Pasar al contenido principal

FOTOELECTROCATALISIS, DISPOSITIVOS FOTOELECTROSINTETICOS, MICROSCOPIA ELECTRONICA AVANZADA

ENE2017-85087-C3-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT JAUME I DE CASTELLO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High thermoelectric performance in crystallographically textured n-type Bi2Te3–xSex produced from asymmetric colloidal nanocrystals

  • Liu, Yu
  • Lim, Khak Ho
  • Ibáñez, María
  • Ortega, Silvia
  • Li, Mengyao
  • David, Jeremy
  • Martí-Sànchez, Sara
  • Ng, Ka Ming
  • Arbiol, Jordi
  • Kovalenko, Maksym V.
  • Cadavid, Doris
  • Cabot, Andreu
In the present work, we demonstrate crystallographically textured n-type Bi2Te3–xSex nanomaterials with exceptional thermoelectric figures of merit produced by consolidating disk-shaped Bi2Te3–xSex colloidal nanocrystals (NCs). Crystallographic texture was achieved by hot pressing the asymmetric NCs in the presence of an excess of tellurium. During the hot press, tellurium acted both as lubricant to facilitate the rotation of NCs lying close to normal to the pressure axis and as solvent to dissolve the NCs approximately aligned with the pressing direction, which afterward recrystallize with a preferential orientation. NC-based Bi2Te3–xSex nanomaterials showed very high electrical conductivities associated with large charge carrier concentrations, n. We hypothesize that such large n resulted from the presence of an excess of tellurium during processing, which introduced a high density of donor TeBi antisites. Additionally, the presence in between grains of traces of elemental Te, a narrow band gap semiconductor with a work function well below Bi2Te3–xSex, might further contribute to increase n through spillover of electrons, while at the same time blocking phonon propagation and hole transport through the nanomaterial. NC-based Bi2Te3–xSex nanomaterials were characterized by very low thermal conductivities in the pressing direction, which resulted in ZT values up to 1.31 at 438 K in this direction. This corresponds to a ca. 40% ZT enhancement from commercial ingots. Additionally, high ZT values were extended over wider temperature ranges due to reduced bipolar contribution to the Seebeck coefficient and the thermal conductivity. Average ZT values up to 1.15 over a wide temperature range, 320 to 500 K, were measured, which corresponds to a ca. 50% increase over commercial materials in the same temperature range. Contrary to most previous works, highest ZT values were obtained in the pressing direction, corresponding to the c crystallographic axis, due to the predominance of the thermal conductivity reduction over the electrical conductivity difference when comparing the two crystal directions., This work was supported by the European Regional Development Funds. Y.L. and Y.Z. thank the China Scholarship Council for scholarship support. M.V.K. acknowledges partial financial support by the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA no. 306733). S.M.S. acknowledges funding from “Programa Internacional de Becas “la Caixa”-Severo Ochoa”. J.D. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 665919. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and IREC from 2017 SGR 1246. ICN2 members acknowledge support from the Severo Ochoa Programme (MINECO, grant no. SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya. J.A., S.M.S., and J.D. acknowledge funding from MINECO subproject ANAPHASE (ENE2017-85087-C3)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lead sulfide nanocubes for solar energy storage

  • Lemsi, Amira
  • Cardenas-Morcoso, Drialys
  • Haro, Marta
  • Gil-Barrachina, Carlos
  • Aranda, Clara
  • Maghraoui-Meherzi, Hager
  • García-Tecedor, Miguel
  • Giménez, Sixto
  • Julián-López, Beatriz
Lead sulfide (PbS) nanocubes are produced by a very simple solvothermal procedure that uses a unique molecule, ethylenediamine, as solvent and capping ligand to control the size and shape of the nanocrystals. Detailed structural, optical, and photoelectrochemical evaluation confirms the suitability of these nanoparticles for photocapacitive applications, when synergistically combined with spin‐coated BiVO4 photoelectrodes, as derived from the estimated energy diagram. Furthermore, the p–n junction facilitates the photo‐oxidation of PbS nanoparticles under light irradiation. In the dark, the photogenerated charges are released providing an electric output response with a solar‐to‐current efficiency of 0.042%, storing extra energy to the H2 produced by water splitting when the BiVO4 photoanode works under illumination. Herein, the importance of the synthetic route and methodology to ensemble materials for advanced solar energy storage applications is highlighted., We acknowledge financial support from the Ministerio de Ciencia, Innovación y Universidades, Spain through the project number ENE2017‐85087‐C3‐1‐R and Ramon y Cajal Fellowship (grant no. RYC‐2018‐025222‐I). Universitat Jaume I is also acknowledged for funding (project UJI—B2018‐71). Université de Tunis El‐Manar also acknowledges the Tunisian Ministry of Higher Education and Scientific Research (MHESR) for the financial support of this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Doping-mediated stabilization of copper vacancies to promote thermoelectric properties of Cu2−xS

  • Zhang, Yu
  • Xing, Congcong
  • Liu, Yu
  • Spadaro, Maria Chiara
  • Wang, Xiang
  • Li, Mengyao
  • Xiao, Ke
  • Zhang, Ting
  • Guardia, Pablo
  • Lim, Khak Ho
  • Ostovari Moghaddam, Ahmad
  • Llorca, Javier
  • Arbiol, Jordi
  • Ibáñez, María
  • Cabot, Andreu
Copper chalcogenides are outstanding thermoelectric materials for applications in the medium-high temperature range. Among different chalcogenides, while CuSe is characterized by higher thermoelectric figures of merit, CuS provides advantages in terms of low cost and element abundance. In the present work, we investigate the effect of different dopants to enhance the CuS performance and also its thermal stability. Among the tested options, Pb-doped CuS shows the highest improvement in stability against sulfur volatilization. Additionally, Pb incorporation allows tuning charge carrier concentration, which enables a significant improvement of the power factor. We demonstrate here that the introduction of an optimal additive amount of just 0.3% results in a threefold increase of the power factor in the middle-temperature range (500–800 K) and a record dimensionless thermoelectric figure of merit above 2 at 880 K., This work was supported by the European Regional Development Fund and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). MI acknowledges financial support from IST Austria. YL acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. YZ, CX, XW, KX and TZ thank the China Scholarship Council for the scholarship support. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA program/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. M.C.S. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754510 (PROBIST) and the Severo Ochoa programme. P.G. acknowledges financial support from the Spanish government (MICIU) through the RTI2018-102006-J-I00 project and the Catalan Agency of Competitiveness (ACCIO) through the TecnioSpring+ Marie Sklodowska-Curie action TECSPR16-1-0082. YZ and CX contributed equally to this work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facing Seawater Splitting Challenges by Regeneration with Ni−Mo−Fe Bifunctional Electrocatalyst for Hydrogen and Oxygen Evolution

  • Ros, Carles
  • Murcia-López, Sebastián
  • Garcia, Xènia
  • Rosado, Marcos
  • Arbiol, Jordi
  • Llorca, Jordi
  • Morante, Javier
Hydrogen, produced by water splitting, has been proposed as one of the main green energy vectors of the future if produced from renewable energy sources. However, to substitute fossil fuels, large amounts of pure water are necessary, scarce in many world regions. In this work, we fabricate efficient and earth-abundant electrodes, study the challenges of using real seawater, and propose an electrode regeneration method to face undesired salt deposition. Ni−Mo−Fe trimetallic electrocatalyst is deposited on non-expensive graphitic carbon felts both for hydrogen (HER) and oxygen evolution reactions (OER) in seawater and alkaline seawater. Cl pitting and the chlorine oxidation reaction are suppressed on these substrates and alkalinized electrolyte. Precipitations on the electrodes, mainly CaCO, originating from seawater-dissolved components have been studied, and a simple regeneration technique is proposed to rapidly dissolve undesired deposited CaCO in acidified seawater. Under alkaline conditions, Ni−Mo−Fe-based catalyst is found to reconfigure, under cathodic bias, into Ni−Mo−Fe alloy with a cubic crystalline structure and Ni : Fe(OH) redeposits whereas, under anodic bias, it is transformed into a follicular Ni:FeOOH structure. High productivities over 300 mA cm and voltages down to 1.59 V@10 mA cm for the overall water splitting reaction have been shown, and electrodes are found stable for over 24 h without decay in alkaline seawater conditions and with energy efficiency higher than 61.5 % which makes seawater splitting promising and economically feasible., Authors from IREC acknowledge Generalitat de Catalunya for financial support through the CERCA Programme. J.R.M. acknowledges Generalitat de Catalunya for financial support through the CERCA Programme, M2E (2017 SGR 1246). IREC and ICN2 also acknowledge additional support by the European Regional Development Funds (ERDF, FEDER) and by MINECO coordinated project ENE2017-85087-C3. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 acknowledges funding from Generalitat de Catalunya SEV-2017-0706). J.L. and X.G. are grateful to projects MICINN/FEDER RTI2018-093996-B−C31 and Generalitat de Catalunya 2017 SGR 128. X.G. is grateful to Generalitat de Catalunya for PhD grant 2017 FI_B 00137. JL is a Serra Húnter fellow and is grateful to ICREA Academia program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Observation of the Chemical Transformations in BiVO4 Photoanodes upon Prolonged Light-Aging Treatments

  • Arcas, Ramón
  • Cardenas-Morcoso, Drialys
  • Spadaro, Maria Chiara
  • García-Tecedor, Miguel
  • Mesa, Camilo A.
  • Arbiol, Jordi
  • Fabregat-Santiago, Francisco
  • Giménez, Sixto
  • Mas-Marzá, Elena
Exposing BiVO photoanodes to light-aging treatments is known to produce a significant photocurrent enhancement. Until now, the interpretation given to this phenomenon is associated to the formation of oxygen vacancies and little is reported about chemical changes in the material. Herein, the chemical segregation of Bi species toward the surface upon light-aging treatment is demonstrated, which takes place with the concomitant formation of intra-bandgap states associated to the oxygen vacancies. It is further demonstrated that these intra-bandgap states are photoactive and generate photocurrent under infrared excitation. These results highlight the importance of understanding light-induced effects while employing multinary metal oxide photoelectrodes., The authors thank support from the projects ENE2017-85087-C3-1-R, PID2020-116093RB-C41, PID2020-116093RB -C43 and Network of Excellence CAT&SCALE (RED2018-102459-T), funded by MCIN/ AEI/10.13039/501100011033. University Jaume I (UJI-B2019-20) and Generalitat Valenciana (PROMETEO/2020/028) are also acknowledged for financial support. Serveis Centrals d’Instrumentació Científica from UJI are also acknowledged for SEM, TEM, Raman, and XRD measurements. M.C.S. and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. M.C.S. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement no. 754510 (PROBIST) and the Severo Ochoa programme. C.A.M. acknowledges the University Jaume I for the postdoc fellowship POSDOC/2019/20 and Generalitat Valenciana for the APOSTD/2021/251 fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enabling full-scale grain boundary mitigation in polycrystalline perovskite solids

  • Zhao, Lichen
  • Tang, Peng-Yi
  • Luo, Deying
  • Dar, M. Ibrahim
  • Eickemeyer, Félix T.
  • Arora, Neha
  • Hu, Qin
  • Luo, Jingshan
  • Liu, Yuhang
  • Zakeeruddin, Shaik Mohammed
  • Hagfeldt, Anders
  • Arbiol, Jordi
  • Huang, Wei
  • Gong, Qihuang
  • Russell, Thomas P.
  • Friend, Richard H.
  • Grätzel, Michael
  • Zhu, Rui
There exists a considerable density of interaggregate grain boundaries (GBs) and intra-aggregate GBs in polycrystalline perovskites. Mitigation of intra-aggregate GBs is equally notable to that of interaggregate GBs as intra-aggregate GBs can also cause detrimental effects on the photovoltaic performances of perovskite solar cells (PSCs). Here, we demonstrate full-scale GB mitigation ranging from nanoscale intra-aggregate to submicron-scale interaggregate GBs, by modulating the crystallization kinetics using a judiciously designed brominated arylamine trimer. The optimized GB-mitigated perovskite films exhibit reduced nonradiative recombination, and their corresponding mesostructured PSCs show substantially enhanced device efficiency and long-term stability under illumination, humidity, or heat stress. The versatility of our strategy is also verified upon applying it to different categories of PSCs. Our discovery not only specifies a rarely addressed perspective concerning fundamental studies of perovskites at nanoscale but also opens a route to obtain high-quality solution-processed polycrystalline perovskites for high-performance optoelectronic devices., This work was financially supported by Beijing Natural Science Foundation (JQ21005), the National Key R&D Program of China (2021YFB3800100 and 2021YFB3800101), the National Natural Science Foundation of China (91733301 and 62104221), the China Postdoctoral Science Foundation (2020M670036), and the R&D Fruit Fund (20210001). M.G. and S.M.Z. thank the King Abdulaziz City for Science and Technology (KACST) for financial support. M.I.D. acknowledges funding from the Royal Society. N.A. and R.H.F. thank the EPSRC project SUNRISE (EP/P032591/1). Q.H. and T.P.R. were supported by the U.S. Office of Naval Research under contract N00014-17-1-2241. Q.H. thanks the support from USTC Research funds of the Double First-Class Initiative (YD2100002007). We thank the support for sample preparation at Molecular Foundry of Lawrence Berkeley National Laboratory (LBNL), which is supported by the Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under contract no. DE-AC02-05CH11231. We also acknowledge the GIXD measurements at beamline 7.3.3 of Advanced Light Source (LBNL), which is a DOE Office of Science User Facility under contract no. DE-AC02-05CH11231. P.T. and J.A. acknowledge the funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FeS2-Decorated Carbon NanoFiber as Solid Phase Conversion-Type Cathode for Li-S Batteries

  • Jacas Biendicho, Jordi
  • Mazaira, Pedro
  • Avireddy, Hemesh
  • Zhang, Chaoqi
  • Tang, Peng-Yi
  • Missyul, Alexander
  • Trilla, Lluis
  • Arbiol, Jordi
  • Morante, Joan Ramón
  • Cabot, Andreu
A new cathode material, FeS2-decorated carbon nanofiber (CNF), is proposed for Li-S batteries. The structure and physicochemical properties of the material have been engineered to enhance the poor cycling stability typically displayed by sulfur composites. The composite material shows a complex architecture with a matrix of CNF hosting the sulfur and core-shell FeS2 nanoparticles acting as a catalyst for a solid phase conversion-type reaction. This cathode delivers high discharge capacities of 864, 798, 689, 595 and 455 mAhg−1 at C/10, C/5, C/2, 1C and 2C, respectively, with a stable capacity retention of 87% at 2C after 300 cycles. FeS2-decorated CNF has been characterised using several techniques, including in-situ battery measurements at the ALBA synchrotron facility and high-throughput microscopy, giving valuable insights into its charge/discharge reaction mechanism. The excellent performance obtained is combined with the use of just low-cost and abundant elements such as iron, sulfur and carbon, which makes this battery highly promising for the next generation of electrochemical energy storage devices., The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457 the Spanish MINECO project ENE2017-85087-C3. IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. The authors thank support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEIN (Grant No.: CEX2021-001214-S). IREC acknowledges additional support from the European Regional Development Funds (ERDF, FEDER). Jordi Jacas Biendicho acknowledges the fellowship RYC2021-034994-I, funded by MCIN/AEI/10.13039/501100011033 and the European Union «NextGenerationEU»/PRTR». In-situ diffraction measurements experiments were performed at BL04-MSPD beamline at ALBA Synchrotron with the collaboration of ALBA staff under proposal number 2016091931., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Lead Sulfide Nanocubes for Solar Energy Storage

  • Lemsi, A.
  • Cardenas-Morcoso, D.
  • Haro, M.
  • Gil-Barrachina, C.
  • Aranda, C.
  • Maghraoui-Meherzi, H.
  • García-Tecedor, M.
  • Giménez, S.
  • Julián-López, B.
Lead sulfide (PbS) nanocubes are produced by a very simple solvothermal procedure that uses a unique molecule, ethylenediamine, as solvent and capping ligand to control the size and shape of the nanocrystals. Detailed structural, optical, and photoelectrochemical evaluation confirms the suitability of these nanoparticles for photocapacitive applications, when synergistically combined with spin-coated BiVO4 photoelectrodes, as derived from the estimated energy diagram. Furthermore, the p–n junction facilitates the photo-oxidation of PbS nanoparticles under light irradiation. In the dark, the photogenerated charges are released providing an electric output response with a solar-to-current efficiency of 0.042%, storing extra energy to the H2 produced by water splitting when the BiVO4 photoanode works under illumination. Herein, the importance of the synthetic route and methodology to ensemble materials for advanced solar energy storage applications is highlighted.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Direct observation of the chemical transformations in BiVO4 photoanodes upon prolonged light-aging treatments

  • Arcas, Ramón
  • Cardenas-Morcoso, Drialys
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • García-Tecedor, Miguel|||0000-0002-9664-4665
  • Mesa, Camilo A.|||0000-0002-8450-2563
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fabregat-Santiago, Francisco
  • Giménez, Sixto|||0000-0002-4522-3174
  • Mas-Marzá, Elena
Exposing BiVO photoanodes to light-aging treatments is known to produce a significant photocurrent enhancement. Until now, the interpretation given to this phenomenon is associated to the formation of oxygen vacancies and little is reported about chemical changes in the material. Herein, the chemical segregation of Bi species toward the surface upon light-aging treatment is demonstrated, which takes place with the concomitant formation of intra-bandgap states associated to the oxygen vacancies. It is further demonstrated that these intra-bandgap states are photoactive and generate photocurrent under infrared excitation. These results highlight the importance of understanding light-induced effects while employing multinary metal oxide photoelectrodes.