Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Synthesis and thermoelectric properties of noble metal ternary chalcogenide systems of Ag-Au-Se in the forms of alloyed nanoparticles and colloidal nanoheterostructures

  • Dalmases Solé, Mariona
  • Ibañez, María
  • Torruella Besa, Pau
  • Fernàndez Altable, Víctor
  • López Conesa, Lluís
  • Cadavid, Doris
  • Piveteau, Laura
  • Nachtegaal, Maarten
  • Llorca, Jordi, 1966-
  • Ruiz González, María Luisa
  • Estradé Albiol, Sònia
  • Peiró Martínez, Francisca
  • Kovalenko, Maksym V.
  • Cabot i Codina, Andreu
  • Figuerola i Silvestre, Albert
The optimization of a material functionality requires both the rational design and precise engineering of its structural and chemical parameters. In this work, we show how colloidal chemistry is an excellent synthetic choice for the synthesis of novel ternary nanostructured chalcogenides, containing exclusively noble metals, with tailored morphology and composition and with potential application in the energy conversion field. Specifically, the Ag-Au-Se system has been explored from a synthetic point of view, leading to a set of Ag2Se-based hybrid and ternary nanoparticles, including the room temperature synthesis of the rare ternary Ag3AuSe2 fischesserite phase. An in-depth structural and chemical charac-terization of all nanomaterials has been performed, which proofed especially useful for unravelling the reaction mecha-nism behind the formation of the ternary phase in solution. The work is complemented with the thermal and electric characterization of a ternary Ag-Au-Se nanocomposite with promising results: we found that the use of the ternary nano-composite represents a clear improvement in terms of thermoelectric energy conversion as compared to a binary Ag-Se nanocomposite analogue.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Scalable heating-up synthesis of monodisperse Cu2ZnSnS4 nanocrystals

  • Shavel, Alexey
  • Ibáñez Sabaté, Maria
  • Luo, Zhishan
  • De Roo, Jonathan
  • Carreté, Àlex
  • Dimitrievska, Mirjana
  • Genç, Aziz
  • Meyns, Michael
  • Pérez Rodríguez, Alejandro
  • Kovalenko, Maksym V.
  • Arbiol i Cobos, Jordi
  • Cabot i Codina, Andreu
Monodisperse Cu2ZnSnS4 (CZTS) nanocrystals (NCs), with quasi-spherical shape, were prepared by a facile, high-yield, scalable, and high-concentration heat-up procedure. The key parameters to minimize the NC size distribution were efficient mixing and heat transfer in the reaction mixture through intensive argon bubbling and improved control of the heating ramp stability. Optimized synthetic conditions allowed the production of several grams of highly monodisperse CZTS NCs per batch, with up to 5 wt % concentration in a crude solution and a yield above 90%.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-performance thermoelectric nanocomposites from nanocrystal building blocks

  • Ibáñez, María
  • Luo, ZhiShan
  • Genç, Aziz
  • Arbiol, Jordi
  • Cabot, Andreu
et al., The efficient conversion between thermal and electrical energy by means of durable, silent and scalable solid-state thermoelectric devices has been a long standing goal. While nanocrystalline materials have already led to substantially higher thermoelectric efficiencies, further improvements are expected to arise from precise chemical engineering of nanoscale building blocks and interfaces. Here we present a simple and versatile bottom-up strategy based on the assembly of colloidal nanocrystals to produce consolidated yet nanostructured thermoelectric materials. In the case study on the PbS-Ag system, Ag nanodomains not only contribute to block phonon propagation, but also provide electrons to the PbS host semiconductor and reduce the PbS intergrain energy barriers for charge transport. Thus, PbS-Ag nanocomposites exhibit reduced thermal conductivities and higher charge carrier concentrations and mobilities than PbS nanomaterial. Such improvements of the material transport properties provide thermoelectric figures of merit up to 1.7 at 850 K., At IREC, work was supported by European Regional Development Funds and the Framework 7 program under project UNION (FP7-NMP 310250). M.I. and S.O. thank AGAUR for their Beatriu i Pinos post-doctoral grant (2013 BP-A00344) and the PhD grant, respectively. A.G. thanks to the Turkish Ministry of National Education for the PhD grant. A.G. and J.A. acknowledge the Spanish MINECO MAT2014-51480-ERC (e-ATOM) and the ICN2 Severo Ochoa Excellence Program. Z.L. and Y.L. thanks the China Scholarship Council for their PhD grant. IREC and ICN2 groups acknowledge the funding from Generalitat de Catalunya 2014SGR1638. The work performed at Rutgers was supported by NSF grant number 1400246. M.V.K. acknowledges partial financial support by the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scalable heating-up synthesis of monodisperse Cu2ZnSnS4 nanocrystals

  • Shavel, Alexey
  • Ibáñez, María
  • Luo, ZhiShan
  • Genç, Aziz
  • Meyns, Michaela
  • Arbiol, Jordi
  • Cabot, Andreu
et al., Monodisperse CuZnSnS (CZTS) nanocrystals (NCs), with quasi-spherical shape, were prepared by a facile, high-yield, scalable, and high-concentration heat-up procedure. The key parameters to minimize the NC size distribution were efficient mixing and heat transfer in the reaction mixture through intensive argon bubbling and improved control of the heating ramp stability. Optimized synthetic conditions allowed the production of several grams of highly monodisperse CZTS NCs per batch, with up to 5 wt % concentration in a crude solution and a yield above 90%., This work was supported by the European Regional Development Funds and the Framework 7 program under the projects UNION (FP7-NMP-2012-310250), SCALENANO (FP7-NMP-ENERGY-2011-284486) and KESTCELLS (FP7/2007- 2013/316488) and the Spanish MINECO Project BOOSTER (ENE2013-46624-C4-3-R). M.I. thanks AGAUR for their Beatriu de Pinós postdoctoral grant (2013 BP-A00344). J.D.R. thanks the FWO (Research Foundation Flanders) for financial support. M.V.K. acknowledges partial financial supportby the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733). Authors also acknowledge the funding from Generalitat de Catalunya 2014 SGR 1638., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric properties of semiconductor-metal composites produced by particle blending

  • Liu, Yu
  • Cadavid, Doris
  • Ibáñez, María
  • Ortega, Silvia
  • Martí-Sànchez, Sara
  • Dobrozhan, Oleksandr
  • Kovalenko, Maksym V.
  • Arbiol, Jordi
  • Cabot, Andreu
In the quest for more efficient thermoelectric material able to convert thermal to electrical energy and vice versa, composites that combine a semiconductor host having a large Seebeck coefficient with metal nanodomains that provide phonon scattering and free charge carriers are particularly appealing. Here, we present our experimental results on the thermal and electrical transport properties of PbS-metal composites produced by a versatile particle blending procedure, and where the metal work function allows injecting electrons to the intrinsic PbS host. We compare the thermoelectric performance of composites with microcrystalline or nanocrystalline structures. The electrical conductivity of the microcrystalline host can be increased several orders of magnitude with the metal inclusion, while relatively high Seebeck coefficient can be simultaneously conserved. On the other hand, in nanostructured materials, the host crystallites are not able to sustain a band bending at its interface with the metal, becoming flooded with electrons. This translates into even higher electrical conductivities than the microcrystalline material, but at the expense of lower Seebeck coefficient values., This work was supported by the European Regional Development Funds, the Framework 7 program under project UNION (No. FP7-NMP-2012-310250), and the Spanish MINECO Project BOOSTER (No. ENE2013-46624-C4-3-R). Y.L. thanks the China Scholarship Council (No. CSC 201406500003) for the scholarship support. M.I., O.D., and S.O. thank AGAUR for their Beatriu de Pinós postdoctoral Grant No. (2013 BP-A00344) and Ph.D. grants. M.V.K. acknowledges the partial financial support from the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733). Authors also acknowledge the funding from Generalitat de Catalunya 2014 SGR 1638., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystallographically textured nanomaterials produced from the liquid phase sintering of BixSb2–xTe3 nanocrystal building blocks

  • Liu, Yu
  • Zhang, Yu
  • Ortega, Silvia
  • Ibáñez, María
  • Lim, Khak Ho
  • Grau-Carbonell, Albert
  • Martí-Sànchez, Sara
  • Ng, Ka Ming
  • Arbiol, Jordi
  • Kovalenko, Maksym V.
  • Cadavid, Doris
  • Cabot, Andreu
Bottom-up approaches for producing bulk nanomaterials have traditionally lacked control over the crystallographic alignment of nanograins. This limitation has prevented nanocrystal-based nanomaterials from achieving optimized performances in numerous applications. Here we demonstrate the production of nanostructured BixSb2–xTe3 alloys with controlled stoichiometry and crystallographic texture through proper selection of the starting building blocks and the adjustment of the nanocrystal-to-nanomaterial consolidation process. In particular, we hot pressed disk-shaped BixSb2–xTe3 nanocrystals and tellurium nanowires using multiple pressure and release steps at a temperature above the tellurium melting point. We explain the formation of the textured nanomaterials though a solution–reprecipitation mechanism under a uniaxial pressure. Additionally, we further demonstrate these alloys to reach unprecedented thermoelectric figures of merit, up to ZT = 1.96 at 420 K, with an average value of ZTave = 1.77 for the record material in the temperature range 320–500 K, thus potentially allowing up to 60% higher energy conversion efficiencies than commercial materials., This work was supported by the European Regional Development Funds. Y.L. and Y.Z. thank the China Scholarship Council for scholarship support. M.V.K. acknowledges partial financial support by the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733). S.M.-S. acknowledges funding from “Programa Internacional de Becas ‘la Caixa’-Severo Ochoa”. IREC and ICN2 acknowledge funding from Generalitat de Catalunya 2014 SGR 1638. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant No. SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High thermoelectric performance in crystallographically textured n-type Bi2Te3–xSex produced from asymmetric colloidal nanocrystals

  • Liu, Yu
  • Lim, Khak Ho
  • Ibáñez, María
  • Ortega, Silvia
  • Li, Mengyao
  • David, Jeremy
  • Martí-Sànchez, Sara
  • Ng, Ka Ming
  • Arbiol, Jordi
  • Kovalenko, Maksym V.
  • Cadavid, Doris
  • Cabot, Andreu
In the present work, we demonstrate crystallographically textured n-type Bi2Te3–xSex nanomaterials with exceptional thermoelectric figures of merit produced by consolidating disk-shaped Bi2Te3–xSex colloidal nanocrystals (NCs). Crystallographic texture was achieved by hot pressing the asymmetric NCs in the presence of an excess of tellurium. During the hot press, tellurium acted both as lubricant to facilitate the rotation of NCs lying close to normal to the pressure axis and as solvent to dissolve the NCs approximately aligned with the pressing direction, which afterward recrystallize with a preferential orientation. NC-based Bi2Te3–xSex nanomaterials showed very high electrical conductivities associated with large charge carrier concentrations, n. We hypothesize that such large n resulted from the presence of an excess of tellurium during processing, which introduced a high density of donor TeBi antisites. Additionally, the presence in between grains of traces of elemental Te, a narrow band gap semiconductor with a work function well below Bi2Te3–xSex, might further contribute to increase n through spillover of electrons, while at the same time blocking phonon propagation and hole transport through the nanomaterial. NC-based Bi2Te3–xSex nanomaterials were characterized by very low thermal conductivities in the pressing direction, which resulted in ZT values up to 1.31 at 438 K in this direction. This corresponds to a ca. 40% ZT enhancement from commercial ingots. Additionally, high ZT values were extended over wider temperature ranges due to reduced bipolar contribution to the Seebeck coefficient and the thermal conductivity. Average ZT values up to 1.15 over a wide temperature range, 320 to 500 K, were measured, which corresponds to a ca. 50% increase over commercial materials in the same temperature range. Contrary to most previous works, highest ZT values were obtained in the pressing direction, corresponding to the c crystallographic axis, due to the predominance of the thermal conductivity reduction over the electrical conductivity difference when comparing the two crystal directions., This work was supported by the European Regional Development Funds. Y.L. and Y.Z. thank the China Scholarship Council for scholarship support. M.V.K. acknowledges partial financial support by the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA no. 306733). S.M.S. acknowledges funding from “Programa Internacional de Becas “la Caixa”-Severo Ochoa”. J.D. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 665919. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and IREC from 2017 SGR 1246. ICN2 members acknowledge support from the Severo Ochoa Programme (MINECO, grant no. SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya. J.A., S.M.S., and J.D. acknowledge funding from MINECO subproject ANAPHASE (ENE2017-85087-C3)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ligand-mediated band engineering in bottom-up assembled SnTe nanocomposites for thermoelectric energy conversion

  • Ibáñez, María
  • Hasler, Roger
  • Genç, Aziz
  • Liu, Yu
  • Kuster, Beatrice
  • Scguster, Maximilian
  • Dobrozhan, Oleksandr
  • Cadavid, Doris
  • Arbiol, Jordi
  • Cabot, Andreu
  • Kovalenko, Maksym V.
The bottom-up assembly of colloidal nanocrystals is a versatile methodology to produce composite nanomaterials with precisely tuned electronic properties. Beyond the synthetic control over crystal domain size, shape, crystal phase, and composition, solution-processed nanocrystals allow exquisite surface engineering. This provides additional means to modulate the nanomaterial characteristics and particularly its electronic transport properties. For instance, inorganic surface ligands can be used to tune the type and concentration of majority carriers or to modify the electronic band structure. Herein, we report the thermoelectric properties of SnTe nanocomposites obtained from the consolidation of surface-engineered SnTe nanocrystals into macroscopic pellets. A CdSe-based ligand is selected to (i) converge the light and heavy bands through partial Cd alloying and (ii) generate CdSe nanoinclusions as a secondary phase within the SnTe matrix, thereby reducing the thermal conductivity. These SnTe-CdSe nanocomposites possess thermoelectric figures of merit of up to 1.3 at 850 K, which is, to the best of our knowledge, the highest thermoelectric figure of merit reported for solution-processed SnTe., This work was financially supported by the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733). M.I. was supported by IST Austria, and by ETH Zurich via ETH career seed grant (SEED-18 16-2). Y.L. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 754411. IREC acknowledges funding from Generalitat de Catalunya (2014SGR1638). J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated projects between IREC and ICN2 ENE2017-85087-C3. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning transport properties in thermoelectric nanocomposites through inorganic ligands and heterostructured building blocks

  • Ibáñez, María
  • Genç, Aziz
  • Hasler, Roger
  • Liu, Yu
  • Dobrozhan, Oleksandr
  • Nazarenko, Olga
  • Mata, Maria de la
  • Arbiol, Jordi
  • Cabot, Andreu
  • Kovalenko, Maksym V.
Methodologies that involve the use of nanoparticles as “artificial atoms” to rationally build materials in a bottom-up fashion are particularly well-suited to control the matter at the nanoscale. Colloidal synthetic routes allow for an exquisite control over such “artificial atoms” in terms of size, shape, and crystal phase as well as core and surface compositions. We present here a bottom-up approach to produce Pb–Ag–K–S–Te nanocomposites, which is a highly promising system for thermoelectric energy conversion. First, we developed a high-yield and scalable colloidal synthesis route to uniform lead sulfide (PbS) nanorods, whose tips are made of silver sulfide (Ag2S). We then took advantage of the large surface-to-volume ratio to introduce a p-type dopant (K) by replacing native organic ligands with K2Te. Upon thermal consolidation, K2Te-surface modified PbS–Ag2S nanorods yield p-type doped nanocomposites with PbTe and PbS as major phases and Ag2S and Ag2Te as embedded nanoinclusions. Thermoelectric characterization of such consolidated nanosolids showed a high thermoelectric figure-of-merit of 1 at 620 K., This work was financially supported by the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733). M.I. was supported by IST Austria and by ETH Zurich via an ETH career seed grant (SEED-18 16-2). Y.L. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 754411. IREC receives funding from Generalitat de Catalunya (2014SGR1638). ICN2 acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High-performance thermoelectric nanocomposites from nanocrystal building blocks, High-performance thermoelectric nanocomposites from nanocrystal building blocks

  • Ibañez, Maria
  • Zhishan, Luo
  • Aziz, Genc
  • Piveteau, Laura
  • Ortega, Silvia
  • Cadavid, Doris|||0000-0002-1376-6078
  • Dobrozhan, Oleksandr
  • Yu, Liu
  • Nachtegaal, Maarten
  • Zebarjadi, Mona
  • Arbio, Jordi
  • Kovalenko, Maksym V.
  • Cabot, Andreu
he efficient conversion between thermal and electrical energy by means of durable, silent and scalable solid-state thermoelectric devices has been a long standing goal. While nanocrystalline materials have already led to substantially higher thermoelectric efficiencies, further improvements are expected to arise from precise chemical engineering of nanoscale building blocks and interfaces. Here we present a simple and versatile bottom-up strategy based on the assembly of colloidal nanocrystals to produce consolidated yet nanostructured thermoelectric materials. In the case study on the PbS-Ag system, Ag nanodomains not only contribute to block phonon propagation, but also provide electrons to the PbS host semiconductor and reduce the PbS intergrain energy barriers for charge transport. Thus, PbS-Ag nanocomposites exhibit reduced thermal conductivities and higher charge carrier concentrations and mobilities than PbS nanomaterial. Such improvements of the material transport properties provide thermoelectric figures of merit up to 1.7 at 850 K., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Solution-based synthesis and processing of Sn- and Bi-doped Cu3SbSe4 nanocrystals, nanomaterials and ring-shaped thermoelectric generators

  • Liu, Yu
  • García, Gregorio
  • Ortega, Silvia
  • Cadavid, Doris|||0000-0002-1376-6078
  • Palacios, Pablo
  • Lu, Yinju
  • Ibáñez, María
  • Xi, Lili
  • De Roo, Jonathan
  • López Martínez, Antonio Miguel|||0000-0001-7232-0415
  • Martí-Sánchez, Sara
  • De la Mata, María
  • Albiol, Jordi
  • Cabot, Andreu
Copper-based chalcogenides that comprise abundant, low-cost, and environmental friendly elements are excellent materials for a number of energy conversion applications, including photovoltaics, photocatalysis, and thermoelectrics (TE). In such applications, the use of solution-processed nanocrystal (NC) to produce thin films or bulk nanomaterials has associated several potential advantages, such as high material yield and throughput, and composition control with unmatched spatial resolution and cost. Here we report on the production of Cu3SbSe4 (CASe) NCs with tuned amounts of Sn and Bi dopants. After proper ligand removal, as monitored by nuclear magnetic resonance and infrared spectroscopies, these NCs were used to produce dense CASe bulk nanomaterials for solid state TE energy conversion. By adjusting the amount of extrinsic dopants, dimensionless TE figures of merit (ZT) up to 1.26 at 673 K were reached. Such high ZT values are related to an optimized carrier concentration by Sn doping, a minimized lattice thermal conductivity due to efficient phonon scattering at point defects and grain boundaries, and to an increase of the Seebeck coefficient obtained by a modification of the electronic band structure with the Bi doping. Nanomaterials were further employed to fabricate ring-shaped TE generators to be coupled to hot pipes and which provided 20 mV and 1 mW per TE element when exposed to a 160 °C temperature gradient. The simple design and good thermal contact associated with the ring geometry and the potential low cost of the material solution processing may allow the fabrication of TE generators with short payback times., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Thermoelectric properties of semiconductor-metal composites produced by particle blending

  • Liu, Yu
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibañez, Maria
  • Ortega, Silvia
  • Marti-Sanchez, Sara
  • Dobrozhan, Oleksandr
  • Kovalenko, Maksym V.
  • Arbiol, Jordi
  • Cabot, Andreu
In the quest for more efficient thermoelectric material able to convert thermal to electrical energy and vice versa, composites that combine a semiconductor host having a large Seebeck coefficient with metal nanodomains that provide phonon scattering and free charge carriers are particularly appealing. Here, we present our experimental results on the thermal and electrical transport properties of PbS-metal composites produced by a versatile particle blending procedure, and where the metal work function allows injecting electrons to the intrinsic PbS host. We compare the thermoelectric performance of composites with microcrystalline or nanocrystalline structures. The electrical conductivity of the microcrystalline host can be increased several orders of magnitude with the metal inclusion, while relatively high Seebeck coefficient can be simultaneously conserved. On the other hand, in nanostructured materials, the host crystallites are not able to sustain a band bending at its interface with the metal, becoming flooded with electrons. This translates into even higher electrical conductivities than the microcrystalline material, but at the expense of lower Seebeck coefficient values., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Scalable heating-up synthesis of monodisperse Cu2ZnSnS4 nanocrystals

  • Shavel, Alexey
  • Ibáñez Sabaté, Maria
  • Luo, Zhishan
  • De Roo, Jonathan
  • Carreté, Àlex
  • Dimitrievska, Mirjana
  • Genç, Aziz
  • Meyns, Michael
  • Pérez Rodríguez, Alejandro
  • Kovalenko, Maksym V.
  • Arbiol i Cobos, Jordi
  • Cabot i Codina, Andreu
Monodisperse Cu2ZnSnS4 (CZTS) nanocrystals (NCs), with quasi-spherical shape, were prepared by a facile, high-yield, scalable, and high-concentration heat-up procedure. The key parameters to minimize the NC size distribution were efficient mixing and heat transfer in the reaction mixture through intensive argon bubbling and improved control of the heating ramp stability. Optimized synthetic conditions allowed the production of several grams of highly monodisperse CZTS NCs per batch, with up to 5 wt % concentration in a crude solution and a yield above 90%.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thermoelectric properties of semiconductor-metal composites produced by particle blending

  • Liu, Yu
  • Cadavid, Doris
  • Ibañez, Maria
  • Ortega, Silvia
  • Marti-Sanchez, Sara
  • Dobrozhan, Oleksandr
  • Kovalenko, Maksym V.
  • Arbiol, Jordi
  • Cabot, Andreu
In the quest for more efficient thermoelectric material able to convert thermal to electrical energy and vice versa, composites that combine a semiconductor host having a large Seebeck coefficient with metal nanodomains that provide phonon scattering and free charge carriers are particularly appealing. Here, we present our experimental results on the thermal and electrical transport properties of PbS-metal composites produced by a versatile particle blending procedure, and where the metal work function allows injecting electrons to the intrinsic PbS host. We compare the thermoelectric performance of composites with microcrystalline or nanocrystalline structures. The electrical conductivity of the microcrystalline host can be increased several orders of magnitude with the metal inclusion, while relatively high Seebeck coefficient can be simultaneously conserved. On the other hand, in nanostructured materials, the host crystallites are not able to sustain a band bending at its interface with the metal, becoming flooded with electrons. This translates into even higher electrical conductivities than the microcrystalline material, but at the expense of lower Seebeck coefficient values., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High-performance thermoelectric nanocomposites from nanocrystal building blocks, High-performance thermoelectric nanocomposites from nanocrystal building blocks

  • Ibañez, Maria
  • Zhishan, Luo
  • Aziz, Genc
  • Piveteau, Laura
  • Ortega, Silvia
  • Cadavid, Doris
  • Dobrozhan, Oleksandr
  • Yu, Liu
  • Nachtegaal, Maarten
  • Zebarjadi, Mona
  • Arbio, Jordi
  • Kovalenko, Maksym V.
  • Cabot, Andreu
he efficient conversion between thermal and electrical energy by means of durable, silent and scalable solid-state thermoelectric devices has been a long standing goal. While nanocrystalline materials have already led to substantially higher thermoelectric efficiencies, further improvements are expected to arise from precise chemical engineering of nanoscale building blocks and interfaces. Here we present a simple and versatile bottom-up strategy based on the assembly of colloidal nanocrystals to produce consolidated yet nanostructured thermoelectric materials. In the case study on the PbS-Ag system, Ag nanodomains not only contribute to block phonon propagation, but also provide electrons to the PbS host semiconductor and reduce the PbS intergrain energy barriers for charge transport. Thus, PbS-Ag nanocomposites exhibit reduced thermal conductivities and higher charge carrier concentrations and mobilities than PbS nanomaterial. Such improvements of the material transport properties provide thermoelectric figures of merit up to 1.7 at 850 K., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Solution-based synthesis and processing of Sn- and Bi-doped Cu3SbSe4 nanocrystals, nanomaterials and ring-shaped thermoelectric generators

  • Liu, Yu
  • García, Gregorio
  • Ortega, Silvia
  • Cadavid, Doris
  • Palacios, Pablo
  • Lu, Yinju
  • Ibáñez, María
  • Xi, Lili
  • De Roo, Jonathan
  • López Martínez, Antonio Miguel
  • Martí-Sánchez, Sara
  • De la Mata, María
  • Albiol, Jordi
  • Cabot, Andreu
Copper-based chalcogenides that comprise abundant, low-cost, and environmental friendly elements are excellent materials for a number of energy conversion applications, including photovoltaics, photocatalysis, and thermoelectrics (TE). In such applications, the use of solution-processed nanocrystal (NC) to produce thin films or bulk nanomaterials has associated several potential advantages, such as high material yield and throughput, and composition control with unmatched spatial resolution and cost. Here we report on the production of Cu3SbSe4 (CASe) NCs with tuned amounts of Sn and Bi dopants. After proper ligand removal, as monitored by nuclear magnetic resonance and infrared spectroscopies, these NCs were used to produce dense CASe bulk nanomaterials for solid state TE energy conversion. By adjusting the amount of extrinsic dopants, dimensionless TE figures of merit (ZT) up to 1.26 at 673 K were reached. Such high ZT values are related to an optimized carrier concentration by Sn doping, a minimized lattice thermal conductivity due to efficient phonon scattering at point defects and grain boundaries, and to an increase of the Seebeck coefficient obtained by a modification of the electronic band structure with the Bi doping. Nanomaterials were further employed to fabricate ring-shaped TE generators to be coupled to hot pipes and which provided 20 mV and 1 mW per TE element when exposed to a 160 °C temperature gradient. The simple design and good thermal contact associated with the ring geometry and the potential low cost of the material solution processing may allow the fabrication of TE generators with short payback times., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Synthesis and thermoelectric properties of noble metal ternary chalcogenide systems of Ag-Au-Se in the forms of alloyed nanoparticles and colloidal nanoheterostructures

  • Dalmases Solé, Mariona
  • Ibañez, María
  • Torruella Besa, Pau
  • Fernàndez Altable, Víctor
  • López Conesa, Lluís
  • Cadavid, Doris
  • Piveteau, Laura
  • Nachtegaal, Maarten
  • Llorca, Jordi, 1966-
  • Ruiz González, María Luisa
  • Estradé Albiol, Sònia
  • Peiró Martínez, Francisca
  • Kovalenko, Maksym V.
  • Cabot i Codina, Andreu
  • Figuerola i Silvestre, Albert
The optimization of a material functionality requires both the rational design and precise engineering of its structural and chemical parameters. In this work, we show how colloidal chemistry is an excellent synthetic choice for the synthesis of novel ternary nanostructured chalcogenides, containing exclusively noble metals, with tailored morphology and composition and with potential application in the energy conversion field. Specifically, the Ag-Au-Se system has been explored from a synthetic point of view, leading to a set of Ag2Se-based hybrid and ternary nanoparticles, including the room temperature synthesis of the rare ternary Ag3AuSe2 fischesserite phase. An in-depth structural and chemical charac-terization of all nanomaterials has been performed, which proofed especially useful for unravelling the reaction mecha-nism behind the formation of the ternary phase in solution. The work is complemented with the thermal and electric characterization of a ternary Ag-Au-Se nanocomposite with promising results: we found that the use of the ternary nano-composite represents a clear improvement in terms of thermoelectric energy conversion as compared to a binary Ag-Se nanocomposite analogue.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Solution-based synthesis and processing of Sn- and Bi-doped Cu₃SbSe₄ nanocrystals, nanomaterials and ring-shaped thermoelectric generators

  • Liu, Yu|||0000-0001-7313-6740
  • Ortega, Silvia|||0000-0002-3812-5146
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Xi, Lili
  • De Roo, Jonathan
  • López Peña, Antonio M.|||0000-0002-6979-5783
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Cabezas, Ignasi
  • De La Mata, Maria|||0000-0002-1581-4838
  • Luo, Zhishan|||0000-0002-0801-9238
  • Dun, Chaochao
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Zhang, Wenqing
  • Martins, José
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Noriega, German
  • Song, Ji-Ming
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Copper-based chalcogenides that comprise abundant, low-cost, and environmental friendly elements are excellent materials for a number of energy conversion applications, including photovoltaics, photocatalysis, and thermoelectrics (TE). In such applications, the use of solution-processed nanocrystals (NCs) to produce thin films or bulk nanomaterials has associated several potential advantages, such as high material yield and throughput, and composition control with unmatched spatial resolution and cost. Here we report on the production of Cu₃SbSe₄ (CASe) NCs with tuned amounts of Sn and Bi dopants. After proper ligand removal, as monitored by nuclear magnetic resonance and infrared spectroscopy, these NCs were used to produce dense CASe bulk nanomaterials for solid state TE energy conversion. By adjusting the amount of extrinsic dopants, dimensionless TE figures of merit (ZT) up to 1.26 at 673 K were reached. Such high ZT values are related to an optimized carrier concentration by Sn doping, a minimized lattice thermal conductivity due to efficient phonon scattering at point defects and grain boundaries, and to an increase of the Seebeck coefficient obtained by a modification of the electronic band structure with Bi doping. Nanomaterials were further employed to fabricate ring-shaped TE generators to be coupled to hot pipes, which provided 20 mV and 1 mW per TE element when exposed to a 160 °C temperature gradient. The simple design and good thermal contact associated with the ring geometry and the potential low cost of the material solution processing may allow the fabrication of TE generators with short payback times.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High-performance thermoelectric nanocomposites from nanocrystal building blocks

  • Ibáñez, Maria|||0000-0001-5013-2843
  • Luo, Zhishan|||0000-0002-0801-9238
  • Genç, Aziz|||0000-0002-2888-2549
  • Piveteau, Laura
  • Ortega, Silvia|||0000-0002-3812-5146
  • Cadavid, Doris|||0000-0002-1376-6078
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Liu, Yu|||0000-0001-7313-6740
  • Nachtegaal, Maarten
  • Zebarjadi, Mona
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The efficient conversion between thermal and electrical energy by means of durable, silent and scalable solid-state thermoelectric devices has been a long standing goal. While nanocrystalline materials have already led to substantially higher thermoelectric efficiencies, further improvements are expected to arise from precise chemical engineering of nanoscale building blocks and interfaces. Here we present a simple and versatile bottom-up strategy based on the assembly of colloidal nanocrystals to produce consolidated yet nanostructured thermoelectric materials. In the case study on the PbS-Ag system, Ag nanodomains not only contribute to block phonon propagation, but also provide electrons to the PbS host semiconductor and reduce the PbS intergrain energy barriers for charge transport. Thus, PbS-Ag nanocomposites exhibit reduced thermal conductivities and higher charge carrier concentrations and mobilities than PbS nanomaterial. Such improvements of the material transport properties provide thermoelectric figures of merit up to 1.7 at 850 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Thermoelectric properties of semiconductor-metal composites produced by particle blending

  • Liu, Yu|||0000-0001-7313-6740
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Ortega, Silvia|||0000-0002-3812-5146
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the quest for more efficient thermoelectric material able to convert thermal to electrical energy and vice versa, composites that combine a semiconductor host having a large Seebeck coefficient with metal nanodomains that provide phonon scattering and free charge carriers are particularly appealing. Here, we present our experimental results on the thermal and electrical transport properties of PbS-metal composites produced by a versatile particle blending procedure, and where the metal work function allows injecting electrons to the intrinsic PbS host. We compare the thermoelectric performance of composites with microcrystalline or nanocrystalline structures. The electrical conductivity of the microcrystalline host can be increased several orders of magnitude with the metal inclusion, while relatively high Seebeck coefficient can be simultaneously conserved. On the other hand, in nanostructured materials, the host crystallites are not able to sustain a band bending at its interface with the metal, becoming flooded with electrons. This translates into even higher electrical conductivities than the microcrystalline material, but at the expense of lower Seebeck coefficient values.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Scalable Heating-Up Synthesis of Monodisperse Cu2ZnSnS4 Nanocrystals

  • Shavel, Alexey|||0000-0002-3995-0391
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Luo, Zhishan|||0000-0002-0801-9238
  • De Roo, Jonathan
  • Carrete, Alex
  • Dimitrievska, Mirjana|||0000-0002-9439-1019
  • Genç, Aziz|||0000-0002-2888-2549
  • Meyns, Michaela|||0000-0003-2476-9001
  • Pérez-Rodríguez, Alejandro
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Monodisperse CuZnSnS (CZTS) nanocrystals (NCs), with quasi-spherical shape, were prepared by a facile, high-yield, scalable, and high-concentration heat-up procedure. The key parameters to minimize the NC size distribution were efficient mixing and heat transfer in the reaction mixture through intensive argon bubbling and improved control of the heating ramp stability. Optimized synthetic conditions allowed the production of several grams of highly monodisperse CZTS NCs per batch, with up to 5wt% concentration in a crude solution and a yield above 90%.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Crystallographically textured nanomaterials produced from the liquid phase sintering of BixSb₂-xTe₃ nanocrystal building blocks

  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Ortega, Silvia|||0000-0002-3812-5146
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Grau Carbonell, Albert
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Ng, Ka Ming
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cadavid, Doris|||0000-0002-1376-6078
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Bottom-up approaches for producing bulk nanomaterials have traditionally lacked control over the crystallographic alignment of nanograins. This limitation has prevented nanocrystal-based nanomaterials from achieving optimized performances in numerous applications. Here we demonstrate the production of nanostructured BixSb₂-xTe₃ alloys with controlled stoichiometry and crystallographic texture through proper selection of the starting building blocks and the adjustment of the nanocrystal-to-nanomaterial consolidation process. In particular, we hot pressed disk-shaped BixSb₂-xTe₃ nanocrystals and tellurium nanowires using multiple pressure and release steps at a temperature above the tellurium melting point. We explain the formation of the textured nanomaterials though a solution-reprecipitation mechanism under a uniaxial pressure. Additionally, we further demonstrate these alloys to reach unprecedented thermoelectric figures of merit, up to ZT = 1.96 at 420 K, with an average value of ZT = 1.77 for the record material in the temperature range 320-500 K, thus potentially allowing up to 60% higher energy conversion efficiencies than commercial materials.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High Thermoelectric Performance in Crystallographically Textured n-Type Bi2Te3- xSex Produced from Asymmetric Colloidal Nanocrystals

  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Ortega, Silvia|||0000-0002-3812-5146
  • Li, Mengyao|||0000-0002-9082-7938
  • David, Jérémy|||0000-0003-3219-149X
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Ng, Ka Ming
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cadavid, Doris|||0000-0002-1376-6078
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the present work, we demonstrate crystallographically textured n-type BiTeSe nanomaterials with exceptional thermoelectric figures of merit produced by consolidating disk-shaped BiTeSe colloidal nanocrystals (NCs). Crystallographic texture was achieved by hot pressing the asymmetric NCs in the presence of an excess of tellurium. During the hot press, tellurium acted both as lubricant to facilitate the rotation of NCs lying close to normal to the pressure axis and as solvent to dissolve the NCs approximately aligned with the pressing direction, which afterward recrystallize with a preferential orientation. NC-based BiTeSe nanomaterials showed very high electrical conductivities associated with large charge carrier concentrations, n. We hypothesize that such large n resulted from the presence of an excess of tellurium during processing, which introduced a high density of donor Te antisites. Additionally, the presence in between grains of traces of elemental Te, a narrow band gap semiconductor with a work function well below BiTeSe, might further contribute to increase n through spillover of electrons, while at the same time blocking phonon propagation and hole transport through the nanomaterial. NC-based BiTeSe nanomaterials were characterized by very low thermal conductivities in the pressing direction, which resulted in ZT values up to 1.31 at 438 K in this direction. This corresponds to a ca. 40% ZT enhancement from commercial ingots. Additionally, high ZT values were extended over wider temperature ranges due to reduced bipolar contribution to the Seebeck coefficient and the thermal conductivity. Average ZT values up to 1.15 over a wide temperature range, 320 to 500 K, were measured, which corresponds to a ca. 50% increase over commercial materials in the same temperature range. Contrary to most previous works, highest ZT values were obtained in the pressing direction, corresponding to the c crystallographic axis, due to the predominance of the thermal conductivity reduction over the electrical conductivity difference when comparing the two crystal directions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ligand-mediated band engineering in bottom-up assembled SnTe nanocomposites for thermoelectric energy conversion

  • Ibáñez, Maria|||0000-0001-5013-2843
  • Hasler, Roger
  • Genç, Aziz|||0000-0002-2888-2549
  • Liu, Yu|||0000-0001-7313-6740
  • Kuster, Beatrice
  • Schuster, Maximilian
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Cadavid, Doris|||0000-0002-1376-6078
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
The bottom-up assembly of colloidal nanocrystals is a versatile methodology to produce composite nanomaterials with precisely tuned electronic properties. Beyond the synthetic control over crystal domain size, shape, crystal phase, and composition, solution-processed nanocrystals allow exquisite surface engineering. This provides additional means to modulate the nanomaterial characteristics and particularly its electronic transport properties. For instance, inorganic surface ligands can be used to tune the type and concentration of majority carriers or to modify the electronic band structure. Herein, we report the thermoelectric properties of SnTe nanocomposites obtained from the consolidation of surface-engineered SnTe nanocrystals into macroscopic pellets. A CdSe-based ligand is selected to (i) converge the light and heavy bands through partial Cd alloying and (ii) generate CdSe nanoinclusions as a secondary phase within the SnTe matrix, thereby reducing the thermal conductivity. These SnTe-CdSe nanocomposites possess thermoelectric figures of merit of up to 1.3 at 850 K, which is, to the best of our knowledge, the highest thermoelectric figure of merit reported for solution-processed SnTe.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tuning transport properties in thermoelectric nanocomposites through inorganic ligands and heterostructured building blocks

  • Ibáñez, Maria|||0000-0001-5013-2843
  • Genç, Aziz|||0000-0002-2888-2549
  • Hasler, Roger
  • Liu, Yu|||0000-0001-7313-6740
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Nazarenko, Olga
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
Methodologies that involve the use of nanoparticles as "artificial atoms" to rationally build materials in a bottom-up fashion are particularly well-suited to control the matter at the nanoscale. Colloidal synthetic routes allow for an exquisite control over such "artificial atoms" in terms of size, shape, and crystal phase as well as core and surface compositions. We present here a bottom-up approach to produce Pb-Ag-K-S-Te nanocomposites, which is a highly promising system for thermoelectric energy conversion. First, we developed a high-yield and scalable colloidal synthesis route to uniform lead sulfide (PbS) nanorods, whose tips are made of silver sulfide (AgS). We then took advantage of the large surface-to-volume ratio to introduce a p-type dopant (K) by replacing native organic ligands with KTe. Upon thermal consolidation, KTe-surface modified PbS-AgS nanorods yield p-type doped nanocomposites with PbTe and PbS as major phases and AgS and AgTe as embedded nanoinclusions. Thermoelectric characterization of such consolidated nanosolids showed a high thermoelectric figure-of-merit of 1 at 620 K.