Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Solution-based synthesis and processing of Sn- and Bi-doped Cu₃SbSe₄ nanocrystals, nanomaterials and ring-shaped thermoelectric generators

  • Liu, Yu|||0000-0001-7313-6740
  • Ortega, Silvia|||0000-0002-3812-5146
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Xi, Lili
  • De Roo, Jonathan
  • López Peña, Antonio M.|||0000-0002-6979-5783
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Cabezas, Ignasi
  • De La Mata, Maria|||0000-0002-1581-4838
  • Luo, Zhishan|||0000-0002-0801-9238
  • Dun, Chaochao
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Zhang, Wenqing
  • Martins, José
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Noriega, German
  • Song, Ji-Ming
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Copper-based chalcogenides that comprise abundant, low-cost, and environmental friendly elements are excellent materials for a number of energy conversion applications, including photovoltaics, photocatalysis, and thermoelectrics (TE). In such applications, the use of solution-processed nanocrystals (NCs) to produce thin films or bulk nanomaterials has associated several potential advantages, such as high material yield and throughput, and composition control with unmatched spatial resolution and cost. Here we report on the production of Cu₃SbSe₄ (CASe) NCs with tuned amounts of Sn and Bi dopants. After proper ligand removal, as monitored by nuclear magnetic resonance and infrared spectroscopy, these NCs were used to produce dense CASe bulk nanomaterials for solid state TE energy conversion. By adjusting the amount of extrinsic dopants, dimensionless TE figures of merit (ZT) up to 1.26 at 673 K were reached. Such high ZT values are related to an optimized carrier concentration by Sn doping, a minimized lattice thermal conductivity due to efficient phonon scattering at point defects and grain boundaries, and to an increase of the Seebeck coefficient obtained by a modification of the electronic band structure with Bi doping. Nanomaterials were further employed to fabricate ring-shaped TE generators to be coupled to hot pipes, which provided 20 mV and 1 mW per TE element when exposed to a 160 °C temperature gradient. The simple design and good thermal contact associated with the ring geometry and the potential low cost of the material solution processing may allow the fabrication of TE generators with short payback times.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High-performance thermoelectric nanocomposites from nanocrystal building blocks

  • Ibáñez, Maria|||0000-0001-5013-2843
  • Luo, Zhishan|||0000-0002-0801-9238
  • Genç, Aziz|||0000-0002-2888-2549
  • Piveteau, Laura
  • Ortega, Silvia|||0000-0002-3812-5146
  • Cadavid, Doris|||0000-0002-1376-6078
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Liu, Yu|||0000-0001-7313-6740
  • Nachtegaal, Maarten
  • Zebarjadi, Mona
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The efficient conversion between thermal and electrical energy by means of durable, silent and scalable solid-state thermoelectric devices has been a long standing goal. While nanocrystalline materials have already led to substantially higher thermoelectric efficiencies, further improvements are expected to arise from precise chemical engineering of nanoscale building blocks and interfaces. Here we present a simple and versatile bottom-up strategy based on the assembly of colloidal nanocrystals to produce consolidated yet nanostructured thermoelectric materials. In the case study on the PbS-Ag system, Ag nanodomains not only contribute to block phonon propagation, but also provide electrons to the PbS host semiconductor and reduce the PbS intergrain energy barriers for charge transport. Thus, PbS-Ag nanocomposites exhibit reduced thermal conductivities and higher charge carrier concentrations and mobilities than PbS nanomaterial. Such improvements of the material transport properties provide thermoelectric figures of merit up to 1.7 at 850 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Co-Cu Nanoparticles, Synthesis by Galvanic Replacement and Phase Rearrangement during Catalytic Activation

  • Nafria, Raquel|||0000-0002-3254-1616
  • Genç, Aziz|||0000-0002-2888-2549
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ramírez de la Piscina, Pilar
  • Homs, N.
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The control of the phase distribution in multicomponent nanomaterials is critical to optimize their catalytic performance. In this direction, while impressive advances have been achieved in the past decade in the synthesis of multicomponent nanoparticles and nanocomposites, element rearrangement during catalyst activation has been frequently overseen. Here, we present a facile galvanic replacement-based procedure to synthesize Co@Cu nanoparticles with narrow size and composition distributions. We further characterize their phase arrangement before and after catalytic activation. When oxidized at 350 °C in air to remove organics, Co@Cu core-shell nanostructures oxidize to polycrystalline CuO-CoO nanoparticles with randomly distributed CuO and CoO crystallites. During a posterior reduction treatment in H atmosphere, Cu precipitates in a metallic core and Co migrates to the nanoparticle surface to form Cu@Co core-shell nanostructures. The catalytic behavior of such Cu@Co nanoparticles supported on mesoporous silica was further analyzed toward CO hydrogenation in real working conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Thermoelectric properties of semiconductor-metal composites produced by particle blending

  • Liu, Yu|||0000-0001-7313-6740
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Ortega, Silvia|||0000-0002-3812-5146
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the quest for more efficient thermoelectric material able to convert thermal to electrical energy and vice versa, composites that combine a semiconductor host having a large Seebeck coefficient with metal nanodomains that provide phonon scattering and free charge carriers are particularly appealing. Here, we present our experimental results on the thermal and electrical transport properties of PbS-metal composites produced by a versatile particle blending procedure, and where the metal work function allows injecting electrons to the intrinsic PbS host. We compare the thermoelectric performance of composites with microcrystalline or nanocrystalline structures. The electrical conductivity of the microcrystalline host can be increased several orders of magnitude with the metal inclusion, while relatively high Seebeck coefficient can be simultaneously conserved. On the other hand, in nanostructured materials, the host crystallites are not able to sustain a band bending at its interface with the metal, becoming flooded with electrons. This translates into even higher electrical conductivities than the microcrystalline material, but at the expense of lower Seebeck coefficient values.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mn₃O₄@CoMn₂O₄-CoₓOy nanoparticles, Partial cation exchange synthesis and electrocatalytic properties toward the oxygen reduction and evolution reactions

  • Luo, Zhishan|||0000-0002-0801-9238
  • Irtem, Erdem
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Nafria, Raquel|||0000-0002-3254-1616
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Genç, Aziz|||0000-0002-2888-2549
  • De La Mata, Maria|||0000-0002-1581-4838
  • Liu, Yu|||0000-0001-7313-6740
  • Cadavid, Doris|||0000-0002-1376-6078
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Andreu, Teresa|||0000-0002-2804-4545
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Mn₃O₄@CoMn₂O₄ nanoparticles (NPs) were produced at low temperature and ambient atmosphere using a one-pot two-step synthesis protocol involving the cation exchange of Mn by Co in preformed Mn₃O₄ NPs. Selecting the proper cobalt precursor, the nucleation of CoₓOy crystallites at the Mn₃O₄@CoMn₂O₄ surface could be simultaneously promoted to form Mn₃O₄@CoMn₂O₄-CoₓOy NPs. Such heterostructured NPs were investigated for oxygen reduction and evolution reactions (ORR, OER) in alkaline solution. Mn₃O₄@CoMn₂O₄-CoₓOy NPs with [Co]/[Mn] = 1 showed low overpotentials of 0.31 V at -3 mA·cm-2 and a small Tafel slope of 52 mV·dec-1 for ORR, and overpotentials of 0.31 V at 10 mA·cm-2 and a Tafel slope of 81 mV·dec-1 for OER, thus outperforming commercial Pt-, IrO2-based and previously reported transition metal oxides. This cation-exchange-based synthesis protocol opens up a new approach to design novel heterostructured NPs as efficient nonprecious metal bifunctional oxygen catalysts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Scalable Heating-Up Synthesis of Monodisperse Cu2ZnSnS4 Nanocrystals

  • Shavel, Alexey|||0000-0002-3995-0391
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Luo, Zhishan|||0000-0002-0801-9238
  • De Roo, Jonathan
  • Carrete, Alex
  • Dimitrievska, Mirjana|||0000-0002-9439-1019
  • Genç, Aziz|||0000-0002-2888-2549
  • Meyns, Michaela|||0000-0003-2476-9001
  • Pérez-Rodríguez, Alejandro
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Monodisperse CuZnSnS (CZTS) nanocrystals (NCs), with quasi-spherical shape, were prepared by a facile, high-yield, scalable, and high-concentration heat-up procedure. The key parameters to minimize the NC size distribution were efficient mixing and heat transfer in the reaction mixture through intensive argon bubbling and improved control of the heating ramp stability. Optimized synthetic conditions allowed the production of several grams of highly monodisperse CZTS NCs per batch, with up to 5wt% concentration in a crude solution and a yield above 90%.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Size and aspect ratio control of Pd₂Sn nanorods and their water denitration properties

  • Luo, Zhishan|||0000-0002-0801-9238
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Antolín, Ana M.
  • Genç, Aziz|||0000-0002-2888-2549
  • Shavel, Alexei
  • Contreras, Sandra
  • Medina, Francesc
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Monodisperse Pd₂Sn nanorods with tuned size and aspect ratio were prepared by co-reduction of metal salts in the presence of trioctylphosphine, amine, and chloride ions. Asymmetric Pd₂Sn nanostructures were achieved by the selective desorption of a surfactant mediated by chlorine ions. A preliminary evaluation of the geometry influence on catalytic properties evidenced Pd₂Sn nanorods to have improved catalytic performance. In view of these results, Pd₂Sn nanorods were also evaluated for water denitration.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Pd₂Sn [010] nanorods as a highly active and stable ethanol oxidation catalyst

  • Luo, Zhishan|||0000-0002-0801-9238
  • Lu, Jianmin
  • Flox, Cristina
  • Nafria, Raquel|||0000-0002-3254-1616
  • Genç, Aziz|||0000-0002-2888-2549
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of highly active, low cost and stable electrocatalysts for direct alcohol fuel cells remains a critical challenge. While Pd₂Sn has been reported as an excellent catalyst for the ethanol oxidation reaction (EOR), here we present DFT analysis results showing the (100) and (001) facets of orthorhombic PdSn to be more favourable for the EOR than (010). Accordingly, using tri-n-octylphosphine, oleylamine (OLA) and methylamine hydrochloride as size and shape directing agents, we produced colloidal Pd₂Sn nanorods (NRs) grown in the [010] direction. Such Pd₂Sn NRs, supported on graphitic carbon, showed excellent performance and stability as an anode electrocatalyst for the EOR in alkaline media, exhibiting 3 times and 10 times higher EOR current densities than that of PdSn and Pd nanospheres, respectively. We associate this improved performance with the favourable faceting of the NRs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fe₃O₄@NiFexOy nanoparticles with enhanced electrocatalytic properties for oxygen evolution in carbonate electrolyte

  • Luo, Zhishan|||0000-0002-0801-9238
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Nafria, Raquel|||0000-0002-3254-1616
  • Joshua, Gihan
  • De La Mata, Maria|||0000-0002-1581-4838
  • Guardia, Pablo|||0000-0001-9076-4642
  • Flox, Cristina
  • Martínez-Boubeta, Carlos
  • Simeonidis, Konstantinos
  • Llorca, Jordi|||0000-0002-7447-9582
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The design and engineering of earth-abundant catalysts that are both cost-effective and highly active for water splitting are crucial challenges in a number of energy conversion and storage technologies. In this direction, herein we report the synthesis of Fe₃O₄@NiFeO core-shell nanoheterostructures and the characterization of their electrocatalytic performance toward the oxygen evolution reaction (OER). Such nanoparticles (NPs) were produced by a two-step synthesis procedure involving the colloidal synthesis of Fe₃O₄ nanocubes with a defective shell and the posterior diffusion of nickel cations within this defective shell. Fe₃O₄@NiFeO NPs were subsequently spin-coated over ITO-covered glass and their electrocatalytic activity toward water oxidation in carbonate electrolyte was characterized. Fe₃O₄@NiFeO catalysts reached current densities above 1 mA/cm² with a 410 mV overpotential and Tafel slopes of 48 mV/dec, which is among the best electrocatalytic performances reported in carbonate electrolyte.