affords 10 mA cm at 0.38 V overpotential during OER in 1.0 m KOH, reducing to only 0.28 V at 20 mA cm when supported on nickel foam, which ranks it among the best reported nonprecious catalysts for oxygen evolution. Operando X-ray absorption fine-structure spectroscopy measurements reveal prevalence of NiOOH, as well as Ni-B under OER conditions, owing to a Ni-B core@nickel oxyhydroxide shell (Ni-B@NiOH) structure, and increase in disorder of the NiOH layer, thus revealing important insight into the transient states of the catalyst during oxygen evolution.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Surface-Guided Core-Shell ZnSe@ZnTe Nanowires as Radial p-n Heterojunctions with Photovoltaic Behavior

  • Oksenberg, Eitan|||0000-0001-9462-3986
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Popovitz-Biro, Ronit
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Joselevich, Ernesto|||0000-0002-9919-0734
The organization of nanowires on surfaces remains a major obstacle toward their large-scale integration into functional devices. Surface-material interactions have been used, with different materials and substrates, to guide horizontal nanowires during their growth into well-organized assemblies, but the only guided nanowire heterostructures reported so far are axial and not radial. Here, we demonstrate the guided growth of horizontal core-shell nanowires, specifically of ZnSe@ZnTe, with control over their crystal phase and crystallographic orientations. We exploit the directional control of the guided growth for the parallel production of multiple radial p-n heterojunctions and probe their optoelectronic properties. The devices exhibit a rectifying behavior with photovoltaic characteristics upon illumination. Guided nanowire heterostructures enable the bottom-up assembly of complex semiconductor structures with controlled electronic and optoelectronic properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synergistic effects in 3D honeycomb-like hematite nanoflakes/branched polypyrrole nanoleaves heterostructures as high-performance negative electrodes for asymmetric supercapacitors

  • Tang, PengYi|||0000-0002-2306-095X
  • Han, Li-Juan
  • Genç, Aziz|||0000-0002-2888-2549
  • He, Yong-Min
  • Zhang, Xuan
  • Zhang, Lin|||0000-0003-1998-0611
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Rational assembly of unique branched heterostructures is one of the facile techniques to improve the electrochemical figure of merit of materials. By taking advantages of hydrogen bubbles dynamic template, hydrothermal method and electrochemical polymerization, branched polypyrrole (PPy) nanoleaves decorated honeycomb-like hematite nanoflakes (core-branch FeO@PPy) are fabricated. X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy (TEM), high-resolution TEM, and scanning transmission electron microscopy in high angle annular dark field mode with electron energy loss spectroscopy were combined to elucidate the mechanisms underlying formation and morphogenesis evolution of core-branch FeO@PPy heterostructures. Benefiting from the stability of honeycomb-like hematite nanoflakes and the high conductivity of PPy nanoleaves, the resultant core-branch FeO@PPy exhibits an ultrahigh capacitance of 1167.8 F g at 1 A g in 0.5 M NaSO aqueous solution. Moreover, the assembled bi-metal oxides asymmetric supercapacitor (FeO@PPy//MnO) gives rise to a maximum energy density of 42.4 W h kg and a maximum power density of 19.14 kW kg with an excellent cycling performance of 97.1% retention after 3000 cycles at 3 A g. These performance features are superior than previous reported iron oxide/hydroxides based supercapacitors, offering an important guideline for future design of advanced next-generation supercapacitors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Polybenzoxazine-derived N-doped carbon as matrix for powder-based electrocatalysts

  • Barwe, Stephan
  • Andronescu, Corina
  • Masa, Justus|||0000-0002-8555-5157
  • Ventosa, Edgar
  • Klink, Stefan
  • Genç, Aziz|||0000-0002-2888-2549
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Schuhmann, Wolfgang|||0000-0003-2916-5223
In addition to catalytic activity, intrinsic stability, tight immobilization on a suitable electrode surface, and sufficient electronic conductivity are fundamental prerequisites for the long-term operation of particle- and especially powder-based electrocatalysts. We present a novel approach to concurrently address these challenges by using the unique properties of polybenzoxazine (pBO) polymers, namely near-zero shrinkage and high residual-char yield even after pyrolysis at high temperatures. Pyrolysis of a nanocubic prussian blue analogue precursor (Km Mnx [Co(CN)₆]y⋅nH₂O) embedded in a bisphenol A and aniline-based pBO led to the formation of a N-doped carbon matrix modified with MnxCoyOz nanocubes. The obtained electrocatalyst exhibits high efficiency toward the oxygen evolution reaction (OER) and more importantly a stable performance for at least 65 h.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hollow metal nanostructures for enhanced plasmonics, synthesis, local plasmonic properties and applications

  • Genç, Aziz|||0000-0002-2888-2549
  • Patarroyo, Javier|||0000-0002-3703-666X
  • Sancho i Parramon, Jordi
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Metallic nanostructures have received great attention due to their ability to generate surface plasmon resonances, which are collective oscillations of conduction electrons of a material excited by an electromagnetic wave. Plasmonic metal nanostructures are able to localize and manipulate the light at the nanoscale and, therefore, are attractive building blocks for various emerging applications. In particular, hollow nanostructures are promising plasmonic materials as cavities are known to have better plasmonic properties than their solid counterparts thanks to the plasmon hybridization mechanism. The hybridization of the plasmons results in the enhancement of the plasmon fields along with more homogeneous distribution as well as the reduction of localized surface plasmon resonance (LSPR) quenching due to absorption. In this review, we summarize the efforts on the synthesis of hollow metal nanostructures with an emphasis on the galvanic replacement reaction. In the second part of this review, we discuss the advancements on the characterization of plasmonic properties of hollow nanostructures, covering the single nanoparticle experiments, nanoscale characterization via electron energy-loss spectroscopy and modeling and simulation studies. Examples of the applications, i.e. sensing, surface enhanced Raman spectroscopy, photothermal ablation therapy of cancer, drug delivery or catalysis among others, where hollow nanostructures perform better than their solid counterparts, are also evaluated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced photoelectrochemical water splitting of hematite multilayer nanowire photoanodes by tuning the surface state via bottom-up interfacial engineering

  • Tang, PengYi|||0000-0002-2306-095X
  • Xie, Haibing|||0000-0002-5070-2882
  • Ros, Carles|||0000-0002-9148-2767
  • Han, Lijuan
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • He, Yong-Min
  • Kramer, W.
  • Pérez-Rodríguez, Alejandro
  • Saucedo, Edgardo
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
  • Andreu, Teresa|||0000-0002-2804-4545
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The optimization of multiple interfaces in hematite (α-Fe₂O₃) based composites for photoelectrochemical water splitting to facilitate charge transport in the bulk is of paramount importance to obtain enhanced solar-to-fuel efficiency. Herein, we report the fabrication of ITO/Fe₂O₃/Fe₂TiO₅/FeNiOOH multi-layer nanowires and a series of systematic experiments designed to elucidate the mechanism underlying the interfacial coupling effect of the quaternary hematite composite. The hierarchical ITO/Fe₂O₃/Fe₂TiO₅/FeNiOOH nanowires display photocurrents that are more than an order of magnitude greater than those of pristine Fe₂O₃ nanowires (from 0.205 mAcm⁻² to 2.2 mAcm⁻² at 1.23 V vs. RHE and 1 Sun), and higher than those of most of the recently reported state-of-the-art hematite composites. Structural, compositional and electrochemical investigations disclose that the surface states (SS) are finely regulated via the atomic addition of an Fe₂TiO₅ layer and FeNiOOH nanodots, while the upgrading of back contact conductivity and charge donor densities originate from the epitaxial relationship and enhanced Sn doping contributed from the ITO underlayer. We attribute the superior water oxidation performance to the interfacial coupling effect of the ITO underlayer (Sn doping and back contact conductivity promoter), the atomic level Fe₂TiO₅ coating (Ti doping, surface state density and energy level modulation) and the FeNiOOH nanodot electrocatalyst (regulating surface state energy level). Our work suggests an effective pathway for rational designing of highly active and cost-effective integrated photoanodes for photoelectrochemical water splitting.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tuning the Plasmonic Response up, Hollow Cuboid Metal Nanostructures

  • Genç, Aziz|||0000-0002-2888-2549
  • Patarroyo, Javier|||0000-0002-3703-666X
  • Sancho i Parramon, Jordi
  • Arenal, Raúl|||0000-0002-2071-9093
  • Duchamp, Martial
  • González, Edgar E.|||0000-0003-3103-3959
  • Henrard, Luc
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Puntes, Víctor|||0000-0001-8996-9499
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
We report the fine-tuning of the localized surface plasmon resonances (LSPRs) from ultraviolet to near-infrared by nanoengineering the metal nanoparticle morphologies from solid Ag nanocubes to hollow AuAg nanoboxes and AuAg nanoframes. Spatially resolved mapping of plasmon resonances by electron energy loss spectroscopy (EELS) revealed a homogeneous distribution of highly intense plasmon resonances around the hollow nanostructures and the interaction, that is, hybridization, of inner and outer plasmon fields for the nanoframe. Experimental findings are accurately correlated with the boundary element method (BEM) simulations demonstrating that the homogeneous distribution of the plasmon resonances is the key factor for their improved plasmonic properties. As a proof of concept for these enhanced plasmonic properties, we show the effective label free sensing of bovine serum albumin (BSA) of single-walled AuAg nanoboxes in comparison with solid Au nanoparticles, demonstrating their excellent performance for future biomedical applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrafast Epitaxial Growth Kinetics in Functional Oxide Thin Films Grown by Pulsed Laser Annealing of Chemical Solutions

  • Queraltó López, Albert
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Tristany, Mar
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
The crystallization process and physical properties of different functional oxide thin films (CeZrO, LaNiO, BaSrTiO, and LaSrMnO) on single crystal substrates (YO:ZrO, LaAlO, and SrTiO) are studied by pulsed laser annealing (PLA). A Nd:YAG laser source (λ = 266 nm, 10 Hz and τ ∼3 ns) is employed to crystallize chemical solution deposited (CSD) amorphous/nanocrystalline films under atmospheric conditions. We provide new insight on the influence of photochemical and photothermal interactions on the epitaxial crystallization kinetics of oxide thin films during the transformation from amorphous/polycrystalline material (i.e., atomic diffusion, epitaxial growth rates, and activation energies of nucleation and crystallization). The epitaxial growth is investigated by varying the laser fluence and the applied number of pulses. The morphology, structure, and epitaxial evolution of films are evaluated by means of atomic force and transmission electron microscopies and X-ray diffraction. Highly epitaxial oriented films of 20-40 nm in thickness are obtained by PLA. The crystallization kinetics of laser treatments is determined to be orders of magnitude faster than thermal treatments with similar activation energies (1.5-4.1 eV), mainly due to the large temperature gradients inducing modified atomic diffusion mechanisms derived mainly from photothermal interactions, as well as a minor contribution of photochemical effects. The fast heating rates achieved by PLA also contribute to the fast epitaxial growth due to reduced coarsening of polycrystalline material. The measurement of the physical properties (electrical resistivity and magnetism) of laser processed CSD films has revealed significantly good functionalities, close to those of thermally grown films, but with much shorter processing times.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Thermoelectric properties of semiconductor-metal composites produced by particle blending

  • Liu, Yu|||0000-0001-7313-6740
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Ortega, Silvia|||0000-0002-3812-5146
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the quest for more efficient thermoelectric material able to convert thermal to electrical energy and vice versa, composites that combine a semiconductor host having a large Seebeck coefficient with metal nanodomains that provide phonon scattering and free charge carriers are particularly appealing. Here, we present our experimental results on the thermal and electrical transport properties of PbS-metal composites produced by a versatile particle blending procedure, and where the metal work function allows injecting electrons to the intrinsic PbS host. We compare the thermoelectric performance of composites with microcrystalline or nanocrystalline structures. The electrical conductivity of the microcrystalline host can be increased several orders of magnitude with the metal inclusion, while relatively high Seebeck coefficient can be simultaneously conserved. On the other hand, in nanostructured materials, the host crystallites are not able to sustain a band bending at its interface with the metal, becoming flooded with electrons. This translates into even higher electrical conductivities than the microcrystalline material, but at the expense of lower Seebeck coefficient values.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mn₃O₄@CoMn₂O₄-CoₓOy nanoparticles, Partial cation exchange synthesis and electrocatalytic properties toward the oxygen reduction and evolution reactions

  • Luo, Zhishan|||0000-0002-0801-9238
  • Irtem, Erdem
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Nafria, Raquel|||0000-0002-3254-1616
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Genç, Aziz|||0000-0002-2888-2549
  • De La Mata, Maria|||0000-0002-1581-4838
  • Liu, Yu|||0000-0001-7313-6740
  • Cadavid, Doris|||0000-0002-1376-6078
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Andreu, Teresa|||0000-0002-2804-4545
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Mn₃O₄@CoMn₂O₄ nanoparticles (NPs) were produced at low temperature and ambient atmosphere using a one-pot two-step synthesis protocol involving the cation exchange of Mn by Co in preformed Mn₃O₄ NPs. Selecting the proper cobalt precursor, the nucleation of CoₓOy crystallites at the Mn₃O₄@CoMn₂O₄ surface could be simultaneously promoted to form Mn₃O₄@CoMn₂O₄-CoₓOy NPs. Such heterostructured NPs were investigated for oxygen reduction and evolution reactions (ORR, OER) in alkaline solution. Mn₃O₄@CoMn₂O₄-CoₓOy NPs with [Co]/[Mn] = 1 showed low overpotentials of 0.31 V at -3 mA·cm-2 and a small Tafel slope of 52 mV·dec-1 for ORR, and overpotentials of 0.31 V at 10 mA·cm-2 and a Tafel slope of 81 mV·dec-1 for OER, thus outperforming commercial Pt-, IrO2-based and previously reported transition metal oxides. This cation-exchange-based synthesis protocol opens up a new approach to design novel heterostructured NPs as efficient nonprecious metal bifunctional oxygen catalysts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Twin-induced InSb nanosails, a convenient high mobility quantum system

  • De La Mata, Maria|||0000-0002-1581-4838
  • Leturcq, Renaud
  • Plissard, Sébastien R.
  • Rolland, Chloé
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Caroff, Philippe
Ultra narrow bandgap III-V semiconductor nanomaterials provide a unique platform for realizing advanced nanoelectronics, thermoelectrics, infrared photodetection, and quantum transport physics. In this work we employ molecular beam epitaxy to synthesize novel nanosheet-like InSb nanostructures exhibiting superior electronic performance. Through careful morphological and crystallographic characterization we show how this unique geometry is the result of a single twinning event in an otherwise pure zinc blende structure. Four-terminal electrical measurements performed in both the Hall and van der Pauw configurations reveal a room temperature electron mobility greater than 12 000 cm²·V⁻¹·s⁻¹. Quantized conductance in a quantum point contact processed with a split-gate configuration is also demonstrated. We thus introduce InSb "nanosails" as a versatile and convenient platform for realizing new device and physics experiments with a strong interplay between electronic and spin degrees of freedom.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Demonstrating the steady performance of iron oxide composites over 2000 cycles at fast charge-rates for Li-ion batteries

  • Sun, Z.
  • Madej, E.
  • Genç, Aziz|||0000-0002-2888-2549
  • Muhler, Martin
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Schuhmann, Wolfgang|||0000-0003-2916-5223
  • Ventosa, Edgar
The feasibility of using iron oxides as negative electrode materials for safe high-power Li-ion batteries is demonstrated by the carbon-coated FeO/CNT composite synthesized by controlled pyrolysis of ferrocene, which delivered a specific capacity retention of 84% (445 mA h g) after 2000 cycles at 2000 mA g (4C).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

UV Photosensing Characteristics of Nanowire-Based GaN/AlN Superlattices

  • Lähnemann, Jonas
  • Den Hertog, Martien
  • Hille, Pascal
  • De La Mata, Maria|||0000-0002-1581-4838
  • Fournier, Thierry
  • Schörmann, Jörg
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Eickhoff, Martin
  • Monroy, Eva
We have characterized the photodetection capabilities of single GaN nanowires incorporating 20 periods of AlN/GaN:Ge axial heterostructures enveloped in an AlN shell. Transmission electron microscopy confirms the absence of an additional GaN shell around the heterostructures. In the absence of a surface conduction channel, the incorporation of the heterostructure leads to a decrease of the dark current and an increase of the photosensitivity. A significant dispersion in the magnitude of dark currents for different single nanowires is attributed to the coalescence of nanowires with displaced nanodisks, reducing the effective length of the heterostructure. A larger number of active nanodisks and AlN barriers in the current path results in lower dark current and higher photosensitivity and improves the sensitivity of the nanowire to variations in the illumination intensity (improved linearity). Additionally, we observe a persistence of the photocurrent, which is attributed to a change of the resistance of the overall structure, particularly the GaN stem and cap sections. As a consequence, the time response is rather independent of the dark current.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Scalable Heating-Up Synthesis of Monodisperse Cu2ZnSnS4 Nanocrystals

  • Shavel, Alexey|||0000-0002-3995-0391
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Luo, Zhishan|||0000-0002-0801-9238
  • De Roo, Jonathan
  • Carrete, Alex
  • Dimitrievska, Mirjana|||0000-0002-9439-1019
  • Genç, Aziz|||0000-0002-2888-2549
  • Meyns, Michaela|||0000-0003-2476-9001
  • Pérez-Rodríguez, Alejandro
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Monodisperse CuZnSnS (CZTS) nanocrystals (NCs), with quasi-spherical shape, were prepared by a facile, high-yield, scalable, and high-concentration heat-up procedure. The key parameters to minimize the NC size distribution were efficient mixing and heat transfer in the reaction mixture through intensive argon bubbling and improved control of the heating ramp stability. Optimized synthetic conditions allowed the production of several grams of highly monodisperse CZTS NCs per batch, with up to 5wt% concentration in a crude solution and a yield above 90%.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Polymer-enhanced stability of inorganic perovskite nanocrystals and their application in color conversion LEDs

  • Meyns, Michaela|||0000-0003-2476-9001
  • Perálvarez, Mariano
  • Heuer-Jungemann, Amelie
  • Hertog, Wim
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Nafria, Raquel|||0000-0002-3254-1616
  • Genç, Aziz|||0000-0002-2888-2549
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Carreras, Josep
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kanaras, Antonios G.
Cesium lead halide (CsPbX₃, X = Cl, Br, I) nanocrystals (NCs) offer exceptional optical properties for several potential applications but their implementation is hindered by a low chemical and structural stability and limited processability. In the present work, we developed a new method to efficiently coat CsPbX₃ NCs, which resulted in their increased chemical and optical stability as well as processability. The method is based on the incorporation of poly(maleic anhydride-alt-1-octadecene) (PMA) into the synthesis of the perovskite NCs. The presence of PMA in the ligand shell stabilizes the NCs by tightening the ligand binding, limiting in this way the NC surface interaction with the surrounding media. We further show that these NCs can be embedded in self-standing silicone/glass plates as down-conversion filters for the fabrication of monochromatic green and white light emitting diodes (LEDs) with narrow bandwidths and appealing color characteristics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The Ethylhexanoate route to metal oxide nanocrystals, synthesis of CoO nanooctahedra from Co¹¹2-Ethylhexanoate

  • Epifani, Mauro|||0000-0002-9242-6484
  • Tang, PengYi|||0000-0002-2306-095X
  • Genç, Aziz|||0000-0002-2888-2549
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Díaz, Raül
  • Wicker, Susanne
CoO nanocrystals were prepared by solvothermal processing of Co 2-ethylhexanoate in oleylamine at 250 °C. The obtained products, identified as CoO by X-ray diffraction, had an octahedral shape, as seen by transmission electron microscopy, reflecting the cubic symmetry of the CoO crystallographic phase. The materials were converted into the CO₃0₄ phase after heat treatment at 400 °C. The nanocrystal evolution was investigated by FTIR spectroscopy. It was concluded that weak oleylamine bonding to the nanocrystal surface during the synthesis step favored the exchange with 2-ethylhexanoato ligands, and that the interplay between the two ligands favored the kinetic control of the growth, resulting in the finally observed octahedral morphology. The CO₃0₄ phase obtained from the heat treatment at 400 °C was used to process chemoresistive sensors, which were able to detect ethanol under dry and humid conditions (0 and 50 % r.h. HO at 25 °C) at low temperatures (100 °C).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phonon engineering in isotopically disordered silicon nanowires

  • Mukherjee, Samik|||0000-0002-5279-1110
  • Givan, Uri
  • Senz, Stephan
  • Bergeron, A.
  • Francoeur, Sebastien|||0000-0002-6129-7026
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Sekiguchi, T.
  • Itoh, K. M.
  • Isheim, D.
  • Seidman, D. N.
  • Moutanabbir, Oussama|||0000-0002-0721-3696
The introduction of stable isotopes in the fabrication of semiconductor nanowires provides an additional degree of freedom to manipulate their basic properties, design an entirely new class of devices, and highlight subtle but important nanoscale and quantum phenomena. With this perspective, we report on phonon engineering in metal-catalyzed silicon nanowires with tailor-made isotopic compositions grown using isotopically enriched silane precursors ²⁸SiH, ²⁹SiH, and ³⁰SiH with purity better than 99.9%. More specifically, isotopically mixed nanowires ²⁸Si ³⁰Si with a composition close to the highest mass disorder (x ∼ 0.5) were investigated. The effect of mass disorder on the phonon behavior was elucidated and compared to that in isotopically pure Si nanowires having a similar reduced mass. We found that the disorder-induced enhancement in phonon scattering in isotopically mixed nanowires is unexpectedly much more significant than in bulk crystals of close isotopic compositions. This effect is explained by a nonuniform distribution of ²⁸Si and ³⁰Si isotopes in the grown isotopically mixed nanowires with local compositions ranging from x = ∼0.25 to 0.70. Moreover, we also observed that upon heating, phonons in ²⁸Si ³⁰Si nanowires behave remarkably differently from those in ²⁹Si nanowires suggesting a reduced thermal conductivity induced by mass disorder. Using Raman nanothermometry, we found that the thermal conductivity of isotopically mixed ²⁸Si Si nanowires is ∼30% lower than that of isotopically pure ²⁹Si nanowires in agreement with theoretical predictions. (Figure Presented).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Long-lived excitons in GaN/AlN nanowire heterostructures

  • Beeler, Mark
  • Lim, Caroline B.
  • Hille, Pascal
  • Bleuse, Joel
  • Schörmann, Jörg
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Eickhoff, Martin
  • Monroy, Eva
GaN/AlN nanowire heterostructures can display photoluminescence (PL) decay times on the order of microseconds that persist up to room temperature. Doping the GaN nanodisk insertions with Ge can reduce these PL decay times by two orders of magnitude. These phenomena are explained by the three-dimensional electric field distribution within the GaN nanodisks, which has an axial component in the range of a few MV/cm associated to the spontaneous and piezoelectric polarization, and a radial piezoelectric contribution associated to the shear components of the lattice strain. At low dopant concentrations, a large electron-hole separation in both the axial and radial directions is present. The relatively weak radial electric fields, which are about one order of magnitude smaller than the axial fields, are rapidly screened by doping. This bidirectional screening leads to a radial and axial centralization of the hole underneath the electron, and consequently, to large decreases in PL decay times, in addition to luminescence blue shifts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Position-controlled growth of GaN nanowires and nanotubes on diamond by molecular beam epitaxy

  • Schuster, Fabian
  • Hetzl, Martin
  • Weiszer, Saskia
  • Garrido, Jose|||0000-0001-5621-1067
  • De La Mata, Maria|||0000-0002-1581-4838
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Stutzmann, Martin|||0000-0002-0068-3505
In this work the position-controlled growth of GaN nanowires (NWs) on diamond by means of molecular beam epitaxy is investigated. In terms of growth, diamond can be seen as a model substrate, providing information of systematic relevance also for other substrates. Thin Ti masks are structured by electron beam lithography which allows the fabrication of perfectly homogeneous GaN NW arrays with different diameters and distances. While the wurtzite NWs are found to be Ga-polar, N-polar nucleation leads to the formation of tripod structures with a zinc-blende core which can be efficiently suppressed above a substrate temperature of 870 °C. A variation of the III/V flux ratio reveals that both axial and radial growth rates are N-limited despite the globally N-rich growth conditions, which is explained by the different diffusion behavior of Ga and N atoms. Furthermore, it is shown that the hole arrangement has no effect on the selectivity but can be used to force a transition from nanowire to nanotube growth by employing a highly competitive growth regime.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High yield of gaas nanowire arrays on si mediated by the pinning and contact angle of Ga, Amorphous silicon mediates a high yield in GaAs nanowire arrays on Si

  • Russo-Averchi, Eleonora
  • Vukajlovic Plestina, Jelena
  • Tütüncüoglu, Gözde
  • Matteini, Federico
  • Dalmau-Mallorquí, Anna
  • De La Mata, Maria|||0000-0002-1581-4838
  • Rüffer, Daniel
  • Potts, Heidi A.
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Conesa-Boj, Sonia
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
GaAs nanowire arrays on silicon offer great perspectives in the optoelectronics and solar cell industry. To fulfill this potential, gold-free growth in predetermined positions should be achieved. Ga-assisted growth of GaAs nanowires in the form of array has been shown to be challenging and difficult to reproduce. In this work, we provide some of the key elements for obtaining a high yield of GaAs nanowires on patterned Si in a reproducible way: contact angle and pinning of the Ga droplet inside the apertures achieved by the modification of the surface properties of the nanoscale areas exposed to growth. As an example, an amorphous silicon layer between the crystalline substrate and the oxide mask results in a contact angle around 90°, leading to a high yield of vertical nanowires. Another example for tuning the contact angle is anticipated, native oxide with controlled thickness. This work opens new perspectives for the rational and reproducible growth of GaAs nanowire arrays on silicon.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced thermoelectric performance of solution-derived bismuth telluride based nanocomposites via liquid-phase sintering

  • Zhang, Chaohua
  • De La Mata, Maria|||0000-0002-1581-4838
  • Li, Zhong|||0000-0002-6009-629X
  • Belarre Triviño, Francisco Javier
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Khor, Khiam Aik|||0000-0003-1954-8423
  • Poletti, Dario
  • Zhu, Beibei|||0000-0001-5381-6634
  • Yan, Qingyu
  • Xiong, Qihua|||0000-0002-2555-4363
Bismuth telluride based thermoelectric materials show great promise in electricity generation from waste heat and solid-state refrigeration, but improving their conversion efficiency with economical approaches for widespread use remains a challenge. An economical facile bottom-up approach has been developed to obtain nanostructured powders, which are used to build bulk thermoelectric materials. Using excess tellurium as sacrificial additive to enable liquid-phase sintering in the spark plasma sintering process, the lattice and bipolar contributions to the thermal conductivity are both greatly reduced without compromising too much the power factor, which leads to the achievement of high figure of merit (ZT) in both n-type and p-type bismuth telluride based nanocomposites. The ZT values are 1.59±0.16 for p-type Bi0.5Sb1.5Te3 and 0.98±0.07 for n-type Bi2Te2.7Se0.3 at 370 K, which are significantly high for bottom-up approaches. These results demonstrate that solution-chemistry approaches as facile, scalable and low-energy-intensive ways to achieve nanopowders, combined with liquid-phase sintering process, can open up great possibilities in developing high-performance low-price thermoelectric bulk nanocomposites.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced activity and acid pH stability of Prussian blue-type oxygen evolution electrocatalysts processed by chemical etching

  • Han, Lijuan
  • Tang, PengYi|||0000-0002-2306-095X
  • Reyes-Carmona, Álvaro
  • Rodríguez-García, Bárbara
  • Torréns, Mabel
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
The development of upscalable oxygen evolving electrocatalysts from earth-abundant metals able to operate in neutral or acidic environments and low overpotentials remains a fundamental challenge for the realization of artificial photosynthesis. In this study, we report a highly active phase of heterobimetallic cyanide-bridged electrocatalysts able to promote water oxidation under neutral, basic (pH < 13), and acidic conditions (pH > 1). Cobalt-iron Prussian blue-type thin films, formed by chemical etching of Co(OH)₁.₀ (CO₃)₀.₅·nH₂O nanocrystals, yield a dramatic enhancement of the catalytic performance toward oxygen production, when compared with previous reports for analogous materials. Electrochemical, spectroscopic, and structural studies confirm the excellent performance, stability, and corrosion resistance, even when compared with state-of-the-art metal oxide catalysts under moderate overpotentials and in a remarkably large pH range, including acid media where most cost-effective water oxidation catalysts are not useful. The origin of the superior electrocatalytic activity toward water oxidation appears to be in the optimized interfacial matching between catalyst and electrode surface obtained through this fabrication method.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Orientation symmetry breaking in self-assembled Ce1-, XGdxO2- y nanowires derived from chemical solutions

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Martínez Orellana, Lidia|||0000-0002-9370-2962
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Gibert, Marta|||0000-0001-8856-6831
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hühne, Ruben
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a high-throughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented Ce₀.₉Gd₀.₁O₂ᵧ (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO₃ (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001)CGO[0-11](011)LAO[100] growth orientation, with the enlargement occurring along the [0-11]CGO direction with (111) lateral facets. The chosen substrate allowed us to study a unique case where the resulting biaxial strain is isotropic, while the dissimilar lateral surface energies are the key factor to obtain an energetically imbalanced and non-degenerated nanowire configuration. Rapid Thermal Annealing (RTA) has allowed sorting of experimental nucleation from coarsening and analysis of the kinetic phenomena of the nanowires. A thermodynamic driving force is shown to exist for a continuous elongation of the nanowires while the coarsening rates are found to be strongly temperature dependent and so kinetic effects are the key factors to control the size and density of the self-organized nanowire system. A remarkably fast nanowire growth rate (14-40 nm min⁻¹) is observed, which we associate with a high atomic mobility probably linked to a high concentration of oxygen vacancies, as detected by XPS. These nanowires are envisaged as model systems pushing forward the study of low energetic and highly oxygen deficient {111} lateral facets useful for catalysis, gas sensors and ionic conductivity applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Pd₂Sn [010] nanorods as a highly active and stable ethanol oxidation catalyst

  • Luo, Zhishan|||0000-0002-0801-9238
  • Lu, Jianmin
  • Flox, Cristina
  • Nafria, Raquel|||0000-0002-3254-1616
  • Genç, Aziz|||0000-0002-2888-2549
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of highly active, low cost and stable electrocatalysts for direct alcohol fuel cells remains a critical challenge. While Pd₂Sn has been reported as an excellent catalyst for the ethanol oxidation reaction (EOR), here we present DFT analysis results showing the (100) and (001) facets of orthorhombic PdSn to be more favourable for the EOR than (010). Accordingly, using tri-n-octylphosphine, oleylamine (OLA) and methylamine hydrochloride as size and shape directing agents, we produced colloidal Pd₂Sn nanorods (NRs) grown in the [010] direction. Such Pd₂Sn NRs, supported on graphitic carbon, showed excellent performance and stability as an anode electrocatalyst for the EOR in alkaline media, exhibiting 3 times and 10 times higher EOR current densities than that of PdSn and Pd nanospheres, respectively. We associate this improved performance with the favourable faceting of the NRs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Orientationally ordered silicon nanocrystal cuboctahedra in superlattices

  • Yu, Yixuan
  • Lu, Xiaotang
  • Guillaussier, Adrien
  • Voggu, Vikas Reddy
  • Pineros, William
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Smilgies, Detlef-M.
  • Truskett, Thomas M.
  • Korgel, Brian A.
Uniform silicon nanocrystals were synthesized with cuboctahedral shape and passivated with 1-dodecene capping ligands. Transmission electron microscopy, electron diffraction, and grazing incidence wide-angle and small-angle X-ray scattering show that these soft cuboctahedra assemble into face-centered cubic superlattices with orientational order. The preferred nanocrystal orientation was found to depend on the orientation of the superlattices on the substrate, indicating that the interactions with the substrate and assembly kinetics can influence the orientation of faceted nanocrystals in superlattices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fe₃O₄@NiFexOy nanoparticles with enhanced electrocatalytic properties for oxygen evolution in carbonate electrolyte

  • Luo, Zhishan|||0000-0002-0801-9238
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Nafria, Raquel|||0000-0002-3254-1616
  • Joshua, Gihan
  • De La Mata, Maria|||0000-0002-1581-4838
  • Guardia, Pablo|||0000-0001-9076-4642
  • Flox, Cristina
  • Martínez-Boubeta, Carlos
  • Simeonidis, Konstantinos
  • Llorca, Jordi|||0000-0002-7447-9582
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The design and engineering of earth-abundant catalysts that are both cost-effective and highly active for water splitting are crucial challenges in a number of energy conversion and storage technologies. In this direction, herein we report the synthesis of Fe₃O₄@NiFeO core-shell nanoheterostructures and the characterization of their electrocatalytic performance toward the oxygen evolution reaction (OER). Such nanoparticles (NPs) were produced by a two-step synthesis procedure involving the colloidal synthesis of Fe₃O₄ nanocubes with a defective shell and the posterior diffusion of nickel cations within this defective shell. Fe₃O₄@NiFeO NPs were subsequently spin-coated over ITO-covered glass and their electrocatalytic activity toward water oxidation in carbonate electrolyte was characterized. Fe₃O₄@NiFeO catalysts reached current densities above 1 mA/cm² with a 410 mV overpotential and Tafel slopes of 48 mV/dec, which is among the best electrocatalytic performances reported in carbonate electrolyte.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Surface hydrogen enables subeutectic vapor-liquid-solid semiconductor nanowire growth

  • Sivaram, Saujen V.
  • Hui, Ho Yee
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Filler, Michael A.
Vapor-liquid-solid nanowire growth below the bulk metal-semiconductor eutectic temperature is known for several systems; however, the fundamental processes that govern this behavior are poorly understood. Here, we show that hydrogen atoms adsorbed on the Ge nanowire sidewall enable AuGe catalyst supercooling and control Au transport. Our approach combines in situ infrared spectroscopy to directly and quantitatively determine hydrogen atom coverage with a "regrowth" step that allows catalyst phase to be determined with ex situ electron microscopy. Maintenance of a supercooled catalyst with only hydrogen radical delivery confirms the centrality of sidewall chemistry. This work underscores the importance of the nanowire sidewall and its chemistry on catalyst state, identifies new methods to regulate catalyst composition, and provides synthetic strategies for subeutectic growth in other nanowire systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrasensitive binder-free glucose sensors based on the pyrolysis of in situ grown Cu MOF

  • Zhang, Xuan|||0000-0002-3667-4280
  • Luo, Jiangshui
  • Tang, PengYi|||0000-0002-2306-095X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Xu, Cai-Ling|||0000-0001-9360-3668
  • Li, Qingfeng
  • Fransaer, Jan|||0000-0002-0232-0687
A non-enzymatic glucose sensor based on carbon/Cu composite materials was developed by the in-situ growth and subsequent pyrolysis of metal-organic frameworks (MOFs) on Cu foam. After pyrolysis, SEM, HRTEM and STEM-EELS were employed to clarify the hierarchical Cu@porous carbon electrode. It is found that the Cu nanoparticles are uniformly embedded in the carbon matrix, carbon matrix in close contact with the pyrolized carbon sheets. The electrocatalytic activity of the Cu@porous carbon matrix electrode for glucose sensing was explored by cyclic voltammetry (CV) and chronoamperometry. The resulting Cu@porous carbon matrix electrode displays ultrahigh sensitivity (10.1 mA cm⁻² mM⁻¹), low detection limit (0.6 μM), short response time (less than 2 s) and good stability, indicating that the developed electrode is a promising glucose sensor.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

NiSn bimetallic nanoparticles as stable electrocatalysts for methanol oxidation reaction

  • Li, Junshan|||0000-0002-1482-1972
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zuo, Yong|||0000-0003-1564-467X
  • Liu, Junfeng|||0000-0003-3164-6472
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Nickel is an excellent alternative catalyst to high cost Pt and Pt-group metals as anode material in direct methanol fuel cells. However, nickel presents a relatively low stability under operation conditions, even in alkaline media. In this work, a synthetic route to produce bimetallic NiSn nanoparticles (NPs) with tuned composition is presented. Through co-reduction of the two metals in the presence of appropriate surfactants, 3-5 nm NiSn NPs with tuned Ni/Sn ratios were produced. Such NPs were subsequently supported on carbon black and tested for methanol electro-oxidation in alkaline media. Among the different stoichiometries tested, the most Ni-rich alloy exhibited the highest electrocatalytic activity, with mass current density of 820 mA mg⁻¹ at 0.70 V (vs. Hg/HgO). While this activity was comparable to that of pure nickel NPs, NiSn alloys showed highly improved stabilities over periods of 10,000 s at 0.70 V. We hypothesize this experimental fact to be associated to the collaborative oxidation of the byproducts of methanol which poison the Ni surface or to the prevention of the tight adsorption of these species on the Ni surface by modifying its surface chemistry or electronic density of states.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Passivation layers for nanostructured photoanodes, Ultra-thin oxides on InGaN nanowires

  • Neuderth, Paula|||0000-0003-3468-2815
  • Hille, Pascal
  • Schörmann, Jörg
  • Frank, A.
  • Reitz, C.
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • De La Mata, Maria|||0000-0002-1581-4838
  • Coll, Mariona|||0000-0001-5157-7764
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Marschall, R.
  • Eickhoff, Martin
An experimental strategy for systematically assessing the influence of surface passivation layers on the photocatalytic properties of nanowire photoanodes by combining photocurrent analysis, photoluminescence spectroscopy and high resolution transmission electron microscopy with a systematic variation of sample structure and the surrounding electrolyte is demonstrated. Following this approach we can separate the impact on recombination and transport processes of photogenerated carriers. We apply this strategy to analyze the influence of ultra-thin TiO, CeO and AlO coatings deposited by atomic layer deposition on the photoelectrochemical performance of InGaN/GaN nanowire (NW) photoelectrodes. The passivation of surface states results in an increase of the anodic photocurrent (PC) by a factor of 2.5 for the deposition of 5 nm TiO. In contrast, the PC is reduced for CeO- and AlO-coated NWs due to enhanced defect recombination in the passivation layer or increased band discontinuities. Furthermore, photoelectrochemical oxidation of the InGaN/GaN NW photoelectrode is attenuated by the TiO layer and completely suppressed for a layer thickness of 7 nm or more. Due to efficient charge transfer from the InGaN NW core a stable TiO-covered photoanode with visible light excitation is realized.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Growth and luminescence of polytypic InP on epitaxial graphene

  • Mukherjee, Samik|||0000-0002-5279-1110
  • Nateghi, Nima
  • Jacobberger, Robert M.
  • Bouthillier, Etienne
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Coenen, Toon
  • Cardinal, Dhan
  • Levesque, Pierre
  • Desjardins, Patrick
  • Martel, Richard|||0000-0002-9021-4656
  • Arnold, Michael S.
  • Moutanabbir, Oussama|||0000-0002-0721-3696
Van der Waals epitaxy is an attractive alternative to direct heteroepitaxy where the forced coherency at the interface cannot sustain large differences in lattice parameters and thermal expansion coefficients between the substrate and the epilayer. Herein, the growth of monocrystalline InP on Ge and SiO/Si substrates using graphene as an interfacial layer is demonstrated. Micrometer-sized InP crystals are found to grow with interfaces of high crystalline quality and with different degrees of coalescence depending on the growth conditions. Some InP crystals exhibit a polytypic structure, consisting of alternating zinc-blende and wurtzite phases, forming a type-II homojunction with well (barrier) width of about 10 nm. The optical properties, investigated using room temperature nano-cathodoluminescence, indicate the signatures of the direct optical transitions at 1.34 eV across the gap of the zinc-blende phase and the indirect transitions at ≈1.31 eV originating from the alternating zinc-blende and wurtzite phases. Additionally, the InP nanorods, found growing mainly on the graphene/SiO/Si substrate, show optical transition across the gap of the wurtzite phase at ≈1.42 eV. This demonstration of InP growth on graphene and the correlative study between the structure and optical properties pave the way to develop hybrid structures for potential applications in integrated photonic and optoelectronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Crystallographically textured nanomaterials produced from the liquid phase sintering of BixSb₂-xTe₃ nanocrystal building blocks

  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Ortega, Silvia|||0000-0002-3812-5146
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Grau Carbonell, Albert
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Ng, Ka Ming
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cadavid, Doris|||0000-0002-1376-6078
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Bottom-up approaches for producing bulk nanomaterials have traditionally lacked control over the crystallographic alignment of nanograins. This limitation has prevented nanocrystal-based nanomaterials from achieving optimized performances in numerous applications. Here we demonstrate the production of nanostructured BixSb₂-xTe₃ alloys with controlled stoichiometry and crystallographic texture through proper selection of the starting building blocks and the adjustment of the nanocrystal-to-nanomaterial consolidation process. In particular, we hot pressed disk-shaped BixSb₂-xTe₃ nanocrystals and tellurium nanowires using multiple pressure and release steps at a temperature above the tellurium melting point. We explain the formation of the textured nanomaterials though a solution-reprecipitation mechanism under a uniaxial pressure. Additionally, we further demonstrate these alloys to reach unprecedented thermoelectric figures of merit, up to ZT = 1.96 at 420 K, with an average value of ZT = 1.77 for the record material in the temperature range 320-500 K, thus potentially allowing up to 60% higher energy conversion efficiencies than commercial materials.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Insights into the Performance of CoxNi1-xTiO3 Solid Solutions as Photocatalysts for Sun-Driven Water Oxidation

  • Murcia López, Sebastián|||0000-0002-3703-041X
  • Moschogiannaki, Marilena
  • Binas, Vassilios
  • Andreu, Teresa|||0000-0002-2804-4545
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Kiriakidis, George
  • Morante, Joan Ramon|||0000-0002-4981-4633
CoNiTiO systems evaluated as photo- and electrocatalytic materials for oxygen evolution reaction (OER) from water have been studied. These materials have shown promising properties for this half-reaction both under (unbiased) visible-light photocatalytic approach in the presence of an electron scavenger and as electrocatalysts in dark conditions in basic media. In both situations, CoNiTiO exhibits the best performance and is proved to display high faradaic efficiency. A synergetic effect between Co and Ni is established, improving the physicochemical properties such as surface area and pore size distribution, besides affecting the donor density and the charge carrier separation. At higher Ni content, the materials exhibit behavior more similar to that of NiTiO, which is a less suitable material for OER than CoTiO.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Solvothermal Synthesis, Gas-Sensing Properties, and Solar Cell-Aided Investigation of TiO2-MoOx Nanocrystals

  • Epifani, Mauro|||0000-0002-9242-6484
  • Kaciulis, Saulius|||0000-0002-9868-7626
  • Mezzi, Alessio|||0000-0002-2887-520X
  • Altamura, Davide|||0000-0003-2597-4883
  • Giannini, Cinzia|||0000-0003-0983-2885
  • Tang, PengYi|||0000-0002-2306-095X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Siciliano, Pietro|||0000-0001-9748-0925
  • Comini, Elisabetta|||0000-0003-2559-5197
  • Concina, Isabella
Titania anatase nanocrystals were prepared by sol-gel/solvothermal synthesis in oleic acid at 250 °C, and modified by co-reaction with Mo chloroalkoxide, aimed at investigating the effects on gas-sensing properties induced by tailored nanocrystals surface modification with ultra-thin layers of MoO species. For the lowest Mo concentration, only anatase nanocrystals were obtained, surface modified by a disordered ultra-thin layer of mainly octahedral Mo oxide species. For larger Mo concentrations, early MoO phase segregation occurred. Upon heat treatment up to 500 °C, the sample with the lowest Mo concentration did not feature any Mo oxide phase segregation, and the surface Mo layer was converted to dense octahedral Mo oxide. At larger Mo concentrations all segregated MoO was converted to MoO. The two different materials typologies, depending on the Mo concentration, were used for processing gas-sensing devices and tested toward acetone and carbon monoxide, which gave a greatly enhanced response, for all Mo concentrations, to acetone (two orders of magnitude) and carbon monoxide with respect to pure TiO. For the lowest Mo concentration, dye-sensitized solar cells were also prepared to investigate the influence of anatase surface modification on the electrical transport properties, which showed that the charge transport mainly occurred in the ultra-thin MoO surface layer.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

SnP nanocrystals as anode materials for Na-ion batteries

  • Liu, Junfeng|||0000-0003-3164-6472
  • Wang, Shutao|||0000-0002-1689-2272
  • Kravchyk, Kostiantyn
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Krumeich, Frank|||0000-0001-5625-1536
  • Widmer, Roland
  • Nasiou, Déspina
  • Meyns, Michaela|||0000-0003-2476-9001
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Tin monophosphide is a layered material consisting of Sn-P-P-Sn sandwiches that are stacked on top of each other to form a three dimensional crystallographic structure. Its composition and crystal structure makes it an excellent candidate anode material for sodium-ion batteries (SIBs). However, SnP is yet to be explored for such and other applications due to its challenging synthesis. In the present work, we report the synthesis of SnP nanocrystals (NCs) from the reaction of hexamethylphosphorous triamide (HMPT) and a tin phosphonate prepared from tin oxalate and a long chain phosphonic acid. SnP NCs obtained from this reaction displayed a spherical geometry and a trigonal crystallographic phase with a superstructure attributed to ordered diphosphorus pairs. Such NCs were mixed with carbon black and used as anode materials in SIBs. SIBs based on SnP NCs and sodium(i) bis(fluorosulfonyl)imide (NaFSI) electrolyte displayed a high reversible capacity of 600 mA h g at a current density of 100 mA g and cycling stability for over 200 cycles. Their excellent cycling performance is associated with both the small size of the crystal domains and the particular composition and phase of SnP which prevent mechanical disintegration and major phase separation during sodiation and desodiation cycles. These results demonstrate SnP to be an attractive anode material for sodium ion batteries.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reduction of Thermal Conductivity in Nanowires by Combined Engineering of Crystal Phase and Isotope Disorder

  • Mukherjee, Samik|||0000-0002-5279-1110
  • Givan, Uri
  • Senz, Stephan
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Moutanabbir, Oussama|||0000-0002-0721-3696
Nanowires are a versatile platform to investigate and harness phonon and thermal transport phenomena in nanoscale systems. With this perspective, we demonstrate herein the use of crystal phase and mass disorder as effective degrees of freedom to manipulate the behavior of phonons and control the flow of local heat in silicon nanowires. The investigated nanowires consist of isotopically pure and isotopically mixed nanowires bearing either a pure diamond cubic or a cubic-rhombohedral polytypic crystal phase. The nanowires with tailor-made isotopic compositions were grown using isotopically enriched silane precursors SiH, SiH, and SiH with purities better than 99.9%. The analysis of polytypic nanowires revealed ordered and modulated inclusions of lamellar rhombohedral silicon phases toward the center in otherwise diamond-cubic lattice with negligible interphase biaxial strain. Raman nanothermometry was employed to investigate the rate at which the local temperature of single suspended nanowires evolves in response to locally generated heat. Our analysis shows that the lattice thermal conductivity in nanowires can be tuned over a broad range by combining the effects of isotope disorder and the nature and degree of polytypism on phonon scattering. We found that the thermal conductivity can be reduced by up to ∼40% relative to that of isotopically pure nanowires, with the lowest value being recorded for the rhombohedral phase in isotopically mixed Si Si nanowires with composition close to the highest mass disorder (x ∼ 0.5). These results shed new light on the fundamentals of nanoscale thermal transport and lay the groundwork to design innovative phononic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Colloidal Silicon-Germanium Nanorod Heterostructures

  • Lu, Xiaotang
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Korgel, Brian A.
Colloidal nanorods with axial Si and Ge heterojunction segments were produced by solution-liquid-solid (SLS) growth using Sn as a seed metal and trisilane and diphenylgermane as Si and Ge reactants. The low solubility of Si and Ge in Sn helps to generate abrupt Si-Ge heterojunction interfaces. To control the composition of the nanorods, it was also necessary to limit an undesired side reaction between the Ge reaction byproduct tetraphenylgermane and trisilane. High-resolution transmission electron microscopy reveals that the Si-Ge interfaces are epitaxial, which gives rise to a significant amount of bond strain resulting in interfacial misfit dislocations that nucleate stacking faults in the nanorods.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Growth of Au-Pd2Sn Nanorods via Galvanic Replacement and Their Catalytic Performance on Hydrogenation and Sonogashira Coupling Reactions

  • Nafria, Raquel|||0000-0002-3254-1616
  • Luo, Zhishan|||0000-0002-0801-9238
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Yu, Xiaoting|||0000-0003-0457-4047
  • De La Mata, Maria|||0000-0002-1581-4838
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Grabulosa, Arnald|||0000-0003-0198-4139
  • Muller, Guillermo|||0000-0001-6876-0389
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Colloidal PdSn and Au-PdSn nanorods (NRs) with tuned size were produced by the reduction of Pd and Sn salts in the presence of size- and shape-controlling agents and the posterior growth of Au tips through a galvanic replacement reaction. PdSn and Au-PdSn NRs exhibited high catalytic activity toward quasi-homogeneous hydrogenation of alkenes (styrene and 1-octene) and alkynes (phenylacetylene and 1-octyne) in dichloromethane. Au-PdSn NRs showed higher activity than PdSn for 1-octene, 1-octyne, and phenylacetylene. In Au-PdSn heterostructures, X-ray photoelectron spectroscopy evidenced an electron donation from the PdSn NR to the Au tips. Such heterostructures showed distinct catalytic behavior in the hydrogenation of compounds containing a triple bond such as tolan. This can be explained by the aurophilicity of triple bonds. To further study this effect, PdSn and Au-PdSn NRs were also tested in the Sonogashira coupling reaction between iodobenzene and phenylacetylene in N,N-dimethylformamide. At low concentration, this reaction provided the expected product, tolan. However, at high concentration, more reduced products such as stilbene and 1,2-diphenylethane were also obtained, even without the addition of H. A mechanism for this unexpected reduction is proposed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ligand-mediated band engineering in bottom-up assembled SnTe nanocomposites for thermoelectric energy conversion

  • Ibáñez, Maria|||0000-0001-5013-2843
  • Hasler, Roger
  • Genç, Aziz|||0000-0002-2888-2549
  • Liu, Yu|||0000-0001-7313-6740
  • Kuster, Beatrice
  • Schuster, Maximilian
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Cadavid, Doris|||0000-0002-1376-6078
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
The bottom-up assembly of colloidal nanocrystals is a versatile methodology to produce composite nanomaterials with precisely tuned electronic properties. Beyond the synthetic control over crystal domain size, shape, crystal phase, and composition, solution-processed nanocrystals allow exquisite surface engineering. This provides additional means to modulate the nanomaterial characteristics and particularly its electronic transport properties. For instance, inorganic surface ligands can be used to tune the type and concentration of majority carriers or to modify the electronic band structure. Herein, we report the thermoelectric properties of SnTe nanocomposites obtained from the consolidation of surface-engineered SnTe nanocrystals into macroscopic pellets. A CdSe-based ligand is selected to (i) converge the light and heavy bands through partial Cd alloying and (ii) generate CdSe nanoinclusions as a secondary phase within the SnTe matrix, thereby reducing the thermal conductivity. These SnTe-CdSe nanocomposites possess thermoelectric figures of merit of up to 1.3 at 850 K, which is, to the best of our knowledge, the highest thermoelectric figure of merit reported for solution-processed SnTe.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tuning transport properties in thermoelectric nanocomposites through inorganic ligands and heterostructured building blocks

  • Ibáñez, Maria|||0000-0001-5013-2843
  • Genç, Aziz|||0000-0002-2888-2549
  • Hasler, Roger
  • Liu, Yu|||0000-0001-7313-6740
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Nazarenko, Olga
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
Methodologies that involve the use of nanoparticles as "artificial atoms" to rationally build materials in a bottom-up fashion are particularly well-suited to control the matter at the nanoscale. Colloidal synthetic routes allow for an exquisite control over such "artificial atoms" in terms of size, shape, and crystal phase as well as core and surface compositions. We present here a bottom-up approach to produce Pb-Ag-K-S-Te nanocomposites, which is a highly promising system for thermoelectric energy conversion. First, we developed a high-yield and scalable colloidal synthesis route to uniform lead sulfide (PbS) nanorods, whose tips are made of silver sulfide (AgS). We then took advantage of the large surface-to-volume ratio to introduce a p-type dopant (K) by replacing native organic ligands with KTe. Upon thermal consolidation, KTe-surface modified PbS-AgS nanorods yield p-type doped nanocomposites with PbTe and PbS as major phases and AgS and AgTe as embedded nanoinclusions. Thermoelectric characterization of such consolidated nanosolids showed a high thermoelectric figure-of-merit of 1 at 620 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Degradation and regeneration mechanisms of NiO protective layers deposited by ALD on photoanodes, About degradation and regeneration mechanisms of NiO protective layers deposited by ALD on photoanodes

  • Ros, Carles|||0000-0002-9148-2767
  • Andreu, Teresa|||0000-0002-2804-4545
  • David, Jérémy|||0000-0003-3219-149X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
The use of high pH electrolytes requires protective layers to avoid corrosion in photoanodes based on semiconductors like silicon. NiO is one of the materials that comply with the requirements for transparency, conductivity, chemical stability and catalysis on the surface in contact with the electrolyte. Here, NiO layers have been deposited by atomic layer deposition (ALD) at low temperatures, and their stability is analyzed over 1000 hours. Due to the layer structure characteristics, the best overall performance was achieved at 100 °C deposition temperature. By electrochemical measurements progressive time dependent degradation under anodic working conditions is observed, attributed to the formation of higher nickel oxidation states at the electrode/electrolyte interface as a main degradation mechanism, resulting in an OER overpotential increase. Another minor degradation mechanism affects the optical surface quality and gives rise to a loss of photon absorption efficiency on the scale of hundreds of hours. A regeneration process based on in situ periodic cyclic voltammetry, bringing the electrodes to cathodic conditions every 3, 12 or 48 hours, has been shown to partially reverse the main degradation mechanism achieving 85% stability over 1000 hours in a study with over 10 mA cm photocurrent densities.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multi-scale analysis of the diffusion barrier layer of gadolinia-doped ceria in a solid oxide fuel cell operated in a stack for 3000 h

  • Morales, Miguel
  • Miguel Pérez, Verónica
  • Tarancón Rubio, Albert|||0000-0002-1933-2406
  • Slodczyk, A.
  • Torrell Faro, Marc
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Ouweltjes, Jan Pieter
  • Bassat, Jean-Marc
  • Montinaro, Dario
  • Morata, Alex|||0000-0002-3300-4636
The state-of-the-art materials for SOFCs are yttria-stabilized zirconia as electrolyte and lanthanum strontium cobalt ferrite as cathode. However, the formation of insulating phases between them requires the use of diffusion barriers, typically made of gadolinia doped ceria. The study of the stability of this layer during the fabrication and in operando is currently one of the major goals of the SOFC industry. In this work, the cation inter-diffusion at the cathode/barrier layer/electrolyte region is analysed for an anode-supported cell industrially fabricated by conventional techniques, assembled in a short-stack and tested under real operation conditions for 3000 h. A comprehensive study of this cell, and an equivalent non-operated one, is performed in order to understand the inter-diffusion mechanisms with possible effects on the final performance. The analyses evidence that the cation diffusion is occurring during the fabrication process. Despite the significant diffusion of Ce,Gd, Zr, Y and Sr cations, the formation of typically reported CGO-YSZ solid solution is not observed while the presence of isolated grains of SrZrOis proved. All in all, this study presents new insights into the stability of the typically employed diffusion barriers for solid oxide cells that will guide future strategies to improve their performance and durability.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cu2ZnSnS4-Ag2S nanoscale p-n heterostructures as sensitizers for photoelectrochemical water splitting

  • Yu, Xuelian
  • Liu, Jingjing
  • Genç, Aziz|||0000-0002-2888-2549
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Luo, Zhishan|||0000-0002-0801-9238
  • Shavel, Alexey|||0000-0002-3995-0391
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhang, Guangjin
  • Zhang, Yihe
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
A cation exchange-based route was used to produce CuZnSnS (CZTS)-AgS nanoparticles with controlled composition. We report a detailed study of the formation of such CZTS-AgS nanoheterostructures and of their photocatalytic properties. When compared to pure CZTS, the use of nanoscale p-n heterostructures as light absorbers for photocatalytic water splitting provides superior photocurrents. We associate this experimental fact to a higher separation efficiency of the photogenerated electron-hole pairs. We believe this and other type-II nanoheterostructures will open the door to the use of CZTS, with excellent light absorption properties and made of abundant and environmental friendly elements, to the field of photocatalysis.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cu2ZnSnS4-PtM (M = Co, Ni) nanoheterostructures for photocatalytic hydrogen evolution

  • Yu, Xuelian
  • An, Xiaoqiang
  • Genç, Aziz|||0000-0002-2888-2549
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhang, Yie
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We report the synthesis and photocatalytic and magnetic characterization of colloidal nanoheterostructures formed by combining a Pt-based magnetic metal alloy (PtCo, PtNi) with CuZnSnS (CZTS). While CZTS is one of the main candidate materials for solar energy conversion, the introduction of a Pt-based alloy on its surface strongly influences its chemical and electronic properties, ultimately determining its functionality. In this regard, up to a 15-fold increase of the photocatalytic hydrogen evolution activity was obtained with CZTS-PtCo when compared with CZTS. Furthermore, two times higher hydrogen evolution rates were obtained for CZTS-PtCo when compared with CZTS-Pt, in spite of the lower precious metal loading of the former. Besides, the magnetic properties of the PtCo nanoparticles attached to the CZTS nanocrystals were retained in the heterostructures, which could facilitate catalyst purification and recovery for its posterior recycling and/or reutilization.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced hetero-junction quality and performance of kesterite solar cells by aluminum hydroxide nanolayers and efficiency limitation revealed by atomic-resolution scanning transmission electron microscopy

  • Xie, Haibing|||0000-0002-5070-2882
  • Sánchez, Yudania
  • Tang, PengYi|||0000-0002-2306-095X
  • Espíndola-Rodríguez, Moisés
  • Guc, Maxim|||0000-0002-2072-9566
  • Calvo-Barrio, Lorenzo|||0000-0002-6993-1482
  • López-Marino, Simón|||0000-0002-3779-0224
  • Liu, Yu|||0000-0001-7313-6740
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Izquierdo-Roca, Victor
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Pérez-Rodríguez, Alejandro
  • Saucedo, Edgardo
A strategy for interface engineering of hetero-junctions in kesterite solar cells by using Al(OH) is demonstrated. The hydroxide nanolayers are prepared via a facile and fast wet chemical route, based on an aqueous solution of aluminum chlorides and thioacetamide. Considerable enhancement of open circuit voltage (V) (30-60 mV) and fill factor (FF) (10-20%) after this chemical treatment are observed, achieving a champion conversion efficiency of 9.1% and a champion FF of 70% (among the best FF in kesterite solar cells). The functional mechanism is systematically studied by current-voltage, capacitance-voltage, temperature dependence of current-voltage and photoluminescence measurements, which reveal that Al(OH) nanolayers can effectively reduce the interface recombination and largely improve the shunt resistance. Furthermore, atomic resolution high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) evidences the epitaxial relationship of Al(OH) with kesterite and CdS, indicating the benign and effective interface passivation achieved by this chemical treatment. Finally, based on HAADF-STEM and electron energy loss spectroscopy mappings, insights into the efficiency limiting and beneficial factors for CZTSSe solar cells, as well as suggestions to further improve both the bulk and related interfaces are presented.